Attachment 6159 Details for Bug 7445 – dmesg output with agp+drm as module

dmesg output with agp+drm as module

dmesg-64-debug (text/plain), 15.39 KB, created by Frank Kingswood on 2006-07-07 13:45:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Kingswood

Created: 2006-07-07 13:45:34 UTC

Size: 15.39 KB

patch

obsolete

>klogd 1.4.1#17, log source = /proc/kmsg started.
>Inspecting /boot/System.map-2.6.17.1
>Loaded 25804 symbols from /boot/System.map-2.6.17.1.
>Symbols match kernel version 2.6.17.
>No module symbols loaded - kernel modules not enabled. 
>>  DMA zone: 2582 pages, LIFO batch:0
>  DMA32 zone: 254505 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists
>Kernel command line: root=/dev/sdb1
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2216.040 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 1026364k/1048512k available (2762k kernel code, 21444k reserved, 1136k data, 172k init)
>Calibrating delay using timer specific routine.. 4436.05 BogoMIPS (lpj=8872101)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00
>Using local APIC timer interrupts.
>result 12591159
>Detected 12.591 MHz APIC timer.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Quirk-MSI-K8T Soundcard On
>PCI: Unexpected Value in PCI-Register: no Change!
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: f4000000-f5ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>IA32 emulation $Id: dmesg-64-debug,v 1.1 2006/07/07 20:43:13 frank Exp $
>fuse init (API version 7.6)
>io scheduler noop registered
>io scheduler deadline registered (default)
>lp: driver loaded but no devices found
>Serial: 8250/16550 driver $Revision: 1.1 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>isa bounce pool size: 16 pages
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>loop: loaded (max 8 devices)
>r8169 Gigabit Ethernet driver 2.2LK loaded
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xffffc20000002000, 00:0f:ea:7e:42:e1, IRQ 16
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
>PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 1
>VP_IDE: chipset revision 6
>VP_IDE: not 100%% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940 SCSI adapter>
>        aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
>
>  Vendor: iomega    Model: jaz 1GB           Rev: H.71
>  Type:   Direct-Access                      ANSI SCSI revision: 02
> target0:0:6: Beginning Domain Validation
> target0:0:6: FAST-10 SCSI 8.1 MB/s ST (124 ns, offset 15)
> target0:0:6: Domain Validation skipping write tests
> target0:0:6: Ending Domain Validation
>libata version 1.20 loaded.
>sata_sil 0000:00:0e.0: version 0.9
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 19
>sata_sil 0000:00:0e.0: Applying R_ERR on DMA activate FIS errata fix
>ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0xFFFFC20000006000 irq 19
>ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0xFFFFC20000006008 irq 19
>ata1: SATA link up 1.5 Gbps (SStatus 113)
>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:20ff
>ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48
>ata1: dev 0 configured for UDMA/100
>scsi1 : sata_sil
>ata2: SATA link down (SStatus 0)
>scsi2 : sata_sil
>  Vendor: ATA       Model: SAMSUNG HD080HJ   Rev: WT10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>sata_via 0000:00:0f.0: version 1.1
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
>sata_via 0000:00:0f.0: routed to hard irq line 10
>ata3: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC800 irq 17
>ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xC808 irq 17
>ata3: SATA link down (SStatus 0)
>scsi3 : sata_via
>ata4: SATA link down (SStatus 0)
>scsi4 : sata_via
>sd 0:0:6:0: Attached scsi removable disk sda
>SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 > sdb4
>sd 1:0:0:0: Attached scsi disk sdb
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 16 (level, low) -> IRQ 20
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[f7008000-f70087ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
>video1394: Installed video1394 module
>ieee1394: raw1394: /dev/raw1394 device initialized
>ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
>ieee1394: sbp2: Try serialize_io=0 for better performance
>ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7005000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 5
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 5
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usb 1-8: new high speed USB device using ehci_hcd and address 4
>usb 1-8: configuration #1 chosen from 1 choice
>hub 1-8:1.0: USB hub found
>hub 1-8:1.0: 4 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000fea56008bece0]
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>usb 1-8.4: new high speed USB device using ehci_hcd and address 5
>usb 1-8.4: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>i2c /dev entries driver
>Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
>ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>ALSA device list:
>  #0: VIA 8237 with ALC850 at 0xe400, irq 22
>ip_conntrack version 2.4 (4095 buckets, 32760 max) - 240 bytes per conntrack
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP bic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>ACPI wakeup devices: 
>PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 ECP1 
>ACPI: (supports S0 S1 S4 S5)
>ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb1: using ordered data mode
>ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb1: checking transaction log (sdb1)
>ReiserFS: sdb1: Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly.
>Freeing unused kernel memory: 172k freed
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xf0000000
>Device not ready. Make sure there is a disc in the drive.
>Device not ready. Make sure there is a disc in the drive.
>Adding 3012176k swap on /dev/sdb2.  Priority:-1 extents:1 across:3012176k
>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 5:0:0:0: Attached scsi removable disk sdc
>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 5:0:0:1: Attached scsi removable disk sdd
>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 5:0:0:2: Attached scsi removable disk sde
>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 5:0:0:3: Attached scsi removable disk sdf
>usb-storage: device scan complete
>ReiserFS: sdb5: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb5: using ordered data mode
>ReiserFS: sdb5: journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb5: checking transaction log (sdb5)
>ReiserFS: sdb5: Using r5 hash to sort names
>ReiserFS: sdb6: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb6: using ordered data mode
>ReiserFS: sdb6: journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb6: checking transaction log (sdb6)
>ReiserFS: sdb6: Using r5 hash to sort names
>ReiserFS: sdb7: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb7: using ordered data mode
>ReiserFS: sdb7: journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb7: checking transaction log (sdb7)
>ReiserFS: sdb7: Using r5 hash to sort names
>ReiserFS: sdb8: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb8: using ordered data mode
>ReiserFS: sdb8: journal params: device sdb8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb8: checking transaction log (sdb8)
>ReiserFS: sdb8: Using r5 hash to sort names
>r8169: eth0: link up
>Device not ready. Make sure there is a disc in the drive.
>

Actions: View

Attachments on bug 7445: 6146 | 6147 | 6148 | 6149 | 6150 | 6159 | 6160 | 6161

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.