Attachment 49113 Details for Bug 39216 – after done testdisplay info with patch

after done testdisplay info with patch

aftertestdisplay.txt (text/plain), 86.49 KB, created by bo.b.wang on 2011-07-14 19:03:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: bo.b.wang

Created: 2011-07-14 19:03:43 UTC

Size: 86.49 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.0.0-rc7_sdvo_patch_20110714+ (root@x-pk1) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Thu Jul 14 16:57:11 CST 2011
>Command line: ro root=UUID=1646c12b-0a72-4dc0-a52d-898259db5f13 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet  fbcon=rotate:0 drm.debug=0xe
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cdd80000 (usable)
> BIOS-e820: 00000000cdd80000 - 00000000cdd8e000 (ACPI data)
> BIOS-e820: 00000000cdd8e000 - 00000000cddd0000 (ACPI NVS)
> BIOS-e820: 00000000cddd0000 - 00000000cde00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI present.
>DMI: System manufacturer P5Q-EM/P5Q-EM, BIOS 0302    08/08/2008
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-DFFFF write-protect
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 100000000 mask FE0000000 write-back
>  2 base 120000000 mask FF0000000 write-back
>  3 base 0D0000000 mask FF0000000 uncachable
>  4 base 0E0000000 mask FE0000000 uncachable
>  5 base 0CDE00000 mask FFFE00000 uncachable
>  6 base 0CE000000 mask FFE000000 uncachable
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000cde00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcdd80 max_arch_pfn = 0x400000000
>found SMP MP-table at [ffff8800000ff780] ff780
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff88000009a000] 9a000 size 20480
>init_memory_mapping: 0000000000000000-00000000cdd80000
> 0000000000 - 00cdc00000 page 2M
> 00cdc00000 - 00cdd80000 page 4k
>kernel direct mapping tables up to cdd80000 @ cdd7a000-cdd80000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
>RAMDISK: 37b2c000 - 37ff0000
>ACPI: RSDP 00000000000fba20 00014 (v00 ACPIAM)
>ACPI: RSDT 00000000cdd80000 00044 (v01 A_M_I_ OEMRSDT  08000808 MSFT 00000097)
>ACPI: FACP 00000000cdd80200 00084 (v02 A_M_I_ OEMFACP  08000808 MSFT 00000097)
>ACPI: DSDT 00000000cdd80440 090CE (v01  A0982 A0982045 00000045 INTL 20060113)
>ACPI: FACS 00000000cdd8e000 00040
>ACPI: APIC 00000000cdd80390 0006C (v01 A_M_I_ OEMAPIC  08000808 MSFT 00000097)
>ACPI: MCFG 00000000cdd80400 0003C (v01 A_M_I_ OEMMCFG  08000808 MSFT 00000097)
>ACPI: OEMB 00000000cdd8e040 00089 (v01 A_M_I_ AMI_OEM  08000808 MSFT 00000097)
>ACPI: HPET 00000000cdd89510 00038 (v01 A_M_I_ OEMHPET  08000808 MSFT 00000097)
>ACPI: GSCI 00000000cdd8e0d0 02024 (v01 A_M_I_ GMCHSCI  08000808 MSFT 00000097)
>ACPI: OSFR 00000000cdd89550 000B0 (v01 A_M_I_ OEMOSFR  08000808 MSFT 00000097)
>ACPI: SSDT 00000000cdd90b50 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Initmem setup node 0 0000000000000000-0000000130000000
>  NODE_DATA [000000012fffb000 - 000000012fffffff]
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000cdd80
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1039631
>  DMA zone: 56 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3922 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 824760 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000cdd80000 - 00000000cdd8e000
>PM: Registered nosave memory: 00000000cdd8e000 - 00000000cddd0000
>PM: Registered nosave memory: 00000000cddd0000 - 00000000cde00000
>PM: Registered nosave memory: 00000000cde00000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at cde00000 (gap: cde00000:31000000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 25 pages/cpu @ffff88012fc00000 s69824 r8192 d24384 u524288
>pcpu-alloc: s69824 r8192 d24384 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1022602
>Policy zone: Normal
>Kernel command line: ro root=UUID=1646c12b-0a72-4dc0-a52d-898259db5f13 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet  fbcon=rotate:0 drm.debug=0xe
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 4019028k/4980736k available (3852k kernel code, 822212k absent, 139496k reserved, 3277k data, 612k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:2304
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3166.389 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6332.77 BogoMIPS (lpj=3166389)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20110413
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E8500  @ 3.16GHz stepping 0a
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 9a000
>Brought up 2 CPUs
>Total of 2 processors activated (12665.12 BogoMIPS).
>PM: Registering ACPI NVS region at cdd8e000 (270336 bytes)
>Time: 23:02:33  Date: 01/16/02
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT 00000000cdd90100 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
>ACPI: SSDT 00000000cdd90600 004B2 (v01  PmRef  P001Cst 00003001 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 004B2 (v01  PmRef  P001Cst 00003001 INTL 20060113)
>ACPI: SSDT 00000000cdd90380 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
>ACPI: SSDT 00000000cdd90ac0 00085 (v01  PmRef  P002Cst 00003000 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00085 (v01  PmRef  P002Cst 00003000 INTL 20060113)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0xcde00000-0xdfffffff]
>pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
>pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
>pci 0000:00:02.0: [8086:2e22] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xcc00-0xcc07]
>pci 0000:00:02.1: [8086:2e23] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
>pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 20: [io  0xc480-0xc49f]
>pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
>pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
>pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
>pci 0000:00:1a.2: reg 20: [io  0xc880-0xc89f]
>pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
>pci 0000:00:1a.7: reg 10: [mem 0xfe3fbc00-0xfe3fbfff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xfe3f4000-0xfe3f7fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0xc000-0xc01f]
>pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
>pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0xc400-0xc41f]
>pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xfe3fb800-0xfe3fbbff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
>pci 0000:00:1f.2: reg 10: [io  0xac00-0xac07]
>pci 0000:00:1f.2: reg 14: [io  0xa880-0xa883]
>pci 0000:00:1f.2: reg 18: [io  0xa800-0xa807]
>pci 0000:00:1f.2: reg 1c: [io  0xa480-0xa483]
>pci 0000:00:1f.2: reg 20: [io  0xa400-0xa40f]
>pci 0000:00:1f.2: reg 24: [io  0xa080-0xa08f]
>pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xfe3fb400-0xfe3fb4ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
>pci 0000:00:1f.5: reg 10: [io  0xbc00-0xbc07]
>pci 0000:00:1f.5: reg 14: [io  0xb880-0xb883]
>pci 0000:00:1f.5: reg 18: [io  0xb800-0xb807]
>pci 0000:00:1f.5: reg 1c: [io  0xb480-0xb483]
>pci 0000:00:1f.5: reg 20: [io  0xb400-0xb40f]
>pci 0000:00:1f.5: reg 24: [io  0xb080-0xb08f]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:02:00.0: [11ab:6101] type 0 class 0x000101
>pci 0000:02:00.0: reg 10: [io  0xec00-0xec07]
>pci 0000:02:00.0: reg 14: [io  0xe880-0xe883]
>pci 0000:02:00.0: reg 18: [io  0xe800-0xe807]
>pci 0000:02:00.0: reg 1c: [io  0xe480-0xe483]
>pci 0000:02:00.0: reg 20: [io  0xe400-0xe40f]
>pci 0000:02:00.0: reg 24: [mem 0xfeaffc00-0xfeaffdff]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: PME# supported from D0 D1 D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:01:00.0: reg 10: [io  0xd800-0xd8ff]
>pci 0000:01:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit]
>pci 0000:01:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref]
>pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 01-01]
>pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:04:03.0: [11c1:5811] type 0 class 0x000c00
>pci 0000:04:03.0: reg 10: [mem 0xfebff000-0xfebfffff]
>pci 0000:04:03.0: supports D1 D2
>pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:04:03.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xcde00000-0xdfffffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 00000000cdd80000 - 00000000cfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0xcde00000-0xdfffffff window]
>pnp 00:00: [mem 0xf0000000-0xffffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed14000-0xfed19fff]
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0081-0x0083]
>pnp 00:02: [io  0x0087]
>pnp 00:02: [io  0x0089-0x008b]
>pnp 00:02: [io  0x008f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x00f0-0x00ff]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x03f0-0x03f5]
>pnp 00:06: [io  0x03f7]
>pnp 00:06: [irq 6]
>pnp 00:06: [dma 2]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:07: [io  0x0290-0x029f]
>system 00:07: [io  0x0290-0x029f] has been reserved
>system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [io  0x0010-0x001f]
>pnp 00:08: [io  0x0022-0x003f]
>pnp 00:08: [io  0x0044-0x004d]
>pnp 00:08: [io  0x0050-0x005f]
>pnp 00:08: [io  0x0062-0x0063]
>pnp 00:08: [io  0x0065-0x006f]
>pnp 00:08: [io  0x0072-0x007f]
>pnp 00:08: [io  0x0080]
>pnp 00:08: [io  0x0084-0x0086]
>pnp 00:08: [io  0x0088]
>pnp 00:08: [io  0x008c-0x008e]
>pnp 00:08: [io  0x0090-0x009f]
>pnp 00:08: [io  0x00a2-0x00bf]
>pnp 00:08: [io  0x00e0-0x00ef]
>pnp 00:08: [io  0x04d0-0x04d1]
>pnp 00:08: [io  0x0800-0x087f]
>pnp 00:08: [io  0x0400-0x03ff disabled]
>pnp 00:08: [io  0x0500-0x057f]
>pnp 00:08: [mem 0xfed08000-0xfed08fff]
>pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:08: [mem 0xfed20000-0xfed3ffff]
>pnp 00:08: [mem 0xfed50000-0xfed8ffff]
>system 00:08: [io  0x04d0-0x04d1] has been reserved
>system 00:08: [io  0x0800-0x087f] has been reserved
>system 00:08: [io  0x0500-0x057f] has been reserved
>system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
>system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [mem 0xfed00000-0xfed003ff]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0a: [mem 0xffb00000-0xffbfffff]
>pnp 00:0a: [mem 0xfff00000-0xffffffff]
>pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:0b: [mem 0xffc00000-0xffefffff]
>system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [io  0x03f8-0x03ff]
>pnp 00:0c: [irq 4]
>pnp 00:0c: [dma 0 disabled]
>pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:0d: [io  0x0060]
>pnp 00:0d: [io  0x0064]
>pnp 00:0d: [mem 0xfec00000-0xfec00fff]
>pnp 00:0d: [mem 0xfee00000-0xfee00fff]
>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0xe0000000-0xefffffff]
>system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0f: [mem 0x00000000-0x0009ffff]
>pnp 00:0f: [mem 0x000c0000-0x000cffff]
>pnp 00:0f: [mem 0x000e0000-0x000fffff]
>pnp 00:0f: [mem 0x00100000-0xcddfffff]
>pnp 00:0f: [mem 0xe0000000-0xffffffff]
>system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0f: [mem 0x00100000-0xcddfffff] could not be reserved
>system 00:0f: [mem 0xe0000000-0xffffffff] could not be reserved
>system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:1c.4: BAR 9: assigned [mem 0xcde00000-0xcdffffff 64bit pref]
>pci 0000:00:1c.0: BAR 8: assigned [mem 0xce000000-0xce3fffff]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xce3fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.4:   bridge window [mem 0xcde00000-0xcdffffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 01-01]
>pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: enabling device (0106 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xcde00000-0xdfffffff]
>pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
>pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:03: resource 1 [mem 0xce000000-0xce3fffff]
>pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:02: resource 2 [mem 0xcde00000-0xcdffffff 64bit pref]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
>pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:04: resource 8 [mem 0xcde00000-0xdfffffff]
>pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4880k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800c9d7a000 - ffff8800cdd7a000
>software IO TLB at phys 0xc9d7a000 - 0xcdd7a000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1011222152.236:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Btrfs loaded
>msgmni has been set to 7859
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: acpi_idle registered with cpuidle
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 32768K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>brd: module loaded
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
>ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
>ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
>ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 2:572:49
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2.00: SATA link down (SStatus 0 SControl 300)
>ata2.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>Freeing unused kernel memory: 612k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 224k freed
>Freeing unused kernel memory: 208k freed
>dracut: dracut-005-3.fc13
>dracut: rd_NO_LUKS: removing cryptoluks activation
>udev: starting version 153
>udevd (732): /proc/732/oom_adj is deprecated, please use /proc/732/oom_score_adj instead.
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xcdd8e0f4
>[drm:intel_opregion_setup], Public ACPI methods supported
>[drm:intel_opregion_setup], SWSCI supported
>[drm:intel_opregion_setup], ASLE supported
>i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT EAGLELAKE      d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:intel_setup_outputs], probing SDVOB
>[drm:intel_sdvo_debug_write], SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 41 01 01 01 5D 40 00
>[drm:intel_sdvo_get_capabilities], SDVO capabilities:
>  vendor_id: 2
>  device_id: 65
>  device_rev_id: 1
>  sdvo_version_major: 1
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 1
>  sharp_scaling: 1
>  up_scaling: 1
>  down_scaling: 0
>  stall_support: 1
>  output_flags: 64
>[drm:intel_sdvo_debug_write], SDVOB: W: 84                         (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
>[drm:intel_sdvo_create_enhance_property], No enhancement is supported
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
>[drm:intel_sdvo_init], SDVOB device VID/DID: 02:41.01, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: N, output 2: N
>[drm:intel_setup_outputs], probing SDVOC
>[drm:intel_sdvo_debug_write], SDVOC: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C2 02 01 01 3D 3E 00
>[drm:intel_sdvo_get_capabilities], SDVO capabilities:
>  vendor_id: 2
>  device_id: 194
>  device_rev_id: 2
>  sdvo_version_major: 1
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 1
>  sharp_scaling: 1
>  up_scaling: 1
>  down_scaling: 1
>  stall_support: 0
>  output_flags: 62
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 27                         (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
>[drm:intel_sdvo_debug_write], SDVOC: W: 84                         (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
>[drm:intel_sdvo_debug_write], SDVOC: W: 61                         (SDVO_CMD_GET_MAX_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 62                         (SDVO_CMD_GET_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 64                         (SDVO_CMD_GET_MAX_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 65                         (SDVO_CMD_GET_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 67                         (SDVO_CMD_GET_MAX_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 68                         (SDVO_CMD_GET_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 6A                         (SDVO_CMD_GET_MAX_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 6B                         (SDVO_CMD_GET_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 55                         (SDVO_CMD_GET_MAX_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 56                         (SDVO_CMD_GET_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
>[drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
>[drm:intel_sdvo_debug_write], SDVOC: W: 5E                         (SDVO_CMD_GET_MAX_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5F                         (SDVO_CMD_GET_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 58                         (SDVO_CMD_GET_MAX_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 59                         (SDVO_CMD_GET_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 6D                         (SDVO_CMD_GET_MAX_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 6E                         (SDVO_CMD_GET_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
>[drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
>[drm:intel_sdvo_debug_write], SDVOC: W: 5B                         (SDVO_CMD_GET_MAX_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5C                         (SDVO_CMD_GET_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
>[drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
>[drm:intel_sdvo_debug_write], SDVOC: W: 7B                         (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 50                         (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
>[drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
>[drm:intel_sdvo_debug_write], SDVOC: W: 74                         (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 75                         (SDVO_CMD_GET_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
>[drm:intel_sdvo_debug_write], SDVOC: W: 77                         (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 02 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 78                         (SDVO_CMD_GET_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 2, current 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 70                         (SDVO_CMD_GET_DOT_CRAWL)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
>[drm:intel_sdvo_debug_write], SDVOC: W: 11 04 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 27                         (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
>[drm:intel_sdvo_debug_write], SDVOC: W: 84                         (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
>[drm:intel_sdvo_debug_write], SDVOC: W: 61                         (SDVO_CMD_GET_MAX_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 62                         (SDVO_CMD_GET_OVERSCAN_H)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 64                         (SDVO_CMD_GET_MAX_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 65                         (SDVO_CMD_GET_OVERSCAN_V)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>[drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
>[drm:intel_sdvo_debug_write], SDVOC: W: 67                         (SDVO_CMD_GET_MAX_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 68                         (SDVO_CMD_GET_HPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 6A                         (SDVO_CMD_GET_MAX_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>[drm:intel_sdvo_debug_write], SDVOC: W: 6B                         (SDVO_CMD_GET_VPOS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>[drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
>[drm:intel_sdvo_debug_write], SDVOC: W: 55                         (SDVO_CMD_GET_MAX_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 56                         (SDVO_CMD_GET_SATURATION)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
>[drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
>[drm:intel_sdvo_debug_write], SDVOC: W: 5E                         (SDVO_CMD_GET_MAX_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5F                         (SDVO_CMD_GET_CONTRAST)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 58                         (SDVO_CMD_GET_MAX_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 59                         (SDVO_CMD_GET_HUE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>[drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
>[drm:intel_sdvo_debug_write], SDVOC: W: 6D                         (SDVO_CMD_GET_MAX_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 6E                         (SDVO_CMD_GET_SHARPNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
>[drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
>[drm:intel_sdvo_debug_write], SDVOC: W: 5B                         (SDVO_CMD_GET_MAX_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 5C                         (SDVO_CMD_GET_BRIGHTNESS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
>[drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
>[drm:intel_sdvo_debug_write], SDVOC: W: 7B                         (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 50                         (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
>[drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
>[drm:intel_sdvo_debug_write], SDVOC: W: 74                         (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 75                         (SDVO_CMD_GET_TV_CHROMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
>[drm:intel_sdvo_debug_write], SDVOC: W: 77                         (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 02 00
>[drm:intel_sdvo_debug_write], SDVOC: W: 78                         (SDVO_CMD_GET_TV_LUMA_FILTER)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00
>[drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 2, current 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 70                         (SDVO_CMD_GET_DOT_CRAWL)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
>[drm:intel_sdvo_debug_write], SDVOC: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) C4 09 80 3E
>[drm:intel_sdvo_init], SDVOC device VID/DID: 02:C2.02, clock range 25MHz - 160MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_panel_get_backlight], get backlight PWM = 0
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], bsd ring hws offset: 0x00021000
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 40 00
>[drm:intel_sdvo_detect], SDVO response 64 0 [40]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 8 enabled? yes
>[drm:drm_enable_connectors], connector 10 enabled? no
>[drm:drm_enable_connectors], connector 27 enabled? no
>[drm:drm_enable_connectors], connector 44 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 8
>[drm:drm_target_preferred], looking for preferred mode on connector 8
>[drm:drm_target_preferred], found mode 1600x1200
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1600x1200 set on crtc 3
>[drm:intelfb_create], allocated 1600x1200 fb: 0x00042000, bo ffff880129262000
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 40 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 16 48 3F 40 30 62 B0 32 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 17 40 C0 13 00 18 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1A 48 3F 40 06 B0 04 00    (SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1B                         (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 48 3F 40 30 62 B0 32 40
>[drm:intel_sdvo_debug_write], SDVOB: W: 1C                         (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 40 C0 13 00 18 00 00 00
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:i9xx_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[drm:intel_pipe_set_base_atomic], Writing base 00042000 00000000 0 0 6400
>[drm:intel_update_fbc], 
>[drm:g4x_check_srwm], SR watermark: display plane 102, cursor 6
>[drm:g4x_check_srwm], display watermark is too large(102/63), disabling
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=53, cursor=6, B: plane=2, cursor=2, SR: plane=102, cursor=6
>[drm:drm_crtc_helper_set_mode], [ENCODER:7:LVDS-7] set [MODE:47:1600x1200]
>[drm:intel_sdvo_debug_write], SDVOB: W: 07 40 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
>[drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 40 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
>[drm:intel_sdvo_debug_write], SDVOB: W: 14 48 3F 40 30 62 B0 32 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 15 40 C0 13 00 18 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:g4x_check_srwm], SR watermark: display plane 102, cursor 6
>[drm:g4x_check_srwm], display watermark is too large(102/63), disabling
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=53, cursor=6, B: plane=2, cursor=2, SR: plane=102, cursor=6
>[drm:intel_update_fbc], 
>[drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 40 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:8:LVDS-1] set DPMS on
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>Console: switching to colour frame buffer device 200x75
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>No ACPI video bus found
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 40 00
>[drm:intel_sdvo_detect], SDVO response 64 0 [40]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:27:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:27:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:44:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:44:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_mode_addfb], [FB:49]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:49] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:intel_pipe_set_base_atomic], Writing base 00795000 00000000 0 0 6400
>[drm:intel_update_fbc], 
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:49] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>Floppy drive(s): fd0 is 1.44M
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>pata_marvell 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_marvell 0000:02:00.0: setting latency timer to 64
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>scsi4 : pata_marvell
>scsi5 : pata_marvell
>ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
>ata6: DUMMY
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>FDC 0 is a post-1991 82077
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe3fbc00
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ ehci_hcd
>usb usb7: SerialNumber: 0000:00:1a.7
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe3fb800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 3.0.0-rc7_sdvo_patch_20110714+ ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
>EXT3-fs (sda2): recovery required on readonly filesystem
>EXT3-fs (sda2): write access will be enabled during recovery
>usb 4-2: new low speed USB device number 2 using uhci_hcd
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda2): recovery complete
>EXT3-fs (sda2): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/sda2
>usb 4-2: New USB device found, idVendor=045e, idProduct=0750
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: Wired Keyboard 600
>usb 4-2: Manufacturer: Microsoft
>input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input2
>generic-usb 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input0
>firewire_core: created device fw0: GUID 001e8c00018070b3, S400
>input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.1/input/input3
>generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input1
>dracut: Loading SELinux policy
>dracut: /sbin/load_policy: Can't load policy: No such device
>dracut: Switching root
>udev: starting version 153
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>iTCO_vendor_support: vendor-support=0
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:01:00.0: setting latency timer to 64
>r8169 0000:01:00.0: irq 44 for MSI/MSI-X
>r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xffffc900111be000, 00:23:54:01:e8:f5, XID 1c4000c0 IRQ 44
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/patch_realtek.c:1748 SKU: Nid=0x1d sku_cfg=0x4015e601
>ALSA sound/pci/hda/patch_realtek.c:1750 SKU: port_connectivity=0x1
>ALSA sound/pci/hda/patch_realtek.c:1751 SKU: enable_pcbeep=0x1
>ALSA sound/pci/hda/patch_realtek.c:1752 SKU: check_sum=0x00000005
>ALSA sound/pci/hda/patch_realtek.c:1753 SKU: customization=0x000000e6
>ALSA sound/pci/hda/patch_realtek.c:1754 SKU: external_amp=0x0
>ALSA sound/pci/hda/patch_realtek.c:1755 SKU: platform_type=0x0
>ALSA sound/pci/hda/patch_realtek.c:1756 SKU: swap=0x0
>ALSA sound/pci/hda/patch_realtek.c:1757 SKU: override=0x1
>HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
>EXT3-fs (sda2): using internal journal
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): using internal journal
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>Adding 2047996k swap on /dev/sda3.  Priority:-1 extents:1 across:2047996k 
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>r8169 0000:01:00.0: eth0: link down
>r8169 0000:01:00.0: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>r8169 0000:01:00.0: eth0: link up
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:intel_pipe_set_base_atomic], Writing base 00042000 00000000 0 0 6400
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>eth0: no IPv6 routers present
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 40 00
>[drm:intel_sdvo_detect], SDVO response 64 0 [40]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:27:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:27:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:44:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:44:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 40 00
>[drm:intel_sdvo_detect], SDVO response 64 0 [40]
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>[drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:8:?]
>[drm:drm_mode_addfb], [FB:49]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:8:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:49] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:intel_pipe_set_base_atomic], Writing base 00795000 00000000 0 0 6400
>[drm:intel_update_fbc], 
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [8]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:SVIDEO-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:27:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:27:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [4]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:SVIDEO-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:44:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:44:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2]
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:44:VGA-2] disconnected
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [NOCRTC]
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:48] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 40 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 16 48 3F 40 30 62 B0 32 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 17 40 C0 13 00 18 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1A 48 3F 40 06 B0 04 00    (SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 1B                         (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 48 3F 40 30 62 B0 32 40
>[drm:intel_sdvo_debug_write], SDVOB: W: 1C                         (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 40 C0 13 00 18 00 00 00
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:intel_update_fbc], 
>[drm:g4x_check_srwm], SR watermark: display plane 102, cursor 6
>[drm:g4x_check_srwm], display watermark is too large(102/63), disabling
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=53, cursor=6, B: plane=2, cursor=2, SR: plane=102, cursor=6
>[drm:i9xx_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0xa
>[drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[drm:intel_pipe_set_base_atomic], Writing base 00042000 00000000 0 0 6400
>[drm:intel_update_fbc], 
>[drm:g4x_check_srwm], SR watermark: display plane 102, cursor 6
>[drm:g4x_check_srwm], display watermark is too large(102/63), disabling
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=53, cursor=6, B: plane=2, cursor=2, SR: plane=102, cursor=6
>[drm:drm_crtc_helper_set_mode], [ENCODER:7:LVDS-7] set [MODE:47:1600x1200]
>[drm:intel_sdvo_debug_write], SDVOB: W: 07 40 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
>[drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
>[drm:intel_sdvo_debug_write], SDVOB: W: 11 40 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
>[drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
>[drm:intel_sdvo_debug_write], SDVOB: W: 14 48 3F 40 30 62 B0 32 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 15 40 C0 13 00 18 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write], SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:g4x_check_srwm], SR watermark: display plane 102, cursor 6
>[drm:g4x_check_srwm], display watermark is too large(102/63), disabling
>[drm:g4x_update_wm], Setting FIFO watermarks - A: plane=53, cursor=6, B: plane=2, cursor=2, SR: plane=102, cursor=6
>[drm:intel_update_fbc], 
>[drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
>[drm:intel_sdvo_debug_write], SDVOB: W: 05 40 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOB: R: (Success)
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:8:LVDS-1] set DPMS on
>[drm:intel_sdvo_debug_write], SDVOC: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success)
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:8:LVDS-1] to [CRTC:3]
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
>[drm:intel_sdvo_debug_write], SDVOC: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>[drm:intel_sdvo_detect], SDVO response 0 0 [2]
>[drm:output_poll_execute], [CONNECTOR:44:VGA-2] status updated from 2 to 2

Actions: View

Attachments on bug 39216: 49068 | 49069 | 49112 | 49113 | 49114

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.