Attachment 61354 Details for Bug 49727 – dmesg

dmesg

dmesg.log (text/plain), 53.89 KB, created by Andrew Randrianasulu on 2012-05-10 05:12:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Randrianasulu

Created: 2012-05-10 05:12:53 UTC

Size: 53.89 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.4.0-rc5-nouveau+ (guest@slax) (gcc version 4.5.2 (GCC) ) #11 SMP Tue May 1 14:32:53 GMT 2012
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
> BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
> BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
>Notice: NX (Execute Disable) protection missing in CPU!
>DMI 2.3 present.
>DMI:                  /D845PESV                       , BIOS SV84510A.86A.0006.P02.0208220046 08/22/2002
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x1ff40 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-DFFFF uncachable
>  E0000-FFFFF write-back
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 00800000
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: 0000000000000000-000000001ff40000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 001fc00000 page 2M
> 001fc00000 - 001ff40000 page 4k
>kernel direct mapping tables up to 1ff40000 @ 7fb000-800000
>ACPI: RSDP 000f76d0 00014 (v00 ACPIAM)
>ACPI: RSDT 1ff40000 00030 (v01 INTEL  D845PESV 20020822 MSFT 00000097)
>ACPI: FACP 1ff40200 00081 (v02 INTEL  D845PESV 20020822 MSFT 00000097)
>ACPI: DSDT 1ff40400 03F21 (v01 INTEL  D845PESV 0000010A MSFT 0100000D)
>ACPI: FACS 1ff50000 00040
>ACPI: APIC 1ff40300 00068 (v01 INTEL  D845PESV 20020822 MSFT 00000097)
>ACPI: ASF! 1ff44330 00084 (v16 AMIASF I845GASF 00000001 MSFT 0100000D)
>ACPI: Local APIC address 0xfee00000
>0MB HIGHMEM available.
>511MB LOWMEM available.
>  mapped low ram: 0 - 1ff40000
>  low ram: 0 - 1ff40000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x0001ff40
>  HighMem  empty
>Movable zone start PFN for each node
>Early memory PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0001ff40
>On node 0 totalpages: 130767
>free_area_init_node: node 0, pgdat c0505f40, node_mem_map dfb3f200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125793 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000)
>setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @df400000 s29184 r0 d24064 u2097152
>pcpu-alloc: s29184 r0 d24064 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129744
>Kernel command line: BOOT_IMAGE=Lin-3.4-rc5-nv ro root=302 nocd vt.default_utf8=0
>PID hash table entries: 2048 (order: 1, 8192 bytes)
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Initializing CPU#0
>allocated 1046912 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 512476k/523520k available (2770k kernel code, 10592k reserved, 1379k data, 356k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe76000 - 0xfffff000   (1572 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0740000 - 0xff7fe000   ( 496 MB)
>    lowmem  : 0xc0000000 - 0xdff40000   ( 511 MB)
>      .init : 0xc050e000 - 0xc0567000   ( 356 kB)
>      .data : 0xc03b49d2 - 0xc050d880   (1379 kB)
>      .text : 0xc0100000 - 0xc03b49d2   (2770 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:2304 nr_irqs:512 16
>CPU 0 irqstacks, hard=df008000 soft=df00a000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 1799.722 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.44 BogoMIPS (lpj=7198888)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>CPU0: Hyper-Threading is disabled
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20120320
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
>Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>... version:                0
>... bit width:              40
>... generic registers:      18
>... value mask:             000000ffffffffff
>... max period:             0000007fffffffff
>... fixed-purpose events:   0
>... event mask:             000000000003ffff
>Brought up 1 CPUs
>Total of 1 processors activated (3599.44 BogoMIPS).
>PM: Registering ACPI NVS region [mem 0x1ff50000-0x1fffffff] (720896 bytes)
>atomic64 test passed for i386+ platform with CX8 and with SSE
>dummy: 
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 2 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
>PCI: root bus 00: using default resources
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
>pci 0000:00:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
>pci 0000:00:01.0: [8086:2561] type 01 class 0x060400
>pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
>pci 0000:00:1d.0: reg 20: [io  0xe800-0xe81f]
>pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
>pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
>pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
>pci 0000:00:1d.2: reg 20: [io  0xec00-0xec1f]
>pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
>pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
>pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
>pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
>pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
>pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
>pci 0000:00:1f.5: reg 10: [io  0xe400-0xe4ff]
>pci 0000:00:1f.5: reg 14: [io  0xe080-0xe0bf]
>pci 0000:00:1f.5: reg 18: [mem 0xfebff800-0xfebff9ff]
>pci 0000:00:1f.5: reg 1c: [mem 0xfebff400-0xfebff4ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: [10de:00f1] type 00 class 0x030000
>pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
>pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref]
>pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff]
>pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [mem 0xfa800000-0xfe8fffff]
>pci 0000:00:01.0:   bridge window [mem 0xd2500000-0xf25fffff pref]
>pci 0000:02:02.0: [1095:3114] type 00 class 0x010400
>pci 0000:02:02.0: reg 10: [io  0xdc00-0xdc07]
>pci 0000:02:02.0: reg 14: [io  0xd880-0xd883]
>pci 0000:02:02.0: reg 18: [io  0xd800-0xd807]
>pci 0000:02:02.0: reg 1c: [io  0xd480-0xd483]
>pci 0000:02:02.0: reg 20: [io  0xd400-0xd40f]
>pci 0000:02:02.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
>pci 0000:02:02.0: reg 30: [mem 0xfea00000-0xfea7ffff pref]
>pci 0000:02:02.0: supports D1 D2
>pci 0000:02:08.0: [8086:1039] type 00 class 0x020000
>pci 0000:02:08.0: reg 10: [mem 0xfeafe000-0xfeafefff]
>pci 0000:02:08.0: reg 14: [io  0xd080-0xd0bf]
>pci 0000:02:08.0: supports D1 D2
>pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1e.0:   bridge window [mem 0xfe900000-0xfeafffff]
>pci 0000:00:1e.0:   bridge window [mem 0xf2600000-0xf26fffff pref]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000001ff40000 - 000000001fffffff 
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x00000000 window]
>pnp 00:00: [mem 0x20000000-0xffffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [dma 4]
>pnp 00:01: [io  0x0000-0x000f]
>pnp 00:01: [io  0x0081-0x0083]
>pnp 00:01: [io  0x0087]
>pnp 00:01: [io  0x0089-0x008b]
>pnp 00:01: [io  0x008f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [io  0x0070-0x0071]
>pnp 00:02: [irq 8]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:03: [io  0x0061]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:04: [io  0x00f0-0x00ff]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x0010-0x001f]
>pnp 00:05: [io  0x0022-0x003f]
>pnp 00:05: [io  0x0044-0x005f]
>pnp 00:05: [io  0x0062-0x0063]
>pnp 00:05: [io  0x0065-0x006f]
>pnp 00:05: [io  0x0072-0x007f]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0084-0x0086]
>pnp 00:05: [io  0x0088]
>pnp 00:05: [io  0x008c-0x008e]
>pnp 00:05: [io  0x0090-0x009f]
>pnp 00:05: [io  0x00a2-0x00bf]
>pnp 00:05: [io  0x00e0-0x00ef]
>pnp 00:05: [io  0x04d0-0x04d1]
>system 00:05: [io  0x04d0-0x04d1] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [mem 0xffb80000-0xffbfffff]
>pnp 00:06: [mem 0xfff80000-0xffffffff]
>pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:07: [io  0x03f0-0x03f1]
>pnp 00:07: [io  0x03f2-0x03f3]
>pnp 00:07: [io  0x03f4-0x03f5]
>pnp 00:07: [io  0x03f7]
>pnp 00:07: [irq 6]
>pnp 00:07: [dma 2]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:08: [io  0x03f8-0x03ff]
>pnp 00:08: [irq 4]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x0378-0x037f]
>pnp 00:09: [irq 7]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:0a: [io  0x0060]
>pnp 00:0a: [io  0x0064]
>pnp 00:0a: [irq 12]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>pnp 00:0b: [io  0x0400-0x047f]
>pnp 00:0b: [io  0x0000-0xffffffff disabled]
>pnp 00:0b: [io  0x0680-0x06ff]
>pnp 00:0b: [io  0x0480-0x04bf]
>pnp 00:0b: [mem 0xfec00000-0xfec00fff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>system 00:0b: [io  0x0400-0x047f] has been reserved
>system 00:0b: [io  0x0680-0x06ff] has been reserved
>system 00:0b: [io  0x0480-0x04bf] has been reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0x00000000-0x0009ffff]
>pnp 00:0c: [mem 0x000c0000-0x000dffff]
>pnp 00:0c: [mem 0x000e0000-0x000fffff]
>pnp 00:0c: [mem 0x00100000-0x1fffffff]
>pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
>system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
>system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0c: [mem 0x00100000-0x1fffffff] could not be reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>Switching to clocksource acpi_pm
>pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [mem 0xfa800000-0xfe8fffff]
>pci 0000:00:01.0:   bridge window [mem 0xd2500000-0xf25fffff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02]
>pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1e.0:   bridge window [mem 0xfe900000-0xfeafffff]
>pci 0000:00:1e.0:   bridge window [mem 0xf2600000-0xf26fffff pref]
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 1 [mem 0xfa800000-0xfe8fffff]
>pci_bus 0000:01: resource 2 [mem 0xd2500000-0xf25fffff pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfeafffff]
>pci_bus 0000:02: resource 2 [mem 0xf2600000-0xf26fffff pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP: reno registered
>UDP hash table entries: 256 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>PCI: CLS 32 bytes, default 64
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1000
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>GHES: HEST is not enabled!
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ramoops: platform device not found, using module parameters
>ramoops: The memory size and the record size must be non-zero
>ramoops: probe of ramoops failed with error -22
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x24cb rev 0x02)
>pci 0000:00:1f.1: enabling device (0005 -> 0007)
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7
>    ide1: BM-DMA at 0xffa8-0xffaf
>Probing IDE interface ide0...
>hda: ST3160023A, ATA DISK drive
>Refined TSC clocksource calibration: 1799.795 MHz.
>Switching to clocksource tsc
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: ST380215A, ATA DISK drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/100 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>hda: max request size: 512KiB
>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>hdc: max request size: 512KiB
>hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
>hdc: cache flushes supported
> hdc: hdc1 hdc2 < hdc5 >
>ide-cd driver 5.00
>i8042: PNP detection disabled
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>EDAC MC: Ver: 2.1.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP: cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>registered taskstats version 1
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>EXT4-fs (hda2): INFO: recovery required on readonly filesystem
>EXT4-fs (hda2): write access will be enabled during recovery
>EXT4-fs (hda2): recovery complete
>EXT4-fs (hda2): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 3:2.
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel text: 2772k
>Write protecting the kernel read-only data: 1144k
>EXT4-fs (hda2): warning: maximal mount count reached, running e2fsck is recommended
>EXT4-fs (hda2): re-mounted. Opts: (null)
>i2c /dev entries driver
>Linux media interface: v0.10
>Linux video capture interface: v2.00
>i2c-core: driver [tuner] using legacy suspend method
>i2c-core: driver [tuner] using legacy resume method
>lp: driver loaded but no devices found
>Linux agpgart interface v0.103
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>fuse init (API version 7.18)
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>Intel ISA PCIC probe: not found.
>Databook TCIC-2 PCMCIA probe: not found.
>udevd (229): /proc/229/oom_adj is deprecated, please use /proc/229/oom_score_adj instead.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:02: RTC can wake from S4
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 114 bytes nvram
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ppdev: user-space parallel port driver
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>wmi: Mapper loaded
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>agpgart-intel 0000:00:00.0: Intel 845G Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>microcode: CPU0 sig=0xf24, pf=0x4, revision=0xb
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>e100 0000:02:08.0: eth0: addr 0xfeafe000, irq 20, MAC addr 00:07:e9:b7:82:c8
>usb 1-2: new high-speed USB device number 2 using ehci_hcd
>snd_intel8x0 0000:00:1f.5: setting latency timer to 64
>[drm] Initialized drm 1.1.0 20060810
>udev: renamed network interface eth0 to eth2
>VGA switcheroo: detected Optimus DSM method \ handle
>[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043000a2)
>[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 05.43.02.36
>[drm] nouveau 0000:01:00.0: TMDS table version 1.1
>[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
>[drm] nouveau 0000:01:00.0: DCB version 3.0
>[drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028
>[drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00000000
>[drm] nouveau 0000:01:00.0: DCB outp 02: 04010312 00000020
>[drm] nouveau 0000:01:00.0: DCB outp 03: 04010310 00000028
>[drm] nouveau 0000:01:00.0: DCB outp 04: 020203f1 0080c083
>[TTM] Zone  kernel: Available graphics memory: 256416 kiB
>[TTM] Initializing pool allocator
>[drm] nouveau 0000:01:00.0: Detected 128MiB VRAM (GDDR3)
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
>[drm] nouveau 0000:01:00.0: Saving VGA fonts
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:01:00.0: 2 available performance level(s)
>[drm] nouveau 0000:01:00.0: 0: core 300MHz shader 300MHz memory 1000MHz voltage 1300mV fanspeed 100%
>[drm] nouveau 0000:01:00.0: 1: core 500MHz shader 500MHz memory 1000MHz voltage 1400mV fanspeed 100%
>[drm] nouveau 0000:01:00.0: c: core 100MHz shader 100MHz memory 501MHz voltage 1300mV fanspeed 100%
>[drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
>[drm] nouveau 0000:01:00.0: 0xD434: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: 0xD484: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
>intel8x0_measure_ac97_clock: measured 359809 usecs (17281 samples)
>intel8x0: clocking to 48000
>usbcore: registered new interface driver uas
>Initializing USB Mass Storage driver...
>scsi0 : usb-storage 1-2:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo dd100c00
>fbcon: nouveaufb (fb0) is primary device
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>Console: switching to colour frame buffer device 160x64
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
>usb 3-1: new low-speed USB device number 2 using uhci_hcd
>input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
>generic-usb 0003:04F3:0103.0001: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.1-1/input0
>input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4
>generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.1-1/input1
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>scsi 0:0:0:0: Direct-Access     JetFlash Transcend 8GB    1100 PQ: 0 ANSI: 0 CCS
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
>sd 0:0:0:0: [sda] No Caching mode page present
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] No Caching mode page present
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: [sda] No Caching mode page present
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NET: Registered protocol family 10
>svc: failed to register lockdv1 RPC service (errno 97).
>NFSD: starting 90-second grace period
>end_request: I/O error, dev fd0, sector 0
>eth2: no IPv6 routers present
>Adding 204796k swap on /swap.  Priority:-1 extents:1 across:204796k 
>XFS (hda3): Mounting Filesystem
>XFS (hda3): Ending clean mount
>Adding 204796k swap on /mnt/hdc1/swapfile.  Priority:-2 extents:755 across:571276k 
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>eth2: no IPv6 routers present
>PM: Syncing filesystems ... done.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>parport_pc 00:09: disabled
>serial 00:08: disabled
>serial 00:08: wake-up capability disabled by ACPI
>pci 0000:00:1e.0: wake-up capability enabled by ACPI
>[drm] nouveau 0000:01:00.0: Disabling display...
>[drm] nouveau 0000:01:00.0: Disabling fbcon...
>[drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:01:00.0: Evicting buffers...
>[drm] nouveau 0000:01:00.0: Idling channels...
>[drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[drm] nouveau 0000:01:00.0: And we're gone!
>PM: suspend of devices complete after 271.661 msecs
>PM: late suspend of devices complete after 0.224 msecs
>ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>PM: noirq suspend of devices complete after 15.972 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>ACPI: Low-level resume complete
>PM: Restoring platform NVS memory
>ACPI: Waking up from system sleep state S3
>uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>PM: noirq resume of devices complete after 0.905 msecs
>PM: early resume of devices complete after 0.071 msecs
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>usb usb2: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>PIIX_IDE 0000:00:1f.1: setting latency timer to 64
>snd_intel8x0 0000:00:1f.5: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: We're back, enabling device...
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: POSTing device...
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEEC2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF265
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF738
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF8C0
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF984
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[drm] nouveau 0000:01:00.0: Reinitialising engines...
>[drm] nouveau 0000:01:00.0: Restoring mode...
>[drm] nouveau 0000:01:00.0: 0xD434: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: 0xD484: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>pci 0000:00:1e.0: wake-up capability disabled by ACPI
>serial 00:08: activated
>parport_pc 00:09: activated
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>hda: UDMA/100 mode selected
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/100 mode selected
>usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>
>floppy driver state
>-------------------
>now=4294944416 last interrupt=4294900854 diff=43562 last called handler=seek_interrupt
>timeout_message=lock fdc
>last output bytes:
>13 90 4294900695
> 0 90 4294900695
>1a 90 4294900695
> 0 90 4294900695
> 3 80 4294900695
>c1 90 4294900695
>10 90 4294900695
> 7 80 4294900695
> 0 90 4294900695
> 8 81 4294900695
> f 80 4294900695
> 0 90 4294900695
> 1 90 4294900695
> 8 81 4294900696
> 4 80 4294900853
> 0 90 4294900853
> f 80 4294900853
> 0 90 4294900853
> 0 90 4294900853
> 8 81 4294900854
>last result at 4294900854
>last redo_fd_request at 4294900859
>20 00                                             .
>status=0
>fdc_busy=1
>do_floppy=reset_interrupt
>cont=e0d57528
>current_req=  (null)
>command_status=-1
>
>floppy0: floppy timeout called
>PM: resume of devices complete after 10986.510 msecs
>Restarting tasks ... done.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>PM: Syncing filesystems ... done.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>parport_pc 00:09: disabled
>serial 00:08: disabled
>serial 00:08: wake-up capability disabled by ACPI
>pci 0000:00:1e.0: wake-up capability enabled by ACPI
>[drm] nouveau 0000:01:00.0: Disabling display...
>[drm] nouveau 0000:01:00.0: Disabling fbcon...
>[drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:01:00.0: Evicting buffers...
>[drm] nouveau 0000:01:00.0: Idling channels...
>[drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[drm] nouveau 0000:01:00.0: And we're gone!
>PM: suspend of devices complete after 203.652 msecs
>PM: late suspend of devices complete after 0.229 msecs
>ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>PM: noirq suspend of devices complete after 15.969 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>ACPI: Low-level resume complete
>PM: Restoring platform NVS memory
>ACPI: Waking up from system sleep state S3
>uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>PM: noirq resume of devices complete after 0.906 msecs
>PM: early resume of devices complete after 0.070 msecs
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>usb usb2: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>PIIX_IDE 0000:00:1f.1: setting latency timer to 64
>snd_intel8x0 0000:00:1f.5: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: We're back, enabling device...
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: POSTing device...
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEEC2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF265
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF738
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF8C0
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF984
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[drm] nouveau 0000:01:00.0: Reinitialising engines...
>[drm] nouveau 0000:01:00.0: Restoring mode...
>[drm] nouveau 0000:01:00.0: 0xD434: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: 0xD484: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>pci 0000:00:1e.0: wake-up capability disabled by ACPI
>serial 00:08: activated
>parport_pc 00:09: activated
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>hda: UDMA/100 mode selected
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>hdc: UDMA/100 mode selected
>usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>
>floppy driver state
>-------------------
>now=4294959976 last interrupt=4294900854 diff=59122 last called handler=seek_interrupt
>timeout_message=lock fdc
>last output bytes:
>13 90 4294900695
> 0 90 4294900695
>1a 90 4294900695
> 0 90 4294900695
> 3 80 4294900695
>c1 90 4294900695
>10 90 4294900695
> 7 80 4294900695
> 0 90 4294900695
> 8 81 4294900695
> f 80 4294900695
> 0 90 4294900695
> 1 90 4294900695
> 8 81 4294900696
> 4 80 4294900853
> 0 90 4294900853
> f 80 4294900853
> 0 90 4294900853
> 0 90 4294900853
> 8 81 4294900854
>last result at 4294900854
>last redo_fd_request at 4294944421
>20 00                                             .
>status=0
>fdc_busy=1
>do_floppy=reset_interrupt
>cont=e0d57528
>current_req=  (null)
>command_status=-1
>
>floppy0: floppy timeout called
>PM: resume of devices complete after 11014.411 msecs
>Restarting tasks ... done.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>PM: Syncing filesystems ... done.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>parport_pc 00:09: disabled
>serial 00:08: disabled
>serial 00:08: wake-up capability disabled by ACPI
>pci 0000:00:1e.0: wake-up capability enabled by ACPI
>[drm] nouveau 0000:01:00.0: Disabling display...
>[drm] nouveau 0000:01:00.0: Disabling fbcon...
>[drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:01:00.0: Evicting buffers...
>[drm] nouveau 0000:01:00.0: Idling channels...
>[drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[drm] nouveau 0000:01:00.0: And we're gone!
>PM: suspend of devices complete after 219.656 msecs
>PM: late suspend of devices complete after 0.234 msecs
>ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>PM: noirq suspend of devices complete after 15.962 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>ACPI: Low-level resume complete
>PM: Restoring platform NVS memory
>ACPI: Waking up from system sleep state S3
>uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>PM: noirq resume of devices complete after 0.910 msecs
>PM: early resume of devices complete after 0.071 msecs
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>usb usb2: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>PIIX_IDE 0000:00:1f.1: setting latency timer to 64
>snd_intel8x0 0000:00:1f.5: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: We're back, enabling device...
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: POSTing device...
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEEC2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF265
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF738
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF8C0
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF984
>agpgart-intel 0000:00:00.0: AGP 2.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[drm] nouveau 0000:01:00.0: Reinitialising engines...
>[drm] nouveau 0000:01:00.0: Restoring mode...
>[drm] nouveau 0000:01:00.0: 0xD434: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: 0xD484: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>pci 0000:00:1e.0: wake-up capability disabled by ACPI
>serial 00:08: activated
>parport_pc 00:09: activated
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>hda: UDMA/100 mode selected
>e100 0000:02:08.0: eth2: NIC Link is Up 100 Mbps Full Duplex
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/100 mode selected
>usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>
>floppy driver state
>-------------------
>now=29056 last interrupt=4294900854 diff=95498 last called handler=seek_interrupt
>timeout_message=lock fdc
>last output bytes:
>13 90 4294900695
> 0 90 4294900695
>1a 90 4294900695
> 0 90 4294900695
> 3 80 4294900695
>c1 90 4294900695
>10 90 4294900695
> 7 80 4294900695
> 0 90 4294900695
> 8 81 4294900695
> f 80 4294900695
> 0 90 4294900695
> 1 90 4294900695
> 8 81 4294900696
> 4 80 4294900853
> 0 90 4294900853
> f 80 4294900853
> 0 90 4294900853
> 0 90 4294900853
> 8 81 4294900854
>last result at 4294900854
>last redo_fd_request at 4294959983
>20 00                                             .
>status=0
>fdc_busy=1
>do_floppy=reset_interrupt
>cont=e0d57528
>current_req=  (null)
>command_status=-1
>
>floppy0: floppy timeout called
>PM: resume of devices complete after 10698.460 msecs
>Restarting tasks ... done.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 3)
>[drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 0 using output C
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243
>[drm] nouveau 0000:01:00.0: PGRAPH - ERROR nsource: DATA_ERROR nstatus: BAD_ARGUMENT
>[drm] nouveau 0000:01:00.0: PGRAPH - ch 3 (0x0007b000) subc 7 class 0x4097 mthd 0x0208 data 0x04040243

Actions: View

Attachments on bug 49727: 61353 | 61354 | 61355 | 61356 | 85162

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.