Attachment 45177 Details for Bug 35812 – dmesg with kernel boot param drm.debug=0xe

dmesg with kernel boot param drm.debug=0xe

dmesg_0xe.txt (text/plain), 115.59 KB, created by Georg Grabler on 2011-04-03 04:59:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Georg Grabler

Created: 2011-04-03 04:59:06 UTC

Size: 115.59 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38-CHAKRA (phil@chakra-desktop) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Mon Mar 28 22:28:58 UTC 2011
>Command line: resume=/dev/disk/by-uuid/ed3cc85a-fb5b-466e-b249-1074fa544534 root=/dev/disk/by-uuid/4d67bb33-86cf-4c25-ae78-d1b277a0131b drm.debug=0xe ro
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
> BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
> BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
> BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
> BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
> BIOS-e820: 0000000040200000 - 00000000caa71000 (usable)
> BIOS-e820: 00000000caa71000 - 00000000caab5000 (reserved)
> BIOS-e820: 00000000caab5000 - 00000000cadb7000 (usable)
> BIOS-e820: 00000000cadb7000 - 00000000cade7000 (reserved)
> BIOS-e820: 00000000cade7000 - 00000000cafe7000 (ACPI NVS)
> BIOS-e820: 00000000cafe7000 - 00000000cafff000 (ACPI data)
> BIOS-e820: 00000000cafff000 - 00000000cb000000 (usable)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
> BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.6 present.
>DMI: Dell Inc. Latitude E6420/0K0DNP, BIOS A01 03/02/2011
>e820 update range: 0000000000000000 - 0000000000020000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x12e000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FF8000000 write-back
>  3 base 0C8000000 mask FFC000000 write-back
>  4 base 0CB000000 mask FFF000000 uncachable
>  5 base 100000000 mask FE0000000 write-back
>  6 base 120000000 mask FF0000000 write-back
>  7 base 12E000000 mask FFE000000 uncachable
>  8 disabled
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000cb000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcb000 max_arch_pfn = 0x400000000
>found SMP MP-table at [ffff8800000f1c70] f1c70
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000cb000000
> 0000000000 - 00cb000000 page 2M
>kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
>init_memory_mapping: 0000000100000000-000000012e000000
> 0100000000 - 012e000000 page 2M
>kernel direct mapping tables up to 12e000000 @ cadb1000-cadb7000
>RAMDISK: 1fe1c000 - 1fff0000
>ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
>ACPI: XSDT 00000000caffde18 0006C (v01 DELL    CBX3    06222004 MSFT 00010013)
>ACPI: FACP 00000000caf87d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
>ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110112/tbfadt-369)
>ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20110112/tbfadt-486)
>ACPI: DSDT 00000000caf6d018 089D5 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
>ACPI: FACS 00000000cafe4e40 00040
>ACPI: APIC 00000000caffcf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
>ACPI: TCPA 00000000cafe5d18 00032 (v02                 00000000      00000000)
>ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
>ACPI: HPET 00000000cafe5c18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
>ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
>ACPI: SSDT 00000000caf6c818 007C2 (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
>ACPI: SSDT 00000000caf6b018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
>ACPI: SLIC 00000000caf88a18 00176 (v03 DELL    CBX3    06222004 MSFT 00010013)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88001b600000-ffff88001effffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000020 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0012e000
>Movable zone start PFN for each node
>early_node_map[7] active PFN ranges
>    0: 0x00000020 -> 0x00000091
>    0: 0x00000100 -> 0x00020000
>    0: 0x00020200 -> 0x00040000
>    0: 0x00040200 -> 0x000caa71
>    0: 0x000caab5 -> 0x000cadb7
>    0: 0x000cafff -> 0x000cb000
>    0: 0x00100000 -> 0x0012e000
>On node 0 totalpages: 1018085
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3891 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 811436 pages, LIFO batch:31
>  Normal zone: 2576 pages used for memmap
>  Normal zone: 185840 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 16 CPUs, 12 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 0000000000091000 - 0000000000092000
>PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 0000000020000000 - 0000000020200000
>PM: Registered nosave memory: 0000000040000000 - 0000000040200000
>PM: Registered nosave memory: 00000000caa71000 - 00000000caab5000
>PM: Registered nosave memory: 00000000cadb7000 - 00000000cade7000
>PM: Registered nosave memory: 00000000cade7000 - 00000000cafe7000
>PM: Registered nosave memory: 00000000cafe7000 - 00000000cafff000
>PM: Registered nosave memory: 00000000cb000000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
>PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
>PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
>Allocating PCI resources starting at cb000000 (gap: cb000000:33d1c000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
>PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s81792 r8192 d20608 u131072
>pcpu-alloc: s81792 r8192 d20608 u131072 alloc=1*2097152
>pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1001167
>Kernel command line: resume=/dev/disk/by-uuid/ed3cc85a-fb5b-466e-b249-1074fa544534 root=/dev/disk/by-uuid/4d67bb33-86cf-4c25-ae78-d1b277a0131b drm.debug=0xe ro
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3929300k/4947968k available (3749k kernel code, 875628k absent, 143040k reserved, 2011k data, 504k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>Preemptable hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:2304
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 41943040 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2494.330 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.52 BogoMIPS (lpj=8314433)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>AppArmor: AppArmor disabled by boot time parameter
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 7 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20110112
>Setting APIC routing to physical flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz stepping 07
>Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>NMI watchdog enabled, takes one hw-pmu counter.
>Booting Node   0, Processors  #1
>NMI watchdog enabled, takes one hw-pmu counter.
> #2
>NMI watchdog enabled, takes one hw-pmu counter.
> #3
>NMI watchdog enabled, takes one hw-pmu counter.
>Brought up 4 CPUs
>Total of 4 processors activated (19962.11 BogoMIPS).
>devtmpfs: initialized
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>dmi type 0xB1 record - unknown flag
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 00000000cadd7718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
>ACPI: SSDT 00000000cadd8a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
>ACPI: SSDT 00000000cadd6d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 8 1f 
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff]
>pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
>pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
>pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
>pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
>pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
>pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff]
>pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff]
>pci 0000:00:19.0: reg 18: [io  0x4080-0x409f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
>pci 0000:00:1f.2: reg 10: [io  0x40d0-0x40d7]
>pci 0000:00:1f.2: reg 14: [io  0x40c0-0x40c3]
>pci 0000:00:1f.2: reg 18: [io  0x40b0-0x40b7]
>pci 0000:00:1f.2: reg 1c: [io  0x40a0-0x40a3]
>pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
>pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x4040-0x405f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:02:00.0: [8086:0082] type 0 class 0x000280
>pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.1:   bridge window [mem 0xe2d00000-0xe2dfffff]
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1c.2: PCI bridge to [bus 03-08]
>pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 09-09]
>pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>pci 0000:0a:00.0: [1217:8221] type 0 class 0x000805
>pci 0000:0a:00.0: reg 10: [mem 0xe2c20000-0xe2c201ff]
>pci 0000:0a:00.0: supports D1 D2
>pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0a:00.0: PME# disabled
>pci 0000:0a:00.1: [1217:8231] type 0 class 0x000180
>pci 0000:0a:00.1: reg 10: [mem 0xe2c10000-0xe2c10fff]
>pci 0000:0a:00.1: reg 18: [mem 0xe2c00000-0xe2c007ff]
>pci 0000:0a:00.1: supports D1 D2
>pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0a:00.1: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
>pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.5:   bridge window [mem 0xe2c00000-0xe2cfffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 19 1f 
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 0000000000091400 - 000000000009ffff 
>reserve RAM buffer: 00000000caa71000 - 00000000cbffffff 
>reserve RAM buffer: 00000000cadb7000 - 00000000cbffffff 
>reserve RAM buffer: 00000000cb000000 - 00000000cbffffff 
>reserve RAM buffer: 000000012e000000 - 000000012fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #2
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-3e]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0081-0x0091]
>pnp 00:01: [io  0x0093-0x009f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [mem 0xff000000-0xffffffff]
>pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x1000-0x100f]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x047f]
>pnp 00:05: [io  0x0500-0x057f]
>pnp 00:05: [io  0x164e-0x164f]
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x1000-0x100f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x047f] has been reserved
>system 00:05: [io  0x0500-0x057f] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0060]
>pnp 00:07: [io  0x0064]
>pnp 00:07: [irq 1]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: [io  0x03f8-0x03ff]
>pnp 00:08: [irq 4]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x0378-0x037b]
>pnp 00:09: [irq 7]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
>pnp 00:0a: [irq 12]
>pnp 00:0a: Plug and Play ACPI device, IDs DLL0493 PNP0f13 (active)
>pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:0b: [mem 0xfed10000-0xfed17fff]
>pnp 00:0b: [mem 0xfed18000-0xfed18fff]
>pnp 00:0b: [mem 0xfed19000-0xfed19fff]
>pnp 00:0b: [mem 0xf8000000-0xfbffffff]
>pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0b: [mem 0xfed90000-0xfed93fff]
>pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
>pnp 00:0b: [mem 0xff000000-0xffffffff]
>pnp 00:0b: [mem 0xfee00000-0xfeefffff]
>pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
>system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
>system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [irq 23]
>pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
>pnp 00:0d: [mem 0x20000000-0x201fffff]
>pnp 00:0d: [mem 0x40000000-0x401fffff]
>system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
>system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  disabled]
>pci 0000:00:1c.0:   bridge window [mem disabled]
>pci 0000:00:1c.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  disabled]
>pci 0000:00:1c.1:   bridge window [mem 0xe2d00000-0xe2dfffff]
>pci 0000:00:1c.1:   bridge window [mem pref disabled]
>pci 0000:00:1c.2: PCI bridge to [bus 03-08]
>pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 09-09]
>pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
>pci 0000:00:1c.5:   bridge window [io  disabled]
>pci 0000:00:1c.5:   bridge window [mem 0xe2c00000-0xe2cfffff]
>pci 0000:00:1c.5:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
>pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
>pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
>pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
>pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
>pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 1872k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880017600000 - ffff88001b600000
>software IO TLB at phys 0x17600000 - 0x1b600000
>Simple Boot Flag at 0xf3 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1301838987.886:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7678
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>intel_idle: MWAIT substates: 0x21120
>intel_idle: v0.4 model 0x2A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Linux agpgart interface v0.103
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042: Warning: Keylock active
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Checking hibernation image partition /dev/disk/by-uuid/ed3cc85a-fb5b-466e-b249-1074fa544534
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>rtc_cmos 00:06: setting system clock to 2011-04-03 13:56:28 UTC (1301838988)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 504k freed
>udev[45]: starting version 166
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 40
>ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 40
>ata3: DUMMY
>ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 40
>ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 40
>ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 40
>Refined TSC clocksource calibration: 2494.333 MHz.
>Switching to clocksource tsc
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>ata1.00: ATA-8: ST9500420AS, D005SDM1, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST9500420AS      D005 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D300, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-U633J D300 PQ: 0 ANSI: 5
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>PM: Starting manual resume from disk
>PM: Hibernation image partition 8:1 present
>PM: Looking for hibernation image.
>PM: Image not found (code -22)
>PM: Hibernation image not present or could not be loaded.
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.1: new high speed USB device using ehci_hcd and address 3
>hub 1-1.1:1.0: USB hub found
>hub 1-1.1:1.0: 3 ports detected
>usb 1-1.2: new high speed USB device using ehci_hcd and address 4
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 3 ports detected
>usb 1-1.4: new full speed USB device using ehci_hcd and address 5
>usb 2-1.8: new full speed USB device using ehci_hcd and address 3
>usb 2-1.8: config 0 descriptor??
>usb 1-1.1.1: new high speed USB device using ehci_hcd and address 6
>usb 1-1.1.1: device descriptor read/64, error -71
>usb 1-1.1.1: device descriptor read/64, error -71
>usb 1-1.1.1: new high speed USB device using ehci_hcd and address 7
>usb 1-1.1.1: device descriptor read/64, error -71
>usb 1-1.1.1: device descriptor read/64, error -71
>usb 1-1.1.1: new high speed USB device using ehci_hcd and address 8
>udev[578]: starting version 166
>e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
>e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>usb 1-1.1.1: device not accepting address 8, error -71
>usb 1-1.1.1: new high speed USB device using ehci_hcd and address 9
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:26:0a:48:40:90
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 3041FF-0FF
>cfg80211: Calling CRDA to update world regulatory domain
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: resource 0000:00:1f.3 [io  0x4040-0x405f] conflicts with ACPI region SMBI [io 0x4040-0x404f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
>sdhci-pci 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:0a:00.0: Invalid iomem size. You may experience problems.
>sdhci-pci 0000:0a:00.0: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>iTCO_vendor_support: vendor-support=0
>ACPI: Lid Switch [LID]
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>ACPI: acpi_idle yielding to intel_idle
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (25 C)
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>ACPI: Sleep Button [SBTN]
>wmi: Mapper loaded
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button [PWRF]
>ppdev: user-space parallel port driver
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>usb 1-1.1.1: device not accepting address 9, error -71
>hub 1-1.1:1.0: unable to enumerate USB device on port 1
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>iwlagn: Copyright(c) 2003-2010 Intel Corporation
>iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:02:00.0: setting latency timer to 64
>iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
>iwlagn 0000:02:00.0: device EEPROM VER=0x715, CALIB=0x6
>iwlagn 0000:02:00.0: Device SKU: 0Xb
>iwlagn 0000:02:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
>iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:02:00.0: irq 42 for MSI/MSI-X
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [BAT0] (battery present)
>usb 1-1.1.3: new full speed USB device using ehci_hcd and address 10
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>hub 1-1.1.3:1.0: USB hub found
>hub 1-1.1.3:1.0: 4 ports detected
>iwlagn 0000:02:00.0: loaded firmware version 17.168.5.1 build 33993
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>usb 1-1.1.3.1: new low speed USB device using ehci_hcd and address 11
>ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110112/evregion-474)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88012dc40988), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88012dc40af0), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\ECG5] (Node ffff88012dc40c08), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\_SB_.BAT1._STA] (Node ffff88012dc41500), AE_TIME (20110112/psparse-536)
>ACPI Exception: AE_ERROR, Evaluating _STA (20110112/battery-394)
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [BAT1] (battery absent)
>usb 1-1.1.3.2: new low speed USB device using ehci_hcd and address 12
>input: USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.1/1-1.1.3.1:1.0/input/input5
>generic-usb 0003:0B39:0D04.0001: input,hidraw0: USB HID v1.10 Keyboard [USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5] on usb-0000:00:1a.0-1.1.3.1/input0
>input: USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.1/1-1.1.3.1:1.1/input/input6
>generic-usb 0003:0B39:0D04.0002: input,hidraw1: USB HID v1.10 Mouse [USB KVM Switch 4 PORT V1.5 USB KVM Switch 4 PORT V1.5] on usb-0000:00:1a.0-1.1.3.1/input1
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.2/1-1.1.3.2:1.0/input/input7
>generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.1.3.2/input0
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.2/1-1.1.3.2:1.1/input/input8
>generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.1.3.2/input1
>usb 1-1.1.3.3: new low speed USB device using ehci_hcd and address 13
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.3/1-1.1.3.3:1.0/input/input9
>generic-usb 0003:046D:C051.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.1.3.3/input0
>ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110112/evregion-474)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88012dc40988), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88012dc40af0), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\ECG5] (Node ffff88012dc40c08), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\_SB_.BAT2._STA] (Node ffff88012dc41618), AE_TIME (20110112/psparse-536)
>ACPI Exception: AE_ERROR, Evaluating _STA (20110112/battery-394)
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: EC: input buffer is not empty, aborting transaction
>ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110112/evregion-474)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88012dc40988), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88012dc40af0), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\ECG5] (Node ffff88012dc40c08), AE_TIME (20110112/psparse-536)
>ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff88012dc412d0), AE_TIME (20110112/psparse-536)
>ACPI Exception: AE_TIME, Error reading AC Adapter state (20110112/ac-118)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Dell WMI hotkeys as /devices/virtual/input/input10
>lp0: using parport0 (interrupt-driven).
>agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input11
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xcaf68018
>[drm:intel_opregion_setup], Public ACPI methods supported
>[drm:intel_opregion_setup], SWSCI supported
>[drm:intel_opregion_setup], ASLE supported
>i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_detect_pch], Found CougarPoint PCH
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
>[drm:init_status_page], blt ring hws offset: 0x00042000
>[drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 114060 1600 1648 1680 2044 900 902 907 930 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_crt_init], pch crt adpa set to 0xf40000
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOB
>[drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_panel_get_backlight], get backlight PWM = 536
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:intel_panel_get_backlight], get backlight PWM = 536
>[drm:intel_panel_set_backlight], set backlight PWM = 0
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 0
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? yes
>[drm:drm_enable_connectors], connector 12 enabled? yes
>[drm:drm_enable_connectors], connector 15 enabled? no
>[drm:drm_enable_connectors], connector 17 enabled? no
>[drm:drm_enable_connectors], connector 21 enabled? no
>[drm:drm_enable_connectors], connector 24 enabled? no
>[drm:drm_enable_connectors], connector 26 enabled? no
>[drm:drm_enable_connectors], connector 29 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 5
>[drm:drm_target_preferred], looking for preferred mode on connector 5
>[drm:drm_target_preferred], found mode 1600x900
>[drm:drm_target_preferred], looking for cmdline mode on connector 12
>[drm:drm_target_preferred], looking for preferred mode on connector 12
>[drm:drm_target_preferred], found mode 1920x1080
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 4
>[drm:intelfb_create], allocated 1920x1080 fb: 0x00063000, bo ffff8801245bcc00
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_crtc_mode_set], using SSC reference clock of 120 MHz
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:36:1600x900]
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 114060
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 81, fbc lines 3, cursor 6
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], framebuffer not tiled, disabling compression
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 114060
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:46:1920x1080]
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 114060
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:12:VGA-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>Console: switching to colour frame buffer device 200x56
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>dell-wmi: Received unknown WMI event (0x0)
>acpi device:38: registered as cooling_device4
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
>hda_codec: connection list not available for 0xf
>input: HDA Intel PCH Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>input: HDA Intel PCH Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>input: HDA Intel PCH Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
>input: HDA Intel PCH HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>EXT4-fs (sda2): re-mounted. Opts: (null)
>EXT4-fs (sda2): re-mounted. Opts: (null)
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>Adding 8388604k swap on /dev/sda1.  Priority:-1 extents:1 across:8388604k 
>e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>loop: module loaded
>scsi6 : vhba
>scsi 6:0:0:0: CD-ROM            CDEmu    Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
>sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>sr 6:0:0:0: Attached scsi CD-ROM sr1
>sr 6:0:0:0: Attached scsi generic sg2 type 5
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:47] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_addfb], [FB:48]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_crtc_mode_set], using SSC reference clock of 120 MHz
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 00850000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:49:1024x768]
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 00850000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:50:1024x768]
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 65000
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:12:VGA-1] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:26:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:29:DP-3] status updated from 2 to 2
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:intel_panel_get_backlight], get backlight PWM = 536
>[drm:intel_panel_set_backlight], set backlight PWM = 0
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:drm_mode_addfb], [FB:51]
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:51] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:intel_pipe_set_base_atomic], Writing base 01CC9000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:51] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 48:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 48:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_panel_set_backlight], set backlight PWM = 0
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 47, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:ironlake_enable_fbc], enabled fbc on plane 1
>[drm:intel_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 48:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 01CC9000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_enable_fbc], enabled fbc on plane 1
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 47, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:48:]
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 65000
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 47, fbc lines 3, cursor 6
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_enable_fbc], enabled fbc on plane 1
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:12:VGA-1] set DPMS on
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:26:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:29:DP-3] status updated from 2 to 2
>NET: Registered protocol family 10
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>eth0: no IPv6 routers present
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:24:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:26:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:output_poll_execute], [CONNECTOR:29:DP-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:drm_mode_addfb], [FB:53]
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:intel_pipe_set_base_atomic], Writing base 076D4000 00000000 0 0 14336
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_enable_fbc], enabled fbc on plane 1
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (1920 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 51:"" 0 114060 1600 1648 1680 2044 900 902 907 930 0x0 0x9
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 51:"" 0 114060 1600 1648 1680 2044 900 902 907 930 0x0 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_update_fbc], unsupported config, disabling FBC
>[drm:ironlake_disable_fbc], disabled FBC
>[drm:intel_crtc_mode_set], using SSC reference clock of 120 MHz
>[drm:intel_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 51:"" 0 114060 1600 1648 1680 2044 900 902 907 930 0x0 0x9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_pipe_set_base_atomic], Writing base 076D4000 00001E00 1920 0 14336
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:51:]
>[drm:intel_update_watermarks], plane A (pipe 0) clock: 114060
>[drm:intel_update_watermarks], plane B (pipe 1) clock: 148500
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off
>[drm:intel_crtc_cursor_set], 
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40018, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_set_backlight], set backlight PWM = 536
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 41:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:29:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], cursor off

Actions: View

Attachments on bug 35812: 45069 | 45071 | 45072 | 45073 | 45074 | 45075 | 45076 | 45157 | 45177 | 63496

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.