Attachment 48942 Details for Bug 39120 – dmesg

[patch] dmesg

dmesg (text/plain), 30.14 KB, created by tesoro302 on 2011-07-10 14:01:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: tesoro302

Created: 2011-07-10 14:01:45 UTC

Size: 30.14 KB

patch

obsolete

>d, 2372k data, 488k init)
>Preemptable hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:384
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3716.276 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 7432.55 BogoMIPS (lpj=3716276)
>pid_max: default: 32768 minimum: 501
>Mount-cache hash table entries: 256
>tseg: 00cff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using C1E aware idle routine
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20110112
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X4 980 Processor stepping 03
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>System has AMD C1E enabled
>Switch to broadcast mode on CPU0
>MCE: In-kernel MCE decoding enabled.
>Booting Node   0, Processors  #1
>Switch to broadcast mode on CPU1
> #2
>Switch to broadcast mode on CPU2
> #3 Ok.
>Switch to broadcast mode on CPU3
>Brought up 4 CPUs
>Total of 4 processors activated (29731.02 BogoMIPS).
>NET: Registered protocol family 16
>node 0 link 0: io port [9000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
>TOM2: 0000000230000000 aka 8960M
>bus: [00, 06] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
>bus: 00 index 3 [mem 0xe0700000-0xffffffff]
>bus: 00 index 4 [mem 0xe0100000-0xe06fffff]
>bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
>Extended Config Space enabled on 1 nodes
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>PCI: Using configuration type 1 for extended access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110112/tbutils-314)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
>pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
>pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
>pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
>pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
>pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
>pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
>pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
>pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
>pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
>pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
>pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
>pci 0000:00:15.0: supports D1 D2
>pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
>pci 0000:00:15.1: supports D1 D2
>pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
>pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
>pci 0000:00:16.2: supports D1 D2
>pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:16.2: PME# disabled
>pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
>pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
>pci 0000:01:05.0: [1002:9715] type 0 class 0x000300
>pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:01:05.0: reg 14: [io  0xee00-0xeeff]
>pci 0000:01:05.0: reg 18: [mem 0xfdbe0000-0xfdbeffff]
>pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
>pci 0000:01:05.1: reg 10: [mem 0xfdbfc000-0xfdbfffff]
>pci 0000:01:05.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdbfffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
>pci 0000:02:00.0: reg 10: [mem 0xfd5f8000-0xfd5fffff 64bit]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:09.0: PCI bridge to [bus 02-02]
>pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:09.0:   bridge window [mem 0xfd500000-0xfd5fffff]
>pci 0000:00:09.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
>pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:03:00.0: reg 10: [io  0xce00-0xceff]
>pci 0000:03:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
>pci 0000:03:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:0a.0: PCI bridge to [bus 03-03]
>pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:04:06.0: [168c:0013] type 0 class 0x000200
>pci 0000:04:06.0: reg 10: [mem 0xfddf0000-0xfddfffff]
>pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
>pci 0000:00:15.0: PCI bridge to [bus 05-05]
>pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
>pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
>pci 0000:00:15.1: PCI bridge to [bus 06-06]
>pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:15.1:   bridge window [mem 0xfd700000-0xfd7fffff]
>pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x15)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>reserve RAM buffer: 000000000009a000 - 000000000009ffff 
>reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff 
>cfg80211: Calling CRDA to update world regulatory domain
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0xd0000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0220-0x0225]
>pnp 00:01: [io  0x0290-0x0294]
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x4100-0x411f]
>pnp 00:02: [io  0x0228-0x022f]
>pnp 00:02: [io  0x040b]
>pnp 00:02: [io  0x04d6]
>pnp 00:02: [io  0x0c00-0x0c01]
>pnp 00:02: [io  0x0c14]
>pnp 00:02: [io  0x0c50-0x0c52]
>pnp 00:02: [io  0x0c6c-0x0c6d]
>pnp 00:02: [io  0x0c6f]
>pnp 00:02: [io  0x0cd0-0x0cd1]
>pnp 00:02: [io  0x0cd2-0x0cd3]
>pnp 00:02: [io  0x0cd4-0x0cdf]
>pnp 00:02: [io  0x4000-0x40fe]
>pnp 00:02: [io  0x4210-0x4217]
>pnp 00:02: [io  0x0b00-0x0b0f]
>pnp 00:02: [io  0x0b10-0x0b1f]
>pnp 00:02: [io  0x0b20-0x0b3f]
>pnp 00:02: [mem 0x00000000-0x00000fff window]
>pnp 00:02: [mem 0xfee00400-0xfee00fff window]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>system 00:02: [io  0x4100-0x411f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x4000-0x40fe] has been reserved
>system 00:02: [io  0x4210-0x4217] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [io  0x0070-0x0073]
>pnp 00:04: [irq 8]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x00f0-0x00ff]
>pnp 00:06: [irq 13]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: [io  0x03f0-0x03f5]
>pnp 00:07: [io  0x03f7]
>pnp 00:07: [irq 6]
>pnp 00:07: [dma 2]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:08: [mem 0xe0000000-0xefffffff]
>system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [mem 0x000d4200-0x000d7fff]
>pnp 00:09: [mem 0x000f0000-0x000f7fff]
>pnp 00:09: [mem 0x000f8000-0x000fbfff]
>pnp 00:09: [mem 0x000fc000-0x000fffff]
>pnp 00:09: [mem 0xcfdf0000-0xcfdfffff]
>pnp 00:09: [mem 0xffff0000-0xffffffff]
>pnp 00:09: [mem 0x00000000-0x0009ffff]
>pnp 00:09: [mem 0x00100000-0xcfdeffff]
>pnp 00:09: [mem 0xcfe00000-0xcfefffff]
>pnp 00:09: [mem 0xcff00000-0xcfffffff]
>pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:09: [mem 0xfec00000-0xfec00fff]
>pnp 00:09: [mem 0xfee00000-0xfee00fff]
>pnp 00:09: [mem 0xfff80000-0xfffeffff]
>pnp 00:09: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:09: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>system 00:09: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
>system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved
>system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved
>system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
>system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdbfffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:09.0: PCI bridge to [bus 02-02]
>pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:09.0:   bridge window [mem 0xfd500000-0xfd5fffff]
>pci 0000:00:09.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
>pci 0000:00:0a.0: PCI bridge to [bus 03-03]
>pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 04-04]
>pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
>pci 0000:00:15.0: PCI bridge to [bus 05-05]
>pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
>pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
>pci 0000:00:15.1: PCI bridge to [bus 06-06]
>pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:15.1:   bridge window [mem 0xfd700000-0xfd7fffff]
>pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
>pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:09.0: setting latency timer to 64
>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:0a.0: setting latency timer to 64
>pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:15.0: setting latency timer to 64
>pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:15.1: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfd5fffff]
>pci_bus 0000:02: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
>pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
>pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:01:05.0: Boot video device
>PCI: CLS 4 bytes, default 64
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c4000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>audit: initializing netlink socket (disabled)
>type=2000 audit(1310303428.377:1): initialized
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>msgmni has been set to 14972
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:09.0: setting latency timer to 64
>pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:0a.0: setting latency timer to 64
>pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>ACPI: processor limited to max C-state 1
>Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
>Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using getrawmonotonic().
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to userspace modesetting.
>pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:01:05.0: setting latency timer to 64
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
>loop: module loaded
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 19
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 19
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 19
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 19
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:03:00.0: setting latency timer to 64
>r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
>r8169 0000:03:00.0: irq 42 for MSI/MSI-X
>r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc90000024000, 50:e5:49:39:8b:b7, XID 0c900800 IRQ 42
>ath5k 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ath5k 0000:04:06.0: registered as 'phy0'
>ata4: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2.00: ATAPI: HL-DT-ST BD-RE  GGW-H20L, YL05, max UDMA/133
>ata2.00: configured for UDMA/133
>ata1.00: ATA-8: WDC WD2001FASS-00W2B0, 01.00101, max UDMA/133
>ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2001FASS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST BD-RE  GGW-H20L  YL05 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ath: EEPROM regdomain: 0x0
>ath: EEPROM indicates default country code should be used
>ath: doing EEPROM country->regdmn map search
>ath: country maps to regdmn code: 0x3a
>ath: Country alpha2 being used: US
>ath: Regpair used: 0x3a
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
>ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
>ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 5 ports detected
>ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:16.2: EHCI Host Controller
>ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
>ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:16.2: debug port 1
>ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
>ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:16.0: OHCI Host Controller
>ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
>ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 4 ports detected
>xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>xhci_hcd 0000:02:00.0: setting latency timer to 64
>xhci_hcd 0000:02:00.0: xHCI Host Controller
>xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
>xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd5f8000
>xhci_hcd 0000:02:00.0: Failed to enable MSI-X
>xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
>usb usb8: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 4 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
>i8042: If AUX port is really absent please use the 'i8042.noaux' option
>Refined TSC clocksource calibration: 3716.424 MHz.
>Switching to clocksource tsc
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>i2c /dev entries driver
>it87: Found IT8720F chip at 0x228, revision 8
>it87: Routing internal VCCH to in7
>it87: Beeping is supported
>EDAC MC: Ver: 2.1.0 Jul  9 2011
>EDAC amd64_edac: v3.3.0
>EDAC amd64: DRAM ECC disabled.
>EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> (Note that use of the override may cause unknown side effects.)
>cpuidle: using governor ladder
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>usbcore: registered new interface driver snd-usb-audio
>ALSA device list:
>  No soundcards found.
>[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
>[Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
>[Firmware Bug]: using offset 1 for IBS interrupts
>[Firmware Bug]: workaround enabled for IBS LVT offset
>oprofile: AMD IBS detected (0x0000001f)
>oprofile: using NMI interrupt.
>GACT probability on
>Mirror/redirect action on
>netem: version 1.2
>u32 classifier
>    Performance counters on
>    Actions configured
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>xt_time: kernel timezone is -0000
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>registered taskstats version 1
>rtc_cmos 00:04: setting system clock to 2011-07-10 13:10:30 UTC (1310303430)
>usb 4-1: new full speed USB device using ohci_hcd and address 2
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda2): mounted filesystem with ordered data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 488k freed
>2:1:1: cannot get freq at ep 0x1
>usb 4-5: new low speed USB device using ohci_hcd and address 3
>input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
>generic-usb 0003:17EF:6014.0001: input: USB HID v1.11 Keyboard [Lenovo Mini Wireless Keyboard] on usb-0000:00:12.0-5/input0
>input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3
>generic-usb 0003:17EF:6014.0002: input: USB HID v1.11 Mouse [Lenovo Mini Wireless Keyboard] on usb-0000:00:12.0-5/input1
>udev[877]: starting version 164
>udev[891]: renamed network interface eth0 to eth1
>EXT3-fs (sda2): using internal journal
>wlan0: authenticate with 00:21:91:12:dd:a5 (try 1)
>wlan0: authenticated
>wlan0: associate with 00:21:91:12:dd:a5 (try 1)
>wlan0: RX AssocResp from 00:21:91:12:dd:a5 (capab=0x431 status=0 aid=1)
>wlan0: associated
>[drm] Setting GART location based on new memory map
>[drm] Loading RS780 CP Microcode
>[drm] Resetting GPU
>[drm] writeback test succeeded in 1 usecs
>2:1:1: cannot get freq at ep 0x1

Actions: View | Splinter Review

Attachments on bug 39120: 48940 | 48941 | 48942 | 48947 | 48982 | 48983 | 48984

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.