Attachment 43642 Details for Bug 34554 – lspci -vvv output

lspci -vvv output

lspci-vvv (text/plain), 29.10 KB, created by Thibaut GIRKA on 2011-02-22 02:15:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thibaut GIRKA

Created: 2011-02-22 02:15:22 UTC

Size: 29.10 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=09 <?>
>
>00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: f9f00000-fdffffff
>	Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [88] Subsystem: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4161
>	Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [140 v1] Root Complex Link
>		Desc:	PortNumber=02 ComponentID=01 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed19000
>	Kernel driver in use: pcieport
>
>00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
>	Subsystem: ASUSTeK Computer Inc. Device 1153
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
>			Status:	NegoPending- InProgress-
>	Capabilities: [130 v1] Root Complex Link
>		Desc:	PortNumber=0f ComponentID=00 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: HDA Intel
>
>00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00001000-00001fff
>	Memory behind bridge: fe000000-fe0fffff
>	Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4169
>	Capabilities: [90] Subsystem: Intel Corporation N10/ICH 7 Family PCI Express Port 1
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=01 ComponentID=00 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c001
>	Kernel driver in use: pcieport
>
>00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: fe100000-fe1fffff
>	Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4171
>	Capabilities: [90] Subsystem: Intel Corporation N10/ICH 7 Family PCI Express Port 3
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=03 ComponentID=00 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c001
>	Kernel driver in use: pcieport
>
>00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: 40400000-405fffff
>	Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4179
>	Capabilities: [90] Subsystem: Intel Corporation N10/ICH 7 Family PCI Express Port 4
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=04 ComponentID=00 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c001
>	Kernel driver in use: pcieport
>
>00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 23
>	Region 4: I/O ports at ec00 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 19
>	Region 4: I/O ports at e880 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 20
>	Region 4: I/O ports at e800 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 22
>	Region 4: I/O ports at e480 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci_hcd
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fea00000-feafffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI Bridge
>
>00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
>	Subsystem: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at ffa0 [size=16]
>	Kernel driver in use: ata_piix
>
>01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce Go 7600] (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: ASUSTeK Computer Inc. Device 1232
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
>	Region 5: I/O ports at bc00 [size=128]
>	Expansion ROM at fbfe0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [128 v1] Power Budgeting <?>
>	Kernel driver in use: nouveau
>
>02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
>	Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 29
>	Region 0: Memory at fe0ff000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0300c  Data: 41a9
>	Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
>			ClockPM+ Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		AERCap:	First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
>	Capabilities: [140 v1] Device Serial Number 00-13-02-ff-ff-27-43-33
>	Kernel driver in use: iwl3945
>
>03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
>	Subsystem: ASUSTeK Computer Inc. A6J-Q008
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 28
>	Region 0: I/O ports at c800 [size=256]
>	Region 2: Memory at fe1ff000 (64-bit, non-prefetchable) [size=4K]
>	Expansion ROM at fe1e0000 [disabled] [size=64K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [48] Vital Product Data
>		Unknown small resource type 05, will not decode more.
>	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>		Address: 00000000fee0300c  Data: 4189
>	Capabilities: [60] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 1024 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [84] Vendor Specific Information: Len=4c <?>
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		AERCap:	First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
>	Capabilities: [12c v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [148 v1] Device Serial Number 03-00-00-00-00-00-00-00
>	Capabilities: [154 v1] Power Budgeting <?>
>	Kernel driver in use: r8169
>
>06:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 1000ns max)
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
>	Kernel driver in use: firewire_ohci
>
>06:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: sdhci-pci
>
>06:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 5
>	Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: ricoh-mmc
>
>06:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
>	Subsystem: ASUSTeK Computer Inc. Device 1287
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 5
>	Region 0: Memory at feafec00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>
>06:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
>	!!! Unknown header type 7f
>

Actions: View

Attachments on bug 34554: 43640 | 43641 | 43642 | 43734 | 43735 | 43772 | 45143 | 45144 | 45145 | 45146 | 45147 | 45148 | 45638 | 45639

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.