Attachment 44705 Details for Bug 35531 – dmesg output with radeon.agpmode=-1

dmesg output with radeon.agpmode=-1

dmesg.agpmode-1 (text/plain), 24.37 KB, created by Christopher Head on 2011-03-21 21:26:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Christopher Head

Created: 2011-03-21 21:26:41 UTC

Size: 24.37 KB

patch

obsolete

>Linux version 2.6.36-gentoo-r5 (root@cicero) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #1 SMP Thu Dec 16 18:13:28 PST 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
>DMI 2.3 present.
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x3fff0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CEFFF write-protect
>  CF000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000f6850 00014 (v00 GBT   )
>ACPI: RSDT 3fff3000 0002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
>ACPI: FACP 3fff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
>ACPI: DSDT 3fff30c0 03E4A (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
>ACPI: FACS 3fff0000 00040
>ACPI: APIC 3fff6f40 00068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
>ACPI: Local APIC address 0xfee00000
>135MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003fff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000001 -> 0x0000009f
>    0: 0x00000100 -> 0x0003fff0
>On node 0 totalpages: 262030
>free_area_init_node: node 0, pgdat c1425100, node_mem_map c14ca020
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3966 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 272 pages used for memmap
>  HighMem zone: 34530 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>early_res array is doubled to 64 at [3000 - 37ff]
>PERCPU: Embedded 11 pages/cpu @c2000000 s29440 r0 d15616 u2097152
>pcpu-alloc: s29440 r0 d15616 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259982
>Kernel command line: root=/dev/sda1 rootflags=barrier=1 panic=60 quiet acpi_enforce_resources=lax radeon.agpmode=-1
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Subtract (37 early reservations)
>  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
>  #2 [0001000000 - 00014c1330]   TEXT DATA BSS
>  #3 [000009f800 - 0000100000]   BIOS reserved
>  #4 [00014c2000 - 00014c8076]             BRK
>  #5 [0000002000 - 0000003000]      TRAMPOLINE
>  #6 [0000007000 - 0000008000]         PGTABLE
>  #7 [00014c9000 - 00014ca000]         BOOTMEM
>  #8 [00014ca000 - 0001cca000]         BOOTMEM
>  #9 [00014c1380 - 00014c1384]         BOOTMEM
>  #10 [00014c1400 - 00014c14c0]         BOOTMEM
>  #11 [00014c1500 - 00014c1554]         BOOTMEM
>  #12 [0001cca000 - 0001ccd000]         BOOTMEM
>  #13 [00014c1580 - 00014c1590]         BOOTMEM
>  #14 [00014c8080 - 00014c8c80]         BOOTMEM
>  #15 [00014c1600 - 00014c1627]         BOOTMEM
>  #16 [00014c1680 - 00014c1760]         BOOTMEM
>  #17 [00014c1780 - 00014c17c0]         BOOTMEM
>  #18 [00014c1800 - 00014c1840]         BOOTMEM
>  #19 [00014c1880 - 00014c18c0]         BOOTMEM
>  #20 [00014c1900 - 00014c1940]         BOOTMEM
>  #21 [00014c1980 - 00014c19c0]         BOOTMEM
>  #22 [00014c1a00 - 00014c1a40]         BOOTMEM
>  #23 [00014c1a80 - 00014c1ac0]         BOOTMEM
>  #24 [00014c1b00 - 00014c1b5f]         BOOTMEM
>  #25 [00014c1b80 - 00014c1bdf]         BOOTMEM
>  #26 [0002000000 - 000200b000]         BOOTMEM
>  #27 [0002200000 - 000220b000]         BOOTMEM
>  #28 [00014c1c00 - 00014c1c04]         BOOTMEM
>  #29 [00014c1c80 - 00014c1c84]         BOOTMEM
>  #30 [00014c1d00 - 00014c1d08]         BOOTMEM
>  #31 [00014c1d80 - 00014c1d88]         BOOTMEM
>  #32 [00014c1e00 - 00014c1ea8]         BOOTMEM
>  #33 [00014c1f00 - 00014c1f68]         BOOTMEM
>  #34 [0001ccd000 - 0001cd1000]         BOOTMEM
>  #35 [0001cd1000 - 0001d51000]         BOOTMEM
>  #36 [0001d51000 - 0001d91000]         BOOTMEM
>Initializing HighMem for node 0 (000377fe:0003fff0)
>Memory: 1034128k/1048512k available (2929k kernel code, 13992k reserved, 1327k data, 340k init, 139208k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff8f000 - 0xfffff000   ( 448 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1429000 - 0xc147e000   ( 340 kB)
>      .data : 0xc12dc460 - 0xc14280d8   (1327 kB)
>      .text : 0xc1000000 - 0xc12dc460   (2929 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:320
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 2813.532 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.06 BogoMIPS (lpj=11254128)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>... version:                0
>... bit width:              40
>... generic registers:      18
>... value mask:             000000ffffffffff
>... max period:             0000007fffffffff
>... fixed-purpose events:   0
>... event mask:             000000000003ffff
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20100702
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Booting Node   0, Processors  #1 Ok.
>Initializing CPU#1
>Brought up 2 CPUs
>Total of 2 processors activated (11254.46 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfaed0, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x10c0-0x13ff] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x1400-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
>pci 0000:00:00.0: Enabling MCH 'Overflow' Device
>pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
>pci 0000:00:1d.0: reg 20: [io  0xcc00-0xcc1f]
>pci 0000:00:1d.1: reg 20: [io  0xc000-0xc01f]
>pci 0000:00:1d.2: reg 20: [io  0xc400-0xc41f]
>pci 0000:00:1d.3: reg 20: [io  0xc800-0xc81f]
>pci 0000:00:1d.7: reg 10: [mem 0xfa100000-0xfa1003ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
>pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
>pci 0000:00:1f.3: reg 20: [io  0x1400-0x141f]
>pci 0000:00:1f.5: reg 10: [io  0xd400-0xd4ff]
>pci 0000:00:1f.5: reg 14: [io  0xd800-0xd83f]
>pci 0000:00:1f.5: reg 18: [mem 0xfa101000-0xfa1011ff]
>pci 0000:00:1f.5: reg 1c: [mem 0xfa102000-0xfa1020ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xf9000000-0xf900ffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xa000-0xa0ff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xf9010000-0xf901ffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf9ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff pref]
>pci 0000:02:08.0: reg 10: [mem 0xfa000000-0xfa000fff]
>pci 0000:02:08.0: reg 14: [io  0xb000-0xb03f]
>pci 0000:02:08.0: supports D1 D2
>pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:08.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfa0fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved
>system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
>system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:00: [mem 0x000e0000-0x000effff] has been reserved
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>system 00:02: [io  0x0290-0x029f] has been reserved
>system 00:02: [io  0x0800-0x0805] has been reserved
>pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
>pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf9ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02]
>pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfa0fffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf9ffffff]
>pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
>pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfa0fffff]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>PCI: CLS 32 bytes, default 64
>microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
>microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>fuse init (API version 7.15)
>msgmni has been set to 1747
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 865 Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to userspace modesetting.
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>loop: module loaded
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e100 0000:02:08.0: PME# disabled
>e100 0000:02:08.0: eth0: addr 0xfa000000, irq 20, MAC addr 00:0d:61:35:6b:2d
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>it87: Found IT8712F chip at 0x290, revision 5
>it87: Beeping is supported
>ACPI: resource it87 [io  0x0295-0x0296] conflicts with ACPI region IP__ [??? 0x00000295-0x00000296 flags 0x5f]
>ACPI: This conflict may cause random problems and system instability
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A304, max UDMA/33
>ata1.00: HPA detected: current 312579695, native 312581808
>ata1.00: ATA-6: WDC WD1600JB-00EVA0, 15.05R15, max UDMA/100
>ata1.00: 312579695 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/33
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JB-00E 15.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4040B A304 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>logips2pp: Detected unknown logitech mouse model 62
>intel8x0_measure_ac97_clock: measured 55921 usecs (2694 samples)
>intel8x0: clocking to 48000
>ALSA device list:
>  #0: Intel ICH5 with ALC655 at irq 17
>TCP cubic registered
>NET: Registered protocol family 17
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>Using IPI Shortcut mode
>rtc_cmos 00:04: setting system clock to 2010-12-26 18:30:56 UTC (1293388256)
>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
>EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: barrier=1
>VFS: Mounted root (ext2 filesystem) readonly on device 8:1.
>Freeing unused kernel memory: 340k freed
>udev: starting version 151
>udevd (721): /proc/721/oom_adj is deprecated, please use /proc/721/oom_score_adj instead.
>EXT4-fs (sda1): re-mounted. Opts: barrier=1
>EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: (null)
>e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
>agpgart-intel 0000:00:00.0: AGP 3.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode
>pci 0000:01:00.0: putting AGP V3 device into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Can't use AGP base @0xf0000000, won't fit
>BUG: unable to handle kernel NULL pointer dereference at (null)
>IP: [<c1441242>] platform_device_register_resndata+0x0/0x78
>*pde = 00000000 
>Oops: 0002 [#1] SMP 
>last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/enable
>
>Pid: 3816, comm: X Not tainted 2.6.36-gentoo-r5 #1 8IPE1000/ 
>EIP: 0060:[<c1441242>] EFLAGS: 00013246 CPU: 1
>EIP is at platform_device_register_resndata+0x0/0x78
>EAX: 00000000 EBX: f7192800 ECX: 00000000 EDX: c13bc006
>ESI: f5c59ea4 EDI: f7157c00 EBP: f6a19b80 ESP: f5c59e4c
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process X (pid: 3816, ti=f5c58000 task=f681ae60 task.ti=f5c58000)
>Stack:
> c118187e 00000000 00000000 00000000 00000000 00000001 c13b8839 c12fe95c
><0> c13dc23b f6145a80 c110ffdd f6145a80 00000054 00000040 f7157c00 c116c63e
><0> f5c59ea4 c1416200 40546440 00000054 c1180e63 bf9f8490 00000004 00000898
>Call Trace:
> [<c118187e>] ? radeon_cp_init+0xa1b/0xcf8
> [<c110ffdd>] ? _copy_from_user+0x2b/0x10e
> [<c116c63e>] ? drm_ioctl+0x22b/0x2ad
> [<c1180e63>] ? radeon_cp_init+0x0/0xcf8
> [<c116c413>] ? drm_ioctl+0x0/0x2ad
> [<c107a43b>] ? do_vfs_ioctl+0x470/0x4bb
> [<c10700ab>] ? fsnotify_modify+0x49/0x50
> [<c10701c1>] ? do_sync_write+0x0/0xd3
> [<c107074b>] ? vfs_write+0x90/0xa2
> [<c107a4b3>] ? sys_ioctl+0x2d/0x44
> [<c1002410>] ? sysenter_do_call+0x12/0x26
>Code: 00 28 00 00 00 05 00 00 00 00 00 00 00 04 00 00 00 04 00 00 00 2b 00 00 00 0b 00 00 00 02 00 00 00 54 83 04 08 54 03 00 00 40 02 <00> 00 06 00 00 00 01 00 00 00 04 00 00 00 10 00 00 00 33 00 00 
>EIP: [<c1441242>] platform_device_register_resndata+0x0/0x78 SS:ESP 0068:f5c59e4c
>CR2: 0000000000000000
>---[ end trace d7e5251c710b6de8 ]---

Actions: View

Attachments on bug 35531: 44703 | 44704 | 44705

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.