Attachment 40425 Details for Bug 31780 – Boot log with drm.debug=1

Boot log with drm.debug=1

dmesg.txt (text/plain), 32.65 KB, created by Kevin Winchester on 2010-11-19 15:49:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kevin Winchester

Created: 2010-11-19 15:49:27 UTC

Size: 32.65 KB

patch

obsolete

>Linux version 2.6.37-rc2-01124-gc649bf1 (kevin@alekhine) (gcc version 4.5.1 (GCC) ) #125 SMP Thu Nov 18 22:30:26 AST 2010
>Command line: root=/dev/sda3 ro drm.debug=1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.3 present.
>DMI: 939Dual-SATA2/939Dual-SATA2, BIOS P1.50 12/06/2005
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>AGP bridge at 00:04:00
>Aperture from AGP @ d0000000 old size 32 MB
>Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
>Aperture from AGP @ d0000000 size 32 MB (APSIZE 0)
>last_pfn = 0x180000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF00000000 write-back
>  1 base 0100000000 mask FF80000000 write-back
>  2 base 0040000000 mask FFC0000000 uncachable
>  3 base 0080000000 mask FF80000000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 4GB, type WB
>reg 1, base: 4GB, range: 2GB, type WB
>reg 2, base: 1GB, range: 1GB, type UC
>reg 3, base: 2GB, range: 2GB, type UC
>total RAM covered: 3072M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 64K 	num_reg: 2  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 4GB, range: 2GB, type WB
>e820 update range: 0000000040000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
>found SMP MP-table at [ffff8800000ff780] ff780
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-000000003ffb0000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ffb0000 page 4k
>kernel direct mapping tables up to 3ffb0000 @ 1fffd000-20000000
>init_memory_mapping: 0000000100000000-0000000180000000
> 0100000000 - 0180000000 page 2M
>kernel direct mapping tables up to 180000000 @ 3ffa9000-3ffb0000
>ACPI: RSDP 00000000000f9bb0 00014 (v00 ACPIAM)
>ACPI: RSDT 000000003ffb0000 00030 (v01 A M I  OEMRSDT  12000506 MSFT 00000097)
>ACPI: FACP 000000003ffb0200 00084 (v02 A M I  OEMFACP  12000506 MSFT 00000097)
>ACPI: DSDT 000000003ffb0400 045A7 (v01  939M2 939M2150 00000150 INTL 02002026)
>ACPI: FACS 000000003ffc0000 00040
>ACPI: APIC 000000003ffb0390 00068 (v01 A M I  OEMAPIC  12000506 MSFT 00000097)
>ACPI: OEMB 000000003ffc0040 00056 (v01 A M I  AMI_OEM  12000506 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88003c600000-ffff88003effffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00180000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ffb0
>    0: 0x00100000 -> 0x00180000
>On node 0 totalpages: 786239
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3921 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 243688 pages, LIFO batch:31
>  Normal zone: 7168 pages used for memmap
>  Normal zone: 517120 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-39
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 56
>Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 23 pages/cpu @ffff88003fc00000 s71616 r0 d22592 u1048576
>pcpu-alloc: s71616 r0 d22592 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 764729
>Kernel command line: root=/dev/sda3 ro drm.debug=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>AGP bridge at 00:04:00
>Aperture from AGP @ d0000000 old size 32 MB
>Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
>Aperture from AGP @ d0000000 size 32 MB (APSIZE 0)
>Node 0: aperture @ d0000000 size 256 MB
>Memory: 3022856k/6291456k available (3745k kernel code, 3146500k absent, 122100k reserved, 1758k data, 348k init)
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:320
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 2000.445 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.89 BogoMIPS (lpj=2000445)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>ACPI: Core revision 20101013
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (8000.31 BogoMIPS).
>devtmpfs: initialized
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>TOM: 0000000040000000 aka 1024M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [40000000, ffffffff]
>TOM2: 0000000180000000 aka 6144M
>bus: [00, ff] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x40000000-0xffffffff]
>bus: 00 index 2 [mem 0x000a0000-0x000bffff]
>bus: 00 index 3 [mem 0x180000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
>pci 0000:00:00.0: [10b9:1695] type 0 class 0x000600
>pci 0000:00:01.0: [10b9:524b] type 1 class 0x000604
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: [10b9:524c] type 1 class 0x000604
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:04.0: [10b9:1689] type 0 class 0x000600
>pci 0000:00:04.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:05.0: [10b9:5246] type 1 class 0x000604
>pci 0000:00:06.0: [10b9:5249] type 1 class 0x000604
>pci 0000:00:07.0: [10b9:1563] type 0 class 0x000601
>pci 0000:00:07.1: [10b9:7101] type 0 class 0x000680
>pci 0000:00:07.1: quirk: [io  0x0800-0x083f] claimed by ali7101 ACPI
>pci 0000:00:08.0: [10b9:5455] type 0 class 0x000401
>pci 0000:00:08.0: reg 10: [io  0xe800-0xe8ff]
>pci 0000:00:08.0: reg 14: [mem 0xfebff000-0xfebfffff]
>pci 0000:00:08.0: supports D1 D2
>pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:11.0: [10b9:5263] type 0 class 0x000200
>pci 0000:00:11.0: reg 10: [io  0xe400-0xe4ff]
>pci 0000:00:11.0: reg 14: [mem 0xfebfec00-0xfebfecff]
>pci 0000:00:11.0: PME# supported from D3hot D3cold
>pci 0000:00:11.0: PME# disabled
>pci 0000:00:12.0: [10b9:5229] type 0 class 0x000101
>pci 0000:00:12.0: reg 10: [io  0x01f0-0x01ff]
>pci 0000:00:12.0: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:12.0: reg 18: [io  0x0170-0x017f]
>pci 0000:00:12.0: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:12.0: reg 20: [io  0xff00-0xff0f]
>pci 0000:00:13.0: [10b9:5237] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xfebfd000-0xfebfdfff]
>pci 0000:00:13.1: [10b9:5237] type 0 class 0x000c03
>pci 0000:00:13.1: reg 10: [mem 0xfebfc000-0xfebfcfff]
>pci 0000:00:13.2: [10b9:5237] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xfebfb000-0xfebfbfff]
>pci 0000:00:13.3: [10b9:5239] type 0 class 0x000c03
>pci 0000:00:13.3: reg 10: [mem 0xfebfe800-0xfebfe8ff]
>pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:13.3: PME# disabled
>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
>PCI: peer root bus 00 res updated from pci conf
>pci 0000:01:00.0: [10de:0421] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
>pci 0000:01:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
>pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
>pci 0000:01:00.0: reg 24: [io  0xac00-0xac7f]
>pci 0000:01:00.0: reg 30: [mem 0xfe7e0000-0xfe7fffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:01.0:   bridge window [mem 0xf8700000-0xfe7fffff]
>pci 0000:00:01.0:   bridge window [mem 0x7ff00000-0x9fefffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 02-02]
>pci 0000:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:02.0:   bridge window [mem 0xfe800000-0xfe8fffff]
>pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:00.0: [1002:5c61] type 0 class 0x000300
>pci 0000:03:00.0: reg 10: [mem 0xa0000000-0xafffffff pref]
>pci 0000:03:00.0: reg 14: [io  0xd000-0xd0ff]
>pci 0000:03:00.0: reg 18: [mem 0xfe9f0000-0xfe9fffff]
>pci 0000:03:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:00:05.0: PCI bridge to [bus 03-03]
>pci 0000:00:05.0:   bridge window [io  0xb000-0xdfff]
>pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:05.0:   bridge window [mem 0x9ff00000-0xbfefffff pref]
>pci 0000:00:06.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:06.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:06.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:06.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
>pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:06.0:   bridge window [mem 0x180000000-0xfcffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:04.0: address space collision: [mem 0xd0000000-0xdfffffff pref] conflicts with GART [mem 0xd0000000-0xdfffffff]
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000003ffb0000 - 000000003fffffff 
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0x40000000-0xffffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [dma 4]
>pnp 00:01: [io  0x0000-0x000f]
>pnp 00:01: [io  0x0081-0x0083]
>pnp 00:01: [io  0x0087]
>pnp 00:01: [io  0x0089-0x008b]
>pnp 00:01: [io  0x008f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [io  0x0070-0x0071]
>pnp 00:02: [irq 8]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:03: [io  0x0061]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:04: [io  0x00f0-0x00ff]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x0010-0x001f]
>pnp 00:05: [io  0x0022-0x003f]
>pnp 00:05: [io  0x0044-0x005f]
>pnp 00:05: [io  0x0062-0x0063]
>pnp 00:05: [io  0x0065-0x006f]
>pnp 00:05: [io  0x0072-0x007f]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0084-0x0086]
>pnp 00:05: [io  0x0088]
>pnp 00:05: [io  0x008c-0x008e]
>pnp 00:05: [io  0x0090-0x009f]
>pnp 00:05: [io  0x00a2-0x00bf]
>pnp 00:05: [io  0x00e0-0x00ef]
>pnp 00:05: [io  0x0480-0x048f]
>pnp 00:05: [io  0x04d0-0x04d1]
>pnp 00:05: [io  0x0800-0x087f]
>pnp 00:05: [io  0x0400-0x040f]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [mem 0xfec00000-0xfec00fff]
>pnp 00:06: [mem 0xfee00000-0xfee00fff]
>pnp 00:06: [mem 0xe0000000-0xefffffff]
>pnp 00:06: [mem 0xfec10000-0xfec10fff]
>pnp 00:06: [mem 0xffb80000-0xffffffff]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:07: [io  0x0290-0x029f]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [mem 0x00000000-0x0009ffff]
>pnp 00:08: [mem 0x000c0000-0x000cffff]
>pnp 00:08: [mem 0x000e0000-0x000fffff]
>pnp 00:08: [mem 0x00100000-0x3fffffff]
>pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
>pnp 00:08: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
>pnp 00:08: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
>pnp 00:08: disabling [mem 0x00100000-0x3fffffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: [io  0x0480-0x048f] has been reserved
>system 00:05: [io  0x04d0-0x04d1] has been reserved
>system 00:05: [io  0x0800-0x087f] could not be reserved
>system 00:05: [io  0x0400-0x040f] has been reserved
>system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:06: [mem 0xfec10000-0xfec10fff] could not be reserved
>system 00:06: [mem 0xffb80000-0xffffffff] has been reserved
>system 00:07: [io  0x0290-0x029f] has been reserved
>Switching to clocksource acpi_pm
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:01.0:   bridge window [mem 0xf8700000-0xfe7fffff]
>pci 0000:00:01.0:   bridge window [mem 0x7ff00000-0x9fefffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 02-02]
>pci 0000:00:02.0:   bridge window [io  disabled]
>pci 0000:00:02.0:   bridge window [mem 0xfe800000-0xfe8fffff]
>pci 0000:00:02.0:   bridge window [mem pref disabled]
>pci 0000:00:05.0: PCI bridge to [bus 03-03]
>pci 0000:00:05.0:   bridge window [io  0xb000-0xdfff]
>pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:05.0:   bridge window [mem 0x9ff00000-0xbfefffff pref]
>pci 0000:00:06.0: PCI bridge to [bus 04-04]
>pci 0000:00:06.0:   bridge window [io  disabled]
>pci 0000:00:06.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:06.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:06.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x180000000-0xfcffffffff]
>pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:01: resource 1 [mem 0xf8700000-0xfe7fffff]
>pci_bus 0000:01: resource 2 [mem 0x7ff00000-0x9fefffff pref]
>pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
>pci_bus 0000:03: resource 0 [io  0xb000-0xdfff]
>pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
>pci_bus 0000:03: resource 2 [mem 0x9ff00000-0xbfefffff pref]
>pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:04: resource 5 [mem 0x40000000-0xffffffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0x180000000-0xfcffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:01.0: Enabling HT MSI Mapping
>pci 0000:00:02.0: Enabling HT MSI Mapping
>PCI: CLS mismatch (64 != 32), using 64 bytes
>pci 0000:01:00.0: Boot video device
>agpgart-amd64 0000:00:04.0: AGP bridge [10b9/1689]
>agpgart-amd64 0000:00:04.0: aperture size 4096 MB is not right, using settings from NB
>agpgart-amd64 0000:00:04.0: setting up ULi AGP
>agpgart-amd64 0000:00:04.0: AGP aperture is 256M @ 0xd0000000
>init_memory_mapping: 00000000d0000000-00000000e0000000
> 00d0000000 - 00e0000000 page 2M
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture
>microcode: microcode: CPU0: AMD CPU family 0xf not supported
>microcode: microcode: CPU1: AMD CPU family 0xf not supported
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>NTFS driver 2.1.29 [Flags: R/O].
>msgmni has been set to 6032
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>[drm:drm_init], 
>[drm:drm_get_pci_dev], 
>radeon 0000:03:00.0: enabling device (0000 -> 0003)
>radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 0
>[drm] initializing kernel modesetting (RV280 0x1002:0x5C61).
>[drm] register mmio base: 0xFE9F0000
>[drm] register mmio size: 65536
>[drm:radeon_get_bios], COMBIOS detected
>[drm] GPU not posted. posting now...
>agpgart-amd64 0000:00:04.0: AGP 3.0 bridge
>agpgart-amd64 0000:00:04.0: putting AGP V3 device into 8x mode
>radeon 0000:03:00.0: putting AGP V3 device into 8x mode
>radeon 0000:03:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:03:00.0: VRAM: 256M 0xA0000000 - 0xAFFFFFFF (128M used)
>[drm:drm_irq_install], irq=16
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 64bits DDR
>[TTM] Zone  kernel: Available graphics memory: 1544404 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 128M of VRAM memory ready
>[drm] radeon: 128M of GTT memory ready.
>radeon 0000:03:00.0: WB disabled
>[drm] Loading R200 Microcode
>[drm] radeon: ring at 0x00000000D0001000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "DVI-I-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>[drm:drm_vblank_get], enabling vblank on crtc 0, ret: 0
>[drm:drm_update_vblank_count], enabling vblank interrupts on crtc 0, missed 0
>[drm:drm_vblank_get], enabling vblank on crtc 1, ret: 0
>[drm:drm_update_vblank_count], enabling vblank interrupts on crtc 1, missed 0
>[drm] fb mappable at 0xA0040000
>[drm] vram apper at 0xA0000000
>[drm] size 5185536
>[drm] fb depth is 24
>[drm]    pitch is 5760
>Console: switching to colour frame buffer device 180x56
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.7.0 20080528 for 0000:03:00.0 on minor 0
>[drm:drm_init], 
>[drm:drm_get_pci_dev], 
>nouveau 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 65
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 1
>[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086100a2)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 60.86.41.00
>[drm] nouveau 0000:01:00.0: TMDS table version 2.0
>[drm] nouveau 0000:01:00.0: BIT table 'd' not found
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011310 00000028
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011312 00000030
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080
>[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
>[drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
>[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
>[drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
>[drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
>[drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBEC5
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC205
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCE46
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCF38
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD132
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD197
>[drm] nouveau 0000:01:00.0: 0xD197: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 1 available performance level(s)
>[drm] nouveau 0000:01:00.0: 0: memory 400MHz core 500MHz shader 1020MHz fanspeed 100%
>[drm] nouveau 0000:01:00.0: c: memory 399MHz core 459MHz shader 918MHz voltage 1320mV
>[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
>[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>[drm:drm_sysfs_connector_add], adding "DVI-I-2" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "VGA-2" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm:drm_sysfs_connector_add], adding "TV-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
>[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
>[drm:drm_sysfs_connector_remove], removing "TV-1" from sysfs
>[drm:drm_irq_install], irq=25
>[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40280000, bo ffff88017f09c4e0
>fb1: nouveaufb frame buffer device
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1
>loop: module loaded
>pata_ali 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>scsi0 : pata_ali
>scsi1 : pata_ali
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
>uli526x 0000:00:11.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>net eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:73:e7:39, irq 17
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:13.3: EHCI Host Controller
>ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.3: debug port 1
>ehci_hcd 0000:00:13.3: irq 23, io mem 0xfebfe800
>ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>ata1.00: ATA-7: SAMSUNG SP1203N, TL100-24, max UDMA/100
>ata1.00: 234493056 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1203N  TL10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
> sda: sda1 sda2 sda3 sda4
>usb usb1: Product: EHCI Host Controller
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb1: Manufacturer: Linux 2.6.37-rc2-01124-gc649bf1 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.3
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 20, io mem 0xfebfd000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.37-rc2-01124-gc649bf1 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 21, io mem 0xfebfc000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.37-rc2-01124-gc649bf1 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 22, io mem 0xfebfb000
>usb 1-2: New USB device found, idVendor=0d49, idProduct=7110
>usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
>usb 1-2: Product: OneTouch II
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.37-rc2-01124-gc649bf1 ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>rtc_cmos 00:02: RTC can wake from S4
>usb 1-2: Manufacturer: Maxtor
>usb 1-2: SerialNumber: B41VS02H    
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 114 bytes nvram
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>Intel ICH 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-1: New USB device found, idVendor=046d, idProduct=0b02
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: BT Mini-Receiver
>usb 3-1: Manufacturer: Logitech
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>usb 3-1.2: new full speed USB device using ohci_hcd and address 3
>usb 3-1.2: New USB device found, idVendor=046d, idProduct=c70e
>usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1.2: Product: BT Mini-Receiver
>usb 3-1.2: Manufacturer: Logitech
>usb 3-1.2: SerialNumber: 000761C7DF1C
>AC'97 1 does not respond - RESET
>AC'97 1 access is not valid [0xffffffff], removing mixer.
>Unable to initialize codec #1
>input: Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input2
>intel8x0_measure_ac97_clock: measured 50531 usecs (2440 samples)
>intel8x0: clocking to 48000
>ALSA device list:
>  #0: ALi M5455 with ALC850 at irq 18
>TCP cubic registered
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
>generic-usb 0003:046D:C70E.0001: input: USB HID v1.11 Keyboard [Logitech BT Mini-Receiver] on usb-0000:00:13.1-1.2/input0
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0xa
>rtc_cmos 00:02: setting system clock to 2010-11-19 23:42:36 UTC (1290210156)
>EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
>usb 3-1.3: new full speed USB device using ohci_hcd and address 4
>EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
>devtmpfs: mounted
>Freeing unused kernel memory: 348k freed
>usb 3-1.3: New USB device found, idVendor=046d, idProduct=c70a
>usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1.3: Product: BT Mini-Receiver
>usb 3-1.3: Manufacturer: Logitech
>usb 3-1.3: SerialNumber: 000761C7DF1C
>input: Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input3
>generic-usb 0003:046D:C70A.0002: input: USB HID v1.11 Mouse [Logitech BT Mini-Receiver] on usb-0000:00:13.1-1.3/input0
>Clocksource tsc unstable (delta = -167995534 ns)
>[drm:vblank_disable_fn], disabling vblank on crtc 0
>udev[645]: starting version 163
>EXT4-fs (sda3): re-mounted. Opts: (null)
>EXT4-fs (sda3): re-mounted. Opts: (null)
>EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>Adding 1052252k swap on /dev/sda2.  Priority:-1 extents:1 across:1052252k 
>uli526x: eth0 NIC Link is Up 100 Mbps Full duplex

Actions: View

Attachments on bug 31780: 40425 | 40426 | 40602 | 40610

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.