Attachment 41748 Details for Bug 32828 – Booting WITHOUT hdmi connected

Booting WITHOUT hdmi connected

noHDMI.txt (text/plain), 75.62 KB, created by Alex Fiestas on 2011-01-07 07:24:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alex Fiestas

Created: 2011-01-07 07:24:24 UTC

Size: 75.62 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.37-rc8-00344-ga9ac4ef-dirty (nasete@MiNiBaD) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Tue Jan 4 13:24:46 CET 2011
>Command line: root=/dev/disk/by-uuid/04898e68-7c75-42b8-ad1e-027acff0cfac ro quiet splash drm.debug=0xe
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000df66d800 (usable)
> BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: 0N6705/XPS M1330                       , BIOS A15 12/26/2008
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x120000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FE0000000 write-back
>  3 base 100000000 mask FE0000000 write-back
>  4 base 0DF800000 mask FFF800000 uncachable
>  5 base 0DF700000 mask FFFF00000 uncachable
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xdf66d max_arch_pfn = 0x400000000
>Scanning 0 areas for low memory corruption
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000df66d000
> 0000000000 - 00df600000 page 2M
> 00df600000 - 00df66d000 page 4k
>kernel direct mapping tables up to df66d000 @ 1fffa000-20000000
>init_memory_mapping: 0000000100000000-0000000120000000
> 0100000000 - 0120000000 page 2M
>kernel direct mapping tables up to 120000000 @ df667000-df66d000
>RAMDISK: 3778d000 - 37ff0000
>ACPI: RSDP 00000000000fbc00 00024 (v02 DELL  )
>ACPI: XSDT 00000000df66f200 00054 (v01 DELL    M08     27D80C1A ASL  00000061)
>ACPI: FACP 00000000df66f09c 000F4 (v04 DELL    M08     27D80C1A ASL  00000061)
>ACPI: DSDT 00000000df66f800 05733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
>ACPI: FACS 00000000df67e000 00040
>ACPI: HPET 00000000df66f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
>ACPI: APIC 00000000df66f400 00068 (v01 DELL    M08     27D80C1A ASL  00000047)
>ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL    M08     27D80C1A ASL  00000061)
>ACPI: BOOT 00000000df66efc0 00028 (v01 DELL    M08     27D80C1A ASL  00000061)
>ACPI: SSDT 00000000df66da3c 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff8800d0000000-ffff8800d39fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00120000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000df66d
>    0: 0x00100000 -> 0x00120000
>On node 0 totalpages: 1046012
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3921 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 896677 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129280 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000
>PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
>PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
>PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
>PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
>PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
>PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
>PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000
>PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
>Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 27 pages/cpu @ffff8800df400000 s81408 r8192 d20992 u1048576
>pcpu-alloc: s81408 r8192 d20992 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029878
>Kernel command line: root=/dev/disk/by-uuid/04898e68-7c75-42b8-ad1e-027acff0cfac ro quiet splash drm.debug=0xe
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 4036436k/4718592k available (3630k kernel code, 534544k absent, 147612k reserved, 1634k data, 520k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Preemptable hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:768
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 41943040 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration failed
>TSC: PIT calibration matches HPET. 1 loops
>Detected 1994.434 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.07 BogoMIPS (lpj=6648113)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20101013
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T6400  @ 2.00GHz stepping 0a
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (7980.10 BogoMIPS).
>devtmpfs: initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 00000000df67e080 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
>ACPI: SSDT 00000000df66e572 00202 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00202 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 00000000df66df08 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>ACPI: SSDT 00000000df66e774 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 00000000df66e4ed 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
>pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff]
>pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff]
>pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
>pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xf6e00000-0xf6efffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xeff8-0xefff]
>pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xf6f00000-0xf6ffffff 64bit]
>pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 20: [io  0x6f20-0x6f3f]
>pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
>pci 0000:00:1a.1: reg 20: [io  0x6f00-0x6f1f]
>pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
>pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xf6dfc000-0xf6dfffff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0x6f80-0x6f9f]
>pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0x6f60-0x6f7f]
>pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0x6f40-0x6f5f]
>pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
>pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
>pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:1f.1: reg 20: [io  0x6fa0-0x6faf]
>pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x6eb0-0x6eb7]
>pci 0000:00:1f.2: reg 14: [io  0x6eb8-0x6ebb]
>pci 0000:00:1f.2: reg 18: [io  0x6ec0-0x6ec7]
>pci 0000:00:1f.2: reg 1c: [io  0x6ec8-0x6ecb]
>pci 0000:00:1f.2: reg 20: [io  0x6ee0-0x6eff]
>pci 0000:00:1f.2: reg 24: [mem 0xf6dfb800-0xf6dfbfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xf6dfb700-0xf6dfb7ff]
>pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
>pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280
>pci 0000:0c:00.0: reg 10: [mem 0xf6cff000-0xf6cfffff]
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
>pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
>pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.3:   bridge window [mem 0xf6a00000-0xf6bfffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
>pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200
>pci 0000:09:00.0: reg 10: [mem 0xf69f0000-0xf69fffff 64bit]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 09-09]
>pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.5:   bridge window [mem 0xf6900000-0xf69fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
>pci 0000:03:01.0: reg 10: [mem 0xf68ff800-0xf68fffff]
>pci 0000:03:01.0: supports D1 D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
>pci 0000:03:01.1: reg 10: [mem 0xf68ff500-0xf68ff5ff]
>pci 0000:03:01.1: supports D1 D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
>pci 0000:03:01.2: reg 10: [mem 0xf68ff600-0xf68ff6ff]
>pci 0000:03:01.2: supports D1 D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
>pci 0000:03:01.3: reg 10: [mem 0xf68ff700-0xf68ff7ff]
>pci 0000:03:01.3: supports D1 D2
>pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.3: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xf6800000-0xf68fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x120000000-0x317ffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>HEST: Table is not found!
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f000 - 000000000009ffff 
>reserve RAM buffer: 00000000df66d800 - 00000000dfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
>pnp 00:00: [mem 0xfc000000-0xfebfffff window]
>pnp 00:00: [mem 0xfec10000-0xfecfffff window]
>pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
>pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
>pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
>pnp 00:00: [mem 0xfee10000-0xff9fffff window]
>pnp 00:00: [mem 0xffc00000-0xffdfffff window]
>pnp 00:00: [mem 0x120000000-0x317ffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [irq 12]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp 00:02: [io  0x0060]
>pnp 00:02: [io  0x0064]
>pnp 00:02: [io  0x0062]
>pnp 00:02: [io  0x0066]
>pnp 00:02: [irq 1]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: [io  0x0072-0x0077]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: [io  0x0063]
>pnp 00:04: [io  0x0065]
>pnp 00:04: [io  0x0067]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x0c80-0x0cff]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:06: [dma 4]
>pnp 00:06: [io  0x0000-0x000f]
>pnp 00:06: [io  0x0080-0x0085]
>pnp 00:06: [io  0x0087-0x008f]
>pnp 00:06: [io  0x00c0-0x00df]
>pnp 00:06: [io  0x0010-0x001f]
>pnp 00:06: [io  0x0090-0x0091]
>pnp 00:06: [io  0x0093-0x009f]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:07: [io  0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [mem 0xfed00000-0xfed003ff]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>pnp 00:09: [io  0x0900-0x097f]
>pnp 00:09: [io  0x0092]
>pnp 00:09: [io  0x00b2-0x00b3]
>pnp 00:09: [io  0x0020-0x0021]
>pnp 00:09: [io  0x00a0-0x00a1]
>pnp 00:09: [irq 0 disabled]
>pnp 00:09: [io  0x04d0-0x04d1]
>pnp 00:09: [io  0x1000-0x1005]
>pnp 00:09: [io  0x1008-0x100f]
>pnp 00:09: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:09: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:0a: [io  0xf400-0xf4fe]
>pnp 00:0a: [io  0x0086]
>pnp 00:0a: [io  0x1006-0x1007]
>pnp 00:0a: [io  0x100a-0x1059]
>pnp 00:0a: [io  0x1060-0x107f]
>pnp 00:0a: [io  0x1080-0x10bf]
>pnp 00:0a: [io  0x10c0-0x10df]
>pnp 00:0a: [io  0x1010-0x102f]
>pnp 00:0a: [io  0x0809]
>pnp 00:0a: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:0a: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:0a: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:0a: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:0b: [mem 0x00000000-0x0009efff]
>pnp 00:0b: [mem 0x0009f000-0x0009ffff]
>pnp 00:0b: [mem 0x000c0000-0x000cffff]
>pnp 00:0b: [mem 0x000e0000-0x000fffff]
>pnp 00:0b: [mem 0x00100000-0xdf66d7ff]
>pnp 00:0b: [mem 0xdf66d800-0xdf6fffff]
>pnp 00:0b: [mem 0xdf700000-0xdf7fffff]
>pnp 00:0b: [mem 0xdf700000-0xdfefffff]
>pnp 00:0b: [mem 0xffe00000-0xffffffff]
>pnp 00:0b: [mem 0xffa00000-0xffbfffff]
>pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
>pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
>pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
>pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
>pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
>pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
>pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
>pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
>pnp 00:0b: [mem 0xf8000000-0xfbffffff]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: [io  0x0c80-0x0cff] could not be reserved
>system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:09: [io  0x0900-0x097f] has been reserved
>system 00:09: [io  0x04d0-0x04d1] has been reserved
>system 00:0a: [io  0xf400-0xf4fe] has been reserved
>system 00:0a: [io  0x1080-0x10bf] has been reserved
>system 00:0a: [io  0x10c0-0x10df] has been reserved
>system 00:0a: [io  0x0809] has been reserved
>system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
>system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
>system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved
>system 00:0b: [mem 0x000e0000-0x000fffff] has been reserved
>system 00:0b: [mem 0x00100000-0xdf66d7ff] could not be reserved
>system 00:0b: [mem 0xdf66d800-0xdf6fffff] has been reserved
>system 00:0b: [mem 0xdf700000-0xdf7fffff] has been reserved
>system 00:0b: [mem 0xdf700000-0xdfefffff] could not be reserved
>system 00:0b: [mem 0xffe00000-0xffffffff] has been reserved
>system 00:0b: [mem 0xffa00000-0xffbfffff] has been reserved
>system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
>system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
>system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
>system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
>system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
>system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
>system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
>pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
>pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
>pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
>pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
>pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
>pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
>pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.3:   bridge window [mem 0xf6a00000-0xf6bfffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 09-09]
>pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.5:   bridge window [mem 0xf6900000-0xf69fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 03-03]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xf6800000-0xf68fffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
>pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
>pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
>pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
>pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
>pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
>pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
>pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
>pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff]
>pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff]
>pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
>pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
>pci_bus 0000:0c: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
>pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:0d: resource 1 [mem 0xf6a00000-0xf6bfffff]
>pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
>pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:09: resource 1 [mem 0xf6900000-0xf69fffff]
>pci_bus 0000:09: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
>pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf68fffff]
>pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff]
>pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff]
>pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
>pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
>pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
>pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
>pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
>pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff]
>pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 8588k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800dae00000 - ffff8800dee00000
>software IO TLB at phys 0xdae00000 - 0xdee00000
>Simple Boot Flag at 0x79 set to 0x1
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1294413310.499:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7900
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ERST: Table is not found!
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 520k freed
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>udev[35]: starting version 165
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>ACPI: Sleep Button [SBTN]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xdf67e800
>[drm:intel_opregion_setup], Public ACPI methods supported
>[drm:intel_opregion_setup], SWSCI supported
>[drm:i915_init_phys_hws], Enabled hardware status page
>i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:i915_setup_compression], FBC base 0xdf800000, ll base 0xdff00000, size 7M
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT CRESTLINE      d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 67660 1280 1328 1360 1386 800 803 809 813 0x8 0xa
>[drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
>[drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5, i2c_speed=3
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_setup_outputs], probing SDVOB
>[drm:intel_sdvo_debug_write], SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 04 AE 00 02 01 01 01 00
>[drm:intel_sdvo_get_capabilities], SDVO capabilities:
>  vendor_id: 4
>  device_id: 174
>  device_rev_id: 0
>  sdvo_version_major: 2
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 0
>  sharp_scaling: 0
>  up_scaling: 0
>  down_scaling: 0
>  stall_support: 0
>  output_flags: 1
>[drm:intel_sdvo_debug_write], SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 12
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_debug_write], SDVOB: W: 9E                         (SDVO_CMD_GET_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 74 40
>[drm:intel_sdvo_init], SDVOB device VID/DID: 04:AE.00, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_setup_outputs], probing SDVOC
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOC
>[drm:intel_tv_init], Integrated TV is not present.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm] initialized overlay support
>[drm:intel_panel_get_backlight], get backlight PWM = 127500
>[drm:intel_panel_set_backlight], set backlight PWM = 0
>[drm:intel_panel_get_max_backlight], max backlight PWM = 255000
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe 0
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 0
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? yes
>[drm:drm_enable_connectors], connector 11 enabled? no
>[drm:drm_enable_connectors], connector 14 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 5
>[drm:drm_target_preferred], looking for preferred mode on connector 5
>[drm:drm_target_preferred], found mode 1280x800
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4
>[drm:intelfb_create], allocated 1280x800 fb: 0x00040000, bo ffff88011902d600
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:intel_panel_get_backlight], get backlight PWM = 0
>[drm:intel_panel_set_backlight], set backlight PWM = 0
>[drm:intel_panel_get_max_backlight], max backlight PWM = 255000
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_panel_get_backlight], get backlight PWM = 0
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_crtc_mode_set], using SSC reference clock of 96 MHz
>[drm:intel_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:intel_pipe_set_base_atomic], Writing base 00040000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1280x800]
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 67660
>[drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:intel_panel_get_max_backlight], max backlight PWM = 255000
>[drm:intel_lvds_enable], applying panel-fitter: 0, 0
>[drm:intel_panel_set_backlight], set backlight PWM = 255000
>[drm:intel_panel_get_max_backlight], max backlight PWM = 255000
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>Console: switching to colour frame buffer device 160x50
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>acpi device:35: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input4
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
>ata2: port disabled. ignoring.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb900 irq 41
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfba00 irq 41
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata3.00: ATA-8: FUJITSU MHZ2160BJ FFS G2, 0085001C, max UDMA/100
>ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 0085 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda4
>sd 2:0:0:0: [sda] Attached SCSI disk
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:17] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:intel_pipe_set_base_atomic], Writing base 00440000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:17] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): mounted filesystem with writeback data mode
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>udev[602]: starting version 165
>ACPI: acpi_idle registered with cpuidle
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>iTCO_vendor_support: vendor-support=0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ACPI: AC Adapter [AC] (off-line)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (60 C)
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ACPI: Battery Slot [BAT0] (battery present)
>wmi: Mapper loaded
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
>sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: Dell WMI hotkeys as /devices/virtual/input/input6
>cfg80211: Calling CRDA to update world regulatory domain
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usb 2-6: new high speed USB device using ehci_hcd and address 2
>tg3.c:v3.115 (October 14, 2010)
>tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:09:00.0: setting latency timer to 64
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
>iwl3945: Copyright(c) 2003-2010 Intel Corporation
>iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwl3945 0000:0c:00.0: setting latency timer to 64
>tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:ae:25:e6:da
>tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
>tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
>tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>firewire_core: created device fw0: GUID 4a4fc000073e2490, S400
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
>iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:0c:00.0: irq 43 for MSI/MSI-X
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
>input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>hub 3-2:1.0: USB hub found
>hub 3-2:1.0: 3 ports detected
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:7670)
>uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
>input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input12
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v1.0.0)
>usb 3-2.1: new full speed USB device using uhci_hcd and address 3
>usb 3-2.2: new full speed USB device using uhci_hcd and address 4
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>usb 3-2.3: new full speed USB device using uhci_hcd and address 5
>input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input13
>generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input14
>generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
>EXT3-fs (sda1): using internal journal
>EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_panel_get_backlight], get backlight PWM = 127500
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:intel_crtc_mode_set], using SSC reference clock of 96 MHz
>[drm:intel_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:intel_pipe_set_base_atomic], Writing base 00040000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1280x800]
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 67660
>[drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
>[drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:intel_panel_set_backlight], set backlight PWM = 127500
>[drm:intel_panel_get_max_backlight], max backlight PWM = 255000
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
>EXT4-fs (sda4): re-mounted. Opts: commit=600
>WARNING! power/level is deprecated; use power/control instead
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:16] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:17] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[drm:intel_pipe_set_base_atomic], Writing base 0042C000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:i8xx_enable_fbc], enabled FBC, pitch 73, yoff 0, plane 1, 
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
>tg3 0000:09:00.0: irq 44 for MSI/MSI-X
>[drm:intel_crtc_cursor_set], 
>[drm:i915_driver_irq_handler], pipe a underrun
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>start_kdeinit (3426): /proc/3428/oom_adj is deprecated, please use /proc/3428/oom_score_adj instead.
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>ata3: hard resetting link
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: configured for UDMA/100
>ata3: EH complete
>sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>EXT4-fs (sda4): re-mounted. Opts: commit=600
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>[drm:i915_driver_open], 
>[drm:i915_driver_open], 
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 60 67660 1280 1328 1360 1386 800 803 809 813 0x48 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DVI-D-1] disconnected
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:drm_mode_addfb], [FB:21]
>[drm:drm_mode_addfb], [FB:17]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_addfb], [FB:21]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [1]
>[drm:output_poll_execute], [CONNECTOR:14:DVI-D-1] status updated from 2 to 2

Actions: View

Attachments on bug 32828: 41641 | 41747 | 41748 | 41749 | 41755

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.