Attachment 5215 Details for Bug 6383 – my xorg.conf file

my xorg.conf file

xorg.conf (text/plain), 14.77 KB, created by Raphael Burnes on 2006-04-07 09:48:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Raphael Burnes

Created: 2006-04-07 09:48:51 UTC

Size: 14.77 KB

patch

obsolete

># File generated by xorgconfig.
>
>#
># Copyright 2004 The X.Org Foundation
>#
># Permission is hereby granted, free of charge, to any person obtaining a
># copy of this software and associated documentation files (the "Software"),
># to deal in the Software without restriction, including without limitation
># the rights to use, copy, modify, merge, publish, distribute, sublicense,
># and/or sell copies of the Software, and to permit persons to whom the
># Software is furnished to do so, subject to the following conditions:
># 
># The above copyright notice and this permission notice shall be included in
># all copies or substantial portions of the Software.
># 
># THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
># IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
># FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
># The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
># WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
># OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
># SOFTWARE.
># 
># Except as contained in this notice, the name of The X.Org Foundation shall
># not be used in advertising or otherwise to promote the sale, use or other
># dealings in this Software without prior written authorization from
># The X.Org Foundation.
>#
>
># **********************************************************************
># Refer to the xorg.conf(5x) man page for details about the format of 
># this file.
># **********************************************************************
>
># **********************************************************************
># Module section -- this  section  is used to specify
># which dynamically loadable modules to load.
># **********************************************************************
>#
>Section "Module"
>
># This loads the DBE extension module.
>
>    Load        "dbe"  	# Double buffer extension
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>    SubSection  "extmod"
>      Option    "omit xfree86-dga"   # don't initialise the DGA extension
>    EndSubSection
>
># This loads the font modules
>#    Load        "type1"
>#    Load        "speedo"
>    Load        "freetype"
>#    Load        "xtt"
>
># This loads the GLX module
>#    Load       "glx"
># This loads the DRI module
>#    Load       "dri"
>
>EndSection
>
># **********************************************************************
># Files section.  This allows default font and rgb paths to be set
># **********************************************************************
>
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
>
>    RgbPath	"/usr/share/X11/rgb"
>
># Multiple FontPath entries are allowed (which are concatenated together),
># as well as specifying multiple comma-separated entries in one FontPath
># command (or a combination of both methods)
># 
># 
>
>    FontPath   "/usr/share/fonts/misc"
>#    FontPath   "/usr/share/fonts/75dpi"
>#    FontPath   "/usr/share/fonts/100dpi"
>    FontPath   "/usr/share/fonts/TTF"
>    FontPath   "/usr/share/fonts/Type1"
>#    FontPath   "/usr/lib/X11/fonts/local/"
>#    FontPath   "/usr/lib/X11/fonts/misc/"
>#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
>#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
>#    FontPath   "/usr/lib/X11/fonts/Speedo/"
>#    FontPath   "/usr/lib/X11/fonts/Type1/"
>#    FontPath   "/usr/lib/X11/fonts/TrueType/"
>#    FontPath   "/usr/lib/X11/fonts/freefont/"
>#    FontPath   "/usr/lib/X11/fonts/75dpi/"
>#    FontPath   "/usr/lib/X11/fonts/100dpi/"
>
># The module search path.  The default path is shown here.
>
>#    ModulePath "/usr/lib/modules"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
># Uncomment this to cause a core dump at the spot where a signal is 
># received.  This may leave the console in an unusable state, but may
># provide a better stack trace in the core dump to aid in debugging
>
>#    Option "NoTrapSignals"
>
># Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
># (where n is 1 through 12).  This allows clients to receive these key
># events.
>
>#    Option "DontVTSwitch"
>
># Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
># This allows clients to receive this key event.
>
>#    Option "DontZap"
>
># Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
># sequences.  This allows clients to receive these key events.
>
>#    Option "Dont Zoom"
>
># Uncomment this to disable tuning with the xvidtune client. With
># it the client can still run and fetch card and monitor attributes,
># but it will not be allowed to change them. If it tries it will
># receive a protocol error.
>
>#    Option "DisableVidModeExtension"
>
># Uncomment this to enable the use of a non-local xvidtune client. 
>
>#    Option "AllowNonLocalXvidtune"
>
># Uncomment this to disable dynamically modifying the input device
># (mouse and keyboard) settings. 
>
>#    Option "DisableModInDev"
>
># Uncomment this to enable the use of a non-local client to
># change the keyboard or mouse settings (currently only xset).
>
>#    Option "AllowNonLocalModInDev"
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Core keyboard's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier	"Keyboard1"
>    Driver	"kbd"
>
># For most OSs the protocol can be omitted (it defaults to "Standard").
># When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
># uncomment the following line.
>
>#    Option     "Protocol"      "Xqueue"
>
>    Option "AutoRepeat" "500 30"
>
># Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>#    Option	"Xleds"      "1 2 3"
>
>#    Option "LeftAlt"     "Meta"
>#    Option "RightAlt"    "ModeShift"
>
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a non-U.S.
># keyboard, you will probably want to use:
>#    Option "XkbModel"    "pc105"
># If you have a US Microsoft Natural keyboard, you can use:
>#    Option "XkbModel"    "microsoft"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#    Option "XkbLayout"   "de"
># or:
>#    Option "XkbLayout"   "de"
>#    Option "XkbVariant"  "nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#    Option "XkbOptions"  "ctrl:swapcaps"
>
># These are the default XKB settings for Xorg
>#    Option "XkbRules"    "xorg"
>#    Option "XkbModel"    "pc105"
>#    Option "XkbLayout"   "us"
>#    Option "XkbVariant"  ""
>#    Option "XkbOptions"  ""
>
>#    Option "XkbDisable"
>
>    Option "XkbRules"	"xorg"
>    Option "XkbModel"	"pc104"
>    Option "XkbLayout"	"us"
>
>EndSection
>
>
># **********************************************************************
># Core Pointer's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
># Identifier and driver
>
>    Identifier	"Mouse1"
>    Driver	"mouse"
>    Option "Protocol"    "Auto"	# Auto detect
>    Option "Device"      "/dev/input/usbmouse"
>
># When using XQUEUE, comment out the above two lines, and uncomment
># the following line.
>
>#    Option "Protocol"	"Xqueue"
>
># Mouse-speed setting for PS/2 mouse.
>
>#    Option "Resolution"	"256"
>
># Baudrate and SampleRate are only for some Logitech mice. In
># almost every case these lines should be omitted.
>
>#    Option "BaudRate"	"9600"
>#    Option "SampleRate"	"150"
>
># Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
># horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
># 3 buttons and you need to map the wheel to different button ids to avoid
># conflicts.
>
>    Option "ZAxisMapping"   "4 5 6 7"
>
># Emulate3Buttons is an option for 2-button mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
>#    Option "Emulate3Buttons"
>#    Option "Emulate3Timeout"    "50"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
>#    Option "ChordMiddle"
>
>EndSection
>
>
># **********************************************************************
># Other input device sections 
># this is optional and is required only if you
># are using extended input devices.  This is for example only.  Refer
># to the xorg.conf man page for a description of the options.
># **********************************************************************
>#
># Section "InputDevice" 
>#    Identifier  "Mouse2"
>#    Driver      "mouse"
>#    Option      "Protocol"      "MouseMan"
>#    Option      "Device"        "/dev/mouse2"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "spaceball"
>#    Driver     "magellan"
>#    Option     "Device"        "/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "spaceball2"
>#    Driver     "spaceorb"
>#    Option     "Device"        "/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "touchscreen0"
>#    Driver     "microtouch"
>#    Option     "Device"        "/dev/ttyS0"
>#    Option     "MinX"          "1412"
>#    Option     "MaxX"          "15184"
>#    Option     "MinY"          "15372"
>#    Option     "MaxY"          "1230"
>#    Option     "ScreenNumber"  "0"
>#    Option     "ReportingMode" "Scaled"
>#    Option     "ButtonNumber"  "1"
>#    Option     "SendCoreEvents"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "touchscreen1"
>#    Driver     "elo2300"
>#    Option     "Device"        "/dev/ttyS0"
>#    Option     "MinX"          "231"
>#    Option     "MaxX"          "3868"
>#    Option     "MinY"          "3858"
>#    Option     "MaxY"          "272"
>#    Option     "ScreenNumber"  "0"
>#    Option     "ReportingMode" "Scaled"
>#    Option     "ButtonThreshold"       "17"
>#    Option     "ButtonNumber"  "1"
>#    Option     "SendCoreEvents"
># EndSection
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>
>    Identifier  "My Monitor"
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>    HorizSync   31.5
>
>#    HorizSync	30-64         # multisync
>#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
>#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>    VertRefresh 50-70
>
>EndSection
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
># Any number of graphics device sections may be present
>
># Standard VGA Device:
>
>Section "Device"
>    Identifier	"Standard VGA"
>    VendorName	"Unknown"
>    BoardName	"Unknown"
>
># The chipset line is optional in most cases.  It can be used to override
># the driver's chipset detection, and should not normally be specified.
>
>#    Chipset	"generic"
>
># The Driver line must be present.  When using run-time loadable driver
># modules, this line instructs the server to load the specified driver
># module.  Even when not using loadable driver modules, this line
># indicates which driver should interpret the information in this section.
>
>    Driver     "vga"
># The BusID line is used to specify which of possibly multiple devices
># this section is intended for.  When this line isn't present, a device
># section can only match up with the primary video device.  For PCI
># devices a line like the following could be used.  This line should not
># normally be included unless there is more than one video device
># intalled.
>
>#    BusID      "PCI:0:10:0"
>
>#    VideoRam	256
>
>#    Clocks	25.2 28.3
>
>EndSection
>
># Device configured by xorgconfig:
>
>Section "Device"
>    Identifier  "** Linux framebuffer (generic)        [fbdev]"
>    Driver      "fbdev"
>    #VideoRam    2048
>    # Insert Clocks lines here if appropriate
>EndSection
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
>Section "Screen"
>    Identifier  "Screen 1"
>    Device      "** Linux framebuffer (generic)        [fbdev]"
>    Monitor     "My Monitor"
>    DefaultDepth 16
>
>    Subsection "Display"
>        Depth       8
>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
># **********************************************************************
># ServerLayout sections.
># **********************************************************************
>
># Any number of ServerLayout sections may be present.  Each describes
># the way multiple screens are organised.  A specific ServerLayout
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
>
>Section "ServerLayout"
>
># The Identifier line must be present
>    Identifier  "Simple Layout"
>
># Each Screen line specifies a Screen section name, and optionally
># the relative position of other screens.  The four names after
># primary screen name are the screens to the top, bottom, left and right
># of the primary screen.  In this example, screen 2 is located to the
># right of screen 1.
>
>    Screen "Screen 1"
>
># Each InputDevice line specifies an InputDevice section name and
># optionally some options to specify the way the device is to be
># used.  Those options include "CorePointer", "CoreKeyboard" and
># "SendCoreEvents".
>
>    InputDevice "Mouse1" "CorePointer"
>    InputDevice "Keyboard1" "CoreKeyboard"
>
>EndSection
>
># Section "DRI"
>#    Mode 0666
># EndSection
>

Actions: View

Attachments on bug 6383: 5214 | 5215

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.