Attachment 50680 Details for Bug 40485 – dmesg

dmesg

dmesg.log (text/plain), 55.11 KB, created by Dennis Schridde on 2011-08-30 03:15:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dennis Schridde

Created: 2011-08-30 03:15:18 UTC

Size: 55.11 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.0.3-gentoo (root@ernie) (gcc version 4.6.1 (Gentoo 4.6.1-r1 p1.0, pie-0.4.5) ) #1 SMP Thu Aug 18 18:11:00 CEST 2011
>Command line: BOOT_IMAGE=/vmlinuz-3.0.3-gentoo root=UUID=3e693134-6c43-424c-a0b8-5d0404cda934 ro resume=UUID=de48087a-89d8-4be1-afb1-8df3b8010883 video=nouveaufb fbcon=scrollback:128k console=tty1 quiet
>BIOS-provided physical RAM map:
>BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
>BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
>BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
>BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
>BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
>BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: System manufacturer System Product Name/M2N-SLI DELUXE, BIOS ASUS M2N-SLI DELUXE ACPI BIOS Revision 5001 02/04/2010
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
> 00000-9FFFF write-back
> A0000-BFFFF uncachable
> C0000-C7FFF write-protect
> C8000-FFFFF uncachable
>MTRR variable ranges enabled:
> 0 base 0000000000 mask FF80000000 write-back
> 1 base 0080000000 mask FFC0000000 write-back
> 2 base 00BFF00000 mask FFFFF00000 uncachable
> 3 base 0100000000 mask FF80000000 write-back
> 4 base 0180000000 mask FFC0000000 write-back
> 5 disabled
> 6 disabled
> 7 disabled
>TOM2: 00000001c0000000 aka 7168M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff88000009a000] 9a000 size 20480
>init_memory_mapping: 0000000000000000-00000000bfee0000
>0000000000 - 00bfe00000 page 2M
>00bfe00000 - 00bfee0000 page 4k
>kernel direct mapping tables up to bfee0000 @ bfedb000-bfee0000
>init_memory_mapping: 0000000100000000-00000001c0000000
>0100000000 - 01c0000000 page 2M
>kernel direct mapping tables up to 1c0000000 @ 1bfff8000-1c0000000
>RAMDISK: 37538000 - 37a94000
>ACPI: RSDP 00000000000f7a80 00024 (v02 Nvidia)
>ACPI: XSDT 00000000bfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
>ACPI: FACP 00000000bfeea640 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
>ACPI: DSDT 00000000bfee3280 0735E (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000bfee0000 00040
>ACPI: SSDT 00000000bfeea880 0028A (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000bfeeab80 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
>ACPI: MCFG 00000000bfeeac00 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
>ACPI: APIC 00000000bfeea780 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
>ACPI: Local APIC address 0xfee00000
>[ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
>Zone PFN ranges:
> DMA      0x00000010 -> 0x00001000
> DMA32    0x00001000 -> 0x00100000
> Normal   0x00100000 -> 0x001c0000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>   0: 0x00000010 -> 0x0000009f
>   0: 0x00000100 -> 0x000bfee0
>   0: 0x00100000 -> 0x001c0000
>On node 0 totalpages: 1572463
> DMA zone: 56 pages used for memmap
> DMA zone: 5 pages reserved
> DMA zone: 3922 pages, LIFO batch:0
> DMA32 zone: 14280 pages used for memmap
> DMA32 zone: 767768 pages, LIFO batch:31
> Normal zone: 10752 pages used for memmap
> Normal zone: 775680 pages, LIFO batch:31
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfefff000
>4 Processors exceeds NR_CPUS limit of 2
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
>PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
>PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
>PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
>PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 24 pages/cpu @ffff8801bfc00000 s68992 r8192 d21120 u1048576
>pcpu-alloc: s68992 r8192 d21120 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1547370
>Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.3-gentoo root=UUID=3e693134-6c43-424c-a0b8-5d0404cda934 ro resume=UUID=de48087a-89d8-4be1-afb1-8df3b8010883 video=nouveaufb fbcon=scrollback:128k console=tty1 quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 8122000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ b4000000
>PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
>Memory: 6048276k/7340032k available (3438k kernel code, 1050180k absent, 241576k reserved, 1453k data, 432k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:320
>Extended CMOS year: 2000
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty1] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2611.978 MHz processor.
>Marking TSC unstable due to TSCs unsynchronized
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.95 BogoMIPS (lpj=2611978)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys blkio
>tseg: 00bff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using AMD E400 aware idle routine
>ACPI: Core revision 20110413
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>Booting Node   0, Processors  #1 Ok.
>smpboot cpu 1: start_ip = 9a000
>Brought up 2 CPUs
>Total of 2 processors activated (10447.75 BogoMIPS).
>PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
>NET: Registered protocol family 16
>node 0 link 0: io port [b000, ffff]
>TOM: 00000000c0000000 aka 3072M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [c0000000, efffffff]
>node 0 link 0: mmio [f4000000, fe02ffff]
>node 0 link 0: mmio [f0000000, f03fffff]
>TOM2: 00000001c0000000 aka 7168M
>bus: [00, 03] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xc0000000-0xf3ffffff]
>bus: 00 index 3 [mem 0xf4000000-0xffffffff]
>bus: 00 index 4 [mem 0x1c0000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff]
>pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
>pci 0000:00:01.0: [10de:0360] type 0 class 0x000601
>pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
>pci 0000:00:01.1: reg 10: [io  0xff00-0xff3f]
>pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
>pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
>pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
>pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
>pci 0000:00:04.0: reg 20: [io  0xfc00-0xfc0f]
>pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
>pci 0000:00:05.0: reg 10: [io  0x09f0-0x09f7]
>pci 0000:00:05.0: reg 14: [io  0x0bf0-0x0bf3]
>pci 0000:00:05.0: reg 18: [io  0x0970-0x0977]
>pci 0000:00:05.0: reg 1c: [io  0x0b70-0x0b73]
>pci 0000:00:05.0: reg 20: [io  0xf700-0xf70f]
>pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
>pci 0000:00:05.1: reg 10: [io  0x09e0-0x09e7]
>pci 0000:00:05.1: reg 14: [io  0x0be0-0x0be3]
>pci 0000:00:05.1: reg 18: [io  0x0960-0x0967]
>pci 0000:00:05.1: reg 1c: [io  0x0b60-0x0b63]
>pci 0000:00:05.1: reg 20: [io  0xf200-0xf20f]
>pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
>pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
>pci 0000:00:05.2: reg 10: [io  0xf100-0xf107]
>pci 0000:00:05.2: reg 14: [io  0xf000-0xf003]
>pci 0000:00:05.2: reg 18: [io  0xef00-0xef07]
>pci 0000:00:05.2: reg 1c: [io  0xee00-0xee03]
>pci 0000:00:05.2: reg 20: [io  0xed00-0xed0f]
>pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
>pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
>pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
>pci 0000:00:06.1: reg 10: [mem 0xfe020000-0xfe023fff]
>pci 0000:00:06.1: PME# supported from D3hot D3cold
>pci 0000:00:06.1: PME# disabled
>pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
>pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:08.0: reg 14: [io  0xec00-0xec07]
>pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff]
>pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f]
>pci 0000:00:08.0: supports D1 D2
>pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
>pci 0000:00:09.0: reg 10: [mem 0xfe027000-0xfe027fff]
>pci 0000:00:09.0: reg 14: [io  0xeb00-0xeb07]
>pci 0000:00:09.0: reg 18: [mem 0xfe026000-0xfe0260ff]
>pci 0000:00:09.0: reg 1c: [mem 0xfe025000-0xfe02500f]
>pci 0000:00:09.0: supports D1 D2
>pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:0e.0: [10de:0375] type 1 class 0x000604
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
>pci 0000:01:0b.0: [104c:8023] type 0 class 0x000c00
>pci 0000:01:0b.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
>pci 0000:01:0b.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
>pci 0000:01:0b.0: supports D1 D2
>pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:01:0b.0: PME# disabled
>pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
>pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:06.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:06.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:06.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:06.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
>pci 0000:02:00.0: [197b:2363] type 0 class 0x000106
>pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
>pci 0000:02:00.0: reg 30: [mem 0xfdde0000-0xfddeffff pref]
>pci 0000:02:00.0: PME# supported from D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.1: [197b:2363] type 0 class 0x000101
>pci 0000:02:00.1: reg 10: [io  0xdc00-0xdc07]
>pci 0000:02:00.1: reg 14: [io  0xd800-0xd803]
>pci 0000:02:00.1: reg 18: [io  0xd400-0xd407]
>pci 0000:02:00.1: reg 1c: [io  0xd000-0xd003]
>pci 0000:02:00.1: reg 20: [io  0xcc00-0xcc0f]
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:0e.0: PCI bridge to [bus 02-02]
>pci 0000:00:0e.0:   bridge window [io  0xc000-0xdfff]
>pci 0000:00:0e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:0e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:00.0: [10de:0292] type 0 class 0x000300
>pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
>pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:03:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
>pci 0000:03:00.0: reg 24: [io  0xbc00-0xbc7f]
>pci 0000:03:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:0f.0: PCI bridge to [bus 03-03]
>pci 0000:00:0f.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:0f.0:   bridge window [mem 0xfa000000-0xfcffffff]
>pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>pci0000:00: Requesting ACPI _OSC control (0x1d)
>pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:03:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f000 - 000000000009ffff 
>reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff 
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0xbff00000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x1000-0x107f]
>pnp 00:01: [io  0x1080-0x10ff]
>pnp 00:01: [io  0x1400-0x147f]
>pnp 00:01: [io  0x1480-0x14ff]
>pnp 00:01: [io  0x1800-0x187f]
>pnp 00:01: [io  0x1880-0x18ff]
>system 00:01: [io  0x1000-0x107f] has been reserved
>system 00:01: [io  0x1080-0x10ff] has been reserved
>system 00:01: [io  0x1400-0x147f] has been reserved
>system 00:01: [io  0x1480-0x14ff] has been reserved
>system 00:01: [io  0x1800-0x187f] has been reserved
>system 00:01: [io  0x1880-0x18ff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x0010-0x001f]
>pnp 00:02: [io  0x0022-0x003f]
>pnp 00:02: [io  0x0044-0x005f]
>pnp 00:02: [io  0x0062-0x0063]
>pnp 00:02: [io  0x0065-0x006f]
>pnp 00:02: [io  0x0074-0x007f]
>pnp 00:02: [io  0x0091-0x0093]
>pnp 00:02: [io  0x00a2-0x00bf]
>pnp 00:02: [io  0x00e0-0x00ef]
>pnp 00:02: [io  0x04d0-0x04d1]
>pnp 00:02: [io  0x0800-0x087f]
>pnp 00:02: [io  0x0290-0x0297]
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>system 00:02: [io  0x0800-0x087f] has been reserved
>system 00:02: [io  0x0290-0x0297] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [irq 0 disabled]
>pnp 00:04: [irq 8]
>pnp 00:04: [mem 0xfefff000-0xfefff3ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x0070-0x0073]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [io  0x0061]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:07: [io  0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [mem 0xf0000000-0xf3ffffff]
>system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [mem 0x000d2800-0x000d3fff]
>pnp 00:09: [mem 0x000f0000-0x000f7fff]
>pnp 00:09: [mem 0x000f8000-0x000fbfff]
>pnp 00:09: [mem 0x000fc000-0x000fffff]
>pnp 00:09: [mem 0xfefff000-0xfefff0ff]
>pnp 00:09: [mem 0xbfee0000-0xbfefffff]
>pnp 00:09: [mem 0xffff0000-0xffffffff]
>pnp 00:09: [mem 0x00000000-0x0009ffff]
>pnp 00:09: [mem 0x00100000-0xbfedffff]
>pnp 00:09: [mem 0xfec00000-0xfec00fff]
>pnp 00:09: [mem 0xfee00000-0xfeefffff]
>pnp 00:09: [mem 0xfefff000-0xfeffffff]
>pnp 00:09: [mem 0xfff80000-0xfff80fff]
>pnp 00:09: [mem 0xfff90000-0xfffbffff]
>pnp 00:09: [mem 0xfffed000-0xfffeffff]
>system 00:09: [mem 0x000d2800-0x000d3fff] has been reserved
>system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:09: [mem 0xfefff000-0xfefff0ff] has been reserved
>system 00:09: [mem 0xbfee0000-0xbfefffff] could not be reserved
>system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:09: [mem 0x00100000-0xbfedffff] could not be reserved
>system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:09: [mem 0xfefff000-0xfeffffff] could not be reserved
>system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
>system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
>system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:06.0: PCI bridge to [bus 01-01]
>pci 0000:00:06.0:   bridge window [io  disabled]
>pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:06.0:   bridge window [mem pref disabled]
>pci 0000:00:0e.0: PCI bridge to [bus 02-02]
>pci 0000:00:0e.0:   bridge window [io  0xc000-0xdfff]
>pci 0000:00:0e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:0e.0:   bridge window [mem pref disabled]
>pci 0000:00:0f.0: PCI bridge to [bus 03-03]
>pci 0000:00:0f.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:0f.0:   bridge window [mem 0xfa000000-0xfcffffff]
>pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
>pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:01: resource 8 [mem 0xbff00000-0xfebfffff]
>pci_bus 0000:02: resource 0 [io  0xc000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfcffffff]
>pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:05.1: Enabling HT MSI Mapping
>pci 0000:00:05.2: Enabling HT MSI Mapping
>pci 0000:00:06.0: Enabling HT MSI Mapping
>pci 0000:00:06.1: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:03:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 5488k freed
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ b4000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>audit: initializing netlink socket (disabled)
>type=2000 audit(1314691246.825:1): initialized
>msgmni has been set to 11952
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:0e.0: setting latency timer to 64
>pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:0f.0: setting latency timer to 64
>pcieport 0000:00:0f.0: irq 41 for MSI/MSI-X
>ERST: Table is not found!
>ahci 0000:02:00.0: version 3.0
>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
>ahci 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ahci 0000:02:00.0: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
>ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
>sata_nv 0000:00:05.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:05.0: Using SWNCQ mode
>sata_nv 0000:00:05.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 23
>ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 23
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:05.1: Using SWNCQ mode
>sata_nv 0000:00:05.1: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 22
>ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 22
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
>sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:05.2: Using SWNCQ mode
>sata_nv 0000:00:05.2: setting latency timer to 64
>scsi6 : sata_nv
>scsi7 : sata_nv
>ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 21
>ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 21
>pata_amd 0000:00:04.0: version 0.4.1
>pata_amd 0000:00:04.0: setting latency timer to 64
>scsi8 : pata_amd
>scsi9 : pata_amd
>ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>ata9: port disabled. ignoring.
>pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
>ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
>pata_acpi 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
>pata_acpi 0000:02:00.1: setting latency timer to 64
>pata_acpi 0000:02:00.1: PCI INT B disabled
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP cubic registered
>ata2: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link down (SStatus 0 SControl 300)
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
>ata5.00: configured for UDMA/100
>ata3.00: ATA-7: SAMSUNG SP2504C, VT100-52, max UDMA7
>ata3.00: 488281250 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: ST31000333AS, SD35, max UDMA/133
>ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST31000333AS     SD35 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-2: new low speed USB device number 2 using ohci_hcd
>sdb: sdb1 sdb2 sdb3 sdb4
>sd 2:0:0:0: [sdb] Attached SCSI disk
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0
>logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
>logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input1
>logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5
>scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203D  SB00 PQ: 0 ANSI: 5
>usb 2-3: new low speed USB device number 3 using ohci_hcd
>input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
>generic-usb 0003:045E:00A4.0003: input: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:02.0-3/input0
>ata6: SATA link down (SStatus 0 SControl 300)
>usb 2-4: new low speed USB device number 4 using ohci_hcd
>ata8: SATA link down (SStatus 0 SControl 300)
>ata10: port disabled. ignoring.
>registered taskstats version 1
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 432k freed
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
>NET: Registered protocol family 1
>udevd[732]: starting version 171
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
>generic-usb 0003:413C:2003.0004: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-4/input0
>sr0: scsi3-mmc drive: 62x/62x cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 4:0:0:0: Attached scsi CD-ROM sr1
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>firewire_ohci 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:01:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>dracut: Scanning devices sdb4  for LVM volume groups 
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "ernie" using metadata type lvm2
>dracut: /dev/mapper/ernie-usr not set up by udev: Falling back to direct node creation.
>dracut: /dev/mapper/ernie-opt not set up by udev: Falling back to direct node creation.
>dracut: /dev/mapper/ernie-home not set up by udev: Falling back to direct node creation.
>dracut: /dev/mapper/ernie-portage not set up by udev: Falling back to direct node creation.
>dracut: /dev/mapper/ernie-resume not set up by udev: Falling back to direct node creation.
>dracut: The link /dev/ernie/usr should had been created by udev but it was not found. Falling back to direct link creation.
>dracut: The link /dev/ernie/opt should had been created by udev but it was not found. Falling back to direct link creation.
>dracut: The link /dev/ernie/home should had been created by udev but it was not found. Falling back to direct link creation.
>dracut: The link /dev/ernie/portage should had been created by udev but it was not found. Falling back to direct link creation.
>dracut: The link /dev/ernie/resume should had been created by udev but it was not found. Falling back to direct link creation.
>dracut: 5 logical volume(s) in volume group "ernie" now active
>firewire_core: created device fw0: GUID 0011d800013a04f8, S400
>PM: Starting manual resume from disk
>EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Checking ext4: /dev/disk/by-uuid/3e693134-6c43-424c-a0b8-5d0404cda934
>dracut: issuing e2fsck -a  /dev/disk/by-uuid/3e693134-6c43-424c-a0b8-5d0404cda934
>dracut: /dev/disk/by-uuid/3e693134-6c43-424c-a0b8-5d0404cda934: clean, 62833/274720 files, 737841/1098752 blocks
>dracut: Remounting /dev/disk/by-uuid/3e693134-6c43-424c-a0b8-5d0404cda934 with -o noatime,nodev,ro
>EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Mounted root filesystem /dev/sdb3
>dracut: Switching root
>udevd[1464]: starting version 171
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sr 3:0:0:0: Attached scsi generic sg2 type 5
>sr 4:0:0:0: Attached scsi generic sg3 type 5
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN] (on)
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110413/nspredef-456)
>ACPI: [Package] has zero elements (ffff8801b8429040)
>ACPI: Invalid passive threshold
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>wmi: Mapper loaded
>MCE: In-kernel MCE decoding enabled.
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:08.0: setting latency timer to 64
>ACPI: acpi_idle registered with cpuidle
>r8712u: module is from the staging directory, the quality is unknown, you have been warned.
>r8712u: DriverVersion: v7_0.20100831
>r8712u: register rtl8712_netdev_ops to netdev_ops
>r8712u: USB_SPEED_HIGH with 4 endpoints
>r8712u: Boot from EFUSE: Autoload OK
>EDAC MC: Ver: 2.1.0
>AMD64 EDAC driver v3.4.0
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>nouveau 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:03:00.0: setting latency timer to 64
>[drm] nouveau 0000:03:00.0: Detected an NV40 generation card (0x049200a2)
>[drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:03:00.0: ... appears to be valid
>[drm] nouveau 0000:03:00.0: BIT BIOS found
>[drm] nouveau 0000:03:00.0: Bios version 05.71.22.42
>[drm] nouveau 0000:03:00.0: TMDS table version 1.1
>[drm] nouveau 0000:03:00.0: TMDS table script pointers not stubbed
>[drm] nouveau 0000:03:00.0: BIT table 'd' not found
>[drm] nouveau 0000:03:00.0: Found Display Configuration Block version 3.0
>[drm] nouveau 0000:03:00.0: Raw DCB entry 0: 01000300 00000028
>[drm] nouveau 0000:03:00.0: Raw DCB entry 1: 03000302 00000000
>[drm] nouveau 0000:03:00.0: Raw DCB entry 2: 04011310 00000028
>[drm] nouveau 0000:03:00.0: Raw DCB entry 3: 0c011312 00000000
>[drm] nouveau 0000:03:00.0: Raw DCB entry 4: 020223f1 00c0c080
>[drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x30 5 10 2
>[drm] nouveau 0000:03:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
>[drm] nouveau 0000:03:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
>[drm] nouveau 0000:03:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
>[drm] nouveau 0000:03:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
>[drm] nouveau 0000:03:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
>[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xD1D8
>[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xDACB
>[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE4F9
>[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xE674
>[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xE7D0
>[drm] nouveau 0000:03:00.0: timingset 255 does not exist
>[drm] nouveau 0000:03:00.0: timingset 255 does not exist
>r8712u: CustomerID = 0x0000
>r8712u: MAC Address from efuse = 00:08:54:9f:05:df
>usbcore: registered new interface driver r8712u
>[drm] nouveau 0000:03:00.0: 2 available performance level(s)
>[drm] nouveau 0000:03:00.0: 0: memory 660MHz core 450MHz voltage 1250mV fanspeed 30%
>[drm] nouveau 0000:03:00.0: 1: memory 660MHz core 450MHz voltage 1250mV fanspeed 60%
>[drm] nouveau 0000:03:00.0: c: memory 702MHz core 550MHz
>[TTM] Zone  kernel: Available graphics memory: 3060074 kiB.
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[TTM] Initializing pool allocator.
>[drm] nouveau 0000:03:00.0: Detected 256MiB VRAM
>[drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
>[drm] nouveau 0000:03:00.0: Saving VGA fonts
>forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:d7:c5:1d
>forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
>forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
>forcedeth 0000:00:09.0: setting latency timer to 64
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on vga encoder (output 2)
>[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on tmds encoder (output 3)
>[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on TV encoder (output 4)
>[drm] nouveau 0000:03:00.0: allocated 1680x1050 fb: 0x49000, bo ffff8801b6b71000
>fbcon: nouveaufb (fb0) is primary device
>[drm] nouveau 0000:03:00.0: 0xC5B5: Parsing digital output script table
>[drm] nouveau 0000:03:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:03:00.0: Output DVI-I-1 is running on CRTC 0 using output A
>Console: switching to colour frame buffer device 210x65
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0
>forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1a:92:d8:be:d4
>forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
>EDAC amd64: DRAM ECC disabled.
>EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>(Note that use of the override may cause unknown side effects.)
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
>hda_intel: msi for device 1043:81f6 set to 0
>HDA Intel 0000:00:06.1: setting latency timer to 64
>uvesafb: NVIDIA Corporation, G71 Board - p455h7f-UQF, Chip Rev   , OEM: NVIDIA, VBE v3.0
>uvesafb: VBIOS/hardware supports DDC2 transfers
>uvesafb: monitor limits: vf = 75 Hz, hf = 82 kHz, clk = 170 MHz
>uvesafb: scrolling: redraw
>mtrr: type mismatch for e0000000,1000000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,800000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,400000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,200000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,100000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,80000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,40000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,20000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,10000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,8000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,4000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,2000 old: write-combining new: write-through
>mtrr: type mismatch for e0000000,1000 old: write-combining new: write-through
>uvesafb: framebuffer at 0xe0000000, mapped to 0xffffc90006800000, using 10240k, total 262144k
>fb1: VESA VGA frame buffer device
>NET: Registered protocol family 10
>loop: module loaded
>kvm: Nested Virtualization enabled
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
>powernow-k8: fid 0x12 (2600 MHz), vid 0x8
>powernow-k8: fid 0x10 (2400 MHz), vid 0xa
>powernow-k8: fid 0xe (2200 MHz), vid 0xc
>powernow-k8: fid 0xc (2000 MHz), vid 0xe
>powernow-k8: fid 0xa (1800 MHz), vid 0x10
>powernow-k8: fid 0x2 (1000 MHz), vid 0x12
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=1 offMin=0x640a offMax=0x640a
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000).
>EXT4-fs (sdb3): re-mounted. Opts: (null)
>EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>fuse init (API version 7.16)
>vboxguest: no symbol version for module_layout
>vboxguest: no symbol version for module_layout
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
>r8712u: 1 RCR=0x153f00e
>r8712u: 2 RCR=0x553f00e
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>forcedeth 0000:00:08.0: irq 42 for MSI/MSI-X
>forcedeth 0000:00:08.0: eth0: no link during initialization
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>forcedeth 0000:00:09.0: irq 43 for MSI/MSI-X
>forcedeth 0000:00:09.0: eth1: no link during initialization
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>NET: Registered protocol family 17
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>r8712u: [r8712_got_addbareq_event_callback] mac = bc:05:43:ba:ce:25, seq = 48, tid = 0
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata3.00: configured for UDMA/133
>ata3: EH complete
>wlan0: no IPv6 routers present
>EXT4-fs (sdb3): re-mounted. Opts: commit=0
>EXT4-fs (dm-0): re-mounted. Opts: commit=0
>EXT4-fs (dm-1): re-mounted. Opts: commit=0
>EXT4-fs (dm-2): re-mounted. Opts: commit=0
>chrome_sandbox (3952): /proc/3950/oom_adj is deprecated, please use /proc/3950/oom_score_adj instead.
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=91.215.100.145 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=51019 WINDOW=0 RES=0x00 RST URGP=0 
>[drm] nouveau 0000:03:00.0: Setting dpms mode 1 on tmds encoder (output 1)
>[drm] nouveau 0000:03:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=93.184.220.90 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=0 DF PROTO=TCP SPT=80 DPT=34735 WINDOW=0 RES=0x00 RST URGP=0 
>EXT4-fs (dm-0): re-mounted. Opts: (null)
>warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
>[drm] nouveau 0000:03:00.0: PGRAPH - ERROR nsource: LIMIT_COLOR nstatus: PROTECTION_FAULT
>[drm] nouveau 0000:03:00.0: PGRAPH - ch 6 (0x001bf000) subc 5 class 0x009f mthd 0x0308 data 0x002f0400
>r8712u: [r8712_got_addbareq_event_callback] mac = bc:05:43:ba:ce:25, seq = 0, tid = 6
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21888 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31868 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31869 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21889 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31870 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21890 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31871 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21891 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31872 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>[drm] nouveau 0000:03:00.0: Failed to idle channel 6.
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: Failed: Instance=0x0001bf00 Save=1
>[drm] nouveau 0000:03:00.0: IP: 0x28, Opcode: 0x00500060
>[drm] nouveau 0000:03:00.0: 0x40030C = 0x00000029
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21892 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31873 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21893 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31874 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21894 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31875 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21895 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=31876 PROTO=TCP SPT=80 DPT=53166 WINDOW=0 RES=0x00 RST URGP=0 
>4-invalid: IN=wlan0 OUT= MAC=00:08:54:9f:05:df:bc:05:43:ba:ce:26:08:00 SRC=74.125.43.106 DST=192.168.178.34 LEN=40 TOS=0x00 PREC=0x00 TTL=48 ID=21896 PROTO=TCP SPT=443 DPT=38591 WINDOW=0 RES=0x00 RST URGP=0 
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PFIFO_DMA_PUSHER - Ch 1 Get 0x00012000 Put 0x000110a0 State 0x80000000 (err: INVALID_CMD) Push 0x00000000
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:03:00.0: 0xC5B5: Parsing digital output script table
>[drm] nouveau 0000:03:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:03:00.0: Output DVI-I-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 2.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: Failed to idle channel 1.
>[drm] nouveau 0000:03:00.0: GPU lockup - switching to software fbcon
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>[drm] nouveau 0000:03:00.0: PGRAPH idle timed out with status 0x0b800181
>r8712u: [r8712_got_addbareq_event_callback] mac = bc:05:43:ba:ce:25, seq = 48, tid = 0

Actions: View

Attachments on bug 40485: 50680 | 50681 | 50682 | 50683 | 50684 | 50686 | 51601

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.