Attachment 6305 Details for Bug 7595 – dmesg kernel log

dmesg kernel log

DMESG (text/plain), 18.82 KB, created by Chris Rankin on 2006-07-22 14:16:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Rankin

Created: 2006-07-22 14:16:24 UTC

Size: 18.82 KB

patch

obsolete

>Linux version 2.6.17.6 (chris@volcano.underworld) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP PREEMPT Sat Jul 15 22:59:54 BST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff75000 (usable)
> BIOS-e820: 000000003ff75000 - 000000003ff77000 (ACPI NVS)
> BIOS-e820: 000000003ff77000 - 000000003ff98000 (ACPI data)
> BIOS-e820: 000000003ff98000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>On node 0 totalpages: 262005
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32629 pages, LIFO batch:7
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x000febc0
>ACPI: RSDT (v001 DELL    WS 650  0x00000008 ASL  0x00000061) @ 0x000fd4d9
>ACPI: FADT (v001 DELL    WS 650  0x00000008 ASL  0x00000061) @ 0x000fd511
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffefa6f
>ACPI: MADT (v001 DELL    WS 650  0x00000008 ASL  0x00000061) @ 0x000fd585
>ACPI: BOOT (v001 DELL    WS 650  0x00000008 ASL  0x00000061) @ 0x000fd609
>ACPI: ASF! (v016 DELL    WS 650  0x00000008 ASL  0x00000061) @ 0x000fd631
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>Processor #6 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>Processor #7 15:2 APIC version 20
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
>IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ nmi_watchdog=1 elevator=cfq console=ttyS0,115200n8 console=tty0 pmtmr_good
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec80000)
>mapped IOAPIC to ffffa000 (fec80800)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c030c000 soft=c0304000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2658.329 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1034884k/1048020k available (1339k kernel code, 12404k reserved, 522k data, 164k init, 130516k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5320.90 BogoMIPS (lpj=10641817)
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 12k freed
>CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Booting processor 1/1 eip 2000
>CPU 1 irqstacks, hard=c030d000 soft=c0305000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5316.53 BogoMIPS (lpj=10633067)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Booting processor 2/6 eip 2000
>CPU 2 irqstacks, hard=c030e000 soft=c0306000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5316.74 BogoMIPS (lpj=10633499)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Booting processor 3/7 eip 2000
>CPU 3 irqstacks, hard=c030f000 soft=c0307000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5316.64 BogoMIPS (lpj=10633285)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Total of 4 processors activated (21270.83 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>migration_cost=0,4000
>checking if image is initramfs... it is
>Freeing initrd memory: 896k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbdda, last bus=5
>Setting up standard PCI resources
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:0c: ioport range 0x800-0x85f could not be reserved
>pnp: 00:0c: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:0c: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: ff800000-ff9fffff
>  PREFETCH window: e8000000-f7ffffff
>PCI: Bridge: 0000:02:1d.0
>  IO window: d000-dfff
>  MEM window: ff600000-ff7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:1f.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: d000-dfff
>  MEM window: ff400000-ff7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: ff200000-ff3fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag value 0x87 read from CMOS RAM was invalid
>Simple Boot Flag at 0x7a set to 0x1
>Machine check exception polling timer started.
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler cfq registered (default)
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
>ICH4: chipset revision 1
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: IC35L090AVV207-0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
>hdd: SONY CD-RW CRX216E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 156250000 sectors (80000 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
>TCP bic registered
>NET: Registered protocol family 1
>Testing NMI watchdog ... <6>input: AT Translated Set 2 keyboard as /class/input/input0
>OK.
>Starting balanced_irq
>Using IPI Shortcut mode
>Freeing unused kernel memory: 164k freed
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel E7505 Chipset.
>agpgart: AGP aperture is 128M @ 0xe0000000
>hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>EDAC MC: Ver: 2.0.0 Jul 15 2006
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
>Copyright (c) 1999-2005 Intel Corporation.
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa20800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[ff2ff800-ff2fffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:05:0d.2[B] -> GSI 22 (level, low) -> IRQ 21
>ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[ff2ff000-ff2ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:03:0e.0[A] -> GSI 24 (level, low) -> IRQ 22
>e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0d:56:0d:e7:3f
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:05:0d.0[A] -> GSI 21 (level, low) -> IRQ 23
>Installing spdif_bug patch: Audigy 2 [Unknown]
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 24
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>usb 2-1: configuration #1 chosen from 1 choice
>intel8x0_measure_ac97_clock: measured 57987 usecs
>intel8x0: clocking to 48000
>Linux video capture interface: v1.00
>pwc: Philips webcam module version 10.0.12-rc1 loaded.
>pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
>usbcore: registered new driver snd-usb-audio
>pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
>pwc: Registered as /dev/video0.
>usbcore: registered new driver Philips webcam
>ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00023c00a1037111]
>eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
>eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1)
>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0050c500001076df]
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[86ffffffffffff00]
>ieee1394: raw1394: /dev/raw1394 device initialized
>video1394: Installed video1394 module
>Non-volatile memory driver v1.2
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>EXT3 FS on hda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2040212k swap on /dev/hda7.  Priority:-1 extents:1 across:2040212k
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU3 updated from revision 0x0 to 0x2d, date = 08112004 
>microcode: CPU1 updated from revision 0x18 to 0x2d, date = 08112004 
>microcode: CPU2 updated from revision 0x0 to 0x2d, date = 08112004 
>microcode: CPU0 updated from revision 0x18 to 0x2d, date = 08112004 
>NET: Registered protocol family 17
>e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>input: PC Speaker as /class/input/input2
>usbcore: deregistering driver Philips webcam
>pwc: Philips webcam module removed.
>pwc: Philips webcam module version 10.0.12-rc1 loaded.
>pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
>pwc: Registered as /dev/video0.
>usbcore: registered new driver Philips webcam
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>[drm] Initialized radeon 1.25.0 20060524 on minor 0: 
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on old memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 7595: 6301 | 6302 | 6305 | 6311 | 6312 | 6315 | 6405 | 6682

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.