Attachment 45669 Details for Bug 35901 – kernel log of non-working configuration

kernel log of non-working configuration

kernel_log_nouveau_NOT_WORKING.txt (text/plain), 45.68 KB, created by Mario Bachmann on 2011-04-15 08:12:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mario Bachmann

Created: 2011-04-15 08:12:33 UTC

Size: 45.68 KB

patch

obsolete

>Initializing cgroup subsys cpu
>Linux version 2.6.38.2 (root@x2) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP Mon Mar 28 09:13:01 CEST 2011
>Command line: BOOT_IMAGE=RES-382 ro root=803 loop.max_loop=32 powernow-k8.freq_list=2900,2800,2600,2400,2200,2000,1000 powernow-k8.vcore_list=1250,1225,1175,1125,1075,1025,1000 acpi_enforce_resources=lax quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000afef0000 (usable)
> BIOS-e820: 00000000afef0000 - 00000000afef3000 (ACPI NVS)
> BIOS-e820: 00000000afef3000 - 00000000aff00000 (ACPI data)
> BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.5 present.
>DMI: Unknow Unknow/AN-M2(MCP68S), BIOS 6.00 PG 10/29/2007
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x240000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFC0000000 write-back
>  2 base 0100000000 mask FF00000000 write-back
>  3 base 0200000000 mask FFC0000000 write-back
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>TOM2: 0000000240000000 aka 9216M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xafef0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000afef0000
> 0000000000 - 00afe00000 page 2M
> 00afe00000 - 00afef0000 page 4k
>kernel direct mapping tables up to afef0000 @ 1fffb000-20000000
>init_memory_mapping: 0000000100000000-0000000240000000
> 0100000000 - 0240000000 page 2M
>kernel direct mapping tables up to 240000000 @ afee6000-afef0000
>ACPI: RSDP 00000000000f7d20 00014 (v00 Nvidia)
>ACPI: RSDT 00000000afef3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
>ACPI: FACP 00000000afef3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
>ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
>ACPI: Override [DSDT-NVDAACPI], this is unsafe: tainting kernel
>Disabling lock debugging due to kernel taint
>ACPI: DSDT @ 0x00000000afef3100 Table override, replaced with:
>ACPI: DSDT ffffffff8163fe60 06DA0 (v01 NVIDIA NVDAACPI 00001000 INTL 20090521)
>ACPI: FACS 00000000afef1800 00040
>ACPI: SSDT 00000000afefab00 002CC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000afefae00 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
>ACPI: MCFG 00000000afefae40 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
>ACPI: APIC 00000000afefaa80 00072 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff88009c400000-ffff8800a31fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00240000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000afef0
>    0: 0x00100000 -> 0x00240000
>On node 0 totalpages: 2031230
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3920 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 702248 pages, LIFO batch:31
>  Normal zone: 17920 pages used for memmap
>  Normal zone: 1292800 pages, LIFO batch:31
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 25 pages/cpu @ffff8800afc00000 s73024 r8192 d21184 u1048576
>pcpu-alloc: s73024 r8192 d21184 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1998968
>Kernel command line: BOOT_IMAGE=RES-382 ro root=803 loop.max_loop=32 powernow-k8.freq_list=2900,2800,2600,2400,2200,2000,1000 powernow-k8.vcore_list=1250,1225,1175,1125,1075,1025,1000 acpi_enforce_resources=lax quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 120000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ a4000000
>Memory: 7860444k/9437184k available (4708k kernel code, 1312264k absent, 264476k reserved, 1897k data, 428k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:320
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2900.353 MHz processor.
>Marking TSC unstable due to TSCs unsynchronized
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5800.70 BogoMIPS (lpj=11601412)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>tseg: 00aff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>ACPI: Core revision 20110112
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 02
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (11600.67 BogoMIPS).
>NET: Registered protocol family 16
>node 0 link 0: io port [5000, ffff]
>TOM: 00000000c0000000 aka 3072M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [c0000000, efffffff]
>node 0 link 0: mmio [f4000000, fe02ffff]
>node 0 link 0: mmio [f0000000, f07fffff]
>TOM2: 0000000240000000 aka 9216M
>bus: [00, 08] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xc0000000-0xf3ffffff]
>bus: 00 index 3 [mem 0xf4000000-0xffffffff]
>bus: 00 index 4 [mem 0x240000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x5000-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c80] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
>pci 0000:00:00.0: [10de:0547] type 0 class 0x000500
>pci 0000:00:01.0: [10de:0548] type 0 class 0x000601
>pci 0000:00:01.1: [10de:0542] type 0 class 0x000c05
>pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
>pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
>pci 0000:00:01.1: reg 24: [io  0xf400-0xf43f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:01.2: [10de:0541] type 0 class 0x000500
>pci 0000:00:02.0: [10de:055e] type 0 class 0x000c03
>pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: [10de:055f] type 0 class 0x000c03
>pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:04.0: [10de:055e] type 0 class 0x000c03
>pci 0000:00:04.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:04.0: supports D1 D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:04.1: [10de:055f] type 0 class 0x000c03
>pci 0000:00:04.1: reg 10: [mem 0xfe02c000-0xfe02c0ff]
>pci 0000:00:04.1: supports D1 D2
>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.1: PME# disabled
>pci 0000:00:06.0: [10de:0560] type 0 class 0x000101
>pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
>pci 0000:00:07.0: [10de:055c] type 0 class 0x000403
>pci 0000:00:07.0: reg 10: [mem 0xfe020000-0xfe023fff]
>pci 0000:00:07.0: PME# supported from D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:08.0: [10de:0561] type 1 class 0x000604
>pci 0000:00:09.0: [10de:0554] type 0 class 0x000106
>pci 0000:00:09.0: reg 10: [io  0x09f0-0x09f7]
>pci 0000:00:09.0: reg 14: [io  0x0bf0-0x0bf3]
>pci 0000:00:09.0: reg 18: [io  0x0970-0x0977]
>pci 0000:00:09.0: reg 1c: [io  0x0b70-0x0b73]
>pci 0000:00:09.0: reg 20: [io  0xdc00-0xdc0f]
>pci 0000:00:09.0: reg 24: [mem 0xfe026000-0xfe027fff]
>pci 0000:00:0a.0: [10de:054c] type 0 class 0x000200
>pci 0000:00:0a.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
>pci 0000:00:0a.0: reg 14: [io  0xd800-0xd807]
>pci 0000:00:0a.0: reg 18: [mem 0xfe02a000-0xfe02a0ff]
>pci 0000:00:0a.0: reg 1c: [mem 0xfe029000-0xfe02900f]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: [10de:0562] type 1 class 0x000604
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: [10de:0563] type 1 class 0x000604
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: [10de:0563] type 1 class 0x000604
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: [10de:0563] type 1 class 0x000604
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:0f.0: [10de:0563] type 1 class 0x000604
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>pci 0000:00:10.0: [10de:0563] type 1 class 0x000604
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:11.0: [10de:0563] type 1 class 0x000604
>pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:11.0: PME# disabled
>pci 0000:00:12.0: [10de:053e] type 0 class 0x000300
>pci 0000:00:12.0: reg 10: [mem 0xfb000000-0xfbffffff]
>pci 0000:00:12.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:12.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
>pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
>PCI: peer root bus 00 res updated from pci conf
>pci 0000:01:0a.0: [10ec:8169] type 0 class 0x000200
>pci 0000:01:0a.0: reg 10: [io  0xcc00-0xccff]
>pci 0000:01:0a.0: reg 14: [mem 0xfd0ff000-0xfd0ff0ff]
>pci 0000:01:0a.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:0a.0: supports D1 D2
>pci 0000:01:0a.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:01:0a.0: PME# disabled
>pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
>pci 0000:00:08.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:08.0:   bridge window [mem 0xfd000000-0xfd0fffff]
>pci 0000:00:08.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
>pci 0000:00:08.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:08.0:   bridge window [mem 0xc0000000-0xf3ffffff] (subtractive decode)
>pci 0000:00:08.0:   bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
>pci 0000:00:08.0:   bridge window [mem 0x240000000-0xfcffffffff] (subtractive decode)
>pci 0000:00:0b.0: PCI bridge to [bus 02-02]
>pci 0000:00:0b.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:0b.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0b.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>pci 0000:00:0c.0: PCI bridge to [bus 03-03]
>pci 0000:00:0c.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:0c.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:0c.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:00:0d.0: PCI bridge to [bus 04-04]
>pci 0000:00:0d.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:0d.0:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:0d.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:00:0e.0: PCI bridge to [bus 05-05]
>pci 0000:00:0e.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:0e.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:0e.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci 0000:00:0f.0: PCI bridge to [bus 06-06]
>pci 0000:00:0f.0:   bridge window [io  0x7000-0x7fff]
>pci 0000:00:0f.0:   bridge window [mem 0xfd600000-0xfd6fffff]
>pci 0000:00:0f.0:   bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
>pci 0000:00:10.0: PCI bridge to [bus 07-07]
>pci 0000:00:10.0:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:10.0:   bridge window [mem 0xfd400000-0xfd4fffff]
>pci 0000:00:10.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci 0000:00:11.0: PCI bridge to [bus 08-08]
>pci 0000:00:11.0:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:11.0:   bridge window [mem 0xfd200000-0xfd2fffff]
>pci 0000:00:11.0:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x15)
> pci0000:00: ACPI _OSC control (0x15) granted
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LU2B] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009e400 - 000000000009ffff 
>reserve RAM buffer: 00000000afef0000 - 00000000afffffff 
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-08]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x03af window]
>pnp 00:00: [io  0x03e0-0x0cf7 window]
>pnp 00:00: [io  0x5000-0xffff window]
>pnp 00:00: [io  0x03b0-0x03df window]
>pnp 00:00: [io  0x1c00-0x1c80 window]
>pnp 00:00: [mem 0xfec80000-0xfecbffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0xc0000000-0xefffffff window]
>pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
>pnp 00:00: [mem 0x00000000 window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x1000-0x107f]
>pnp 00:01: [io  0x1080-0x10ff]
>pnp 00:01: [io  0x1400-0x147f]
>pnp 00:01: [io  0x1480-0x14ff]
>pnp 00:01: [io  0x1800-0x187f]
>pnp 00:01: [io  0x1880-0x18ff]
>pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
>pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
>pnp 00:01: [io  0x2000-0x207f]
>pnp 00:01: [io  0x2080-0x20ff]
>system 00:01: [io  0x1000-0x107f] has been reserved
>system 00:01: [io  0x1080-0x10ff] has been reserved
>system 00:01: [io  0x1400-0x147f] has been reserved
>system 00:01: [io  0x1480-0x14ff] has been reserved
>system 00:01: [io  0x1800-0x187f] has been reserved
>system 00:01: [io  0x1880-0x18ff] has been reserved
>system 00:01: [io  0x2000-0x207f] has been reserved
>system 00:01: [io  0x2080-0x20ff] has been reserved
>system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
>system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x0010-0x001f]
>pnp 00:02: [io  0x0022-0x003f]
>pnp 00:02: [io  0x0044-0x005f]
>pnp 00:02: [io  0x0062-0x0063]
>pnp 00:02: [io  0x0065-0x006f]
>pnp 00:02: [io  0x0074-0x007f]
>pnp 00:02: [io  0x0091-0x0093]
>pnp 00:02: [io  0x00a2-0x00bf]
>pnp 00:02: [io  0x00e0-0x00ef]
>pnp 00:02: [io  0x04d0-0x04d1]
>pnp 00:02: [io  0x0290-0x030f]
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>system 00:02: [io  0x0290-0x030f] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [irq 0 disabled]
>pnp 00:04: [irq 8]
>pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x0070-0x0073]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [io  0x0061]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:07: [io  0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [io  0x03f0-0x03f5]
>pnp 00:08: [io  0x03f7]
>pnp 00:08: [irq 6]
>pnp 00:08: [dma 2]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:09: [irq 12]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp 00:0a: [io  0x0060]
>pnp 00:0a: [io  0x0064]
>pnp 00:0a: [irq 1]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
>system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0x000f0000-0x000fffff]
>pnp 00:0c: [mem 0xfeff0000-0xfeff00ff]
>pnp 00:0c: [mem 0xafef0000-0xafefffff]
>pnp 00:0c: [mem 0xffff0000-0xffffffff]
>pnp 00:0c: [mem 0x00000000-0x0009ffff]
>pnp 00:0c: [mem 0x00100000-0xafeeffff]
>pnp 00:0c: [mem 0xb0000000-0xbfffffff]
>pnp 00:0c: [mem 0xfec00000-0xfec00fff]
>pnp 00:0c: [mem 0xfee00000-0xfeefffff]
>pnp 00:0c: [mem 0xfefff000-0xfeffffff]
>pnp 00:0c: [mem 0xfff80000-0xfff80fff]
>pnp 00:0c: [mem 0xfff90000-0xfffbffff]
>pnp 00:0c: [mem 0xfffed000-0xfffeffff]
>system 00:0c: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:0c: [mem 0xfeff0000-0xfeff00ff] has been reserved
>system 00:0c: [mem 0xafef0000-0xafefffff] could not be reserved
>system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0c: [mem 0x00100000-0xafeeffff] could not be reserved
>system 00:0c: [mem 0xb0000000-0xbfffffff] has been reserved
>system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved
>system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
>system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
>system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:12.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
>pci 0000:01:0a.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
>pci 0000:00:08.0: PCI bridge to [bus 01-01]
>pci 0000:00:08.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:08.0:   bridge window [mem 0xfd000000-0xfd0fffff]
>pci 0000:00:08.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
>pci 0000:00:0b.0: PCI bridge to [bus 02-02]
>pci 0000:00:0b.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:0b.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0b.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>pci 0000:00:0c.0: PCI bridge to [bus 03-03]
>pci 0000:00:0c.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:0c.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:0c.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:00:0d.0: PCI bridge to [bus 04-04]
>pci 0000:00:0d.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:0d.0:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:0d.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:00:0e.0: PCI bridge to [bus 05-05]
>pci 0000:00:0e.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:0e.0:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:0e.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci 0000:00:0f.0: PCI bridge to [bus 06-06]
>pci 0000:00:0f.0:   bridge window [io  0x7000-0x7fff]
>pci 0000:00:0f.0:   bridge window [mem 0xfd600000-0xfd6fffff]
>pci 0000:00:0f.0:   bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
>pci 0000:00:10.0: PCI bridge to [bus 07-07]
>pci 0000:00:10.0:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:10.0:   bridge window [mem 0xfd400000-0xfd4fffff]
>pci 0000:00:10.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci 0000:00:11.0: PCI bridge to [bus 08-08]
>pci 0000:00:11.0:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:11.0:   bridge window [mem 0xfd200000-0xfd2fffff]
>pci 0000:00:11.0:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
>pci 0000:00:08.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>pci 0000:00:10.0: setting latency timer to 64
>pci 0000:00:11.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 6 [mem 0xc0000000-0xf3ffffff]
>pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
>pci_bus 0000:00: resource 8 [mem 0x240000000-0xfcffffffff]
>pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfd0fffff]
>pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
>pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:01: resource 6 [mem 0xc0000000-0xf3ffffff]
>pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
>pci_bus 0000:01: resource 8 [mem 0x240000000-0xfcffffffff]
>pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
>pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0x8000-0x8fff]
>pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]
>pci_bus 0000:05: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x7000-0x7fff]
>pci_bus 0000:06: resource 1 [mem 0xfd600000-0xfd6fffff]
>pci_bus 0000:06: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
>pci_bus 0000:07: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:07: resource 1 [mem 0xfd400000-0xfd4fffff]
>pci_bus 0000:07: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci_bus 0000:08: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:08: resource 1 [mem 0xfd200000-0xfd2fffff]
>pci_bus 0000:08: resource 2 [mem 0xfd100000-0xfd1fffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:00.0: Found enabled HT MSI Mapping
>pci 0000:00:12.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ a4000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>kvm: Nested Virtualization enabled
>audit: initializing netlink socket (disabled)
>type=2000 audit(1302885966.200:1): initialized
>Registering the id_resolver key type
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>msgmni has been set to 15481
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:0b.0: setting latency timer to 64
>pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:0c.0: setting latency timer to 64
>pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
>pcieport 0000:00:0d.0: setting latency timer to 64
>pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
>pcieport 0000:00:0e.0: setting latency timer to 64
>pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
>pcieport 0000:00:0f.0: setting latency timer to 64
>pcieport 0000:00:0f.0: irq 44 for MSI/MSI-X
>pcieport 0000:00:10.0: setting latency timer to 64
>pcieport 0000:00:10.0: irq 45 for MSI/MSI-X
>pcieport 0000:00:11.0: setting latency timer to 64
>pcieport 0000:00:11.0: irq 46 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN] (on)
>ACPI: acpi_idle registered with cpuidle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (44 C)
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>loop: module loaded
>ahci 0000:00:09.0: version 3.0
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
>ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio 
>ahci 0000:00:09.0: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
>ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
>ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 23
>pata_amd 0000:00:06.0: version 0.4.1
>pata_amd 0000:00:06.0: setting latency timer to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:0a.0: setting latency timer to 64
>ata5.00: ATAPI: IOMEGA  ZIP 100       ATAPI, 14.A, max PIO2, CDB intr
>ata5: nv_mode_filter: 0x7&0xfff9f->0x7, BIOS=0x0 (0x0) ACPI=0x1 (600:600:0x10)
>ata5.00: configured for PIO2
>ata4: SATA link down (SStatus 0 SControl 300)
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:50:8d:b6:61:84
>forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
>ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:04.1: setting latency timer to 64
>ehci_hcd 0000:00:04.1: EHCI Host Controller
>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:04.1: debug port 1
>ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 5 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 5 ports detected
>ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
>ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:04.0: setting latency timer to 64
>ohci_hcd 0000:00:04.0: OHCI Host Controller
>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>rtc_cmos 00:05: RTC can wake from S4
>ata2.00: configured for UDMA/133
>ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS50, XP01, max UDMA/100
>ata3.00: configured for UDMA/100
>ata1.00: ATA-8: WDC WD5000AAKS-08V0A0, 05.01D05, max UDMA/100
>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>i2c /dev entries driver
>ACPI: resource nForce2_smbus [io  0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
>ACPI: This conflict may cause random problems and system instability
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>i2c i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c i2c-1: nForce2 SMBus adapter at 0xf400
>w83627ehf: Found W83627DHG chip at 0x290
>ACPI: resource w83627ehf [io  0x0295-0x0296] conflicts with ACPI region SEN1 [io 0x295-0x296]
>ACPI: This conflict may cause random problems and system instability
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>cpuidle: using governor ladder
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Registering the dns_resolver key type
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00)
>powernow-k8: Requested 2900MHz with 1250mV
>powernow-k8: Requested 2800MHz with 1225mV
>powernow-k8: Requested 2600MHz with 1175mV
>powernow-k8: Requested 2400MHz with 1125mV
>powernow-k8: Requested 2200MHz with 1075mV
>powernow-k8: Requested 2000MHz with 1025mV
>powernow-k8: Requested 1000MHz with 1000mV
>powernow-k8:    0 : fid 0x15 (2900 MHz), vid 0xc
>powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0xd
>powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xf
>powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0x11
>powernow-k8:    4 : fid 0xe (2200 MHz), vid 0x13
>powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x15
>powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x16
>rtc_cmos 00:05: setting system clock to 2011-04-15 16:46:07 UTC (1302885967)
>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NS50  XP01 PQ: 0 ANSI: 5
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>sr 2:0:0:0: Attached scsi generic sg2 type 5
>scsi 4:0:0:0: Direct-Access     IOMEGA   ZIP 100          14.A PQ: 0 ANSI: 5
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>ata6: port disabled. ignoring.
>sd 4:0:0:0: [sdc] Attached SCSI removable disk
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>logips2pp: Detected unknown logitech mouse model 116
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3
>UDF-fs: No partition found (1)
>XFS mounting filesystem sda3
>Ending clean XFS mount for filesystem: sda3
>VFS: Mounted root (xfs filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 428k freed
><30>udev[980]: starting version 167
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
>HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
>hda_intel: Disable MSI for Nvidia chipset
>HDA Intel 0000:00:07.0: setting latency timer to 64
>dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
>dvb-usb: will use the device's hardware PID filter (table count: 16).
>DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device)
>DVB: registering adapter 0 frontend 0 (DiBcom 3000M-B DVB-T)...
>dibusb: This device has the Thomson Cable onboard. Which is default.
>input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/input/input4
>dvb-usb: schedule remote query interval to 150 msecs.
>dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
>usbcore: registered new interface driver dvb_usb_dibusb_mb
>hda_codec: ALC888: BIOS auto-probing.
>ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
>nouveau 0000:00:12.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20
>nouveau 0000:00:12.0: setting latency timer to 64
>[drm] nouveau 0000:00:12.0: Detected an NV40 generation card (0x067000a1)
>[drm] nouveau 0000:00:12.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:00:12.0: ... appears to be valid
>[drm] nouveau 0000:00:12.0: BIT BIOS found
>[drm] nouveau 0000:00:12.0: Bios version 05.67.32.24
>[drm] nouveau 0000:00:12.0: TMDS table version 1.1
>[drm] nouveau 0000:00:12.0: TMDS table script pointers not stubbed
>[drm] nouveau 0000:00:12.0: BIT table 'd' not found
>[drm] nouveau 0000:00:12.0: Found Display Configuration Block version 3.0
>[drm] nouveau 0000:00:12.0: Raw DCB entry 0: 02000310 00000023
>[drm] nouveau 0000:00:12.0: Raw DCB entry 1: 04031322 00000000
>[drm] nouveau 0000:00:12.0: DCB connector table: VHER 0x30 5 10 2
>[drm] nouveau 0000:00:12.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
>[drm] nouveau 0000:00:12.0:   1: 0x00001131: type 0x31 idx 1 tag 0x07
>[drm] nouveau 0000:00:12.0: Parsing VBIOS init table 0 at offset 0xD897
>[drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB =======
>[drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB =======
>[drm] nouveau 0000:00:12.0: Parsing VBIOS init table 1 at offset 0xD9F5
>[drm] nouveau 0000:00:12.0: Parsing VBIOS init table 2 at offset 0xD9F6
>[drm] nouveau 0000:00:12.0: Parsing VBIOS init table 3 at offset 0xDB78
>[drm] nouveau 0000:00:12.0: Parsing VBIOS init table 4 at offset 0xDBF8
>[drm] nouveau 0000:00:12.0: Pointer to flat panel table invalid
>[drm] nouveau 0000:00:12.0: 1 available performance level(s)
>[drm] nouveau 0000:00:12.0: 0: memory 0MHz core 425MHz fanspeed 100%
>[drm] nouveau 0000:00:12.0: c: memory 0MHz
>[TTM] Zone  kernel: Available graphics memory: 3963412 kiB.
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[TTM] Initializing pool allocator.
>[drm] nouveau 0000:00:12.0: Detected 256MiB VRAM
>[drm] nouveau 0000:00:12.0: 64 MiB GART (aperture)
>[drm] nouveau 0000:00:12.0: Saving VGA fonts
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: allocated 1920x1080 fb: 0x49000, bo ffff88023ed6bc00
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:00:12.0: Output VGA-1 is running on CRTC 0 using output B
>[drm] nouveau 0000:00:12.0: 0xCF99: Parsing digital output script table
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Output DVI-D-1 is running on CRTC 1 using output C
>Console: switching to colour frame buffer device 240x67
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:00:12.0 on minor 0
>XFS mounting filesystem sda2
>Ending clean XFS mount for filesystem: sda2
>XFS mounting filesystem sda5
>Ending clean XFS mount for filesystem: sda5
>XFS mounting filesystem sdb5
>Ending clean XFS mount for filesystem: sdb5
>Adding 2299996k swap on /dev/sda6.  Priority:1 extents:1 across:2299996k 
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>forcedeth 0000:00:0a.0: irq 47 for MSI/MSI-X
>NET: Registered protocol family 10
>XFS mounting filesystem loop0
>Ending clean XFS mount for filesystem: loop0
>XFS mounting filesystem loop1
>XFS: Invalid block length (0x2000) given for buffer
>Ending clean XFS mount for filesystem: loop1
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: 0xCF99: Parsing digital output script table
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Output DVI-D-1 is running on CRTC 1 using output C
>eth0: no IPv6 routers present
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata2.00: configured for UDMA/133
>ata2: EH complete
>'firehol: 'IN-INTERNET':'IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:25:22:06:1d:77:08:00 SRC=192.168.0.8 DST=192.168.0.255 LEN=258 TOS=0x00 PREC=0x00 TTL=69 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238 
>'firehol: 'IN-INTERNET':'IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:25:22:06:1d:77:08:00 SRC=192.168.0.8 DST=192.168.0.255 LEN=235 TOS=0x00 PREC=0x00 TTL=69 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=215 
>'firehol: 'IN-INTERNET':'IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:25:22:06:1d:77:08:00 SRC=192.168.0.8 DST=192.168.0.255 LEN=258 TOS=0x00 PREC=0x00 TTL=69 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238 
>'firehol: 'IN-INTERNET':'IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:25:22:06:1d:77:08:00 SRC=192.168.0.8 DST=192.168.0.255 LEN=235 TOS=0x00 PREC=0x00 TTL=69 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=215 
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:00:12.0: Output VGA-1 is running on CRTC 0 using output B
>[drm] nouveau 0000:00:12.0: 0xCF99: Parsing digital output script table
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Output DVI-D-1 is running on CRTC 1 using output C
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: 0xCF99: Parsing digital output script table
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Output DVI-D-1 is running on CRTC 1 using output C
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:00:12.0: Output VGA-1 is running on CRTC 0 using output B
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: 0xCF99: Parsing digital output script table
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Output DVI-D-1 is running on CRTC 1 using output C
>[drm] nouveau 0000:00:12.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: 0xCF99: Parsing digital output script table
>[drm] nouveau 0000:00:12.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:00:12.0: Output DVI-D-1 is running on CRTC 1 using output C

Actions: View

Attachments on bug 35901: 45649 | 45650 | 45669 | 45670 | 45671 | 45672 | 47074

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.