Attachment 73900 Details for Bug 60050 – Kernel dmesg

Kernel dmesg

dmesg (text/plain), 33.68 KB, created by Julio Merino on 2013-01-30 02:47:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Julio Merino

Created: 2013-01-30 02:47:53 UTC

Size: 33.68 KB

patch

obsolete

>[    0.000000] Allocated 20480 bytes for 32 pacas at c00000000fffb000
>[    0.000000] DART table allocated at: c00000007f000000
>[    0.000000] Using PowerMac machine description
>[    0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
>[    0.000000] Found initrd at 0xc000000001700000:0xc0000000021ed000
>[    0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
>[    0.000000] Mapped at 0xd000080080000000
>[    0.000000] Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000
>[    0.000000] PowerMac motherboard: PowerMac G5
>[    0.000000] DART IOMMU initialized for U3 type chipset
>[    0.000000] bootconsole [udbg0] enabled
>[    0.000000] CPU maps initialized for 1 thread per core
>[    0.000000]  (thread shift is 0)
>[    0.000000] Freed 16384 bytes for unused pacas
>[    0.000000] Starting Linux PPC64 #1 SMP Debian 3.2.35-2
>[    0.000000] -----------------------------------------------------
>[    0.000000] ppc64_pft_size                = 0x0
>[    0.000000] physicalMemorySize            = 0x1a0000000
>[    0.000000] htab_address                  = 0xc000000218000000
>[    0.000000] htab_hash_mask                = 0xfffff
>[    0.000000] -----------------------------------------------------
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.2.0-4-powerpc64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Debian 3.2.35-2
>[    0.000000] [boot]0012 Setup Arch
>[    0.000000] Top of RAM: 0x220000000, Total RAM: 0x1a0000000
>[    0.000000] Memory hole size: 2048MB
>[    0.000000] Found U3-AGP PCI host bridge.  Firmware bus number: 240->255
>[    0.000000] PCI host bridge /pci@0,f0000000  ranges:
>[    0.000000]  MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
>[    0.000000]   IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
>[    0.000000]  MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 
>[    0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
>[    0.000000] Found U3-HT PCI host bridge.  Firmware bus number: 0->239
>[    0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
>[    0.000000] via-pmu: Server Mode is disabled
>[    0.000000] PMU driver v2 initialized for Core99, firmware: 0c
>[    0.000000] nvram: Checking bank 0...
>[    0.000000] nvram: gen0=990, gen1=989
>[    0.000000] nvram: Active bank is: 0
>[    0.000000] nvram: OF partition at 0x410
>[    0.000000] nvram: XP partition at 0x1020
>[    0.000000] nvram: NR partition at 0x1120
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00220000
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x00080000
>[    0.000000]     0: 0x00100000 -> 0x00220000
>[    0.000000] On node 0 totalpages: 1703936
>[    0.000000]   DMA zone: 30464 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 1673472 pages, LIFO batch:31
>[    0.000000] [boot]0015 Setup Done
>[    0.000000] PERCPU: Embedded 13 pages/cpu @c000000000b00000 s20608 r0 d32640 u524288
>[    0.000000] pcpu-alloc: s20608 r0 d32640 u524288 alloc=1*1048576
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1673472
>[    0.000000] Policy zone: DMA
>[    0.000000] Kernel command line: root=UUID=afa8690c-1a57-4dea-a613-9a735efc9799 ro 
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] freeing bootmem node 0
>[    0.000000] Memory: 6531500k/6815744k available (7052k kernel code, 284244k reserved, 1300k data, 1922k bss, 432k init)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000] NR_IRQS:512
>[    0.000000] mpic: Resetting
>[    0.000000] mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 2 CPUs
>[    0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
>[    0.000000] mpic: Initializing for 120 sources
>[    0.000000] mpic: Resetting
>[    0.000000] mpic: Setting up MPIC " MPIC 2   " version 1.2 at f8040000, max 2 CPUs
>[    0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
>[    0.000000] mpic: Initializing for 124 sources
>[    0.000000] time_init: decrementer frequency = 33.333333 MHz
>[    0.000000] time_init: processor frequency   = 2000.000000 MHz
>[    0.000000] clocksource: timebase mult[7800001] shift[22] registered
>[    0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0]
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled, bootconsole disabled
>[    0.002402] pid_max: default: 32768 minimum: 301
>[    0.002617] Security Framework initialized
>[    0.002632] AppArmor: AppArmor disabled by boot time parameter
>[    0.004048] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.012462] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.016205] Mount-cache hash table entries: 256
>[    0.020735] Initializing cgroup subsys cpuacct
>[    0.020766] Initializing cgroup subsys memory
>[    0.021118] Initializing cgroup subsys devices
>[    0.021126] Initializing cgroup subsys freezer
>[    0.021134] Initializing cgroup subsys net_cls
>[    0.021141] Initializing cgroup subsys blkio
>[    0.021159] Initializing cgroup subsys perf_event
>[    0.021912] PowerMac SMP probe found 2 cpus
>[    0.022064] KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
>[    0.022074]  channel 0 bus <multibus>
>[    0.022081]  channel 1 bus <multibus>
>[    0.022117] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
>[    0.022130]  channel 0 bus <multibus>
>[    0.022153] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
>[    0.022164]  channel 1 bus <multibus>
>[    0.022171]  channel 2 bus <multibus>
>[    0.022247] Processor timebase sync using Pulsar i2c clock
>[    0.022256] mpic: requesting IPIs...
>[    0.022291] PPC970/FX/MP performance monitor hardware support registered
>[    0.065982] Brought up 2 CPUs
>[    0.067260] devtmpfs: initialized
>[    0.083535] print_constraints: dummy: 
>[    0.083713] NET: Registered protocol family 16
>[    0.083736] IBM eBus Device Driver
>[    0.084214] CPU Hotplug not supported by firmware - disabling.
>[    0.087169] PCI: Probing PCI hardware
>[    0.087407] pci 0000:f0:0b.0: [106b:0059] type 0 class 0x000600
>[    0.087504] pci 0000:f0:10.0: [10de:0321] type 0 class 0x000300
>[    0.087527] pci 0000:f0:10.0: reg 10: [mem 0x91000000-0x91ffffff]
>[    0.087539] pci 0000:f0:10.0: reg 14: [mem 0x98000000-0x9fffffff pref]
>[    0.087577] pci 0000:f0:10.0: reg 30: [mem 0x90000000-0x9001ffff pref]
>[    0.124445] IOMMU table initialized, virtual merging enabled
>[    0.124787] pci 0001:00:00.0: [106b:0057] type 0 class 0x000600
>[    0.124832] pci 0001:00:01.0: [1022:7450] type 1 class 0x000604
>[    0.124911] pci 0001:00:02.0: [1022:7450] type 1 class 0x000604
>[    0.124983] pci 0001:00:03.0: [106b:0045] type 1 class 0x000604
>[    0.125077] pci 0001:00:04.0: [106b:0046] type 1 class 0x000604
>[    0.125155] pci 0001:00:05.0: [106b:0047] type 1 class 0x000604
>[    0.125234] pci 0001:00:06.0: [106b:0048] type 1 class 0x000604
>[    0.125315] pci 0001:00:07.0: [106b:0049] type 1 class 0x000604
>[    0.125445] pci 0001:00:01.0: PCI bridge to [bus 06-06]
>[    0.125494] pci 0001:00:02.0: PCI bridge to [bus 07-07]
>[    0.125560] pci 0001:01:07.0: [106b:0041] type 0 class 0x00ff00
>[    0.125574] pci 0001:01:07.0: reg 10: [mem 0x80000000-0x8007ffff]
>[    0.125642] pci 0001:01:08.0: [106b:0040] type 0 class 0x000c03
>[    0.125658] pci 0001:01:08.0: reg 10: [mem 0x80081000-0x80081fff]
>[    0.125725] pci 0001:01:09.0: [106b:0040] type 0 class 0x000c03
>[    0.125741] pci 0001:01:09.0: reg 10: [mem 0x80080000-0x80080fff]
>[    0.125804] pci 0001:00:03.0: PCI bridge to [bus 01-01]
>[    0.125819] pci 0001:00:03.0:   bridge window [mem 0x80000000-0x800fffff]
>[    0.125906] pci 0001:02:01.0: [14e4:4320] type 0 class 0x000280
>[    0.125925] pci 0001:02:01.0: reg 10: [mem 0x80104000-0x80105fff]
>[    0.125995] pci 0001:02:01.0: supports D1 D2
>[    0.126000] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.126052] pci 0001:02:0b.0: [1033:0035] type 0 class 0x000c03
>[    0.126072] pci 0001:02:0b.0: reg 10: [mem 0x80102000-0x80102fff]
>[    0.126142] pci 0001:02:0b.0: supports D1 D2
>[    0.126147] pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.126180] pci 0001:02:0b.1: [1033:0035] type 0 class 0x000c03
>[    0.126199] pci 0001:02:0b.1: reg 10: [mem 0x80101000-0x80101fff]
>[    0.126270] pci 0001:02:0b.1: supports D1 D2
>[    0.126275] pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.126307] pci 0001:02:0b.2: [1033:00e0] type 0 class 0x000c03
>[    0.126326] pci 0001:02:0b.2: reg 10: [mem 0x80100000-0x801000ff]
>[    0.126397] pci 0001:02:0b.2: supports D1 D2
>[    0.126402] pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.126426] pci 0001:00:04.0: PCI bridge to [bus 02-02]
>[    0.126442] pci 0001:00:04.0:   bridge window [mem 0x80100000-0x801fffff]
>[    0.126537] pci 0001:03:0d.0: [106b:0043] type 0 class 0x00ff00
>[    0.126551] pci 0001:03:0d.0: reg 10: [mem 0x80204000-0x80207fff]
>[    0.126619] pci 0001:03:0e.0: [106b:0042] type 0 class 0x000c00
>[    0.126637] pci 0001:03:0e.0: reg 10: [mem 0x80200000-0x80200fff]
>[    0.126702] pci 0001:03:0e.0: supports D1 D2
>[    0.126707] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
>[    0.126727] pci 0001:00:05.0: PCI bridge to [bus 03-03]
>[    0.126743] pci 0001:00:05.0:   bridge window [mem 0x80200000-0x802fffff]
>[    0.126817] pci 0001:04:0f.0: [106b:004c] type 0 class 0x000200
>[    0.126832] pci 0001:04:0f.0: reg 10: [mem 0x80400000-0x805fffff]
>[    0.126871] pci 0001:04:0f.0: reg 30: [mem 0x80300000-0x803fffff pref]
>[    0.126896] pci 0001:00:06.0: PCI bridge to [bus 04-04]
>[    0.126912] pci 0001:00:06.0:   bridge window [mem 0x80300000-0x805fffff]
>[    0.126975] pci 0001:05:0c.0: [1166:0240] type 0 class 0x000101
>[    0.126989] pci 0001:05:0c.0: reg 10: [io  0x0000-0x0007]
>[    0.126999] pci 0001:05:0c.0: reg 14: [io  0x0000-0x0003]
>[    0.127009] pci 0001:05:0c.0: reg 18: [io  0x0000-0x0007]
>[    0.127020] pci 0001:05:0c.0: reg 1c: [io  0x0000-0x0003]
>[    0.127030] pci 0001:05:0c.0: reg 20: [io  0x0000-0x000f]
>[    0.127041] pci 0001:05:0c.0: reg 24: [mem 0x80600000-0x80601fff]
>[    0.127081] pci 0001:00:07.0: PCI bridge to [bus 05-05]
>[    0.127096] pci 0001:00:07.0:   bridge window [mem 0x80600000-0x806fffff]
>[    0.128778] PCI: max bus depth: 1 pci_try_num: 2
>[    0.128821] pci 0001:00:01.0: PCI bridge to [bus 06-06]
>[    0.128835] pci 0001:00:02.0: PCI bridge to [bus 07-07]
>[    0.128847] pci 0001:00:03.0: PCI bridge to [bus 01-01]
>[    0.128857] pci 0001:00:03.0:   bridge window [mem 0x80000000-0x800fffff]
>[    0.128869] pci 0001:00:04.0: PCI bridge to [bus 02-02]
>[    0.128878] pci 0001:00:04.0:   bridge window [mem 0x80100000-0x801fffff]
>[    0.128890] pci 0001:00:05.0: PCI bridge to [bus 03-03]
>[    0.128899] pci 0001:00:05.0:   bridge window [mem 0x80200000-0x802fffff]
>[    0.128911] pci 0001:00:06.0: PCI bridge to [bus 04-04]
>[    0.128920] pci 0001:00:06.0:   bridge window [mem 0x80300000-0x805fffff]
>[    0.128932] pci 0001:00:07.0: PCI bridge to [bus 05-05]
>[    0.128942] pci 0001:00:07.0:   bridge window [mem 0x80600000-0x806fffff]
>[    0.128974] pci_bus 0000:f0: resource 0 [io  0x10000-0x80ffff]
>[    0.128979] pci_bus 0000:f0: resource 1 [mem 0xf1000000-0xf1ffffff]
>[    0.128985] pci_bus 0000:f0: resource 2 [mem 0x90000000-0x9fffffff]
>[    0.128990] pci_bus 0001:00: resource 0 [io  0x811000-0xc10fff]
>[    0.128996] pci_bus 0001:00: resource 1 [mem 0xfa000000-0xffffffff]
>[    0.129001] pci_bus 0001:00: resource 2 [mem 0x80000000-0x8fffffff]
>[    0.129007] pci_bus 0001:00: resource 3 [mem 0xa0000000-0xefffffff]
>[    0.129012] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
>[    0.129018] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff]
>[    0.129024] pci_bus 0001:03: resource 1 [mem 0x80200000-0x802fffff]
>[    0.129029] pci_bus 0001:04: resource 1 [mem 0x80300000-0x805fffff]
>[    0.129035] pci_bus 0001:05: resource 1 [mem 0x80600000-0x806fffff]
>[    0.129040] PCI: Probing PCI hardware done
>[    0.131619] opal: Node not found
>[    0.133373] bio: create slab <bio-0> at 0
>[    0.133749] vgaarb: device added: PCI:0000:f0:10.0,decodes=io+mem,owns=mem,locks=none
>[    0.133810] vgaarb: loaded
>[    0.133816] vgaarb: bridge control possible 0000:f0:10.0
>[    0.134136] SCSI subsystem initialized
>[    0.134241] libata version 3.00 loaded.
>[    0.134525] Switching to clocksource timebase
>[    0.142818] NET: Registered protocol family 2
>[    0.143344] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.147135] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    0.154839] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.156332] TCP: Hash tables configured (established 524288 bind 65536)
>[    0.156348] TCP reno registered
>[    0.156398] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.156552] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.156964] NET: Registered protocol family 1
>[    0.157026] pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled
>[    0.157037] pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>[    0.157051] pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled
>[    0.157061] pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>[    0.157076] PCI: CLS mismatch (32 != 64), using 128 bytes
>[    0.157105] pci 0001:01:08.0: enabling device (0000 -> 0002)
>[    0.210597] pci 0001:01:09.0: enabling device (0000 -> 0002)
>[    0.266580] pci 0001:02:0b.0: enabling device (0000 -> 0002)
>[    0.322573] pci 0001:02:0b.1: enabling device (0000 -> 0002)
>[    0.378574] pci 0001:02:0b.2: enabling device (0004 -> 0006)
>[    0.378717] Unpacking initramfs...
>[    0.767933] Freeing initrd memory: 11188k freed
>[    0.822561] Registering G5 CPU frequency driver
>[    0.822577] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
>[    0.822586] Low: 1800 Mhz, High: 2000 Mhz, Cur: 1800 MHz
>[    0.846757] Hypercall H_BEST_ENERGY not supported
>[    0.847244] audit: initializing netlink socket (disabled)
>[    0.847272] type=2000 audit(1359433411.807:1): initialized
>[    0.895648] HugeTLB registered 16 MB page size, pre-allocated 0 pages
>[    0.896287] VFS: Disk quotas dquot_6.5.2
>[    0.896399] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.896574] msgmni has been set to 12780
>[    0.896951] alg: No test for stdrng (krng)
>[    0.897045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.897059] io scheduler noop registered
>[    0.897066] io scheduler deadline registered
>[    0.897117] io scheduler cfq registered (default)
>[    0.897702] Using unsupported 1920x1200 NVDA,Display-B at 98004000, depth=8, pitch=2048
>[    0.939626] Console: switching to colour frame buffer device 240x75
>[    0.981209] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@10/NVDA,Display-B@1
>[    0.981688] vio_register_driver: driver hvc_console registering
>[    0.981716] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    1.030753] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>[    1.030974] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>[    1.034573] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>[    1.034918] Linux agpgart interface v0.103
>[    1.035061] agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset
>[    1.039938] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
>[    1.040233] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
>[    1.040582] MacIO PCI driver attached to K2 chipset
>[    1.041846] pata-pci-macio 0001:03:0d.0: enabling device (0014 -> 0016)
>[    1.054583] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset K2 ATA-6, Apple bus ID 3
>[    1.055225] scsi0 : pata_macio
>[    1.055501] ata1: PATA max UDMA/100 irq 39
>[    1.055855] mousedev: PS/2 mouse device common for all mice
>[    1.056393] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
>[    1.057075] TCP cubic registered
>[    1.057310] NET: Registered protocol family 10
>[    1.058611] Mobile IPv6
>[    1.058691] NET: Registered protocol family 17
>[    1.058824] Registering the dns_resolver key type
>[    1.059000] PM: Registered nosave memory: 000000007f000000 - 0000000080000000
>[    1.059453] PM: Hibernation image not present or could not be loaded.
>[    1.059475] registered taskstats version 1
>[    1.060050] input: PMU as /devices/virtual/input/input0
>[    1.060248] Registered led device: pmu-led::front
>[    1.060558] rtc-generic rtc-generic: setting system clock to 2013-01-29 04:23:33 UTC (1359433413)
>[    1.060818] Initializing network drop monitor service
>[    1.223004] ata1.00: ATAPI: PIONEER DVD-RW  DVR-117D, B705, max UDMA/66
>[    1.230954] ata1.00: configured for UDMA/66
>[    1.243577] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-117D B705 PQ: 0 ANSI: 5
>[    1.243822] ata1.00: K2/Shasta alignment limits applied
>[    1.244557] Freeing unused kernel memory: 432k freed
>[    1.272053] udevd[50]: starting version 175
>[    1.341852] sata_svw 0001:05:0c.0: version 2.3
>[    1.365846] sungem.c:v1.0 David S. Miller <davem@redhat.com>
>[    1.390502] usbcore: registered new interface driver usbfs
>[    1.392059] temperature temperature: PowerMac G5 Thermal control driver 1.3
>[    1.392294] Detected fan controls:
>[    1.392391]   0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
>[    1.392558]   1: RPM fan, id 2, location: DRIVE BAY
>[    1.392695]   2: PWM fan, id 2, location: SLOT,PCI FAN
>[    1.392838]   3: RPM fan, id 3, location: CPU A INTAKE
>[    1.392981]   4: RPM fan, id 4, location: CPU A EXHAUST
>[    1.393082] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
>[    1.393331]   5: RPM fan, id 5, location: CPU B INTAKE
>[    1.393476]   6: RPM fan, id 6, location: CPU B EXHAUST
>[    1.393639] scsi1 : sata_svw
>[    1.395284] gem 0001:04:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:31:85:d4
>[    1.399732] b43-pci-bridge 0001:02:01.0: enabling device (0004 -> 0006)
>[    1.399980] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
>[    1.399990] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
>[    1.399999] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
>[    1.400008] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
>[    1.400017] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
>[    1.400026] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
>[    1.407849] usbcore: registered new interface driver hub
>[    1.408185] ssb: Sonics Silicon Backplane found on PCI device 0001:02:01.0
>[    1.412681] scsi2 : sata_svw
>[    1.427196] usbcore: registered new device driver usb
>[    1.433488] scsi3 : sata_svw
>[    1.434270] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>[    1.434297] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.464504] firewire_ohci: Added fw-ohci device 0001:03:0e.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
>[    1.464579] sr 0:0:0:0: Attached scsi CD-ROM sr0
>[    1.476500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.479955] scsi4 : sata_svw
>[    1.480106] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17
>[    1.480113] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17
>[    1.480120] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17
>[    1.480127] ata5: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17
>[    1.480757] sr 0:0:0:0: Attached scsi generic sg0 type 5
>[    1.542760] ehci_hcd 0001:02:0b.2: EHCI Host Controller
>[    1.552103] ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1
>[    1.567992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.578816] ohci_hcd 0001:01:08.0: OHCI Host Controller
>[    1.588658] ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
>[    1.590605] ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
>[    1.607297] ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
>[    1.610579] ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00
>[    1.610683] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.610688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.610693] usb usb1: Product: EHCI Host Controller
>[    1.610697] usb usb1: Manufacturer: Linux 3.2.0-4-powerpc64 ehci_hcd
>[    1.610701] usb usb1: SerialNumber: 0001:02:0b.2
>[    1.672016] hub 1-0:1.0: USB hub found
>[    1.680998] hub 1-0:1.0: 5 ports detected
>[    1.746437] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.755438] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.764377] usb usb2: Product: OHCI Host Controller
>[    1.773270] usb usb2: Manufacturer: Linux 3.2.0-4-powerpc64 ohci_hcd
>[    1.782242] usb usb2: SerialNumber: 0001:01:08.0
>[    1.791489] hub 2-0:1.0: USB hub found
>[    1.800430] hub 2-0:1.0: 2 ports detected
>[    1.809467] ohci_hcd 0001:01:09.0: OHCI Host Controller
>[    1.818346] ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
>[    1.827238] ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
>[    1.862611] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.879170] ata2.00: ATA-6: ST3160023AS, 3.05, max UDMA/133
>[    1.887982] ata2.00: 312581808 sectors, multi 16: LBA48 
>[    1.910549] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.911152] ata2.00: configured for UDMA/133
>[    1.928326] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.928536] scsi 1:0:0:0: Direct-Access     ATA      ST3160023AS      3.05 PQ: 0 ANSI: 5
>[    1.946510] usb usb3: Product: OHCI Host Controller
>[    1.950827] scsi 1:0:0:0: Attached scsi generic sg1 type 0
>[    1.964560] usb usb3: Manufacturer: Linux 3.2.0-4-powerpc64 ohci_hcd
>[    1.970880] firewire_core: created device fw0: GUID 001124fffe3185d4, S800
>[    1.982637] usb usb3: SerialNumber: 0001:01:09.0
>[    1.991851] hub 3-0:1.0: USB hub found
>[    2.001218] hub 3-0:1.0: 2 ports detected
>[    2.006594] usb 1-1: new high-speed USB device number 2 using ehci_hcd
>[    2.020057] ohci_hcd 0001:02:0b.0: OHCI Host Controller
>[    2.029060] ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4
>[    2.037939] ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
>[    2.122435] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    2.131284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.140123] usb usb4: Product: OHCI Host Controller
>[    2.148916] usb usb4: Manufacturer: Linux 3.2.0-4-powerpc64 ohci_hcd
>[    2.157752] usb usb4: SerialNumber: 0001:02:0b.0
>[    2.165724] usb 1-1: New USB device found, idVendor=05ac, idProduct=1005
>[    2.165731] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.165735] usb 1-1: Product: Keyboard Hub
>[    2.165739] usb 1-1: Manufacturer: Apple Inc.
>[    2.165743] usb 1-1: SerialNumber: 000000000000
>[    2.166249] hub 1-1:1.0: USB hub found
>[    2.166370] hub 1-1:1.0: 3 ports detected
>[    2.229976] hub 4-0:1.0: USB hub found
>[    2.238963] hub 4-0:1.0: 3 ports detected
>[    2.247931] ohci_hcd 0001:02:0b.1: OHCI Host Controller
>[    2.256657] ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5
>[    2.265376] ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
>[    2.286615] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.311624] ata3.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
>[    2.320232] ata3.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 0/32)
>[    2.348843] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    2.357557] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.359114] ata3.00: configured for UDMA/133
>[    2.359331] scsi 2:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
>[    2.359821] scsi 2:0:0:0: Attached scsi generic sg2 type 0
>[    2.392120] usb usb5: Product: OHCI Host Controller
>[    2.400624] usb usb5: Manufacturer: Linux 3.2.0-4-powerpc64 ohci_hcd
>[    2.409126] usb usb5: SerialNumber: 0001:02:0b.1
>[    2.417965] hub 5-0:1.0: USB hub found
>[    2.426586] hub 5-0:1.0: 2 ports detected
>[    2.614700] usb 1-1.2: new low-speed USB device number 5 using ehci_hcd
>[    2.721571] ata4: SATA link down (SStatus 4 SControl 300)
>[    2.737177] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=021d
>[    2.745971] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.754733] usb 1-1.2: Product: Apple Keyboard
>[    2.763437] usb 1-1.2: Manufacturer: Apple Inc.
>[    2.793837] usbcore: registered new interface driver usbhid
>[    2.802570] usbhid: USB HID core driver
>[    2.938572] usb 5-2: new low-speed USB device number 2 using ohci_hcd
>[    3.057570] ata5: SATA link down (SStatus 4 SControl 300)
>[    3.095378] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    3.105003] sd 2:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
>[    3.105110] input: Apple Inc. Apple Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
>[    3.106769] sd 1:0:0:0: [sda] Write Protect is off
>[    3.106776] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.106812] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.141898] apple 0003:05AC:021D.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0001:02:0b.2-1.2/input0
>[    3.151801] sd 2:0:0:0: [sdb] Write Protect is off
>[    3.161447] input: Apple Inc. Apple Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input2
>[    3.161524] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    3.163336] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.173131]  sdb: [mac] sdb1 sdb2 sdb3
>[    3.192175] sd 2:0:0:0: [sdb] Attached SCSI disk
>[    3.192907]  sda: [mac] sda1 sda2 sda3 sda4 sda5
>[    3.212343] apple 0003:05AC:021D.0002: input,hidraw1: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0001:02:0b.2-1.2/input1
>[    3.223992] sd 1:0:0:0: [sda] Attached SCSI disk
>[    3.234421] usb 5-2: New USB device found, idVendor=0461, idProduct=4d81
>[    3.244851] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    3.255248] usb 5-2: Product: USB Optical Mouse
>[    3.277240] input: USB Optical Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2:1.0/input/input3
>[    3.288174] generic-usb 0003:0461:4D81.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0001:02:0b.1-2/input0
>[    3.722975] PM: Starting manual resume from disk
>[    3.733750] PM: Hibernation image partition 8:3 present
>[    3.733754] PM: Looking for hibernation image.
>[    3.734207] PM: Image not found (code -22)
>[    3.734211] PM: Hibernation image not present or could not be loaded.
>[    3.828022] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    5.920422] udevd[313]: starting version 175
>[    6.247920] [drm] Initialized drm 1.1.0 20060810
>[    6.290696] i2c i2c-0: therm_pm72: attach_adapter method is deprecated
>[    6.302064] i2c i2c-0: Please use another way to instantiate your i2c_client
>[    6.341655] PowerMac i2c bus pmu 2 registered
>[    6.353720] i2c i2c-1: therm_pm72: attach_adapter method is deprecated
>[    6.365139] i2c i2c-1: Please use another way to instantiate your i2c_client
>[    6.381578] PowerMac i2c bus pmu 1 registered
>[    6.395595] i2c i2c-2: therm_pm72: attach_adapter method is deprecated
>[    6.407197] i2c i2c-2: Please use another way to instantiate your i2c_client
>[    6.418614] PowerMac i2c bus mac-io 0 registered
>[    6.430113] i2c i2c-3: therm_pm72: attach_adapter method is deprecated
>[    6.441658] i2c i2c-3: Please use another way to instantiate your i2c_client
>[    6.453436] PowerMac i2c bus u3 1 registered
>[    6.465188] i2c i2c-4: therm_pm72: attach_adapter method is deprecated
>[    6.476984] i2c i2c-4: Please use another way to instantiate your i2c_client
>[    6.493341] PowerMac i2c bus u3 0 registered
>[    6.508613] FCU Initialized, RPM fan shift is 3
>[    6.656863] cfg80211: Calling CRDA to update world regulatory domain
>[    6.974978] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
>[    7.014576] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
>[    7.014601] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>[    7.021509] [drm] nouveau 0000:f0:10.0: Detected an NV30 generation card (0x034100b1)
>[    7.035202] checking generic (98004000 258000) vs hw (98000000 8000000)
>[    7.035211] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver
>[    7.048066] Console: switching to colour dummy device 80x25
>[    7.050112] [drm] nouveau 0000:f0:10.0: OF bios successfully copied (2403 bytes)
>[    7.050217] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PRAMIN
>[    7.058599] b43legacy-phy0 debug: Radio initialized
>[    7.088748] [drm] nouveau 0000:f0:10.0: ... BIOS checksum invalid
>[    7.088759] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PROM
>[    7.159498] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[    7.160610] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
>[    7.224231] [drm] nouveau 0000:f0:10.0: ... BIOS checksum invalid
>[    7.224241] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PCIROM
>[    7.224392] [drm] nouveau 0000:f0:10.0: ... BIOS signature not found
>[    7.224402] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from ACPI
>[    7.224411] [drm] nouveau 0000:f0:10.0: ... BIOS signature not found
>[    7.224420] [drm] nouveau 0000:f0:10.0: Using BIOS image from PRAMIN
>[    7.264186] [drm] nouveau 0000:f0:10.0: BMP BIOS found
>[    7.264195] [drm] nouveau 0000:f0:10.0: BMP version 5.39
>[    7.264204] [drm] nouveau 0000:f0:10.0: Bios version 04.34.20.19
>[    7.264218] [drm] nouveau 0000:f0:10.0: Found Display Configuration Block version 2.2
>[    7.264234] [drm] nouveau 0000:f0:10.0: Raw DCB entry 0: 01100102 00000000
>[    7.264244] [drm] nouveau 0000:f0:10.0: Raw DCB entry 1: 01000100 000088b8
>[    7.264253] [drm] nouveau 0000:f0:10.0: Raw DCB entry 2: 02110212 11b00000
>[    7.264263] [drm] nouveau 0000:f0:10.0: Raw DCB entry 3: 02010210 11b088b8
>[    7.264272] [drm] nouveau 0000:f0:10.0: Raw DCB entry 4: 02010211 11b00003
>[    7.264853] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 0 at offset 0x020A
>[    7.266907] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 1 at offset 0x0457
>[    7.266926] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 2 at offset 0x059D
>[    7.266978] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 3 at offset 0x0723
>[    7.266992] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 4 at offset 0x0740
>[    7.267005] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 5 at offset 0x075D
>[    7.270676] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 6 at offset 0x08E2
>[    7.270826] i2c i2c-5: therm_pm72: attach_adapter method is deprecated
>[    7.270836] i2c i2c-5: Please use another way to instantiate your i2c_client
>[    7.380834] [drm] nouveau 0000:f0:10.0: Detected monitoring device: max6646
>[    7.380854] [drm] nouveau 0000:f0:10.0: 0 available performance level(s)
>[    7.380891] [drm] nouveau 0000:f0:10.0: c: core 300MHz memory 553MHz
>[    7.395780] [TTM] Zone  kernel: Available graphics memory: 3272070 kiB.
>[    7.395799] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[    7.395812] [TTM] Initializing pool allocator.
>[    7.395871] [drm] nouveau 0000:f0:10.0: Detected 64MiB VRAM
>[    7.398639] [drm] nouveau 0000:f0:10.0: 64 MiB GART (aperture)
>[    7.409634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    7.409650] [drm] No driver support for vblank timestamp query.
>[    7.409690] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on TV encoder (output 4)
>[    7.429657] i2c i2c-6: therm_pm72: attach_adapter method is deprecated
>[    7.429672] i2c i2c-6: Please use another way to instantiate your i2c_client
>[    7.466694] i2c i2c-7: therm_pm72: attach_adapter method is deprecated
>[    7.466710] i2c i2c-7: Please use another way to instantiate your i2c_client
>[    7.598733] [drm] nouveau 0000:f0:10.0: allocated 1920x1200 fb: 0x49000, bo c00000021179d000
>[    7.609391] Console: switching to colour frame buffer device 240x75
>[    7.612309] fb0: nouveaufb frame buffer device
>[    7.612322] drm: registered panic notifier
>[    7.612346] [drm] Initialized nouveau 1.0.0 20120316 for 0000:f0:10.0 on minor 0
>[    8.599126] Adding 11718744k swap on /dev/sda3.  Priority:-1 extents:1 across:11718744k 
>[    8.631741] EXT4-fs (sda4): re-mounted. Opts: (null)
>[    8.927431] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
>[    9.147270] loop: module loaded
>[    9.358770] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
>[   10.376294] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
>[   11.546903] sungem_phy: PHY ID: 2062e0, addr: 1
>[   11.547162] gem 0001:04:0f.0: eth0: Found BCM5421-K2 PHY
>[   11.548860] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   11.712665] RPC: Registered named UNIX socket transport module.
>[   11.712703] RPC: Registered udp transport module.
>[   11.712716] RPC: Registered tcp transport module.
>[   11.712729] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   11.760191] FS-Cache: Loaded
>[   11.851544] FS-Cache: Netfs 'nfs' registered for caching
>[   11.875774] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   15.158715] gem 0001:04:0f.0: eth0: Link is up at 1000 Mbps, full-duplex
>[   15.166241] gem 0001:04:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
>[   15.175291] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   25.526560] eth0: no IPv6 routers present

Actions: View

Attachments on bug 60050: 73899 | 73900 | 73901 | 73902 | 73961

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.