Attachment 5392 Details for Bug 6672 – dmesg output

dmesg output

dmesg (text/plain), 24.46 KB, created by Simon Farnsworth on 2006-04-20 07:53:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Simon Farnsworth

Created: 2006-04-20 07:53:00 UTC

Size: 24.46 KB

patch

obsolete

>Linux version 2.6.17-rc1-mm2 (root@linux) (gcc version 3.4.6 (Gentoo 3.4.6, ssp-3.4.5-1.0, pie-8.7.9)) #1 PREEMPT Tue Apr 18 22:23:16 BST 2006
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009e800 end: 000000000009e800 type: 1
>copy_e820_map() type is E820_RAM
>add_memory_region(0000000000000000, 000000000009e800, 1)
>copy_e820_map() start: 000000000009e800 size: 0000000000001800 end: 00000000000a0000 type: 2
>add_memory_region(000000000009e800, 0000000000001800, 2)
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>add_memory_region(00000000000f0000, 0000000000010000, 2)
>copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
>copy_e820_map() type is E820_RAM
>add_memory_region(0000000000100000, 000000003fef0000, 1)
>copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
>add_memory_region(000000003fff0000, 0000000000003000, 4)
>copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
>add_memory_region(000000003fff3000, 000000000000d000, 3)
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>add_memory_region(00000000fec00000, 0000000000001000, 2)
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>add_memory_region(00000000fee00000, 0000000000001000, 2)
>copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
>add_memory_region(00000000ffff0000, 0000000000010000, 2)
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>1023MB LOWMEM available.
>found SMP MP-table at 000f5e30
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 258032 pages, LIFO batch:31
>DMI 2.2 present.
>ACPI: RSDP (v000 VIA694                                ) @ 0x000f7840
>ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
>ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
>ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7200
>ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 1470.058 MHz processor.
>Built 1 zonenists
>Kernel command line: root=/dev/evms/root ro ramdisk_size=8192 elevator=cfq
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=b042e000 soft=b042d000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032256k/1048512k available (2194k kernel code, 15640k reserved, 848k data, 184k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2940.78 BogoMIPS (lpj=1470390)
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Athlon(tm) XP 1700+ stepping 01
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 0k freed
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 3126k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
>ACPI: Subsystem revision 20060310
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 4000-407f claimed by vt8235 PM
>PCI quirk: region 5000-500f claimed by vt8235 SMB
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Bluetooth: Core ver 2.8
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Setting up standard PCI resources
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>Machine check exception polling timer started.
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler cfq registered (default)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Fan [FAN] (on)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (38 C)
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA KT266/KY266x/KT333 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized radeon 1.24.0 20060225 on minor 0
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>ACPI (acpi_bus-0216): Device 'LAN0' is not power manageable [20060310]
>ACPI Warning (pci_link-0408): PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [20060310]
>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17
>PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 1
>eth0: VIA Rhine II at 0xeb00d000, 00:04:61:42:f5:92, IRQ 17.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>HPT374: IDE controller at PCI slot 0000:00:0e.0
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 18
>HPT374: chipset revision 7
>HPT374: 100% native mode on irq 18
>HPT37X: using 33MHz PCI clock
>    ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
>HPT37X: using 33MHz PCI clock
>    ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:pio
>ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 17 (level, low) -> IRQ 18
>HPT37X: using 33MHz PCI clock
>    ide4: BM-DMA at 0xd000-0xd007, BIOS settings: hdi:pio, hdj:pio
>HPT37X: using 33MHz PCI clock
>    ide5: BM-DMA at 0xd008-0xd00f, BIOS settings: hdk:pio, hdl:pio
>Probing IDE interface ide2...
>hde: WDC WD1200JB-00CRA1, ATA DISK drive
>ide2 at 0xac00-0xac07,0xb002 on irq 18
>Probing IDE interface ide3...
>hdg: WDC WD1200JB-00GVA0, ATA DISK drive
>ide3 at 0xb400-0xb407,0xb802 on irq 18
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI (acpi_bus-0216): Device 'IDE0' is not power manageable [20060310]
>ACPI Warning (pci_link-0408): PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [20060310]
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 19
>PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 3
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ATAPI DVD RW 8XMax, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hde: max request size: 128KiB
>hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
>hde: cache flushes not supported
> hde: hde1 hde2 hde3
>hdg: max request size: 512KiB
>hdg: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hdg: cache flushes supported
> hdg: hdg1 hdg2 hdg3
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdc: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33)
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 20
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940A Ultra SCSI adapter>
>        aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
>
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:09.2[B] -> GSI 18 (level, low) -> IRQ 21
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[eb00b000-eb00b7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:00:0a.3[A] -> GSI 18 (level, low) -> IRQ 21
>ehci_hcd 0000:00:0a.3: EHCI Host Controller
>ehci_hcd 0000:00:0a.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0a.3: debug port 1
>ehci_hcd 0000:00:0a.3: irq 21, io mem 0xeb007000
>ehci_hcd 0000:00:0a.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.17-rc1-mm2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:0a.3
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ACPI (acpi_bus-0216): Device 'USB9' is not power manageable [20060310]
>ACPI Warning (pci_link-0408): PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [20060310]
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22
>PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 6
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:10.3: irq 22, io mem 0xeb00c000
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.17-rc1-mm2 ehci_hcd
>usb usb2: SerialNumber: 0000:00:10.3
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:0a.0[B] -> GSI 19 (level, low) -> IRQ 20
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:0a.0: irq 20, io mem 0xeb004000
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.17-rc1-mm2 ohci_hcd
>usb usb3: SerialNumber: 0000:00:0a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:0a.1[C] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:0a.1: OHCI Host Controller
>ohci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:0a.1: irq 16, io mem 0xeb005000
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.17-rc1-mm2 ohci_hcd
>usb usb4: SerialNumber: 0000:00:0a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:0a.2[D] -> GSI 17 (level, low) -> IRQ 18
>ohci_hcd 0000:00:0a.2: OHCI Host Controller
>ohci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:0a.2: irq 18, io mem 0xeb006000
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.17-rc1-mm2 ohci_hcd
>usb usb5: SerialNumber: 0000:00:0a.2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI (acpi_bus-0216): Device 'USB6' is not power manageable [20060310]
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22
>PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 6
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:10.0: irq 22, io base 0x0000d400
>usb usb6: new device found, idVendor=0000, idProduct=0000
>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.17-rc1-mm2 uhci_hcd
>usb usb6: SerialNumber: 0000:00:10.0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI (acpi_bus-0216): Device 'USB7' is not power manageable [20060310]
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22
>PCI: Via IRQ fixup for 0000:00:10.1, from 12 to 6
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800
>usb usb7: new device found, idVendor=0000, idProduct=0000
>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.17-rc1-mm2 uhci_hcd
>usb usb7: SerialNumber: 0000:00:10.1
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>ACPI (acpi_bus-0216): Device 'USB8' is not power manageable [20060310]
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 22
>PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 6
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:10.2: irq 22, io base 0x0000dc00
>usb usb8: new device found, idVendor=0000, idProduct=0000
>usb usb8: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.17-rc1-mm2 uhci_hcd
>usb usb8: SerialNumber: 0000:00:10.2
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb 4-2: new low speed USB device using ohci_hcd and address 2
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c01510f6043]
>usb 4-2: new device found, idVendor=045e, idProduct=0038
>usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: SideWinder Precision 2 Joystick
>usb 4-2: Manufacturer: Microsoft
>usb 4-2: configuration #1 chosen from 1 choice
>usb 5-1: new full speed USB device using ohci_hcd and address 2
>usb 5-1: new device found, idVendor=04e8, idProduct=300c
>usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: Samsung Laser Printer ML-1200 Series
>usb 5-1: Manufacturer: Samsung Electronics Co., Ltd.
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-2: new full speed USB device using ohci_hcd and address 3
>usb 5-2: new device found, idVendor=0a5c, idProduct=2033
>usb 5-2: new device strings: Mfr=0, Product=0, SerialNumber=0
>usb 5-2: configuration #1 chosen from 1 choice
>usb 6-1: new low speed USB device using uhci_hcd and address 2
>usb 6-1: new device found, idVendor=046d, idProduct=c504
>usb 6-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-1: Product: USB Receiver
>usb 6-1: Manufacturer: Logitech
>usb 6-1: configuration #1 chosen from 1 choice
>usb 6-2: new full speed USB device using uhci_hcd and address 3
>usb 6-2: new device found, idVendor=04b8, idProduct=011d
>usb 6-2: new device strings: Mfr=64, Product=77, SerialNumber=0
>usb 6-2: Product: EPSON Scanner
>usb 6-2: Manufacturer: EPSON
>usb 6-2: configuration #1 chosen from 1 choice
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300C
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>input: Microsoft SideWinder Precision 2 Joystick as /class/input/input0
>input: USB HID v1.10 Joystick [Microsoft SideWinder Precision 2 Joystick] on usb-0000:00:0a.1-2
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-1
>input: Logitech USB Receiver as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>i2c-pca-isa: i/o base 0x000330. irq 10
>md: raid1 personality registered for level 1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new driver hci_usb
>Bluetooth: Broadcom Blutonium firmware driver ver 1.0
>input: AT Translated Set 2 keyboard as /class/input/input3
>bcm203x_probe: Mini driver request failed
>bcm203x: probe of 5-2:1.0 failed with error -5
>usbcore: registered new driver bcm203x
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>TCP bic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.5
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.7
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Using IPI Shortcut mode
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Time: tsc clocksource has been installed.
>RAMDISK: Compressed image found at block 0
>Time: acpi_pm clocksource has been installed.
>VFS: Mounted root (ext2 filesystem).
>md: bind<dm-0>
>md: bind<dm-1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: bind<dm-3>
>md: bind<dm-4>
>raid1: raid set md1 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Freeing unused kernel memory: 184k freed
>Linux video capture interface: v1.00
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 21
>bttv0: Bt878 (rev 2) at 0000:00:0c.0, irq: 21, latency: 32, mmio: 0xeb008000
>bttv0: detected: (Askey Magic/others) TView99 CPH05x [card=24], PCI subsystem ID is 144f:3002
>bttv0: using: Askey CPH05X/06X (bt878) [many vendors] [card=24,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00feffff [init]
>bttv0: radio detected by subsystem id (CPH05x)
>bttv0: using tuner=-1
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>input: bttv IR (card=24) as /class/input/input4
>bttv-input: bttv IR (card=24) detected at pci-0000:00:0c.0/ir0
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
>Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>ACPI Warning (pci_link-0408): PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [20060310]
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23
>PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 7
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
>Adding 1953492k swap on /dev/evms/swap0.  Priority:1 extents:1 across:1953492k
>Adding 1953492k swap on /dev/evms/swap1.  Priority:1 extents:1 across:1953492k
>EXT3 FS on dm-10, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-18, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-20, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-16, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>mtrr: 0xd0000000,0x10000000 overlaps existing 0xd0000000,0x8000000
>mtrr: 0xd0000000,0x10000000 overlaps existing 0xd0000000,0x8000000
>mtrr: 0xd0000000,0x10000000 overlaps existing 0xd0000000,0x8000000
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 1 usecs
>usb 4-2: USB disconnect, address 2

Actions: View

Attachments on bug 6672: 5390 | 5391 | 5392 | 5393 | 5394 | 5397 | 5400

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.