Attachment 54033 Details for Bug 43379 – dmesg output from test #1

dmesg output from test #1

dmesg.ssc.lid-closed-at-poweron (text/plain), 83.62 KB, created by pfrank on 2011-12-01 11:16:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: pfrank

Created: 2011-12-01 11:16:23 UTC

Size: 83.62 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.1.4-gentoo (root@t520) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Wed Nov 30 16:52:31 CET 2011
>Command line: BOOT_IMAGE=/3.1.4/bzImage root=/dev/sda3 rootfstype=ext4 drm.debug=0xe i915.lvds_use_ssc=0
>Disabled fast string operations
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
> BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
> BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 00000000ba99f000 (usable)
> BIOS-e820: 00000000ba99f000 - 00000000bae9f000 (reserved)
> BIOS-e820: 00000000bae9f000 - 00000000baf9f000 (ACPI NVS)
> BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
> BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
> BIOS-e820: 00000000f80f8000 - 00000000f80f9000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013e600000 (usable)
>NX (Execute Disable) protection: active
>EFI v2.00 by Phoenix Technologies Ltd.
> ACPI=0xbaffe000  ACPI 2.0=0xbaffe014  SMBIOS=0xbae25000 
>Kernel-defined memdesc doesn't match the one from EFI!
>EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
>EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000054000) (0MB)
>EFI: mem02: type=4, attr=0xf, range=[0x0000000000054000-0x0000000000055000) (0MB)
>EFI: mem03: type=3, attr=0xf, range=[0x0000000000055000-0x000000000008f000) (0MB)
>EFI: mem04: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
>EFI: mem05: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
>EFI: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000411000) (3MB)
>EFI: mem07: type=7, attr=0xf, range=[0x0000000000411000-0x0000000086125000) (2141MB)
>EFI: mem08: type=2, attr=0xf, range=[0x0000000086125000-0x00000000b3da0000) (732MB)
>EFI: mem09: type=4, attr=0xf, range=[0x00000000b3da0000-0x00000000b3dc0000) (0MB)
>EFI: mem10: type=7, attr=0xf, range=[0x00000000b3dc0000-0x00000000b6203000) (36MB)
>EFI: mem11: type=4, attr=0xf, range=[0x00000000b6203000-0x00000000b6d90000) (11MB)
>EFI: mem12: type=7, attr=0xf, range=[0x00000000b6d90000-0x00000000b6f7f000) (1MB)
>EFI: mem13: type=1, attr=0xf, range=[0x00000000b6f7f000-0x00000000b6f9f000) (0MB)
>EFI: mem14: type=7, attr=0xf, range=[0x00000000b6f9f000-0x00000000b7bce000) (12MB)
>EFI: mem15: type=4, attr=0xf, range=[0x00000000b7bce000-0x00000000b7c28000) (0MB)
>EFI: mem16: type=7, attr=0xf, range=[0x00000000b7c28000-0x00000000b7c45000) (0MB)
>EFI: mem17: type=4, attr=0xf, range=[0x00000000b7c45000-0x00000000b7c57000) (0MB)
>EFI: mem18: type=7, attr=0xf, range=[0x00000000b7c57000-0x00000000b7c59000) (0MB)
>EFI: mem19: type=4, attr=0xf, range=[0x00000000b7c59000-0x00000000b7c5a000) (0MB)
>EFI: mem20: type=7, attr=0xf, range=[0x00000000b7c5a000-0x00000000b7c5b000) (0MB)
>EFI: mem21: type=4, attr=0xf, range=[0x00000000b7c5b000-0x00000000b7cb9000) (0MB)
>EFI: mem22: type=7, attr=0xf, range=[0x00000000b7cb9000-0x00000000b7cba000) (0MB)
>EFI: mem23: type=4, attr=0xf, range=[0x00000000b7cba000-0x00000000b821d000) (5MB)
>EFI: mem24: type=7, attr=0xf, range=[0x00000000b821d000-0x00000000b821f000) (0MB)
>EFI: mem25: type=4, attr=0xf, range=[0x00000000b821f000-0x00000000b8222000) (0MB)
>EFI: mem26: type=7, attr=0xf, range=[0x00000000b8222000-0x00000000b8223000) (0MB)
>EFI: mem27: type=4, attr=0xf, range=[0x00000000b8223000-0x00000000b823e000) (0MB)
>EFI: mem28: type=7, attr=0xf, range=[0x00000000b823e000-0x00000000b823f000) (0MB)
>EFI: mem29: type=4, attr=0xf, range=[0x00000000b823f000-0x00000000b9f9f000) (29MB)
>EFI: mem30: type=7, attr=0xf, range=[0x00000000b9f9f000-0x00000000ba267000) (2MB)
>EFI: mem31: type=2, attr=0xf, range=[0x00000000ba267000-0x00000000ba26d000) (0MB)
>EFI: mem32: type=3, attr=0xf, range=[0x00000000ba26d000-0x00000000ba99f000) (7MB)
>EFI: mem33: type=5, attr=0x800000000000000f, range=[0x00000000ba99f000-0x00000000baacb000) (1MB)
>EFI: mem34: type=5, attr=0x800000000000000f, range=[0x00000000baacb000-0x00000000bab9f000) (0MB)
>EFI: mem35: type=6, attr=0x800000000000000f, range=[0x00000000bab9f000-0x00000000bacaf000) (1MB)
>EFI: mem36: type=6, attr=0x800000000000000f, range=[0x00000000bacaf000-0x00000000bad9f000) (0MB)
>EFI: mem37: type=0, attr=0xf, range=[0x00000000bad9f000-0x00000000bae20000) (0MB)
>EFI: mem38: type=0, attr=0xf, range=[0x00000000bae20000-0x00000000bae9f000) (0MB)
>EFI: mem39: type=10, attr=0xf, range=[0x00000000bae9f000-0x00000000baedf000) (0MB)
>EFI: mem40: type=10, attr=0xf, range=[0x00000000baedf000-0x00000000baf9f000) (0MB)
>EFI: mem41: type=9, attr=0xf, range=[0x00000000baf9f000-0x00000000bafde000) (0MB)
>EFI: mem42: type=9, attr=0xf, range=[0x00000000bafde000-0x00000000bafff000) (0MB)
>EFI: mem43: type=4, attr=0xf, range=[0x00000000bafff000-0x00000000bb000000) (0MB)
>EFI: mem44: type=7, attr=0xf, range=[0x0000000100000000-0x000000013e600000) (998MB)
>EFI: mem45: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
>EFI: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
>DMI 2.6 present.
>DMI: LENOVO 42433UG/42433UG, BIOS 8AET41WW (1.21 ) 03/28/2011
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x13e600 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0FFC00000 mask FFFC00000 write-protect
>  1 base 000000000 mask F80000000 write-back
>  2 base 080000000 mask FC0000000 write-back
>  3 base 0BC000000 mask FFC000000 uncachable
>  4 base 0BB000000 mask FFF000000 uncachable
>  5 base 100000000 mask FC0000000 write-back
>  6 base 13F000000 mask FFF000000 uncachable
>  7 base 13E800000 mask FFF800000 uncachable
>  8 base 13E600000 mask FFFE00000 uncachable
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xbb000 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff880000098000] 98000 size 20480
>init_memory_mapping: 0000000000000000-00000000bb000000
> 0000000000 - 00bb000000 page 2M
>kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
>init_memory_mapping: 0000000100000000-000000013e600000
> 0100000000 - 013e600000 page 2M
>kernel direct mapping tables up to 13e600000 @ ba267000-ba26d000
>ACPI: RSDP 00000000baffe014 00024 (v02 LENOVO)
>ACPI: XSDT 00000000baffe120 000AC (v01 LENOVO TP-8A    00001210 PTEC 00000002)
>ACPI: FACP 00000000bafe9000 000F4 (v04 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: DSDT 00000000bafec000 0DDEF (v01 LENOVO TP-8A    00001210 INTL 20061109)
>ACPI: FACS 00000000baf2e000 00040
>ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-8A    00001210 PTEC 00000001)
>ACPI: SSDT 00000000baffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
>ACPI: SSDT 00000000baffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
>ACPI: SSDT 00000000baffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
>ACPI: HPET 00000000bafe8000 00038 (v01 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: APIC 00000000bafe7000 00098 (v01 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: MCFG 00000000bafe6000 0003C (v01 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: ECDT 00000000bafe5000 00052 (v01 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: ASF! 00000000bafeb000 000A5 (v32 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: TCPA 00000000bafe4000 00032 (v02    PTL   LENOVO 06040000 LNVO 00000001)
>ACPI: SSDT 00000000bafe3000 00B71 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
>ACPI: SSDT 00000000bafe2000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
>ACPI: DMAR 00000000bafe1000 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
>ACPI: UEFI 00000000bafe0000 0003E (v01 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: UEFI 00000000bafdf000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
>ACPI: UEFI 00000000bafde000 0027E (v01 LENOVO TP-8A    00001210 PTL  00000002)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000013e600000
>Initmem setup node 0 0000000000000000-000000013e600000
>  NODE_DATA [000000013e5fb000 - 000000013e5fffff]
> [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880139c00000-ffff88013dbfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0013e600
>Movable zone start PFN for each node
>early_node_map[5] active PFN ranges
>    0: 0x00000010 -> 0x0000008f
>    0: 0x00000090 -> 0x000000a0
>    0: 0x00000100 -> 0x000ba99f
>    0: 0x000bafff -> 0x000bb000
>    0: 0x00100000 -> 0x0013e600
>On node 0 totalpages: 1019695
>  DMA zone: 64 pages used for memmap
>  DMA zone: 10 pages reserved
>  DMA zone: 3909 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 743904 pages, LIFO batch:31
>  Normal zone: 3992 pages used for memmap
>  Normal zone: 251496 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 8 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000008f000 - 0000000000090000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>PM: Registered nosave memory: 00000000ba99f000 - 00000000bae9f000
>PM: Registered nosave memory: 00000000bae9f000 - 00000000baf9f000
>PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
>PM: Registered nosave memory: 00000000bb000000 - 00000000f80f8000
>PM: Registered nosave memory: 00000000f80f8000 - 00000000f80f9000
>PM: Registered nosave memory: 00000000f80f9000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 0000000100000000
>Allocating PCI resources starting at bb000000 (gap: bb000000:3d0f8000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>PERCPU: Embedded 24 pages/cpu @ffff88013e200000 s69504 r8192 d20608 u262144
>pcpu-alloc: s69504 r8192 d20608 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 999309
>Policy zone: Normal
>Kernel command line: BOOT_IMAGE=/3.1.4/bzImage root=/dev/sda3 rootfstype=ext4 drm.debug=0xe i915.lvds_use_ssc=0
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3882888k/5216256k available (4488k kernel code, 1137476k absent, 195892k reserved, 1837k data, 560k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:744 16
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2192.773 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.54 BogoMIPS (lpj=2192773)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys freezer
>Disabled fast string operations
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20110623
>DMAR: Host address width 36
>DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
>DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
>DMAR: RMRR base: 0x000000bacd5000 end: 0x000000bacebfff
>DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
>DMAR: No ATSR found
>Not enabling x2apic, Intr-remapping init failed.
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz stepping 07
>Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 98000
>Disabled fast string operations
> #2
>smpboot cpu 2: start_ip = 98000
>Disabled fast string operations
> #3
>smpboot cpu 3: start_ip = 98000
>Disabled fast string operations
> #4
>smpboot cpu 4: start_ip = 98000
>Disabled fast string operations
> #5
>smpboot cpu 5: start_ip = 98000
>Disabled fast string operations
> #6
>smpboot cpu 6: start_ip = 98000
>Disabled fast string operations
> #7 Ok.
>smpboot cpu 7: start_ip = 98000
>Disabled fast string operations
>Brought up 8 CPUs
>Total of 8 processors activated (35082.27 BogoMIPS).
>PM: Registering ACPI NVS region at 8f000 (4096 bytes)
>PM: Registering ACPI NVS region at bae9f000 (1048576 bytes)
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: EC description table is found, configuring boot EC
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 00000000bae90018 008C0 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 008C0 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
>ACPI: SSDT 00000000bae91a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
>ACPI: SSDT 00000000bae8fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>ACPI: Power Resource [PUBS] (on)
>ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>ACPI: ACPI Dock Station Driver: 2 docks/bays found
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfebfffff]
>pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
>pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
>pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
>pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
>pci 0000:00:16.0: reg 10: [mem 0xd2625000-0xd262500f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:16.3: [8086:1c3d] type 0 class 0x000700
>pci 0000:00:16.3: reg 10: [io  0x50b0-0x50b7]
>pci 0000:00:16.3: reg 14: [mem 0xd262c000-0xd262cfff]
>pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
>pci 0000:00:19.0: reg 10: [mem 0xd2600000-0xd261ffff]
>pci 0000:00:19.0: reg 14: [mem 0xd262b000-0xd262bfff]
>pci 0000:00:19.0: reg 18: [io  0x5080-0x509f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 10: [mem 0xd262a000-0xd262a3ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xd2620000-0xd2623fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xd2629000-0xd26293ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x50a8-0x50af]
>pci 0000:00:1f.2: reg 14: [io  0x50bc-0x50bf]
>pci 0000:00:1f.2: reg 18: [io  0x50a0-0x50a7]
>pci 0000:00:1f.2: reg 1c: [io  0x50b8-0x50bb]
>pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
>pci 0000:00:1f.2: reg 24: [mem 0xd2628000-0xd26287ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xd2624000-0xd26240ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:03:00.0: [8086:4238] type 0 class 0x000280
>pci 0000:03:00.0: reg 10: [mem 0xd2500000-0xd2501fff 64bit]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [mem 0xd2500000-0xd25fffff]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
>pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.3:   bridge window [mem 0xd1d00000-0xd24fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xd0400000-0xd0bfffff 64bit pref]
>pci 0000:0d:00.0: [1180:e822] type 0 class 0x000880
>pci 0000:0d:00.0: reg 10: [mem 0xd1401000-0xd14010ff]
>pci 0000:0d:00.0: supports D1 D2
>pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0d:00.0: PME# disabled
>pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
>pci 0000:0d:00.3: reg 10: [mem 0xd1400000-0xd14007ff]
>pci 0000:0d:00.3: supports D1 D2
>pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0d:00.3: PME# disabled
>pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
>pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.4:   bridge window [mem 0xd1400000-0xd1cfffff]
>pci 0000:00:1c.4:   bridge window [mem 0xd0c00000-0xd13fffff 64bit pref]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000008f000 - 000000000008ffff 
>reserve RAM buffer: 00000000ba99f000 - 00000000bbffffff 
>reserve RAM buffer: 00000000bb000000 - 00000000bbffffff 
>reserve RAM buffer: 000000013e600000 - 000000013fffffff 
>cfg80211: Calling CRDA to update world regulatory domain
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #7
>Switched to NOHz mode on CPU #5
>Switched to NOHz mode on CPU #4
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #2
>Switched to NOHz mode on CPU #6
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [mem 0x00000000-0x0009ffff]
>pnp 00:00: [mem 0x000c0000-0x000c3fff]
>pnp 00:00: [mem 0x000c4000-0x000c7fff]
>pnp 00:00: [mem 0x000c8000-0x000cbfff]
>pnp 00:00: [mem 0x000cc000-0x000cffff]
>pnp 00:00: [mem 0x000d0000-0x000d3fff]
>pnp 00:00: [mem 0x000d4000-0x000d7fff]
>pnp 00:00: [mem 0x000d8000-0x000dbfff]
>pnp 00:00: [mem 0x000dc000-0x000dffff]
>pnp 00:00: [mem 0x000e0000-0x000e3fff]
>pnp 00:00: [mem 0x000e4000-0x000e7fff]
>pnp 00:00: [mem 0x000e8000-0x000ebfff]
>pnp 00:00: [mem 0x000ec000-0x000effff]
>pnp 00:00: [mem 0x000f0000-0x000fffff]
>pnp 00:00: [mem 0x00100000-0xbf9fffff]
>pnp 00:00: [mem 0xfec00000-0xfed3ffff]
>pnp 00:00: [mem 0xfed4c000-0xffffffff]
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
>system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved
>system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved
>system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved
>system 00:00: [mem 0x000ec000-0x000effff] has been reserved
>system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
>system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:01: [bus 00-fe]
>pnp 00:01: [io  0x0cf8-0x0cff]
>pnp 00:01: [io  0x0000-0x0cf7 window]
>pnp 00:01: [io  0x0d00-0xffff window]
>pnp 00:01: [mem 0x000a0000-0x000bffff window]
>pnp 00:01: [mem 0x000c0000-0x000c3fff window]
>pnp 00:01: [mem 0x000c4000-0x000c7fff window]
>pnp 00:01: [mem 0x000c8000-0x000cbfff window]
>pnp 00:01: [mem 0x000cc000-0x000cffff window]
>pnp 00:01: [mem 0x000d0000-0x000d3fff window]
>pnp 00:01: [mem 0x000d4000-0x000d7fff window]
>pnp 00:01: [mem 0x000d8000-0x000dbfff window]
>pnp 00:01: [mem 0x000dc000-0x000dffff window]
>pnp 00:01: [mem 0x000e0000-0x000e3fff window]
>pnp 00:01: [mem 0x000e4000-0x000e7fff window]
>pnp 00:01: [mem 0x000e8000-0x000ebfff window]
>pnp 00:01: [mem 0x000ec000-0x000effff window]
>pnp 00:01: [mem 0xbfa00000-0xfebfffff window]
>pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:02: [io  0x0010-0x001f]
>pnp 00:02: [io  0x0090-0x009f]
>pnp 00:02: [io  0x0024-0x0025]
>pnp 00:02: [io  0x0028-0x0029]
>pnp 00:02: [io  0x002c-0x002d]
>pnp 00:02: [io  0x0030-0x0031]
>pnp 00:02: [io  0x0034-0x0035]
>pnp 00:02: [io  0x0038-0x0039]
>pnp 00:02: [io  0x003c-0x003d]
>pnp 00:02: [io  0x00a4-0x00a5]
>pnp 00:02: [io  0x00a8-0x00a9]
>pnp 00:02: [io  0x00ac-0x00ad]
>pnp 00:02: [io  0x00b0-0x00b5]
>pnp 00:02: [io  0x00b8-0x00b9]
>pnp 00:02: [io  0x00bc-0x00bd]
>pnp 00:02: [io  0x0050-0x0053]
>pnp 00:02: [io  0x0072-0x0077]
>pnp 00:02: [io  0x0400-0x047f]
>pnp 00:02: [io  0x0500-0x057f]
>pnp 00:02: [io  0x0800-0x080f]
>pnp 00:02: [io  0x15e0-0x15ef]
>pnp 00:02: [io  0x1600-0x167f]
>pnp 00:02: [mem 0xf8000000-0xfbffffff]
>pnp 00:02: [mem 0x00000000-0x00000fff]
>pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:02: [mem 0xfed10000-0xfed13fff]
>pnp 00:02: [mem 0xfed18000-0xfed18fff]
>pnp 00:02: [mem 0xfed19000-0xfed19fff]
>pnp 00:02: [mem 0xfed45000-0xfed4bfff]
>system 00:02: [io  0x0400-0x047f] has been reserved
>system 00:02: [io  0x0500-0x057f] has been reserved
>system 00:02: [io  0x0800-0x080f] has been reserved
>system 00:02: [io  0x15e0-0x15ef] has been reserved
>system 00:02: [io  0x1600-0x167f] has been reserved
>system 00:02: [mem 0xf8000000-0xfbffffff] could not be reserved
>system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
>system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x0000-0x000f]
>pnp 00:04: [io  0x0080-0x008f]
>pnp 00:04: [io  0x00c0-0x00df]
>pnp 00:04: [dma 4]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x00f0]
>pnp 00:06: [irq 13]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: [io  0x0070-0x0071]
>pnp 00:07: [irq 8]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:08: [io  0x0060]
>pnp 00:08: [io  0x0064]
>pnp 00:08: [irq 1]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:09: [irq 12]
>pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
>pnp 00:0a: [mem 0xfed40000-0xfed44fff]
>pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1:   bridge window [mem 0xd2500000-0xd25fffff]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
>pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.3:   bridge window [mem 0xd1d00000-0xd24fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xd0400000-0xd0bfffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
>pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.4:   bridge window [mem 0xd1400000-0xd1cfffff]
>pci 0000:00:1c.4:   bridge window [mem 0xd0c00000-0xd13fffff 64bit pref]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
>pci_bus 0000:03: resource 1 [mem 0xd2500000-0xd25fffff]
>pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:05: resource 1 [mem 0xd1d00000-0xd24fffff]
>pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd0bfffff 64bit pref]
>pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:0d: resource 1 [mem 0xd1400000-0xd1cfffff]
>pci_bus 0000:0d: resource 2 [mem 0xd0c00000-0xd13fffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800afda0000 - ffff8800b3da0000
>software IO TLB at phys 0xafda0000 - 0xb3da0000
>microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x15
>microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x15
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1322765678.606:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>msgmni has been set to 7692
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>intel_idle: MWAIT substates: 0x21120
>intel_idle: v0.4 model 0x2A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (47 C)
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>ACPI: Battery Slot [BAT0] (battery present)
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xbaef7018
>[drm:intel_opregion_setup], Public ACPI methods supported
>[drm:intel_opregion_setup], SWSCI supported
>[drm:intel_opregion_setup], ASLE supported
>i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_detect_pch], Found CougarPoint PCH
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x8 0xa
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:intel_panel_get_backlight], get backlight PWM = 4437
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4437
>[drm:intel_panel_get_backlight], get backlight PWM = 4437
>[drm:intel_crt_init], pch crt adpa set to 0x80f40000
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
>[drm:init_status_page], blt ring hws offset: 0x00042000
>[drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 17:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 16:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 34:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? yes
>[drm:drm_enable_connectors], connector 12 enabled? yes
>[drm:drm_target_preferred], looking for cmdline mode on connector 5
>[drm:drm_target_preferred], looking for preferred mode on connector 5
>[drm:drm_target_preferred], found mode 1920x1080
>[drm:drm_target_preferred], looking for cmdline mode on connector 12
>[drm:drm_target_preferred], looking for preferred mode on connector 12
>[drm:drm_target_preferred], found mode 1920x1200
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4
>[drm:intelfb_create], allocated 1920x1200 fb: 0x00063000, bo ffff880138231000
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>fbcon_init: detected unhandled fb_set_par error, error code -22
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 22, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 108, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:38:1920x1200]
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 22, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 108, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:12:VGA-1] set DPMS on
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>Console: switching to colour frame buffer device 240x67
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm:intel_opregion_gse_intr], non asle set request??
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4437
>[drm:intel_opregion_gse_intr], PWM freq is not supported
>[drm:intel_opregion_gse_intr], non asle set request??
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4437
>[drm:intel_opregion_gse_intr], PWM freq is not supported
>acpi device:01: registered as cooling_device8
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628100 irq 41
>ata2: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628180 irq 41
>ata3: DUMMY
>ata4: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628280 irq 41
>ata5: SATA max UDMA/133 abar m2048@0xd2628000 port 0xd2628300 irq 41
>ata6: DUMMY
>i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>cpuidle: using governor ladder
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>registered taskstats version 1
>alps.c: E6 report: 00 00 64
>alps.c: E7 report: 10 00 64
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST9500420AS      0003 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>Refined TSC clocksource calibration: 2192.878 MHz.
>Switching to clocksource tsc
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT20, max UDMA/66
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata2.00: configured for UDMA/66
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT33N     LT20 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
>Freeing unused kernel memory: 560k freed
>udev[1161]: starting version 164
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
>sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>sdhci-pci 0000:0d:00.0: setting latency timer to 64
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
>ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
>Registered led device: mmc0::
>ehci_hcd 0000:00:1a.0: support lpm
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: supports USB remote wakeup
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd262a000
>ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>Copyright(c) 2003-2011 Intel Corporation
>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:03:00.0: setting latency timer to 64
>iwlagn 0000:03:00.0: pci_resource_len = 0x00002000
>iwlagn 0000:03:00.0: pci_resource_base = ffffc900050a0000
>iwlagn 0000:03:00.0: HW Revision ID = 0x35
>iwlagn 0000:03:00.0: irq 42 for MSI/MSI-X
>iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
>iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.1.4-gentoo ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
>ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
>ehci_hcd 0000:00:1d.0: support lpm
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: supports USB remote wakeup
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd2629000
>ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
>iwlagn 0000:03:00.0: Device SKU: 0X1f0
>iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
>iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.1.4-gentoo ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
>e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci 0000:0d:00.3: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 1: status 0501 change 0001
>firewire_ohci 0000:0d:00.3: irq 44 for MSI/MSI-X
>firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
>hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1a.0: port 1 high speed
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:53:50:fa
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>ehci_hcd 0000:00:1a.0: port 1 high speed
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
>Registered led device: phy0-led
>ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
>ehci_hcd 0000:00:1a.0: LPM: no device attached
>usb 1-1: udev 2, busnum 1, minor = 1
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: usb_probe_device
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
>hub 1-1:1.0: usb_probe_interface
>hub 1-1:1.0: usb_probe_interface - got id
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>hub 1-1:1.0: standalone hub
>hub 1-1:1.0: individual port power switching
>hub 1-1:1.0: individual port over-current protection
>hub 1-1:1.0: Single TT
>hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-1:1.0: power on to power good time: 100ms
>hub 1-1:1.0: local power source is good
>hub 1-1:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '002'
>hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
>hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>hda_codec: CX20590: BIOS auto-probing.
>ehci_hcd 0000:00:1d.0: port 1 high speed
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>hub 1-1:1.0: port 3: status 0101 change 0001
>hub 1-1:1.0: port 4: status 0101 change 0001
>hub 1-1:1.0: port 5: status 0101 change 0001
>hub 1-1:1.0: port 6: status 0101 change 0001
>usb 2-1: new high speed USB device number 2 using ehci_hcd
>ehci_hcd 0000:00:1d.0: port 1 high speed
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-1: link qh256-0001/ffff88013817a100 start 1 [1/0 us]
>ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
>ehci_hcd 0000:00:1d.0: LPM: no device attached
>usb 2-1: udev 2, busnum 2, minor = 129
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: usb_probe_device
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: adding 2-1:1.0 (config #1, interface 0)
>hub 2-1:1.0: usb_probe_interface
>hub 2-1:1.0: usb_probe_interface - got id
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>hub 2-1:1.0: standalone hub
>hub 2-1:1.0: individual port power switching
>hub 2-1:1.0: individual port over-current protection
>hub 2-1:1.0: Single TT
>hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 2-1:1.0: power on to power good time: 100ms
>hub 2-1:1.0: local power source is good
>hub 2-1:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '002'
>hub 1-1:1.0: state 7 ports 6 chg 0078 evt 0000
>hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
>firewire_core: created device fw0: GUID f0def1ff5350faff, S400
>hub 1-1:1.0: port 3 not reset yet, waiting 10ms
>usb 1-1.3: new full speed USB device number 3 using ehci_hcd
>hub 1-1:1.0: port 3 not reset yet, waiting 10ms
>hub 2-1:1.0: port 4: status 0101 change 0001
>usb 1-1.3: ep0 maxpacket = 8
>usb 1-1.3: default language 0x0409
>usb 1-1.3: udev 3, busnum 1, minor = 2
>usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
>usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3: Product: Biometric Coprocessor
>usb 1-1.3: Manufacturer: UPEK
>usb 1-1.3: usb_probe_device
>usb 1-1.3: configuration #1 chosen from 1 choice
>usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
>drivers/usb/core/inode.c: creating file '003'
>hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
>hub 1-1:1.0: port 4 not reset yet, waiting 10ms
>usb 2-1: link qh256-0001/ffff88013817ab80 start 1 [1/0 us]
>usb 1-1.4: new full speed USB device number 4 using ehci_hcd
>hub 1-1:1.0: port 4 not reset yet, waiting 10ms
>usb 1-1.4: skipped 1 descriptor after interface
>usb 1-1.4: default language 0x0409
>usb 1-1.4: udev 4, busnum 1, minor = 3
>usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1.4: Product: Broadcom Bluetooth Device
>usb 1-1.4: Manufacturer: Broadcom Corp
>usb 1-1.4: SerialNumber: EC55F9FF3026
>usb 1-1.4: usb_probe_device
>usb 1-1.4: configuration #1 chosen from 1 choice
>usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
>usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
>usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
>usb 1-1.4: adding 1-1.4:1.3 (config #1, interface 3)
>drivers/usb/core/inode.c: creating file '004'
>hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
>hub 1-1:1.0: port 5 not reset yet, waiting 10ms
>usb 1-1.5: new high speed USB device number 5 using ehci_hcd
>hub 1-1:1.0: port 5 not reset yet, waiting 10ms
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>btusb 1-1.4:1.0: usb_probe_interface
>btusb 1-1.4:1.0: usb_probe_interface - got id
>usb 1-1.4: link qh1-0601/ffff88013817a880 start 0 [1/2 us]
>btusb 1-1.4:1.2: usb_probe_interface
>btusb 1-1.4:1.2: usb_probe_interface - got id
>btusb 1-1.4:1.3: usb_probe_interface
>btusb 1-1.4:1.3: usb_probe_interface - got id
>usbcore: registered new interface driver btusb
>usb 1-1.5: udev 5, busnum 1, minor = 4
>usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
>usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1.5: usb_probe_device
>usb 1-1.5: configuration #1 chosen from 1 choice
>usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
>hub 1-1.5:1.0: usb_probe_interface
>hub 1-1.5:1.0: usb_probe_interface - got id
>hub 1-1.5:1.0: USB hub found
>hub 1-1.5:1.0: 6 ports detected
>hub 1-1.5:1.0: standalone hub
>hub 1-1.5:1.0: individual port power switching
>hub 1-1.5:1.0: individual port over-current protection
>hub 1-1.5:1.0: TT per port
>hub 1-1.5:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-1.5:1.0: Port indicators are supported
>hub 1-1.5:1.0: power on to power good time: 100ms
>hub 1-1.5:1.0: local power source is good
>hub 1-1.5:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '005'
>hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
>hub 1-1:1.0: port 6 not reset yet, waiting 10ms
>usb 1-1.6: new high speed USB device number 6 using ehci_hcd
>hub 1-1:1.0: port 6 not reset yet, waiting 10ms
>hub 1-1.5:1.0: port 2: status 0301 change 0001
>hub 1-1.5:1.0: port 3: status 0301 change 0001
>usb 1-1.6: skipped 1 descriptor after configuration
>usb 1-1.6: skipped 5 descriptors after interface
>usb 1-1.6: skipped 1 descriptor after endpoint
>usb 1-1.6: skipped 20 descriptors after interface
>usb 1-1.6: default language 0x0409
>usb 1-1.6: udev 6, busnum 1, minor = 5
>usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
>usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.6: Product: Integrated Camera
>usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
>usb 1-1.6: usb_probe_device
>usb 1-1.6: configuration #1 chosen from 1 choice
>usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
>usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
>drivers/usb/core/inode.c: creating file '006'
>hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0020
>hub 2-1:1.0: state 7 ports 8 chg 0010 evt 0000
>hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
>hub 2-1:1.0: port 4 not reset yet, waiting 10ms
>usb 1-1.5: link qh256-0001/ffff880135ad4180 start 3 [1/0 us]
>usb 2-1.4: new high speed USB device number 3 using ehci_hcd
>hub 2-1:1.0: port 4 not reset yet, waiting 10ms
>usb 2-1.4: skipped 3 descriptors after interface
>usb 2-1.4: skipped 4 descriptors after interface
>usb 2-1.4: skipped 4 descriptors after interface
>usb 2-1.4: skipped 2 descriptors after interface
>usb 2-1.4: skipped 5 descriptors after interface
>usb 2-1.4: skipped 2 descriptors after interface
>usb 2-1.4: skipped 4 descriptors after interface
>usb 2-1.4: skipped 3 descriptors after interface
>usb 2-1.4: skipped 4 descriptors after interface
>usb 2-1.4: skipped 4 descriptors after interface
>usb 2-1.4: skipped 2 descriptors after interface
>usb 2-1.4: skipped 5 descriptors after interface
>usb 2-1.4: skipped 2 descriptors after interface
>usb 2-1.4: default language 0x0409
>usb 2-1.4: udev 3, busnum 2, minor = 130
>usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
>usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.4: Product: F5521gw
>usb 2-1.4: Manufacturer: Lenovo
>usb 2-1.4: SerialNumber: 2CBEDDE1249B3640
>usb 2-1.4: usb_probe_device
>usb 2-1.4: configuration #1 chosen from 3 choices
>usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
>usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1)
>usb 2-1.4: adding 2-1.4:1.2 (config #1, interface 2)
>usb 2-1.4: adding 2-1.4:1.3 (config #1, interface 3)
>usb 2-1.4: adding 2-1.4:1.4 (config #1, interface 4)
>usb 2-1.4: adding 2-1.4:1.5 (config #1, interface 5)
>usb 2-1.4: adding 2-1.4:1.6 (config #1, interface 6)
>usb 2-1.4: adding 2-1.4:1.7 (config #1, interface 7)
>usb 2-1.4: adding 2-1.4:1.8 (config #1, interface 8)
>usb 2-1.4: adding 2-1.4:1.9 (config #1, interface 9)
>usb 2-1.4: adding 2-1.4:1.10 (config #1, interface 10)
>drivers/usb/core/inode.c: creating file '003'
>hub 1-1.5:1.0: state 7 ports 6 chg 000c evt 0000
>hub 1-1.5:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
>hub 1-1.5:1.0: port 2 not reset yet, waiting 10ms
>usb 1-1.5.2: new low speed USB device number 7 using ehci_hcd
>hub 1-1.5:1.0: port 2 not reset yet, waiting 10ms
>usb 1-1.5.2: skipped 1 descriptor after interface
>usb 1-1.5.2: default language 0x0409
>usb 1-1.5.2: udev 7, busnum 1, minor = 6
>usb 1-1.5.2: New USB device found, idVendor=046d, idProduct=c501
>usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.5.2: Product: USB Receiver
>usb 1-1.5.2: Manufacturer: Logitech
>usb 1-1.5.2: usb_probe_device
>usb 1-1.5.2: configuration #1 chosen from 1 choice
>usb 1-1.5.2: adding 1-1.5.2:1.0 (config #1, interface 0)
>drivers/usb/core/inode.c: creating file '007'
>hub 1-1.5:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
>hub 1-1.5:1.0: port 3 not reset yet, waiting 10ms
>usb 1-1.5.3: new low speed USB device number 8 using ehci_hcd
>hub 1-1.5:1.0: port 3 not reset yet, waiting 10ms
>usbhid 1-1.5.2:1.0: usb_probe_interface
>usbhid 1-1.5.2:1.0: usb_probe_interface - got id
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input6
>generic-usb 0003:046D:C501.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5.2/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>usb 1-1.5.3: skipped 1 descriptor after interface
>usb 1-1.5.3: skipped 1 descriptor after interface
>usb 1-1.5.3: default language 0x0409
>usb 1-1.5.3: udev 8, busnum 1, minor = 7
>usb 1-1.5.3: New USB device found, idVendor=046d, idProduct=c308
>usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.5.3: Product: Logitech USB Keyboard
>usb 1-1.5.3: Manufacturer: Logitech
>usb 1-1.5.3: usb_probe_device
>usb 1-1.5.3: configuration #1 chosen from 1 choice
>usb 1-1.5.3: adding 1-1.5.3:1.0 (config #1, interface 0)
>usbhid 1-1.5.3:1.0: usb_probe_interface
>usbhid 1-1.5.3:1.0: usb_probe_interface - got id
>input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input7
>usb 1-1.5.3: link qh8-0601/ffff880135810280 start 4 [1/2 us]
>generic-usb 0003:046D:C308.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.5.3/input0
>usb 1-1.5.3: adding 1-1.5.3:1.1 (config #1, interface 1)
>usbhid 1-1.5.3:1.1: usb_probe_interface
>usbhid 1-1.5.3:1.1: usb_probe_interface - got id
>input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.1/input/input8
>usb 1-1.5.3: link qh32-0601/ffff880135810000 start 5 [1/2 us]
>generic-usb 0003:046D:C308.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.5.3/input1
>drivers/usb/core/inode.c: creating file '008'
>hub 1-1.5:1.0: state 7 ports 6 chg 0000 evt 0008
>usb 1-1.5.2: link qh8-0601/ffff880135810600 start 6 [1/2 us]
>usb 1-1.5.2: unlink qh8-0601/ffff880135810600 start 6 [1/2 us]
>usb 1-1.4: unlink qh1-0601/ffff88013817a880 start 0 [1/2 us]
>usb 1-1: clear tt buffer port 4, a4 ep2 t04048d80
>EXT4-fs (sda3): re-mounted. Opts: (null)
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1
>Adding 7999484k swap on /dev/sda2.  Priority:-1 extents:1 across:7999484k 
>e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S
>iwlagn 0000:03:00.0: Radio type=0x0-0x3-0x1
>iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S
>iwlagn 0000:03:00.0: Radio type=0x0-0x3-0x1
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 17:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 16:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 34:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 15:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 17:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 16:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 19:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 20:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 18:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 21:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 34:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_mode_addfb], [FB:40]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1400x1050" 0 122000 1400 1488 1640 1880 1050 1052 1064 1082 0x0 0x5
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1400x1050" 0 122000 1400 1488 1640 1880 1050 1052 1064 1082 0x0 0x5
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>detected fb_set_par error, error code: -22
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set] *ERROR* Couldn't find PLL settings for mode!
>[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:39] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:4]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa3f40008, result 1
>[drm:intel_crt_detect], CRT detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1

Actions: View

Attachments on bug 43379: 53971 | 53973 | 53984 | 53985 | 54033 | 54034 | 54035 | 60942 | 60943

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.