Attachment 46103 Details for Bug 36246 – dmesg after applying 1, 2 & 3 but leaving tv connector enabled

dmesg after applying 1, 2 & 3 but leaving tv connector enabled

dmesg-2.6.39-rc4-htpc.0.2-tv_connected (text/plain), 76.83 KB, created by Scott MacKenzie on 2011-04-26 20:43:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Scott MacKenzie

Created: 2011-04-26 20:43:24 UTC

Size: 76.83 KB

patch

obsolete

>Linux version 2.6.39-rc4-htpc-686 (root@localhost) (gcc version 4.3.2 (Debian 4.3.2-1) ) #1 Wed Apr 27 10:55:35 EST 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
> BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
> BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI 2.3 present.
>DMI:    /i915GMm-HFS, BIOS 6.00 PG 06/06/2005
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x3f7f0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-F7FFF uncachable
>  F8000-FBFFF write-through
>  FC000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 03F800000 mask FFF800000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>initial memory mapped : 0 - 01800000
>Base memory trampoline at [c009b000] 9b000 size 12288
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
>ACPI: RSDP 000f9210 00014 (v00 AOpen )
>ACPI: RSDT 3f7f3040 00038 (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
>ACPI: FACP 3f7f30c0 00074 (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
>ACPI: DSDT 3f7f3180 042E3 (v01 AOPEN  AWRDACPI 00001000 MSFT 0100000E)
>ACPI: FACS 3f7f0000 00040
>ACPI: MCFG 3f7f7580 0003C (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
>ACPI: APIC 3f7f74c0 0005A (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
>ACPI: SSDT 3f7f7600 00222 (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
>ACPI: SSDT 3f7f7a00 000E0 (v01  PmRef    CpuPm 00003000 INTL 20040311)
>ACPI: Local APIC address 0xfee00000
>127MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003f7f0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x0003f7f0
>On node 0 totalpages: 259966
>free_area_init_node: node 0, pgdat c13caae0, node_mem_map f700d200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3950 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 256 pages used for memmap
>  HighMem zone: 32498 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 3f800000 (gap: 3f800000:a0800000)
>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257934
>Kernel command line: BOOT_IMAGE=Linux_Exp3 ro acpi_enforce_resources=lax modeset=1 root=825 drm.debug=14 log_buf_len=16M
>log_buf_len: 16777216
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0003f7f0)
>Memory: 1009940k/1040320k available (2677k kernel code, 29924k reserved, 1219k data, 356k init, 131016k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc13cf000 - 0xc1428000   ( 356 kB)
>      .data : 0xc129d756 - 0xc13ce600   (1219 kB)
>      .text : 0xc1000000 - 0xc129d756   (2677 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>NR_IRQS:288
>CPU 0 irqstacks, hard=f5808000 soft=f580a000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1995.872 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.06 BogoMIPS (lpj=6652906)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>mce: CPU supports 5 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
>ACPI: Core revision 20110316
>Performance Events: p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>PM: Registering ACPI NVS region at 3f7f0000 (12288 bytes)
>print_constraints: dummy: 
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xfebfffff] (ignored)
>pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
>pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xd0400000-0xd047ffff]
>pci 0000:00:02.0: reg 14: [io  0xe000-0xe007]
>pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xd0500000-0xd053ffff]
>pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xd0480000-0xd04fffff]
>pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xd0540000-0xd0543fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: [8086:2664] type 1 class 0x000604
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: [8086:2666] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0xe100-0xe11f]
>pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0xe200-0xe21f]
>pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0xe300-0xe31f]
>pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
>pci 0000:00:1d.3: reg 20: [io  0xe400-0xe41f]
>pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
>pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
>pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
>pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101
>pci 0000:00:1f.2: reg 10: [io  0xe500-0xe507]
>pci 0000:00:1f.2: reg 14: [io  0xe600-0xe603]
>pci 0000:00:1f.2: reg 18: [io  0xe700-0xe707]
>pci 0000:00:1f.2: reg 1c: [io  0xe800-0xe803]
>pci 0000:00:1f.2: reg 20: [io  0xe900-0xe90f]
>pci 0000:00:1f.2: reg 24: [mem 0xd0545000-0xd05453ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
>pci 0000:02:00.0: [11ab:4362] type 0 class 0x000200
>pci 0000:02:00.0: reg 10: [mem 0xd0020000-0xd0023fff 64bit]
>pci 0000:02:00.0: reg 18: [io  0xb000-0xb0ff]
>pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:00.0: [11ab:4362] type 0 class 0x000200
>pci 0000:03:00.0: reg 10: [mem 0xd0120000-0xd0123fff 64bit]
>pci 0000:03:00.0: reg 18: [io  0xc000-0xc0ff]
>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.2: PCI bridge to [bus 03-03]
>pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1c.2:   bridge window [mem 0xd0100000-0xd01fffff]
>pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:04:00.0: [1095:3132] type 0 class 0x000104
>pci 0000:04:00.0: reg 10: [mem 0xd0284000-0xd028407f 64bit]
>pci 0000:04:00.0: reg 18: [mem 0xd0280000-0xd0283fff 64bit]
>pci 0000:04:00.0: reg 20: [io  0xd000-0xd07f]
>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.3: PCI bridge to [bus 04-04]
>pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.3:   bridge window [mem 0xd0200000-0xd02fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:05:03.0: [11c1:5811] type 0 class 0x000c00
>pci 0000:05:03.0: reg 10: [mem 0xd0300000-0xd0300fff]
>pci 0000:05:03.0: supports D1 D2
>pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:03.0: PME# disabled
>pci 0000:05:04.0: [1131:7133] type 0 class 0x000480
>pci 0000:05:04.0: reg 10: [mem 0xd0301000-0xd03017ff]
>pci 0000:05:04.0: supports D1 D2
>pci 0000:05:05.0: [1131:7134] type 0 class 0x000480
>pci 0000:05:05.0: reg 10: [mem 0xd0302000-0xd03023ff]
>pci 0000:05:05.0: supports D1 D2
>pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xd0300000-0xd03fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009e000 - 000000000009ffff 
>reserve RAM buffer: 000000003f7f0000 - 000000003fffffff 
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0x3f800000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x0b78-0x0b7b]
>pnp 00:01: [io  0x0f78-0x0f7b]
>pnp 00:01: [io  0x0a78-0x0a7b]
>pnp 00:01: [io  0x0e78-0x0e7b]
>pnp 00:01: [io  0x0bbc-0x0bbf]
>pnp 00:01: [io  0x0fbc-0x0fbf]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0290-0x030f]
>pnp 00:01: [io  0x0880-0x088f]
>system 00:01: [io  0x0b78-0x0b7b] has been reserved
>system 00:01: [io  0x0f78-0x0f7b] has been reserved
>system 00:01: [io  0x0a78-0x0a7b] has been reserved
>system 00:01: [io  0x0e78-0x0e7b] has been reserved
>system 00:01: [io  0x0bbc-0x0bbf] has been reserved
>system 00:01: [io  0x0fbc-0x0fbf] has been reserved
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0290-0x030f] has been reserved
>system 00:01: [io  0x0880-0x088f] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0080-0x0090]
>pnp 00:02: [io  0x0094-0x009f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0073]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x00f0-0x00ff]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x03f0-0x03f5]
>pnp 00:06: [io  0x03f7]
>pnp 00:06: [irq 6]
>pnp 00:06: [dma 2]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:07: [io  0x03f8-0x03ff]
>pnp 00:07: [irq 4]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:08: [io  0x02f8-0x02ff]
>pnp 00:08: [irq 3]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>Switched to NOHz mode on CPU #0
>pnp 00:09: [io  0x0378-0x037f]
>pnp 00:09: [io  0x0778-0x077b]
>pnp 00:09: [irq 7]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:0a: [io  0x0060]
>pnp 00:0a: [io  0x0064]
>pnp 00:0a: [irq 1]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:0b: [io  0x4000-0x40bf]
>system 00:0b: [io  0x4000-0x40bf] could not be reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0xffb80000-0xffbfffff]
>pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:0d: [mem 0xe0000000-0xefffffff]
>system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0x000d7800-0x000d7fff]
>pnp 00:0e: [mem 0x000f0000-0x000f7fff]
>pnp 00:0e: [mem 0x000f8000-0x000fbfff]
>pnp 00:0e: [mem 0x000fc000-0x000fffff]
>pnp 00:0e: [mem 0x3f7f0000-0x3f7fffff]
>pnp 00:0e: [mem 0x00000000-0x0009ffff]
>pnp 00:0e: [mem 0x00100000-0x3f7effff]
>pnp 00:0e: [mem 0xfec00000-0xfec00fff]
>pnp 00:0e: [mem 0xfed13000-0xfed1dfff]
>pnp 00:0e: [mem 0xfed20000-0xfed8ffff]
>pnp 00:0e: [mem 0xfee00000-0xfee00fff]
>pnp 00:0e: [mem 0xffb00000-0xffb7ffff]
>pnp 00:0e: [mem 0xfff00000-0xffffffff]
>pnp 00:0e: [mem 0x000e0000-0x000effff]
>system 00:0e: [mem 0x000d7800-0x000d7fff] has been reserved
>system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:0e: [mem 0x3f7f0000-0x3f7fffff] could not be reserved
>system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0e: [mem 0x00100000-0x3f7effff] could not be reserved
>system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0e: [mem 0xfed13000-0xfed1dfff] has been reserved
>system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved
>system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0e: [mem 0x000e0000-0x000effff] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>pci 0000:00:1c.1: BAR 9: assigned [mem 0x40000000-0x400fffff pref]
>pci 0000:00:1c.2: BAR 9: assigned [mem 0x40100000-0x401fffff pref]
>pci 0000:00:1c.3: BAR 9: assigned [mem 0x40200000-0x402fffff pref]
>pci 0000:00:1c.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0x40400000-0x405fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x40600000-0x407fffff 64bit pref]
>pci 0000:02:00.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
>pci 0000:00:1c.1:   bridge window [mem 0x40000000-0x400fffff pref]
>pci 0000:03:00.0: BAR 6: assigned [mem 0x40100000-0x4011ffff pref]
>pci 0000:00:1c.2: PCI bridge to [bus 03-03]
>pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:1c.2:   bridge window [mem 0xd0100000-0xd01fffff]
>pci 0000:00:1c.2:   bridge window [mem 0x40100000-0x401fffff pref]
>pci 0000:04:00.0: BAR 6: assigned [mem 0x40200000-0x4027ffff pref]
>pci 0000:00:1c.3: PCI bridge to [bus 04-04]
>pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.3:   bridge window [mem 0xd0200000-0xd02fffff]
>pci 0000:00:1c.3:   bridge window [mem 0x40200000-0x403fffff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xd0300000-0xd03fffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: enabling device (0100 -> 0103)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:01: resource 1 [mem 0x40400000-0x405fffff]
>pci_bus 0000:01: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
>pci_bus 0000:02: resource 2 [mem 0x40000000-0x400fffff pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
>pci_bus 0000:03: resource 2 [mem 0x40100000-0x401fffff pref]
>pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:04: resource 1 [mem 0xd0200000-0xd02fffff]
>pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff pref]
>pci_bus 0000:05: resource 1 [mem 0xd0300000-0xd03fffff]
>pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 32 bytes, default 64
>audit: initializing netlink socket (disabled)
>type=2000 audit(1303873773.119:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1716
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.3: setting latency timer to 64
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm:intel_opregion_setup], graphic opregion physical addr: 0x0
>[drm:intel_opregion_setup], ACPI OpRegion not supported!
>[drm:i915_init_phys_hws], Enabled hardware status page
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
>[drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5, i2c_speed=83
>[drm:parse_sdvo_device_mapping], the SDVO device with slave addr 72 is found on SDVOC port
>[drm:parse_sdvo_device_mapping], SDVO device: dvo=2, addr=72, wiring=0, ddc_pin=29, i2c_pin=5, i2c_speed=32
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_crtc_init], swapping pipes & planes for FBC
>[drm:intel_crtc_init], swapping pipes & planes for FBC
>[drm:intel_no_lvds_dmi_callback], Skipping LVDS initialization for AOpen i915GMm-HFS
>[drm:intel_setup_outputs], probing SDVOB
>[drm:intel_sdvo_debug_write], SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 3C 06 01 01 01 01 00
>[drm:intel_sdvo_get_capabilities], SDVO capabilities:
>  vendor_id: 2
>  device_id: 60
>  device_rev_id: 6
>  sdvo_version_major: 1
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 0
>  sharp_scaling: 0
>  up_scaling: 0
>  down_scaling: 0
>  stall_support: 0
>  output_flags: 1
>[drm:intel_sdvo_debug_write], SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
>[drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_setup_outputs], probing SDVOC
>[drm:intel_sdvo_debug_write], SDVOC: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C2 01 01 01 3D 3E 00
>[drm:intel_sdvo_get_capabilities], SDVO capabilities:
>  vendor_id: 2
>  device_id: 194
>  device_rev_id: 1
>  sdvo_version_major: 1
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 1
>  sharp_scaling: 1
>  up_scaling: 1
>  down_scaling: 1
>  stall_support: 0
>  output_flags: 62
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 27                         (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
>[drm:intel_sdvo_debug_write], SDVOC: W: 84                         (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
>[drm:intel_sdvo_debug_write], SDVOC: W: 61                         (SDVO_CMD_GET_MAX_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 62                         (SDVO_CMD_GET_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 64                         (SDVO_CMD_GET_MAX_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 65                         (SDVO_CMD_GET_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 67                         (SDVO_CMD_GET_MAX_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 68                         (SDVO_CMD_GET_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 6A                         (SDVO_CMD_GET_MAX_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 6B                         (SDVO_CMD_GET_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 55                         (SDVO_CMD_GET_MAX_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 56                         (SDVO_CMD_GET_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
>[drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
>[drm:intel_sdvo_debug_write], SDVOC: W: 5E                         (SDVO_CMD_GET_MAX_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5F                         (SDVO_CMD_GET_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 58                         (SDVO_CMD_GET_MAX_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 59                         (SDVO_CMD_GET_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 6D                         (SDVO_CMD_GET_MAX_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 6E                         (SDVO_CMD_GET_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
>[drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
>[drm:intel_sdvo_debug_write], SDVOC: W: 5B                         (SDVO_CMD_GET_MAX_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5C                         (SDVO_CMD_GET_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
>[drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
>[drm:intel_sdvo_debug_write], SDVOC: W: 7B                         (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 50                         (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
>[drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
>[drm:intel_sdvo_debug_write], SDVOC: W: 74                         (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 75                         (SDVO_CMD_GET_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
>[drm:intel_sdvo_debug_write], SDVOC: W: 77                         (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: 
>Refined TSC clocksource calibration: 1995.764 MHz.
>Switching to clocksource tsc
>(Success) 02 00 00 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 78                         (SDVO_CMD_GET_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 0, current 0
>[drm:intel_sdvo_debug_write], SDVOC: W: 70                         (SDVO_CMD_GET_DOT_CRAWL)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 04 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 27                         (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
>[drm:intel_sdvo_debug_write], SDVOC: W: 84                         (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
>[drm:intel_sdvo_debug_write], SDVOC: W: 61                         (SDVO_CMD_GET_MAX_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 62                         (SDVO_CMD_GET_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 64                         (SDVO_CMD_GET_MAX_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 65                         (SDVO_CMD_GET_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 67                         (SDVO_CMD_GET_MAX_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 68                         (SDVO_CMD_GET_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 6A                         (SDVO_CMD_GET_MAX_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 6B                         (SDVO_CMD_GET_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 55                         (SDVO_CMD_GET_MAX_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 56                         (SDVO_CMD_GET_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
>[drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
>[drm:intel_sdvo_debug_write], SDVOC: W: 5E                         (SDVO_CMD_GET_MAX_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5F                         (SDVO_CMD_GET_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 58                         (SDVO_CMD_GET_MAX_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 59                         (SDVO_CMD_GET_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 6D                         (SDVO_CMD_GET_MAX_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 6E                         (SDVO_CMD_GET_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
>[drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
>[drm:intel_sdvo_debug_write], SDVOC: W: 5B                         (SDVO_CMD_GET_MAX_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5C                         (SDVO_CMD_GET_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
>[drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
>[drm:intel_sdvo_debug_write], SDVOC: W: 7B                         (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 50                         (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
>[drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
>[drm:intel_sdvo_debug_write], SDVOC: W: 74                         (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 75                         (SDVO_CMD_GET_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
>[drm:intel_sdvo_debug_write], SDVOC: W: 77                         (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 00 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 78                         (SDVO_CMD_GET_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 0, current 0
>[drm:intel_sdvo_debug_write], SDVOC: W: 70                         (SDVO_CMD_GET_DOT_CRAWL)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
>[drm:intel_sdvo_debug_write], SDVOC: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) C4 09 D8 40
>[drm:intel_sdvo_init], SDVOC device VID/DID: 02:C2.01, clock range 25MHz - 166MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_panel_get_backlight], get backlight PWM = 31250
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm] initialized overlay support
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
>[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
>[drm:i9xx_update_wm], memory self refresh disabled
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>[drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>[drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
>[drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
>[drm:i9xx_update_wm], memory self refresh disabled
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [8]
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 64:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 62:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 61:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 63:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 60:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [4]
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 69:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 67:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 66:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 68:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 65:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:45:SVIDEO-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:45:SVIDEO-3] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 73:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 70:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 72:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 71:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 8 enabled? no
>[drm:drm_enable_connectors], connector 10 enabled? yes
>[drm:drm_enable_connectors], connector 27 enabled? yes
>[drm:drm_enable_connectors], connector 44 enabled? no
>[drm:drm_enable_connectors], connector 45 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 10
>[drm:drm_target_preferred], looking for preferred mode on connector 10
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_target_preferred], looking for cmdline mode on connector 27
>[drm:drm_target_preferred], looking for preferred mode on connector 27
>[drm:drm_target_preferred], found mode 1024x768
>[drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
>[drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo f5898480
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:10:SVIDEO-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>fbcon_init: detected unhandled fb_set_par error, error code -22
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:10:SVIDEO-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 75:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:27:SVIDEO-2] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 75:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:10:SVIDEO-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 75:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:27:SVIDEO-2] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 75:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:4]
>Console: switching to colour frame buffer device 128x48
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:10:SVIDEO-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:76] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 75:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:27:SVIDEO-2] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 75:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 1C 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Invalid arg)... failed
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:4]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>sata_sil24 0000:04:00.0: version 1.1
>sata_sil24 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>sata_sil24 0000:04:00.0: setting latency timer to 64
>scsi0 : sata_sil24
>scsi1 : sata_sil24
>ata1: SATA max UDMA/100 host m128@0xd0284000 port 0xd0280000 irq 19
>ata2: SATA max UDMA/100 host m128@0xd0284000 port 0xd0282000 irq 19
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>ata4: port disabled. ignoring.
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe900 irq 19
>ata6: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xe908 irq 19
>sky2: driver version 1.28
>sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sky2 0000:02:00.0: setting latency timer to 64
>sky2 0000:02:00.0: Yukon-2 EC chip revision 1
>sky2 0000:02:00.0: eth0: addr 00:01:80:5f:c7:61
>sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>sky2 0000:03:00.0: setting latency timer to 64
>sky2 0000:03:00.0: Yukon-2 EC chip revision 1
>sky2 0000:03:00.0: eth1: addr 00:01:80:5f:c7:62
>i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>EDAC MC: Ver: 2.1.0 Apr 27 2011
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>Using IPI Shortcut mode
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>ata3.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100
>ata3.00: 586072368 sectors, multi 16: LBA48 
>ata3.01: ATAPI: SONY DVD RW DW-Q58A, UYS3, max UDMA/33
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/33
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>ata1.00: ATA-8: WDC WD3000BLFS-60YBU0, 04.04V02, max UDMA/100
>ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3000BLFS-6 04.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sda: p1 size 1172134467 extends beyond EOD, enabling native capacity
> sda: sda1
>sda: p1 size 1172134467 extends beyond EOD, truncated
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>ata2.00: ATA-8: WDC WD3000BLFS-60YBU0, 04.04V02, max UDMA/100
>ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD3000BLFS-6 04.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD300LD  WK10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:1:0: CD-ROM            SONY     DVD RW DW-Q58A   UYS3 PQ: 0 ANSI: 5
> sdb: unknown partition table
>sd 1:0:0:0: [sdb] Attached SCSI disk
> sdc: sdc1 sdc2 < sdc5 >
>sd 2:0:0:0: [sdc] Attached SCSI disk
>VFS: Mounted root (ext2 filesystem) readonly on device 8:37.
>Freeing unused kernel memory: 356k freed
>udevd (1124): /proc/1124/oom_adj is deprecated, please use /proc/1124/oom_score_adj instead.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>usbcore: registered new interface driver usbfs
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>uhci_hcd: USB Universal Host Controller Interface driver
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
>intel_rng: FWH not detected
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>hub 1-0:1.0: USB hub found
>sr 2:0:1:0: Attached scsi CD-ROM sr0
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>rtc_cmos 00:03: RTC can wake from S4
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>hub 2-0:1.0: USB hub found
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>hub 2-0:1.0: 8 ports detected
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>ACPI: Fan [FAN] (on)
>ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points
>ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points
>ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (89 C)
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>ACPI: acpi_idle registered with cpuidle
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>sr 2:0:1:0: Attached scsi generic sg3 type 5
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
>hub 4-0:1.0: USB hub found
>firewire_ohci 0000:05:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>Linux video capture interface: v2.00
>firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>saa7130/34: v4l2 driver version 0.2.16 loaded
>saa7134 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>saa7133[0]: found at 0000:05:04.0, rev: 209, irq: 16, latency: 32, mmio: 0xd0301000
>saa7133[0]: subsystem: 1461:2c00, board: AVerMedia TV Hybrid A16AR [card=99,insmod option]
>IR NEC protocol handler initialized
>saa7133[0]: board init: gpio is 0
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>IR RC5(x) protocol handler initialized
>Registered IR keymap rc-avermedia
>input: saa7134 IR (AVerMedia TV Hybrid as /devices/pci0000:00/0000:00:1e.0/0000:05:04.0/rc/rc0/input4
>rc0: saa7134 IR (AVerMedia TV Hybrid as /devices/pci0000:00/0000:00:1e.0/0000:05:04.0/rc/rc0
>USB Serial support registered for GSM modem (1-port)
>usbcore: registered new interface driver option
>option: v0.7.2:USB Driver for GSM modems
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: 
>IR RC6 protocol handler initialized
>(Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3
>firewire_core: created device fw0: GUID 00018013945fc761, S400
>saa7133[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00
>saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff
>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>IR JVC protocol handler initialized
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>IR Sony protocol handler initialized
>i2c-core: driver [tuner] using legacy suspend method
>i2c-core: driver [tuner] using legacy resume method
>[drm:i915_driver_irq_handler], pipe A underrun
>Error: Driver 'pcspkr' is already registered, aborting...
>lirc_dev: IR Remote Control driver registered, major 251 
>IR LIRC bridge handler initialized
>tea5767 12-0060: type set to Philips TEA5767HN FM Radio
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
>tuner 12-0060: Tuner 62 found with type(s) Radio.
>tda9887 12-0043: creating new instance
>tda9887 12-0043: tda988[5/6/7] found
>tuner 12-0043: Tuner 74 found with type(s) Radio TV.
>tea5767 12-0060: type set to Philips TEA5767HN FM Radio
>saa7133[0]: registered device video0 [v4l2]
>saa7133[0]: registered device vbi0
>saa7133[0]: registered device radio0
>saa7134 0000:05:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>saa7134[1]: found at 0000:05:05.0, rev: 1, irq: 17, latency: 32, mmio: 0xd0302000
>saa7134[1]: subsystem: 1461:2c00, board: AVerMedia TV Hybrid A16AR [card=99,insmod option]
>saa7134[1]: board init: gpio is 2ba00
>Registered IR keymap rc-avermedia
>input: saa7134 IR (AVerMedia TV Hybrid as /devices/pci0000:00/0000:00:1e.0/0000:05:05.0/rc/rc1/input6
>rc1: saa7134 IR (AVerMedia TV Hybrid as /devices/pci0000:00/0000:00:1e.0/0000:05:05.0/rc/rc1
>saa7134[1]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00
>saa7134[1]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff
>saa7134[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[1]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>tea5767 13-0060: type set to Philips TEA5767HN FM Radio
>tuner 13-0060: Tuner 62 found with type(s) Radio.
>tda9887 13-0043: creating new instance
>tda9887 13-0043: tda988[5/6/7] found
>tuner 13-0043: Tuner 74 found with type(s) Radio TV.
>tea5767 13-0060: type set to Philips TEA5767HN FM Radio
>saa7134[1]: registered device video1 [v4l2]
>saa7134[1]: registered device vbi1
>saa7134[1]: registered device radio1
>dvb_init() allocating 1 frontend
>saa7134 ALSA driver for DMA sound loaded
>saa7133[0]/alsa: saa7133[0] at 0xd0301000 irq 16 registered as card -1
>saa7134[1]/alsa: saa7134[1] at 0xd0302000 irq 17 registered as card -1
>tuner-simple 12-0061: unable to probe Philips TD1316 Hybrid Tuner, proceeding anyway.
>tuner-simple 12-0061: creating new instance
>tuner-simple 12-0061: type set to 67 (Philips TD1316 Hybrid Tuner)
>DVB: registering new adapter (saa7133[0])
>DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
>dvb_init() allocating 1 frontend
>tuner-simple 13-0061: unable to probe Philips TD1316 Hybrid Tuner, proceeding anyway.
>tuner-simple 13-0061: creating new instance
>tuner-simple 13-0061: type set to 67 (Philips TD1316 Hybrid Tuner)
>DVB: registering new adapter (saa7134[1])
>DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)...
>Non-volatile memory driver v1.3
>w83627hf: w83627hf: Found W83627THF chip at 0x290
>w83627hf w83627hf.656: GPIO5 disabled, no VID function
>loop: module loaded
>Marking TSC unstable due to cpufreq changes
>Switching to clocksource hpet
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3
>padlock_aes: VIA PadLock not detected.
>padlock_sha: VIA PadLock Hash Engine not detected.
>fuse init (API version 7.16)
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-2): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (dm-2): using internal journal
>EXT3-fs (dm-2): mounted filesystem with writeback data mode
>Adding 2097148k swap on /var/swap/swapfile.  Priority:-1 extents:3835 across:14266552k 
>IPv4 FIB: Using LC-trie version 0.409
>NET: Registered protocol family 10
>Bridge firewalling registered
>device eth0 entered promiscuous mode
>device eth1 entered promiscuous mode
>sky2 0000:02:00.0: eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 0000:03:00.0: eth1: enabling interface
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): br0: link is not ready
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3
>sky2 0000:03:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>br0: port 2(eth1) entering forwarding state
>br0: port 2(eth1) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
>nf_conntrack version 0.5.0 (15785 buckets, 63140 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3
>eth1: no IPv6 routers present
>br0: no IPv6 routers present
>br0: port 2(eth1) entering forwarding state
>Netfilter messages via NETLINK v0.30.
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3
>input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_detect], SDVO response 1 0 [1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:output_poll_execute], [CONNECTOR:8:DVI-D-1] status updated from 3 to 3
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 1C 00
>[drm:intel_sdvo_detect], SDVO response 28 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:45:SVIDEO-3] status updated from 3 to 3

Actions: View

Attachments on bug 36246: 45634 | 45635 | 45715 | 45724 | 45743 | 45744 | 45745 | 45829 | 45830 | 46037 | 46103

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.