Attachment 49975 Details for Bug 39866 – Dmesg from a non-working boot without video=TV-1:d

Dmesg from a non-working boot without video=TV-1:d

dmesg-not-working.txt (text/plain), 31.83 KB, created by Jon Sturm on 2011-08-05 14:23:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jon Sturm

Created: 2011-08-05 14:23:14 UTC

Size: 31.83 KB

patch

obsolete

>Allocated 4096 bytes for 4 pacas at c00000000ffff000
>DART table allocated at: c00000007f000000
>Using PowerMac machine description
>Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
>Found initrd at 0xc000000001500000:0xc000000001688000
>Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
>Mapped at 0xd000080080000000
>Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000
>PowerMac motherboard: PowerMac G5
>DART IOMMU initialized for U3 type chipset
>bootconsole [udbg0] enabled
>CPU maps initialized for 1 thread per core
> (thread shift is 0)
>Starting Linux PPC64 #1 SMP PREEMPT Fri Jun 3 12:12:49 UTC 2011
>-----------------------------------------------------
>ppc64_pft_size                = 0x0
>physicalMemorySize            = 0x130000000
>htab_address                  = 0xc0000001a8000000
>htab_hash_mask                = 0xfffff
>-----------------------------------------------------
>Initializing cgroup subsys cpu
>Linux version 2.6.39-ARCH64 (root@ArchG5) (gcc version 4.6.1 20110429 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 3 12:12:49 UTC 2011
>[boot]0012 Setup Arch
>Top of RAM: 0x1b0000000, Total RAM: 0x130000000
>Memory hole size: 2048MB
>Found U3-AGP PCI host bridge.  Firmware bus number: 240->255
>PCI host bridge /pci@0,f0000000  ranges:
> MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
>  IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
> MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 
>Can't get bus-range for /ht@0,f2000000, assume bus 0
>Found U3-HT PCI host bridge.  Firmware bus number: 0->239
>PCI host bridge /ht@0,f2000000 (primary) ranges:
>via-pmu: Server Mode is disabled
>PMU driver v2 initialized for Core99, firmware: 0c
>nvram: Checking bank 0...
>nvram: gen0=666, gen1=667
>nvram: Active bank is: 1
>nvram: OF partition at 0x410
>nvram: XP partition at 0x1020
>nvram: NR partition at 0x1120
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x001b0000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x00080000
>    0: 0x00100000 -> 0x001b0000
>On node 0 totalpages: 1245184
>  DMA zone: 24192 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 1220992 pages, LIFO batch:31
>[boot]0015 Setup Done
>PERCPU: Embedded 12 pages/cpu @c000000000900000 s19840 r0 d29312 u524288
>pcpu-alloc: s19840 r0 d29312 u524288 alloc=1*1048576
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1220992
>Policy zone: DMA
>Kernel command line: root=/dev/sda5 ro nouveau.modeset=1 resume=/dev/sda6 
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>freeing bootmem node 0
>Memory: 4740460k/4980736k available (7356k kernel code, 240276k reserved, 944k data, 410k bss, 332k init)
>SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=256
>Preemptable hierarchical RCU implementation.
>	CONFIG_RCU_FANOUT set to non-default value of 32
>	RCU-based detection of stalled CPUs is disabled.
>	Verbose stalled-CPUs detection is disabled.
>NR_IRQS:512 nr_irqs:512 16
>mpic: Resetting
>mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
>mpic: ISU size: 120, shift: 7, mask: 7f
>mpic: Initializing for 120 sources
>irq: irq 56 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 56
>mpic: Resetting
>mpic: Setting up MPIC " MPIC 2   " version 1.2 at f8040000, max 4 CPUs
>mpic: ISU size: 124, shift: 7, mask: 7f
>mpic: Initializing for 124 sources
>time_init: decrementer frequency = 33.333333 MHz
>time_init: processor frequency   = 2000.000000 MHz
>clocksource: timebase mult[7800001] shift[22] registered
>clockevent: decrementer mult[8888887] shift[32] cpu[0]
>Console: colour dummy device 80x25
>console [tty0] enabled, bootconsole disabled
>irq: irq 22 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 22
>irq: irq 23 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 23
>pid_max: default: 32768 minimum: 301
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>PowerMac SMP probe found 2 cpus
>irq: irq 0 on host /u3@0,f8000000/mpic@f8040000 mapped to virtual irq 16
>KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
> channel 0 bus <multibus>
> channel 1 bus <multibus>
>irq: irq 26 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 26
>KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
> channel 0 bus <multibus>
>PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
> channel 1 bus <multibus>
> channel 2 bus <multibus>
>Processor timebase sync using Pulsar i2c clock
>mpic: requesting IPIs...
>irq: irq 251 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 251
>irq: irq 252 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 252
>irq: irq 253 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 253
>irq: irq 254 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 254
>PPC970/FX/MP performance monitor hardware support registered
>Brought up 2 CPUs
>------------[ cut here ]------------
>WARNING: at drivers/base/memory.c:129
>Modules linked in:
>NIP: c0000000003308a0 LR: c000000000330890 CTR: c000000000063f60
>REGS: c0000001a6cf3b00 TRAP: 0700   Not tainted  (2.6.39-ARCH64)
>MSR: 9000000000029032 <EE,ME,CE,IR,DR>  CR: 24000048  XER: 20000000
>TASK = c0000001a6ce8000[1] 'swapper' THREAD: c0000001a6cf0000 CPU: 0
>GPR00: 0000000000ffffff c0000001a6cf3d80 c000000000808b80 0000000000000000 
>GPR04: c000000000658d39 c0000001a6867000 0000000000000000 0000000000000000 
>GPR08: 0000000000000002 0000000000000000 000000000000008d 000000000000006d 
>GPR12: 0000000024000082 c00000000ffff000 000000000000002c 00000000000000d7 
>GPR16: 0000000001789012 0000000001318f18 00000000ff88d560 0000000001788028 
>GPR20: c000000000718f08 c00000000071a420 c00000000071a428 c000000000718f00 
>GPR24: 000000000178a6c8 0000000000c00000 0000000000c00000 c00000000089f880 
>GPR28: c00000000081f520 c0000000007255a0 c000000000796438 0000000000000000 
>NIP [c0000000003308a0] .get_memory_block_size+0x20/0x60
>LR [c000000000330890] .get_memory_block_size+0x10/0x60
>Call Trace:
>[c0000001a6cf3d80] [c000000000330890] .get_memory_block_size+0x10/0x60 (unreliable)
>[c0000001a6cf3df0] [c00000000070b438] .memory_dev_init+0x4c/0x150
>[c0000001a6cf3e90] [c00000000070b2fc] .driver_init+0x48/0x5c
>[c0000001a6cf3f00] [c0000000006dca48] .kernel_init+0xa4/0x18c
>[c0000001a6cf3f90] [c00000000001ebb4] .kernel_thread+0x54/0x70
>Instruction dump:
>3c600100 4e800020 60000000 60000000 7c0802a6 f8010010 f821ff91 4bd30225 
>60000000 3803ffff 7c091839 41820024 <0fe00000> 38210070 3c600100 e8010010 
>---[ end trace 31fd0ba7d8756001 ]---
>print_constraints: dummy: 
>NET: Registered protocol family 16
>CPU Hotplug not supported by firmware - disabling.
>irq: irq 25 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 25
>irq: irq 47 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 47
>PCI: Probing PCI hardware
>pci 0000:f0:0b.0: [106b:0059] type 0 class 0x000600
>pci 0000:f0:10.0: [10de:0321] type 0 class 0x000300
>pci 0000:f0:10.0: reg 10: [mem 0x91000000-0x91ffffff]
>pci 0000:f0:10.0: reg 14: [mem 0x98000000-0x9fffffff pref]
>pci 0000:f0:10.0: reg 30: [mem 0x90000000-0x9001ffff pref]
>IOMMU table initialized, virtual merging enabled
>irq: irq 48 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 48
>pci 0001:00:00.0: [106b:0057] type 0 class 0x000600
>pci 0001:00:01.0: [1022:7450] type 1 class 0x000604
>pci 0001:00:02.0: [1022:7450] type 1 class 0x000604
>pci 0001:00:03.0: [106b:0045] type 1 class 0x000604
>pci 0001:00:04.0: [106b:0046] type 1 class 0x000604
>pci 0001:00:05.0: [106b:0047] type 1 class 0x000604
>pci 0001:00:06.0: [106b:0048] type 1 class 0x000604
>pci 0001:00:07.0: [106b:0049] type 1 class 0x000604
>pci 0001:00:01.0: PCI bridge to [bus 06-06]
>pci 0001:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0001:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0001:00:02.0: PCI bridge to [bus 07-07]
>pci 0001:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:02.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0001:00:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0001:01:07.0: [106b:0041] type 0 class 0x00ff00
>pci 0001:01:07.0: reg 10: [mem 0x80000000-0x8007ffff]
>pci 0001:01:08.0: [106b:0040] type 0 class 0x000c03
>pci 0001:01:08.0: reg 10: [mem 0x80081000-0x80081fff]
>pci 0001:01:09.0: [106b:0040] type 0 class 0x000c03
>pci 0001:01:09.0: reg 10: [mem 0x80080000-0x80080fff]
>pci 0001:00:03.0: PCI bridge to [bus 01-01]
>pci 0001:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:03.0:   bridge window [mem 0x80000000-0x800fffff]
>pci 0001:00:03.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
>irq: irq 27 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 27
>irq: irq 28 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 28
>pci 0001:02:0b.0: [1033:0035] type 0 class 0x000c03
>pci 0001:02:0b.0: reg 10: [mem 0x80102000-0x80102fff]
>pci 0001:02:0b.0: supports D1 D2
>pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:02:0b.0: PME# disabled
>pci 0001:02:0b.1: [1033:0035] type 0 class 0x000c03
>pci 0001:02:0b.1: reg 10: [mem 0x80101000-0x80101fff]
>pci 0001:02:0b.1: supports D1 D2
>pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:02:0b.1: PME# disabled
>pci 0001:02:0b.2: [1033:00e0] type 0 class 0x000c03
>pci 0001:02:0b.2: reg 10: [mem 0x80100000-0x801000ff]
>pci 0001:02:0b.2: supports D1 D2
>pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:02:0b.2: PME# disabled
>pci 0001:00:04.0: PCI bridge to [bus 02-02]
>pci 0001:00:04.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:04.0:   bridge window [mem 0x80100000-0x801fffff]
>pci 0001:00:04.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
>irq: irq 63 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 63
>pci 0001:03:0d.0: [106b:0043] type 0 class 0x00ff00
>pci 0001:03:0d.0: reg 10: [mem 0x80204000-0x80207fff]
>pci 0001:03:0e.0: [106b:0042] type 0 class 0x000c00
>pci 0001:03:0e.0: reg 10: [mem 0x80200000-0x80200fff]
>pci 0001:03:0e.0: supports D1 D2
>pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0001:03:0e.0: PME# disabled
>pci 0001:00:05.0: PCI bridge to [bus 03-03]
>pci 0001:00:05.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:05.0:   bridge window [mem 0x80200000-0x802fffff]
>pci 0001:00:05.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
>irq: irq 39 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 39
>irq: irq 40 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 40
>pci 0001:04:0f.0: [106b:004c] type 0 class 0x000200
>pci 0001:04:0f.0: reg 10: [mem 0x80400000-0x805fffff]
>pci 0001:04:0f.0: reg 30: [mem 0x80300000-0x803fffff pref]
>pci 0001:00:06.0: PCI bridge to [bus 04-04]
>pci 0001:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:06.0:   bridge window [mem 0x80300000-0x805fffff]
>pci 0001:00:06.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
>irq: irq 41 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 41
>pci 0001:05:0c.0: [1166:0240] type 0 class 0x000101
>pci 0001:05:0c.0: reg 10: [io  0x0000-0x0007]
>pci 0001:05:0c.0: reg 14: [io  0x0000-0x0003]
>pci 0001:05:0c.0: reg 18: [io  0x0000-0x0007]
>pci 0001:05:0c.0: reg 1c: [io  0x0000-0x0003]
>pci 0001:05:0c.0: reg 20: [io  0x0000-0x000f]
>pci 0001:05:0c.0: reg 24: [mem 0x80600000-0x80601fff]
>pci 0001:00:07.0: PCI bridge to [bus 05-05]
>pci 0001:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0001:00:07.0:   bridge window [mem 0x80600000-0x806fffff]
>pci 0001:00:07.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
>irq: irq 0 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 17
>pci 0001:00:01.0: PCI bridge to [bus 06-06]
>pci 0001:00:01.0:   bridge window [io  disabled]
>pci 0001:00:01.0:   bridge window [mem disabled]
>pci 0001:00:01.0:   bridge window [mem pref disabled]
>pci 0001:00:02.0: PCI bridge to [bus 07-07]
>pci 0001:00:02.0:   bridge window [io  disabled]
>pci 0001:00:02.0:   bridge window [mem disabled]
>pci 0001:00:02.0:   bridge window [mem pref disabled]
>pci 0001:00:03.0: PCI bridge to [bus 01-01]
>pci 0001:00:03.0:   bridge window [io  disabled]
>pci 0001:00:03.0:   bridge window [mem 0x80000000-0x800fffff]
>pci 0001:00:03.0:   bridge window [mem pref disabled]
>pci 0001:00:04.0: PCI bridge to [bus 02-02]
>pci 0001:00:04.0:   bridge window [io  disabled]
>pci 0001:00:04.0:   bridge window [mem 0x80100000-0x801fffff]
>pci 0001:00:04.0:   bridge window [mem pref disabled]
>pci 0001:00:05.0: PCI bridge to [bus 03-03]
>pci 0001:00:05.0:   bridge window [io  disabled]
>pci 0001:00:05.0:   bridge window [mem 0x80200000-0x802fffff]
>pci 0001:00:05.0:   bridge window [mem pref disabled]
>pci 0001:00:06.0: PCI bridge to [bus 04-04]
>pci 0001:00:06.0:   bridge window [io  disabled]
>pci 0001:00:06.0:   bridge window [mem 0x80300000-0x805fffff]
>pci 0001:00:06.0:   bridge window [mem pref disabled]
>pci 0001:00:07.0: PCI bridge to [bus 05-05]
>pci 0001:00:07.0:   bridge window [io  disabled]
>pci 0001:00:07.0:   bridge window [mem 0x80600000-0x806fffff]
>pci 0001:00:07.0:   bridge window [mem pref disabled]
>pci_bus 0000:f0: resource 0 [io  0x10000-0x80ffff]
>pci_bus 0000:f0: resource 1 [mem 0xf1000000-0xf1ffffff]
>pci_bus 0000:f0: resource 2 [mem 0x90000000-0x9fffffff]
>pci_bus 0001:00: resource 0 [io  0x812000-0xc11fff]
>pci_bus 0001:00: resource 1 [mem 0xfa000000-0xffffffff]
>pci_bus 0001:00: resource 2 [mem 0x80000000-0x8fffffff]
>pci_bus 0001:00: resource 3 [mem 0xa0000000-0xefffffff]
>pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
>pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff]
>pci_bus 0001:03: resource 1 [mem 0x80200000-0x802fffff]
>pci_bus 0001:04: resource 1 [mem 0x80300000-0x805fffff]
>pci_bus 0001:05: resource 1 [mem 0x80600000-0x806fffff]
>PCI: Probing PCI hardware done
>Registering pmac pic with sysfs...
>bio: create slab <bio-0> at 0
>vgaarb: device added: PCI:0000:f0:10.0,decodes=io+mem,owns=mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Switching to clocksource timebase
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #0
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 4096 (order: 6, 262144 bytes)
>UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled
>pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled
>pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>PCI: CLS mismatch (32 != 64), using 128 bytes
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 1568k freed
>Hypercall H_BEST_ENERGY not supported
>audit: initializing netlink socket (disabled)
>type=2000 audit(1312579112.213:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Registering the id_resolver key type
>msgmni has been set to 9261
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered (default)
>vga16fb: initializing
>vga16fb: unable to map device
>vga16fb: probe of vga16fb.0 failed with error -12
>Using unsupported 832x624 NVDA,Display-B at 98004000, depth=8, pitch=1024
>Console: switching to colour frame buffer device 104x39
>fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@10/NVDA,Display-B@1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>pmac_zilog: Error registering serial device, disabling pmac_zilog.
>pmac_zilog: Did another serial driver already claim the minors?
>Attempt to iounmap early bolted mapping at 0x          (null)
>Attempt to iounmap early bolted mapping at 0x          (null)
>Attempt to iounmap early bolted mapping at 0x          (null)
>Attempt to iounmap early bolted mapping at 0x          (null)
>brd: module loaded
>loop: module loaded
>Driver for timberdale has been successfully registered.
>MacIO PCI driver attached to K2 chipset
>irq: irq 32 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 32
>irq: irq 5 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 18
>irq: irq 6 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 19
>irq: irq 7 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 20
>irq: irq 8 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 21
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0001:02:0b.2: enabling device (0004 -> 0006)
>ehci_hcd 0001:02:0b.2: EHCI Host Controller
>ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
>ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.39-ARCH64 ehci_hcd
>usb usb1: SerialNumber: 0001:02:0b.2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver appledisplay
>mousedev: PS/2 mouse device common for all mice
>rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
>i2c /dev entries driver
>PowerMac i2c bus pmu 2 registered
>PowerMac i2c bus pmu 1 registered
>PowerMac i2c bus mac-io 0 registered
>PowerMac i2c bus u3 1 registered
>PowerMac i2c bus u3 0 registered
>oprofile: using ppc64/970 performance monitoring.
>IPv4 over IPv4 tunneling driver
>TCP cubic registered
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>PM: Registered nosave memory: 000000007f000000 - 0000000080000000
>input: PMU as /devices/virtual/input/input0
>Registered led device: pmu-led::front
>rtc-generic rtc-generic: setting system clock to 2011-08-05 21:18:33 UTC (1312579113)
>Freeing unused kernel memory: 332k freed
>libata version 3.00 loaded.
>pata-pci-macio 0001:03:0d.0: enabling device (0014 -> 0016)
>pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset K2 ATA-6, Apple bus ID 3
>scsi0 : pata_macio
>ata1: PATA max UDMA/100 irq 39
>sata_svw 0001:05:0c.0: version 2.3
>scsi1 : sata_svw
>scsi2 : sata_svw
>scsi3 : sata_svw
>scsi4 : sata_svw
>ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17
>ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17
>ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17
>ata5: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17
>ata1.00: ATAPI: PIONEER DVD-RW  DVR-107D, A707, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-107D A707 PQ: 0 ANSI: 5
>ata1.00: K2/Shasta alignment limits applied
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: Maxtor 6Y160M0, YAR51HW0, max UDMA/133
>ata2.00: 320173056 sectors, multi 0: LBA48 
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6Y160M0   YAR5 PQ: 0 ANSI: 5
>ata3: SATA link down (SStatus 4 SControl 300)
>ata4: SATA link down (SStatus 4 SControl 300)
>ata5: SATA link down (SStatus 4 SControl 300)
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sd 1:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
>sd 1:0:0:0: [sda] Attached SCSI disk
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): mounted filesystem with writeback data mode
>udevd[2599]: starting version 171
>Linux agpgart interface v0.103
>agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset
>agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
>agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
>temperature temperature: PowerMac G5 Thermal control driver 1.3
>Detected fan controls:
>  0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
>  1: RPM fan, id 2, location: DRIVE BAY
>  2: PWM fan, id 2, location: SLOT,PCI FAN
>  3: RPM fan, id 3, location: CPU A INTAKE
>  4: RPM fan, id 4, location: CPU A EXHAUST
>  5: RPM fan, id 5, location: CPU B INTAKE
>  6: RPM fan, id 6, location: CPU B EXHAUST
>  7: RPM fan, id 1, location: CPU A PUMP
>  8: RPM fan, id 0, location: CPU B PUMP
>i2c i2c-0: therm_pm72: attach_adapter method is deprecated
>i2c i2c-0: Please use another way to instantiate your i2c_client
>i2c i2c-1: therm_pm72: attach_adapter method is deprecated
>i2c i2c-1: Please use another way to instantiate your i2c_client
>i2c i2c-2: therm_pm72: attach_adapter method is deprecated
>i2c i2c-2: Please use another way to instantiate your i2c_client
>i2c i2c-3: therm_pm72: attach_adapter method is deprecated
>i2c i2c-3: Please use another way to instantiate your i2c_client
>i2c i2c-4: therm_pm72: attach_adapter method is deprecated
>i2c i2c-4: Please use another way to instantiate your i2c_client
>Liquid cooling pumps detected, using new algorithm !
>FCU Initialized, RPM fan shift is 3
>firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
>firewire_ohci: Added fw-ohci device 0001:03:0e.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>[drm] Initialized drm 1.1.0 20060810
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0001:01:08.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:01:08.0: OHCI Host Controller
>ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
>sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
>sungem_phy: PHY ID: 2062e0, addr: 1
>gem 0001:04:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:30:e3:ba
>gem 0001:04:0f.0: eth0: Found BCM5421-K2 PHY
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.39-ARCH64 ohci_hcd
>usb usb2: SerialNumber: 0001:01:08.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0001:01:09.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:01:09.0: OHCI Host Controller
>ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.39-ARCH64 ohci_hcd
>usb usb3: SerialNumber: 0001:01:09.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0001:02:0b.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:02:0b.0: OHCI Host Controller
>ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.39-ARCH64 ohci_hcd
>usb usb4: SerialNumber: 0001:02:0b.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ohci_hcd 0001:02:0b.1: enabling device (0000 -> 0002)
>ohci_hcd 0001:02:0b.1: OHCI Host Controller
>ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5
>ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.39-ARCH64 ohci_hcd
>usb usb5: SerialNumber: 0001:02:0b.1
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>firewire_core: created device fw0: GUID 000d93fffe30e3ba, S800
>irq: irq 30 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 30
>irq: irq 1 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 24
>irq: irq 2 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 29
>usb 4-1: new full speed USB device number 2 using ohci_hcd
>[drm] nouveau 0000:f0:10.0: Detected an NV30 generation card (0x034100a2)
>checking generic (98004000 9c000) vs hw (98000000 8000000)
>fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver
>Console: switching to colour dummy device 80x25
>Trying to free nonexistent resource <0000000098004000-000000009809ffff>
>[drm] nouveau 0000:f0:10.0: OF bios successfully copied (2403 bytes)
>[drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:f0:10.0: ... BIOS checksum invalid
>[drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PROM
>usb 4-1: New USB device found, idVendor=05ac, idProduct=1003
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: Hub in Apple Extended USB Keyboard
>usb 4-1: Manufacturer: Mitsumi Electric
>hub 4-1:1.0: USB hub found
>hub 4-1:1.0: 3 ports detected
>[drm] nouveau 0000:f0:10.0: ... BIOS checksum invalid
>[drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PCIROM
>[drm] nouveau 0000:f0:10.0: ... BIOS signature not found
>[drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from ACPI
>[drm] nouveau 0000:f0:10.0: ... BIOS signature not found
>[drm] nouveau 0000:f0:10.0: Using BIOS image from PRAMIN
>snd-aoa-fabric-layout: Using PMF GPIOs
>[drm] nouveau 0000:f0:10.0: BMP BIOS found
>[drm] nouveau 0000:f0:10.0: BMP version 5.39
>[drm] nouveau 0000:f0:10.0: Bios version 04.34.20.19
>[drm] nouveau 0000:f0:10.0: Found Display Configuration Block version 2.2
>[drm] nouveau 0000:f0:10.0: Raw DCB entry 0: 01100102 00000000
>[drm] nouveau 0000:f0:10.0: Raw DCB entry 1: 01000100 000088b8
>[drm] nouveau 0000:f0:10.0: Raw DCB entry 2: 02110212 11b00000
>[drm] nouveau 0000:f0:10.0: Raw DCB entry 3: 02010210 11b088b8
>[drm] nouveau 0000:f0:10.0: Raw DCB entry 4: 02010211 11b00003
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 0 at offset 0x020A
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 1 at offset 0x0457
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 2 at offset 0x059D
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 3 at offset 0x0723
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 4 at offset 0x0740
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 5 at offset 0x075D
>[drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 6 at offset 0x08E2
>i2c i2c-5: therm_pm72: attach_adapter method is deprecated
>i2c i2c-5: Please use another way to instantiate your i2c_client
>i2c i2c-0: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-0: Please use another way to instantiate your i2c_client
>i2c i2c-1: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-1: Please use another way to instantiate your i2c_client
>i2c i2c-2: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-2: Please use another way to instantiate your i2c_client
>snd-aoa-codec-tas: found 'deq' node
>snd-aoa-fabric-layout: can use this codec
>irq: irq 61 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 61
>irq: irq 60 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 60
>snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
>i2c i2c-3: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-3: Please use another way to instantiate your i2c_client
>i2c i2c-4: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-4: Please use another way to instantiate your i2c_client
>i2c i2c-5: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-5: Please use another way to instantiate your i2c_client
>[drm] nouveau 0000:f0:10.0: Detected monitoring device: max6646
>[drm] nouveau 0000:f0:10.0: 0 available performance level(s)
>[drm] nouveau 0000:f0:10.0: c: memory 553MHz core 300MHz
>[TTM] Zone  kernel: Available graphics memory: 2371180 kiB.
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[TTM] Initializing pool allocator.
>[drm] nouveau 0000:f0:10.0: Detected 64MiB VRAM
>[drm] nouveau 0000:f0:10.0: 64 MiB GART (aperture)
>usb 4-1.3: new full speed USB device number 3 using ohci_hcd
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on tmds encoder (output 0)
>[drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on vga encoder (output 1)
>[drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on tmds encoder (output 2)
>[drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on TV encoder (output 4)
>i2c i2c-6: therm_pm72: attach_adapter method is deprecated
>i2c i2c-6: Please use another way to instantiate your i2c_client
>i2c i2c-6: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-6: Please use another way to instantiate your i2c_client
>i2c i2c-7: therm_pm72: attach_adapter method is deprecated
>i2c i2c-7: Please use another way to instantiate your i2c_client
>i2c i2c-7: aoa_codec_tas: attach_adapter method is deprecated
>i2c i2c-7: Please use another way to instantiate your i2c_client
>usb 4-1.3: New USB device found, idVendor=05ac, idProduct=020b
>usb 4-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 4-1.3: Product: Apple Extended USB Keyboard
>usb 4-1.3: Manufacturer: Mitsumi Electric
>[drm] nouveau 0000:f0:10.0: Load detected on output B
>[drm] nouveau 0000:f0:10.0: allocated 720x576 fb: 0x49000, bo c0000001a35ab800
>[drm] nouveau 0000:f0:10.0: Setting dpms mode 0 on TV encoder (output 4)
>[drm] nouveau 0000:f0:10.0: Output TV-1 is running on CRTC 1 using output B
>Console: switching to colour frame buffer device 90x36
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:f0:10.0 on minor 0
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input1
>generic-usb 0003:05AC:020B.0001: input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.0-1.3/input0
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.0/usb4/4-1/4-1.3/4-1.3:1.1/input/input2
>generic-usb 0003:05AC:020B.0002: input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.0-1.3/input1
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>EXT3-fs (sda5): using internal journal
>Adding 6291452k swap on /dev/sda6.  Priority:-1 extents:1 across:6291452k 
>gem 0001:04:0f.0: eth0: Link is up at 1000 Mbps, full-duplex
>gem 0001:04:0f.0: eth0: Link is up at 1000 Mbps, full-duplex
>gem 0001:04:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
>NET: Registered protocol family 10
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 39866: 49974 | 49975 | 49996 | 50256 | 50257

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.