Attachment 49222 Details for Bug 39314 – Dmesg output with drm.debug=0x06

Dmesg output with drm.debug=0x06

dmesg.txt (text/plain), 41.20 KB, created by Jani Ollikainen on 2011-07-17 14:14:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jani Ollikainen

Created: 2011-07-17 14:14:48 UTC

Size: 41.20 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.34.8-68.fc13.i686 (mockbuild@x86-15.phx2.fedoraproject.org) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #1 SMP Thu Feb 17 15:00:46 UTC 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf780000 (usable)
> BIOS-e820: 00000000cf780000 - 00000000cf78e000 (ACPI data)
> BIOS-e820: 00000000cf78e000 - 00000000cf7e0000 (ACPI NVS)
> BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI 2.4 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0xcf780 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-DFFFF write-protect
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0D0000000 mask FF0000000 uncachable
>  1 base 0E0000000 mask FE0000000 uncachable
>  2 base 000000000 mask F00000000 write-back
>  3 base 100000000 mask FE0000000 write-back
>  4 base 120000000 mask FF0000000 write-back
>  5 base 0CF800000 mask FFF800000 uncachable
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 3328MB, range: 256MB, type UC
>reg 1, base: 3584MB, range: 512MB, type UC
>reg 2, base: 0GB, range: 4GB, type WB
>reg 3, base: 4GB, range: 512MB, type WB
>reg 4, base: 4608MB, range: 256MB, type WB
>reg 5, base: 3320MB, range: 8MB, type UC
>total RAM covered: 4088M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 6  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 256MB, type WB
>reg 3, base: 3320MB, range: 8MB, type UC
>reg 4, base: 4GB, range: 512MB, type WB
>reg 5, base: 4608MB, range: 256MB, type WB
>e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 01000000
>found SMP MP-table at [c00ff780] ff780
>init_memory_mapping: 0000000000000000-00000000373fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 15000-1b000
>RAMDISK: 373c8000 - 37ff0000
>Allocated new RAMDISK: 00b39000 - 01760ac2
>Move RAMDISK from 00000000373c8000 - 0000000037fefac1 to 00b39000 - 01760ac1
>ACPI: RSDP 000fbc70 00024 (v02 ACPIAM)
>ACPI: XSDT cf780100 0005C (v01 A_M_I_ OEMXSDT  07000816 MSFT 00000097)
>ACPI: FACP cf780290 000F4 (v03 A_M_I_ OEMFACP  07000816 MSFT 00000097)
>ACPI: DSDT cf7805c0 08D10 (v01  A0867 A0867001 00000001 INTL 20060113)
>ACPI: FACS cf78e000 00040
>ACPI: APIC cf780390 0006C (v01 A_M_I_ OEMAPIC  07000816 MSFT 00000097)
>ACPI: MCFG cf780400 0003C (v01 A_M_I_ OEMMCFG  07000816 MSFT 00000097)
>ACPI: OEMB cf78e040 00081 (v01 A_M_I_ AMI_OEM  07000816 MSFT 00000097)
>ACPI: HPET cf7892d0 00038 (v01 A_M_I_ OEMHPET  07000816 MSFT 00000097)
>ACPI: GSCI cf78e0d0 02024 (v01 A_M_I_ GMCHSCI  07000816 MSFT 00000097)
>ACPI: OSFR cf789310 000B0 (v01 A_M_I_ OEMOSFR  07000816 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>2435MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 00018000 - 0001ee80
>(13/32 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #1 [0000400000 - 0000b33130]    TEXT DATA BSS ==> [0000400000 - 0000b33130]
>  #2 [0000b34000 - 0000b3821c]              BRK ==> [0000b34000 - 0000b3821c]
>  #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
>  #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
>  #5 [000009ec00 - 00000f1530]    BIOS reserved ==> [000009ec00 - 00000f1530]
>  #6 [00000f1694 - 00000ff780]    BIOS reserved ==> [00000f1694 - 00000ff780]
>  #7 [00000f1530 - 00000f1694]     MP-table mpc ==> [00000f1530 - 00000f1694]
>  #8 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
>  #9 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
>  #10 [0000015000 - 0000018000]          PGTABLE ==> [0000015000 - 0000018000]
>  #11 [0000b39000 - 0001761000]      NEW RAMDISK ==> [0000b39000 - 0001761000]
>  #12 [0000018000 - 000001f000]          BOOTMAP ==> [0000018000 - 000001f000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x000cf780
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000cf780
>On node 0 totalpages: 849678
>free_area_init_node: node 0, pgdat c09b5d40, node_mem_map c1762200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3950 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 4872 pages used for memmap
>  HighMem zone: 618618 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at cf800000 (gap: cf800000:2f600000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @c3400000 s34388 r0 d22956 u1048576
>pcpu-alloc: s34388 r0 d22956 u1048576 alloc=1*4194304
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 843038
>Kernel command line: ro root=UUID=06e3d8e8-69f9-45a8-8c03-46492e0ba1d0 rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=fi
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 16995520 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000373fe:000cf780)
>Memory: 3334588k/3399168k available (3671k kernel code, 64124k reserved, 2301k data, 548k init, 2493960k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc09d6000 - 0xc0a5f000   ( 548 kB)
>      .data : 0xc0795c62 - 0xc09d5450   (2301 kB)
>      .text : 0xc0400000 - 0xc0795c62   (3671 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3006.059 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6012.11 BogoMIPS (lpj=3006059)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20100121
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 19785 entries in 39 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06
>Booting Node   0, Processors  #1
>Initializing CPU#1
>Brought up 2 CPUs
>Total of 2 processors activated (12023.00 BogoMIPS).
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=508 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=3264 bytes
>devtmpfs: initialized
>Time:  4:47:18  Date: 06/07/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT cf790100 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
>ACPI: SSDT cf7902e0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xcf800000-0xffffffff] (ignored)
>pci 0000:00:02.0: reg 10: [mem 0xfe800000-0xfe8fffff]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xcc00-0xcc07]
>pci 0000:00:02.1: reg 10: [mem 0xfe900000-0xfe9fffff]
>pci 0000:00:1a.0: reg 20: [io  0xc480-0xc49f]
>pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
>pci 0000:00:1a.2: reg 20: [io  0xc880-0xc89f]
>pci 0000:00:1a.7: reg 10: [mem 0xfe7fbc00-0xfe7fbfff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xc000-0xc01f]
>pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
>pci 0000:00:1d.2: reg 20: [io  0xc400-0xc41f]
>pci 0000:00:1d.7: reg 10: [mem 0xfe7fb800-0xfe7fbbff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>pci 0000:00:1f.2: reg 10: [io  0xb880-0xb887]
>pci 0000:00:1f.2: reg 14: [io  0xb800-0xb803]
>pci 0000:00:1f.2: reg 18: [io  0xb480-0xb487]
>pci 0000:00:1f.2: reg 1c: [io  0xb400-0xb403]
>pci 0000:00:1f.2: reg 20: [io  0xb080-0xb09f]
>pci 0000:00:1f.2: reg 24: [mem 0xfe7fa800-0xfe7fafff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xfe7fb400-0xfe7fb4ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:02:00.0: reg 10: [io  0xdc00-0xdc07]
>pci 0000:02:00.0: reg 14: [io  0xd880-0xd883]
>pci 0000:02:00.0: reg 18: [io  0xd800-0xd807]
>pci 0000:02:00.0: reg 1c: [io  0xd480-0xd483]
>pci 0000:02:00.0: reg 20: [io  0xd400-0xd40f]
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
>pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
>pci 0000:01:00.0: PME# supported from D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.5: PCI bridge to [bus 01-01]
>pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:04:00.0: reg 10: [mem 0xfebffc00-0xfebffdff]
>pci 0000:04:03.0: reg 10: [mem 0xfebff000-0xfebff7ff]
>pci 0000:04:03.0: reg 14: [io  0xec00-0xec7f]
>pci 0000:04:03.0: supports D2
>pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
>pci 0000:04:03.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
>reserve RAM buffer: 00000000cf780000 - 00000000cfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:06: [io  0x0290-0x0297] has been reserved
>system 00:07: [io  0x04d0-0x04d1] has been reserved
>system 00:07: [io  0x0800-0x087f] has been reserved
>system 00:07: [io  0x0480-0x04bf] has been reserved
>system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
>system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
>system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
>system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
>system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0e: [mem 0x00100000-0xcf7fffff] could not be reserved
>pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
>pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
>pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
>pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
>pci 0000:00:1c.0: PCI bridge to [bus 03-03]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff]
>pci 0000:00:1c.4:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 01-01]
>pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.5:   bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: enabling device (0106 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: enabling device (0105 -> 0107)
>pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.5: enabling device (0106 -> 0107)
>pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf03fffff]
>pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf05fffff]
>pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 12448k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1307422037.441:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1666
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>pci-stub: invalid id string ""
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G35 Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fa900 irq 27
>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
>ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
>ata4: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7faa80 irq 27
>ata5: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fab00 irq 27
>ata6: SATA max UDMA/133 abar m2048@0xfe7fa800 port 0xfe7fab80 irq 27
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7fbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.34.8-68.fc13.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7fb800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.34.8-68.fc13.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.34.8-68.fc13.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.34.8-68.fc13.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.34.8-68.fc13.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.34.8-68.fc13.i686 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.34.8-68.fc13.i686 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.34.8-68.fc13.i686 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 15:182:767
>rtc_cmos 00:03: setting system clock to 2011-06-07 04:47:19 UTC (1307422039)
>Initalizing network drop monitor service
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
>ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: New USB device found, idVendor=046d, idProduct=c517
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: USB Receiver
>usb 3-1: Manufacturer: Logitech
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
>logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
>logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input3
>logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: New USB device found, idVendor=046d, idProduct=08b2
>usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: Optiarc DVD RW AD-7191S, 1.01, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7191S  1.01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: New USB device found, idVendor=0a5c, idProduct=4500
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: BCM2046B1
>usb 5-1: Manufacturer: Broadcom
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 3 ports detected
>usb 8-1: new low speed USB device using uhci_hcd and address 2
>usb 8-1: New USB device found, idVendor=15c2, idProduct=ffdc
>usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 5-1.1: new full speed USB device using uhci_hcd and address 3
>usb 5-1.1: New USB device found, idVendor=0a5c, idProduct=4502
>usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input4
>generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: ST31500341AS, CC1G, max UDMA/133
>ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>usb 5-1.2: new full speed USB device using uhci_hcd and address 4
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST31500341AS     CC1G PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>usb 5-1.2: New USB device found, idVendor=0a5c, idProduct=4503
>usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input5
>generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
>usb 5-1.3: new full speed USB device using uhci_hcd and address 5
>usb 5-1.3: New USB device found, idVendor=0a5c, idProduct=2146
>usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-1.3: Product: BCM92046DG-CL1ROM
>usb 5-1.3: Manufacturer: Broadcom Corp
>usb 5-1.3: SerialNumber: 000272160FE1
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>Freeing unused kernel memory: 548k freed
>Write protecting the kernel text: 3672k
>Write protecting the kernel read-only data: 1756k
>dracut: dracut-005-5.fc13
>udev: starting version 153
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 28 for MSI/MSI-X
>[drm] set up 7M of stolen space
>[drm] initialized overlay support
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 240x67
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>No ACPI video bus found
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_jmicron 0000:02:00.0: setting latency timer to 64
>scsi6 : pata_jmicron
>scsi7 : pata_jmicron
>ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
>ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
>firewire_ohci 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda3): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/sda3
>dracut: Loading SELinux policy
>firewire_core: created device fw0: GUID 001e8c0001376746, S400
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1307422045.770:2): selinux=0 auid=4294967295 ses=4294967295
>dracut: /sbin/load_policy: Can't load policy: No such file or directory
>dracut: Switching root
>udev: starting version 153
>microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
>microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [??? 0x00000400-0x0000040f flags 0x47]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>Linux video capture interface: v2.00
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>pwc: Philips webcam module version 10.0.13 loaded.
>pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>pwc: Logitech QuickCam 4000 Pro USB webcam detected.
>pwc: Registered as video0.
>input: PWC snapshot button as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/input/input6
>usbcore: registered new interface driver Philips webcam
>atl1 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>atl1 0000:01:00.0: setting latency timer to 64
>atl1 0000:01:00.0: version 2.1.3
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input7
>imon 8-1:1.0: iMON device (15c2:ffdc, intf0) on usb<8:2> initialized
>usbcore: registered new interface driver imon
>saa7146: register extension 'budget_ci dvb'.
>budget_ci dvb 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
>saa7146: found saa7146 @ mem f8f2ac00 (revision 1, irq 16) (0x13c2,0x101a).
>saa7146 (0): dma buffer size 192512
>DVB: registering new adapter (TT-Budget C-1501 PCI)
>adapter has MAC addr = 00:d0:5c:c6:4e:d8
>input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/input/input8
>Creating IR device irrcv0
>budget_ci: CI interface initialised
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>microcode: CPU0 updated to revision 0x60c, date = 2008-01-19
>microcode: CPU1 updated to revision 0x60c, date = 2008-01-19
>DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
>hda_codec: ALC883: BIOS auto-probing.
>ALSA sound/pci/hda/hda_codec.c:4385: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:4389:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4393:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4394:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:4397:    dig-out=0x1e/0x0
>ALSA sound/pci/hda/hda_codec.c:4405:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_realtek.c:1287: realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
>ALSA sound/pci/hda/patch_realtek.c:1303: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0883
>ALSA sound/pci/hda/hda_eld.c:351: HDMI: ELD buf size is 0, force 128
>ALSA sound/pci/hda/hda_eld.c:265: HDMI: Unknown ELD version 0
>usbcore: registered new interface driver snd-usb-audio
>dvb_ca adapter 0: DVB CAM detected and initialised successfully
>EXT3-fs (sda3): using internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sdb1): using internal journal
>EXT3-fs (sdb1): mounted filesystem with ordered data mode
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): using internal journal
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>Adding 2006404k swap on /dev/sda5.  Priority:-1 extents:1 across:2006404k

Actions: View

Attachments on bug 39314: 49222 | 49223 | 49224 | 49225 | 49271 | 49272 | 49337

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.