Attachment 71293 Details for Bug 58101 – dmesg

dmesg

dmesg (text/plain), 60.50 KB, created by Angelo Arrifano on 2012-12-10 22:11:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Angelo Arrifano

Created: 2012-12-10 22:11:49 UTC

Size: 60.50 KB

patch

obsolete

>Dec 10 20:56:57 [kernel] Kernel command line: root=/dev/sda2 gentoo=forcefsck libata.force=1.00:80c memmap=0x04$0x4349A4C8 video=LVDS-1:d video=TV-1:d drm_kms_helper.poll=0 hpet=force #nouveau.noaccel=1
>Dec 10 20:56:57 [kernel] PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dec 10 20:56:57 [kernel] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Dec 10 20:56:57 [kernel] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Dec 10 20:56:57 [kernel] __ex_table already sorted, skipping sort
>Dec 10 20:56:57 [kernel] Checking aperture...
>Dec 10 20:56:57 [kernel] AGP bridge at 00:00:00
>Dec 10 20:56:57 [kernel] Aperture from AGP @ d0000000 old size 32 MB
>Dec 10 20:56:57 [kernel] Aperture from AGP @ d0000000 size 256 MB (APSIZE f00)
>Dec 10 20:56:57 [kernel] Node 0: aperture @ d0000000 size 256 MB
>Dec 10 20:56:57 [kernel] Memory: 1535584k/1572288k available (5397k kernel code, 456k absent, 36248k reserved, 2085k data, 404k init)
>Dec 10 20:56:57 [kernel] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Dec 10 20:56:57 [kernel] NR_IRQS:4352 nr_irqs:256 16
>Dec 10 20:56:57 [kernel] Console: colour VGA+ 80x25
>Dec 10 20:56:57 [kernel] console [tty0] enabled
>Dec 10 20:56:57 [kernel] Fast TSC calibration using PIT
>Dec 10 20:56:57 [kernel] Detected 2201.299 MHz processor.
>Dec 10 20:56:57 [kernel] Calibrating delay loop (skipped), value calculated using timer frequency.. 4402.59 BogoMIPS (lpj=2201299)
>Dec 10 20:56:57 [kernel] pid_max: default: 32768 minimum: 501
>Dec 10 20:56:57 [kernel] Mount-cache hash table entries: 256
>Dec 10 20:56:57 [kernel] tseg: 005ff80000
>Dec 10 20:56:57 [kernel] mce: CPU supports 5 MCE banks
>Dec 10 20:56:57 [kernel] ACPI: Core revision 20120320
>Dec 10 20:56:57 [kernel] Performance Events: AMD PMU driver.
>Dec 10 20:56:57 [kernel] ... version:                0
>Dec 10 20:56:57 [kernel] ... bit width:              48
>Dec 10 20:56:57 [kernel] ... generic registers:      4
>Dec 10 20:56:57 [kernel] ... value mask:             0000ffffffffffff
>Dec 10 20:56:57 [kernel] ... max period:             00007fffffffffff
>Dec 10 20:56:57 [kernel] ... fixed-purpose events:   0
>Dec 10 20:56:57 [kernel] ... event mask:             000000000000000f
>Dec 10 20:56:57 [kernel] MCE: In-kernel MCE decoding enabled.
>Dec 10 20:56:57 [kernel] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>Dec 10 20:56:57 [kernel] PM: Registering ACPI NVS region [mem 0x5ff7a000-0x5ff7ffff] (24576 bytes)
>Dec 10 20:56:57 [kernel] NET: Registered protocol family 16
>Dec 10 20:56:57 [kernel] node 0 link 0: io port [1000, fffff]
>Dec 10 20:56:57 [kernel] TOM: 0000000060000000 aka 1536M
>Dec 10 20:56:57 [kernel] node 0 link 0: mmio [a0000, bffff]
>Dec 10 20:56:57 [kernel] node 0 link 0: mmio [60000000, ffb7ffff]
>Dec 10 20:56:57 [kernel] bus: [00, ff] on node 0 link 0
>Dec 10 20:56:57 [kernel] bus: 00 [io  0x0000-0xffff]
>Dec 10 20:56:57 [kernel] bus: 00 [mem 0x000a0000-0x000bffff]
>Dec 10 20:56:57 [kernel] bus: 00 [mem 0x60000000-0xfcffffffff]
>Dec 10 20:56:57 [kernel] ACPI: bus type pci registered
>Dec 10 20:56:57 [kernel] PCI: Using configuration type 1 for base access
>Dec 10 20:56:57 [kernel] bio: create slab <bio-0> at 0
>Dec 10 20:56:57 [kernel] ACPI: Added _OSI(Module Device)
>Dec 10 20:56:57 [kernel] ACPI: Added _OSI(Processor Device)
>Dec 10 20:56:57 [kernel] ACPI: Added _OSI(3.0 _SCP Extensions)
>Dec 10 20:56:57 [kernel] ACPI: Added _OSI(Processor Aggregator Device)
>Dec 10 20:56:57 [kernel] ACPI: EC: Look up EC in DSDT
>Dec 10 20:56:57 [kernel] ACPI: Interpreter enabled
>Dec 10 20:56:57 [kernel] ACPI: (supports S0 S3 S5)
>Dec 10 20:56:57 [kernel] ACPI: Using IOAPIC for interrupt routing
>Dec 10 20:56:57 [kernel] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
>Dec 10 20:56:57 [kernel] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>Dec 10 20:56:57 [kernel] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>Dec 10 20:56:57 [kernel] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>Dec 10 20:56:57 [kernel] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>Dec 10 20:56:57 [kernel] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>Dec 10 20:56:57 [kernel] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>Dec 10 20:56:57 [kernel] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xffe7ffff] (ignored)
>Dec 10 20:56:57 [kernel] PCI: root bus 00: hardware-probed resources
>Dec 10 20:56:57 [kernel] PCI host bridge to bus 0000:00
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfcffffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0: supports D1
>Dec 10 20:56:57 [kernel] pci 0000:00:0a.0: [1814:0301] type 00 class 0x028000
>Dec 10 20:56:57 [kernel] pci 0000:00:0a.0: reg 10: [mem 0xc0000000-0xc0007fff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: [104c:ac8e] type 02 class 0x060700
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: reg 10: [mem 0x00000000-0x00000fff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: [104c:ac8e] type 02 class 0x060700
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: reg 10: [mem 0x00000000-0x00000fff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.2: [104c:802e] type 00 class 0x0c0010
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.2: reg 10: [mem 0xc000d000-0xc000d7ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.2: reg 14: [mem 0xc0008000-0xc000bfff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.2: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: [10ec:8169] type 00 class 0x020000
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: reg 10: [io  0x1000-0x10ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: reg 14: [mem 0xc000d800-0xc000d8ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
>Dec 10 20:56:57 [kernel] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
>Dec 10 20:56:57 [kernel] pci 0000:00:10.0: reg 20: [io  0x1c00-0x1c1f]
>Dec 10 20:56:57 [kernel] pci 0000:00:10.0: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>Dec 10 20:56:57 [kernel] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
>Dec 10 20:56:57 [kernel] ACPI: Core revision 20120320
>Dec 10 20:56:57 [kernel] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
>Dec 10 20:56:57 [kernel] pci 0000:00:10.2: reg 20: [io  0x1c40-0x1c5f]
>Dec 10 20:56:57 [kernel] pci 0000:00:10.2: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>Dec 10 20:56:57 [kernel] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
>Dec 10 20:56:57 [kernel] pci 0000:00:10.3: reg 10: [mem 0xc000dc00-0xc000dcff]
>Dec 10 20:56:57 [kernel] pci 0000:00:10.3: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>Dec 10 20:56:57 [kernel] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
>Dec 10 20:56:57 [kernel] pci 0000:00:11.0: Force enabled HPET at 0xfed00000
>Dec 10 20:56:57 [kernel] pci 0000:00:11.0: quirk: [io  0x4000-0x407f] claimed by vt8235 PM
>Dec 10 20:56:57 [kernel] pci 0000:00:11.0: quirk: [io  0x8100-0x810f] claimed by vt8235 SMB
>Dec 10 20:56:57 [kernel] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
>Dec 10 20:56:57 [kernel] pci 0000:00:11.1: reg 20: [io  0x1c60-0x1c6f]
>Dec 10 20:56:57 [kernel] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
>Dec 10 20:56:57 [kernel] pci 0000:00:11.5: reg 10: [io  0x1400-0x14ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:11.5: supports D1 D2
>Dec 10 20:56:57 [kernel] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
>Dec 10 20:56:57 [kernel] pci 0000:00:11.6: reg 10: [io  0x1800-0x18ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
>Dec 10 20:56:57 [kernel] pci 0000:01:00.0: [10de:032c] type 00 class 0x030000
>Dec 10 20:56:57 [kernel] pci 0000:01:00.0: reg 10: [mem 0xc1000000-0xc1ffffff]
>Dec 10 20:56:57 [kernel] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0:   bridge window [mem 0xc1000000-0xc1ffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff pref]
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: on NUMA node 0
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Dec 10 20:56:57 [kernel]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 12 14 15) *10
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 12 14 15)
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15)
>Dec 10 20:56:57 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>Dec 10 20:56:57 [kernel] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>Dec 10 20:56:57 [kernel] vgaarb: loaded
>Dec 10 20:56:57 [kernel] vgaarb: bridge control possible 0000:01:00.0
>Dec 10 20:56:57 [kernel] SCSI subsystem initialized
>Dec 10 20:56:57 [kernel] libata version 3.00 loaded.
>Dec 10 20:56:57 [kernel] ACPI: bus type usb registered
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver usbfs
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver hub
>Dec 10 20:56:57 [kernel] usbcore: registered new device driver usb
>Dec 10 20:56:57 [kernel] wmi: Mapper loaded
>Dec 10 20:56:57 [kernel] Advanced Linux Sound Architecture Driver Version 1.0.25.
>Dec 10 20:56:57 [kernel] PCI: Using ACPI for IRQ routing
>Dec 10 20:56:57 [kernel] PCI: pci_cache_line_size set to 64 bytes
>Dec 10 20:56:57 [kernel] pci 0000:00:00.0: address space collision: [mem 0xd0000000-0xdfffffff pref] conflicts with GART [mem 0xd0000000-0xdfffffff]
>Dec 10 20:56:57 [kernel] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>Dec 10 20:56:57 [kernel] e820: reserve RAM buffer [mem 0x4349a4c8-0x43ffffff]
>Dec 10 20:56:57 [kernel] e820: reserve RAM buffer [mem 0x5ff70000-0x5fffffff]
>Dec 10 20:56:57 [kernel] NET: Registered protocol family 23
>Dec 10 20:56:57 [kernel] cfg80211: Calling CRDA to update world regulatory domain
>Dec 10 20:56:57 [kernel] hpet clockevent registered
>Dec 10 20:56:57 [kernel] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Dec 10 20:56:57 [kernel] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>Dec 10 20:56:57 [kernel] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>Dec 10 20:56:57 [kernel] Switching to clocksource hpet
>Dec 10 20:56:57 [kernel] pnp: PnP ACPI init
>Dec 10 20:56:57 [kernel] ACPI: bus type pnp registered
>Dec 10 20:56:57 [kernel] pnp 00:00: [bus 00-ff]
>Dec 10 20:56:57 [kernel] pnp 00:00: [io  0x0cf8-0x0cff]
>Dec 10 20:56:57 [kernel] pnp 00:00: [io  0x0000-0x0cf7 window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [io  0x0d00-0xffff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000e0000-0x000effff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: [mem 0x60000000-0xffe7ffff window]
>Dec 10 20:56:57 [kernel] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>Dec 10 20:56:57 [kernel] pnp 00:01: [dma 4]
>Dec 10 20:56:57 [kernel] pnp 00:01: [io  0x0000-0x000f]
>Dec 10 20:56:57 [kernel] pnp 00:01: [io  0x0081-0x008f]
>Dec 10 20:56:57 [kernel] pnp 00:01: [io  0x00c0-0x00df]
>Dec 10 20:56:57 [kernel] pnp 00:01: [io  0x0092]
>Dec 10 20:56:57 [kernel] pnp 00:01: [io  0x00a8-0x00a9]
>Dec 10 20:56:57 [kernel] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>Dec 10 20:56:57 [kernel] pnp 00:02: [io  0x0070-0x0075]
>Dec 10 20:56:57 [kernel] pnp 00:02: [irq 8]
>Dec 10 20:56:57 [kernel] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>Dec 10 20:56:57 [kernel] pnp 00:03: [io  0x00f0-0x00ff]
>Dec 10 20:56:57 [kernel] pnp 00:03: [irq 13]
>Dec 10 20:56:57 [kernel] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
>Dec 10 20:56:57 [kernel] pnp 00:04: [io  0x0061]
>Dec 10 20:56:57 [kernel] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>Dec 10 20:56:57 [kernel] pnp 00:05: [mem 0x000e0000-0x000fffff]
>Dec 10 20:56:57 [kernel] pnp 00:05: [mem 0xfff00000-0xffffffff]
>Dec 10 20:56:57 [kernel] pnp 00:05: [mem 0xffee0000-0xffefffff]
>Dec 10 20:56:57 [kernel] pnp 00:05: [mem 0xfec00000-0xfec00fff]
>Dec 10 20:56:57 [kernel] pnp 00:05: [mem 0xfee00000-0xfee00fff]
>Dec 10 20:56:57 [kernel] pnp 00:05: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
>Dec 10 20:56:57 [kernel] system 00:05: [mem 0xfff00000-0xffffffff] could not be reserved
>Dec 10 20:56:57 [kernel] system 00:05: [mem 0xffee0000-0xffefffff] has been reserved
>Dec 10 20:56:57 [kernel] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
>Dec 10 20:56:57 [kernel] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
>Dec 10 20:56:57 [kernel] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x002e-0x002f]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x0092]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x0600-0x060f]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x00a8-0x00a9]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x01c0-0x01cf]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x0080]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x04d0-0x04d1]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0xfe10-0xfe11]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0xfe00]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x4000-0x407f]
>Dec 10 20:56:57 [kernel] pnp 00:06: [io  0x8100-0x811f]
>Dec 10 20:56:57 [kernel] pnp 00:06: [mem 0xfec00000-0xfec00fff]
>Dec 10 20:56:57 [kernel] pnp 00:06: [mem 0xfee00000-0xfee00fff]
>Dec 10 20:56:57 [kernel] system 00:06: [io  0x0600-0x060f] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: [io  0x01c0-0x01cf] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: [io  0x04d0-0x04d1] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: [io  0xfe10-0xfe11] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: [io  0xfe00] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: [io  0x4000-0x407f] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: [io  0x8100-0x811f] could not be reserved
>Dec 10 20:56:57 [kernel] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
>Dec 10 20:56:57 [kernel] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
>Dec 10 20:56:57 [kernel] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>Dec 10 20:56:57 [kernel] pnp 00:07: [irq 12]
>Dec 10 20:56:57 [kernel] pnp 00:07: Plug and Play ACPI device, IDs SYN0302 SYN0300 PNP0f13 (active)
>Dec 10 20:56:57 [kernel] pnp 00:08: [io  0x0060]
>Dec 10 20:56:57 [kernel] pnp 00:08: [io  0x0064]
>Dec 10 20:56:57 [kernel] pnp 00:08: [irq 1]
>Dec 10 20:56:57 [kernel] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>Dec 10 20:56:57 [kernel] pnp 00:09: [io  0x0378-0x037f]
>Dec 10 20:56:57 [kernel] pnp 00:09: [io  0x0778-0x077f]
>Dec 10 20:56:57 [kernel] pnp 00:09: [irq 7]
>Dec 10 20:56:57 [kernel] pnp 00:09: [dma 3]
>Dec 10 20:56:57 [kernel] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
>Dec 10 20:56:57 [kernel] pnp 00:0a: [io  0x02f8-0x02ff]
>Dec 10 20:56:57 [kernel] pnp 00:0a: [irq 3]
>Dec 10 20:56:57 [kernel] pnp 00:0a: [dma 1]
>Dec 10 20:56:57 [kernel] pnp 00:0a: Plug and Play ACPI device, IDs NSC6001 (active)
>Dec 10 20:56:57 [kernel] pnp: PnP ACPI: found 11 devices
>Dec 10 20:56:57 [kernel] ACPI: ACPI bus type pnp unregistered
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: BAR 0: assigned [mem 0x60000000-0x60000fff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: BAR 15: assigned [mem 0x64000000-0x67ffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: BAR 15: assigned [mem 0x70000000-0x73ffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: BAR 16: assigned [mem 0x74000000-0x77ffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0c.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: BAR 13: assigned [io  0x2000-0x20ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: BAR 14: assigned [io  0x2400-0x24ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: BAR 13: assigned [io  0x2800-0x28ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: BAR 14: assigned [io  0x2c00-0x2cff]
>Dec 10 20:56:57 [kernel] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0:   bridge window [mem 0xc1000000-0xc1ffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: CardBus bridge to [bus 02-05]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0:   bridge window [io  0x2000-0x20ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0:   bridge window [io  0x2400-0x24ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0:   bridge window [mem 0x64000000-0x67ffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0:   bridge window [mem 0x68000000-0x6bffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: CardBus bridge to [bus 06-09]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1:   bridge window [io  0x2800-0x28ff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1:   bridge window [io  0x2c00-0x2cff]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1:   bridge window [mem 0x70000000-0x73ffffff pref]
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1:   bridge window [mem 0x74000000-0x77ffffff]
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0: setting latency timer to 64
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.0: setting latency timer to 64
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: enabling device (0000 -> 0003)
>Dec 10 20:56:57 [kernel] pci 0000:00:0b.1: setting latency timer to 64
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:00: resource 6 [mem 0x60000000-0xfcffffffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc1ffffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
>Dec 10 20:56:57 [kernel] pci_bus 0000:02: resource 0 [io  0x2000-0x20ff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:02: resource 1 [io  0x2400-0x24ff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:02: resource 2 [mem 0x64000000-0x67ffffff pref]
>Dec 10 20:56:57 [kernel] pci_bus 0000:02: resource 3 [mem 0x68000000-0x6bffffff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:06: resource 0 [io  0x2800-0x28ff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:06: resource 1 [io  0x2c00-0x2cff]
>Dec 10 20:56:57 [kernel] pci_bus 0000:06: resource 2 [mem 0x70000000-0x73ffffff pref]
>Dec 10 20:56:57 [kernel] pci_bus 0000:06: resource 3 [mem 0x74000000-0x77ffffff]
>Dec 10 20:56:57 [kernel] NET: Registered protocol family 2
>Dec 10 20:56:57 [kernel] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>Dec 10 20:56:57 [kernel] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>Dec 10 20:56:57 [kernel] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>Dec 10 20:56:57 [kernel] TCP: Hash tables configured (established 262144 bind 65536)
>Dec 10 20:56:57 [kernel] TCP: reno registered
>Dec 10 20:56:57 [kernel] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>Dec 10 20:56:57 [kernel] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>Dec 10 20:56:57 [kernel] NET: Registered protocol family 1
>Dec 10 20:56:57 [kernel] pci 0000:00:00.0: MSI quirk detected; MSI disabled
>Dec 10 20:56:57 [kernel] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>Dec 10 20:56:57 [kernel] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x1020
>Dec 10 20:56:57 [kernel] pci 0000:00:10.0: Performing full reset
>Dec 10 20:56:57 [kernel] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x2000
>Dec 10 20:56:57 [kernel] pci 0000:00:10.1: Performing full reset
>Dec 10 20:56:57 [kernel] pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x2000
>Dec 10 20:56:57 [kernel] pci 0000:00:10.2: Performing full reset
>Dec 10 20:56:57 [kernel] pci 0000:01:00.0: Boot video device
>Dec 10 20:56:57 [kernel] PCI: CLS 64 bytes, default 64
>Dec 10 20:56:57 [kernel] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
>Dec 10 20:56:57 [kernel] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Dec 10 20:56:57 [kernel] audit: initializing netlink socket (disabled)
>Dec 10 20:56:57 [kernel] type=2000 audit(1355172957.089:1): initialized
>Dec 10 20:56:57 [kernel] fuse init (API version 7.19)
>Dec 10 20:56:57 [kernel] msgmni has been set to 2999
>Dec 10 20:56:57 [kernel] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>Dec 10 20:56:57 [kernel] io scheduler noop registered
>Dec 10 20:56:57 [kernel] io scheduler cfq registered (default)
>Dec 10 20:56:57 [kernel] ACPI: AC Adapter [AC] (on-line)
>Dec 10 20:56:57 [kernel] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>Dec 10 20:56:57 [kernel] ACPI: Lid Switch [LID]
>Dec 10 20:56:57 [kernel] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>Dec 10 20:56:57 [kernel] ACPI: Sleep Button [SLPB]
>Dec 10 20:56:57 [kernel] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>Dec 10 20:56:57 [kernel] ACPI: Power Button [PWRF]
>Dec 10 20:56:57 [kernel] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>Dec 10 20:56:57 [kernel] thermal LNXTHERM:00: registered as thermal_zone0
>Dec 10 20:56:57 [kernel] ACPI: Thermal Zone [THRS] (42 C)
>Dec 10 20:56:57 [kernel] thermal LNXTHERM:01: registered as thermal_zone1
>Dec 10 20:56:57 [kernel] ACPI: Thermal Zone [THRC] (73 C)
>Dec 10 20:56:57 [kernel] lp: driver loaded but no devices found
>Dec 10 20:56:57 [kernel] Linux agpgart interface v0.103
>Dec 10 20:56:57 [kernel] [drm] Initialized drm 1.1.0 20060810
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034c00b1)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Checking PCIROM for VBIOS
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: ... appears to be valid
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Using VBIOS from PCIROM
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: BMP BIOS found
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: BMP version 5.41
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.87
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: DCB version 2.2
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: DCB outp 00: 030003f3 00000005
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: DCB outp 01: 01010300 00009c40
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: DCB outp 02: 020203f1 00000303
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF20C
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4A7
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF5ED
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF79D
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF7BA
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF7D7
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF970
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (68900kHz pixel clock)
>Dec 10 20:56:57 [kernel] [TTM] Zone  kernel: Available graphics memory: 767792 kiB
>Dec 10 20:56:57 [kernel] [TTM] Initializing pool allocator
>Dec 10 20:56:57 [kernel] [TTM] Initializing DMA pool allocator
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
>Dec 10 20:56:57 [kernel] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
>Dec 10 20:56:57 [kernel] agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode.
>Dec 10 20:56:57 [kernel] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
>Dec 10 20:56:57 [kernel] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Saving VGA fonts
>Dec 10 20:56:57 [kernel] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>Dec 10 20:56:57 [kernel] [drm] No driver support for vblank timestamp query.
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: c: core 199MHz memory 405MHz
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
>Dec 10 20:56:57 [kernel] ACPI: Battery Slot [BAT0] (battery present)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
>Dec 10 20:56:57 [kernel] [drm] forcing LVDS-1 connector OFF
>Dec 10 20:56:57 [kernel] [drm] forcing TV-1 connector OFF
>Dec 10 20:56:57 [kernel] composite sync not supported
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x49000, bo ffff88005cd32c00
>Dec 10 20:56:57 [kernel] fbcon: nouveaufb (fb0) is primary device
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
>Dec 10 20:56:57 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>Dec 10 20:56:57 [kernel] Console: switching to colour frame buffer device 240x67
>Dec 10 20:56:57 [kernel] fb0: nouveaufb frame buffer device
>Dec 10 20:56:57 [kernel] drm: registered panic notifier
>Dec 10 20:56:57 [kernel] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
>Dec 10 20:56:57 [kernel] parport_pc 00:09: reported by Plug and Play ACPI
>Dec 10 20:56:57 [kernel] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Dec 10 20:56:57 [kernel] lp0: using parport0 (interrupt-driven).
>Dec 10 20:56:57 [kernel] brd: module loaded
>Dec 10 20:56:57 [kernel] loop: module loaded
>Dec 10 20:56:57 [kernel] pata_via 0000:00:11.1: version 0.3.4
>Dec 10 20:56:57 [kernel] pata_via 0000:00:11.1: power state changed by ACPI to D0
>Dec 10 20:56:57 [kernel] pata_via 0000:00:11.1: can't derive routing for PCI INT A
>Dec 10 20:56:57 [kernel] scsi0 : pata_via
>Dec 10 20:56:57 [kernel] scsi1 : pata_via
>Dec 10 20:56:57 [kernel] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c60 irq 14
>Dec 10 20:56:57 [kernel] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c68 irq 15
>Dec 10 20:56:57 [kernel] tun: Universal TUN/TAP device driver, 1.6
>Dec 10 20:56:57 [kernel] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Dec 10 20:56:57 [kernel] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>Dec 10 20:56:57 [kernel] r8169 0000:00:0c.0: PCI: Disallowing DAC for device
>Dec 10 20:56:57 [kernel] r8169 0000:00:0c.0: (unregistered net_device): not PCI Express
>Dec 10 20:56:57 [kernel] r8169 0000:00:0c.0: eth0: RTL8169sb/8110sb at 0xffffc90000036800, 00:0a:e4:a6:4b:c8, XID 10000000 IRQ 22
>Dec 10 20:56:57 [kernel] r8169 0000:00:0c.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
>Dec 10 20:56:57 [kernel] PPP generic driver version 2.4.2
>Dec 10 20:56:57 [kernel] NET: Registered protocol family 24
>Dec 10 20:56:57 [kernel] firewire_ohci 0000:00:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.0: CardBus bridge found [1025:006e]
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.0: Using CSCINT to route CSC interrupts to PCI
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.0: Routing CardBus interrupts to PCI
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.0: TI: mfunc 0x010a1b22, devctl 0x64
>Dec 10 20:56:57 [kernel] ata1: FORCE: cable set to 80c
>Dec 10 20:56:57 [kernel] ata1.00: HPA detected: current 156103606, native 156301488
>Dec 10 20:56:57 [kernel] ata1.00: ATA-7: WDC WD800BEVE-00UYT0, 01.04A01, max UDMA/100
>Dec 10 20:56:57 [kernel] ata1.00: 156103606 sectors, multi 16: LBA48 
>Dec 10 20:56:57 [kernel] ata1.00: configured for UDMA/100
>Dec 10 20:56:57 [kernel] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVE-00 01.0 PQ: 0 ANSI: 5
>Dec 10 20:56:57 [kernel] sd 0:0:0:0: [sda] 156103606 512-byte logical blocks: (79.9 GB/74.4 GiB)
>Dec 10 20:56:57 [kernel] sd 0:0:0:0: [sda] Write Protect is off
>Dec 10 20:56:57 [kernel] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>Dec 10 20:56:57 [kernel] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Dec 10 20:56:57 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0
>Dec 10 20:56:57 [kernel]  sda: sda1 sda2 sda3 sda4
>Dec 10 20:56:57 [kernel] sd 0:0:0:0: [sda] Attached SCSI disk
>Dec 10 20:56:57 [kernel] Refined TSC clocksource calibration: 2201.249 MHz.
>Dec 10 20:56:57 [kernel] Switching to clocksource tsc
>Dec 10 20:56:57 [kernel] ata2.00: ATAPI: PIONEER DVD-RW DVR-K14RA, 1.00, max UDMA/33
>Dec 10 20:56:57 [kernel] ata2.00: configured for UDMA/33
>Dec 10 20:56:57 [kernel] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW DVR-K14RA 1.00 PQ: 0 ANSI: 5
>Dec 10 20:56:57 [kernel] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Dec 10 20:56:57 [kernel] cdrom: Uniform CD-ROM driver Revision: 3.20
>Dec 10 20:56:57 [kernel] sr 1:0:0:0: Attached scsi CD-ROM sr0
>Dec 10 20:56:57 [kernel] sr 1:0:0:0: Attached scsi generic sg1 type 5
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.0: ISA IRQ mask 0x0c78, PCI irq 17
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.0: Socket status: 30000006
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.1: CardBus bridge found [1025:006e]
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.1: Using CSCINT to route CSC interrupts to PCI
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.1: Routing CardBus interrupts to PCI
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.1: TI: mfunc 0x010a1b22, devctl 0x64
>Dec 10 20:56:57 [kernel] firewire_core 0000:00:0b.2: created device fw0: GUID 000ae40507101117, S400
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.1: ISA IRQ mask 0x0c78, PCI irq 18
>Dec 10 20:56:57 [kernel] yenta_cardbus 0000:00:0b.1: Socket status: 30000006
>Dec 10 20:56:57 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Dec 10 20:56:57 [kernel] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: EHCI Host Controller
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: reset hcs_params 0x3206 dbg=0 cc=3 pcc=2 ordered !ppc ports=6
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: reset hcc_params 6872 thresh 7 uframes 256/512/1024
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: reset command 0080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: MWI active
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: supports USB remote wakeup
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: irq 21, io mem 0xc000dc00
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: init command 0010005 (park)=0 ithresh=1 period=512 RUN
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
>Dec 10 20:56:57 [kernel] usb usb1: default language 0x0409
>Dec 10 20:56:57 [kernel] usb usb1: udev 1, busnum 1, minor = 0
>Dec 10 20:56:57 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>Dec 10 20:56:57 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Dec 10 20:56:57 [kernel] usb usb1: Product: EHCI Host Controller
>Dec 10 20:56:57 [kernel] usb usb1: Manufacturer: Linux 3.5.4-hardened-r1 ehci_hcd
>Dec 10 20:56:57 [kernel] usb usb1: SerialNumber: 0000:00:10.3
>Dec 10 20:56:57 [kernel] usb usb1: usb_probe_device
>Dec 10 20:56:57 [kernel] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: USB hub found
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: 6 ports detected
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: standalone hub
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: no power switching (usb 1.0)
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: individual port over-current protection
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: power on to power good time: 20ms
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: local power source is good
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: trying to enable port power on non-switchable hub
>Dec 10 20:56:57 [kernel] uhci_hcd: USB Universal Host Controller Interface driver
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: UHCI Host Controller
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: detected 2 ports
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: Performing full reset
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: supports USB remote wakeup
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
>Dec 10 20:56:57 [kernel] usb usb2: default language 0x0409
>Dec 10 20:56:57 [kernel] usb usb2: udev 1, busnum 2, minor = 128
>Dec 10 20:56:57 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>Dec 10 20:56:57 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Dec 10 20:56:57 [kernel] usb usb2: Product: UHCI Host Controller
>Dec 10 20:56:57 [kernel] usb usb2: Manufacturer: Linux 3.5.4-hardened-r1 uhci_hcd
>Dec 10 20:56:57 [kernel] usb usb2: SerialNumber: 0000:00:10.0
>Dec 10 20:56:57 [kernel] usb usb2: usb_probe_device
>Dec 10 20:56:57 [kernel] usb usb2: configuration #1 chosen from 1 choice
>Dec 10 20:56:57 [kernel] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: USB hub found
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: 2 ports detected
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: standalone hub
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: no power switching (usb 1.0)
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: individual port over-current protection
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: power on to power good time: 2ms
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: local power source is good
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: trying to enable port power on non-switchable hub
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: HS companion for 0000:00:10.0
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: UHCI Host Controller
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: detected 2 ports
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: Performing full reset
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: supports USB remote wakeup
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
>Dec 10 20:56:57 [kernel] usb usb3: default language 0x0409
>Dec 10 20:56:57 [kernel] usb usb3: udev 1, busnum 3, minor = 256
>Dec 10 20:56:57 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>Dec 10 20:56:57 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Dec 10 20:56:57 [kernel] usb usb3: Product: UHCI Host Controller
>Dec 10 20:56:57 [kernel] usb usb3: Manufacturer: Linux 3.5.4-hardened-r1 uhci_hcd
>Dec 10 20:56:57 [kernel] usb usb3: SerialNumber: 0000:00:10.1
>Dec 10 20:56:57 [kernel] usb usb3: usb_probe_device
>Dec 10 20:56:57 [kernel] usb usb3: configuration #1 chosen from 1 choice
>Dec 10 20:56:57 [kernel] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: USB hub found
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: 2 ports detected
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: standalone hub
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: no power switching (usb 1.0)
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: individual port over-current protection
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: power on to power good time: 2ms
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: local power source is good
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: trying to enable port power on non-switchable hub
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: HS companion for 0000:00:10.1
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: UHCI Host Controller
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: detected 2 ports
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: Performing full reset
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: supports USB remote wakeup
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
>Dec 10 20:56:57 [kernel] usb usb4: default language 0x0409
>Dec 10 20:56:57 [kernel] usb usb4: udev 1, busnum 4, minor = 384
>Dec 10 20:56:57 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>Dec 10 20:56:57 [kernel] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Dec 10 20:56:57 [kernel] usb usb4: Product: UHCI Host Controller
>Dec 10 20:56:57 [kernel] usb usb4: Manufacturer: Linux 3.5.4-hardened-r1 uhci_hcd
>Dec 10 20:56:57 [kernel] usb usb4: SerialNumber: 0000:00:10.2
>Dec 10 20:56:57 [kernel] usb usb4: usb_probe_device
>Dec 10 20:56:57 [kernel] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: USB hub found
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: 2 ports detected
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: standalone hub
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: no power switching (usb 1.0)
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: individual port over-current protection
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: power on to power good time: 2ms
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: local power source is good
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: trying to enable port power on non-switchable hub
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: HS companion for 0000:00:10.2
>Dec 10 20:56:57 [kernel] Initializing USB Mass Storage driver...
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver usb-storage
>Dec 10 20:56:57 [kernel] USB Mass Storage support registered.
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver libusual
>Dec 10 20:56:57 [kernel] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>Dec 10 20:56:57 [kernel] i8042: Detected active multiplexing controller, rev 1.1
>Dec 10 20:56:57 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
>Dec 10 20:56:57 [kernel] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>Dec 10 20:56:57 [kernel] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>Dec 10 20:56:57 [kernel] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>Dec 10 20:56:57 [kernel] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>Dec 10 20:56:57 [kernel] mousedev: PS/2 mouse device common for all mice
>Dec 10 20:56:57 [kernel] rtc_cmos 00:02: RTC can wake from S4
>Dec 10 20:56:57 [kernel] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>Dec 10 20:56:57 [kernel] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>Dec 10 20:56:57 [kernel] i2c /dev entries driver
>Dec 10 20:56:57 [kernel] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>Dec 10 20:56:57 [kernel] EDAC MC: Ver: 2.1.0
>Dec 10 20:56:57 [kernel] AMD64 EDAC driver v3.4.0
>Dec 10 20:56:57 [kernel] EDAC amd64: DRAM ECC disabled.
>Dec 10 20:56:57 [kernel] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>Dec 10 20:56:57 [kernel]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>Dec 10 20:56:57 [kernel]  (Note that use of the override may cause unknown side effects.)
>Dec 10 20:56:57 [kernel] cpuidle: using governor ladder
>Dec 10 20:56:57 [kernel] cpuidle: using governor menu
>Dec 10 20:56:57 [kernel] zram: num_devices not specified. Using default: 1
>Dec 10 20:56:57 [kernel] zram: Creating 1 devices ...
>Dec 10 20:56:57 [kernel] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
>                - Last output repeated twice -
>Dec 10 20:56:57 [kernel] snd_via82xx 0000:00:11.5: setting latency timer to 64
>Dec 10 20:56:57 [kernel] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: port 2: status 0501 change 0001
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: port 3: status 0501 change 0001
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: port 4: status 0501 change 0001
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.0: port 2 portsc 009a,00
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: port 1 portsc 009a,00
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.1: port 2 portsc 009a,00
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
>Dec 10 20:56:57 [kernel] uhci_hcd 0000:00:10.2: port 2 portsc 018a,00
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: state 7 ports 6 chg 001c evt 0000
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: port 2 reset complete, port enabled
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
>Dec 10 20:56:57 [kernel] usb 1-2: new high-speed USB device number 2 using ehci_hcd
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: port 2 reset complete, port enabled
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
>Dec 10 20:56:57 [kernel] usb 1-2: default language 0x0409
>Dec 10 20:56:57 [kernel] usb 1-2: udev 2, busnum 1, minor = 1
>Dec 10 20:56:57 [kernel] usb 1-2: New USB device found, idVendor=1058, idProduct=1021
>Dec 10 20:56:57 [kernel] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>Dec 10 20:56:57 [kernel] usb 1-2: Product: Ext HDD 1021
>Dec 10 20:56:57 [kernel] usb 1-2: Manufacturer: Western Digital
>Dec 10 20:56:57 [kernel] usb 1-2: SerialNumber: 5743415A4130373537343239
>Dec 10 20:56:57 [kernel] usb 1-2: usb_probe_device
>Dec 10 20:56:57 [kernel] usb 1-2: configuration #1 chosen from 1 choice
>Dec 10 20:56:57 [kernel] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] usb-storage 1-2:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] usb-storage 1-2:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] scsi2 : usb-storage 1-2:1.0
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: port 3 reset complete, port enabled
>Dec 10 20:56:57 [kernel] usb 1-3: new high-speed USB device number 3 using ehci_hcd
>Dec 10 20:56:57 [kernel] snd_via82xx_modem 0000:00:11.6: power state changed by ACPI to D0
>                - Last output repeated twice -
>Dec 10 20:56:57 [kernel] snd_via82xx_modem 0000:00:11.6: setting latency timer to 64
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: port 3 reset complete, port enabled
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>Dec 10 20:56:57 [kernel] usb 1-3: default language 0x0409
>Dec 10 20:56:57 [kernel] usb 1-3: udev 3, busnum 1, minor = 2
>Dec 10 20:56:57 [kernel] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
>Dec 10 20:56:57 [kernel] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>Dec 10 20:56:57 [kernel] usb 1-3: Product: USB 2.0 Hub
>Dec 10 20:56:57 [kernel] usb 1-3: usb_probe_device
>Dec 10 20:56:57 [kernel] usb 1-3: configuration #1 chosen from 1 choice
>Dec 10 20:56:57 [kernel] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: USB hub found
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: 4 ports detected
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: standalone hub
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: ganged power switching
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: global over-current protection
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: Single TT
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: TT requires at most 8 FS bit times (666 ns)
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: power on to power good time: 100ms
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: local power source is good
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: no over-current condition exists
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: enabling power on all ports
>Dec 10 20:56:57 [kernel] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: port 4 reset complete, port enabled
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: port 1: status 0301 change 0001
>Dec 10 20:56:57 [kernel] usb 1-4: new high-speed USB device number 4 using ehci_hcd
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: port 4 reset complete, port enabled
>Dec 10 20:56:57 [kernel] ehci_hcd 0000:00:10.3: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
>Dec 10 20:56:57 [kernel] usb 1-3: link qh256-0001/ffff88005c887400 start 1 [1/0 us]
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 1 descriptor after configuration
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 6 descriptors after interface
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 1 descriptor after endpoint
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 28 descriptors after interface
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 1 descriptor after endpoint
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 4 descriptors after interface
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 2 descriptors after interface
>Dec 10 20:56:57 [kernel] usb 1-4: skipped 1 descriptor after endpoint
>Dec 10 20:56:57 [kernel] usb 1-4: default language 0x0409
>Dec 10 20:56:57 [kernel] usb 1-4: udev 4, busnum 1, minor = 3
>Dec 10 20:56:57 [kernel] usb 1-4: New USB device found, idVendor=045e, idProduct=0779
>Dec 10 20:56:57 [kernel] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>Dec 10 20:56:57 [kernel] usb 1-4: Product: MicrosoftÂ® LifeCam HD-3000
>Dec 10 20:56:57 [kernel] usb 1-4: Manufacturer: Microsoft
>Dec 10 20:56:57 [kernel] usb 1-4: usb_probe_device
>Dec 10 20:56:57 [kernel] usb 1-4: configuration #1 chosen from 1 choice
>Dec 10 20:56:57 [kernel] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] usb 1-4: adding 1-4:1.1 (config #1, interface 1)
>Dec 10 20:56:57 [kernel] usb 1-4: adding 1-4:1.2 (config #1, interface 2)
>Dec 10 20:56:57 [kernel] usb 1-4: adding 1-4:1.3 (config #1, interface 3)
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: state 7 ports 4 chg 0002 evt 0000
>Dec 10 20:56:57 [kernel] hub 1-3:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>Dec 10 20:56:57 [kernel] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000/0x0
>Dec 10 20:56:57 [kernel] usb 1-3.1: new low-speed USB device number 5 using ehci_hcd
>Dec 10 20:56:57 [kernel] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
>Dec 10 20:56:57 [kernel] usb 1-3.1: skipped 1 descriptor after interface
>                - Last output repeated twice -
>Dec 10 20:56:57 [kernel] usb 1-3.1: default language 0x0409
>Dec 10 20:56:57 [kernel] usb 1-3.1: udev 5, busnum 1, minor = 4
>Dec 10 20:56:57 [kernel] usb 1-3.1: New USB device found, idVendor=0e6a, idProduct=6001
>Dec 10 20:56:57 [kernel] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>Dec 10 20:56:57 [kernel] usb 1-3.1: Product: HID Keyboard Device
>Dec 10 20:56:57 [kernel] usb 1-3.1: usb_probe_device
>Dec 10 20:56:57 [kernel] usb 1-3.1: configuration #1 chosen from 1 choice
>Dec 10 20:56:57 [kernel] usb 1-3.1: adding 1-3.1:1.0 (config #1, interface 0)
>Dec 10 20:56:57 [kernel] usb 1-3.1: adding 1-3.1:1.1 (config #1, interface 1)
>Dec 10 20:56:57 [kernel] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Dec 10 20:56:57 [kernel] ip_tables: (C) 2000-2006 Netfilter Core Team
>Dec 10 20:56:57 [kernel] TCP: cubic registered
>Dec 10 20:56:57 [kernel] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
>Dec 10 20:56:57 [kernel] powernow-k8: fid 0xe (2200 MHz), vid 0x2
>Dec 10 20:56:57 [kernel] powernow-k8: fid 0xc (2000 MHz), vid 0x6
>Dec 10 20:56:57 [kernel] powernow-k8: fid 0xa (1800 MHz), vid 0xa
>Dec 10 20:56:57 [kernel] powernow-k8: fid 0x0 (800 MHz), vid 0x12
>Dec 10 20:56:57 [kernel] ALSA device list:
>Dec 10 20:56:57 [kernel]   #0: VIA 8235 with VIA1612A at 0x1400, irq 22
>Dec 10 20:56:57 [kernel]   #1: VIA 82XX modem at 0x1800, irq 22
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
>Dec 10 20:56:57 [kernel] usb usb2: suspend_rh (auto-stop)
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): write access will be enabled during recovery
>Dec 10 20:56:57 [kernel] Marking TSC unstable due to cpufreq changes
>Dec 10 20:56:57 [kernel] Switching to clocksource hpet
>Dec 10 20:56:57 [kernel] net firewire0: IPv4 over IEEE 1394 on card 0000:00:0b.2
>Dec 10 20:56:57 [kernel] firewire_core 0000:00:0b.2: refreshed device fw0
>Dec 10 20:56:57 [kernel] usb usb3: suspend_rh (auto-stop)
>Dec 10 20:56:57 [kernel] usb usb4: suspend_rh (auto-stop)
>Dec 10 20:56:57 [kernel] scsi 2:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: Attached scsi generic sg2 type 0
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Asking for cache data failed
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Asking for cache data failed
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>Dec 10 20:56:57 [kernel]  sdb: sdb1
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Asking for cache data failed
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>Dec 10 20:56:57 [kernel] sd 2:0:0:0: [sdb] Attached SCSI disk
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): orphan cleanup on readonly fs
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1055302
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1072061
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1052475
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1079376
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 433808
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1076184
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1054988
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1079054
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 652710
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): 9 orphan inodes deleted
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): recovery complete
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>Dec 10 20:56:57 [kernel] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
>Dec 10 20:56:57 [kernel] Freeing unused kernel memory: 404k freed
>Dec 10 20:56:57 [kernel] hub 2-0:1.0: hub_suspend
>Dec 10 20:56:57 [kernel] usb usb2: bus auto-suspend, wakeup 1
>Dec 10 20:56:57 [kernel] usb usb2: suspend_rh
>Dec 10 20:56:57 [kernel] hub 3-0:1.0: hub_suspend
>Dec 10 20:56:57 [kernel] usb usb3: bus auto-suspend, wakeup 1
>Dec 10 20:56:57 [kernel] usb usb3: suspend_rh
>Dec 10 20:56:57 [kernel] hub 4-0:1.0: hub_suspend
>Dec 10 20:56:57 [kernel] usb usb4: bus auto-suspend, wakeup 1
>Dec 10 20:56:57 [kernel] usb usb4: suspend_rh
>Dec 10 20:56:57 [kernel] input: PC Speaker as /devices/platform/pcspkr/input/input6
>Dec 10 20:56:57 [kernel] usbhid 1-3.1:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] usbhid 1-3.1:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] input: HID Keyboard Device as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3.1/1-3.1:1.0/input/input7
>Dec 10 20:56:57 [kernel] usb 1-3.1: link qh8-0e01/ffff88005a56dd80 start 2 [1/2 us]
>Dec 10 20:56:57 [kernel] hid-generic 0003:0E6A:6001.0001: input: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:10.3-3.1/input0
>Dec 10 20:56:57 [kernel] usbhid 1-3.1:1.1: usb_probe_interface
>Dec 10 20:56:57 [kernel] usbhid 1-3.1:1.1: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] input: HID Keyboard Device as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3.1/1-3.1:1.1/input/input8
>Dec 10 20:56:57 [kernel] usb 1-3.1: link qh8-0e01/ffff88005a56de80 start 3 [1/2 us]
>Dec 10 20:56:57 [kernel] hid-generic 0003:0E6A:6001.0002: input: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:10.3-3.1/input1
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver usbhid
>Dec 10 20:56:57 [kernel] usbhid: USB HID core driver
>Dec 10 20:56:57 [kernel] snd-usb-audio 1-4:1.2: usb_probe_interface
>Dec 10 20:56:57 [kernel] snd-usb-audio 1-4:1.2: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] Linux video capture interface: v2.00
>Dec 10 20:56:57 [kernel] usb 1-4: modprobe timed out on ep0in len=0/3
>Dec 10 20:56:57 [kernel] 4:3:1: cannot get freq at ep 0x82
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver snd-usb-audio
>Dec 10 20:56:57 [kernel] uvcvideo 1-4:1.0: usb_probe_interface
>Dec 10 20:56:57 [kernel] uvcvideo 1-4:1.0: usb_probe_interface - got id
>Dec 10 20:56:57 [kernel] uvcvideo: Found UVC 1.00 device MicrosoftÂ® LifeCam HD-3000 (045e:0779)
>Dec 10 20:56:57 [kernel] input: MicrosoftÂ® LifeCam HD-3000 as /devices/pci0000:00/0000:00:10.3/usb1/1-4/1-4:1.0/input/input9
>Dec 10 20:56:57 [kernel] usbcore: registered new interface driver uvcvideo
>Dec 10 20:56:57 [kernel] USB Video Class driver (1.1.1)
>Dec 10 20:56:57 [kernel] usb 1-4: link qh16-0001/ffff88005a524380 start 4 [1/0 us]
>Dec 10 20:56:57 [kernel] usb 1-4: unlink qh16-0001/ffff88005a524380 start 4 [1/0 us]
>Dec 10 20:56:57 [kernel] usb 1-4: usb auto-suspend, wakeup 0
>Dec 10 20:56:57 [kernel] EXT4-fs (sda2): re-mounted. Opts: (null)
>Dec 10 20:56:57 [kernel] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>Dec 10 20:56:57 [kernel] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>Dec 10 20:56:57 [kernel] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>Dec 10 20:57:00 [kernel] composite sync not supported
>Dec 10 20:57:01 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>Dec 10 20:57:01 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
>Dec 10 20:57:01 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>Dec 10 21:30:46 [kernel] composite sync not supported
>                - Last output repeated twice -
>Dec 10 21:33:45 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>Dec 10 21:33:45 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
>Dec 10 21:33:45 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>Dec 10 21:34:00 [kernel] composite sync not supported
>Dec 10 21:34:00 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>Dec 10 21:34:00 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
>Dec 10 21:34:00 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>Dec 10 21:34:32 [kernel] composite sync not supported
>Dec 10 21:34:32 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>Dec 10 21:34:32 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
>Dec 10 21:34:32 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>Dec 10 21:34:39 [kernel] composite sync not supported
>Dec 10 21:34:39 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>Dec 10 21:34:39 [kernel] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
>Dec 10 21:34:39 [kernel] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A

Actions: View

Attachments on bug 58101: 71293 | 71294 | 71295

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.