Attachment 56793 Details for Bug 45729 – The dmesg when the display turn to black on Sandybridge desktop

The dmesg when the display turn to black on Sandybridge desktop

dmesg.sgb3 (text/plain), 59.72 KB, created by Yi Sun on 2012-02-08 23:06:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yi Sun

Created: 2012-02-08 23:06:42 UTC

Size: 59.72 KB

patch

obsolete

>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getconnector], [CONNECTOR:7:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:7:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-2]
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U2410
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 53:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 39:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 44:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-3] disconnected
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated from 2 to 2
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
>[drm:drm_mode_getconnector], [CONNECTOR:7:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:7:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-3] disconnected
>[drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-2]
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_edid_to_eld], ELD monitor DELL U2410
>[drm:drm_edid_to_eld], ELD size 9, SAD count 1
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-2] probed modes :
>[drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 41:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 36:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 31:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 42:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 53:"1440x576" 50 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 55:"1440x480" 60 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x1a
>[drm:drm_mode_debug_printmodeline], Modeline 39:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 54:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 44:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[drm:drm_mode_addfb], [FB:27]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:ironlake_update_plane], Writing base 0092E000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:drm_mode_addfb], [FB:43]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:43] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 011F8000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:45:1920x1080]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:46]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 019E1000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:49:1920x1080]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:56]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 49:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 021CA000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:57:1920x1080]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:58]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:58] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 57:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 029B3000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:59:1920x1080]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:drm_mode_addfb], [FB:60]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:60] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 1 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 0319C000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:61:1920x1080]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 12, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 54, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:62]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:62] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 61:"1920x1080" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[drm:drm_mode_debug_printmodeline], Modeline 63:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 63:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 10, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 18, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 23, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 102, fbc lines 4, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 63:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 03985000 00000000 0 0 6400
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 10, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 18, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 23, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 102, fbc lines 4, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:63:1600x1200]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 10, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 18, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 23, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 102, fbc lines 4, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:drm_mode_addfb], [FB:64]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:64] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 63:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 15, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 19, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 82, fbc lines 4, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 040D8000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 15, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 19, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 82, fbc lines 4, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:65:1280x1024]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 15, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 19, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 82, fbc lines 4, cursor 6
>[drm:pch_irq_handler], PCH HDCP audio interrupt
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:i915_hotplug_work_func], running encoder hotplug functions
>[drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[drm:intel_crt_detect], CRT not detected via hotplug
>[drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated from 2 to 2
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
>[drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status updated from 2 to 2
>[drm:intel_dp_detect], DPCD: 110a840101000000
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[drm:drm_detect_monitor_audio], Monitor has basic audio support
>[drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated from 1 to 1
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
>[drm:intel_dp_detect], DPCD: 0000000000000000
>[drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated from 2 to 2
>[drm:drm_mode_addfb], [FB:66]
>[drm:drm_mode_setcrtc], [CRTC:3]
>[drm:drm_mode_setcrtc], [CONNECTOR:19:DP-2]
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:66] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 65:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
>[drm:intel_update_fbc], 
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 045D8000 00000000 0 0 5120
>[drm:intel_update_fbc], 
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:67:1280x1024]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[drm:intel_dp_link_down], 
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:i915_get_vblank_timestamp], crtc 0 is disabled
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_update_fbc], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:drm_crtc_helper_set_config], modes are different, full mode set
>[drm:drm_mode_debug_printmodeline], Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_crtc_helper_set_config], encoder changed, full mode switch
>[drm:drm_crtc_helper_set_config], crtc changed, full mode switch
>[drm:drm_crtc_helper_set_config], [CONNECTOR:19:DP-2] to [CRTC:3]
>[drm:drm_crtc_helper_set_config], attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_dp_mode_fixup], Display port link bw 0a lane count 2 clock 270000
>[drm:drm_crtc_helper_set_mode], [CRTC:3]
>[drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 10
>[drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8)
>[drm:ironlake_crtc_mode_set], Mode for pipe 0:
>[drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:ironlake_update_plane], Writing base 00064000 00000000 0 0 7680
>[drm:intel_update_fbc], 
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 22, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 108, fbc lines 3, cursor 6
>[drm:drm_crtc_helper_set_mode], [ENCODER:20:TMDS-20] set [MODE:25:1920x1200]
>[drm:intel_dp_mode_set], Enabling DP audio on pipe A
>[drm:intel_write_eld], ELD on [CONNECTOR:19:DP-2], [ENCODER:20:TMDS-20]
>[drm:ironlake_write_eld], ELD on pipe A
>[drm:ironlake_write_eld], Audio directed to unknown port
>[drm:ironlake_write_eld], ELD: DisplayPort detected
>[drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
>[drm:ironlake_check_srwm], watermark 1: display plane 17, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 2: display plane 22, fbc lines 3, cursor 6
>[drm:ironlake_check_srwm], watermark 3: display plane 108, fbc lines 3, cursor 6
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:intel_wait_for_vblank], vblank wait timed out
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
>[drm:gen6_fdi_link_train], FDI train 1 done.
>[drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
>[drm:gen6_fdi_link_train], FDI train 2 done.
>[drm:gen6_fdi_link_train], FDI train done.
>[drm:intel_update_fbc], 
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>[drm:intel_dp_start_link_train], training pattern 1 signal levels 02800000
>[drm:intel_dp_start_link_train], clock recovery OK
>HDMI: detected monitor DELL U2410 at connection type DisplayPort
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>[drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
>[drm:drm_crtc_helper_set_config], 	[CONNECTOR:19:DP-2] set DPMS on
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
>[drm:intel_prepare_page_flip], preparing flip with no unpin work?

Actions: View

Attachments on bug 45729: 56793 | 57007 | 59873 | 59926 | 60048 | 61262 | 61924 | 62310 | 66201 | 66902 | 74877

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.