Attachment 55792 Details for Bug 44876 – HDMI cable run, waited for idle blank -> dmesg

HDMI cable run, waited for idle blank -> dmesg

dmesg-hdmi-idleblank.txt (text/plain), 75.49 KB, created by daniel on 2012-01-19 08:38:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: daniel

Created: 2012-01-19 08:38:25 UTC

Size: 75.49 KB

patch

obsolete

>Initializing cgroup subsys cpu
>Linux version 3.1.9-grsec (root@laptop-ds-lx) (gcc version 4.5.3 (Gentoo Hardened 4.5.3-r1 p1.0, pie-0.4.5) ) #9 SMP Wed Jan 18 13:39:17 CET 2012
>Command line: panic=5 drm.debug=0xe
>KERNEL supported cpus:
>  Intel GenuineIntel
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
> BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
> BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
> BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
> BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
> BIOS-e820: 0000000040200000 - 00000000caa25000 (usable)
> BIOS-e820: 00000000caa25000 - 00000000caa69000 (reserved)
> BIOS-e820: 00000000caa69000 - 00000000cadb7000 (usable)
> BIOS-e820: 00000000cadb7000 - 00000000cade7000 (reserved)
> BIOS-e820: 00000000cade7000 - 00000000cafe7000 (ACPI NVS)
> BIOS-e820: 00000000cafe7000 - 00000000cafff000 (ACPI data)
> BIOS-e820: 00000000cafff000 - 00000000cb000000 (usable)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
> BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.6 present.
>DMI: Dell Inc. Latitude E6420/0K0DNP, BIOS A08 10/18/2011
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x12e000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FF8000000 write-back
>  3 base 0C8000000 mask FFC000000 write-back
>  4 base 0CB000000 mask FFF000000 uncachable
>  5 base 100000000 mask FE0000000 write-back
>  6 base 120000000 mask FF0000000 write-back
>  7 base 12E000000 mask FFE000000 uncachable
>  8 disabled
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000cb000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcb000 max_arch_pfn = 0x400000000
>found SMP MP-table at [ffff8800000f1a90] f1a90
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff880000098000] 98000 size 8192
>init_memory_mapping: 0000000000000000-00000000cb000000
> 0000000000 - 00cb000000 page 2M
>kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
>init_memory_mapping: 0000000100000000-000000012e000000
> 0100000000 - 012e000000 page 2M
>kernel direct mapping tables up to 12e000000 @ cadb1000-cadb7000
>ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
>ACPI: XSDT 00000000caffde18 00074 (v01 DELL    CBX3    06222004 MSFT 00010013)
>ACPI: FACP 00000000caf87d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
>ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
>ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20110623/tbfadt-489)
>ACPI: DSDT 00000000caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
>ACPI: FACS 00000000cafe4e40 00040
>ACPI: APIC 00000000caffcf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
>ACPI: TCPA 00000000cafe5d18 00032 (v02                 00000000      00000000)
>ACPI: SSDT 00000000caf88a98 002F9 (v01 DELLTP      TPM 00003000 INTL 20090903)
>ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
>ACPI: HPET 00000000cafe5c18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
>ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
>ACPI: SSDT 00000000caf6c818 007C2 (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
>ACPI: SSDT 00000000caf6b018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
>ACPI: SLIC 00000000caf75c18 00176 (v03 DELL    CBX3    06222004 MSFT 00010013)
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880129600000-ffff88012d5fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0012e000
>Movable zone start PFN for each node
>early_node_map[7] active PFN ranges
>    0: 0x00000010 -> 0x0000009a
>    0: 0x00000100 -> 0x00020000
>    0: 0x00020200 -> 0x00040000
>    0: 0x00040200 -> 0x000caa25
>    0: 0x000caa69 -> 0x000cadb7
>    0: 0x000cafff -> 0x000cb000
>    0: 0x00100000 -> 0x0012e000
>On node 0 totalpages: 1018110
>  DMA zone: 64 pages used for memmap
>  DMA zone: 2 pages reserved
>  DMA zone: 3912 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 809396 pages, LIFO batch:31
>  Normal zone: 2944 pages used for memmap
>  Normal zone: 185472 pages, LIFO batch:31
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>Allocating PCI resources starting at cb000000 (gap: cb000000:33d1c000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 21 pages/cpu @ffff88012dc00000 s56640 r8192 d21184 u524288
>pcpu-alloc: s56640 r8192 d21184 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 998780
>Kernel command line: panic=5 drm.debug=0xe
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3920476k/4947968k available (5551k kernel code, 875528k absent, 151964k reserved, 4198k data, 3068k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:2304
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2294.850 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.70 BogoMIPS (lpj=22948500)
>pid_max: default: 32768 minimum: 501
>Security Framework initialized
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>mce: CPU supports 7 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>Freeing SMP alternatives: 36k freed
>ACPI: Core revision 20110623
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
>Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 98000
> #2
>smpboot cpu 2: start_ip = 98000
> #3 Ok.
>smpboot cpu 3: start_ip = 98000
>Brought up 4 CPUs
>Total of 4 processors activated (18358.21 BogoMIPS).
>devtmpfs: initialized
>Dell Latitude E6420 series board detected. Selecting PCI-method for reboots.
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>dmi type 0xB1 record - unknown flag
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 00000000cadd7798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT            (nil) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
>ACPI: SSDT 00000000cadd8a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT            (nil) 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
>ACPI: SSDT 00000000cadd6d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT            (nil) 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 8 1f 
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff]
>pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
>pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
>pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
>pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
>pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
>pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff]
>pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff]
>pci 0000:00:19.0: reg 18: [io  0x4080-0x409f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x40d0-0x40d7]
>pci 0000:00:1f.2: reg 14: [io  0x40c0-0x40c3]
>pci 0000:00:1f.2: reg 18: [io  0x40b0-0x40b7]
>pci 0000:00:1f.2: reg 1c: [io  0x40a0-0x40a3]
>pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
>pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x4040-0x405f]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:02:00.0: [8086:0082] type 0 class 0x000280
>pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [mem 0xe2d00000-0xe2dfffff]
>pci 0000:00:1c.2: PCI bridge to [bus 03-08]
>pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 09-09]
>pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>pci 0000:0a:00.0: [1217:8221] type 0 class 0x000805
>pci 0000:0a:00.0: reg 10: [mem 0xe2c20000-0xe2c201ff]
>pci 0000:0a:00.0: supports D1 D2
>pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0a:00.0: PME# disabled
>pci 0000:0a:00.1: [1217:8231] type 0 class 0x000180
>pci 0000:0a:00.1: reg 10: [mem 0xe2c10000-0xe2c10fff]
>pci 0000:0a:00.1: reg 18: [mem 0xe2c00000-0xe2c007ff]
>pci 0000:0a:00.1: supports D1 D2
>pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0a:00.1: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
>pci 0000:00:1c.5:   bridge window [mem 0xe2c00000-0xe2cfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 1e 1f 
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.24.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009a800 - 000000000009ffff 
>reserve RAM buffer: 00000000caa25000 - 00000000cbffffff 
>reserve RAM buffer: 00000000cadb7000 - 00000000cbffffff 
>reserve RAM buffer: 00000000cb000000 - 00000000cbffffff 
>reserve RAM buffer: 000000012e000000 - 000000012fffffff 
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>cfg80211: Calling CRDA to update world regulatory domain
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-3e]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0081-0x0091]
>pnp 00:01: [io  0x0093-0x009f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [mem 0xff000000-0xffffffff]
>pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x1000-0x100f]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x047f]
>pnp 00:05: [io  0x0500-0x057f]
>pnp 00:05: [io  0x164e-0x164f]
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x1000-0x100f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x047f] has been reserved
>system 00:05: [io  0x0500-0x057f] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0060]
>pnp 00:07: [io  0x0064]
>pnp 00:07: [irq 1]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #2
>Switched to NOHz mode on CPU #1
>pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
>pnp 00:09: [irq 12]
>pnp 00:09: Plug and Play ACPI device, IDs DLL0493 PNP0f13 (active)
>pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:0a: [mem 0xfed10000-0xfed17fff]
>pnp 00:0a: [mem 0xfed18000-0xfed18fff]
>pnp 00:0a: [mem 0xfed19000-0xfed19fff]
>pnp 00:0a: [mem 0xf8000000-0xfbffffff]
>pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0a: [mem 0xfed90000-0xfed93fff]
>pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
>pnp 00:0a: [mem 0xff000000-0xffffffff]
>pnp 00:0a: [mem 0xfee00000-0xfeefffff]
>pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
>system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
>system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [irq 23]
>pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
>pnp 00:0c: [mem 0x20000000-0x201fffff]
>pnp 00:0c: [mem 0x40000000-0x401fffff]
>system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
>system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [mem 0xe2d00000-0xe2dfffff]
>pci 0000:00:1c.2: PCI bridge to [bus 03-08]
>pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
>pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 09-09]
>pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
>pci 0000:00:1c.5:   bridge window [mem 0xe2c00000-0xe2cfffff]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
>pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
>pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
>pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
>pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
>pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800c6a25000 - ffff8800caa25000
>software IO TLB at phys 0xc6a25000 - 0xcaa25000
>Simple Boot Flag at 0xf3 set to 0x1
>microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
>microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
>microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
>microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1326993805.810:1): initialized
>NTFS driver 2.1.30 [Flags: R/O].
>fuse init (API version 7.17)
>msgmni has been set to 7657
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
>cpcihp_generic: not configured, disabling.
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>intel_idle: MWAIT substates: 0x21120
>intel_idle: v0.4 model 0x2A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SBTN]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (25 C)
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>i8k: unable to get SMM BIOS version
>Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>ACPI: Battery Slot [BAT0] (battery present)
>[drm:intel_opregion_setup], graphic opregion physical addr: 0xcaf68018
>[drm:intel_opregion_setup], Public ACPI methods supported
>[drm:intel_opregion_setup], SWSCI supported
>[drm:intel_opregion_setup], ASLE supported
>i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm:intel_detect_pch], Found CougarPoint PCH
>[drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 114060 1600 1648 1680 2044 900 902 907 930 0x8 0xa
>[drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_dsm_pci_probe], no _DSM method for intel device
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_panel_get_backlight], get backlight PWM = 1072
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_get_backlight], get backlight PWM = 1072
>[drm:intel_crt_init], pch crt adpa set to 0xf40000
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOB
>[drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>Refined TSC clocksource calibration: 2294.786 MHz.
>Switching to clocksource tsc
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp], crtc 1 is disabled
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], no output, disabling
>ACPI: Battery Slot [BAT1] (battery absent)
>[drm:init_status_page], render ring hws offset: 0x00000000
>[drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
>[drm:init_status_page], blt ring hws offset: 0x00042000
>[drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1920x1080" 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 15
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>ACPI: Battery Slot [BAT2] (battery absent)
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? yes
>[drm:drm_enable_connectors], connector 12 enabled? no
>[drm:drm_enable_connectors], connector 15 enabled? yes
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 21 enabled? no
>[drm:drm_enable_connectors], connector 23 enabled? no
>[drm:drm_enable_connectors], connector 24 enabled? no
>[drm:drm_enable_connectors], connector 26 enabled? no
>[drm:drm_target_preferred], looking for cmdline mode on connector 5
>[drm:drm_target_preferred], looking for preferred mode on connector 5
>[drm:drm_target_preferred], found mode 1600x900
>[drm:drm_target_preferred], looking for cmdline mode on connector 15
>[drm:drm_target_preferred], looking for preferred mode on connector 15
>[drm:drm_target_preferred], found mode 1920x1200
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4
>[drm:intelfb_create], allocated 1920x1200 fb: 0x00063000, bo ffff880127d93600
>fbcon: inteldrmfb (fb0) is primary device
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
>[drm:ironlake_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 81, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:34:1600x900]
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 81, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], fbc set to per-chip default
>[drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 1072
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:40:1920x1200]
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:HDMI-A-1] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>Console: switching to colour frame buffer device 200x56
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 1072
>acpi device:38: registered as cooling_device4
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>brd: module loaded
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:23:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:24:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:26:DP-3] status updated from 2 to 2
>ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 41
>ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 41
>ata3: DUMMY
>ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 41
>ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 41
>ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 41
>e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
>e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:82:cc:a8
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 3041FF-0FF
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>usbcore: registered new interface driver asix
>cdc_ncm: 04-Aug-2011
>usbcore: registered new interface driver cdc_ncm
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.1.9-grsec ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.1.9-grsec ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver cdc_acm
>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usb 2-1: new high speed USB device number 2 using ehci_hcd
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.4: new full speed USB device number 3 using ehci_hcd
>ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>ata1.00: ATA-8: Hitachi HTS725025A9A364, PC2OC70E, max UDMA/133
>ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72502 PC2O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8A2, 1.02, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8A2    1.02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>usb 1-1.4: device descriptor read/64, error -110
>usb 1-1.4: device descriptor read/64, error -110
>usb 1-1.4: new full speed USB device number 4 using ehci_hcd
>usb 1-1.4: device descriptor read/64, error -110
>usb 1-1.4: device descriptor read/64, error -110
>usb 1-1.4: new full speed USB device number 5 using ehci_hcd
>usb 1-1.4: device descriptor read/8, error -110
>usb 1-1.4: device descriptor read/8, error -110
>usb 1-1.4: new full speed USB device number 6 using ehci_hcd
>usb 1-1.4: device descriptor read/8, error -110
>usb 1-1.4: device descriptor read/8, error -110
>hub 1-1:1.0: unable to enumerate USB device on port 4
>usb 2-1.8: new full speed USB device number 3 using ehci_hcd
>usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
>usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.8: Product: 5880
>usb 2-1.8: Manufacturer: Broadcom Corp
>usb 2-1.8: SerialNumber: 0123456789ABCD
>usb 2-1.8: config 0 descriptor??
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>USB Serial support registered for GSM modem (1-port)
>usbcore: registered new interface driver option
>option: v0.7.2:USB Driver for GSM modems
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042: Warning: Keylock active
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>i2c /dev entries driver
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
>sdhci-pci 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:0a:00.0: Invalid iomem size. You may experience problems.
>sdhci-pci 0000:0a:00.0: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
>HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=0
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
>HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=0
>ALSA device list:
>  #0: HDA Intel PCH at 0xe2e60000 irq 43
>HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=0
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Bridge firewalling registered
>Ebtables v2.0 registered
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>registered taskstats version 1
>Freeing unused kernel memory: 3068k freed
>EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>udevd[1253]: starting version 171
>Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>Copyright(c) 2003-2011 Intel Corporation
>iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:02:00.0: setting latency timer to 64
>iwlagn 0000:02:00.0: pci_resource_len = 0x00002000
>iwlagn 0000:02:00.0: pci_resource_base = ffffc90011388000
>iwlagn 0000:02:00.0: HW Revision ID = 0x34
>iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
>iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
>iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
>iwlagn 0000:02:00.0: device EEPROM VER=0x715, CALIB=0x6
>iwlagn 0000:02:00.0: Device SKU: 0X1f0
>iwlagn 0000:02:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
>iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>iwlagn 0000:02:00.0: loaded firmware version 17.168.5.3 build 42301
>Registered led device: phy0-led
>ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>EXT4-fs (dm-5): re-mounted. Opts: (null)
>EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>Adding 2097148k swap on /dev/mapper/crypt-swap.  Priority:-1 extents:1 across:2097148k 
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:41] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1920x1080" 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 15
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9
>[drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:drm_mode_debug_printmodeline], Modeline 47:"1920x1080" 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_prune_invalid], Not using 1920x1080 mode 15
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 9:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 35:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
>[drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:24:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected
>[drm:drm_mode_addfb], [FB:42]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:42] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 34:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
>[drm:ironlake_crtc_mode_set], Mode for pipe A:
>[drm:drm_mode_debug_printmodeline], Modeline 43:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:43:1024x768]
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 1072
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
>[drm:drm_mode_setcrtc], [CRTC:4]
>[drm:drm_mode_setcrtc], [CONNECTOR:15:HDMI-A-1]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:42] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-1] to [CRTC:4]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:drm_crtc_helper_set_mode], [CRTC:4]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe B:
>[drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 0092D000 00000000 0 0 4096
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:44:1024x768]
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:HDMI-A-1] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>eth0: no IPv6 routers present
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 1072
>[drm:intel_crtc_cursor_set], 
>[drm:intel_crtc_cursor_set], 
>[drm:pch_irq_handler], PCH transcoder audio interrupt
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:23:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:24:DP-2] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:26:DP-3] status updated from 2 to 2
>iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
>iwlagn 0000:02:00.0: Radio type=0x1-0x2-0x0
>iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S
>iwlagn 0000:02:00.0: Radio type=0x1-0x2-0x0
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6
>[drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 5, cursor: 6
>[drm:intel_update_fbc], 
>[drm:intel_update_fbc], more than one pipe active, disabling compression
>[drm:intel_panel_get_max_backlight], max backlight PWM = 4882

Actions: View

Attachments on bug 44876: 55706 | 55730 | 55731 | 55732 | 55733 | 55755 | 55756 | 55790 | 55791 | 55792 | 55793

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.