Attachment 40251 Details for Bug 31596 – dmesg output and xorg logfile

dmesg output and xorg logfile

dmesg.out (text/plain), 51.38 KB, created by Dirk Gouders on 2010-11-13 05:39:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dirk Gouders

Created: 2010-11-13 05:39:51 UTC

Size: 51.38 KB

patch

obsolete

>- dmesg ---------------------------------------------------------------------------------------------------------------------------------------
>Linux version 2.6.36-08223-g6966945 (root@lena) (gcc version 4.4.5 (Gentoo 4.4.5 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Fri Nov 12 20:30:09 CET 2010
>Command line: root=/dev/sda2 i915.modeset=1 drm.debug=1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
> BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007327c000 (usable)
> BIOS-e820: 000000007327c000 - 0000000073282000 (reserved)
> BIOS-e820: 0000000073282000 - 00000000733e5000 (usable)
> BIOS-e820: 00000000733e5000 - 000000007340f000 (reserved)
> BIOS-e820: 000000007340f000 - 000000007346f000 (usable)
> BIOS-e820: 000000007346f000 - 0000000073470000 (reserved)
> BIOS-e820: 0000000073470000 - 00000000734f1000 (ACPI NVS)
> BIOS-e820: 00000000734f1000 - 000000007370f000 (reserved)
> BIOS-e820: 000000007370f000 - 0000000073717000 (usable)
> BIOS-e820: 0000000073717000 - 000000007371f000 (reserved)
> BIOS-e820: 000000007371f000 - 000000007377e000 (usable)
> BIOS-e820: 000000007377e000 - 000000007379f000 (ACPI NVS)
> BIOS-e820: 000000007379f000 - 00000000737e0000 (usable)
> BIOS-e820: 00000000737e0000 - 00000000737ff000 (ACPI data)
> BIOS-e820: 00000000737ff000 - 0000000073800000 (usable)
> BIOS-e820: 0000000073800000 - 000000007c000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f080a000 - 00000000f080b000 (reserved)
> BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI present.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x73800 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-D3FFF write-protect
>  D4000-DBFFF uncachable
>  DC000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 disabled
>  1 base 074000000 mask FFC000000 uncachable
>  2 base 078000000 mask FF8000000 uncachable
>  3 base 000000000 mask F80000000 write-back
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-0000000073800000
> 0000000000 - 0073800000 page 2M
>kernel direct mapping tables up to 73800000 @ 1fffd000-20000000
>ACPI: RSDP 00000000000f6b10 00024 (v02 LENOVO)
>ACPI: XSDT 00000000737f2696 0005C (v01 LENOVO CB-01    06040000  LTP 00000000)
>ACPI: FACP 00000000737e2000 000F4 (v03 INTEL  CALPELLA 06040000 PTEC 00000001)
>ACPI: DSDT 00000000737e3000 0C4F4 (v02 Intel  CALPELLA 06040000 INTL 20060912)
>ACPI: FACS 000000007379afc0 00040
>ACPI: HPET 00000000737fed86 00038 (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
>ACPI: MCFG 00000000737fedbe 0003C (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
>ACPI: SLIC 00000000737fedfa 00176 (v01 LENOVO CB-01    06040000 LNVO 00000001)
>ACPI: APIC 00000000737fef70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: BOOT 00000000737fefd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SSDT 00000000737e1000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000073800000
>Initmem setup node 0 0000000000000000-0000000073800000
>  NODE_DATA [0000000073277000 - 000000007327bfff]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880070c00000-ffff8800727fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[8] active PFN ranges
>    0: 0x00000010 -> 0x0000009c
>    0: 0x00000100 -> 0x0007327c
>    0: 0x00073282 -> 0x000733e5
>    0: 0x0007340f -> 0x0007346f
>    0: 0x0007370f -> 0x00073717
>    0: 0x0007371f -> 0x0007377e
>    0: 0x0007379f -> 0x000737e0
>    0: 0x000737ff -> 0x00073800
>On node 0 totalpages: 472180
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3918 pages, LIFO batch:0
>  DMA32 zone: 6412 pages used for memmap
>  DMA32 zone: 461788 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880073000000 s75840 r8192 d22464 u1048576
>pcpu-alloc: s75840 r8192 d22464 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 465706
>Policy zone: DMA32
>Kernel command line: root=/dev/sda2 i915.modeset=1 drm.debug=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 1849508k/1892352k available (5515k kernel code, 3632k absent, 39212k reserved, 3184k data, 648k init)
>Preemptable hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:384
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1063.807 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2127.61 BogoMIPS (lpj=4255228)
>pid_max: default: 32768 minimum: 301
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>ACPI: Core revision 20101013
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Celeron(R) CPU        U3400  @ 1.07GHz stepping 05
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (4255.57 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 000000007371ac98 00222 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00222 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: SSDT 0000000073718018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>ACPI: SSDT 0000000073719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
>ACPI: SSDT 0000000073717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 8 1f 
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
>pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
>pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
>pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
>pci 0000:00:16.0: reg 10: [mem 0xf0804000-0xf080400f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: reg 10: [mem 0xf0807000-0xf08073ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
>pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
>pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
>pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
>pci 0000:00:1f.2: reg 20: [io  0x1820-0x183f]
>pci 0000:00:1f.2: reg 24: [mem 0xf0808000-0xf08087ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xf0809000-0xf08090ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1f.6: reg 10: [mem 0xf080a000-0xf080afff 64bit]
>pci 0000:03:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
>pci 0000:03:00.0: reg 18: [io  0x2000-0x207f]
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf04fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:04:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 04-04]
>pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0: PCI bridge to [bus 0f-0f] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 1f 1f 
>ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>HEST: Table is not found!
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>wmi: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
>wmi: Mapper loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009c400 - 000000000009ffff 
>reserve RAM buffer: 000000007327c000 - 0000000073ffffff 
>reserve RAM buffer: 00000000733e5000 - 0000000073ffffff 
>reserve RAM buffer: 000000007346f000 - 0000000073ffffff 
>reserve RAM buffer: 0000000073717000 - 0000000073ffffff 
>reserve RAM buffer: 000000007377e000 - 0000000073ffffff 
>reserve RAM buffer: 00000000737e0000 - 0000000073ffffff 
>reserve RAM buffer: 0000000073800000 - 0000000073ffffff 
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Calling CRDA to update world regulatory domain
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-fe]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0x7c000000-0xfeafffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0081-0x0091]
>pnp 00:01: [io  0x0093-0x009f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [mem 0xff000000-0xffffffff]
>pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:03: [irq 0 disabled]
>pnp 00:03: [irq 8]
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0068-0x006f]
>pnp 00:05: [io  0x0500-0x050f]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x047f]
>pnp 00:05: [io  0x1180-0x11ff]
>pnp 00:05: [io  0xfe00]
>pnp 00:05: [mem 0xff800000-0xff800fff]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0060]
>pnp 00:07: [io  0x0064]
>pnp 00:07: [irq 1]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: [irq 12]
>pnp 00:08: Plug and Play ACPI device, IDs SYN0321 SYN0300 SYN0002 PNP0f13 (active)
>pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:09: [mem 0xfed10000-0xfed13fff]
>pnp 00:09: [mem 0xfed18000-0xfed18fff]
>pnp 00:09: [mem 0xfed19000-0xfed19fff]
>pnp 00:09: [mem 0xe0000000-0xefffffff]
>pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:09: [mem 0xfeaff000-0xfeafffff]
>pnp 00:09: [mem 0xfed20000-0xfed3ffff]
>pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
>pnp 00:09: [mem 0xfed40000-0xfed44fff]
>pnp 00:09: [mem 0xfed45000-0xfed8ffff]
>pnp 00:09: [mem 0xff000000-0xffffffff]
>pnp 00:09: [mem 0xfee00000-0xfeefffff]
>pnp 00:09: [mem 0xfe800000-0xfe80ffff]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [bus ff]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: [io  0x0500-0x050f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x047f] has been reserved
>system 00:05: [io  0x1180-0x11ff] has been reserved
>system 00:05: [io  0xfe00] has been reserved
>system 00:05: [mem 0xff800000-0xff800fff] has been reserved
>system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:09: [mem 0xfeaff000-0xfeafffff] has been reserved
>system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
>system 00:09: [mem 0xfe800000-0xfe80ffff] has been reserved
>pci 0000:00:1c.0: BAR 9: assigned [mem 0x7c000000-0x7c1fffff 64bit pref]
>pci 0000:00:1c.1: BAR 9: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
>pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf04fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x7c000000-0x7c1fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 04-04]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff]
>pci 0000:00:1c.1:   bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 0f-0f]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
>pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
>pci_bus 0000:03: resource 2 [mem 0x7c000000-0x7c1fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
>pci_bus 0000:04: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
>pci_bus 0000:0f: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:0f: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:0f: resource 9 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:0f: resource 10 [mem 0x7c000000-0xfeafffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Simple Boot Flag at 0x36 set to 0x1
>Intel AES-NI instructions are not detected.
>Intel PCLMULQDQ-NI instructions are not detected.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1289654997.532:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 3612
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 1d 
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 1d 
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x25
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [ADP1] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID0]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (52 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (42 C)
>ERST: Table is not found!
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory, trimming to 32768K
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>[drm:drm_init], 
>[drm:drm_get_pci_dev], 
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 0
>ACPI: Battery Slot [BAT0] (battery present)
>i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[drm:drm_agp_bind_pages], 
>[drm:drm_agp_bind_pages], 
>[drm:drm_agp_bind_pages], 
>[drm:drm_agp_bind_pages], 
>[drm:drm_agp_bind_pages], 
>[drm:drm_sysfs_connector_add], adding "LVDS-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "HDMI Type A-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "DisplayPort-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:drm_irq_install], irq=40
>[drm:drm_agp_bind_pages], 
>[drm:drm_vblank_get], enabling vblank on crtc 1, ret: -22
>[drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>Console: switching to colour frame buffer device 170x48
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>acpi device:07: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>floppy0: no floppy controllers found
>brd: module loaded
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x21 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808100 irq 41
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ata5: DUMMY
>ata6: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808380 irq 41
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0807000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>oprofile: using NMI interrupt.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>NET: Registered protocol family 17
>Bridge firewalling registered
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>lib80211_crypt: registered algorithm 'WEP'
>lib80211_crypt: registered algorithm 'CCMP'
>lib80211_crypt: registered algorithm 'TKIP'
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD3200BEVT-24A23T0, 01.01A02, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 1-1: new high speed USB device using ehci_hcd and address 2
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>ata6: SATA link down (SStatus 0 SControl 300)
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.6: new high speed USB device using ehci_hcd and address 3
>usb 2-1.5: new high speed USB device using ehci_hcd and address 3
>Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000/0xa0000
>scsi6 : usb-storage 2-1.5:1.0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda2): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 648k freed
>scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:0: Attached scsi generic sg1 type 0
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>udev[1573]: starting version 164
>atl1c 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>atl1c 0000:03:00.0: setting latency timer to 64
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: resource 0000:00:1f.3 [io  0x1840-0x185f] conflicts with ACPI region SMBI [io  0x1840-0x184f disabled]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>atl1c 0000:03:00.0: version 1.0.1.0-NAPI
>udev[1585]: renamed network interface eth0 to eth1
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC259: BIOS auto-probing.
>EXT3-fs (sda2): using internal journal
>atl1c 0000:03:00.0: irq 43 for MSI/MSI-X
>atl1c 0000:03:00.0: atl1c: eth1 NIC Link is Up<100 Mbps Full Duplex>
>eth1: no IPv6 routers present
>sshd (2373): /proc/2373/oom_adj is deprecated, please use /proc/2373/oom_score_adj instead.
>- Xorg.0.log --------------------------------------------------------------------------------------------------------------
>[   175.038] 
>X.Org X Server 1.9.2
>Release Date: 2010-10-30
>[   175.038] X Protocol Version 11, Revision 0
>[   175.038] Build Operating System: Linux 2.6.36-gentoo x86_64 Gentoo
>[   175.038] Current Operating System: Linux lena 2.6.36-08223-g6966945 #1 SMP PREEMPT Fri Nov 12 20:30:09 CET 2010 x86_64
>[   175.038] Kernel command line: root=/dev/sda2 i915.modeset=1 drm.debug=1
>[   175.038] Build Date: 07 November 2010  11:21:00PM
>[   175.038]  
>[   175.038] Current version of pixman: 0.20.0
>[   175.038] 	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>[   175.038] Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>[   175.039] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 13 14:33:02 2010
>[   175.039] (++) Using config file: "xorg.conf.new"
>[   175.039] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>[   175.039] (==) ServerLayout "X.org Configured"
>[   175.039] (**) |-->Screen "Screen0" (0)
>[   175.039] (**) |   |-->Monitor "Monitor0"
>[   175.040] (**) |   |-->Device "Card0"
>[   175.040] (**) |-->Input Device "Mouse0"
>[   175.040] (**) |-->Input Device "Keyboard0"
>[   175.040] (==) Automatically adding devices
>[   175.040] (==) Automatically enabling devices
>[   175.040] (**) FontPath set to:
>	/usr/share/fonts/misc/,
>	/usr/share/fonts/TTF/,
>	/usr/share/fonts/OTF/,
>	/usr/share/fonts/Type1/,
>	/usr/share/fonts/100dpi/,
>	/usr/share/fonts/75dpi/,
>	/usr/share/fonts/misc/,
>	/usr/share/fonts/TTF/,
>	/usr/share/fonts/OTF/,
>	/usr/share/fonts/Type1/,
>	/usr/share/fonts/100dpi/,
>	/usr/share/fonts/75dpi/
>[   175.040] (**) ModulePath set to "/usr/lib64/xorg/modules"
>[   175.040] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
>[   175.040] (WW) Disabling Mouse0
>[   175.040] (WW) Disabling Keyboard0
>[   175.040] (II) Loader magic: 0x7cc120
>[   175.040] (II) Module ABI versions:
>[   175.040] 	X.Org ANSI C Emulation: 0.4
>[   175.040] 	X.Org Video Driver: 8.0
>[   175.040] 	X.Org XInput driver : 11.0
>[   175.040] 	X.Org Server Extension : 4.0
>[   175.041] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 2, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
>[   175.041] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>[   175.041] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>[   175.041] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>[   175.041] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
>[   175.041] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>[   175.042] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
>[   175.042] (II) LoadModule: "dri2"
>[   175.042] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
>[   175.075] (II) Module dri2: vendor="X.Org Foundation"
>[   175.075] 	compiled for 1.9.2, module version = 1.2.0
>[   175.075] 	ABI class: X.Org Server Extension, version 4.0
>[   175.075] (II) Loading extension DRI2
>[   175.075] (II) LoadModule: "dri"
>[   175.075] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
>[   175.085] (II) Module dri: vendor="X.Org Foundation"
>[   175.085] 	compiled for 1.9.2, module version = 1.0.0
>[   175.085] 	ABI class: X.Org Server Extension, version 4.0
>[   175.086] (II) Loading extension XFree86-DRI
>[   175.086] (II) LoadModule: "glx"
>[   175.086] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
>[   175.088] (II) Module glx: vendor="X.Org Foundation"
>[   175.088] 	compiled for 1.9.2, module version = 1.0.0
>[   175.088] 	ABI class: X.Org Server Extension, version 4.0
>[   175.088] (==) AIGLX enabled
>[   175.088] (II) Loading extension GLX
>[   175.089] (II) LoadModule: "record"
>[   175.089] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
>[   175.096] (II) Module record: vendor="X.Org Foundation"
>[   175.096] 	compiled for 1.9.2, module version = 1.13.0
>[   175.096] 	Module class: X.Org Server Extension
>[   175.096] 	ABI class: X.Org Server Extension, version 4.0
>[   175.096] (II) Loading extension RECORD
>[   175.096] (II) LoadModule: "dbe"
>[   175.097] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
>[   175.106] (II) Module dbe: vendor="X.Org Foundation"
>[   175.106] 	compiled for 1.9.2, module version = 1.0.0
>[   175.106] 	Module class: X.Org Server Extension
>[   175.106] 	ABI class: X.Org Server Extension, version 4.0
>[   175.106] (II) Loading extension DOUBLE-BUFFER
>[   175.106] (II) LoadModule: "extmod"
>[   175.106] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
>[   175.109] (II) Module extmod: vendor="X.Org Foundation"
>[   175.109] 	compiled for 1.9.2, module version = 1.0.0
>[   175.109] 	Module class: X.Org Server Extension
>[   175.109] 	ABI class: X.Org Server Extension, version 4.0
>[   175.109] (II) Loading extension MIT-SCREEN-SAVER
>[   175.109] (II) Loading extension XFree86-VidModeExtension
>[   175.109] (II) Loading extension XFree86-DGA
>[   175.109] (II) Loading extension DPMS
>[   175.109] (II) Loading extension XVideo
>[   175.109] (II) Loading extension XVideo-MotionCompensation
>[   175.109] (II) Loading extension X-Resource
>[   175.109] (II) LoadModule: "intel"
>[   175.109] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
>[   175.110] (II) Module intel: vendor="X.Org Foundation"
>[   175.110] 	compiled for 1.9.2, module version = 2.13.0
>[   175.110] 	Module class: X.Org Video Driver
>[   175.110] 	ABI class: X.Org Video Driver, version 8.0
>[   175.110] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
>	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
>	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
>	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
>	Sandybridge, Sandybridge
>[   175.110] (--) using VT number 7
>
>[   175.120] drmOpenDevice: node name is /dev/dri/card0
>[   175.120] drmOpenDevice: open result is 10, (OK)
>[   175.144] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>[   175.144] drmOpenDevice: node name is /dev/dri/card0
>[   175.144] drmOpenDevice: open result is 10, (OK)
>[   175.144] drmOpenByBusid: drmOpenMinor returns 10
>[   175.144] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>[   175.144] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>[   175.144] (==) intel(0): RGB weight 888
>[   175.144] (==) intel(0): Default visual is TrueColor
>[   175.144] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
>[   175.144] (--) intel(0): Chipset: "Arrandale"
>[   175.144] (**) intel(0): Tiling enabled
>[   175.144] (**) intel(0): SwapBuffers wait enabled
>[   175.144] (==) intel(0): video overlay key set to 0x101fe
>[   175.159] (II) intel(0): Output LVDS1 using monitor section Monitor0
>[   175.164] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
>[   175.196] (II) intel(0): Output VGA1 has no monitor section
>[   175.200] (II) intel(0): Output HDMI1 has no monitor section
>[   175.201] (II) intel(0): Output DP1 has no monitor section
>[   175.208] (II) intel(0): EDID for output LVDS1
>[   175.208] (II) intel(0): Manufacturer: AUO  Model: 305c  Serial#: 0
>[   175.208] (II) intel(0): Year: 2009  Week: 0
>[   175.208] (II) intel(0): EDID Version: 1.3
>[   175.208] (II) intel(0): Digital Display Input
>[   175.208] (II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 14
>[   175.208] (II) intel(0): Gamma: 2.20
>[   175.208] (II) intel(0): No DPMS capabilities specified
>[   175.208] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
>[   175.209] (II) intel(0): First detailed timing is preferred mode
>[   175.209] (II) intel(0): redX: 0.584 redY: 0.333   greenX: 0.338 greenY: 0.571
>[   175.209] (II) intel(0): blueX: 0.158 blueY: 0.133   whiteX: 0.313 whiteY: 0.329
>[   175.209] (II) intel(0): Manufacturer's mask: 0
>[   175.209] (II) intel(0): Supported detailed timing:
>[   175.209] (II) intel(0): clock: 69.3 MHz   Image Size:  256 x 144 mm
>[   175.209] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1456 h_border: 0
>[   175.209] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 793 v_border: 0
>[   175.209] (II) intel(0): Unknown vendor-specific block f
>[   175.209] (II) intel(0):  AUO
>[   175.209] (II) intel(0):  B116XW03 V0
>[   175.209] (II) intel(0): EDID (in hex):
>[   175.209] (II) intel(0): 	00ffffffffffff0006af5c3000000000
>[   175.209] (II) intel(0): 	00130103801a0e780a99859555569228
>[   175.209] (II) intel(0): 	22505400000001010101010101010101
>[   175.209] (II) intel(0): 	010101010101121b565a500019303020
>[   175.209] (II) intel(0): 	36000090100000180000000f00000000
>[   175.209] (II) intel(0): 	00000000000000000020000000fe0041
>[   175.209] (II) intel(0): 	554f0a202020202020202020000000fe
>[   175.209] (II) intel(0): 	004231313658573033205630200a00ec
>[   175.209] (II) intel(0): EDID vendor "AUO", prod id 12380
>[   175.209] (II) intel(0): Printing DDC gathered Modelines:
>[   175.209] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1414 1446 1456  768 771 777 793 -hsync -vsync (47.6 kHz)
>[   175.210] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
>[   175.210] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
>[   175.210] (II) intel(0): Printing probed modes for output LVDS1
>[   175.210] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1414 1446 1456  768 771 777 793 -hsync -vsync (47.6 kHz)
>[   175.210] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>[   175.210] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>[   175.210] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>[   175.210] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>[   175.240] (II) intel(0): EDID for output VGA1
>[   175.244] (II) intel(0): EDID for output HDMI1
>[   175.246] (II) intel(0): EDID for output DP1
>[   175.246] (II) intel(0): Output LVDS1 connected
>[   175.246] (II) intel(0): Output VGA1 disconnected
>[   175.246] (II) intel(0): Output HDMI1 disconnected
>[   175.246] (II) intel(0): Output DP1 disconnected
>[   175.246] (II) intel(0): Using exact sizes for initial modes
>[   175.246] (II) intel(0): Output LVDS1 using initial mode 1366x768
>[   175.246] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
>[   175.246] (II) intel(0): Kernel page flipping support detected, enabling
>[   175.246] (**) intel(0): Display dimensions: (260, 140) mm
>[   175.246] (**) intel(0): DPI set to (133, 139)
>[   175.246] (II) Loading sub module "fb"
>[   175.246] (II) LoadModule: "fb"
>[   175.246] (II) Loading /usr/lib64/xorg/modules/libfb.so
>[   175.257] (II) Module fb: vendor="X.Org Foundation"
>[   175.257] 	compiled for 1.9.2, module version = 1.0.0
>[   175.258] 	ABI class: X.Org ANSI C Emulation, version 0.4
>[   175.258] (==) Depth 24 pixmap format is 32 bpp
>[   175.258] (==) intel(0): VideoRam: 262144 KB
>[   175.258] (II) intel(0): [DRI2] Setup complete
>[   175.258] (II) intel(0): [DRI2]   DRI driver: i965
>[   175.258] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
>[   175.310] (II) UXA(0): Driver registered support for the following operations:
>[   175.310] (II)         solid
>[   175.310] (II)         copy
>[   175.310] (II)         composite (RENDER acceleration)
>[   175.310] (II)         put_image
>[   175.310] (II)         get_image
>[   175.311] (==) intel(0): Backing store disabled
>[   175.311] (==) intel(0): Silken mouse enabled
>[   175.311] (II) intel(0): Initializing HW Cursor
>[   175.339] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>[   175.352] (==) intel(0): DPMS enabled
>[   175.352] (==) intel(0): Intel XvMC decoder enabled
>[   175.352] (II) intel(0): Set up textured video
>[   175.352] (II) intel(0): [XvMC] xvmc_vld driver initialized.
>[   175.352] (II) intel(0): direct rendering: DRI2 Enabled
>[   175.352] (--) RandR disabled
>[   175.352] (II) Initializing built-in extension Generic Event Extension
>[   175.352] (II) Initializing built-in extension SHAPE
>[   175.352] (II) Initializing built-in extension MIT-SHM
>[   175.352] (II) Initializing built-in extension XInputExtension
>[   175.352] (II) Initializing built-in extension XTEST
>[   175.352] (II) Initializing built-in extension BIG-REQUESTS
>[   175.352] (II) Initializing built-in extension SYNC
>[   175.352] (II) Initializing built-in extension XKEYBOARD
>[   175.352] (II) Initializing built-in extension XC-MISC
>[   175.352] (II) Initializing built-in extension XINERAMA
>[   175.352] (II) Initializing built-in extension XFIXES
>[   175.352] (II) Initializing built-in extension RENDER
>[   175.352] (II) Initializing built-in extension RANDR
>[   175.352] (II) Initializing built-in extension COMPOSITE
>[   175.352] (II) Initializing built-in extension DAMAGE
>[   175.476] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>[   175.476] (II) AIGLX: enabled GLX_INTEL_swap_event
>[   175.476] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>[   175.476] (II) AIGLX: enabled GLX_SGI_make_current_read
>[   175.476] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>[   175.476] (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
>[   175.476] (II) GLX: Initialized DRI2 GL provider for screen 0
>[   175.477] (II) intel(0): Setting screen physical size to 361 x 203
>[   176.219] (II) config/udev: Adding input device Power Button (/dev/input/event2)
>[   176.219] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[   176.219] (II) LoadModule: "evdev"
>[   176.219] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[   176.230] (II) Module evdev: vendor="X.Org Foundation"
>[   176.230] 	compiled for 1.9.2, module version = 2.5.0
>[   176.230] 	Module class: X.Org XInput Driver
>[   176.230] 	ABI class: X.Org XInput driver, version 11.0
>[   176.230] (**) Power Button: always reports core events
>[   176.230] (**) Power Button: Device: "/dev/input/event2"
>[   176.252] (--) Power Button: Found keys
>[   176.252] (II) Power Button: Configuring as keyboard
>[   176.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
>[   176.252] (**) Option "xkb_rules" "evdev"
>[   176.252] (**) Option "xkb_model" "evdev"
>[   176.252] (**) Option "xkb_layout" "us"
>[   176.296] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
>[   176.296] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>[   176.296] (**) Video Bus: always reports core events
>[   176.296] (**) Video Bus: Device: "/dev/input/event3"
>[   176.308] (--) Video Bus: Found keys
>[   176.308] (II) Video Bus: Configuring as keyboard
>[   176.308] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>[   176.308] (**) Option "xkb_rules" "evdev"
>[   176.308] (**) Option "xkb_model" "evdev"
>[   176.308] (**) Option "xkb_layout" "us"
>[   176.340] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
>[   176.340] (II) No input driver/identifier specified (ignoring)
>[   176.340] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
>[   176.340] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
>[   176.340] (**) Sleep Button: always reports core events
>[   176.340] (**) Sleep Button: Device: "/dev/input/event1"
>[   176.364] (--) Sleep Button: Found keys
>[   176.364] (II) Sleep Button: Configuring as keyboard
>[   176.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
>[   176.364] (**) Option "xkb_rules" "evdev"
>[   176.364] (**) Option "xkb_model" "evdev"
>[   176.364] (**) Option "xkb_layout" "us"
>[   176.378] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
>[   176.378] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
>[   176.379] (**) AT Translated Set 2 keyboard: always reports core events
>[   176.379] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
>[   176.404] (--) AT Translated Set 2 keyboard: Found keys
>[   176.404] (II) AT Translated Set 2 keyboard: Configuring as keyboard
>[   176.404] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>[   176.404] (**) Option "xkb_rules" "evdev"
>[   176.404] (**) Option "xkb_model" "evdev"
>[   176.404] (**) Option "xkb_layout" "us"
>[   176.405] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
>[   176.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
>[   176.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
>[   176.405] (II) LoadModule: "synaptics"
>[   176.405] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
>[   176.406] (II) Module synaptics: vendor="X.Org Foundation"
>[   176.406] 	compiled for 1.9.2, module version = 1.3.0
>[   176.406] 	Module class: X.Org XInput Driver
>[   176.406] 	ABI class: X.Org XInput driver, version 11.0
>[   176.407] (II) Synaptics touchpad driver version 1.3.0
>[   176.407] (**) Option "Device" "/dev/input/event5"
>[   176.556] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5626
>[   176.556] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4934
>[   176.556] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
>[   176.556] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
>[   176.556] (--) SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
>[   176.684] (--) SynPS/2 Synaptics TouchPad: touchpad found
>[   176.684] (**) SynPS/2 Synaptics TouchPad: always reports core events
>[   176.748] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
>[   176.748] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
>[   176.748] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
>[   176.748] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
>[   176.748] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
>[   176.748] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
>[   176.748] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
>[   176.748] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
>[   176.844] (--) SynPS/2 Synaptics TouchPad: touchpad found
>[   176.844] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
>[   176.844] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
>[   176.844] (II) Synaptics touchpad driver version 1.3.0
>[   177.900] (EE) SynPS/2 Synaptics TouchPad no synaptics event device found
>[   177.900] (**) Option "Device" "/dev/input/mouse0"
>[   177.932] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range.  defaulting to 1615 - 5685
>[   177.932] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range.  defaulting to 1729 - 4171
>[   177.932] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.  defaulting to 0 - 256
>[   177.932] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 16
>[   177.952] (EE) Query no Synaptics: 6003C8
>[   177.952] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
>[   177.952] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
>[   178.004] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
>[   178.004] (II) UnloadModule: "synaptics"
>[   182.488] (II) Power Button: Close
>[   182.488] (II) UnloadModule: "evdev"
>[   182.552] (II) Video Bus: Close
>[   182.552] (II) UnloadModule: "evdev"
>[   182.616] (II) Sleep Button: Close
>[   182.616] (II) UnloadModule: "evdev"
>[   182.696] (II) AT Translated Set 2 keyboard: Close
>[   182.696] (II) UnloadModule: "evdev"
>[   182.824] (II) UnloadModule: "synaptics"
>[   182.884] (WW) xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call

Actions: View

Attachments on bug 31596: 40251 | 40322 | 40323 | 40324 | 40325 | 40326 | 40730 | 40798 | 40810 | 41064 | 41123

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.