Attachment 38748 Details for Bug 29095 – dmesg with pci=noacpi from linus' tree HEAD 9c03f16

dmesg with pci=noacpi from linus' tree HEAD 9c03f16

dmesg.9c03f16.noacpi (text/plain), 35.91 KB, created by Tom Stellard on 2010-09-16 10:14:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Stellard

Created: 2010-09-16 10:14:01 UTC

Size: 35.91 KB

patch

obsolete

>Linux version 2.6.36-rc4-00076-g9c03f16 (root@thinkpadr51e) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #175 SMP Thu Sep 16 00:24:22 PDT 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
> BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002bee0000 (usable)
> BIOS-e820: 000000002bee0000 - 000000002beeb000 (ACPI data)
> BIOS-e820: 000000002beeb000 - 000000002bf00000 (ACPI NVS)
> BIOS-e820: 000000002bf00000 - 000000002c000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>MPS support code is not built-in.
>Using acpi=off or acpi=noirq or pci=noacpi may have problem
>DMI present.
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x2bee0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 base 020000000 mask FF8000000 write-back
>  2 base 028000000 mask FFC000000 write-back
>  3 base 02BF00000 mask FFFF00000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-000000002bee0000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 002bc00000 page 2M
> 002bc00000 - 002bee0000 page 4k
>kernel direct mapping tables up to 2bee0000 @ 7000-c000
>ACPI: RSDP 000f6c80 00024 (v02 IBM   )
>ACPI: XSDT 2bee1879 00054 (v01 IBM    TP-78    00001580  LTP 00000000)
>ACPI: FACP 2bee1900 000F4 (v03 IBM    TP-78    00001580 IBM  00000001)
>ACPI Error: 32/64X address mismatch in Gpe0Block: 0x00008020/0x0000000000008028, using 32 (20100702/tbfadt-427)
>ACPI: DSDT 2bee1ae7 092BB (v01 IBM    TP-78    00001580 MSFT 0100000E)
>ACPI: FACS 2beec000 00040
>ACPI: SSDT 2bee1ab4 00033 (v01 IBM    TP-78    00001580 MSFT 0100000E)
>ACPI: ECDT 2beeada2 00052 (v01 IBM    TP-78    00001580 IBM  00000001)
>ACPI: APIC 2beeadf4 0005A (v01 IBM    TP-78    00001580 IBM  00000001)
>ACPI: MCFG 2beeae4e 0003E (v01 IBM    TP-78    00001580 IBM  00000001)
>ACPI: BOOT 2beeafd8 00028 (v01 IBM    TP-78    00001580  LTP 00000001)
>702MB LOWMEM available.
>  mapped low ram: 0 - 2bee0000
>  low ram: 0 - 2bee0000
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  Normal   0x00001000 -> 0x0002bee0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000001 -> 0x00000099
>    0: 0x00000100 -> 0x0002bee0
>On node 0 totalpages: 179832
>free_area_init_node: node 0, pgdat c14eb300, node_mem_map c15cd160
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3960 pages, LIFO batch:0
>  Normal zone: 1374 pages used for memmap
>  Normal zone: 174466 pages, LIFO batch:31
>Using APIC driver default
>SB4X0 revision 0x11
>Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x8008
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>APIC: disable apic facility
>APIC: switched to apic NOOP
>nr_irqs_gsi: 16
>Allocating PCI resources starting at 2c000000 (gap: 2c000000:b4000000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @c1c00000 s28928 r0 d24320 u4194304
>early_res array is doubled to 64 at [3000 - 37ff]
>pcpu-alloc: s28928 r0 d24320 u4194304 alloc=1*4194304
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 178426
>Kernel command line: root=/dev/hda7 pci=noacpi
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Subtract (35 early reservations)
>  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
>  #2 [0001000000 - 00015c60ec]   TEXT DATA BSS
>  #3 [0000099000 - 0000100000]   BIOS reserved
>  #4 [00015c7000 - 00015cd128]             BRK
>  #5 [0000002000 - 0000003000]      TRAMPOLINE
>  #6 [0000007000 - 0000008000]         PGTABLE
>  #7 [00015cd140 - 0001b4d140]         BOOTMEM
>  #8 [00015c6100 - 00015c6104]         BOOTMEM
>  #9 [00015c6140 - 00015c6200]         BOOTMEM
>  #10 [00015c6200 - 00015c6244]         BOOTMEM
>  #11 [0001b4d140 - 0001b50140]         BOOTMEM
>  #12 [00015c6280 - 00015c63b4]         BOOTMEM
>  #13 [00015c63c0 - 00015c6400]         BOOTMEM
>  #14 [00015c6400 - 00015c6440]         BOOTMEM
>  #15 [00015c6440 - 00015c6480]         BOOTMEM
>  #16 [00015c6480 - 00015c64c0]         BOOTMEM
>  #17 [00015c64c0 - 00015c6500]         BOOTMEM
>  #18 [00015c6500 - 00015c6540]         BOOTMEM
>  #19 [00015c6540 - 00015c6580]         BOOTMEM
>  #20 [00015c6580 - 00015c65c0]         BOOTMEM
>  #21 [00015c65c0 - 00015c6600]         BOOTMEM
>  #22 [00015c6600 - 00015c6640]         BOOTMEM
>  #23 [00015c6640 - 00015c665a]         BOOTMEM
>  #24 [00015c6680 - 00015c669a]         BOOTMEM
>  #25 [0001c00000 - 0001c0d000]         BOOTMEM
>  #26 [00015c66c0 - 00015c66c4]         BOOTMEM
>  #27 [00015c6700 - 00015c6704]         BOOTMEM
>  #28 [00015c6740 - 00015c6744]         BOOTMEM
>  #29 [00015c6780 - 00015c6784]         BOOTMEM
>  #30 [00015c67c0 - 00015c6870]         BOOTMEM
>  #31 [00015c6880 - 00015c6928]         BOOTMEM
>  #32 [0001b50140 - 0001b54140]         BOOTMEM
>  #33 [0001b54140 - 0001bd4140]         BOOTMEM
>  #34 [0001c0d000 - 0001c4d000]         BOOTMEM
>Memory: 706892k/719744k available (3503k kernel code, 12436k reserved, 1547k data, 372k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff8f000 - 0xfffff000   ( 448 kB)
>    vmalloc : 0xec6e0000 - 0xfff8d000   ( 312 MB)
>    lowmem  : 0xc0000000 - 0xebee0000   ( 702 MB)
>      .init : 0xc14ef000 - 0xc154c000   ( 372 kB)
>      .data : 0xc136bd14 - 0xc14eebbc   (1547 kB)
>      .text : 0xc1000000 - 0xc136bd14   (3503 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:320
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1495.580 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2991.16 BogoMIPS (lpj=1495580)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>mce: CPU supports 5 MCE banks
>Performance Events: 
>no APIC, boot with the "lapic" boot parameter to force-enable it.
>no hardware sampling interrupt available.
>p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20100702
>ACPI: setting ELCR to 0a00 (from 0800)
>weird, boot CPU (#0) not listed by the BIOS.
>SMP motherboard not detected.
>Apic disabled
>Local APIC not detected. Using dummy APIC emulation.
>SMP disabled
>Brought up 1 CPUs
>Total of 1 processors activated (2991.16 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [PUBS] (on)
>ACPI: No dock devices found.
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>pci_bus 0000:00: scanning bus
>pci 0000:00:00.0: found [1002:5a31] class 000600 header type 00
>pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:01.0: found [1002:5a3f] class 000604 header type 01
>pci 0000:00:01.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:04.0: found [1002:5a36] class 000604 header type 01
>pci 0000:00:04.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:04.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:06.0: found [1002:5a38] class 000604 header type 01
>pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:06.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:13.0: found [1002:4374] class 000c03 header type 00
>pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:13.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:13.0: reg 10: [mem 0xb0000000-0xb0000fff]
>pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:13.1: found [1002:4375] class 000c03 header type 00
>pci 0000:00:13.1: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:13.1: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:13.1: reg 10: [mem 0xb0001000-0xb0001fff]
>pci 0000:00:13.1: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:13.2: found [1002:4373] class 000c03 header type 00
>pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:13.2: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:13.2: reg 10: [mem 0xb0002000-0xb0002fff]
>pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: found [1002:4372] class 000c05 header type 00
>pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:14.0: reg 10: [io  0x8040-0x804f]
>pci 0000:00:14.0: reg 14: [mem 0xb0003000-0xb00033ff]
>pci 0000:00:14.0: calling ati_force_enable_hpet+0x0/0x1be
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:14.1: found [1002:4376] class 000101 header type 00
>pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:14.1: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]
>pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:14.1: reg 20: [io  0x8410-0x841f]
>pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:14.3: found [1002:4377] class 000601 header type 00
>pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:14.3: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:14.4: found [1002:4371] class 000604 header type 01
>pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:14.4: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:14.5: found [1002:4370] class 000401 header type 00
>pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:14.5: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:14.5: reg 10: [mem 0xb0003400-0xb00034ff]
>pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x141
>pci 0000:00:14.6: found [1002:4378] class 000703 header type 00
>pci 0000:00:14.6: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:00:14.6: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:00:14.6: reg 10: [mem 0xb0003800-0xb00038ff]
>pci 0000:00:14.6: calling quirk_resource_alignment+0x0/0x141
>pci_bus 0000:00: fixups for bus
>pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
>pci_bus 0000:01: scanning bus
>pci 0000:01:05.0: found [1002:5a62] class 000300 header type 00
>pci 0000:01:05.0: calling quirk_no_ata_d3+0x0/0x23
>pci 0000:01:05.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
>pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
>pci 0000:01:05.0: reg 18: [mem 0xb0100000-0xb010ffff]
>pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:05.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:01:05.0: supports D1 D2
>pci_bus 0000:01: fixups for bus
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xb0100000-0xb01fffff]
>pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff pref]
>pci_bus 0000:01: bus scan returning with max=01
>pci 0000:00:04.0: scanning [bus 02-02] behind bridge, pass 0
>pci_bus 0000:02: scanning bus
>pci 0000:02:00.0: found [14e4:167e] class 000200 header type 00
>pci 0000:02:00.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:02:00.0: reg 10: [mem 0xb0200000-0xb020ffff 64bit]
>pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci_bus 0000:02: fixups for bus
>pci 0000:00:04.0: PCI bridge to [bus 02-02]
>pci 0000:00:04.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:04.0:   bridge window [mem 0xb0200000-0xb02fffff]
>pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci_bus 0000:02: bus scan returning with max=02
>pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 0
>pci_bus 0000:03: scanning bus
>pci_bus 0000:03: fixups for bus
>pci 0000:00:06.0: PCI bridge to [bus 03-03]
>pci 0000:00:06.0:   bridge window [io  0x0000-0x0000] (disabled)
>pci 0000:00:06.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
>pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci_bus 0000:03: bus scan returning with max=03
>pci 0000:00:14.4: scanning [bus 04-08] behind bridge, pass 0
>pci_bus 0000:04: scanning bus
>pci 0000:04:00.0: found [104c:ac56] class 000607 header type 02
>pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:04:00.0: reg 10: [mem 0xb0310000-0xb0310fff]
>pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x141
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:04:02.0: found [168c:0013] class 000200 header type 00
>pci 0000:04:02.0: calling quirk_mmio_always_on+0x0/0x17
>pci 0000:04:02.0: reg 10: [mem 0xb0300000-0xb030ffff]
>pci 0000:04:02.0: calling quirk_resource_alignment+0x0/0x141
>pci_bus 0000:04: fixups for bus
>pci 0000:00:14.4: PCI bridge to [bus 04-08] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xa000-0xdfff]
>pci 0000:00:14.4:   bridge window [mem 0xb0300000-0xbfffffff]
>pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xd7ffffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci 0000:04:00.0: scanning [bus 06-08] behind bridge, pass 0
>pci 0000:04:00.0: scanning [bus 06-08] behind bridge, pass 1
>pci_bus 0000:04: bus scan returning with max=08
>pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
>pci 0000:00:04.0: scanning [bus 02-02] behind bridge, pass 1
>pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 1
>pci 0000:00:14.4: scanning [bus 04-08] behind bridge, pass 1
>pci_bus 0000:00: bus scan returning with max=08
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>pci_bus 0000:09: scanning bus
>pci_bus 0000:09: fixups for bus
>pci_bus 0000:09: bus scan returning with max=09
>PCI: Discovered primary peer bus 09 [IRQ]
>pci 0000:00:14.3: default IRQ router [1002:4377]
>pci 0000:00:14.1: ignoring bogus IRQ 255
>pci 0000:00:14.1: PCI INT A -> PIRQ 01, mask 0ef8, excl 0000
>pci 0000:00:14.1: PCI INT A -> newirq 0
>pci 0000:00:14.1: can't route interrupt
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:13.0: BAR 0: reserving [mem 0xb0000000-0xb0000fff flags 0x40200] (d=0, p=0)
>pci 0000:00:13.1: BAR 0: reserving [mem 0xb0001000-0xb0001fff flags 0x40200] (d=0, p=0)
>pci 0000:00:13.2: BAR 0: reserving [mem 0xb0002000-0xb0002fff flags 0x40200] (d=0, p=0)
>pci 0000:00:14.0: BAR 0: reserving [io  0x8040-0x804f flags 0x40101] (d=0, p=0)
>pci 0000:00:14.0: BAR 1: reserving [mem 0xb0003000-0xb00033ff flags 0x40200] (d=0, p=0)
>pci 0000:00:14.1: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
>pci 0000:00:14.1: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
>pci 0000:00:14.1: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
>pci 0000:00:14.1: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
>pci 0000:00:14.1: BAR 4: reserving [io  0x8410-0x841f flags 0x40101] (d=0, p=0)
>pci 0000:00:14.5: BAR 0: reserving [mem 0xb0003400-0xb00034ff flags 0x40200] (d=0, p=0)
>pci 0000:00:14.6: BAR 0: reserving [mem 0xb0003800-0xb00038ff flags 0x40200] (d=0, p=0)
>pci 0000:01:05.0: BAR 0: reserving [mem 0xc8000000-0xcfffffff flags 0x42208] (d=0, p=0)
>pci 0000:01:05.0: BAR 1: reserving [io  0x9000-0x90ff flags 0x40101] (d=0, p=0)
>pci 0000:01:05.0: BAR 2: reserving [mem 0xb0100000-0xb010ffff flags 0x40200] (d=0, p=0)
>pci 0000:02:00.0: BAR 0: reserving [mem 0xb0200000-0xb020ffff flags 0x140204] (d=0, p=0)
>pci 0000:04:00.0: BAR 0: reserving [mem 0xb0310000-0xb0310fff flags 0x40200] (d=0, p=0)
>pci 0000:04:02.0: BAR 0: reserving [mem 0xb0300000-0xb030ffff flags 0x40200] (d=0, p=0)
>reserve RAM buffer: 0000000000099000 - 000000000009ffff 
>reserve RAM buffer: 000000002bee0000 - 000000002bffffff 
>cfg80211: Calling CRDA to update world regulatory domain
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>ERROR: Unable to locate IOAPIC for GSI 13
>ERROR: Unable to locate IOAPIC for GSI 8
>ERROR: Unable to locate IOAPIC for GSI 1
>ERROR: Unable to locate IOAPIC for GSI 12
>ERROR: Unable to locate IOAPIC for GSI 7
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:02: [mem 0xfff80000-0xffffffff] has been reserved
>system 00:03: [io  0x1080] has been reserved
>system 00:03: [io  0x0220-0x022f] has been reserved
>system 00:03: [io  0x03bf] has been reserved
>system 00:03: [io  0x07bf] has been reserved
>system 00:03: [io  0x040b] has been reserved
>system 00:03: [io  0x04d0-0x04d1] has been reserved
>system 00:03: [io  0x04d6] has been reserved
>system 00:03: [io  0x0530-0x0537] has been reserved
>system 00:03: [io  0x0c00-0x0c01] has been reserved
>system 00:03: [io  0x0c14] has been reserved
>system 00:03: [io  0x0c50-0x0c52] has been reserved
>system 00:03: [io  0x0c6c] has been reserved
>system 00:03: [io  0x0c6f] has been reserved
>system 00:03: [io  0x0cd4-0x0cd5] has been reserved
>system 00:03: [io  0x0cd6-0x0cd7] has been reserved
>system 00:03: [io  0x0cd8-0x0cdf] has been reserved
>system 00:03: [io  0x8000-0x805f] could not be reserved
>system 00:03: [io  0x8100-0x81ff window] has been reserved
>system 00:03: [io  0x0f40-0x0f47] has been reserved
>system 00:03: [io  0x0280-0x0293] has been reserved
>pci 0000:01:05.0: BAR 6: assigned [mem 0xb0120000-0xb013ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xb0100000-0xb01fffff]
>pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff pref]
>pci 0000:00:04.0: PCI bridge to [bus 02-02]
>pci 0000:00:04.0:   bridge window [io  disabled]
>pci 0000:00:04.0:   bridge window [mem 0xb0200000-0xb02fffff]
>pci 0000:00:04.0:   bridge window [mem pref disabled]
>pci 0000:00:06.0: PCI bridge to [bus 03-03]
>pci 0000:00:06.0:   bridge window [io  disabled]
>pci 0000:00:06.0:   bridge window [mem disabled]
>pci 0000:00:06.0:   bridge window [mem pref disabled]
>pci 0000:04:00.0: BAR 9: assigned [mem 0xd0000000-0xd3ffffff pref]
>pci 0000:04:00.0: BAR 10: assigned [mem 0xb4000000-0xb7ffffff]
>pci 0000:04:00.0: BAR 7: assigned [io  0xa000-0xa0ff]
>pci 0000:04:00.0: BAR 8: assigned [io  0xa400-0xa4ff]
>pci 0000:04:00.0: CardBus bridge to [bus 05-08]
>pci 0000:04:00.0:   bridge window [io  0xa000-0xa0ff]
>pci 0000:04:00.0:   bridge window [io  0xa400-0xa4ff]
>pci 0000:04:00.0:   bridge window [mem 0xd0000000-0xd3ffffff pref]
>pci 0000:04:00.0:   bridge window [mem 0xb4000000-0xb7ffffff]
>pci 0000:00:14.4: PCI bridge to [bus 04-08]
>pci 0000:00:14.4:   bridge window [io  0xa000-0xdfff]
>pci 0000:00:14.4:   bridge window [mem 0xb0300000-0xbfffffff]
>pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xd7ffffff pref]
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:06.0: enabling bus mastering
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:04:00.0: PCI INT A -> PIRQ 0a, mask 0ef8, excl 0000
>pci 0000:04:00.0: PCI INT A -> newirq 11
>pci 0000:04:00.0: can't route interrupt
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:01: resource 1 [mem 0xb0100000-0xb01fffff]
>pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff pref]
>pci_bus 0000:02: resource 1 [mem 0xb0200000-0xb02fffff]
>pci_bus 0000:04: resource 0 [io  0xa000-0xdfff]
>pci_bus 0000:04: resource 1 [mem 0xb0300000-0xbfffffff]
>pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:05: resource 0 [io  0xa000-0xa0ff]
>pci_bus 0000:05: resource 1 [io  0xa400-0xa4ff]
>pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd3ffffff pref]
>pci_bus 0000:05: resource 3 [mem 0xb4000000-0xb7ffffff]
>pci_bus 0000:09: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:09: resource 1 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:00.0: calling pci_fixup_video+0x0/0x90
>pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:01.0: calling pci_fixup_video+0x0/0x90
>pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:04.0: calling pci_fixup_video+0x0/0x90
>pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:06.0: calling pci_fixup_video+0x0/0x90
>pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:13.0: calling pci_fixup_video+0x0/0x90
>pci 0000:00:13.1: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:13.1: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:13.1: calling pci_fixup_video+0x0/0x90
>pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:13.2: calling pci_fixup_video+0x0/0x90
>pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:14.0: calling pci_fixup_video+0x0/0x90
>pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:14.1: calling pci_fixup_video+0x0/0x90
>pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:14.3: calling pci_fixup_video+0x0/0x90
>pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:14.4: calling pci_fixup_video+0x0/0x90
>pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:14.5: calling pci_fixup_video+0x0/0x90
>pci 0000:00:14.6: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:00:14.6: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:00:14.6: calling pci_fixup_video+0x0/0x90
>pci 0000:01:05.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:01:05.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:01:05.0: calling pci_fixup_video+0x0/0x90
>pci 0000:01:05.0: Boot video device
>pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:02:00.0: calling pci_fixup_video+0x0/0x90
>pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:04:00.0: calling pci_fixup_video+0x0/0x90
>pci 0000:04:02.0: calling quirk_cardbus_legacy+0x0/0x21
>pci 0000:04:02.0: calling quirk_usb_early_handoff+0x0/0x466
>pci 0000:04:02.0: calling pci_fixup_video+0x0/0x90
>PCI: CLS 32 bytes, default 64
>Simple Boot Flag at 0x35 set to 0x1
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>msgmni has been set to 1380
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource acpi_pm
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (78 C)
>ACPI: Battery Slot [BAT0] (battery present)
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:05.0: PCI INT A -> PIRQ 02, mask 0ef8, excl 0000
>radeon 0000:01:05.0: PCI INT A -> newirq 11
>radeon 0000:01:05.0: can't route interrupt
>[drm] initializing kernel modesetting (RS400 0x1002:0x5A62).
>[drm] register mmio base: 0xB0100000
>[drm] register mmio size: 65536
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:01:05.0: VRAM: 64M 0x2C000000 - 0x2FFFFFFF (64M used)
>radeon 0000:01:05.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=64M, BAR=128M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 353456 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 64M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: 3 quad pipes, 1 z pipes initialized.
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x0000000040000000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Panel ID String: 1024x768                
>[drm] Panel Size 1024x768
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC2
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVDS
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xC8040000
>[drm] vram apper at 0xC8000000
>[drm] size 3145728
>[drm] fb depth is 24
>[drm]    pitch is 4096
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.6.0 20080528 for 0000:01:05.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial 0000:00:14.6: PCI INT B -> PIRQ 02, mask 0ef8, excl 0000
>serial 0000:00:14.6: PCI INT B -> newirq 11
>serial 0000:00:14.6: can't route interrupt
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x00)
>pci 0000:00:14.1: PCI INT A -> PIRQ 01, mask 0ef8, excl 0000
>pci 0000:00:14.1: PCI INT A -> newirq 9
>pci 0000:00:14.1: can't route interrupt
>atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8410-0x8417
>    ide1: BM-DMA at 0x8418-0x841f
>Probing IDE interface ide0...
>hda: TOSHIBA MK4026GAX RoHS, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>hda: max request size: 128KiB
>hda: 78140160 sectors (40007 MB), CHS=65535/16/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
>ide-cd driver 5.00
>ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>cdrom: Uniform CD-ROM driver Revision: 3.20
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.2: PCI INT A -> PIRQ 04, mask 0ef8, excl 0000
>ehci_hcd 0000:00:13.2: PCI INT A -> newirq 11
>ehci_hcd 0000:00:13.2: can't route interrupt
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 11, io mem 0xb0002000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> PIRQ 04, mask 0ef8, excl 0000
>ohci_hcd 0000:00:13.0: PCI INT A -> newirq 11
>ohci_hcd 0000:00:13.0: can't route interrupt
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 11, io mem 0xb0000000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> PIRQ 04, mask 0ef8, excl 0000
>ohci_hcd 0000:00:13.1: PCI INT A -> newirq 11
>ohci_hcd 0000:00:13.1: can't route interrupt
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 11, io mem 0xb0001000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ALSA device list:
>  No soundcards found.
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Using IPI Shortcut mode
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>scsi0 : usb-storage 1-3:1.0
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4
>EXT3-fs (hda7): error: couldn't mount because of unsupported optional features (240)
>EXT4-fs (hda7): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 3:7.
>Freeing unused kernel memory: 372k freed
>scsi 0:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  0.00 PQ: 0 ANSI: 2
>udev: starting version 149
>udevd (1294): /proc/1294/oom_adj is deprecated, please use /proc/1294/oom_score_adj instead.
>ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> PIRQ 02, mask 0ef8, excl 0000
>ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> newirq 11
>ATI IXP AC97 controller 0000:00:14.5: can't route interrupt
>ath5k 0000:04:02.0: PCI INT A -> PIRQ 0c, mask 0ef8, excl 0000
>ath5k 0000:04:02.0: PCI INT A -> newirq 11
>ath5k 0000:04:02.0: can't route interrupt
>ath5k 0000:04:02.0: registered as 'phy0'
>thinkpad_acpi: ThinkPad ACPI Extras v0.24
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 78ET68WW (1.58 ), EC 78HT06WW-1.01
>thinkpad_acpi: IBM ThinkPad R51e, model 184469U
>thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
>thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
>sd 0:0:0:0: [sda] 1974271 512-byte logical blocks: (1.01 GB/963 MiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>thinkpad_acpi: detected a 8-level brightness capable ThinkPad
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi::standby
>thinkpad_acpi: brightness: will use unverified default: brightness_mode=3
>thinkpad_acpi: brightness: please report to ibm-acpi-devel@lists.sourceforge.net whether it works well or not on your ThinkPad
>thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
> sda: sda1
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
>input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
>tg3.c:v3.113 (August 2, 2010)
>tg3 0000:02:00.0: PCI INT A not found in routing table
>tg3 0000:02:00.0: enabling bus mastering
>tg3 0000:02:00.0: setting latency timer to 64
>tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751F) rev 4201] (PCI Express) MAC address 00:0a:e4:c6:ff:ee
>tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100Base-TX Ethernet) (WireSpeed[1])
>tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ath: EEPROM regdomain: 0x64
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x64
>phy0: Selected rate control algorithm 'minstrel_ht'
>ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
>ath5k phy0: RF2112B 2GHz radio found (0x46)
>ALSA sound/pci/atiixp.c:1444: atiixp: codec 1 not available for audio
>ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> PIRQ 02, mask 0ef8, excl 0000
>ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> newirq 11
>ATI IXP MC97 controller 0000:00:14.6: can't route interrupt
>ATI IXP MC97 controller 0000:00:14.6: enabling bus mastering
>ALSA sound/pci/atiixp_modem.c:1099: atiixp-modem: codec 0 not available for modem
>ALSA sound/pci/ac97/ac97_codec.c:2173: MC'97 1 converters and GPIO not ready (0xff00)
>EXT4-fs (hda7): re-mounted. Opts: (null)
>EXT4-fs (hda2): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (hda4): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (hda6): mounted filesystem with ordered data mode. Opts: (null)
>Adding 979928k swap on /dev/hda5.  Priority:-1 extents:1 across:979928k 
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
>tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 29095: 37103 | 37128 | 38747 | 38748

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.