Attachment 37896 Details for Bug 29575 – dmesg

[patch] dmesg

dmesg (text/plain), 30.24 KB, created by BRULE Herman on 2010-08-16 07:05:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: BRULE Herman

Created: 2010-08-16 07:05:57 UTC

Size: 30.24 KB

patch

obsolete

> [io  0x18e4-0x18e7]
>pci 0000:00:1f.2: reg 18: [io  0x18e8-0x18ef]
>pci 0000:00:1f.2: reg 1c: [io  0x18e0-0x18e3]
>pci 0000:00:1f.2: reg 20: [io  0x18c0-0x18df]
>pci 0000:00:1f.2: reg 24: [mem 0xfc504000-0xfc5047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
>pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfc00ffff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xfc010000-0xfc013fff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfc0fffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8001fff 64bit]
>pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 04-05]
>pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 06-07]
>pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
>pci 0000:08:00.0: reg 10: [mem 0xfc100000-0xfc10ffff 64bit]
>pci 0000:08:00.0: PME# supported from D3hot D3cold
>pci 0000:08:00.0: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 08-08]
>pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.5:   bridge window [mem 0xfc100000-0xfc1fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:09:01.0: reg 10: [mem 0xfc200000-0xfc2007ff]
>pci 0000:09:01.0: supports D1 D2
>pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.0: PME# disabled
>pci 0000:09:01.1: reg 10: [mem 0xfc200800-0xfc2008ff]
>pci 0000:09:01.1: supports D1 D2
>pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.1: PME# disabled
>pci 0000:09:01.2: reg 10: [mem 0xfc200c00-0xfc200cff]
>pci 0000:09:01.2: supports D1 D2
>pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.2: PME# disabled
>pci 0000:09:01.3: reg 10: [mem 0xfc201000-0xfc2010ff]
>pci 0000:09:01.3: supports D1 D2
>pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.3: PME# disabled
>pci 0000:09:01.4: reg 10: [mem 0xfc201400-0xfc2014ff]
>pci 0000:09:01.4: supports D1 D2
>pci 0000:09:01.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:09:01.4: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfc200000-0xfc2fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>Unable to assume PCIe control: Disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009c400 - 000000000009ffff 
>reserve RAM buffer: 00000000bdaa1000 - 00000000bfffffff 
>reserve RAM buffer: 00000000bdbba000 - 00000000bfffffff 
>reserve RAM buffer: 00000000bdd08000 - 00000000bfffffff 
>reserve RAM buffer: 00000000bdf18000 - 00000000bfffffff 
>reserve RAM buffer: 00000000bdf63000 - 00000000bfffffff 
>reserve RAM buffer: 00000000bdfe3000 - 00000000bfffffff 
>reserve RAM buffer: 00000000be000000 - 00000000bfffffff 
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Calling CRDA to update world regulatory domain
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:04: [io  0x0400-0x047f] has been reserved
>system 00:04: [io  0x0680-0x069f] has been reserved
>system 00:04: [io  0x0480-0x048f] has been reserved
>system 00:04: [io  0xffff] has been reserved
>system 00:04: [io  0xffff] has been reserved
>system 00:04: [io  0x1000-0x107f] has been reserved
>system 00:04: [io  0x1180-0x11ff] has been reserved
>system 00:04: [io  0x164e-0x164f] has been reserved
>system 00:04: [io  0xfe00] has been reserved
>system 00:04: [io  0x0900-0x097f] has been reserved
>system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:08: [mem 0xfeb00000-0xfeb03fff] has been reserved
>system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
>pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
>pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
>pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0200000-0xc02000ff 64bit]
>pci 0000:00:1f.3: BAR 0: set to [mem 0xc0200000-0xc02000ff 64bit] (PCI address [0xc0200000-0xc02000ff]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfc020000-0xfc03ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfc0fffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 04-05]
>pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 06-07]
>pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 08-08]
>pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1c.5:   bridge window [mem 0xfc100000-0xfc1fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 09-09]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfc200000-0xfc2fffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
>pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
>pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
>pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
>pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
>pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
>pci_bus 0000:09: resource 1 [mem 0xfc200000-0xfc2fffff]
>pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:09: resource 10 [mem 0xc0000000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
>software IO TLB at phys 0x5a00000 - 0x9a00000
>Simple Boot Flag at 0x36 set to 0x1
>microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
>microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Intel AES-NI instructions are not detected.
>fuse init (API version 7.15)
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>Btrfs loaded
>msgmni has been set to 7848
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
>ACPI: AC Adapter [ADP1] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI Warning: _BQC returned an invalid level (20100702/video-640)
>acpi device:02: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4
>ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
>ACPI: acpi_idle registered with cpuidle
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (40 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (29 C)
>thermal LNXTHERM:03: registered as thermal_zone2
>ACPI: Thermal Zone [TZ02] (44 C)
>ACPI: Battery Slot [BAT0] (battery present)
>Generic RTC Driver v1.07
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>[drm:drm_init], 
>[drm:drm_get_pci_dev], 
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 0
>[drm] initializing kernel modesetting (RV710 0x1002:0x9553).
>[drm] register mmio base: 0xFC000000
>[drm] register mmio size: 65536
>radeon 0000:01:00.0: Invalid ROM contents
>radeon 0000:01:00.0: Invalid ROM contents
>[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
>radeon 0000:01:00.0: Fatal error during GPU init
>[drm] radeon: finishing device.
>[TTM] Memory type 2 has not been initialized.
>[drm:drm_put_minor], release secondary minor 0
>[drm:drm_put_minor], release secondary minor 64
>radeon 0000:01:00.0: PCI INT A disabled
>radeon: probe of 0000:01:00.0 failed with error -22
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>loop: module loaded
>SCSI Media Changer driver v0.25 
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 45
>ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 45
>ata3: DUMMY
>ata4: DUMMY
>ata5: DUMMY
>ata6: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504380 irq 45
>tg3.c:v3.113 (August 2, 2010)
>tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:08:00.0: setting latency timer to 64
>tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 5784100] (PCI Express) MAC address 00:22:19:fa:cf:b4
>tg3 0000:08:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
>iwlagn: Copyright(c) 2003-2010 Intel Corporation
>iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:04:00.0: setting latency timer to 64
>iwlagn 0000:04:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
>iwlagn 0000:04:00.0: device EEPROM VER=0x120, CALIB=0x4
>iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:04:00.0: irq 46 for MSI/MSI-X
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.35-git14-dell ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.35-git14-dell ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.35-git14-dell uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.35-git14-dell uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.35-git14-dell uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.35-git14-dell uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.35-git14-dell uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.35-git14-dell uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>lirc_dev: IR Remote Control driver registered, major 253 
>IR NEC protocol handler initialized
>IR RC5(x) protocol handler initialized
>IR RC6 protocol handler initialized
>IR JVC protocol handler initialized
>IR Sony protocol handler initialized
>IR LIRC bridge handler initialized
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>Bluetooth: HCI UART driver ver 2.2
>Bluetooth: HCI H4 protocol initialized
>Bluetooth: HCI BCSP protocol initialized
>Bluetooth: HCILL protocol initialized
>Bluetooth: Broadcom Blutonium firmware driver ver 1.2
>usbcore: registered new interface driver bcm203x
>Bluetooth: Digianswer Bluetooth USB driver ver 0.10
>usbcore: registered new interface driver bpa10x
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>Bluetooth: Atheros AR30xx firmware driver ver 1.0
>usbcore: registered new interface driver ath3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
>sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
>sdhci-pci 0000:09:01.2: SDHCI controller found [1180:0843] (rev 12)
>sdhci-pci 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>mmc1: SDHCI controller on PCI [0000:09:01.2] using DMA
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ioatdma: Intel(R) QuickData Technology Driver 4.00
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X
>HDA Intel 0000:01:00.1: setting latency timer to 64
>ALSA device list:
>  #0: HDA Intel at 0xfc500000 irq 47
>  #1: HDA ATI HDMI at 0xfc010000 irq 48
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>NET: Registered protocol family 17
>Bridge firewalling registered
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SCTP: Hash tables configured (established 65536 bind 65536)
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>Registering the dns_resolver key type
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD16, max UDMA/100
>ata2.00: configured for UDMA/100
>ata1.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-7 11.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640S HD16 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 1-6: new high speed USB device using ehci_hcd and address 3
>usb 1-6: New USB device found, idVendor=0c45, idProduct=63eb
>usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>usb 1-6: Product: Laptop_Integrated_Webcam_2M
>usb 1-6: Manufacturer: M092S-H00-9702-SC2VW
>uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63eb)
>input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9
>Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
>registered taskstats version 1
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext3 filesystem) on device 8:6.
>Freeing unused kernel memory: 480k freed
>usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: BCM2046B1
>usb 3-1: Manufacturer: Broadcom
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>usb 3-1.1: new full speed USB device using uhci_hcd and address 3
>usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157
>usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input11
>generic-usb 0003:413C:8157.0001: input: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
>usb 3-1.2: new full speed USB device using uhci_hcd and address 4
>usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158
>usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input12
>generic-usb 0003:413C:8158.0002: input: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
>udev: starting version 160
>udevd (1547): /proc/1547/oom_adj is deprecated, please use /proc/1547/oom_score_adj instead.
>iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ACPI: resource 0000:00:1f.3 [io  0x1c00-0x1c1f] conflicts with ACPI region SMBI [io  0x1c00-0x1c0f pref disabled]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>usb 3-1.3: new full speed USB device using uhci_hcd and address 5
>usb 3-1.3: New USB device found, idVendor=413c, idProduct=8156
>usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
>usb 3-1.3: Manufacturer: Dell Computer Corp
>EXT4-fs (sda6): re-mounted. Opts: (null)
>EXT4-fs (sda6): re-mounted. Opts: (null)
>Adding 4883724k swap on /dev/sda5.  Priority:-1 extents:1 across:4883724k 
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:08:00.0: irq 49 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex
>tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>ata1.00: configured for UDMA/133
>ata1: EH complete
>EXT4-fs (sda6): re-mounted. Opts: commit=0
>tg3 0000:08:00.0: PME# enabled
>tg3 0000:08:00.0: wake-up capability enabled by ACPI
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>tg3 0000:08:00.0: wake-up capability disabled by ACPI
>tg3 0000:08:00.0: PME# disabled
>tg3 0000:08:00.0: irq 49 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex
>tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View | Splinter Review

Attachments on bug 29575: 37896 | 37897 | 38088 | 38108

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.