Attachment 63914 Details for Bug 51805 – dmesg

dmesg

dmesg (text/plain), 47.71 KB, created by denisgolovan on 2012-07-06 15:15:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: denisgolovan

Created: 2012-07-06 15:15:26 UTC

Size: 47.71 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 3.4.4-00005-g8e4bbcd (root@den-desktop) (gcc version 4.6.3 (Gentoo 4.6.3 p1.3, pie-0.5.1) ) #3 SMP PREEMPT Mon Jul 2 20:06:57 EEST 2012
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dffb1d00 (usable)
> BIOS-e820: 00000000dffb1d00 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
> BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Hewlett-Packard HP Compaq dc7700p Convertible Minitower/0A58h, BIOS 786E1 v02.10 04/13/2007
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x11c000 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-E3FFF write-protect
>  E4000-EFFFF write-back
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FE0000000 write-back
>  3 base 100000000 mask FF0000000 write-back
>  4 base 110000000 mask FF8000000 write-back
>  5 base 118000000 mask FFC000000 write-back
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
>found SMP MP-table at [c00f9bf0] f9bf0
>initial memory mapped : 0 - 01e00000
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: 0000000000000000-0000000037bfe000
> 0000000000 - 0000200000 page 4k
> 0000200000 - 0037a00000 page 2M
> 0037a00000 - 0037bfe000 page 4k
>kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000
>RAMDISK: 37c74000 - 37ff0000
>Allocated new RAMDISK: 37882000 - 37bfd913
>Move RAMDISK from 0000000037c74000 - 0000000037fef912 to 37882000 - 37bfd912
>ACPI: RSDP 000e7610 00014 (v00 COMPAQ)
>ACPI: RSDT dffc3d40 0003C (v01 HPQOEM SLIC-BPC 20070413      00000000)
>ACPI: FACP dffc3de8 00074 (v01 COMPAQ BROADH2O 00000001      00000000)
>ACPI: DSDT dffc4143 093BB (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
>ACPI: FACS dffc3d00 00040
>ACPI: APIC dffc3e5c 00068 (v01 COMPAQ BROADH2O 00000001      00000000)
>ACPI: ASF! dffc3ec4 00063 (v32 COMPAQ BROADH2O 00000001      00000000)
>ACPI: MCFG dffc3f27 0003C (v01 COMPAQ BROADH2O 00000001      00000000)
>ACPI: TCPA dffc3f63 00032 (v01 COMPAQ BROADH2O 00000001      00000000)
>ACPI: HPET dffc410b 00038 (v01 COMPAQ BROADH2O 00000001      00000000)
>ACPI: Local APIC address 0xfee00000
>3652MB HIGHMEM available.
>891MB LOWMEM available.
>  mapped low ram: 0 - 37bfe000
>  low ram: 0 - 37bfe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x00037bfe
>  HighMem  0x00037bfe -> 0x0011c000
>Movable zone start PFN for each node
>Early memory PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000dffb1
>    0: 0x00100000 -> 0x0011c000
>On node 0 totalpages: 1032000
>free_area_init_node: node 0, pgdat c1853bc0, node_mem_map f5501200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1752 pages used for memmap
>  Normal zone: 222502 pages, LIFO batch:31
>  HighMem zone: 7305 pages used for memmap
>  HighMem zone: 796458 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
>PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 11 pages/cpu @f54d9000 s23808 r0 d21248 u45056
>pcpu-alloc: s23808 r0 d21248 u45056 alloc=11*4096
>pcpu-alloc: [0] 0 [0] 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1022911
>Kernel command line: root=/dev/ram0 init=/linuxrc         real_root=/dev/sda3         real_rootflags=data=ordered clocksource=hpet psmouse.rate=250 usbhid.mousepoll=1         radeon.modeset=1 
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>Initializing HighMem for node 0 (00037bfe:0011c000)
>Memory: 4077600k/4653056k available (6186k kernel code, 50400k reserved, 2375k data, 416k init, 3215052k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
>    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
>    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
>      .init : 0xc185d000 - 0xc18c5000   ( 416 kB)
>      .data : 0xc160a832 - 0xc185c740   (2375 kB)
>      .text : 0xc1000000 - 0xc160a832   (6186 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Preemptible hierarchical RCU implementation.
>NR_IRQS:2304 nr_irqs:744 16
>CPU 0 irqstacks, hard=f5008000 soft=f500a000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2393.984 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.96 BogoMIPS (lpj=2393984)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>Initializing cgroup subsys devices
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20120320
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>CPU 1 irqstacks, hard=f507e000 soft=f5080000
>Booting Node   0, Processors  #1
>Initializing CPU#1
>Brought up 2 CPUs
>Total of 2 processors activated (9575.93 BogoMIPS).
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
>PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT dffce68a 00320 (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 00320 (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5035420), AE_ALREADY_EXISTS (20120320/psparse-536)
>ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
>ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x1000-0x2fff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x3000-0x6fff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x7000-0xafff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0xb000-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf3ffffff] (ignored)
>PCI: root bus 00: using default resources
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
>pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
>pci 0000:00:01.0: [8086:2991] type 01 class 0x060400
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: [8086:2994] type 00 class 0x078000
>pci 0000:00:03.0: reg 10: [mem 0xf0526900-0xf052690f 64bit]
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.2: [8086:2996] type 00 class 0x010185
>pci 0000:00:03.2: reg 10: [io  0x3210-0x3217]
>pci 0000:00:03.2: reg 14: [io  0x3238-0x323b]
>pci 0000:00:03.2: reg 18: [io  0x3218-0x321f]
>pci 0000:00:03.2: reg 1c: [io  0x323c-0x323f]
>pci 0000:00:03.2: reg 20: [io  0x31e0-0x31ef]
>pci 0000:00:03.3: [8086:2997] type 00 class 0x070002
>pci 0000:00:03.3: reg 10: [io  0x3220-0x3227]
>pci 0000:00:03.3: reg 14: [mem 0xf0524000-0xf0524fff]
>pci 0000:00:19.0: [8086:104a] type 00 class 0x020000
>pci 0000:00:19.0: reg 10: [mem 0xf0500000-0xf051ffff]
>pci 0000:00:19.0: reg 14: [mem 0xf0525000-0xf0525fff]
>pci 0000:00:19.0: reg 18: [io  0x3100-0x311f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>pci 0000:00:1a.0: reg 20: [io  0x3120-0x313f]
>pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
>pci 0000:00:1a.1: reg 20: [io  0x3140-0x315f]
>pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>pci 0000:00:1a.7: reg 10: [mem 0xf0526000-0xf05263ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>pci 0000:00:1d.0: reg 20: [io  0x3160-0x317f]
>pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>pci 0000:00:1d.1: reg 20: [io  0x3180-0x319f]
>pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>pci 0000:00:1d.7: reg 10: [mem 0xf0526400-0xf05267ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>pci 0000:00:1f.0: [8086:2814] type 00 class 0x060100
>pci 0000:00:1f.0: quirk: [io  0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0xfa00-0xfa3f] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
>pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a
>pci 0000:00:1f.2: reg 10: [io  0x3228-0x322f]
>pci 0000:00:1f.2: reg 14: [io  0x3240-0x3243]
>pci 0000:00:1f.2: reg 18: [io  0x3230-0x3237]
>pci 0000:00:1f.2: reg 1c: [io  0x3244-0x3247]
>pci 0000:00:1f.2: reg 20: [io  0x31f0-0x31ff]
>pci 0000:00:1f.2: reg 24: [io  0x3200-0x320f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:01:00.0: [1002:6899] type 00 class 0x030000
>pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xf0400000-0xf041ffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0x2100-0x21ff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300
>pci 0000:01:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xf0200000-0xf04fffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 20-20]
>pci 0000:07:04.0: [13f6:8788] type 00 class 0x040100
>pci 0000:07:04.0: reg 10: [io  0x1100-0x11ff]
>pci 0000:07:04.0: supports D1 D2
>pci 0000:07:09.0: [1102:0002] type 00 class 0x040100
>pci 0000:07:09.0: reg 10: [io  0x1200-0x121f]
>pci 0000:07:09.1: [1102:7002] type 00 class 0x098000
>pci 0000:07:09.1: reg 10: [io  0x1220-0x1227]
>pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5035420), AE_ALREADY_EXISTS (20120320/psparse-536)
>ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
> pci0000:00: Requesting ACPI _OSC control (0x15)
>ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5035420), AE_ALREADY_EXISTS (20120320/psparse-536)
>ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120320/nspredef-359)
> pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x15
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Linux video capture interface: v2.00
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 00000000dffb1d00 - 00000000dfffffff 
>Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>FS-Cache: Loaded
>CacheFiles: Loaded
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [mem 0xf8000000-0xfebfffff window]
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x1000-0x2fff window]
>pnp 00:00: [io  0x3000-0x6fff window]
>pnp 00:00: [io  0x7000-0xafff window]
>pnp 00:00: [io  0xb000-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [io  0x00f0-0x00ff]
>pnp 00:01: [irq 13]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0080-0x008f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: [dma 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [irq 12]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
>pnp 00:06: [io  0x0060]
>pnp 00:06: [io  0x0064]
>pnp 00:06: [irq 1]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (disabled)
>pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (disabled)
>pnp 00:0a: [mem 0xfec00000-0xfec00fff]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
>pnp 00:0b: [mem 0xfed00000-0xfed003ff]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0c: [io  0x0010-0x001f]
>pnp 00:0c: [io  0x0050-0x0053]
>pnp 00:0c: [io  0x0072-0x0077]
>pnp 00:0c: [io  0x0090-0x009f]
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [io  0x0400-0x041f]
>pnp 00:0d: [io  0x0420-0x043f]
>pnp 00:0d: [io  0x0440-0x045f]
>pnp 00:0d: [io  0x0460-0x047f]
>pnp 00:0d: [io  0x0480-0x048f]
>pnp 00:0d: [io  0xf800-0xf81f]
>pnp 00:0d: [io  0xf820-0xf83f]
>pnp 00:0d: [io  0xf840-0xf85f]
>pnp 00:0d: [io  0xf860-0xf87f]
>pnp 00:0d: [io  0xfa00-0xfa3f]
>pnp 00:0d: [io  0xfc00-0xfc7f]
>pnp 00:0d: [io  0xfc80-0xfcff]
>pnp 00:0d: [io  0xfe00-0xfe7f]
>pnp 00:0d: [io  0xfe80-0xfeff]
>pnp 00:0d: disabling [io  0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 7 [io  0xf800-0xf87f]
>pnp 00:0d: disabling [io  0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 7 [io  0xf800-0xf87f]
>pnp 00:0d: disabling [io  0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 7 [io  0xf800-0xf87f]
>pnp 00:0d: disabling [io  0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 7 [io  0xf800-0xf87f]
>system 00:0d: [io  0x0400-0x041f] has been reserved
>system 00:0d: [io  0x0420-0x043f] has been reserved
>system 00:0d: [io  0x0440-0x045f] has been reserved
>system 00:0d: [io  0x0460-0x047f] has been reserved
>system 00:0d: [io  0x0480-0x048f] has been reserved
>system 00:0d: [io  0xfa00-0xfa3f] has been reserved
>system 00:0d: [io  0xfc00-0xfc7f] has been reserved
>system 00:0d: [io  0xfc80-0xfcff] has been reserved
>system 00:0d: [io  0xfe00-0xfe7f] has been reserved
>system 00:0d: [io  0xfe80-0xfeff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [io  0x004e-0x004f]
>pnp 00:0e: [io  0x04d0-0x04d1]
>pnp 00:0e: [io  0x0cb0-0x0cbf]
>system 00:0e: [io  0x04d0-0x04d1] has been reserved
>system 00:0e: [io  0x0cb0-0x0cbf] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0f: [mem 0x00000000-0x0009ffff]
>pnp 00:0f: [mem 0x00100000-0xdfffffff]
>pnp 00:0f: [mem 0x000e4000-0x000fffff]
>pnp 00:0f: [mem 0xfec01000-0xfecfffff]
>pnp 00:0f: [mem 0xfed00400-0xfed3ffff]
>pnp 00:0f: [mem 0xfed40000-0xffffffff]
>pnp 00:0f: [mem 0xf4000000-0xf7ffffff]
>pnp 00:0f: [mem 0x000d1200-0x000e3fff]
>system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
>system 00:0f: [mem 0x000e4000-0x000fffff] could not be reserved
>system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved
>system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved
>system 00:0f: [mem 0xfed40000-0xffffffff] could not be reserved
>system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved
>system 00:0f: [mem 0x000d1200-0x000e3fff] has been reserved
>system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 20-20] add_size 1000
>pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20-20] add_size 200000
>pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20-20] add_size 200000
>pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0600000-0xf07fffff]
>pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
>pci 0000:00:1c.0: BAR 7: assigned [io  0x4000-0x4fff]
>pci 0000:01:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
>pci 0000:01:00.1: BAR 0: assigned [mem 0xf0200000-0xf0203fff 64bit]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0xf0200000-0xf04fffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 20-20]
>pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf07fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 07-07]
>pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf04fffff]
>pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
>pci_bus 0000:20: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:20: resource 1 [mem 0xf0600000-0xf07fffff]
>pci_bus 0000:20: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
>pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:07: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP: reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1a.0: Performing full reset
>pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1a.1: Performing full reset
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.1: Performing full reset
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 3568k freed
>microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
>microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>NFS: Registering the id_resolver key type
>fuse init (API version 7.18)
>msgmni has been set to 1691
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>io scheduler bfq registered
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PBTN]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial 00:08: [irq 4]
>serial 00:08: [io  0x03f8-0x03ff]
>serial 00:08: activated
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>0000:00:03.3: ttyS1 at I/O 0x3220 (irq = 17) is a 16550A
>Real Time Clock Driver v1.12b
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon kernel modesetting enabled.
>[drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899 0x1458:0x21E4).
>[drm] register mmio base: 0xF0400000
>[drm] register mmio size: 131072
>ATOM BIOS: GV
>radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
>[drm] Detected VRAM RAM=1024M, BAR=256M
>[drm] RAM width 256bits DDR
>[TTM] Zone  kernel: Available graphics memory: 433058 kiB
>[TTM] Zone highmem: Available graphics memory: 2040584 kiB
>[TTM] Initializing pool allocator
>[drm] radeon: 1024M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>radeon 0000:01:00.0: irq 42 for MSI/MSI-X
>radeon 0000:01:00.0: radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: ib pool ready.
>[drm] Loading CYPRESS Microcode
>[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffc01c00
>[drm] ring test on 0 succeeded in 0 usecs
>[drm] ib test on ring 0 succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DisplayPort
>[drm]   HPD4
>[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY2
>[drm] Connector 1:
>[drm]   HDMI-A
>[drm]   HPD5
>[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[drm]   Encoders:
>[drm]     DFP3: INTERNAL_UNIPHY1
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 3:
>[drm]   DVI-I
>[drm]   HPD6
>[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
>[drm]   Encoders:
>[drm]     DFP4: INTERNAL_UNIPHY
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Internal thermal controller with fan control
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xE0142000
>[drm] vram apper at 0xE0000000
>[drm] size 9437184
>[drm] fb depth is 24
>[drm]    pitch is 8192
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 256x72
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
>Refined TSC clocksource calibration: 2393.999 MHz.
>floppy0: no floppy controllers found
>brd: module loaded
>loop: module loaded
>3ware Storage Controller device driver for Linux v1.26.02.003.
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x31f0 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x31f8 irq 15
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>PPP generic driver version 2.4.2
>Fusion MPT base driver 3.04.20
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.20
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 68 qtd 96 itd 160 sitd 96
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
>ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0526000
>ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.4.4-00005-g8e4bbcd ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0526400
>ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.4.4-00005-g8e4bbcd ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: detected 2 ports
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.0: Performing full reset
>uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00003120
>usb usb3: default language 0x0409
>usb usb3: udev 1, busnum 3, minor = 256
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.4.4-00005-g8e4bbcd uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: detected 2 ports
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.1: Performing full reset
>uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003140
>usb usb4: default language 0x0409
>usb usb4: udev 1, busnum 4, minor = 384
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 3.4.4-00005-g8e4bbcd uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003160
>usb usb5: default language 0x0409
>usb usb5: udev 1, busnum 5, minor = 512
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 3.4.4-00005-g8e4bbcd uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00003180
>usb usb6: default language 0x0409
>usb usb6: udev 1, busnum 6, minor = 640
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 3.4.4-00005-g8e4bbcd uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: power on to power good time: 2ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>i2c /dev entries driver
>lirc_dev: IR Remote Control driver registered, major 252 
>IR NEC protocol handler initialized
>IR RC5(x) protocol handler initialized
>IR RC6 protocol handler initialized
>IR JVC protocol handler initialized
>IR Sony protocol handler initialized
>IR LIRC bridge handler initialized
>uvcvideo: Unable to create debugfs directory
>ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (1.1.1)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.3.0 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>cpuidle: using governor ladder
>ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001403 0  ACK POWER sig=k CSC CONNECT
>hub 2-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 2: status 0501 change 0001
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>xt_time: kernel timezone is -0000
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP: cubic registered
>NET: Registered protocol family 17
>lib80211: common routines for IEEE802.11 drivers
>uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00
>lib80211_crypt: registered algorithm 'NULL'
>lib80211_crypt: registered algorithm 'WEP'
>lib80211_crypt: registered algorithm 'CCMP'
>lib80211_crypt: registered algorithm 'TKIP'
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
>uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1a.7: port 1 high speed
>ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-1: new high-speed USB device number 2 using ehci_hcd
>ehci_hcd 0000:00:1a.7: port 1 high speed
>ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-1: USB quirks for this device: 2
>ata2.00: SATA link down (SStatus 0 SControl 300)
>ata2.01: SATA link down (SStatus 0 SControl 300)
>usb 1-1: skipped 1 descriptor after configuration
>usb 1-1: skipped 8 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 43 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 4 descriptors after interface
>usb 1-1: skipped 2 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 2 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 2 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 2 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: default language 0x0409
>usb 1-1: udev 2, busnum 1, minor = 1
>usb 1-1: New USB device found, idVendor=046d, idProduct=0825
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-1: SerialNumber: 49409DC0
>usb 1-1: usb_probe_device
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
>uvcvideo 1-1:1.0: usb_probe_interface
>uvcvideo 1-1:1.0: usb_probe_interface - got id
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
>input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input2
>usb 1-1: adding 1-1:1.1 (config #1, interface 1)
>usb 1-1: adding 1-1:1.2 (config #1, interface 2)
>usb 1-1: adding 1-1:1.3 (config #1, interface 3)
>drivers/usb/core/inode.c: creating file '002'
>hub 2-0:1.0: state 7 ports 4 chg 0006 evt 0000
>hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
>ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
>ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
>hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 416k freed
>BFS CPU scheduler v0.424 by Con Kolivas.
>ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003801 0  ACK POWER OWNER sig=j CONNECT
>hub 2-0:1.0: port 2 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0  ACK POWER OWNER sig=se0 CSC
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
>uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
>hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>usb usb6: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>e1000: Copyright (c) 1999-2006 Intel Corporation.
>usb 5-1: new low-speed USB device number 2 using uhci_hcd
>REISERFS (device sda3): found reiserfs format "3.6" with standard journal
>REISERFS (device sda3): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda3): checking transaction log (sda3)
>REISERFS (device sda3): Using r5 hash to sort names
>usb 5-1: skipped 1 descriptor after interface
>usb 5-1: skipped 1 descriptor after interface
>usb 5-1: default language 0x0409
>usb 5-1: udev 2, busnum 5, minor = 513
>usb 5-1: New USB device found, idVendor=045e, idProduct=00db
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: NaturalÂ® Ergonomic Keyboard 4000
>usb 5-1: Manufacturer: Microsoft
>usb usb3: suspend_rh (auto-stop)
>usb 5-1: usb_probe_device
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>usbhid 5-1:1.0: usb_probe_interface
>usbhid 5-1:1.0: usb_probe_interface - got id
>input: Microsoft NaturalÂ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
>microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft NaturalÂ® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input0
>usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>usbhid 5-1:1.1: usb_probe_interface
>usbhid 5-1:1.1: usb_probe_interface - got id
>input: Microsoft NaturalÂ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input4
>uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
>microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft NaturalÂ® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input1
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
>hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>usb 5-2: new full-speed USB device number 3 using uhci_hcd
>usb 5-2: ep0 maxpacket = 8
>usb 5-2: skipped 1 descriptor after interface
>usb 5-2: default language 0x0409
>usb 5-2: udev 3, busnum 5, minor = 514
>usb 5-2: New USB device found, idVendor=1532, idProduct=0029
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: Razer DeathAdder
>usb 5-2: Manufacturer: Razer
>usb 5-2: usb_probe_device
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>usbhid 5-2:1.0: usb_probe_interface
>usbhid 5-2:1.0: usb_probe_interface - got id
>input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5
>generic-usb 0003:1532:0029.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.0-2/input0
>drivers/usb/core/inode.c: creating file '003'
>hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>udevd[3311]: starting version 171
>usb 1-1: link qh16-0001/f484bba0 start 1 [1/0 us]
>usb 1-1: unlink qh16-0001/f484bba0 start 1 [1/0 us]
>e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
>e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:0f:fe:5b:cd:8d
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1002FF-0FF
>reiserfs: enabling write barrier flush mode
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 offMin=0x26d offMax=0xac2
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 4.1.18 (interface 0x00190000).
>REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-0): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 60, max trans age 60
>REISERFS (device dm-0): checking transaction log (dm-0)
>REISERFS (device dm-0): Using r5 hash to sort names
>REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-1): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 60, max trans age 60
>REISERFS (device dm-1): checking transaction log (dm-1)
>REISERFS (device dm-1): Using r5 hash to sort names
>EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: commit=60

Actions: View

Attachments on bug 51805: 63913 | 63914 | 63915 | 63965

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.