Attachment 6756 Details for Bug 8079 – kernel messages

kernel messages

kernel.log (text/plain), 67.31 KB, created by Dark Shadow on 2006-08-30 20:06:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dark Shadow

Created: 2006-08-30 20:06:42 UTC

Size: 67.31 KB

patch

obsolete

>Aug 31 03:50:25 [kernel] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Aug 31 03:50:25 [kernel] Calibrating delay using timer specific routine.. 6837.76 BogoMIPS (lpj=34188847)
>Aug 31 03:50:25 [kernel] Mount-cache hash table entries: 512
>Aug 31 03:50:25 [kernel] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>Aug 31 03:50:25 [kernel] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>Aug 31 03:50:25 [kernel] monitor/mwait feature present.
>Aug 31 03:50:25 [kernel] using mwait in idle threads.
>Aug 31 03:50:25 [kernel] CPU: Trace cache: 12K uops, L1 D cache: 16K
>Aug 31 03:50:25 [kernel] CPU: L2 cache: 1024K
>Aug 31 03:50:25 [kernel] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
>Aug 31 03:50:25 [kernel] Intel machine check architecture supported.
>Aug 31 03:50:25 [kernel] Intel machine check reporting enabled on CPU#0.
>Aug 31 03:50:25 [kernel] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Aug 31 03:50:25 [kernel] CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 04
>Aug 31 03:50:25 [kernel] Checking 'hlt' instruction... OK.
>Aug 31 03:50:25 [kernel] SMP alternatives: switching to UP code
>Aug 31 03:50:25 [kernel] Freeing SMP alternatives: 0k freed
>Aug 31 03:50:25 [kernel] ACPI: setting ELCR to 0200 (from 0ea8)
>Aug 31 03:50:25 [kernel] checking if image is initramfs... it is
>Aug 31 03:50:25 [kernel] Freeing initrd memory: 426k freed
>Aug 31 03:50:25 [kernel] NET: Registered protocol family 16
>Aug 31 03:50:25 [kernel] ACPI: bus type pci registered
>Aug 31 03:50:25 [kernel] PCI: PCI BIOS revision 2.10 entry at 0xfafe0, last bus=2
>Aug 31 03:50:25 [kernel] Setting up standard PCI resources
>Aug 31 03:50:25 [kernel] ACPI: Subsystem revision 20060127
>Aug 31 03:50:25 [kernel] ACPI: Interpreter enabled
>Aug 31 03:50:25 [kernel] ACPI: Using PIC for interrupt routing
>Aug 31 03:50:25 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00)
>Aug 31 03:50:25 [kernel] PCI: Probing PCI hardware (bus 00)
>Aug 31 03:50:25 [kernel] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>Aug 31 03:50:25 [kernel] PCI quirk: region 1080-10bf claimed by ICH4 GPIO
>Aug 31 03:50:25 [kernel] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Aug 31 03:50:25 [kernel] Boot video device is 0000:01:00.0
>Aug 31 03:50:25 [kernel] PCI: Transparent bridge - 0000:00:1e.0
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>Aug 31 03:50:25 [kernel] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Aug 31 03:50:25 [kernel] SCSI subsystem initialized
>Aug 31 03:50:25 [kernel] usbcore: registered new driver usbfs
>Aug 31 03:50:25 [kernel] usbcore: registered new driver hub
>Aug 31 03:50:25 [kernel] PCI: Using ACPI for IRQ routing
>Aug 31 03:50:25 [kernel] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Aug 31 03:50:25 [kernel] PCI: Bridge: 0000:00:01.0
>Aug 31 03:50:25 [kernel]   IO window: 9000-9fff
>Aug 31 03:50:25 [kernel]   MEM window: f0000000-f1ffffff
>Aug 31 03:50:25 [kernel]   PREFETCH window: e0000000-efffffff
>Aug 31 03:50:25 [kernel] PCI: Bridge: 0000:00:1e.0
>Aug 31 03:50:25 [kernel]   IO window: a000-afff
>Aug 31 03:50:25 [kernel]   MEM window: f2000000-f3ffffff
>Aug 31 03:50:25 [kernel]   PREFETCH window: f4000000-f40fffff
>Aug 31 03:50:25 [kernel] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Aug 31 03:50:25 [kernel] NET: Registered protocol family 2
>Aug 31 03:50:25 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>Aug 31 03:50:25 [kernel] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
>Aug 31 03:50:25 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>Aug 31 03:50:25 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
>Aug 31 03:50:25 [kernel] TCP reno registered
>Aug 31 03:50:25 [kernel] Machine check exception polling timer started.
>Aug 31 03:50:25 [kernel] NTFS driver 2.1.27 [Flags: R/O].
>Aug 31 03:50:25 [kernel] fuse init (API version 7.6)
>Aug 31 03:50:25 [kernel] io scheduler noop registered
>Aug 31 03:50:25 [kernel] io scheduler cfq registered (default)
>Aug 31 03:50:25 [kernel] Real Time Clock Driver v1.12ac
>Aug 31 03:50:25 [kernel] vesafb: ATI Technologies Inc., R300, 01.00 (OEM: ATI R300)
>Aug 31 03:50:25 [kernel] vesafb: VBE version: 2.0
>Aug 31 03:50:25 [kernel] vesafb: protected mode interface info at c000:577e
>Aug 31 03:50:25 [kernel] vesafb: pmi: set display start = c00c5812, set palette = c00c585e
>Aug 31 03:50:25 [kernel] vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 
>Aug 31 03:50:25 [kernel] vesafb: no monitor limits have been set
>Aug 31 03:50:25 [kernel] vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2560
>Aug 31 03:50:25 [kernel] vesafb: VBE state buffer size cannot be determined (eax: 0x0)
>Aug 31 03:50:25 [kernel] Console: switching to colour frame buffer device 128x48
>Aug 31 03:50:25 [kernel] fbsplash: console 0 using theme 'AquaMatrix'
>Aug 31 03:50:26 [kernel] fbsplash: switched splash state to 'on' on console 0
>Aug 31 03:50:26 [kernel] vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 131072k
>Aug 31 03:50:26 [kernel] fb0: VESA VGA frame buffer device
>Aug 31 03:50:26 [kernel] ACPI: Power Button (FF) [PWRF]
>Aug 31 03:50:26 [kernel] ACPI: Power Button (CM) [PWRB]
>Aug 31 03:50:26 [kernel] ACPI: Fan [FAN] (on)
>Aug 31 03:50:26 [kernel] ACPI: Thermal Zone [THRM] (22 C)
>Aug 31 03:50:26 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
>Aug 31 03:50:26 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
>Aug 31 03:50:26 [kernel] mice: PS/2 mouse device common for all mice
>Aug 31 03:50:26 [kernel] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Aug 31 03:50:26 [kernel] loop: loaded (max 8 devices)
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>Aug 31 03:50:26 [kernel] PCI: setting IRQ 10 as level-triggered
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>Aug 31 03:50:26 [kernel] skge 1.5 addr 0xf3000000 irq 10 chip Yukon-Lite rev 7
>Aug 31 03:50:26 [kernel] skge eth0: addr 00:0f:ea:33:3d:13
>Aug 31 03:50:26 [kernel] PPP generic driver version 2.4.2
>Aug 31 03:50:26 [kernel] PPP Deflate Compression module registered
>Aug 31 03:50:26 [kernel] PPP BSD Compression module registered
>Aug 31 03:50:26 [kernel] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Aug 31 03:50:26 [kernel] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Aug 31 03:50:26 [kernel] ICH5: IDE controller at PCI slot 0000:00:1f.1
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>Aug 31 03:50:26 [kernel] PCI: setting IRQ 11 as level-triggered
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:50:26 [kernel] ICH5: chipset revision 2
>Aug 31 03:50:26 [kernel] ICH5: not 100% native mode: will probe irqs later
>Aug 31 03:50:26 [kernel]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>Aug 31 03:50:26 [kernel]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
>Aug 31 03:50:26 [kernel] Probing IDE interface ide0...
>Aug 31 03:50:26 [kernel] hda: SAMSUNG SP2514N, ATA DISK drive
>Aug 31 03:50:26 [kernel] hdb: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
>Aug 31 03:50:26 [kernel] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Aug 31 03:50:26 [kernel] Probing IDE interface ide1...
>Aug 31 03:50:26 [kernel] hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
>Aug 31 03:50:26 [kernel] ide1 at 0x170-0x177,0x376 on irq 15
>Aug 31 03:50:26 [kernel] hda: max request size: 512KiB
>Aug 31 03:50:26 [kernel] hda: Host Protected Area detected.
>Aug 31 03:50:26 [kernel] _current capacity is 488395055 sectors (250058 MB)
>Aug 31 03:50:26 [kernel] _native  capacity is 488397168 sectors (250059 MB)
>Aug 31 03:50:26 [kernel] hda: Host Protected Area disabled.
>Aug 31 03:50:26 [kernel] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
>Aug 31 03:50:26 [kernel] hda: cache flushes supported
>Aug 31 03:50:26 [kernel]  hda: hda1 hda2
>Aug 31 03:50:26 [kernel] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Aug 31 03:50:26 [kernel] Uniform CD-ROM driver Revision: 3.20
>Aug 31 03:50:26 [kernel] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Aug 31 03:50:26 [kernel] libata version 1.20 loaded.
>Aug 31 03:50:26 [kernel] ata_piix 0000:00:1f.2: version 1.05
>Aug 31 03:50:26 [kernel] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:50:26 [kernel] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>Aug 31 03:50:26 [kernel] ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
>Aug 31 03:50:26 [kernel] ata1: dev 0 configured for UDMA/133
>Aug 31 03:50:26 [kernel] scsi0 : ata_piix
>Aug 31 03:50:26 [kernel] ata2: SATA port has no device.
>Aug 31 03:50:26 [kernel] scsi1 : ata_piix
>Aug 31 03:50:26 [kernel]   Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
>Aug 31 03:50:26 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 05
>Aug 31 03:50:26 [kernel] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>Aug 31 03:50:26 [kernel] sda: Write Protect is off
>Aug 31 03:50:26 [kernel] sda: Mode Sense: 00 3a 00 00
>Aug 31 03:50:26 [kernel] SCSI device sda: drive cache: write back
>Aug 31 03:50:26 [kernel] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>Aug 31 03:50:26 [kernel] sda: Write Protect is off
>Aug 31 03:50:26 [kernel] sda: Mode Sense: 00 3a 00 00
>Aug 31 03:50:26 [kernel] SCSI device sda: drive cache: write back
>Aug 31 03:50:26 [kernel]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
>Aug 31 03:50:26 [kernel] sd 0:0:0:0: Attached scsi disk sda
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
>Aug 31 03:50:26 [kernel] PCI: setting IRQ 9 as level-triggered
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
>Aug 31 03:50:26 [kernel] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>Aug 31 03:50:26 [kernel] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Aug 31 03:50:26 [kernel] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>Aug 31 03:50:26 [kernel] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>Aug 31 03:50:26 [kernel] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xf4100000
>Aug 31 03:50:26 [kernel] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Aug 31 03:50:26 [kernel] usb usb1: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] hub 1-0:1.0: USB hub found
>Aug 31 03:50:26 [kernel] hub 1-0:1.0: 8 ports detected
>Aug 31 03:50:26 [kernel] USB Universal Host Controller Interface driver v3.0
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>Aug 31 03:50:26 [kernel] PCI: setting IRQ 5 as level-triggered
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:50:26 [kernel] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000bc00
>Aug 31 03:50:26 [kernel] usb usb2: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] hub 2-0:1.0: USB hub found
>Aug 31 03:50:26 [kernel] hub 2-0:1.0: 2 ports detected
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:50:26 [kernel] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b000
>Aug 31 03:50:26 [kernel] usb usb3: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] hub 3-0:1.0: USB hub found
>Aug 31 03:50:26 [kernel] hub 3-0:1.0: 2 ports detected
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:50:26 [kernel] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000b400
>Aug 31 03:50:26 [kernel] usb usb4: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] hub 4-0:1.0: USB hub found
>Aug 31 03:50:26 [kernel] hub 4-0:1.0: 2 ports detected
>Aug 31 03:50:26 [kernel] ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:50:26 [kernel] PCI: Setting latency timer of device 0000:00:1d.3 to 64
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>Aug 31 03:50:26 [kernel] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000b800
>Aug 31 03:50:26 [kernel] usb usb5: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] hub 5-0:1.0: USB hub found
>Aug 31 03:50:26 [kernel] hub 5-0:1.0: 2 ports detected
>Aug 31 03:50:26 [kernel] usb 2-1: new full speed USB device using uhci_hcd and address 2
>Aug 31 03:50:26 [kernel] usb 2-1: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] usb 3-1: new full speed USB device using uhci_hcd and address 2
>Aug 31 03:50:26 [kernel] usb 3-1: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] usb 3-2: new low speed USB device using uhci_hcd and address 3
>Aug 31 03:50:26 [kernel] usb 3-2: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] usb 4-1: new low speed USB device using uhci_hcd and address 2
>Aug 31 03:50:26 [kernel] usb 4-1: configuration #1 chosen from 1 choice
>Aug 31 03:50:26 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1073
>Aug 31 03:50:26 [kernel] usbcore: registered new driver usblp
>Aug 31 03:50:26 [kernel] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Aug 31 03:50:27 [kernel] Initializing USB Mass Storage driver...
>Aug 31 03:50:27 [kernel] scsi2 : SCSI emulation for USB Mass Storage devices
>Aug 31 03:50:27 [kernel] usbcore: registered new driver usb-storage
>Aug 31 03:50:27 [kernel] USB Mass Storage support registered.
>Aug 31 03:50:27 [kernel] usb-storage: device found at 2
>Aug 31 03:50:27 [kernel] usb-storage: waiting for device to settle before scanning
>Aug 31 03:50:27 [kernel] input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input0
>Aug 31 03:50:27 [kernel] input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.1-2
>Aug 31 03:50:27 [kernel] input: Device USB Device as /class/input/input1
>Aug 31 03:50:27 [kernel] input: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:1d.2-1
>Aug 31 03:50:27 [kernel] input: Device USB Device as /class/input/input2
>Aug 31 03:50:27 [kernel] input: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:1d.2-1
>Aug 31 03:50:27 [kernel] usbcore: registered new driver usbhid
>Aug 31 03:50:27 [kernel] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Aug 31 03:50:27 [kernel] i2c /dev entries driver
>Aug 31 03:50:27 [kernel] ip_conntrack version 2.4 (7168 buckets, 57344 max) - 172 bytes per conntrack
>Aug 31 03:50:27 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
>Aug 31 03:50:27 [kernel] TCP bic registered
>Aug 31 03:50:27 [kernel] NET: Registered protocol family 1
>Aug 31 03:50:27 [kernel] NET: Registered protocol family 17
>Aug 31 03:50:27 [kernel] Using IPI Shortcut mode
>Aug 31 03:50:27 [kernel] ACPI wakeup devices: 
>Aug 31 03:50:27 [kernel] PCI0 HUB0 USB0 USB1 USB2 USB3 USBE 
>Aug 31 03:50:27 [kernel] ACPI: (supports S0 S1 S4 S5)
>Aug 31 03:50:27 [kernel] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>Aug 31 03:50:27 [kernel] ReiserFS: sda7: using ordered data mode
>Aug 31 03:50:27 [kernel] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>Aug 31 03:50:27 [kernel] ReiserFS: sda7: checking transaction log (sda7)
>Aug 31 03:50:27 [kernel] ReiserFS: sda7: replayed 88 transactions in 2 seconds
>Aug 31 03:50:27 [kernel] ReiserFS: sda7: Using r5 hash to sort names
>Aug 31 03:50:27 [kernel] VFS: Mounted root (reiserfs filesystem) readonly.
>Aug 31 03:50:27 [kernel] Freeing unused kernel memory: 148k freed
>Aug 31 03:50:27 [kernel]   Vendor: IC        Model: USB Storage-CFC   Rev: 322E
>Aug 31 03:50:27 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
>Aug 31 03:50:27 [kernel] sd 2:0:0:0: Attached scsi removable disk sdb
>Aug 31 03:50:27 [kernel] usb-storage: device scan complete
>Aug 31 03:50:27 [kernel] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 7
>Aug 31 03:50:27 [kernel] PCI: setting IRQ 7 as level-triggered
>Aug 31 03:50:27 [kernel] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK0] -> GSI 7 (level, low) -> IRQ 7
>Aug 31 03:50:27 [kernel] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>Aug 31 03:50:27 [kernel] input: PC Speaker as /class/input/input3
>Aug 31 03:50:27 [kernel] Linux agpgart interface v0.101 (c) Dave Jones
>Aug 31 03:50:27 [kernel] agpgart: Detected an Intel 865 Chipset.
>Aug 31 03:50:27 [kernel] agpgart: AGP aperture is 128M @ 0xd8000000
>Aug 31 03:50:27 [kernel] [drm] Initialized drm 1.0.1 20051102
>Aug 31 03:50:27 [kernel] PCI: Unable to reserve mem region #1:8000000@e0000000 for device 0000:01:00.0
>Aug 31 03:50:27 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:50:27 [kernel] [drm] Initialized radeon 1.25.0 20060524 on minor 0: 
>Aug 31 03:50:27 [kernel] [drm] Used old pci detect: framebuffer loaded
>Aug 31 03:50:27 [kernel] Linux video capture interface: v1.00
>Aug 31 03:50:27 [kernel] bttv: driver version 0.9.16 loaded
>Aug 31 03:50:27 [kernel] bttv: using 8 buffers with 2080k (520 pages) each for capture
>Aug 31 03:50:27 [kernel] bttv: Bt8xx card found (0).
>Aug 31 03:50:27 [kernel] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:50:27 [kernel] bttv0: Bt878 (rev 17) at 0000:02:04.0, irq: 11, latency: 32, mmio: 0xf4000000
>Aug 31 03:50:27 [kernel] bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is bd11:ff00
>Aug 31 03:50:27 [kernel] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
>Aug 31 03:50:27 [kernel] bttv0: gpio: en=00000000, out=00000000 in=00ff33ff [init]
>Aug 31 03:50:27 [kernel] bttv0: i2c: checking for MSP34xx @ 0x80... not found
>Aug 31 03:50:27 [kernel] bttv0: miro: id=12 tuner=5 radio=no stereo=no
>Aug 31 03:50:27 [kernel] bttv0: using tuner=5
>Aug 31 03:50:27 [kernel] bttv0: i2c: checking for MSP34xx @ 0x80... not found
>Aug 31 03:50:27 [kernel] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>Aug 31 03:50:27 [kernel] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>Aug 31 03:50:27 [kernel] bttv0: i2c: checking for TDA9887 @ 0x86... not found
>Aug 31 03:50:27 [kernel] tuner 1-0060: All bytes are equal. It is not a TEA5767
>Aug 31 03:50:27 [kernel] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
>Aug 31 03:50:27 [kernel] tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>Aug 31 03:50:27 [kernel] bttv0: registered device video0
>Aug 31 03:50:27 [kernel] bttv0: registered device vbi0
>Aug 31 03:50:27 [kernel] bttv0: PLL: 28636363 => 35468950 .. ok
>Aug 31 03:50:27 [kernel] Floppy drive(s): fd0 is 1.44M
>Aug 31 03:50:27 [kernel] FDC 0 is a post-1991 82077
>Aug 31 03:50:27 [kernel] NTFS volume version 3.1.
>                - Last output repeated twice -
>Aug 31 03:50:27 [kernel] Adding 538136k swap on /dev/sda6.  Priority:-1 extents:1 across:538136k
>Aug 31 03:50:31 [kernel] skge eth0: enabling interface
>Aug 31 03:50:32 [kernel] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
>Aug 31 03:50:41 [kernel] it87: Found IT8712F chip at 0x290, revision 5
>Aug 31 03:50:55 [kernel] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>Aug 31 03:50:55 [kernel] ReiserFS: sda5: using ordered data mode
>Aug 31 03:50:55 [kernel] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>Aug 31 03:50:55 [kernel] ReiserFS: sda5: checking transaction log (sda5)
>Aug 31 03:50:55 [kernel] ReiserFS: sda5: Using r5 hash to sort names
>Aug 31 03:51:46 [kernel] skge eth0: disabling interface
>Aug 31 03:51:53 [kernel] ACPI: PCI interrupt for device 0000:02:02.0 disabled
>Aug 31 03:52:49 [kernel]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>Aug 31 03:52:49 [kernel]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
>Aug 31 03:52:49 [kernel]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
>Aug 31 03:52:49 [kernel]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
>Aug 31 03:52:49 [kernel]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Aug 31 03:52:49 [kernel] Warning only 896MB will be used.
>Aug 31 03:52:49 [kernel] Use a HIGHMEM enabled kernel.
>Aug 31 03:52:49 [kernel] 896MB LOWMEM available.
>Aug 31 03:52:49 [kernel] On node 0 totalpages: 229376
>Aug 31 03:52:49 [kernel]   DMA zone: 4096 pages, LIFO batch:0
>Aug 31 03:52:49 [kernel]   Normal zone: 225280 pages, LIFO batch:31
>Aug 31 03:52:49 [kernel] DMI 2.3 present.
>Aug 31 03:52:49 [kernel] ACPI: RSDP (v000 GBT                                   ) @ 0x000f6950
>Aug 31 03:52:49 [kernel] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
>Aug 31 03:52:49 [kernel] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff30c0
>Aug 31 03:52:49 [kernel] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7000
>Aug 31 03:52:49 [kernel] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>Aug 31 03:52:49 [kernel] ACPI: PM-Timer IO Port: 0x1008
>Aug 31 03:52:49 [kernel] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Aug 31 03:52:49 [kernel] Built 1 zonelists
>Aug 31 03:52:49 [kernel] Kernel command line: root=/dev/sda7 video=radeonfb:ywrap,mtrr:3,1024x768-32@75 splash=silent,theme:AquaMatrix fbcon=scrollback:128K quiet CONSOLE=/dev/tty1
>Aug 31 03:52:49 [kernel] Enabling fast FPU save and restore... done.
>Aug 31 03:52:49 [kernel] Enabling unmasked SIMD FPU exception support... done.
>Aug 31 03:52:49 [kernel] Initializing CPU#0
>Aug 31 03:52:49 [kernel] PID hash table entries: 4096 (order: 12, 16384 bytes)
>Aug 31 03:52:49 [kernel] Detected 3416.608 MHz processor.
>Aug 31 03:52:49 [kernel] Using pmtmr for high-res timesource
>Aug 31 03:52:49 [kernel] Console: colour VGA+ 80x25
>Aug 31 03:52:49 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Aug 31 03:52:49 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Aug 31 03:52:49 [kernel] Memory: 904964k/917504k available (2011k kernel code, 11980k reserved, 746k data, 140k init, 0k highmem)
>Aug 31 03:52:49 [kernel] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Aug 31 03:52:49 [kernel] Calibrating delay using timer specific routine.. 6837.79 BogoMIPS (lpj=34188970)
>Aug 31 03:52:49 [kernel] Mount-cache hash table entries: 512
>Aug 31 03:52:49 [kernel] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>Aug 31 03:52:49 [kernel] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>Aug 31 03:52:49 [kernel] monitor/mwait feature present.
>Aug 31 03:52:49 [kernel] using mwait in idle threads.
>Aug 31 03:52:49 [kernel] CPU: Trace cache: 12K uops, L1 D cache: 16K
>Aug 31 03:52:49 [kernel] CPU: L2 cache: 1024K
>Aug 31 03:52:49 [kernel] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
>Aug 31 03:52:49 [kernel] Intel machine check architecture supported.
>Aug 31 03:52:49 [kernel] Intel machine check reporting enabled on CPU#0.
>Aug 31 03:52:49 [kernel] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Aug 31 03:52:49 [kernel] CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 04
>Aug 31 03:52:49 [kernel] Checking 'hlt' instruction... OK.
>Aug 31 03:52:49 [kernel] SMP alternatives: switching to UP code
>Aug 31 03:52:49 [kernel] Freeing SMP alternatives: 0k freed
>Aug 31 03:52:49 [kernel] ACPI: setting ELCR to 0200 (from 0ea8)
>Aug 31 03:52:49 [kernel] checking if image is initramfs... it is
>Aug 31 03:52:49 [kernel] Freeing initrd memory: 426k freed
>Aug 31 03:52:49 [kernel] NET: Registered protocol family 16
>Aug 31 03:52:49 [kernel] ACPI: bus type pci registered
>Aug 31 03:52:49 [kernel] PCI: PCI BIOS revision 2.10 entry at 0xfafe0, last bus=2
>Aug 31 03:52:49 [kernel] Setting up standard PCI resources
>Aug 31 03:52:49 [kernel] ACPI: Subsystem revision 20060127
>Aug 31 03:52:49 [kernel] ACPI: Interpreter enabled
>Aug 31 03:52:49 [kernel] ACPI: Using PIC for interrupt routing
>Aug 31 03:52:49 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00)
>Aug 31 03:52:49 [kernel] PCI: Probing PCI hardware (bus 00)
>Aug 31 03:52:49 [kernel] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>Aug 31 03:52:49 [kernel] PCI quirk: region 1080-10bf claimed by ICH4 GPIO
>Aug 31 03:52:49 [kernel] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Aug 31 03:52:49 [kernel] Boot video device is 0000:01:00.0
>Aug 31 03:52:49 [kernel] PCI: Transparent bridge - 0000:00:1e.0
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Aug 31 03:52:49 [kernel] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>Aug 31 03:52:49 [kernel] usbcore: registered new driver usbfs
>Aug 31 03:52:49 [kernel] usbcore: registered new driver hub
>Aug 31 03:52:49 [kernel] PCI: Using ACPI for IRQ routing
>Aug 31 03:52:49 [kernel] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Aug 31 03:52:49 [kernel] PCI: Bridge: 0000:00:01.0
>Aug 31 03:52:49 [kernel]   IO window: 9000-9fff
>Aug 31 03:52:49 [kernel]   MEM window: f0000000-f1ffffff
>Aug 31 03:52:49 [kernel]   PREFETCH window: e0000000-efffffff
>Aug 31 03:52:49 [kernel] PCI: Bridge: 0000:00:1e.0
>Aug 31 03:52:49 [kernel]   IO window: a000-afff
>Aug 31 03:52:49 [kernel]   MEM window: f2000000-f3ffffff
>Aug 31 03:52:49 [kernel]   PREFETCH window: f4000000-f40fffff
>Aug 31 03:52:49 [kernel] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Aug 31 03:52:49 [kernel] NET: Registered protocol family 2
>Aug 31 03:52:49 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>Aug 31 03:52:49 [kernel] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
>Aug 31 03:52:49 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>Aug 31 03:52:49 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
>Aug 31 03:52:49 [kernel] TCP reno registered
>Aug 31 03:52:49 [kernel] Machine check exception polling timer started.
>Aug 31 03:52:49 [kernel] NTFS driver 2.1.27 [Flags: R/O].
>Aug 31 03:52:49 [kernel] fuse init (API version 7.6)
>Aug 31 03:52:49 [kernel] io scheduler noop registered
>Aug 31 03:52:49 [kernel] io scheduler cfq registered (default)
>Aug 31 03:52:49 [kernel] Real Time Clock Driver v1.12ac
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>Aug 31 03:52:50 [kernel] PCI: setting IRQ 5 as level-triggered
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:52:50 [kernel] radeonfb: Found Intel x86 BIOS ROM Image
>Aug 31 03:52:50 [kernel] radeonfb: Retrieved PLL infos from BIOS
>Aug 31 03:52:50 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=277.00 Mhz, System=270.00 MHz
>Aug 31 03:52:50 [kernel] radeonfb: PLL min 20000 max 40000
>Aug 31 03:52:50 [kernel] radeonfb: Monitor 1 type CRT found
>Aug 31 03:52:50 [kernel] radeonfb: EDID probed
>Aug 31 03:52:50 [kernel] radeonfb: Monitor 2 type CRT found
>Aug 31 03:52:50 [kernel] radeonfb: EDID probed
>Aug 31 03:52:50 [kernel] Console: switching to colour frame buffer device 128x48
>Aug 31 03:52:50 [kernel] fbsplash: console 0 using theme 'AquaMatrix'
>Aug 31 03:52:50 [kernel] fbsplash: switched splash state to 'on' on console 0
>Aug 31 03:52:50 [kernel] radeonfb (0000:01:00.0): ATI Radeon ND 
>Aug 31 03:52:50 [kernel] ACPI: Power Button (FF) [PWRF]
>Aug 31 03:52:50 [kernel] ACPI: Power Button (CM) [PWRB]
>Aug 31 03:52:50 [kernel] ACPI: Fan [FAN] (on)
>Aug 31 03:52:50 [kernel] ACPI: Thermal Zone [THRM] (22 C)
>Aug 31 03:52:50 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
>Aug 31 03:52:50 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
>Aug 31 03:52:50 [kernel] mice: PS/2 mouse device common for all mice
>Aug 31 03:52:50 [kernel] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Aug 31 03:52:50 [kernel] loop: loaded (max 8 devices)
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>Aug 31 03:52:50 [kernel] PCI: setting IRQ 10 as level-triggered
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>Aug 31 03:52:50 [kernel] skge 1.5 addr 0xf3000000 irq 10 chip Yukon-Lite rev 7
>Aug 31 03:52:50 [kernel] skge eth0: addr 00:0f:ea:33:3d:13
>Aug 31 03:52:50 [kernel] PPP generic driver version 2.4.2
>Aug 31 03:52:50 [kernel] PPP Deflate Compression module registered
>Aug 31 03:52:50 [kernel] PPP BSD Compression module registered
>Aug 31 03:52:50 [kernel] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Aug 31 03:52:50 [kernel] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Aug 31 03:52:50 [kernel] ICH5: IDE controller at PCI slot 0000:00:1f.1
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>Aug 31 03:52:50 [kernel] PCI: setting IRQ 11 as level-triggered
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:52:50 [kernel] ICH5: chipset revision 2
>Aug 31 03:52:50 [kernel] ICH5: not 100% native mode: will probe irqs later
>Aug 31 03:52:50 [kernel]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>Aug 31 03:52:50 [kernel]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
>Aug 31 03:52:50 [kernel] Probing IDE interface ide0...
>Aug 31 03:52:50 [kernel] hda: SAMSUNG SP2514N, ATA DISK drive
>Aug 31 03:52:50 [kernel] hdb: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
>Aug 31 03:52:50 [kernel] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Aug 31 03:52:50 [kernel] Probing IDE interface ide1...
>Aug 31 03:52:50 [kernel] hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
>Aug 31 03:52:50 [kernel] ide1 at 0x170-0x177,0x376 on irq 15
>Aug 31 03:52:50 [kernel] hda: max request size: 512KiB
>Aug 31 03:52:50 [kernel] hda: Host Protected Area detected.
>Aug 31 03:52:50 [kernel] _current capacity is 488395055 sectors (250058 MB)
>Aug 31 03:52:50 [kernel] _native  capacity is 488397168 sectors (250059 MB)
>Aug 31 03:52:50 [kernel] hda: Host Protected Area disabled.
>Aug 31 03:52:50 [kernel] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
>Aug 31 03:52:50 [kernel] hda: cache flushes supported
>Aug 31 03:52:50 [kernel]  hda: hda1 hda2
>Aug 31 03:52:50 [kernel] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Aug 31 03:52:50 [kernel] Uniform CD-ROM driver Revision: 3.20
>Aug 31 03:52:50 [kernel] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Aug 31 03:52:50 [kernel] libata version 1.20 loaded.
>Aug 31 03:52:50 [kernel] ata_piix 0000:00:1f.2: version 1.05
>Aug 31 03:52:50 [kernel] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>Aug 31 03:52:50 [kernel] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>Aug 31 03:52:50 [kernel] ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 11
>Aug 31 03:52:50 [kernel] ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 11
>Aug 31 03:52:50 [kernel] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:207f
>Aug 31 03:52:50 [kernel] ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
>Aug 31 03:52:50 [kernel] ata1: dev 0 configured for UDMA/133
>Aug 31 03:52:50 [kernel] scsi0 : ata_piix
>Aug 31 03:52:50 [kernel] ata2: SATA port has no device.
>Aug 31 03:52:50 [kernel] scsi1 : ata_piix
>Aug 31 03:52:50 [kernel]   Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
>Aug 31 03:52:50 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 05
>Aug 31 03:52:50 [kernel] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>Aug 31 03:52:50 [kernel] sda: Write Protect is off
>Aug 31 03:52:50 [kernel] sda: Mode Sense: 00 3a 00 00
>Aug 31 03:52:50 [kernel] SCSI device sda: drive cache: write back
>Aug 31 03:52:50 [kernel] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>Aug 31 03:52:50 [kernel] sda: Write Protect is off
>Aug 31 03:52:50 [kernel] sda: Mode Sense: 00 3a 00 00
>Aug 31 03:52:50 [kernel] SCSI device sda: drive cache: write back
>Aug 31 03:52:50 [kernel]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
>Aug 31 03:52:50 [kernel] sd 0:0:0:0: Attached scsi disk sda
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
>Aug 31 03:52:50 [kernel] PCI: setting IRQ 9 as level-triggered
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
>Aug 31 03:52:50 [kernel] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>Aug 31 03:52:50 [kernel] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Aug 31 03:52:50 [kernel] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>Aug 31 03:52:50 [kernel] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>Aug 31 03:52:50 [kernel] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xf4100000
>Aug 31 03:52:50 [kernel] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Aug 31 03:52:50 [kernel] usb usb1: configuration #1 chosen from 1 choice
>Aug 31 03:52:50 [kernel] hub 1-0:1.0: USB hub found
>Aug 31 03:52:50 [kernel] hub 1-0:1.0: 8 ports detected
>Aug 31 03:52:50 [kernel] USB Universal Host Controller Interface driver v3.0
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:52:50 [kernel] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000bc00
>Aug 31 03:52:50 [kernel] usb usb2: configuration #1 chosen from 1 choice
>Aug 31 03:52:50 [kernel] hub 2-0:1.0: USB hub found
>Aug 31 03:52:50 [kernel] hub 2-0:1.0: 2 ports detected
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:52:50 [kernel] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b000
>Aug 31 03:52:50 [kernel] usb usb3: configuration #1 chosen from 1 choice
>Aug 31 03:52:50 [kernel] hub 3-0:1.0: USB hub found
>Aug 31 03:52:50 [kernel] hub 3-0:1.0: 2 ports detected
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:52:50 [kernel] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000b400
>Aug 31 03:52:50 [kernel] usb usb4: configuration #1 chosen from 1 choice
>Aug 31 03:52:50 [kernel] hub 4-0:1.0: USB hub found
>Aug 31 03:52:50 [kernel] hub 4-0:1.0: 2 ports detected
>Aug 31 03:52:50 [kernel] ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:52:50 [kernel] PCI: Setting latency timer of device 0000:00:1d.3 to 64
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>Aug 31 03:52:50 [kernel] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000b800
>Aug 31 03:52:50 [kernel] usb usb5: configuration #1 chosen from 1 choice
>Aug 31 03:52:50 [kernel] hub 5-0:1.0: USB hub found
>Aug 31 03:52:50 [kernel] hub 5-0:1.0: 2 ports detected
>Aug 31 03:52:51 [kernel] usb 2-1: new full speed USB device using uhci_hcd and address 2
>Aug 31 03:52:51 [kernel] usb 2-1: configuration #1 chosen from 1 choice
>Aug 31 03:52:51 [kernel] usb 3-1: new full speed USB device using uhci_hcd and address 2
>Aug 31 03:52:51 [kernel] usb 3-1: configuration #1 chosen from 1 choice
>Aug 31 03:52:51 [kernel] usb 3-2: new low speed USB device using uhci_hcd and address 3
>Aug 31 03:52:51 [kernel] usb 3-2: configuration #1 chosen from 1 choice
>Aug 31 03:52:51 [kernel] usb 4-1: new low speed USB device using uhci_hcd and address 2
>Aug 31 03:52:51 [kernel] usb 4-1: configuration #1 chosen from 1 choice
>Aug 31 03:52:51 [kernel] usbcore: registered new driver usblp
>Aug 31 03:52:51 [kernel] Initializing USB Mass Storage driver...
>Aug 31 03:52:51 [kernel] scsi2 : SCSI emulation for USB Mass Storage devices
>Aug 31 03:52:51 [kernel] usbcore: registered new driver usb-storage
>Aug 31 03:52:51 [kernel] USB Mass Storage support registered.
>Aug 31 03:52:51 [kernel] usb-storage: device found at 2
>Aug 31 03:52:51 [kernel] usb-storage: waiting for device to settle before scanning
>Aug 31 03:52:51 [kernel] input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input0
>Aug 31 03:52:51 [kernel] input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.1-2
>Aug 31 03:52:51 [kernel] input: Device USB Device as /class/input/input1
>Aug 31 03:52:51 [kernel] input: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:1d.2-1
>Aug 31 03:52:51 [kernel] input: Device USB Device as /class/input/input2
>Aug 31 03:52:51 [kernel] input: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:1d.2-1
>Aug 31 03:52:51 [kernel] usbcore: registered new driver usbhid
>Aug 31 03:52:51 [kernel] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Aug 31 03:52:51 [kernel] i2c /dev entries driver
>Aug 31 03:52:51 [kernel] ip_conntrack version 2.4 (7168 buckets, 57344 max) - 172 bytes per conntrack
>Aug 31 03:52:51 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
>Aug 31 03:52:51 [kernel] TCP bic registered
>Aug 31 03:52:51 [kernel] NET: Registered protocol family 1
>Aug 31 03:52:51 [kernel] NET: Registered protocol family 17
>Aug 31 03:52:51 [kernel] Using IPI Shortcut mode
>Aug 31 03:52:51 [kernel] ACPI wakeup devices: 
>Aug 31 03:52:51 [kernel] PCI0 HUB0 USB0 USB1 USB2 USB3 USBE 
>Aug 31 03:52:51 [kernel] ACPI: (supports S0 S1 S4 S5)
>Aug 31 03:52:51 [kernel] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>Aug 31 03:52:51 [kernel] ReiserFS: sda7: using ordered data mode
>Aug 31 03:52:51 [kernel] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>Aug 31 03:52:51 [kernel] ReiserFS: sda7: checking transaction log (sda7)
>Aug 31 03:52:51 [kernel] ReiserFS: sda7: Using r5 hash to sort names
>Aug 31 03:52:51 [kernel] VFS: Mounted root (reiserfs filesystem) readonly.
>Aug 31 03:52:51 [kernel] Freeing unused kernel memory: 140k freed
>Aug 31 03:52:51 [kernel]   Vendor: IC        Model: USB Storage-CFC   Rev: 322E
>Aug 31 03:52:51 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
>Aug 31 03:52:51 [kernel] sd 2:0:0:0: Attached scsi removable disk sdb
>Aug 31 03:52:51 [kernel] usb-storage: device scan complete
>Aug 31 03:52:51 [kernel] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 7
>Aug 31 03:52:51 [kernel] PCI: setting IRQ 7 as level-triggered
>Aug 31 03:52:51 [kernel] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK0] -> GSI 7 (level, low) -> IRQ 7
>Aug 31 03:52:51 [kernel] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>Aug 31 03:52:51 [kernel] input: PC Speaker as /class/input/input3
>Aug 31 03:52:51 [kernel] Linux agpgart interface v0.101 (c) Dave Jones
>Aug 31 03:52:51 [kernel] agpgart: Detected an Intel 865 Chipset.
>Aug 31 03:52:51 [kernel] agpgart: AGP aperture is 128M @ 0xd8000000
>Aug 31 03:52:51 [kernel] [drm] Initialized drm 1.0.1 20051102
>Aug 31 03:52:51 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:52:51 [kernel] [drm] Initialized radeon 1.25.0 20060524 on minor 0: 
>Aug 31 03:52:51 [kernel] [drm] Used old pci detect: framebuffer loaded
>Aug 31 03:52:51 [kernel] Linux video capture interface: v1.00
>Aug 31 03:52:51 [kernel] bttv: driver version 0.9.16 loaded
>Aug 31 03:52:51 [kernel] bttv: using 8 buffers with 2080k (520 pages) each for capture
>Aug 31 03:52:51 [kernel] bttv: Bt8xx card found (0).
>Aug 31 03:52:51 [kernel] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:52:51 [kernel] bttv0: Bt878 (rev 17) at 0000:02:04.0, irq: 11, latency: 32, mmio: 0xf4000000
>Aug 31 03:52:51 [kernel] bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is bd11:ff00
>Aug 31 03:52:51 [kernel] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
>Aug 31 03:52:51 [kernel] bttv0: gpio: en=00000000, out=00000000 in=00ff33ff [init]
>Aug 31 03:52:51 [kernel] bttv0: i2c: checking for MSP34xx @ 0x80... not found
>Aug 31 03:52:51 [kernel] bttv0: miro: id=12 tuner=5 radio=no stereo=no
>Aug 31 03:52:51 [kernel] bttv0: using tuner=5
>Aug 31 03:52:51 [kernel] bttv0: i2c: checking for MSP34xx @ 0x80... not found
>Aug 31 03:52:51 [kernel] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>Aug 31 03:52:51 [kernel] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>Aug 31 03:52:51 [kernel] bttv0: i2c: checking for TDA9887 @ 0x86... not found
>Aug 31 03:52:51 [kernel] tuner 5-0060: All bytes are equal. It is not a TEA5767
>Aug 31 03:52:51 [kernel] tuner 5-0060: chip found @ 0xc0 (bt878 #0 [sw])
>Aug 31 03:52:51 [kernel] tuner 5-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>Aug 31 03:52:51 [kernel] bttv0: registered device video0
>Aug 31 03:52:51 [kernel] bttv0: registered device vbi0
>Aug 31 03:52:51 [kernel] bttv0: PLL: 28636363 => 35468950 .. ok
>Aug 31 03:52:51 [kernel] Floppy drive(s): fd0 is 1.44M
>Aug 31 03:52:51 [kernel] FDC 0 is a post-1991 82077
>Aug 31 03:52:51 [kernel] NTFS volume version 3.1.
>                - Last output repeated twice -
>Aug 31 03:52:51 [kernel] Adding 538136k swap on /dev/sda6.  Priority:-1 extents:1 across:538136k
>Aug 31 03:52:55 [kernel] skge eth0: enabling interface
>Aug 31 03:52:56 [kernel] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
>Aug 31 03:53:06 [kernel] it87: Found IT8712F chip at 0x290, revision 5
>Aug 31 03:53:46 [kernel] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>Aug 31 03:53:46 [kernel] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>Aug 31 03:53:46 [kernel] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>Aug 31 03:53:47 [kernel] [drm] Setting GART location based on new memory map
>Aug 31 03:53:47 [kernel] [drm] Loading R300 Microcode
>Aug 31 03:53:47 [kernel] [drm] writeback test succeeded in 1 usecs
>Aug 31 03:56:55 [kernel]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
>Aug 31 03:56:56 [kernel]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
>Aug 31 03:56:56 [kernel]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
>Aug 31 03:56:56 [kernel]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Aug 31 03:56:56 [kernel] Warning only 896MB will be used.
>Aug 31 03:56:56 [kernel] Use a HIGHMEM enabled kernel.
>Aug 31 03:56:56 [kernel] 896MB LOWMEM available.
>Aug 31 03:56:56 [kernel] On node 0 totalpages: 229376
>Aug 31 03:56:56 [kernel]   DMA zone: 4096 pages, LIFO batch:0
>Aug 31 03:56:56 [kernel]   Normal zone: 225280 pages, LIFO batch:31
>Aug 31 03:56:56 [kernel] DMI 2.3 present.
>Aug 31 03:56:56 [kernel] ACPI: RSDP (v000 GBT                                   ) @ 0x000f6950
>Aug 31 03:56:56 [kernel] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
>Aug 31 03:56:56 [kernel] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff30c0
>Aug 31 03:56:56 [kernel] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7000
>Aug 31 03:56:56 [kernel] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>Aug 31 03:56:56 [kernel] ACPI: PM-Timer IO Port: 0x1008
>Aug 31 03:56:56 [kernel] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Aug 31 03:56:56 [kernel] Built 1 zonelists
>Aug 31 03:56:56 [kernel] Kernel command line: root=/dev/sda7 video=radeonfb:ywrap,mtrr:3,1024x768-32@75 splash=silent,theme:AquaMatrix fbcon=scrollback:128K quiet CONSOLE=/dev/tty1
>Aug 31 03:56:56 [kernel] Enabling fast FPU save and restore... done.
>Aug 31 03:56:56 [kernel] Enabling unmasked SIMD FPU exception support... done.
>Aug 31 03:56:56 [kernel] Initializing CPU#0
>Aug 31 03:56:56 [kernel] PID hash table entries: 4096 (order: 12, 16384 bytes)
>Aug 31 03:56:56 [kernel] Detected 3416.638 MHz processor.
>Aug 31 03:56:56 [kernel] Using pmtmr for high-res timesource
>Aug 31 03:56:56 [kernel] Console: colour VGA+ 80x25
>Aug 31 03:56:56 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Aug 31 03:56:56 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Aug 31 03:56:56 [kernel] Memory: 904964k/917504k available (2011k kernel code, 11980k reserved, 746k data, 140k init, 0k highmem)
>Aug 31 03:56:56 [kernel] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Aug 31 03:56:56 [kernel] Calibrating delay using timer specific routine.. 6837.75 BogoMIPS (lpj=34188776)
>Aug 31 03:56:56 [kernel] Mount-cache hash table entries: 512
>Aug 31 03:56:56 [kernel] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>Aug 31 03:56:56 [kernel] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>Aug 31 03:56:56 [kernel] monitor/mwait feature present.
>Aug 31 03:56:56 [kernel] using mwait in idle threads.
>Aug 31 03:56:56 [kernel] CPU: Trace cache: 12K uops, L1 D cache: 16K
>Aug 31 03:56:56 [kernel] CPU: L2 cache: 1024K
>Aug 31 03:56:56 [kernel] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
>Aug 31 03:56:56 [kernel] Intel machine check architecture supported.
>Aug 31 03:56:56 [kernel] Intel machine check reporting enabled on CPU#0.
>Aug 31 03:56:56 [kernel] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Aug 31 03:56:56 [kernel] CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 04
>Aug 31 03:56:56 [kernel] Checking 'hlt' instruction... OK.
>Aug 31 03:56:56 [kernel] SMP alternatives: switching to UP code
>Aug 31 03:56:56 [kernel] Freeing SMP alternatives: 0k freed
>Aug 31 03:56:56 [kernel] ACPI: setting ELCR to 0200 (from 0ea8)
>Aug 31 03:56:56 [kernel] checking if image is initramfs... it is
>Aug 31 03:56:56 [kernel] Freeing initrd memory: 426k freed
>Aug 31 03:56:56 [kernel] NET: Registered protocol family 16
>Aug 31 03:56:56 [kernel] ACPI: bus type pci registered
>Aug 31 03:56:56 [kernel] PCI: PCI BIOS revision 2.10 entry at 0xfafe0, last bus=2
>Aug 31 03:56:56 [kernel] Setting up standard PCI resources
>Aug 31 03:56:56 [kernel] ACPI: Subsystem revision 20060127
>Aug 31 03:56:56 [kernel] ACPI: Interpreter enabled
>Aug 31 03:56:56 [kernel] ACPI: Using PIC for interrupt routing
>Aug 31 03:56:56 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00)
>Aug 31 03:56:56 [kernel] PCI: Probing PCI hardware (bus 00)
>Aug 31 03:56:56 [kernel] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>Aug 31 03:56:56 [kernel] PCI quirk: region 1080-10bf claimed by ICH4 GPIO
>Aug 31 03:56:56 [kernel] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Aug 31 03:56:56 [kernel] Boot video device is 0000:01:00.0
>Aug 31 03:56:56 [kernel] PCI: Transparent bridge - 0000:00:1e.0
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Aug 31 03:56:56 [kernel] PCI: Using ACPI for IRQ routing
>Aug 31 03:56:56 [kernel] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Aug 31 03:56:56 [kernel] PCI: Bridge: 0000:00:01.0
>Aug 31 03:56:56 [kernel]   IO window: 9000-9fff
>Aug 31 03:56:56 [kernel]   MEM window: f0000000-f1ffffff
>Aug 31 03:56:56 [kernel]   PREFETCH window: e0000000-efffffff
>Aug 31 03:56:56 [kernel] PCI: Bridge: 0000:00:1e.0
>Aug 31 03:56:56 [kernel]   IO window: a000-afff
>Aug 31 03:56:56 [kernel]   MEM window: f2000000-f3ffffff
>Aug 31 03:56:56 [kernel]   PREFETCH window: f4000000-f40fffff
>Aug 31 03:56:56 [kernel] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Aug 31 03:56:56 [kernel] NET: Registered protocol family 2
>Aug 31 03:56:56 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>Aug 31 03:56:56 [kernel] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
>Aug 31 03:56:56 [kernel] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>Aug 31 03:56:56 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
>Aug 31 03:56:56 [kernel] TCP reno registered
>Aug 31 03:56:56 [kernel] Machine check exception polling timer started.
>Aug 31 03:56:56 [kernel] NTFS driver 2.1.27 [Flags: R/O].
>Aug 31 03:56:56 [kernel] fuse init (API version 7.6)
>Aug 31 03:56:56 [kernel] io scheduler noop registered
>Aug 31 03:56:56 [kernel] io scheduler cfq registered (default)
>Aug 31 03:56:56 [kernel] Real Time Clock Driver v1.12ac
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>Aug 31 03:56:56 [kernel] PCI: setting IRQ 5 as level-triggered
>Aug 31 03:56:56 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:56:56 [kernel] radeonfb: Found Intel x86 BIOS ROM Image
>Aug 31 03:56:56 [kernel] radeonfb: Retrieved PLL infos from BIOS
>Aug 31 03:56:56 [kernel] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=277.00 Mhz, System=270.00 MHz
>Aug 31 03:56:56 [kernel] radeonfb: PLL min 20000 max 40000
>Aug 31 03:56:56 [kernel] radeonfb: Monitor 1 type CRT found
>Aug 31 03:56:56 [kernel] radeonfb: EDID probed
>Aug 31 03:56:56 [kernel] radeonfb: Monitor 2 type CRT found
>Aug 31 03:56:56 [kernel] radeonfb: EDID probed
>Aug 31 03:56:56 [kernel] Console: switching to colour frame buffer device 128x48
>Aug 31 03:56:56 [kernel] fbsplash: console 0 using theme 'AquaMatrix'
>Aug 31 03:56:57 [kernel] fbsplash: switched splash state to 'on' on console 0
>Aug 31 03:56:57 [kernel] radeonfb (0000:01:00.0): ATI Radeon ND 
>Aug 31 03:56:57 [kernel] ACPI: Power Button (FF) [PWRF]
>Aug 31 03:56:57 [kernel] ACPI: Power Button (CM) [PWRB]
>Aug 31 03:56:57 [kernel] ACPI: Fan [FAN] (on)
>Aug 31 03:56:57 [kernel] ACPI: Thermal Zone [THRM] (22 C)
>Aug 31 03:56:57 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
>Aug 31 03:56:57 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
>Aug 31 03:56:57 [kernel] mice: PS/2 mouse device common for all mice
>Aug 31 03:56:57 [kernel] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Aug 31 03:56:57 [kernel] loop: loaded (max 8 devices)
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>Aug 31 03:56:57 [kernel] PCI: setting IRQ 10 as level-triggered
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>Aug 31 03:56:57 [kernel] skge 1.5 addr 0xf3000000 irq 10 chip Yukon-Lite rev 7
>Aug 31 03:56:57 [kernel] skge eth0: addr 00:0f:ea:33:3d:13
>Aug 31 03:56:57 [kernel] PPP generic driver version 2.4.2
>Aug 31 03:56:57 [kernel] PPP Deflate Compression module registered
>Aug 31 03:56:57 [kernel] PPP BSD Compression module registered
>Aug 31 03:56:57 [kernel] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Aug 31 03:56:57 [kernel] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Aug 31 03:56:57 [kernel] ICH5: IDE controller at PCI slot 0000:00:1f.1
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>Aug 31 03:56:57 [kernel] PCI: setting IRQ 11 as level-triggered
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:56:57 [kernel] ICH5: chipset revision 2
>Aug 31 03:56:57 [kernel] ICH5: not 100% native mode: will probe irqs later
>Aug 31 03:56:57 [kernel]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>Aug 31 03:56:57 [kernel]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
>Aug 31 03:56:57 [kernel] Probing IDE interface ide0...
>Aug 31 03:56:57 [kernel] hda: SAMSUNG SP2514N, ATA DISK drive
>Aug 31 03:56:57 [kernel] hdb: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
>Aug 31 03:56:57 [kernel] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Aug 31 03:56:57 [kernel] Probing IDE interface ide1...
>Aug 31 03:56:57 [kernel] hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
>Aug 31 03:56:57 [kernel] ide1 at 0x170-0x177,0x376 on irq 15
>Aug 31 03:56:57 [kernel] hda: max request size: 512KiB
>Aug 31 03:56:57 [kernel] hda: Host Protected Area detected.
>Aug 31 03:56:57 [kernel] _current capacity is 488395055 sectors (250058 MB)
>Aug 31 03:56:57 [kernel] _native  capacity is 488397168 sectors (250059 MB)
>Aug 31 03:56:57 [kernel] hda: Host Protected Area disabled.
>Aug 31 03:56:57 [kernel] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
>Aug 31 03:56:57 [kernel] hda: cache flushes supported
>Aug 31 03:56:57 [kernel]  hda: hda1 hda2
>Aug 31 03:56:57 [kernel] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Aug 31 03:56:57 [kernel] Uniform CD-ROM driver Revision: 3.20
>Aug 31 03:56:57 [kernel] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Aug 31 03:56:57 [kernel] libata version 1.20 loaded.
>Aug 31 03:56:57 [kernel] ata_piix 0000:00:1f.2: version 1.05
>Aug 31 03:56:57 [kernel] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:56:57 [kernel] ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 11
>Aug 31 03:56:57 [kernel] ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 11
>Aug 31 03:56:57 [kernel] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:207f
>Aug 31 03:56:57 [kernel] ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
>Aug 31 03:56:57 [kernel] ata1: dev 0 configured for UDMA/133
>Aug 31 03:56:57 [kernel] scsi0 : ata_piix
>Aug 31 03:56:57 [kernel] ata2: SATA port has no device.
>Aug 31 03:56:57 [kernel] scsi1 : ata_piix
>Aug 31 03:56:57 [kernel]   Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
>Aug 31 03:56:57 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 05
>Aug 31 03:56:57 [kernel] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>Aug 31 03:56:57 [kernel] sda: Write Protect is off
>Aug 31 03:56:57 [kernel] sda: Mode Sense: 00 3a 00 00
>Aug 31 03:56:57 [kernel] SCSI device sda: drive cache: write back
>Aug 31 03:56:57 [kernel] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>Aug 31 03:56:57 [kernel] sda: Write Protect is off
>Aug 31 03:56:57 [kernel] sda: Mode Sense: 00 3a 00 00
>Aug 31 03:56:57 [kernel] SCSI device sda: drive cache: write back
>Aug 31 03:56:57 [kernel]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
>Aug 31 03:56:57 [kernel] sd 0:0:0:0: Attached scsi disk sda
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
>Aug 31 03:56:57 [kernel] PCI: setting IRQ 9 as level-triggered
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
>Aug 31 03:56:57 [kernel] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>Aug 31 03:56:57 [kernel] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Aug 31 03:56:57 [kernel] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>Aug 31 03:56:57 [kernel] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>Aug 31 03:56:57 [kernel] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xf4100000
>Aug 31 03:56:57 [kernel] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Aug 31 03:56:57 [kernel] usb usb1: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] hub 1-0:1.0: USB hub found
>Aug 31 03:56:57 [kernel] hub 1-0:1.0: 8 ports detected
>Aug 31 03:56:57 [kernel] USB Universal Host Controller Interface driver v3.0
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:56:57 [kernel] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000bc00
>Aug 31 03:56:57 [kernel] usb usb2: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] hub 2-0:1.0: USB hub found
>Aug 31 03:56:57 [kernel] hub 2-0:1.0: 2 ports detected
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:56:57 [kernel] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b000
>Aug 31 03:56:57 [kernel] usb usb3: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] hub 3-0:1.0: USB hub found
>Aug 31 03:56:57 [kernel] hub 3-0:1.0: 2 ports detected
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:56:57 [kernel] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000b400
>Aug 31 03:56:57 [kernel] usb usb4: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] hub 4-0:1.0: USB hub found
>Aug 31 03:56:57 [kernel] hub 4-0:1.0: 2 ports detected
>Aug 31 03:56:57 [kernel] ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:56:57 [kernel] PCI: Setting latency timer of device 0000:00:1d.3 to 64
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>Aug 31 03:56:57 [kernel] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000b800
>Aug 31 03:56:57 [kernel] usb usb5: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] hub 5-0:1.0: USB hub found
>Aug 31 03:56:57 [kernel] hub 5-0:1.0: 2 ports detected
>Aug 31 03:56:57 [kernel] usb 2-1: new full speed USB device using uhci_hcd and address 2
>Aug 31 03:56:57 [kernel] usb 2-1: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] usb 3-1: new full speed USB device using uhci_hcd and address 2
>Aug 31 03:56:57 [kernel] usb 3-1: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] usb 3-2: new low speed USB device using uhci_hcd and address 3
>Aug 31 03:56:57 [kernel] usb 3-2: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] usb 4-1: new low speed USB device using uhci_hcd and address 2
>Aug 31 03:56:57 [kernel] usb 4-1: configuration #1 chosen from 1 choice
>Aug 31 03:56:57 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1073
>Aug 31 03:56:57 [kernel] Initializing USB Mass Storage driver...
>Aug 31 03:56:57 [kernel] scsi2 : SCSI emulation for USB Mass Storage devices
>Aug 31 03:56:57 [kernel] usbcore: registered new driver usb-storage
>Aug 31 03:56:57 [kernel] USB Mass Storage support registered.
>Aug 31 03:56:57 [kernel] usb-storage: device found at 2
>Aug 31 03:56:57 [kernel] usb-storage: waiting for device to settle before scanning
>Aug 31 03:56:57 [kernel] input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input0
>Aug 31 03:56:57 [kernel] input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.1-2
>Aug 31 03:56:57 [kernel] input: Device USB Device as /class/input/input1
>Aug 31 03:56:57 [kernel] input: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:1d.2-1
>Aug 31 03:56:57 [kernel] input: Device USB Device as /class/input/input2
>Aug 31 03:56:57 [kernel] input: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:1d.2-1
>Aug 31 03:56:57 [kernel] usbcore: registered new driver usbhid
>Aug 31 03:56:57 [kernel] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Aug 31 03:56:57 [kernel] i2c /dev entries driver
>Aug 31 03:56:57 [kernel] ip_conntrack version 2.4 (7168 buckets, 57344 max) - 172 bytes per conntrack
>Aug 31 03:56:57 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
>Aug 31 03:56:58 [kernel] TCP bic registered
>Aug 31 03:56:58 [kernel] NET: Registered protocol family 1
>Aug 31 03:56:58 [kernel] NET: Registered protocol family 17
>Aug 31 03:56:58 [kernel] Using IPI Shortcut mode
>Aug 31 03:56:58 [kernel] ACPI wakeup devices: 
>Aug 31 03:56:58 [kernel] PCI0 HUB0 USB0 USB1 USB2 USB3 USBE 
>Aug 31 03:56:58 [kernel] ACPI: (supports S0 S1 S4 S5)
>Aug 31 03:56:58 [kernel] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>Aug 31 03:56:58 [kernel] ReiserFS: sda7: using ordered data mode
>Aug 31 03:56:58 [kernel] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>Aug 31 03:56:58 [kernel] ReiserFS: sda7: checking transaction log (sda7)
>Aug 31 03:56:58 [kernel] ReiserFS: sda7: replayed 24 transactions in 0 seconds
>Aug 31 03:56:58 [kernel] ReiserFS: sda7: Using r5 hash to sort names
>Aug 31 03:56:58 [kernel] VFS: Mounted root (reiserfs filesystem) readonly.
>Aug 31 03:56:58 [kernel] Freeing unused kernel memory: 140k freed
>Aug 31 03:56:58 [kernel]   Vendor: IC        Model: USB Storage-CFC   Rev: 322E
>Aug 31 03:56:58 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
>Aug 31 03:56:58 [kernel] sd 2:0:0:0: Attached scsi removable disk sdb
>Aug 31 03:56:58 [kernel] usb-storage: device scan complete
>Aug 31 03:56:58 [kernel] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 7
>Aug 31 03:56:58 [kernel] PCI: setting IRQ 7 as level-triggered
>Aug 31 03:56:58 [kernel] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK0] -> GSI 7 (level, low) -> IRQ 7
>Aug 31 03:56:58 [kernel] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>Aug 31 03:56:58 [kernel] input: PC Speaker as /class/input/input3
>Aug 31 03:56:58 [kernel] Linux agpgart interface v0.101 (c) Dave Jones
>Aug 31 03:56:58 [kernel] agpgart: Detected an Intel 865 Chipset.
>Aug 31 03:56:58 [kernel] agpgart: AGP aperture is 128M @ 0xd8000000
>Aug 31 03:56:58 [kernel] [drm] Initialized drm 1.0.1 20051102
>Aug 31 03:56:58 [kernel] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>Aug 31 03:56:58 [kernel] [drm] Initialized radeon 1.25.0 20060524 on minor 0: 
>Aug 31 03:56:58 [kernel] [drm] Used old pci detect: framebuffer loaded
>Aug 31 03:56:58 [kernel] Linux video capture interface: v1.00
>Aug 31 03:56:58 [kernel] bttv: driver version 0.9.16 loaded
>Aug 31 03:56:58 [kernel] bttv: using 8 buffers with 2080k (520 pages) each for capture
>Aug 31 03:56:58 [kernel] bttv: Bt8xx card found (0).
>Aug 31 03:56:58 [kernel] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Aug 31 03:56:58 [kernel] bttv0: Bt878 (rev 17) at 0000:02:04.0, irq: 11, latency: 32, mmio: 0xf4000000
>Aug 31 03:56:58 [kernel] bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is bd11:ff00
>Aug 31 03:56:58 [kernel] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
>Aug 31 03:56:58 [kernel] bttv0: gpio: en=00000000, out=00000000 in=00ff33ff [init]
>Aug 31 03:56:58 [kernel] bttv0: i2c: checking for MSP34xx @ 0x80... not found
>Aug 31 03:56:58 [kernel] bttv0: miro: id=12 tuner=5 radio=no stereo=no
>Aug 31 03:56:58 [kernel] bttv0: using tuner=5
>Aug 31 03:56:58 [kernel] bttv0: i2c: checking for MSP34xx @ 0x80... not found
>Aug 31 03:56:58 [kernel] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>Aug 31 03:56:58 [kernel] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>Aug 31 03:56:58 [kernel] bttv0: i2c: checking for TDA9887 @ 0x86... not found
>Aug 31 03:56:58 [kernel] tuner 5-0060: All bytes are equal. It is not a TEA5767
>Aug 31 03:56:58 [kernel] tuner 5-0060: chip found @ 0xc0 (bt878 #0 [sw])
>Aug 31 03:56:58 [kernel] tuner 5-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>Aug 31 03:56:58 [kernel] bttv0: registered device video0
>Aug 31 03:56:58 [kernel] bttv0: registered device vbi0
>Aug 31 03:56:58 [kernel] bttv0: PLL: 28636363 => 35468950 .. ok
>Aug 31 03:56:58 [kernel] Floppy drive(s): fd0 is 1.44M
>Aug 31 03:56:58 [kernel] FDC 0 is a post-1991 82077
>Aug 31 03:56:58 [kernel] NTFS volume version 3.1.
>                - Last output repeated twice -
>Aug 31 03:56:58 [kernel] Adding 538136k swap on /dev/sda6.  Priority:-1 extents:1 across:538136k
>Aug 31 03:57:01 [kernel] skge eth0: enabling interface
>Aug 31 03:57:03 [kernel] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
>Aug 31 03:57:12 [kernel] it87: Found IT8712F chip at 0x290, revision 5
>Aug 31 03:57:47 [kernel] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>Aug 31 03:57:47 [kernel] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>Aug 31 03:57:47 [kernel] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>Aug 31 03:57:47 [kernel] [drm] Setting GART location based on new memory map
>Aug 31 03:57:47 [kernel] [drm] Loading R300 Microcode
>Aug 31 03:57:47 [kernel] [drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 8079: 6755 | 6756 | 6757 | 6758

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.