Attachment 60456 Details for Bug 49057 – dmesg output

dmesg output

dmesg.txt (text/plain), 66.19 KB, created by Justus Ranvier on 2012-04-22 10:17:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Justus Ranvier

Created: 2012-04-22 10:17:39 UTC

Size: 66.19 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.4.0-rc4+ (root@beryllium) (gcc version 4.5.3 (Gentoo Hardened 4.5.3-r2 p1.2, pie-0.4.7) ) #9 SMP PREEMPT Sun Apr 22 10:37:01 CDT 2012
>Command line: root=/dev/beryllium/root video=nouveufb:2560x1440-32 quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf780000 (usable)
> BIOS-e820: 00000000cf780000 - 00000000cf7a3000 (ACPI NVS)
> BIOS-e820: 00000000cf7a3000 - 00000000cf7e0000 (ACPI data)
> BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000042f800000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Gigabyte Technology Co., Ltd. Z68X-UD3H-B3/Z68X-UD3H-B3, BIOS F10 10/12/2011
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x42f800 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CCFFF write-protect
>  CD000-CDFFF uncachable
>  CE000-D0FFF write-protect
>  D1000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 0E0000000 mask FE0000000 uncachable
>  2 base 0D0000000 mask FF0000000 uncachable
>  3 base 100000000 mask F00000000 write-back
>  4 base 200000000 mask E00000000 write-back
>  5 base 300000000 mask F00000000 write-back
>  6 base 400000000 mask FC0000000 write-back
>  7 base 430000000 mask FF0000000 uncachable
>  8 disabled
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcf780 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff88000009b000] 9b000 size 8192
>init_memory_mapping: 0000000000000000-00000000cf780000
> 0000000000 - 00cf600000 page 2M
> 00cf600000 - 00cf780000 page 4k
>kernel direct mapping tables up to cf780000 @ 1fffa000-20000000
>init_memory_mapping: 0000000100000000-000000042f800000
> 0100000000 - 042f800000 page 2M
>kernel direct mapping tables up to 42f800000 @ cf76e000-cf780000
>RAMDISK: 379c5000 - 37ff0000
>ACPI: RSDP 00000000000f7920 00014 (v00 GBT   )
>ACPI: RSDT 00000000cf7a3040 00054 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000cf7a3100 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000cf7a31c0 04D4C (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
>ACPI: FACS 00000000cf780000 00040
>ACPI: MSDM 00000000cf7a8080 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: HPET 00000000cf7a8140 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000cf7a81c0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: ASPT 00000000cf7a8300 00034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
>ACPI: SSPT 00000000cf7a8340 02380 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
>ACPI: EUDS 00000000cf7aa6c0 000C0 (v01 GBT             00000000      00000000)
>ACPI: MATS 00000000cf7aa780 00034 (v01 GBT             00000000      00000000)
>ACPI: TAMG 00000000cf7aa7e0 00CFA (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>ACPI: APIC 00000000cf7a7f80 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: SSDT 00000000cf7ab500 03E74 (v01  INTEL PPM RCM  80000001 INTL 20061109)
>ACPI: MATS 00000000cf7af380 0AAE6 (v01        MATS RCM 80000001 INTL 20061109)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000042f800000
>Initmem setup node 0 0000000000000000-000000042f800000
>  NODE_DATA [000000042f7fc000 - 000000042f7fffff]
> [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041ee00000-ffff88042edfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0042f800
>Movable zone start PFN for each node
>Early memory PFN ranges
>    0: 0x00000010 -> 0x0000009d
>    0: 0x00000100 -> 0x000cf780
>    0: 0x00100000 -> 0x0042f800
>On node 0 totalpages: 4189965
>  DMA zone: 64 pages used for memmap
>  DMA zone: 2 pages reserved
>  DMA zone: 3915 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 829376 pages, LIFO batch:31
>  Normal zone: 52192 pages used for memmap
>  Normal zone: 3288096 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 8 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>Allocating PCI resources starting at cf800000 (gap: cf800000:20800000)
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>PERCPU: Embedded 25 pages/cpu @ffff88042f400000 s72000 r8192 d22208 u262144
>pcpu-alloc: s72000 r8192 d22208 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4121387
>Policy zone: Normal
>Kernel command line: root=/dev/beryllium/root video=nouveufb:2560x1440-32 quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>Memory: 16413720k/17555456k available (4296k kernel code, 795596k absent, 346140k reserved, 4234k data, 524k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>Preemptible hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:744 16
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3410.141 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.28 BogoMIPS (lpj=3410141)
>pid_max: default: 32768 minimum: 301
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20120320
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
>Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
>Brought up 8 CPUs
>Total of 8 processors activated (54562.25 BogoMIPS).
>devtmpfs: initialized
>NET: Registered protocol family 16
>kworker/u:0 used greatest stack depth: 6456 bytes left
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>kworker/u:0 used greatest stack depth: 6240 bytes left
>kworker/u:0 used greatest stack depth: 5440 bytes left
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI Warning: Incorrect checksum in table [TAMG] - 0x42, should be 0x41 (20120320/tbutils-323)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
>pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
>pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
>pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
>pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>pci 0000:00:1f.2: reg 10: [io  0xff00-0xff07]
>pci 0000:00:1f.2: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:1f.2: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:1f.2: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:1f.2: reg 20: [io  0xfb00-0xfb1f]
>pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
>pci 0000:01:00.0: [10de:0ca3] type 00 class 0x030000
>pci 0000:01:00.0: reg 10: [mem 0xf9000000-0xf9ffffff]
>pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref]
>pci 0000:01:00.0: reg 24: [io  0xcf00-0xcf7f]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
>pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
>pci 0000:01:00.1: reg 10: [mem 0xfaffc000-0xfaffffff]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:03:00.0: [1283:8892] type 01 class 0x060401
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
>pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.3:   bridge window [mem 0xfbc00000-0xfbcfffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1c.3:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:1c.3:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
>pci 0000:04:00.0: [4444:0016] type 00 class 0x040000
>pci 0000:04:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
>pci 0000:04:01.0: [9005:0081] type 00 class 0x010000
>pci 0000:04:01.0: reg 10: [io  0xb800-0xb8ff]
>pci 0000:04:01.0: reg 14: [mem 0xfbcff000-0xfbcfffff 64bit]
>pci 0000:04:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:04:02.0: [1106:3044] type 00 class 0x0c0010
>pci 0000:04:02.0: reg 10: [mem 0xfbcfe000-0xfbcfe7ff]
>pci 0000:04:02.0: reg 14: [io  0xbf00-0xbf7f]
>pci 0000:04:02.0: supports D2
>pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
>pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:03:00.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:03:00.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
>pci 0000:03:00.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci 0000:03:00.0:   bridge window [io  0xb000-0xbfff] (subtractive decode)
>pci 0000:03:00.0:   bridge window [mem 0xfbc00000-0xfbcfffff] (subtractive decode)
>pci 0000:03:00.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] (subtractive decode)
>pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:03:00.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:03:00.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>pci 0000:03:00.0:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
>pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
>pci 0000:05:00.0: reg 10: [mem 0xfbbf8000-0xfbbfffff 64bit]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1c.4: PCI bridge to [bus 05-05]
>pci 0000:00:1c.4:   bridge window [mem 0xfbb00000-0xfbbfffff]
>pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
>pci 0000:06:00.0: reg 10: [mem 0xfbaf8000-0xfbafffff 64bit]
>pci 0000:06:00.0: supports D1 D2
>pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1c.5: PCI bridge to [bus 06-06]
>pci 0000:00:1c.5:   bridge window [mem 0xfba00000-0xfbafffff]
>pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
>pci 0000:07:00.0: reg 10: [io  0xee00-0xeeff]
>pci 0000:07:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref]
>pci 0000:07:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
>pci 0000:07:00.0: supports D1 D2
>pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1c.6: PCI bridge to [bus 07-07]
>pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.6:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
>pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
>pci 0000:08:00.0: reg 10: [io  0xdf00-0xdf07]
>pci 0000:08:00.0: reg 14: [io  0xde00-0xde03]
>pci 0000:08:00.0: reg 18: [io  0xdd00-0xdd07]
>pci 0000:08:00.0: reg 1c: [io  0xdc00-0xdc03]
>pci 0000:08:00.0: reg 20: [io  0xdb00-0xdb0f]
>pci 0000:08:00.0: reg 24: [mem 0xfbdff000-0xfbdff1ff]
>pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:08:00.0: PME# supported from D3hot
>pci 0000:00:1c.7: PCI bridge to [bus 08-08]
>pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.7:   bridge window [mem 0xfbd00000-0xfbdfffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>wmi: Mapper loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
>reserve RAM buffer: 00000000cf780000 - 00000000cfffffff 
>reserve RAM buffer: 000000042f800000 - 000000042fffffff 
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-3f]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: [mem 0xd0000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x004d]
>pnp 00:01: [io  0x0050-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0290-0x029f]
>pnp 00:01: [io  0x0800-0x0805]
>pnp 00:01: [io  0x0290-0x0294]
>pnp 00:01: [io  0x0880-0x088f]
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0290-0x029f] has been reserved
>system 00:01: [io  0x0800-0x0805] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: [io  0x0880-0x088f] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0080-0x0090]
>pnp 00:02: [io  0x0094-0x009f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [irq 0 disabled]
>pnp 00:03: [irq 8]
>pnp 00:03: [mem 0xfed00000-0xfed003ff]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: [io  0x0070-0x0073]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x00f0-0x00ff]
>pnp 00:06: [irq 13]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: [io  0x03f8-0x03ff]
>pnp 00:07: [irq 4]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:08: [io  0x0400-0x04cf]
>pnp 00:08: [io  0x04d2-0x04ff]
>system 00:08: [io  0x0400-0x04cf] has been reserved
>system 00:08: [io  0x04d2-0x04ff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [io  0x1000-0x107f]
>pnp 00:09: [io  0x1080-0x10ff]
>pnp 00:09: [io  0x1100-0x117f]
>pnp 00:09: [io  0x1180-0x11ff]
>system 00:09: [io  0x1000-0x107f] has been reserved
>system 00:09: [io  0x1080-0x10ff] has been reserved
>system 00:09: [io  0x1100-0x117f] has been reserved
>system 00:09: [io  0x1180-0x11ff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
>pnp 00:0a: [io  0x0454-0x0457]
>system 00:0a: [io  0x0454-0x0457] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
>system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0x000d0a00-0x000d3fff]
>pnp 00:0c: [mem 0x000f0000-0x000f7fff]
>pnp 00:0c: [mem 0x000f8000-0x000fbfff]
>pnp 00:0c: [mem 0x000fc000-0x000fffff]
>pnp 00:0c: [mem 0xcf780000-0xcf7dffff]
>pnp 00:0c: [mem 0x00000000-0x0009ffff]
>pnp 00:0c: [mem 0x00100000-0xcf77ffff]
>pnp 00:0c: [mem 0xcf7e0000-0xcf7fffff]
>pnp 00:0c: [mem 0xfec00000-0xfec00fff]
>pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
>pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
>pnp 00:0c: [mem 0xfee00000-0xfee00fff]
>pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
>pnp 00:0c: [mem 0xfff00000-0xffffffff]
>pnp 00:0c: [mem 0x000e0000-0x000effff]
>pnp 00:0c: [mem 0x20000000-0x201fffff]
>pnp 00:0c: [mem 0x40000000-0x400fffff]
>pnp 00:0c: [mem 0xcf800000-0xcfffffff]
>system 00:0c: [mem 0x000d0a00-0x000d3fff] has been reserved
>system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:0c: [mem 0xcf780000-0xcf7dffff] could not be reserved
>system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0c: [mem 0x00100000-0xcf77ffff] could not be reserved
>system 00:0c: [mem 0xcf7e0000-0xcf7fffff] has been reserved
>system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
>system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
>system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
>system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
>system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
>system 00:0c: [mem 0x40000000-0x400fffff] could not be reserved
>system 00:0c: [mem 0xcf800000-0xcfffffff] could not be reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:0d: [mem 0xffb80000-0xffbfffff]
>pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02-02] add_size 1000
>pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
>pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
>pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>pci 0000:00:1c.0: BAR 8: assigned [mem 0xf8000000-0xf81fffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
>pci 0000:00:1c.7: BAR 9: assigned [mem 0xf8400000-0xf84fffff pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
>pci 0000:04:01.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
>pci 0000:03:00.0: PCI bridge to [bus 04-04]
>pci 0000:03:00.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:03:00.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
>pci 0000:03:00.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 03-04]
>pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:1c.3:   bridge window [mem 0xfbc00000-0xfbcfffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 05-05]
>pci 0000:00:1c.4:   bridge window [mem 0xfbb00000-0xfbbfffff]
>pci 0000:00:1c.5: PCI bridge to [bus 06-06]
>pci 0000:00:1c.5:   bridge window [mem 0xfba00000-0xfbafffff]
>pci 0000:00:1c.6: PCI bridge to [bus 07-07]
>pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.6:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
>pci 0000:08:00.0: BAR 6: assigned [mem 0xf8400000-0xf840ffff pref]
>pci 0000:00:1c.7: PCI bridge to [bus 08-08]
>pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.7:   bridge window [mem 0xfbd00000-0xfbdfffff]
>pci 0000:00:1c.7:   bridge window [mem 0xf8400000-0xf84fffff pref]
>pci 0000:00:1c.0: enabling device (0000 -> 0003)
>pci 0000:03:00.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf81fffff]
>pci_bus 0000:02: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
>pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:03: resource 9 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
>pci_bus 0000:04: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci_bus 0000:04: resource 4 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 5 [mem 0xfbc00000-0xfbcfffff]
>pci_bus 0000:04: resource 6 [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci_bus 0000:04: resource 8 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 9 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 11 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:04: resource 12 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:04: resource 13 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
>pci_bus 0000:06: resource 1 [mem 0xfba00000-0xfbafffff]
>pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:07: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
>pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
>pci_bus 0000:08: resource 2 [mem 0xf8400000-0xf84fffff pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP: reno registered
>UDP hash table entries: 8192 (order: 6, 262144 bytes)
>UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>NET: Registered protocol family 1
>pci 0000:00:1a.0: EHCI: BIOS handoff
>pci 0000:00:1d.0: EHCI: BIOS handoff
>pci 0000:01:00.0: Boot video device
>PCI: CLS 4 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 6316k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800cb76e000 - ffff8800cf76e000
>software IO TLB at phys 0xcb76e000 - 0xcf76e000
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>msgmni has been set to 32070
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: Requesting acpi_cpufreq
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: acpi_idle registered with cpuidle
>modprobe used greatest stack depth: 5384 bytes left
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>MXM: GUID detected in BIOS
>VGA switcheroo: detected Optimus DSM method \ handle
>[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a3180a2)
>[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 70.15.2c.00
>[drm] nouveau 0000:01:00.0: TMDS table version 2.0
>[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
>[drm] nouveau 0000:01:00.0: DCB version 4.0
>[drm] nouveau 0000:01:00.0: DCB outp 00: 01000302 00020030
>[drm] nouveau 0000:01:00.0: DCB outp 01: 02000300 00000000
>[drm] nouveau 0000:01:00.0: DCB outp 02: 01011310 00000000
>[drm] nouveau 0000:01:00.0: DCB outp 03: 02022362 00020010
>[drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
>[drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
>[drm] nouveau 0000:01:00.0: DCB conn 02: 00002261
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x655B
>[drm] nouveau 0000:01:00.0: 0x68BD: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 0x68C1: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x6AD2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7F25
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x7F63
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x819D
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8202
>[drm] nouveau 0000:01:00.0: 0x8202: Condition still not met after 20ms, skipping following opcodes
>[TTM] Zone  kernel: Available graphics memory: 8210026 kiB
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (GDDR5)
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:01:00.0: 3 available performance level(s)
>[drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 900mV
>[drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 900mV
>[drm] nouveau 0000:01:00.0: 3: core 550MHz shader 1340MHz memory 1700MHz voltage 1000mV
>[drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 324MHz voltage 900mV fanspeed 100%
>[drm] nouveau 0000:01:00.0: allocated 2560x1440 fb: 0x380000, bo ffff880417d81800
>fbcon: nouveaufb (fb0) is primary device
>[drm] nouveau 0000:01:00.0: GPU lockup - switching to software fbcon
>Console: switching to colour frame buffer device 320x90
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:07:00.0: irq 41 for MSI/MSI-X
>r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000187e000, 50:e5:49:c4:e7:df, XID 0c900800 IRQ 41
>r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
>ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
>ehci_hcd 0000:00:1a.0: support lpm
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
>ehci_hcd 0000:00:1a.0: supports USB remote wakeup
>ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
>ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.4.0-rc4+ ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
>ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
>ehci_hcd 0000:00:1d.0: support lpm
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
>ehci_hcd 0000:00:1d.0: supports USB remote wakeup
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
>ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.4.0-rc4+ ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>xhci_hcd 0000:05:00.0: xHCI Host Controller
>xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
>xhci_hcd 0000:05:00.0: supports USB remote wakeup
>xhci_hcd 0000:05:00.0: irq 16, io mem 0xfbbf8000
>xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
>usb usb3: default language 0x0409
>usb usb3: udev 1, busnum 3, minor = 256
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: xHCI Host Controller
>usb usb3: Manufacturer: Linux 3.4.0-rc4+ xhci_hcd
>usb usb3: SerialNumber: 0000:05:00.0
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: individual port power switching
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: Single TT
>hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 3-0:1.0: power on to power good time: 20ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: enabling power on all ports
>xhci_hcd 0000:05:00.0: xHCI Host Controller
>xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
>xhci_hcd 0000:05:00.0: supports USB remote wakeup
>usb usb4: skipped 1 descriptor after endpoint
>usb usb4: default language 0x0409
>usb usb4: udev 1, busnum 4, minor = 384
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: xHCI Host Controller
>usb usb4: Manufacturer: Linux 3.4.0-rc4+ xhci_hcd
>usb usb4: SerialNumber: 0000:05:00.0
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: individual port power switching
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 4-0:1.0: power on to power good time: 20ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: enabling power on all ports
>xhci_hcd 0000:06:00.0: xHCI Host Controller
>xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
>xhci_hcd 0000:06:00.0: supports USB remote wakeup
>xhci_hcd 0000:06:00.0: irq 17, io mem 0xfbaf8000
>xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
>usb usb5: default language 0x0409
>usb usb5: udev 1, busnum 5, minor = 512
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: xHCI Host Controller
>usb usb5: Manufacturer: Linux 3.4.0-rc4+ xhci_hcd
>usb usb5: SerialNumber: 0000:06:00.0
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: individual port power switching
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: Single TT
>hub 5-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 5-0:1.0: power on to power good time: 20ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: enabling power on all ports
>xhci_hcd 0000:06:00.0: xHCI Host Controller
>xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
>xhci_hcd 0000:06:00.0: supports USB remote wakeup
>usb usb6: skipped 1 descriptor after endpoint
>usb usb6: default language 0x0409
>usb usb6: udev 1, busnum 6, minor = 640
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: xHCI Host Controller
>usb usb6: Manufacturer: Linux 3.4.0-rc4+ xhci_hcd
>usb usb6: SerialNumber: 0000:06:00.0
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: individual port power switching
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 6-0:1.0: power on to power good time: 20ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: enabling power on all ports
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
>i8042: If AUX port is really absent please use the 'i8042.noaux' option
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 1: status 0501 change 0001
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: port 2: status 0101 change 0001
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>Refined TSC clocksource calibration: 3410.014 MHz.
>Switching to clocksource tsc
>hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1a.0: port 1 high speed
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>TCP: cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>rtc_cmos 00:04: setting system clock to 2012-04-22 15:40:02 UTC (1335109202)
>Freeing unused kernel memory: 524k freed
>Write protecting the kernel read-only data: 8192k
>Freeing unused kernel memory: 1828k freed
>Freeing unused kernel memory: 776k freed
>usb 1-1: new high-speed USB device number 2 using ehci_hcd
>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>udevd[724]: starting version 182
>udevadm used greatest stack depth: 5224 bytes left
>ehci_hcd 0000:00:1a.0: port 1 high speed
>ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 44
>ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 44
>ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 44
>ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 44
>ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 44
>ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 44
>ahci 0000:08:00.0: irq 45 for MSI/MSI-X
>ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
>scsi6 : ahci
>scsi7 : ahci
>ata8: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 45
>ata9: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 45
>ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
>ehci_hcd 0000:00:1a.0: LPM: no device attached
>usb 1-1: udev 2, busnum 1, minor = 1
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: usb_probe_device
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
>hub 1-1:1.0: usb_probe_interface
>hub 1-1:1.0: usb_probe_interface - got id
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>hub 1-1:1.0: standalone hub
>hub 1-1:1.0: individual port power switching
>hub 1-1:1.0: individual port over-current protection
>hub 1-1:1.0: Single TT
>hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-1:1.0: power on to power good time: 100ms
>hub 1-1:1.0: local power source is good
>hub 1-1:1.0: enabling power on all ports
>hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.0: port 1 high speed
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>hub 1-1:1.0: port 3: status 0101 change 0001
>hub 1-1:1.0: port 4: status 0101 change 0001
>hub 1-1:1.0: port 5: status 0101 change 0001
>hub 1-1:1.0: port 6: status 0101 change 0001
>usb 2-1: new high-speed USB device number 2 using ehci_hcd
>ehci_hcd 0000:00:1d.0: port 1 high speed
>ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-1: link qh256-0001/ffff8804184be700 start 1 [1/0 us]
>ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
>ehci_hcd 0000:00:1d.0: LPM: no device attached
>usb 2-1: udev 2, busnum 2, minor = 129
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: usb_probe_device
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: adding 2-1:1.0 (config #1, interface 0)
>hub 2-1:1.0: usb_probe_interface
>hub 2-1:1.0: usb_probe_interface - got id
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>hub 2-1:1.0: standalone hub
>hub 2-1:1.0: individual port power switching
>hub 2-1:1.0: individual port over-current protection
>hub 2-1:1.0: Single TT
>hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 2-1:1.0: power on to power good time: 100ms
>hub 2-1:1.0: local power source is good
>hub 2-1:1.0: enabling power on all ports
>hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000
>hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
>ata9: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>usb 2-1: link qh256-0001/ffff88041cfa6980 start 1 [1/0 us]
>usb 5-2: new low-speed USB device number 2 using xhci_hcd
>usb 5-2: skipped 1 descriptor after interface
>usb 5-2: default language 0x0409
>usb 5-2: udev 2, busnum 5, minor = 513
>usb 5-2: New USB device found, idVendor=0665, idProduct=5161
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: USB to Serial
>usb 5-2: Manufacturer: Cypress Semiconductor
>usb 5-2: usb_probe_device
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: Successful Endpoint Configure command
>usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>usbhid 5-2:1.0: usb_probe_interface
>usbhid 5-2:1.0: usb_probe_interface - got id
>usbhid 5-2:1.0: looking for a minor, starting at 96
>generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:06:00.0-2/input0
>hub 1-1:1.0: state 7 ports 6 chg 0078 evt 0000
>hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
>hub 1-1:1.0: port 3 not reset yet, waiting 10ms
>usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
>hub 1-1:1.0: port 3 not reset yet, waiting 10ms
>usb 1-1.3: udev 3, busnum 1, minor = 2
>usb 1-1.3: New USB device found, idVendor=0451, idProduct=8042
>usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1.3: usb_probe_device
>usb 1-1.3: configuration #1 chosen from 1 choice
>usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
>hub 1-1.3:1.0: usb_probe_interface
>hub 1-1.3:1.0: usb_probe_interface - got id
>hub 1-1.3:1.0: USB hub found
>hub 1-1.3:1.0: 4 ports detected
>hub 1-1.3:1.0: standalone hub
>hub 1-1.3:1.0: ganged power switching
>hub 1-1.3:1.0: global over-current protection
>hub 1-1.3:1.0: TT per port
>hub 1-1.3:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-1.3:1.0: power on to power good time: 100ms
>hub 1-1.3:1.0: local power source is good
>hub 1-1.3:1.0: no over-current condition exists
>hub 1-1.3:1.0: enabling power on all ports
>hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
>hub 1-1:1.0: port 4 not reset yet, waiting 10ms
>usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
>hub 1-1:1.0: port 4 not reset yet, waiting 10ms
>hub 1-1.3:1.0: port 2: status 0101 change 0001
>hub 1-1.3:1.0: port 3: status 0101 change 0001
>usb 1-1.4: ep0 maxpacket = 8
>usb 1-1.4: skipped 4 descriptors after interface
>usb 1-1.4: skipped 2 descriptors after interface
>usb 1-1.4: skipped 1 descriptor after endpoint
>usb 1-1.4: skipped 2 descriptors after interface
>usb 1-1.4: skipped 1 descriptor after endpoint
>usb 1-1.4: udev 4, busnum 1, minor = 3
>usb 1-1.4: New USB device found, idVendor=046d, idProduct=08ad
>usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1.4: usb_probe_device
>usb 1-1.4: configuration #1 chosen from 1 choice
>usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
>usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
>usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
>hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
>hub 1-1:1.0: port 5 not reset yet, waiting 10ms
>usb 1-1.3: link qh256-0001/ffff88041cfa6280 start 2 [1/0 us]
>usb 1-1.5: new high-speed USB device number 5 using ehci_hcd
>hub 1-1:1.0: port 5 not reset yet, waiting 10ms
>usb 1-1.5: default language 0x0409
>usb 1-1.5: udev 5, busnum 1, minor = 4
>usb 1-1.5: New USB device found, idVendor=03f0, idProduct=3307
>usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1.5: Product: v125w
>usb 1-1.5: Manufacturer: HP
>usb 1-1.5: SerialNumber: 6E93061203FD
>usb 1-1.5: usb_probe_device
>usb 1-1.5: configuration #1 chosen from 1 choice
>usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
>hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
>Initializing USB Mass Storage driver...
>usb-storage 1-1.5:1.0: usb_probe_interface
>usb-storage 1-1.5:1.0: usb_probe_interface - got id
>scsi9 : usb-storage 1-1.5:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>hub 1-1:1.0: port 6 not reset yet, waiting 10ms
>usb 1-1.6: new full-speed USB device number 6 using ehci_hcd
>hub 1-1:1.0: port 6 not reset yet, waiting 10ms
>usb 1-1.6: udev 6, busnum 1, minor = 5
>usb 1-1.6: New USB device found, idVendor=0a12, idProduct=0001
>usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1.6: usb_probe_device
>usb 1-1.6: configuration #1 chosen from 1 choice
>usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
>usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
>hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
>hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0020
>hub 1-1.3:1.0: state 7 ports 4 chg 000c evt 0000
>hub 1-1.3:1.0: port 2, status 0101, change 0000, 12 Mb/s
>hub 1-1.3:1.0: port 2 not reset yet, waiting 10ms
>usb 1-1.3.2: new full-speed USB device number 7 using ehci_hcd
>hub 1-1.3:1.0: port 2 not reset yet, waiting 10ms
>usb 1-1.3.2: ep0 maxpacket = 8
>usb 1-1.3.2: default language 0x0409
>usb 1-1.3.2: udev 7, busnum 1, minor = 6
>usb 1-1.3.2: New USB device found, idVendor=05a4, idProduct=9835
>usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.2: Product: USB Keyboard Hub
>usb 1-1.3.2: Manufacturer: ORTEK
>usb 1-1.3.2: usb_probe_device
>usb 1-1.3.2: configuration #1 chosen from 1 choice
>usb 1-1.3.2: adding 1-1.3.2:1.0 (config #1, interface 0)
>hub 1-1.3.2:1.0: usb_probe_interface
>hub 1-1.3.2:1.0: usb_probe_interface - got id
>hub 1-1.3.2:1.0: USB hub found
>hub 1-1.3.2:1.0: 3 ports detected
>hub 1-1.3.2:1.0: compound device; port removable status: RRF
>hub 1-1.3.2:1.0: individual port power switching
>hub 1-1.3.2:1.0: individual port over-current protection
>hub 1-1.3.2:1.0: power on to power good time: 100ms
>hub 1-1.3.2:1.0: hub controller current requirement: 100mA
>hub 1-1.3.2:1.0: 100mA bus power budget for each child
>hub 1-1.3.2:1.0: local power source is lost (inactive)
>hub 1-1.3.2:1.0: enabling power on all ports
>hub 1-1.3:1.0: port 3, status 0101, change 0000, 12 Mb/s
>hub 1-1.3:1.0: port 3 not reset yet, waiting 10ms
>usb 1-1.3.3: new full-speed USB device number 8 using ehci_hcd
>hub 1-1.3:1.0: port 3 not reset yet, waiting 10ms
>hub 1-1.3.2:1.0: port 1: status 0301 change 0001
>hub 1-1.3.2:1.0: port 2: status 0301 change 0001
>hub 1-1.3.2:1.0: port 3: status 0101 change 0001
>usb 1-1.3.3: skipped 8 descriptors after interface
>usb 1-1.3.3: skipped 2 descriptors after interface
>usb 1-1.3.3: skipped 1 descriptor after endpoint
>usb 1-1.3.3: skipped 2 descriptors after interface
>usb 1-1.3.3: skipped 1 descriptor after endpoint
>usb 1-1.3.3: default language 0x0409
>usb 1-1.3.3: udev 8, busnum 1, minor = 7
>usb 1-1.3.3: New USB device found, idVendor=046d, idProduct=0a14
>usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.3: Product: Logitech USB Headset
>usb 1-1.3.3: Manufacturer: Logitech
>usb 1-1.3.3: usb_probe_device
>usb 1-1.3.3: configuration #1 chosen from 1 choice
>usb 1-1.3.2: link qh128-0e01/ffff88041c948680 start 3 [1/2 us]
>usb 1-1.3.3: adding 1-1.3.3:1.0 (config #1, interface 0)
>usb 1-1.3.3: adding 1-1.3.3:1.1 (config #1, interface 1)
>usb 1-1.3.3: adding 1-1.3.3:1.2 (config #1, interface 2)
>hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0008
>hub 1-1.3.2:1.0: state 7 ports 3 chg 000e evt 0000
>hub 1-1.3.2:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>usb 1-1.3.2.1: new low-speed USB device number 9 using ehci_hcd
>usb 1-1.3.2.1: skipped 1 descriptor after interface
>usb 1-1.3.2.1: default language 0x0409
>usb 1-1.3.2.1: udev 9, busnum 1, minor = 8
>usb 1-1.3.2.1: New USB device found, idVendor=047d, idProduct=4006
>usb 1-1.3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.2.1: Product: Eliminator AfterShock   
>usb 1-1.3.2.1: Manufacturer: Gravis
>usb 1-1.3.2.1: usb_probe_device
>usb 1-1.3.2.1: configuration #1 chosen from 1 choice
>usb 1-1.3.2.1: adding 1-1.3.2.1:1.0 (config #1, interface 0)
>usbhid 1-1.3.2.1:1.0: usb_probe_interface
>usbhid 1-1.3.2.1:1.0: usb_probe_interface - got id
>input: Gravis Eliminator AfterShock    as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2.1/1-1.3.2.1:1.0/input/input2
>generic-usb 0003:047D:4006.0002: input,hidraw1: USB HID v1.10 Gamepad [Gravis Eliminator AfterShock   ] on usb-0000:00:1a.0-1.3.2.1/input0
>hub 1-1.3.2:1.0: 300mA power budget left
>hub 1-1.3.2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
>usb 1-1.3.2.2: new low-speed USB device number 10 using ehci_hcd
>usb 1-1.3.2.2: skipped 1 descriptor after interface
>usb 1-1.3.2.2: default language 0x0409
>usb 1-1.3.2.2: udev 10, busnum 1, minor = 9
>usb 1-1.3.2.2: New USB device found, idVendor=046d, idProduct=c404
>usb 1-1.3.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.2.2: Product: Trackball
>usb 1-1.3.2.2: Manufacturer: Logitech
>usb 1-1.3.2.2: usb_probe_device
>usb 1-1.3.2.2: configuration #1 chosen from 1 choice
>usb 1-1.3.2.2: adding 1-1.3.2.2:1.0 (config #1, interface 0)
>usbhid 1-1.3.2.2:1.0: usb_probe_interface
>usbhid 1-1.3.2.2:1.0: usb_probe_interface - got id
>input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2.2/1-1.3.2.2:1.0/input/input3
>generic-usb 0003:046D:C404.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.3.2.2/input0
>hub 1-1.3.2:1.0: 200mA power budget left
>hub 1-1.3.2:1.0: port 3, status 0101, change 0000, 12 Mb/s
>usb 1-1.3.2.3: new full-speed USB device number 11 using ehci_hcd
>scsi 9:0:0:0: Direct-Access     HP       v125w            PMAP PQ: 0 ANSI: 0 CCS
>scsi_scan_9 used greatest stack depth: 4888 bytes left
>usb 1-1.3.2.3: ep0 maxpacket = 8
>usb 1-1.3.2.3: skipped 1 descriptor after interface
>usb 1-1.3.2.3: skipped 1 descriptor after interface
>usb 1-1.3.2.3: default language 0x0409
>usb 1-1.3.2.3: udev 11, busnum 1, minor = 10
>usb 1-1.3.2.3: New USB device found, idVendor=05a4, idProduct=9860
>usb 1-1.3.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.2.3: Product: USB Keyboard Hub
>usb 1-1.3.2.3: Manufacturer: ORTEK
>usb 1-1.3.2.3: usb_probe_device
>usb 1-1.3.2.3: configuration #1 chosen from 1 choice
>usb 1-1.3.2.3: adding 1-1.3.2.3:1.0 (config #1, interface 0)
>usbhid 1-1.3.2.3:1.0: usb_probe_interface
>usbhid 1-1.3.2.3:1.0: usb_probe_interface - got id
>input: ORTEK USB Keyboard Hub as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2.3/1-1.3.2.3:1.0/input/input4
>usb 1-1.3.2.3: link qh8-0e01/ffff88041c948b80 start 4 [1/2 us]
>generic-usb 0003:05A4:9860.0004: input,hidraw3: USB HID v1.10 Keyboard [ORTEK USB Keyboard Hub] on usb-0000:00:1a.0-1.3.2.3/input0
>usb 1-1.3.2.3: adding 1-1.3.2.3:1.1 (config #1, interface 1)
>usbhid 1-1.3.2.3:1.1: usb_probe_interface
>usbhid 1-1.3.2.3:1.1: usb_probe_interface - got id
>input: ORTEK USB Keyboard Hub as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2.3/1-1.3.2.3:1.1/input/input5
>usb 1-1.3.2.3: link qh16-0e01/ffff88041c948f00 start 5 [1/2 us]
>generic-usb 0003:05A4:9860.0005: input,hidraw4: USB HID v1.10 Device [ORTEK USB Keyboard Hub] on usb-0000:00:1a.0-1.3.2.3/input1
>hub 1-1.3.2:1.0: 152mA power budget left
>hub 1-1.3.2:1.0: state 7 ports 3 chg 0000 evt 0008
>scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 19160B Ultra160 SCSI adapter>
>        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>scsi 8:0:0:0: Direct-Access     COMPAQPC MAM3184MP        1806 PQ: 0 ANSI: 2
>scsi8:A:0:0: Tagged Queuing enabled.  Depth 32
>scsi target8:0:0: Beginning Domain Validation
>scsi target8:0:0: wide asynchronous
>scsi target8:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
>scsi target8:0:0: Ending Domain Validation
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
>ata2.00: 62500000 sectors, multi 1: LBA48 NCQ (depth 31)
>ata2.00: configured for UDMA/133
>scsi: waiting for bus probes to complete ...
>scsi_scan_8 used greatest stack depth: 4232 bytes left
>scsi 0:0:0:0: Direct-Access     ATA      SSDSA2SH032G1GN  045C PQ: 0 ANSI: 5
>sd 0:0:0:0: [sdc] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
>sd 0:0:0:0: [sdc] Write Protect is off
>sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: unknown partition table
>sd 0:0:0:0: [sdc] Attached SCSI disk
>sd 9:0:0:0: [sda] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
>sd 9:0:0:0: [sda] Write Protect is off
>sd 9:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 8:0:0:0: [sdb] 35566000 512-byte logical blocks: (18.2 GB/16.9 GiB)
>sd 9:0:0:0: [sda] No Caching mode page present
>sd 9:0:0:0: [sda] Assuming drive cache: write through
>sd 9:0:0:0: [sda] No Caching mode page present
>sd 9:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 9:0:0:0: [sda] No Caching mode page present
>sd 9:0:0:0: [sda] Assuming drive cache: write through
>sd 9:0:0:0: [sda] Attached SCSI removable disk
>sd 8:0:0:0: [sdb] Write Protect is off
>sd 8:0:0:0: [sdb] Mode Sense: bb 00 00 08
>sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>sd 8:0:0:0: [sdb] Attached SCSI disk
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATAPI: TSSTcorp DVDWBD SH-B123L, SB04, max UDMA/100
>ata6.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            TSSTcorp DVDWBD SH-B123L  SB04 PQ: 0 ANSI: 5
>ata7: SATA link down (SStatus 0 SControl 300)
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>dracut: luksOpen /dev/sdb luks-fab13b56-154b-4fff-b453-b84eeeda0ef5 
>dracut: luksOpen /dev/sdc luks-c4a6b3a3-3b8d-4c53-a6fc-631ec87e3836 
>dracut: Scanning devices dm-0 dm-1  for LVM volume groups 
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "beryllium" using metadata type lvm2
>dracut: 3 logical volume(s) in volume group "beryllium" now active
>Btrfs loaded
>device fsid 6346b71e-f3f3-4a60-9ccd-8a9350243363 devid 1 transid 837 /dev/dm-3
>device fsid 5e2c0bb0-4184-4419-bff0-09ab43539e42 devid 1 transid 16024 /dev/dm-4
>dracut: Checking, if btrfs device complete
>device fsid 6346b71e-f3f3-4a60-9ccd-8a9350243363 devid 1 transid 837 /dev/mapper/beryllium-root
>Btrfs detected SSD devices, enabling SSD mode
>mount used greatest stack depth: 3904 bytes left
>device fsid 6346b71e-f3f3-4a60-9ccd-8a9350243363 devid 1 transid 837 /dev/mapper/beryllium-root
>Btrfs detected SSD devices, enabling SSD mode
>dracut: Checking btrfs: /dev/beryllium/root
>dracut: trying to mount /dev/beryllium/root
>device fsid 6346b71e-f3f3-4a60-9ccd-8a9350243363 devid 1 transid 837 /dev/mapper/beryllium-root
>Btrfs detected SSD devices, enabling SSD mode
>dracut: btrfs: /dev/beryllium/root is clean
>umount used greatest stack depth: 3536 bytes left
>dracut: Remounting /dev/beryllium/root with -o noatime,compress,autodefrag,ro
>device fsid 6346b71e-f3f3-4a60-9ccd-8a9350243363 devid 1 transid 840 /dev/mapper/beryllium-root
>btrfs: use zlib compression
>btrfs: enabling auto defrag
>Btrfs detected SSD devices, enabling SSD mode
>dracut: Mounted root filesystem /dev/mapper/beryllium-root
>dracut: Switching root
>init-early.sh used greatest stack depth: 2928 bytes left
>snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>hda_intel: Disabling MSI
>input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
>input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
>input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
>input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
>btrfs: use zlib compression
>btrfs: enabling auto defrag
>Adding 13586428k swap on /dev/mapper/beryllium-swap.  Priority:-1 extents:1 across:13586428k 
>REISERFS (device sda1): found reiserfs format "3.6" with standard journal
>REISERFS (device sda1): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda1): checking transaction log (sda1)
>REISERFS (device sda1): Using r5 hash to sort names
>alsactl used greatest stack depth: 2896 bytes left
>usb 1-1.3.2.2: link qh8-0e01/ffff880418143b80 start 6 [1/2 us]
>r8169 0000:07:00.0: eth0: link down
>r8169 0000:07:00.0: eth0: link up
>NET: Registered protocol family 10
>eth0: no IPv6 routers present
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>FS-Cache: Loaded
>NFS: Registering the id_resolver key type
>FS-Cache: Netfs 'nfs' registered for caching
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40
>[drm] nouveau 0000:01:00.0: PGRAPH TLB flush idle timeout fail: 0x011fde03 0x00145b4d 0x0000002d 0x0034db40

Actions: View

Attachments on bug 49057: 60456 | 60457 | 60458

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.