Attachment 44489 Details for Bug 35344 – dmesg logfile from boot

dmesg logfile from boot

dmesg_2.6.38 (text/plain), 72.53 KB, created by somethingsome2000 on 2011-03-15 17:04:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: somethingsome2000

Created: 2011-03-15 17:04:06 UTC

Size: 72.53 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.38 (root@Navi) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Tue Mar 15 03:01:03 CDT 2011
>[    0.000000] Command line: root=UUID=6cc4462b-eeac-412a-877e-49471a2a792d selinux=0
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
>[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
>[    0.000000]  BIOS-e820: 000000007fe90000 - 000000007fee3000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.5 present.
>[    0.000000] DMI: Dell Inc. Vostro 200/0CU409, BIOS 1.0.13 03/21/2008
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>[    0.000000] No AGP bridge found
>[    0.000000] last_pfn = 0x7fe90 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CBFFF write-protect
>[    0.000000]   CC000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-through
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
>[    0.000000]   2 disabled
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [ffff8800000f3f00] f3f00
>[    0.000000] initial memory mapped : 0 - 20000000
>[    0.000000] init_memory_mapping: 0000000000000000-000000007fe90000
>[    0.000000]  0000000000 - 007fe00000 page 2M
>[    0.000000]  007fe00000 - 007fe90000 page 4k
>[    0.000000] kernel direct mapping tables up to 7fe90000 @ 1fffc000-20000000
>[    0.000000] ACPI: RSDP 00000000000f97a0 00024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 000000007fee3080 0005C (v01 DELL    FX09    42302E31 AWRD 00000000)
>[    0.000000] ACPI: FACP 000000007fee7200 000F4 (v03 DELL    FX09    42302E31 AWRD 00000000)
>[    0.000000] ACPI: DSDT 000000007fee3200 03FFC (v01 DELL   AWRDACPI 00001000 MSFT 03000000)
>[    0.000000] ACPI: FACS 000000007fe90000 00040
>[    0.000000] ACPI: HPET 000000007fee73c0 00038 (v01 DELL    FX09    42302E31 AWRD 00000098)
>[    0.000000] ACPI: MCFG 000000007fee7400 0003C (v01 DELL    FX09    42302E31 AWRD 00000000)
>[    0.000000] ACPI: SLIC 000000007fee7440 00176 (v01 DELL    FX09    42302E31 AWRD 00000000)
>[    0.000000] ACPI: DMY2 000000007fee75c0 00080 (v01 DELL    FX09    42302E31 AWRD 00000000)
>[    0.000000] ACPI: APIC 000000007fee7300 00084 (v01 DELL    FX09    42302E31 AWRD 00000000)
>[    0.000000] ACPI: SSDT 000000007fee7ca0 00380 (v01  PmRef    CpuPm 00003000 INTL 20041203)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-000000007fe90000
>[    0.000000] Initmem setup node 0 0000000000000000-000000007fe90000
>[    0.000000]   NODE_DATA [000000007fe8b000 - 000000007fe8ffff]
>[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009e
>[    0.000000]     0: 0x00000100 -> 0x0007fe90
>[    0.000000] On node 0 totalpages: 523806
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 6 pages reserved
>[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7107 pages used for memmap
>[    0.000000]   DMA32 zone: 512717 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] 4 Processors exceeds NR_CPUS limit of 2
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
>[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007fc00000 s73984 r8192 d24320 u1048576
>[    0.000000] pcpu-alloc: s73984 r8192 d24320 u1048576 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516637
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: root=UUID=6cc4462b-eeac-412a-877e-49471a2a792d selinux=0
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Memory: 2053932k/2095680k available (5496k kernel code, 456k absent, 41292k reserved, 3129k data, 2788k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
>[    0.000000] NR_IRQS:4352 nr_irqs:512 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 2526.994 MHz processor.
>[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.98 BogoMIPS (lpj=2526994)
>[    0.001312] pid_max: default: 32768 minimum: 301
>[    0.001484] Security Framework initialized
>[    0.002146] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.003407] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.003986] Mount-cache hash table entries: 256
>[    0.004125] Initializing cgroup subsys ns
>[    0.004281] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>[    0.004560] Initializing cgroup subsys cpuacct
>[    0.004715] Initializing cgroup subsys freezer
>[    0.005029] CPU: Physical Processor ID: 0
>[    0.005182] CPU: Processor Core ID: 0
>[    0.005334] mce: CPU supports 6 MCE banks
>[    0.005492] CPU0: Thermal monitoring enabled (TM2)
>[    0.005647] using mwait in idle threads.
>[    0.005837] ACPI: Core revision 20110112
>[    0.008052] Setting APIC routing to flat
>[    0.009235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.019394] CPU0: Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz stepping 06
>[    0.019998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>[    0.019998] ... version:                2
>[    0.019998] ... bit width:              40
>[    0.019998] ... generic registers:      2
>[    0.019998] ... value mask:             000000ffffffffff
>[    0.019998] ... max period:             000000007fffffff
>[    0.019999] ... fixed-purpose events:   3
>[    0.020151] ... event mask:             0000000700000003
>[    0.020492] Booting Node   0, Processors  #1 Ok.
>[    0.092006] Brought up 2 CPUs
>[    0.092159] Total of 2 processors activated (10107.73 BogoMIPS).
>[    0.092785] devtmpfs: initialized
>[    0.093087] NET: Registered protocol family 16
>[    0.093252] ACPI: bus type pci registered
>[    0.094022] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.094300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.109908] PCI: Using configuration type 1 for base access
>[    0.116015] bio: create slab <bio-0> at 0
>[    0.117451] ACPI: EC: Look up EC in DSDT
>[    0.120183] ACPI: SSDT 000000007fee7680 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
>[    0.120655] ACPI: Dynamic OEM Table Load:
>[    0.120861] ACPI: SSDT           (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
>[    0.121272] ACPI: SSDT 000000007fee7b40 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
>[    0.121736] ACPI: Dynamic OEM Table Load:
>[    0.121990] ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
>[    0.122424] ACPI: Interpreter enabled
>[    0.122577] ACPI: (supports S0 S3 S4 S5)
>[    0.122848] ACPI: Using IOAPIC for interrupt routing
>[    0.127076] ACPI: No dock devices found.
>[    0.127229] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.127552] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.128016] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>[    0.128171] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>[    0.128326] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>[    0.128601] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
>[    0.128877] pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff]
>[    0.129006] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
>[    0.129039] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
>[    0.129064] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.129067] pci 0000:00:01.0: PME# disabled
>[    0.129100] pci 0000:00:19.0: [8086:10c0] type 0 class 0x000200
>[    0.129115] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
>[    0.129123] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
>[    0.129130] pci 0000:00:19.0: reg 18: [io  0xff00-0xff1f]
>[    0.129171] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.129175] pci 0000:00:19.0: PME# disabled
>[    0.129190] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
>[    0.129227] pci 0000:00:1a.0: reg 20: [io  0xfe00-0xfe1f]
>[    0.129264] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
>[    0.129301] pci 0000:00:1a.1: reg 20: [io  0xfd00-0xfd1f]
>[    0.129337] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
>[    0.129374] pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
>[    0.129414] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
>[    0.129429] pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
>[    0.129484] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.129488] pci 0000:00:1a.7: PME# disabled
>[    0.129504] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
>[    0.129516] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
>[    0.129562] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.129565] pci 0000:00:1b.0: PME# disabled
>[    0.129581] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
>[    0.129618] pci 0000:00:1d.0: reg 20: [io  0xfb00-0xfb1f]
>[    0.129654] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
>[    0.129691] pci 0000:00:1d.1: reg 20: [io  0xfa00-0xfa1f]
>[    0.129729] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
>[    0.129765] pci 0000:00:1d.2: reg 20: [io  0xf900-0xf91f]
>[    0.129806] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
>[    0.129820] pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff]
>[    0.130043] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.130047] pci 0000:00:1d.7: PME# disabled
>[    0.130061] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>[    0.130108] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
>[    0.130176] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
>[    0.130453] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>[    0.130610] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
>[    0.130886] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
>[    0.131024] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
>[    0.131037] pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
>[    0.131044] pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
>[    0.131050] pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
>[    0.131057] pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
>[    0.131064] pci 0000:00:1f.2: reg 20: [io  0xf400-0xf40f]
>[    0.131071] pci 0000:00:1f.2: reg 24: [io  0xf300-0xf30f]
>[    0.131101] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
>[    0.131114] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
>[    0.131132] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
>[    0.131158] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
>[    0.131171] pci 0000:00:1f.5: reg 10: [io  0xf100-0xf107]
>[    0.131178] pci 0000:00:1f.5: reg 14: [io  0xf000-0xf003]
>[    0.131185] pci 0000:00:1f.5: reg 18: [io  0xef00-0xef07]
>[    0.131192] pci 0000:00:1f.5: reg 1c: [io  0xee00-0xee03]
>[    0.131198] pci 0000:00:1f.5: reg 20: [io  0xed00-0xed0f]
>[    0.131205] pci 0000:00:1f.5: reg 24: [io  0xec00-0xec0f]
>[    0.131260] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
>[    0.131269] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
>[    0.131279] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.131288] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
>[    0.131295] pci 0000:01:00.0: reg 24: [io  0xcf00-0xcf7f]
>[    0.131301] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>[    0.131336] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>[    0.131490] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>[    0.131493] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
>[    0.131497] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.131548] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
>[    0.131704] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
>[    0.131708] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
>[    0.131713] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>[    0.131715] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.131717] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.131720] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.131722] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.131724] pci 0000:00:1e.0:   bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
>[    0.131733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.132028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>[    0.132102]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.140030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>[    0.140541] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.141379] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>[    0.141888] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>[    0.142412] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>[    0.142922] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>[    0.143439] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
>[    0.143952] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
>[    0.144456] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.144456] vgaarb: loaded
>[    0.145050] SCSI subsystem initialized
>[    0.145152] libata version 3.00 loaded.
>[    0.145152] usbcore: registered new interface driver usbfs
>[    0.145165] usbcore: registered new interface driver hub
>[    0.145165] usbcore: registered new device driver usb
>[    0.146012] Advanced Linux Sound Architecture Driver Version 1.0.23.
>[    0.146160] PCI: Using ACPI for IRQ routing
>[    0.148988] PCI: pci_cache_line_size set to 64 bytes
>[    0.149040] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
>[    0.149042] reserve RAM buffer: 000000007fe90000 - 000000007fffffff 
>[    0.149056] NET: Registered protocol family 8
>[    0.149165] NET: Registered protocol family 20
>[    0.149998] NetLabel: Initializing
>[    0.150146] NetLabel:  domain hash size = 128
>[    0.150298] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.150459] NetLabel:  unlabeled traffic allowed by default
>[    0.150615] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>[    0.150772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.150996] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>[    0.154001] Switching to clocksource hpet
>[    0.154667] Switched to NOHz mode on CPU #0
>[    0.154780] Switched to NOHz mode on CPU #1
>[    0.155811] pnp: PnP ACPI init
>[    0.155970] ACPI: bus type pnp registered
>[    0.156198] pnp 00:00: [bus 00-ff]
>[    0.156200] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.156202] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.156204] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.156206] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.156208] pnp 00:00: [mem 0x000c0000-0x000dffff window]
>[    0.156210] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
>[    0.156271] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.156321] pnp 00:01: [io  0x0010-0x001f]
>[    0.156322] pnp 00:01: [io  0x0022-0x003f]
>[    0.156324] pnp 00:01: [io  0x0044-0x005f]
>[    0.156326] pnp 00:01: [io  0x0060]
>[    0.156327] pnp 00:01: [io  0x0064]
>[    0.156328] pnp 00:01: [io  0x0062-0x0063]
>[    0.156330] pnp 00:01: [io  0x0065-0x006f]
>[    0.156331] pnp 00:01: [io  0x0074-0x007f]
>[    0.156333] pnp 00:01: [io  0x0091-0x0093]
>[    0.156334] pnp 00:01: [io  0x00a2-0x00bf]
>[    0.156336] pnp 00:01: [io  0x00e0-0x00ef]
>[    0.156338] pnp 00:01: [io  0x04d0-0x04d1]
>[    0.156339] pnp 00:01: [io  0x0800-0x087f]
>[    0.156341] pnp 00:01: [io  0x0290-0x0297]
>[    0.156342] pnp 00:01: [io  0x0880-0x088f]
>[    0.156411] system 00:01: [io  0x04d0-0x04d1] has been reserved
>[    0.156565] system 00:01: [io  0x0800-0x087f] has been reserved
>[    0.156719] system 00:01: [io  0x0290-0x0297] has been reserved
>[    0.156873] system 00:01: [io  0x0880-0x088f] has been reserved
>[    0.157035] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.157046] pnp 00:02: [dma 4]
>[    0.157047] pnp 00:02: [io  0x0000-0x000f]
>[    0.157049] pnp 00:02: [io  0x0080-0x0090]
>[    0.157051] pnp 00:02: [io  0x0094-0x009f]
>[    0.157052] pnp 00:02: [io  0x00c0-0x00df]
>[    0.157097] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.157139] pnp 00:03: [irq 0 disabled]
>[    0.157147] pnp 00:03: [irq 8]
>[    0.157149] pnp 00:03: [mem 0xfed00000-0xfed003ff]
>[    0.157191] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.157214] pnp 00:04: [io  0x0070-0x0073]
>[    0.157256] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.157264] pnp 00:05: [io  0x0061]
>[    0.157308] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.157316] pnp 00:06: [io  0x00f0-0x00ff]
>[    0.157320] pnp 00:06: [irq 13]
>[    0.157362] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.157491] pnp 00:07: [io  0x03f0-0x03f5]
>[    0.157492] pnp 00:07: [io  0x03f7]
>[    0.157497] pnp 00:07: [irq 6]
>[    0.157498] pnp 00:07: [dma 2]
>[    0.157554] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
>[    0.157602] pnp 00:08: [io  0x0400-0x04bf]
>[    0.157657] system 00:08: [io  0x0400-0x04bf] could not be reserved
>[    0.157812] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.157828] pnp 00:09: [mem 0xffb80000-0xffbfffff]
>[    0.157871] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.158033] pnp 00:0a: [mem 0xe0000000-0xefffffff]
>[    0.158100] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.158256] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.158314] pnp 00:0b: [mem 0x000f0000-0x000fffff]
>[    0.158316] pnp 00:0b: [mem 0x7ff00000-0x7fffffff]
>[    0.158318] pnp 00:0b: [mem 0xfed00000-0xfed000ff]
>[    0.158320] pnp 00:0b: [mem 0x7fe90000-0x7fefffff]
>[    0.158321] pnp 00:0b: [mem 0x00000000-0x0009ffff]
>[    0.158323] pnp 00:0b: [mem 0x00100000-0x7fe8ffff]
>[    0.158325] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
>[    0.158326] pnp 00:0b: [mem 0xfed14000-0xfed1dfff]
>[    0.158328] pnp 00:0b: [mem 0xfed20000-0xfed9ffff]
>[    0.158330] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>[    0.158331] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
>[    0.158333] pnp 00:0b: [mem 0xfff00000-0xffffffff]
>[    0.158335] pnp 00:0b: [mem 0x000e0000-0x000effff]
>[    0.158403] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
>[    0.158558] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved
>[    0.158713] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
>[    0.158868] system 00:0b: [mem 0x7fe90000-0x7fefffff] could not be reserved
>[    0.159032] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.159188] system 00:0b: [mem 0x00100000-0x7fe8ffff] could not be reserved
>[    0.159343] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.159498] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved
>[    0.159653] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
>[    0.159807] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.159962] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
>[    0.160124] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.160279] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
>[    0.160434] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.160441] pnp: PnP ACPI: found 12 devices
>[    0.160592] ACPI: ACPI bus type pnp unregistered
>[    0.168424] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
>[    0.168701] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>[    0.168854] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>[    0.169022] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
>[    0.169178] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.169455] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
>[    0.169608] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
>[    0.169764] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
>[    0.169920] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>[    0.170216] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.170372] pci 0000:00:01.0: setting latency timer to 64
>[    0.170378] pci 0000:00:1e.0: setting latency timer to 64
>[    0.170381] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.170383] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.170385] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.170387] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>[    0.170389] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
>[    0.170391] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>[    0.170393] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
>[    0.170395] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.170398] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.170400] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
>[    0.170402] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
>[    0.170404] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
>[    0.170406] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
>[    0.170408] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.170410] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
>[    0.170412] pci_bus 0000:02: resource 8 [mem 0x7ff00000-0xfebfffff]
>[    0.170438] NET: Registered protocol family 2
>[    0.170671] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.171316] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>[    0.173341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.173969] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.174202] TCP reno registered
>[    0.174359] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.174531] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.174853] NET: Registered protocol family 1
>[    0.175114] RPC: Registered udp transport module.
>[    0.175267] RPC: Registered tcp transport module.
>[    0.175419] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.175592] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
>[    0.175594] pci 0000:00:1a.0: Performing full reset
>[    0.175609] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.175611] pci 0000:00:1a.1: Performing full reset
>[    0.175625] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.175627] pci 0000:00:1a.2: Performing full reset
>[    0.175663] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b
>[    0.175665] pci 0000:00:1d.0: Performing full reset
>[    0.175680] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.175681] pci 0000:00:1d.1: Performing full reset
>[    0.175696] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>[    0.175697] pci 0000:00:1d.2: Performing full reset
>[    0.175738] pci 0000:01:00.0: Boot video device
>[    0.175740] PCI: CLS 64 bytes, default 64
>[    0.440069] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
>[    0.440229] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
>[    0.440422] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.440905] audit: initializing netlink socket (disabled)
>[    0.441075] type=2000 audit(1300210093.440:1): initialized
>[    0.452263] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.456368] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
>[    0.456849] Btrfs loaded
>[    0.457009] msgmni has been set to 4011
>[    0.457401] NET: Registered protocol family 38
>[    0.457632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.457908] io scheduler noop registered
>[    0.458074] io scheduler deadline registered
>[    0.458278] io scheduler cfq registered (default)
>[    0.458507] pcieport 0000:00:01.0: setting latency timer to 64
>[    0.458533] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.458799] intel_idle: MWAIT substates: 0x22220
>[    0.458800] intel_idle: does not run on family 6 model 23
>[    0.458963] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    0.459274] ACPI: Power Button [PWRB]
>[    0.459589] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.459864] ACPI: Power Button [PWRF]
>[    0.460104] ACPI: Fan [FAN] (on)
>[    0.460280] ACPI: acpi_idle registered with cpuidle
>[    0.461498] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.461652] ACPI: Thermal Zone [THRM] (40 C)
>[    0.461929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.512376] Non-volatile memory driver v1.3
>[    0.512561] [drm] Initialized drm 1.1.0 20060810
>[    0.512764] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.512921] nouveau 0000:01:00.0: setting latency timer to 64
>[    0.515618] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
>[    0.518224] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[    0.560844] [drm] nouveau 0000:01:00.0: ... appears to be valid
>[    0.560998] [drm] nouveau 0000:01:00.0: BIT BIOS found
>[    0.561159] [drm] nouveau 0000:01:00.0: Bios version 60.84.51.00
>[    0.561314] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
>[    0.561467] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
>[    0.561621] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[    0.561897] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
>[    0.562059] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030
>[    0.562213] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
>[    0.562368] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
>[    0.562522] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
>[    0.562677] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
>[    0.562832] [drm] nouveau 0000:01:00.0:   0: 0x00002030: type 0x30 idx 0 tag 0x08
>[    0.563115] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
>[    0.563391] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
>[    0.563667] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
>[    0.563942] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
>[    0.564226] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC1BE
>[    0.590116] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC50B
>[    0.609009] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCF58
>[    0.609296] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD04A
>[    0.611082] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD27D
>[    0.611358] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD2E2
>[    0.632013] [drm] nouveau 0000:01:00.0: 0xD2E2: Condition still not met after 20ms, skipping following opcodes
>[    0.650997] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
>[    0.651158] [drm] nouveau 0000:01:00.0: 0: memory 700MHz core 540MHz shader 1188MHz fanspeed 100%
>[    0.651446] [drm] nouveau 0000:01:00.0: c: memory 702MHz core 540MHz shader 1188MHz voltage 1320mV
>[    0.651788] [TTM] Zone  kernel: Available graphics memory: 1026966 kiB.
>[    0.651943] [TTM] Initializing pool allocator.
>[    0.652115] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
>[    0.663712] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>[    0.682236] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
>[    0.682390] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
>[    0.682979] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    0.683141] [drm] No driver support for vblank timestamp query.
>[    0.844311] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x60000000, bo ffff88007bec6400
>[    0.850638] Console: switching to colour frame buffer device 210x65
>[    0.954509] [drm] nouveau 0000:01:00.0: GPU lockup - switching to software fbcon
>[    0.958642] fb0: nouveaufb frame buffer device
>[    0.958663] drm: registered panic notifier
>[    0.958690] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
>[    0.960381] brd: module loaded
>[    0.961201] loop: module loaded
>[    0.961466] ata_piix 0000:00:1f.2: version 2.13
>[    0.961486] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    0.961521] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>[    0.961592] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    0.961978] scsi0 : ata_piix
>[    0.962125] scsi1 : ata_piix
>[    0.962603] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
>[    0.962639] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
>[    0.962682] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    0.962718] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>[    0.962782] ata_piix 0000:00:1f.5: setting latency timer to 64
>[    0.963084] scsi2 : ata_piix
>[    0.963189] scsi3 : ata_piix
>[    0.963453] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
>[    0.963487] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
>[    0.963587] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
>[    0.963615] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>[    0.963655] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[    0.963690] e1000e 0000:00:19.0: setting latency timer to 64
>[    0.963763] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    1.098893] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:9b:07:ff:84
>[    1.098930] e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
>[    1.098976] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
>[    1.099143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.099174] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
>[    1.099191] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.099230] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    1.099233] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    1.099269] drivers/usb/core/inode.c: creating file 'devices'
>[    1.099272] drivers/usb/core/inode.c: creating file '001'
>[    1.099317] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    1.107019] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.107025] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
>[    1.107056] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.110940] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[    1.110942] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>[    1.110954] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
>[    1.110983] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.114876] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.120010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    1.120077] usb usb1: default language 0x0409
>[    1.120082] usb usb1: udev 1, busnum 1, minor = 0
>[    1.120084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.120115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.120147] usb usb1: Product: EHCI Host Controller
>[    1.120170] usb usb1: Manufacturer: Linux 2.6.38 ehci_hcd
>[    1.120194] usb usb1: SerialNumber: 0000:00:1a.7
>[    1.120284] usb usb1: usb_probe_device
>[    1.120286] usb usb1: configuration #1 chosen from 1 choice
>[    1.120292] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    1.120333] hub 1-0:1.0: usb_probe_interface
>[    1.120335] hub 1-0:1.0: usb_probe_interface - got id
>[    1.120336] hub 1-0:1.0: USB hub found
>[    1.120358] hub 1-0:1.0: 6 ports detected
>[    1.120377] hub 1-0:1.0: standalone hub
>[    1.120378] hub 1-0:1.0: no power switching (usb 1.0)
>[    1.120380] hub 1-0:1.0: individual port over-current protection
>[    1.120382] hub 1-0:1.0: power on to power good time: 20ms
>[    1.120385] hub 1-0:1.0: local power source is good
>[    1.120387] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    1.120413] drivers/usb/core/inode.c: creating file '001'
>[    1.120450] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    1.120489] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    1.120491] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    1.120518] drivers/usb/core/inode.c: creating file '002'
>[    1.120565] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    1.127019] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.127025] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
>[    1.127054] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.130929] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    1.130931] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    1.130941] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
>[    1.132286] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.136177] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.142010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.143367] usb usb2: default language 0x0409
>[    1.143372] usb usb2: udev 1, busnum 2, minor = 128
>[    1.143374] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.144693] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.146011] usb usb2: Product: EHCI Host Controller
>[    1.147327] usb usb2: Manufacturer: Linux 2.6.38 ehci_hcd
>[    1.148631] usb usb2: SerialNumber: 0000:00:1d.7
>[    1.149974] usb usb2: usb_probe_device
>[    1.149977] usb usb2: configuration #1 chosen from 1 choice
>[    1.149981] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    1.150028] hub 2-0:1.0: usb_probe_interface
>[    1.150030] hub 2-0:1.0: usb_probe_interface - got id
>[    1.150032] hub 2-0:1.0: USB hub found
>[    1.151299] hub 2-0:1.0: 6 ports detected
>[    1.152551] hub 2-0:1.0: standalone hub
>[    1.152552] hub 2-0:1.0: no power switching (usb 1.0)
>[    1.152554] hub 2-0:1.0: individual port over-current protection
>[    1.152556] hub 2-0:1.0: power on to power good time: 20ms
>[    1.152559] hub 2-0:1.0: local power source is good
>[    1.152561] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    1.152584] drivers/usb/core/inode.c: creating file '001'
>[    1.152639] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.153974] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.155247] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    1.155249] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    1.156507] drivers/usb/core/inode.c: creating file '003'
>[    1.156557] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    1.163014] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    1.164297] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.164299] uhci_hcd 0000:00:1a.0: Performing full reset
>[    1.164311] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>[    1.164316] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
>[    1.165607] usb usb3: default language 0x0409
>[    1.165613] usb usb3: udev 1, busnum 3, minor = 256
>[    1.165615] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.166897] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.168179] usb usb3: Product: UHCI Host Controller
>[    1.169448] usb usb3: Manufacturer: Linux 2.6.38 uhci_hcd
>[    1.170699] usb usb3: SerialNumber: 0000:00:1a.0
>[    1.171998] usb usb3: usb_probe_device
>[    1.172000] usb usb3: configuration #1 chosen from 1 choice
>[    1.172011] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    1.172051] hub 3-0:1.0: usb_probe_interface
>[    1.172053] hub 3-0:1.0: usb_probe_interface - got id
>[    1.172055] hub 3-0:1.0: USB hub found
>[    1.173274] hub 3-0:1.0: 2 ports detected
>[    1.174484] hub 3-0:1.0: standalone hub
>[    1.174485] hub 3-0:1.0: no power switching (usb 1.0)
>[    1.174487] hub 3-0:1.0: individual port over-current protection
>[    1.174489] hub 3-0:1.0: power on to power good time: 2ms
>[    1.174492] hub 3-0:1.0: local power source is good
>[    1.174494] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    1.174509] drivers/usb/core/inode.c: creating file '001'
>[    1.174531] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
>[    1.174549] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[    1.175768] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    1.175770] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    1.176976] drivers/usb/core/inode.c: creating file '004'
>[    1.177031] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    1.186013] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    1.187241] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.187243] uhci_hcd 0000:00:1a.1: Performing full reset
>[    1.187255] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>[    1.187266] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
>[    1.188487] usb usb4: default language 0x0409
>[    1.188492] usb usb4: udev 1, busnum 4, minor = 384
>[    1.188494] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.189704] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.190935] usb usb4: Product: UHCI Host Controller
>[    1.192151] usb usb4: Manufacturer: Linux 2.6.38 uhci_hcd
>[    1.193370] usb usb4: SerialNumber: 0000:00:1a.1
>[    1.194649] usb usb4: usb_probe_device
>[    1.194651] usb usb4: configuration #1 chosen from 1 choice
>[    1.194656] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    1.194697] hub 4-0:1.0: usb_probe_interface
>[    1.194699] hub 4-0:1.0: usb_probe_interface - got id
>[    1.194701] hub 4-0:1.0: USB hub found
>[    1.195909] hub 4-0:1.0: 2 ports detected
>[    1.197117] hub 4-0:1.0: standalone hub
>[    1.197118] hub 4-0:1.0: no power switching (usb 1.0)
>[    1.197120] hub 4-0:1.0: individual port over-current protection
>[    1.197121] hub 4-0:1.0: power on to power good time: 2ms
>[    1.197125] hub 4-0:1.0: local power source is good
>[    1.197127] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    1.197140] drivers/usb/core/inode.c: creating file '001'
>[    1.197161] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
>[    1.197176] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[    1.198409] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    1.198411] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    1.199629] drivers/usb/core/inode.c: creating file '005'
>[    1.199679] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    1.208018] uhci_hcd 0000:00:1a.2: detected 2 ports
>[    1.209265] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.209266] uhci_hcd 0000:00:1a.2: Performing full reset
>[    1.209278] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
>[    1.209283] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
>[    1.210526] usb usb5: default language 0x0409
>[    1.210531] usb usb5: udev 1, busnum 5, minor = 512
>[    1.210533] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.211757] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.212981] usb usb5: Product: UHCI Host Controller
>[    1.214196] usb usb5: Manufacturer: Linux 2.6.38 uhci_hcd
>[    1.215409] usb usb5: SerialNumber: 0000:00:1a.2
>[    1.216682] usb usb5: usb_probe_device
>[    1.216684] usb usb5: configuration #1 chosen from 1 choice
>[    1.216689] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    1.216729] hub 5-0:1.0: usb_probe_interface
>[    1.216731] hub 5-0:1.0: usb_probe_interface - got id
>[    1.216732] hub 5-0:1.0: USB hub found
>[    1.217932] hub 5-0:1.0: 2 ports detected
>[    1.219120] hub 5-0:1.0: standalone hub
>[    1.219121] hub 5-0:1.0: no power switching (usb 1.0)
>[    1.219123] hub 5-0:1.0: individual port over-current protection
>[    1.219125] hub 5-0:1.0: power on to power good time: 2ms
>[    1.219128] hub 5-0:1.0: local power source is good
>[    1.219130] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    1.219145] drivers/usb/core/inode.c: creating file '001'
>[    1.219166] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
>[    1.219180] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    1.220399] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    1.220402] hub 1-0:1.0: port 3: status 0501 change 0001
>[    1.220409] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001403 0  ACK POWER sig=k CSC CONNECT
>[    1.220411] hub 1-0:1.0: port 4: status 0501 change 0001
>[    1.220418] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 001403 0  ACK POWER sig=k CSC CONNECT
>[    1.220421] hub 1-0:1.0: port 5: status 0501 change 0001
>[    1.220427] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    1.220430] hub 1-0:1.0: port 6: status 0501 change 0001
>[    1.220438] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    1.220440] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.221651] drivers/usb/core/inode.c: creating file '006'
>[    1.221698] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    1.232018] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    1.233248] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.233249] uhci_hcd 0000:00:1d.0: Performing full reset
>[    1.233262] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    1.233266] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
>[    1.234489] usb usb6: default language 0x0409
>[    1.234495] usb usb6: udev 1, busnum 6, minor = 640
>[    1.234497] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.235702] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.236913] usb usb6: Product: UHCI Host Controller
>[    1.238127] usb usb6: Manufacturer: Linux 2.6.38 uhci_hcd
>[    1.239343] usb usb6: SerialNumber: 0000:00:1d.0
>[    1.240622] usb usb6: usb_probe_device
>[    1.240624] usb usb6: configuration #1 chosen from 1 choice
>[    1.240629] usb usb6: adding 6-0:1.0 (config #1, interface 0)
>[    1.240671] hub 6-0:1.0: usb_probe_interface
>[    1.240673] hub 6-0:1.0: usb_probe_interface - got id
>[    1.240675] hub 6-0:1.0: USB hub found
>[    1.241877] hub 6-0:1.0: 2 ports detected
>[    1.243072] hub 6-0:1.0: standalone hub
>[    1.243073] hub 6-0:1.0: no power switching (usb 1.0)
>[    1.243074] hub 6-0:1.0: individual port over-current protection
>[    1.243076] hub 6-0:1.0: power on to power good time: 2ms
>[    1.243080] hub 6-0:1.0: local power source is good
>[    1.243081] hub 6-0:1.0: trying to enable port power on non-switchable hub
>[    1.243095] drivers/usb/core/inode.c: creating file '001'
>[    1.243118] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
>[    1.243129] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    1.244349] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    1.244352] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.245567] drivers/usb/core/inode.c: creating file '007'
>[    1.245616] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    1.252020] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    1.252025] hub 2-0:1.0: port 2: status 0501 change 0001
>[    1.256017] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    1.257244] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.257246] uhci_hcd 0000:00:1d.1: Performing full reset
>[    1.257258] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    1.257262] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
>[    1.258488] usb usb7: default language 0x0409
>[    1.258494] usb usb7: udev 1, busnum 7, minor = 768
>[    1.258496] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.259705] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.260909] usb usb7: Product: UHCI Host Controller
>[    1.262121] usb usb7: Manufacturer: Linux 2.6.38 uhci_hcd
>[    1.263334] usb usb7: SerialNumber: 0000:00:1d.1
>[    1.264616] usb usb7: usb_probe_device
>[    1.264618] usb usb7: configuration #1 chosen from 1 choice
>[    1.264622] usb usb7: adding 7-0:1.0 (config #1, interface 0)
>[    1.264663] hub 7-0:1.0: usb_probe_interface
>[    1.264664] hub 7-0:1.0: usb_probe_interface - got id
>[    1.264666] hub 7-0:1.0: USB hub found
>[    1.265877] hub 7-0:1.0: 2 ports detected
>[    1.267079] hub 7-0:1.0: standalone hub
>[    1.267080] hub 7-0:1.0: no power switching (usb 1.0)
>[    1.267082] hub 7-0:1.0: individual port over-current protection
>[    1.267084] hub 7-0:1.0: power on to power good time: 2ms
>[    1.267087] hub 7-0:1.0: local power source is good
>[    1.267088] hub 7-0:1.0: trying to enable port power on non-switchable hub
>[    1.267104] drivers/usb/core/inode.c: creating file '001'
>[    1.267128] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
>[    1.267139] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.268352] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    1.268355] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.269590] drivers/usb/core/inode.c: creating file '008'
>[    1.269633] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    1.274018] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    1.279638] ata4: SATA link down (SStatus 0 SControl 300)
>[    1.285016] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    1.286248] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    1.286250] uhci_hcd 0000:00:1d.2: Performing full reset
>[    1.286262] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    1.286266] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
>[    1.287499] usb usb8: default language 0x0409
>[    1.287505] usb usb8: udev 1, busnum 8, minor = 896
>[    1.287507] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.288720] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.289936] usb usb8: Product: UHCI Host Controller
>[    1.291148] usb usb8: Manufacturer: Linux 2.6.38 uhci_hcd
>[    1.292361] usb usb8: SerialNumber: 0000:00:1d.2
>[    1.293642] usb usb8: usb_probe_device
>[    1.293644] usb usb8: configuration #1 chosen from 1 choice
>[    1.293649] usb usb8: adding 8-0:1.0 (config #1, interface 0)
>[    1.293691] hub 8-0:1.0: usb_probe_interface
>[    1.293693] hub 8-0:1.0: usb_probe_interface - got id
>[    1.293694] hub 8-0:1.0: USB hub found
>[    1.294903] hub 8-0:1.0: 2 ports detected
>[    1.296100] hub 8-0:1.0: standalone hub
>[    1.296101] hub 8-0:1.0: no power switching (usb 1.0)
>[    1.296103] hub 8-0:1.0: individual port over-current protection
>[    1.296105] hub 8-0:1.0: power on to power good time: 2ms
>[    1.296108] hub 8-0:1.0: local power source is good
>[    1.296110] hub 8-0:1.0: trying to enable port power on non-switchable hub
>[    1.296123] drivers/usb/core/inode.c: creating file '001'
>[    1.296147] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
>[    1.296218] usbcore: registered new interface driver usblp
>[    1.297440] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
>[    1.297448] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
>[    1.297456] usbcore: registered new interface driver uas
>[    1.298643] Initializing USB Mass Storage driver...
>[    1.299888] usbcore: registered new interface driver usb-storage
>[    1.301095] USB Mass Storage support registered.
>[    1.302343] usbcore: registered new interface driver libusual
>[    1.303577] usbcore: registered new interface driver ums-sddr09
>[    1.304797] usbcore: registered new interface driver ums-sddr55
>[    1.306019] usbcore: registered new interface driver ums-usbat
>[    1.307222] usbcore: registered new interface driver usbled
>[    1.308521] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.310056] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.311241] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.312496] mousedev: PS/2 mouse device common for all mice
>[    1.313839] rtc_cmos 00:04: RTC can wake from S4
>[    1.319017] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00
>[    1.319030] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
>[    1.320015] hub 1-0:1.0: state 7 ports 6 chg 0078 evt 0000
>[    1.320022] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>[    1.320090] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.321278] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>[    1.322481] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>[    1.323730] Linux video capture interface: v2.00
>[    1.324962] usbcore: registered new interface driver uvcvideo
>[    1.326158] USB Video Class driver (v1.0.0)
>[    1.327651] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>[    1.328998] cpuidle: using governor ladder
>[    1.330219] cpuidle: using governor menu
>[    1.331526] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    1.333200] usbcore: registered new interface driver usbhid
>[    1.334423] usbhid: USB HID core driver
>[    1.335912] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[    1.337196] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[    1.337213] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    1.343026] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
>[    1.348130] hda_codec: ALC888: BIOS auto-probing.
>[    1.353779] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
>[    1.355703] usbcore: registered new interface driver snd-usb-audio
>[    1.356974] ALSA device list:
>[    1.358240]   #0: HDA Intel at 0xfdff4000 irq 42
>[    1.359520] Netfilter messages via NETLINK v0.30.
>[    1.360811] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    1.362281] ctnetlink v0.93: registering with nfnetlink.
>[    1.363924] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.365225] TCP cubic registered
>[    1.366492] NET: Registered protocol family 17
>[    1.367790] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>[    1.369083] All bugs added by David S. Miller <davem@redhat.com>
>[    1.371282] ehci_hcd 0000:00:1a.7: port 3 high speed
>[    1.371289] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    1.372678] CCID: Activated CCID 2 (TCP-like)
>[    1.374008] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
>[    1.375418] Registering the dns_resolver key type
>[    1.377363] registered taskstats version 1
>[    1.422025] usb 1-3: new high speed USB device using ehci_hcd and address 2
>[    1.431054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.435128] ata3.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, C106, max UDMA/100
>[    1.440013] Refined TSC clocksource calibration: 2526.999 MHz.
>[    1.441353] Switching to clocksource tsc
>[    1.442122] ata3.00: configured for UDMA/100
>[    1.474277] ehci_hcd 0000:00:1a.7: port 3 high speed
>[    1.474281] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    1.537537] usb 1-3: default language 0x0409
>[    1.537912] usb 1-3: udev 2, busnum 1, minor = 1
>[    1.537915] usb 1-3: New USB device found, idVendor=03f0, idProduct=5711
>[    1.539262] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.540569] usb 1-3: Product: Photosmart C4100 series
>[    1.541877] usb 1-3: Manufacturer: HP
>[    1.543178] usb 1-3: SerialNumber: MY69EG230004J7
>[    1.544555] usb 1-3: usb_probe_device
>[    1.544558] usb 1-3: configuration #1 chosen from 1 choice
>[    1.544669] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>[    1.544770] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
>[    1.544814] usblp 1-3:1.1: usb_probe_interface
>[    1.544816] usblp 1-3:1.1: usb_probe_interface - got id
>[    1.545083] usblp 1-3:1.1: looking for a minor, starting at 0
>[    1.545144] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5711
>[    1.546483] usb 1-3: adding 1-3:1.2 (config #1, interface 2)
>[    1.546550] usb 1-3: adding 1-3:1.3 (config #1, interface 3)
>[    1.546593] uas 1-3:1.3: usb_probe_interface
>[    1.546595] uas 1-3:1.3: usb_probe_interface - got id
>[    1.546602] usb-storage 1-3:1.3: usb_probe_interface
>[    1.546606] usb-storage 1-3:1.3: usb_probe_interface - got id
>[    1.546645] scsi4 : usb-storage 1-3:1.3
>[    1.548095] drivers/usb/core/inode.c: creating file '002'
>[    1.548113] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
>[    1.548119] ehci_hcd 0000:00:1a.7: port 4 low speed --> companion
>[    1.599017] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.599036] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>[    1.599042] ehci_hcd 0000:00:1a.7: port 5 low speed --> companion
>[    1.650021] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.650038] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>[    1.701276] ehci_hcd 0000:00:1a.7: port 6 high speed
>[    1.701280] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    1.724059] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.725433] ata2.01: SATA link down (SStatus 0 SControl 300)
>[    1.726789] ata2.01: link offline, clearing class 3 to NONE
>[    1.726891] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.728263] ata1.01: SATA link down (SStatus 0 SControl 300)
>[    1.732317] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
>[    1.733706] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    1.741319] ata1.00: configured for UDMA/133
>[    1.742786] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
>[    1.744325] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    1.744412] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.747284] ata2.00: ATAPI: HL-DT-ST CD-RW/DVD-ROM GCC-H30N, A101, max UDMA/100
>[    1.747316] sd 0:0:0:0: [sda] Write Protect is off
>[    1.747319] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.747334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.752009] usb 1-6: new high speed USB device using ehci_hcd and address 5
>[    1.761544]  sda: sda1 sda2 < sda5 >
>[    1.763334] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.773123] ata2.00: configured for UDMA/100
>[    1.775641] scsi 1:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCCH30N A101 PQ: 0 ANSI: 5
>[    1.778578] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>[    1.780108] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.781712] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.781837] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.784938] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H73N C106 PQ: 0 ANSI: 5
>[    1.789166] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.790800] sr 2:0:0:0: Attached scsi CD-ROM sr1
>[    1.790926] sr 2:0:0:0: Attached scsi generic sg2 type 5
>[    1.797503] Freeing unused kernel memory: 2788k freed
>[    1.807278] ehci_hcd 0000:00:1a.7: port 6 high speed
>[    1.807283] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    1.869458] device fsid 2a41acee2b46c46c-2d792a1a47497e87 devid 1 transid 225331 /dev/vg_navi-machine/lv_root
>[    1.869761] btrfs: use zlib compression
>[    1.907760] btrfs: disk space caching is enabled
>[    2.000294] usb 1-6: skipped 1 descriptor after configuration
>[    2.000299] usb 1-6: skipped 11 descriptors after interface
>[    2.000303] usb 1-6: skipped 1 descriptor after endpoint
>[    2.000306] usb 1-6: skipped 21 descriptors after interface
>[    2.000316] usb 1-6: skipped 1 descriptor after endpoint
>[    2.000319] usb 1-6: skipped 4 descriptors after interface
>[    2.000323] usb 1-6: skipped 2 descriptors after interface
>[    2.000326] usb 1-6: skipped 1 descriptor after endpoint
>[    2.000329] usb 1-6: skipped 2 descriptors after interface
>[    2.000332] usb 1-6: skipped 1 descriptor after endpoint
>[    2.000335] usb 1-6: skipped 2 descriptors after interface
>[    2.000343] usb 1-6: skipped 1 descriptor after endpoint
>[    2.000345] usb 1-6: skipped 2 descriptors after interface
>[    2.000346] usb 1-6: skipped 1 descriptor after endpoint
>[    2.002287] usb 1-6: default language 0x0409
>[    2.005287] usb 1-6: udev 5, busnum 1, minor = 4
>[    2.005290] usb 1-6: New USB device found, idVendor=046d, idProduct=0802
>[    2.005344] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>[    2.005376] usb 1-6: SerialNumber: 78A16A50
>[    2.005493] usb 1-6: usb_probe_device
>[    2.005496] usb 1-6: configuration #1 chosen from 1 choice
>[    2.005546] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
>[    2.005640] uvcvideo 1-6:1.0: usb_probe_interface
>[    2.005643] uvcvideo 1-6:1.0: usb_probe_interface - got id
>[    2.005656] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
>[    2.045541] input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input3
>[    2.045643] usb 1-6: adding 1-6:1.1 (config #1, interface 1)
>[    2.045687] usb 1-6: adding 1-6:1.2 (config #1, interface 2)
>[    2.045740] snd-usb-audio 1-6:1.2: usb_probe_interface
>[    2.045744] snd-usb-audio 1-6:1.2: usb_probe_interface - got id
>[    2.204013] usb usb3: suspend_rh (auto-stop)
>[    2.312432] usb 1-6: adding 1-6:1.3 (config #1, interface 3)
>[    2.312478] drivers/usb/core/inode.c: creating file '005'
>[    2.312495] hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
>[    2.312501] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>[    2.363204] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
>[    2.363209] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    2.363212] hub 2-0:1.0: port 2 not reset yet, waiting 50ms
>[    2.414013] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    2.414031] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    2.414035] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    2.414039] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[    2.414047] uhci_hcd 0000:00:1a.1: port 2 portsc 01a3,00
>[    2.414053] hub 4-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
>[    2.454015] usb usb7: suspend_rh (auto-stop)
>[    2.454036] usb usb8: suspend_rh (auto-stop)
>[    2.518016] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
>[    2.548560] scsi 4:0:0:0: Direct-Access     HP       Photosmart C4180 1.00 PQ: 0 ANSI: 2
>[    2.549046] sd 4:0:0:0: Attached scsi generic sg3 type 0
>[    2.550293] sd 4:0:0:0: [sdb] Attached SCSI removable disk
>[    2.620012] usb 4-2: new low speed USB device using uhci_hcd and address 2
>[    2.781497] usb 4-2: skipped 1 descriptor after interface
>[    2.787493] usb 4-2: default language 0x0409
>[    2.814495] usb 4-2: udev 2, busnum 4, minor = 385
>[    2.814499] usb 4-2: New USB device found, idVendor=413c, idProduct=2105
>[    2.814551] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.814587] usb 4-2: Product: Dell USB Keyboard
>[    2.814611] usb 4-2: Manufacturer: Dell
>[    2.814740] usb 4-2: usb_probe_device
>[    2.814744] usb 4-2: configuration #1 chosen from 1 choice
>[    2.835496] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
>[    2.850562] usbhid 4-2:1.0: usb_probe_interface
>[    2.850564] usbhid 4-2:1.0: usb_probe_interface - got id
>[    2.887132] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
>[    2.887183] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 16, phase 8, 118 us
>[    2.887279] generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-2/input0
>[    2.887343] drivers/usb/core/inode.c: creating file '002'
>[    2.887361] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    2.887367] uhci_hcd 0000:00:1a.2: port 1 portsc 01a3,00
>[    2.887372] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>[    2.991014] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>[    3.093017] usb 5-1: new low speed USB device using uhci_hcd and address 2
>[    3.234540] usb 5-1: skipped 1 descriptor after interface
>[    3.239536] usb 5-1: default language 0x0409
>[    3.254539] usb 5-1: udev 2, busnum 5, minor = 513
>[    3.254543] usb 5-1: New USB device found, idVendor=046d, idProduct=c408
>[    3.254597] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.254628] usb 5-1: Product: USB Trackball
>[    3.254648] usb 5-1: Manufacturer: Logitech
>[    3.254779] usb 5-1: usb_probe_device
>[    3.254782] usb 5-1: configuration #1 chosen from 1 choice
>[    3.257538] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[    3.257610] usbhid 5-1:1.0: usb_probe_interface
>[    3.257612] usbhid 5-1:1.0: usb_probe_interface - got id
>[    3.272769] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
>[    3.272957] generic-usb 0003:046D:C408.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.2-1/input0
>[    3.273027] drivers/usb/core/inode.c: creating file '002'
>[    3.273044] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[    3.273052] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
>[    3.273057] hub 6-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[    3.377015] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    3.479014] usb 6-2: new full speed USB device using uhci_hcd and address 2
>[    3.599011] usb 6-2: ep0 maxpacket = 8
>[    3.621498] usb 6-2: default language 0x0409
>[    3.643502] usb 6-2: udev 2, busnum 6, minor = 641
>[    3.643506] usb 6-2: New USB device found, idVendor=05ac, idProduct=1002
>[    3.643509] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.643513] usb 6-2: Product: Hub in Apple Extended USB Keyboard
>[    3.643516] usb 6-2: Manufacturer: Mitsumi Electric
>[    3.643635] usb 6-2: usb_probe_device
>[    3.643639] usb 6-2: configuration #1 chosen from 1 choice
>[    3.646501] usb 6-2: adding 6-2:1.0 (config #1, interface 0)
>[    3.646571] hub 6-2:1.0: usb_probe_interface
>[    3.646573] hub 6-2:1.0: usb_probe_interface - got id
>[    3.646575] hub 6-2:1.0: USB hub found
>[    3.648500] hub 6-2:1.0: 3 ports detected
>[    3.648503] hub 6-2:1.0: compound device; port removable status: FRR
>[    3.648506] hub 6-2:1.0: ganged power switching
>[    3.648508] hub 6-2:1.0: global over-current protection
>[    3.648511] hub 6-2:1.0: power on to power good time: 44ms
>[    3.649497] hub 6-2:1.0: hub controller current requirement: 50mA
>[    3.649500] hub 6-2:1.0: 100mA bus power budget for each child
>[    3.650498] hub 6-2:1.0: no over-current condition exists
>[    3.650501] hub 6-2:1.0: enabling power on all ports
>[    3.653517] drivers/usb/core/inode.c: creating file '002'
>[    3.653543] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
>[    3.653556] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
>[    3.754503] hub 6-2:1.0: port 1: status 0101 change 0001
>[    3.857018] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
>[    3.857031] hub 6-2:1.0: state 7 ports 3 chg 0002 evt 0000
>[    3.858503] hub 6-2:1.0: port 1, status 0101, change 0000, 12 Mb/s
>[    3.923505] usb 6-2.1: new full speed USB device using uhci_hcd and address 3
>[    4.007010] usb 6-2.1: ep0 maxpacket = 8
>[    4.028500] usb 6-2.1: skipped 1 descriptor after interface
>[    4.028505] usb 6-2.1: skipped 1 descriptor after interface
>[    4.033495] usb 6-2.1: default language 0x0409
>[    4.054501] usb 6-2.1: udev 3, busnum 6, minor = 642
>[    4.054505] usb 6-2.1: New USB device found, idVendor=05ac, idProduct=0204
>[    4.054508] usb 6-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>[    4.054512] usb 6-2.1: Product: Apple Extended USB Keyboard
>[    4.054514] usb 6-2.1: Manufacturer: Mitsumi Electric
>[    4.054605] usb 6-2.1: usb_probe_device
>[    4.054608] usb 6-2.1: configuration #1 chosen from 1 choice
>[    4.057503] usb 6-2.1: adding 6-2.1:1.0 (config #1, interface 0)
>[    4.057558] usbhid 6-2.1:1.0: usb_probe_interface
>[    4.057560] usbhid 6-2.1:1.0: usb_probe_interface - got id
>[    4.065103] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input6
>[    4.065112] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 17 us
>[    4.065169] generic-usb 0003:05AC:0204.0003: input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-2.1/input0
>[    4.065182] usb 6-2.1: adding 6-2.1:1.1 (config #1, interface 1)
>[    4.065210] usbhid 6-2.1:1.1: usb_probe_interface
>[    4.065211] usbhid 6-2.1:1.1: usb_probe_interface - got id
>[    4.068572] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input7
>[    4.068578] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 128, phase 0, 14 us
>[    4.068623] generic-usb 0003:05AC:0204.0004: input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-2.1/input1
>[    4.068638] drivers/usb/core/inode.c: creating file '003'
>[    4.068653] hub 6-2:1.0: 400mA power budget left
>[    4.068656] hub 6-2:1.0: state 7 ports 3 chg 0000 evt 0002
>[    4.409741] udev: starting version 151
>[    4.409795] udevd (1133): /proc/1133/oom_adj is deprecated, please use /proc/1133/oom_score_adj instead.
>[    4.698993] usb 1-6: link qh16-0001/ffff88007abff100 start 1 [1/0 us]
>[    4.699037] usb 1-6: unlink qh16-0001/ffff88007abff100 start 1 [1/0 us]
>[    6.252456] btrfs: use zlib compression
>[    6.455550] btrfs: use zlib compression
>[    7.416785] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    7.426666] device fsid 174fe42005f8107c-116d5f6de2d2fc93 devid 1 transid 468874 /dev/mapper/vg_navi--machine-lv_home
>[    7.426891] btrfs: use zlib compression
>[    7.482433] btrfs: disk space caching is enabled
>[   15.181663] Adding 2519036k swap on /dev/mapper/vg_navi--machine-lv_swap.  Priority:-1 extents:1 across:2519036k 
>[   19.127160] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[   19.178054] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[   22.211672] ehci_hcd 0000:00:1a.7: reused qh ffff88007abff100 schedule
>[   22.211676] usb 1-6: link qh16-0001/ffff88007abff100 start 1 [1/0 us]
>[   22.212306] usb 1-6: unlink qh16-0001/ffff88007abff100 start 1 [1/0 us]
>[   26.374294] ata1.00: configured for UDMA/133
>[   26.374299] ata1: EH complete
>[   26.374544] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   26.465160] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[   26.516054] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[   27.918768] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[   27.918772] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
>[  113.800602] BUG: unable to handle kernel paging request at ffffffff00000040
>[  113.800643] IP: [<ffffffff81339189>] nv50_vm_map_pgt+0x12/0xa9
>[  113.800675] PGD 1799067 PUD 0 
>[  113.800696] Oops: 0000 [#1] SMP 
>[  113.800717] last sysfs file: /sys/devices/virtual/sound/timer/uevent
>[  113.800746] CPU 1 
>[  113.800756] Modules linked in:
>[  113.800775] 
>[  113.800784] Pid: 8876, comm: X Not tainted 2.6.38 #1 Dell Inc. Vostro 200/0CU409
>[  113.800829] RIP: 0010:[<ffffffff81339189>]  [<ffffffff81339189>] nv50_vm_map_pgt+0x12/0xa9
>[  113.800867] RSP: 0018:ffff8800764c5c18  EFLAGS: 00010286
>[  113.800890] RAX: ffffffff00000000 RBX: ffff88007c012f00 RCX: ffff88007b7a8600
>[  113.800920] RDX: ffff88007bb10f48 RSI: 00000000000000a3 RDI: ffff88007b7a8600
>[  113.800950] RBP: ffff88007b7a8600 R08: 00000000003b7200 R09: 000000000006ca00
>[  113.800979] R10: ffff88007c78b000 R11: ffff88007c012f00 R12: 00000000000000a3
>[  113.801009] R13: ffff8800770f6b20 R14: 00000000000000a4 R15: 000000000006ca00
>[  113.801039] FS:  00007f6af3b27880(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
>[  113.801073] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[  113.801097] CR2: ffffffff00000040 CR3: 0000000076576000 CR4: 00000000000006e0
>[  113.801127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>[  113.801156] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>[  113.801186] Process X (pid: 8876, threadinfo ffff8800764c4000, task ffff8800772acc80)
>[  113.801218] Stack:
>[  113.801229]  ffff88007c012f00 ffff88007b7a8600 ffff880077f2d138 ffffffff812fc025
>[  113.801269]  ffff880077f2d000 ffff88007ba80000 ffff88007c78b000 ffff88007c78b000
>[  113.801309]  0000000000000000 ffffffff812e1f50 0000000000000002 ffff880077f2d000
>[  113.801336] Call Trace:
>[  113.801336]  [<ffffffff812fc025>] ? nouveau_vm_ref+0x73/0x126
>[  113.801336]  [<ffffffff812e1f50>] ? nouveau_gpuobj_channel_init+0x2ef/0x52b
>[  113.801336]  [<ffffffff812df48d>] ? nouveau_channel_alloc+0x381/0x5b6
>[  113.801336]  [<ffffffff812df70c>] ? nouveau_ioctl_fifo_alloc+0x4a/0x127
>[  113.801336]  [<ffffffff812c4fcd>] ? drm_ioctl+0x23b/0x2f4
>[  113.801336]  [<ffffffff812df6c2>] ? nouveau_ioctl_fifo_alloc+0x0/0x127
>[  113.801336]  [<ffffffff810ea246>] ? do_vfs_ioctl+0x45e/0x4ab
>[  113.801336]  [<ffffffff810ea2de>] ? sys_ioctl+0x4b/0x71
>[  113.801336]  [<ffffffff810028bb>] ? system_call_fastpath+0x16/0x1b
>[  113.801336] Code: c4 45 85 f6 0f 85 68 ff ff ff 48 83 c4 38 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 54 41 89 f4 55 48 89 fd 53 48 8b 02 48 85 c0 74 13 <48> 8b 58 40 8b 40 34 48 83 cb 03 c1 e8 03 c1 e0 0c eb 26 48 8b 
>[  113.801336] RIP  [<ffffffff81339189>] nv50_vm_map_pgt+0x12/0xa9
>[  113.801336]  RSP <ffff8800764c5c18>
>[  113.801336] CR2: ffffffff00000040
>[  113.801336] ---[ end trace a4d99942d812f4d9 ]---

Actions: View

Attachments on bug 35344: 44489 | 44490 | 44520

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.