Attachment 81617 Details for Bug 66301 – dmesg: S4 cause call trace sporadically

dmesg: S4 cause call trace sporadically

call_trace (text/plain), 121.38 KB, created by shui yangwei on 2013-06-28 07:26:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: shui yangwei

Created: 2013-06-28 07:26:42 UTC

Size: 121.38 KB

patch

obsolete

>[    3.381179] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.381180] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[    3.381181] [drm:intel_dump_pipe_config], ips: 0
>[    3.381182] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    3.381185] [drm:ironlake_edp_backlight_off], 
>[    3.588092] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    3.588094] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    3.588095] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    3.588098] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    3.588101] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[    4.435943] [drm:intel_update_fbc], no output, disabling
>[    4.435960] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[    4.435962] [drm:intel_update_fbc], no output, disabling
>[    4.435966] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900]
>[    4.435967] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[    4.435974] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    4.435976] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    4.435979] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[    4.435984] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    4.435986] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[    4.637127] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    4.637129] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    4.637132] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[    4.637136] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    4.637138] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[    4.729270] [drm:intel_enable_rc6], Haswell: only RC6 available
>[    4.729271] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    4.731235] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[    4.846349] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    4.846355] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[    4.898373] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    4.898953] [drm:intel_dp_start_link_train], clock recovery OK
>[    4.898954] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    4.899831] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    4.951431] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.003485] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.003487] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    5.003639] [drm:ironlake_edp_backlight_on], 
>[    5.005491] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[    5.021504] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    5.021506] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    5.021508] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    5.021510] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    5.021511] [drm:check_crtc_state], [CRTC:3]
>[    5.021514] [drm:check_crtc_state], [CRTC:5]
>[    5.021516] [drm:check_crtc_state], [CRTC:7]
>[    5.021519] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.021520] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[    5.021522] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    5.021524] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.021528] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.021529] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[    5.021531] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.021533] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.021534] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[    5.021536] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    5.021538] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains
>[    5.021540] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
>[    5.021541] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
>[    5.021543] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[    5.021545] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[    5.021546] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    5.021547] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[    5.021549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.021550] [drm:intel_dump_pipe_config], requested mode:
>[    5.021553] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.021554] [drm:intel_dump_pipe_config], adjusted mode:
>[    5.021557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.021558] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    5.021560] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[    5.021561] [drm:intel_dump_pipe_config], ips: 0
>[    5.021564] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B
>[    5.023681] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20
>[    5.023714] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[    5.023716] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    5.023722] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[    5.023724] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[    5.023725] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI
>[    5.023726] [drm:intel_ddi_mode_set], HDMI audio: write eld information
>[    5.023728] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19]
>[    5.023729] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
>[    5.023730] [drm:haswell_write_eld], HDMI audio: enable codec
>[    5.075556] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.075558] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x      40
>[    5.075559] [drm:haswell_write_eld], HDMI audio: eld vld status=0x      50
>[    5.075561] [drm:haswell_write_eld], HDMI audio: audio conf: 0x  70fa60
>[    5.075562] [drm:haswell_write_eld], ELD on pipe B
>[    5.075565] [drm:haswell_write_eld], port num:0
>[    5.075566] [drm:haswell_write_eld], ELD size 8
>[    5.127608] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.179660] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.179662] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[    5.181667] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    5.181671] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1]
>[    5.181673] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    5.181674] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    5.181676] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    5.181678] [drm:check_crtc_state], [CRTC:3]
>[    5.181681] [drm:check_crtc_state], [CRTC:5]
>[    5.181685] [drm:check_crtc_state], [CRTC:7]
>[    5.181687] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    5.181690] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.181691] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.181711] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.181713] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.181714] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.181716] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.181718] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.181720] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.188644] Console: switching to colour frame buffer device 200x56
>[    5.188647] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.188649] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.188651] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.188652] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.188654] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.188656] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.195954] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.196008] i915 0000:00:02.0: registered panic notifier
>[    5.196475] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    5.196790] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
>[    5.196881] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015a6ad230), AE_NOT_FOUND (20130328/psparse-537)
>[    5.197256] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
>[    5.197397] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input6
>[    5.203026] [drm:asle_set_backlight], bclp = 0x800000ff
>[    5.203031] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[    5.203034] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[    5.203100] [drm:asle_set_backlight], bclp = 0x80000000
>[    5.203102] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[    5.203104] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    5.203302] acpi device:58: registered as cooling_device8
>[    5.203377] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    5.203470] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
>[    5.203611] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    5.206588] dracut: Starting plymouth daemon
>[    5.213189] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.213192] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.213193] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.213195] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.213196] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.213197] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220000] [drm:i915_driver_open], 
>[    5.220011] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.220014] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.220016] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220018] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.220020] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.220022] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220024] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    5.220025] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.220027] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220032] [drm:i915_driver_open], 
>[    5.220036] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.220038] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.220039] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220041] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.220043] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.220044] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220045] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    5.220047] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.220048] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.220052] [drm:i915_driver_open], 
>[    5.220092] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[3]
>[    5.220095] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[3]
>[    5.220100] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    5.220102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[    5.220110] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    5.220113] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[    5.220114] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[    5.220117] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    5.223415] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    5.223419] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    5.223422] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    5.223424] [drm:intel_crt_detect], CRT not detected via hotplug
>[    5.223582] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    5.223584] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.223586] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.223587] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.223919] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.223920] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.223922] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.223923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    5.223926] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    5.223928] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    5.223930] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    5.223931] [drm:intel_crt_detect], CRT not detected via hotplug
>[    5.224083] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    5.224084] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.224086] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.224087] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.224418] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.224419] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.224420] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.224422] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    5.224425] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    5.224426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[    5.227351] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.231605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.235606] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.236719] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[    5.236725] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    5.236727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[    5.239624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.243613] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.247617] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.248730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[    5.248735] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[    5.248738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[    5.273615] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[    5.298511] [drm:drm_edid_to_eld], ELD monitor HP 2309
>[    5.298513] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    5.298516] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
>[    5.298529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes :
>[    5.298531] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.298535] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[    5.298539] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    5.298542] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    5.298546] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    5.298549] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[    5.298553] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    5.298557] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[    5.298560] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    5.298564] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    5.298567] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    5.298571] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[    5.298574] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.298578] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.298581] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.298585] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    5.298591] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[    5.310108] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.310112] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.310113] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.310116] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.310118] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.310119] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.364517] Linux video capture interface: v2.00
>[    5.366863] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b374)
>[    5.371031] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    5.371058] ALSA sound/pci/hda/hda_intel.c:3787 Haswell must build in CONFIG_SND_HDA_I915
>[    5.371059] ALSA sound/pci/hda/hda_intel.c:3817 Error request power-well from i915
>[    5.371249] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
>[    5.371375] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.371565] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[    5.371605] ACPI: AC Adapter [AC0] (on-line)
>[    5.372191] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    5.372947] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x8
>[    5.376458] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input9
>[    5.377099] usbcore: registered new interface driver uvcvideo
>[    5.377155] USB Video Class driver (1.1.1)
>[    5.377673] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x8
>[    5.378381] wmi: Mapper loaded
>[    5.378781] acer_wmi: Acer Laptop ACPI-WMI Extras
>[    5.378830] acer_wmi: Function bitmap for Communication Button: 0x801
>[    5.379378] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    5.379384] ACPI: Battery Slot [BAT0] (battery present)
>[    5.381387] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x8
>[    5.383440] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x8
>[    5.384497] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x8
>[    5.384984] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x8
>[    5.385975] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x8
>[    5.386305] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x8
>[    5.388663] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    5.394459] acer_wmi: Brightness must be controlled by acpi video driver
>[    5.394476] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.394480] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.394481] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.394485] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.394486] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.394487] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.396017] ALSA sound/pci/hda/patch_realtek.c:414 SKU: Nid=0x1d sku_cfg=0x40589d2d
>[    5.396018] ALSA sound/pci/hda/patch_realtek.c:416 SKU: port_connectivity=0x1
>[    5.396019] ALSA sound/pci/hda/patch_realtek.c:417 SKU: enable_pcbeep=0x1
>[    5.396020] ALSA sound/pci/hda/patch_realtek.c:418 SKU: check_sum=0x00000008
>[    5.396020] ALSA sound/pci/hda/patch_realtek.c:419 SKU: customization=0x0000009d
>[    5.396021] ALSA sound/pci/hda/patch_realtek.c:420 SKU: external_amp=0x5
>[    5.396022] ALSA sound/pci/hda/patch_realtek.c:421 SKU: platform_type=0x1
>[    5.396022] ALSA sound/pci/hda/patch_realtek.c:422 SKU: swap=0x0
>[    5.396023] ALSA sound/pci/hda/patch_realtek.c:423 SKU: override=0x1
>[    5.396186] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    5.396187] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    5.396188] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    5.396189] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    5.396189] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    5.396191] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x1b
>[    5.396192] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[    5.396193] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x40589d2d for NID 0x1d
>[    5.396194] ALSA sound/pci/hda/patch_realtek.c:502 realtek: Enabling init ASM_ID=0x9d2d CODEC_ID=10ec0282
>[    5.400772] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20130328/utaddress-251)
>[    5.402115] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20130328/utaddress-251)
>[    5.403201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.407457] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
>[    5.407537] input: Acer WMI hotkeys as /devices/virtual/input/input10
>[    5.408237] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
>[    5.415791] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPXX 1 (20130328/utaddress-251)
>[    5.417106] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \PMIX 2 (20130328/utaddress-251)
>[    5.418345] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 3 (20130328/utaddress-251)
>[    5.419593] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 4 (20130328/utaddress-251)
>[    5.420826] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 5 (20130328/utaddress-251)
>[    5.422098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.423393] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPXX 1 (20130328/utaddress-251)
>[    5.424721] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \PMIX 2 (20130328/utaddress-251)
>[    5.426046] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 3 (20130328/utaddress-251)
>[    5.427348] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 4 (20130328/utaddress-251)
>[    5.428624] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 5 (20130328/utaddress-251)
>[    5.429883] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 6 (20130328/utaddress-251)
>[    5.431173] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.432462] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    5.434089] iTCO_vendor_support: vendor-support=0
>[    5.435547] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    5.436800] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    5.438239] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    5.706922] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    5.846307] dracut: Checking ext4: /dev/sda2
>[    5.847633] dracut: issuing e2fsck -a  /dev/sda2
>[    6.028088] dracut: /dev/sda2: clean, 2211937/14131200 files, 37810248/56510208 blocks
>[    6.029646] dracut: Remounting /dev/sda2 with -o ro
>[    6.065805] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    6.160728] dracut: Mounted root filesystem /dev/sda2
>[    6.255038] device-mapper: uevent: version 1.0.3
>[    6.256467] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
>[    6.428701] dracut: Switching root
>[    8.519602] udevd[2565]: starting version 182
>[   10.050439] EXT4-fs (sda2): re-mounted. Opts: (null)
>[   11.619949] Adding 8388604k swap on /dev/sda1.  Priority:0 extents:1 across:8388604k 
>[   12.714761] watchdog (3668): /proc/3668/oom_adj is deprecated, please use /proc/3668/oom_score_adj instead.
>[   13.404481] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[   13.404486] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   13.404489] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[   13.404491] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[   13.404493] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   13.404495] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[   13.404496] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   13.404498] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   13.404499] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[   17.747299] tg3 0000:0e:00.0: irq 48 for MSI/MSI-X
>[   18.530137] tg3 0000:0e:00.0 p3p1: Link is down
>[   19.535039] tg3 0000:0e:00.0 p3p1: Link is up at 100 Mbps, full duplex
>[   19.536006] tg3 0000:0e:00.0 p3p1: Flow control is off for TX and off for RX
>[   36.045734] NET: Registered protocol family 10
>[  351.448011] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[  351.448017] PM: Marking nosave pages: [mem 0x86cb0000-0x880affff]
>[  351.448092] PM: Marking nosave pages: [mem 0x8c6bf000-0x8cffefff]
>[  351.448126] PM: Marking nosave pages: [mem 0x8d000000-0xffffffff]
>[  351.449277] PM: Basic memory bitmaps created
>[  351.449278] PM: Syncing filesystems ... done.
>[  351.817227] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  351.827874] PM: Preallocating image memory... done (allocated 95026 pages)
>[  351.907776] PM: Allocated 380104 kbytes in 0.07 seconds (5430.05 MB/s)
>[  351.907808] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  351.918930] Suspending console(s) (use no_console_suspend to debug)
>[  351.919778] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[  351.919799] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  351.919803] [drm:ironlake_edp_backlight_off], 
>[  352.143088] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  352.143095] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  352.143097] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  352.143100] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  352.143103] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  352.979932] [drm:intel_update_fbc], plane not 0, disabling compression
>[  353.011964] [drm:intel_update_fbc], no output, disabling
>[  353.012047] PM: freeze of devices complete after 1091.991 msecs
>[  353.012159] PM: late freeze of devices complete after 0.110 msecs
>[  353.012656] PM: noirq freeze of devices complete after 0.494 msecs
>[  353.012989] ACPI: Preparing to enter system sleep state S4
>[  353.013192] PM: Saving platform NVS memory
>[  353.013701] Disabling non-boot CPUs ...
>[  353.014961] smpboot: CPU 1 is now offline
>[  353.016431] smpboot: CPU 2 is now offline
>[  353.017934] smpboot: CPU 3 is now offline
>[  353.019288] smpboot: CPU 4 is now offline
>[  353.019752] Broke affinity for irq 44
>[  353.020768] smpboot: CPU 5 is now offline
>[  353.022103] smpboot: CPU 6 is now offline
>[  353.022552] Broke affinity for irq 45
>[  353.023573] smpboot: CPU 7 is now offline
>[  353.023823] PM: Creating hibernation image:
>[  353.084350] PM: Need to copy 92813 pages
>[  353.084351] PM: Normal pages needed: 92813 + 1024, available pages: 867689
>[  353.024695] PM: Restoring platform NVS memory
>[  353.025129] Enabling non-boot CPUs ...
>[  353.025156] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  353.039362] CPU1 is up
>[  353.039376] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  353.053710] CPU2 is up
>[  353.053725] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  353.068062] CPU3 is up
>[  353.068075] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[  353.082431] CPU4 is up
>[  353.082443] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[  353.096790] CPU5 is up
>[  353.096802] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[  353.111178] CPU6 is up
>[  353.111190] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[  353.125590] CPU7 is up
>[  353.132458] ACPI: Waking up from system sleep state S4
>[  353.146630] pci 0000:01:00.0: power state changed by ACPI to D0
>[  353.146876] PM: noirq restore of devices complete after 11.453 msecs
>[  353.146935] PM: early restore of devices complete after 0.041 msecs
>[  353.170622] i915 0000:00:02.0: setting latency timer to 64
>[  353.170636] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[  353.170638] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[  353.170650] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[  353.170654] usb usb3: root hub lost power or was reset
>[  353.170656] usb usb4: root hub lost power or was reset
>[  353.170661] ahci 0000:00:1f.2: setting latency timer to 64
>[  353.170665] usb usb1: root hub lost power or was reset
>[  353.170684] usb usb2: root hub lost power or was reset
>[  353.170779] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  353.170855] xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
>[  353.172516] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cfa9018
>[  353.172529] [drm:intel_opregion_setup], Public ACPI methods supported
>[  353.172530] [drm:intel_opregion_setup], SWSCI supported
>[  353.172531] [drm:intel_opregion_setup], ASLE supported
>[  353.172614] tg3 0000:0e:00.0 p3p1: Link is down
>[  353.173080] [drm:init_status_page], render ring hws offset: 0x00000000
>[  353.173178] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[  353.173187] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[  353.173297] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[  353.173371] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[  353.173750] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
>[  353.173844] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
>[  353.173909] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
>[  353.173983] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
>[  353.174041] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
>[  353.174199] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[  353.174202] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[  353.174204] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[  353.174216] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
>[  353.174218] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
>[  353.174220] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[  353.174223] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: disabled
>[  353.174234] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[  353.174236] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-1] hw state readout: disabled
>[  353.174238] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled
>[  353.174258] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[  353.174259] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  353.174261] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  353.174262] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  353.174263] [drm:intel_dump_pipe_config], requested mode:
>[  353.174266] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  353.174266] [drm:intel_dump_pipe_config], adjusted mode:
>[  353.174273] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  353.174274] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  353.174276] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  353.174276] [drm:intel_dump_pipe_config], ips: 0
>[  353.174286] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[  353.174287] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  353.174288] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  353.174289] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  353.174290] [drm:intel_dump_pipe_config], requested mode:
>[  353.174293] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  353.174293] [drm:intel_dump_pipe_config], adjusted mode:
>[  353.174296] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  353.174297] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  353.174298] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  353.174299] [drm:intel_dump_pipe_config], ips: 0
>[  353.174302] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[  353.174303] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[  353.174304] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  353.174306] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  353.174306] [drm:intel_dump_pipe_config], requested mode:
>[  353.174309] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  353.174309] [drm:intel_dump_pipe_config], adjusted mode:
>[  353.174312] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  353.174313] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  353.174314] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  353.174315] [drm:intel_dump_pipe_config], ips: 0
>[  353.174317] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  353.174320] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[  353.174321] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  353.174323] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 101700KHz
>[  353.174325] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  353.174326] [drm:intel_dp_compute_config], DP link bw required 183060 available 216000
>[  353.174328] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  353.174330] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  353.174331] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  353.174332] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  353.174333] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  353.174334] [drm:intel_dump_pipe_config], requested mode:
>[  353.174337] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  353.174338] [drm:intel_dump_pipe_config], adjusted mode:
>[  353.174341] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  353.174342] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  353.174343] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  353.174344] [drm:intel_dump_pipe_config], ips: 0
>[  353.174401] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  353.174407] [drm:intel_update_fbc], no output, disabling
>[  353.174422] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900]
>[  353.174423] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  353.174443] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  353.174447] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  353.174451] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  353.174461] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  353.174462] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[  353.174571] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[  353.174593] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[  353.177045] dpm_run_callback(): pnp_bus_resume+0x0/0x6c returns -19
>[  353.177046] PM: Device 00:07 failed to restore: error -19
>[  353.375635] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  353.375637] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  353.375641] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[  353.375644] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  353.375647] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[  353.475739] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  353.477740] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  353.480229] ata3.00: configured for UDMA/133
>[  353.481271] ata1.00: configured for UDMA/133
>[  353.481309] sd 0:0:0:0: [sda] Starting disk
>[  353.516715] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  353.516717] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  353.536848] usb 3-5: reset high-speed USB device number 2 using xhci_hcd
>[  353.584841] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[  353.584846] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  353.593916] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155938f80
>[  353.636878] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  353.637455] [drm:intel_dp_start_link_train], clock recovery OK
>[  353.637457] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  353.638335] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  353.689911] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  353.703959] usb 3-10: reset full-speed USB device number 3 using xhci_hcd
>[  353.715456] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae9180
>[  353.715458] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae9200
>[  353.715460] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae91c0
>[  353.715462] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a543c0
>[  353.715463] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a54380
>[  353.716104] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  353.716106] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  353.741964] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  353.741966] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  353.742129] [drm:ironlake_edp_backlight_on], 
>[  353.743973] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[  353.743977] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[  353.759983] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  353.759986] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains
>[  353.759989] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
>[  353.759991] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
>[  353.759992] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  353.759994] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[  353.759995] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  353.759996] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  353.759998] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  353.759999] [drm:intel_dump_pipe_config], requested mode:
>[  353.760003] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  353.760004] [drm:intel_dump_pipe_config], adjusted mode:
>[  353.760007] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  353.760009] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  353.760010] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  353.760011] [drm:intel_dump_pipe_config], ips: 0
>[  353.760014] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1
>[  353.760016] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B
>[  353.762133] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20
>[  353.762166] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  353.762169] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  353.762175] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[  353.762177] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[  353.762178] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI
>[  353.762179] [drm:intel_ddi_mode_set], HDMI audio: write eld information
>[  353.762181] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19]
>[  353.762183] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
>[  353.762184] [drm:haswell_write_eld], HDMI audio: enable codec
>[  353.814037] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  353.814039] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x      40
>[  353.814040] [drm:haswell_write_eld], HDMI audio: eld vld status=0x      50
>[  353.814042] [drm:haswell_write_eld], HDMI audio: audio conf: 0x  70fa60
>[  353.814043] [drm:haswell_write_eld], ELD on pipe B
>[  353.817050] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[  353.866088] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  353.916315] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  353.916316] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  353.918140] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  353.918141] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[  353.936160] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  353.936165] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  353.936168] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1]
>[  353.936170] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  353.936172] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  353.936174] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  353.936175] [drm:check_crtc_state], [CRTC:3]
>[  353.936179] [drm:check_crtc_state], [CRTC:5]
>[  353.936182] [drm:check_crtc_state], [CRTC:7]
>[  353.936187] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[  353.936191] [drm:intel_resume_hotplug], running encoder hotplug functions
>[  353.936634] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00
>[  353.936926] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[  353.946172] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  353.946174] [drm:intel_crt_detect], CRT not detected via hotplug
>[  353.946330] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  353.946332] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  353.946333] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  353.946335] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  353.946666] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  353.946667] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  353.946668] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  353.946671] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected
>[  353.949568] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  353.954067] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  353.958070] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  353.959183] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from unknown to disconnected
>[  353.984066] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[  353.984069] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from unknown to connected
>[  353.984087] [drm:drm_fb_helper_hotplug_event], 
>[  353.984089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[  353.984096] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  353.984099] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[  353.984103] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  353.984104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[  353.984107] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  353.984108] [drm:intel_crt_detect], CRT not detected via hotplug
>[  353.984261] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  353.984262] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  353.984263] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  353.984265] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  353.984595] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  353.984596] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  353.984598] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  353.984599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[  353.984601] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[  353.987498] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  353.992104] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  353.996108] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  353.997219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[  353.997221] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[  354.022117] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[  354.033268] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[  354.047023] [drm:drm_edid_to_eld], ELD monitor HP 2309
>[  354.047026] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[  354.047027] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
>[  354.047040] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[  354.047042] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[  354.047045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes :
>[  354.047048] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  354.047051] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[  354.047054] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[  354.047057] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  354.047060] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[  354.047063] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  354.047066] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[  354.047069] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[  354.047072] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  354.047075] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  354.047078] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[  354.047081] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[  354.047084] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  354.047087] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[  354.047090] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  354.047091] [drm:drm_setup_crtcs], 
>[  354.047093] [drm:drm_enable_connectors], connector 12 enabled? yes
>[  354.047094] [drm:drm_enable_connectors], connector 9 enabled? no
>[  354.047095] [drm:drm_enable_connectors], connector 20 enabled? no
>[  354.047097] [drm:drm_enable_connectors], connector 21 enabled? yes
>[  354.047098] [drm:drm_target_preferred], looking for cmdline mode on connector 12
>[  354.047100] [drm:drm_target_preferred], looking for preferred mode on connector 12
>[  354.047101] [drm:drm_target_preferred], found mode 1600x900
>[  354.047103] [drm:drm_target_preferred], looking for cmdline mode on connector 21
>[  354.047104] [drm:drm_target_preferred], looking for preferred mode on connector 21
>[  354.047105] [drm:drm_target_preferred], found mode 1920x1080
>[  354.047106] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  354.047110] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[  354.047112] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5
>[  354.047115] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  354.047118] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  354.047120] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  354.047122] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  354.047124] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  354.047126] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  354.047127] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  354.047129] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  354.047131] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  354.048381] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  354.048383] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  354.048384] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  354.048386] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  354.048387] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  354.048388] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  354.117784] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  354.117786] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  354.250488] PM: restore of devices complete after 1078.809 msecs
>[  354.713049] PM: Image restored successfully.
>[  354.713052] Restarting tasks ... done.
>[  354.714657] PM: Basic memory bitmaps freed
>[  354.714664] video LNXVIDEO:00: Restoring backlight state
>[  354.715636] video LNXVIDEO:01: Restoring backlight state
>[  355.069344] [drm:intel_enable_rc6], Haswell: only RC6 available
>[  355.069348] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  355.074331] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[  383.549563] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[  383.549568] PM: Marking nosave pages: [mem 0x86cb0000-0x880affff]
>[  383.549641] PM: Marking nosave pages: [mem 0x8c6bf000-0x8cffefff]
>[  383.549675] PM: Marking nosave pages: [mem 0x8d000000-0xffffffff]
>[  383.550832] PM: Basic memory bitmaps created
>[  383.550833] PM: Syncing filesystems ... done.
>[  384.759486] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  384.771154] PM: Preallocating image memory... done (allocated 93881 pages)
>[  384.851321] PM: Allocated 375524 kbytes in 0.07 seconds (5364.62 MB/s)
>[  384.852291] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  384.864289] Suspending console(s) (use no_console_suspend to debug)
>[  384.865598] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[  384.865638] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  384.865644] [drm:ironlake_edp_backlight_off], 
>[  385.098441] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  385.098448] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  385.098450] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  385.098453] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  385.098456] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  385.858192] [drm:intel_update_fbc], plane not 0, disabling compression
>[  385.884220] [drm:intel_update_fbc], no output, disabling
>[  385.884313] PM: freeze of devices complete after 1018.014 msecs
>[  385.884423] PM: late freeze of devices complete after 0.108 msecs
>[  385.884916] PM: noirq freeze of devices complete after 0.491 msecs
>[  385.885241] ACPI: Preparing to enter system sleep state S4
>[  385.885443] PM: Saving platform NVS memory
>[  385.885966] Disabling non-boot CPUs ...
>[  385.887513] smpboot: CPU 1 is now offline
>[  385.888845] smpboot: CPU 2 is now offline
>[  385.890322] smpboot: CPU 3 is now offline
>[  385.891620] smpboot: CPU 4 is now offline
>[  385.893087] smpboot: CPU 5 is now offline
>[  385.894367] smpboot: CPU 6 is now offline
>[  385.894810] Broke affinity for irq 23
>[  385.895837] smpboot: CPU 7 is now offline
>[  385.896059] PM: Creating hibernation image:
>[  385.957050] PM: Need to copy 92758 pages
>[  385.957051] PM: Normal pages needed: 92758 + 1024, available pages: 867745
>[  385.896924] PM: Restoring platform NVS memory
>[  385.897368] Enabling non-boot CPUs ...
>[  385.897394] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  385.911707] CPU1 is up
>[  385.911721] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  385.926062] CPU2 is up
>[  385.926075] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  385.940413] CPU3 is up
>[  385.940427] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[  385.954775] CPU4 is up
>[  385.954787] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[  385.969134] CPU5 is up
>[  385.969147] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[  385.983518] CPU6 is up
>[  385.983531] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[  385.997935] CPU7 is up
>[  386.004814] ACPI: Waking up from system sleep state S4
>[  386.017879] pci 0000:01:00.0: power state changed by ACPI to D0
>[  386.018124] PM: noirq restore of devices complete after 11.460 msecs
>[  386.018183] PM: early restore of devices complete after 0.041 msecs
>[  386.041717] i915 0000:00:02.0: setting latency timer to 64
>[  386.041729] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[  386.041735] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[  386.041745] usb usb3: root hub lost power or was reset
>[  386.041747] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[  386.041748] usb usb4: root hub lost power or was reset
>[  386.041757] ahci 0000:00:1f.2: setting latency timer to 64
>[  386.041759] usb usb1: root hub lost power or was reset
>[  386.041779] usb usb2: root hub lost power or was reset
>[  386.041872] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  386.041956] xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
>[  386.043602] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cfa9018
>[  386.043615] [drm:intel_opregion_setup], Public ACPI methods supported
>[  386.043615] [drm:intel_opregion_setup], SWSCI supported
>[  386.043616] [drm:intel_opregion_setup], ASLE supported
>[  386.044155] [drm:init_status_page], render ring hws offset: 0x00000000
>[  386.044256] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[  386.044273] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[  386.044352] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[  386.044443] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[  386.044710] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
>[  386.044777] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
>[  386.044915] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
>[  386.045027] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
>[  386.045093] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
>[  386.045266] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[  386.045269] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[  386.045272] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[  386.045282] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
>[  386.045284] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
>[  386.045287] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[  386.045292] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: disabled
>[  386.045301] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[  386.045303] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-1] hw state readout: disabled
>[  386.045306] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled
>[  386.045310] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[  386.045311] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  386.045312] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  386.045314] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  386.045314] [drm:intel_dump_pipe_config], requested mode:
>[  386.045317] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  386.045319] [drm:intel_dump_pipe_config], adjusted mode:
>[  386.045321] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  386.045323] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  386.045324] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  386.045325] [drm:intel_dump_pipe_config], ips: 0
>[  386.045328] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[  386.045329] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  386.045330] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  386.045331] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  386.045332] [drm:intel_dump_pipe_config], requested mode:
>[  386.045334] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  386.045335] [drm:intel_dump_pipe_config], adjusted mode:
>[  386.045338] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  386.045339] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  386.045340] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  386.045341] [drm:intel_dump_pipe_config], ips: 0
>[  386.045344] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[  386.045345] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[  386.045346] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  386.045348] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  386.045348] [drm:intel_dump_pipe_config], requested mode:
>[  386.045350] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  386.045351] [drm:intel_dump_pipe_config], adjusted mode:
>[  386.045353] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  386.045355] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  386.045356] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  386.045357] [drm:intel_dump_pipe_config], ips: 0
>[  386.045359] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  386.045362] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[  386.045363] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  386.045366] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 101700KHz
>[  386.045368] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  386.045369] [drm:intel_dp_compute_config], DP link bw required 183060 available 216000
>[  386.045371] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  386.045372] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  386.045373] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  386.045374] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  386.045376] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  386.045377] [drm:intel_dump_pipe_config], requested mode:
>[  386.045380] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  386.045381] [drm:intel_dump_pipe_config], adjusted mode:
>[  386.045383] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  386.045384] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  386.045386] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  386.045387] [drm:intel_dump_pipe_config], ips: 0
>[  386.045462] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  386.045469] [drm:intel_update_fbc], no output, disabling
>[  386.045484] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900]
>[  386.045485] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  386.045506] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  386.045509] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  386.045513] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  386.045524] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  386.045525] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[  386.045649] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[  386.045685] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[  386.048221] dpm_run_callback(): pnp_bus_resume+0x0/0x6c returns -19
>[  386.048222] PM: Device 00:07 failed to restore: error -19
>[  386.245879] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  386.245881] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  386.245884] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[  386.245888] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  386.245890] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[  386.346989] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  386.348961] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  386.350509] ata1.00: configured for UDMA/133
>[  386.350604] sd 0:0:0:0: [sda] Starting disk
>[  386.355359] ata3.00: configured for UDMA/133
>[  386.391356] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  386.391358] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  386.408104] usb 3-10: reset full-speed USB device number 3 using xhci_hcd
>[  386.419667] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae9180
>[  386.419669] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae9200
>[  386.419670] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae91c0
>[  386.419672] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a543c0
>[  386.419673] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a54380
>[  386.455088] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[  386.455094] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  386.516116] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.526124] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.536133] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.546143] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.556153] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.556155] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.568166] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.572201] usb 3-5: reset high-speed USB device number 2 using xhci_hcd
>[  386.578176] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.588187] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.591350] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  386.591352] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  386.598196] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.608206] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.608207] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.620218] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.629229] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155938f80
>[  386.630228] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.640238] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.650248] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.660258] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.660259] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.672270] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.682280] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.688298] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[  386.692290] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.702301] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.712310] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.712311] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.712316] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  386.724322] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.734332] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.744342] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.754352] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.764362] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.764363] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.776374] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.786384] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.791558] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  386.791559] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  386.796396] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.806404] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.816414] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.816416] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.816420] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  386.828426] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.838436] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.848446] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.858456] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.868466] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.868467] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.880478] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.890488] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.900498] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.904513] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[  386.910509] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.920518] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  386.920520] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  386.972571] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  386.991762] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  386.991764] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  387.024645] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  387.024647] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  387.034634] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.044643] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.054653] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.064663] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.074672] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.074674] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa01500e1
>[  387.074678] [drm:ironlake_edp_backlight_on], 
>[  387.076680] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[  387.092694] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  387.092696] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains
>[  387.092699] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
>[  387.092701] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
>[  387.092702] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  387.092704] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[  387.092705] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  387.092707] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  387.092709] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  387.092710] [drm:intel_dump_pipe_config], requested mode:
>[  387.092713] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  387.092714] [drm:intel_dump_pipe_config], adjusted mode:
>[  387.092717] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  387.092719] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  387.092720] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  387.092722] [drm:intel_dump_pipe_config], ips: 0
>[  387.092725] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1
>[  387.092726] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B
>[  387.094841] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20
>[  387.094873] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  387.094876] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  387.094882] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[  387.094883] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[  387.094885] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI
>[  387.094886] [drm:intel_ddi_mode_set], HDMI audio: write eld information
>[  387.094888] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19]
>[  387.094889] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
>[  387.094890] [drm:haswell_write_eld], HDMI audio: enable codec
>[  387.102718] [drm:intel_enable_rc6], Haswell: only RC6 available
>[  387.102720] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  387.106706] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[  387.146746] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  387.146748] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x      40
>[  387.146750] [drm:haswell_write_eld], HDMI audio: eld vld status=0x      50
>[  387.146752] [drm:haswell_write_eld], HDMI audio: audio conf: 0x  70fa60
>[  387.146753] [drm:haswell_write_eld], ELD on pipe B
>[  387.192006] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  387.192007] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  387.198798] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  387.250850] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  387.250851] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[  387.268870] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  387.268874] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  387.268878] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1]
>[  387.268880] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  387.268882] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  387.268884] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  387.268886] [drm:check_crtc_state], [CRTC:3]
>[  387.268889] [drm:check_crtc_state], [CRTC:5]
>[  387.268892] [drm:check_crtc_state], [CRTC:7]
>[  387.268897] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[  387.268902] [drm:intel_resume_hotplug], running encoder hotplug functions
>[  387.278878] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.288887] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.298897] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.308907] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.318917] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.318918] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa07500e1
>[  387.330929] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.340939] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.350949] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.360959] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.370970] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.370971] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa07500e1
>[  387.382981] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.392168] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  387.392170] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  387.392992] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.403001] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.413011] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.423021] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.423022] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa07500e1
>[  387.425026] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[  387.435037] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  387.435038] [drm:intel_crt_detect], CRT not detected via hotplug
>[  387.436041] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  387.436043] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  387.436044] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  387.436045] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  387.436376] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  387.436378] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  387.436379] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  387.436381] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected
>[  387.446045] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.456054] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.466064] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.476074] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.486084] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.486086] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa145004a
>[  387.498096] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.508106] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.518116] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.528126] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.538136] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.538138] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa145004a
>[  387.550149] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.560159] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.570169] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.580178] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.590189] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.590191] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa145004a
>[  387.592193] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from unknown to disconnected
>[  387.603204] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.614215] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.625226] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.636237] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.647248] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.647251] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from unknown to disconnected
>[  387.647268] [drm:drm_fb_helper_hotplug_event], 
>[  387.647270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[  387.647280] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  387.647282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[  387.647286] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  387.647288] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[  387.647290] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  387.647291] [drm:intel_crt_detect], CRT not detected via hotplug
>[  387.648254] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  387.648255] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  387.648256] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  387.648258] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  387.648588] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  387.648589] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  387.648591] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  387.648592] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[  387.648594] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[  387.658257] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.668267] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.678277] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.688287] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.698297] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.698300] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa145004a
>[  387.710309] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.720319] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.730329] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.740339] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.750349] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.750351] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa145004a
>[  387.762361] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.772371] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.782381] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.792391] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.802402] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
>[  387.802404] [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch not done status 0xa145004a
>[  387.804405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[  387.804406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[  387.815416] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.826427] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.837439] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.848449] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.859460] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] timed out waiting for idle
>[  387.859463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] disconnected
>[  387.859466] [drm:drm_setup_crtcs], 
>[  387.859468] [drm:drm_enable_connectors], connector 12 enabled? yes
>[  387.859469] [drm:drm_enable_connectors], connector 9 enabled? no
>[  387.859471] [drm:drm_enable_connectors], connector 20 enabled? no
>[  387.859472] [drm:drm_enable_connectors], connector 21 enabled? no
>[  387.859474] [drm:drm_target_preferred], looking for cmdline mode on connector 12
>[  387.859475] [drm:drm_target_preferred], looking for preferred mode on connector 12
>[  387.859476] [drm:drm_target_preferred], found mode 1600x900
>[  387.859478] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  387.859480] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[  387.859483] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  387.859487] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  387.859489] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  387.859491] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[  387.859493] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [NOCRTC]
>[  387.859494] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  387.859495] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  387.859497] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  387.859499] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  387.885495] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  387.885496] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1
>[  387.885500] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  387.885502] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  387.885504] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  387.885506] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  387.885507] [drm:check_crtc_state], [CRTC:3]
>[  387.885510] [drm:check_crtc_state], [CRTC:5]
>[  387.885512] [drm:check_crtc_state], [CRTC:7]
>[  387.885514] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  387.885516] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  387.886728] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  387.886730] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  387.895296] PM: restore of devices complete after 1851.751 msecs
>[  388.224609] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input12
>[  388.228768] PM: Image restored successfully.
>[  388.228771] Restarting tasks ... done.
>[  388.230143] PM: Basic memory bitmaps freed
>[  388.230154] video LNXVIDEO:00: Restoring backlight state
>[  388.230813] video LNXVIDEO:01: Restoring backlight state
>[  406.278999] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[  406.279004] PM: Marking nosave pages: [mem 0x86cb0000-0x880affff]
>[  406.279076] PM: Marking nosave pages: [mem 0x8c6bf000-0x8cffefff]
>[  406.279110] PM: Marking nosave pages: [mem 0x8d000000-0xffffffff]
>[  406.280466] PM: Basic memory bitmaps created
>[  406.280467] PM: Syncing filesystems ... done.
>[  406.866449] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  406.878247] PM: Preallocating image memory... done (allocated 94314 pages)
>[  406.958072] PM: Allocated 377256 kbytes in 0.07 seconds (5389.37 MB/s)
>[  406.958769] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  406.970392] Suspending console(s) (use no_console_suspend to debug)
>[  406.971483] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  406.971484] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[  406.971505] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  406.971509] [drm:ironlake_edp_backlight_off], 
>[  407.201872] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  407.201879] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  407.201881] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  407.201884] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  407.201887] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  408.005703] [drm:intel_update_fbc], no output, disabling
>[  408.005799] PM: freeze of devices complete after 1033.653 msecs
>[  408.005911] PM: late freeze of devices complete after 0.109 msecs
>[  408.006405] PM: noirq freeze of devices complete after 0.492 msecs
>[  408.006735] ACPI: Preparing to enter system sleep state S4
>[  408.006932] PM: Saving platform NVS memory
>[  408.007466] Disabling non-boot CPUs ...
>[  408.008729] smpboot: CPU 1 is now offline
>[  408.010185] smpboot: CPU 2 is now offline
>[  408.011683] smpboot: CPU 3 is now offline
>[  408.013024] smpboot: CPU 4 is now offline
>[  408.014496] smpboot: CPU 5 is now offline
>[  408.015784] smpboot: CPU 6 is now offline
>[  408.017378] smpboot: CPU 7 is now offline
>[  408.017610] PM: Creating hibernation image:
>[  408.078627] PM: Need to copy 92962 pages
>[  408.078629] PM: Normal pages needed: 92962 + 1024, available pages: 867537
>[  408.018468] PM: Restoring platform NVS memory
>[  408.018916] Enabling non-boot CPUs ...
>[  408.018943] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  408.033128] CPU1 is up
>[  408.033141] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  408.047489] CPU2 is up
>[  408.047502] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  408.061841] CPU3 is up
>[  408.061854] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[  408.076199] CPU4 is up
>[  408.076212] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[  408.090558] CPU5 is up
>[  408.090572] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[  408.104945] CPU6 is up
>[  408.104958] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[  408.119359] CPU7 is up
>[  408.126249] ACPI: Waking up from system sleep state S4
>[  408.139365] pci 0000:01:00.0: power state changed by ACPI to D0
>[  408.139612] PM: noirq restore of devices complete after 11.464 msecs
>[  408.139671] PM: early restore of devices complete after 0.041 msecs
>[  408.163273] i915 0000:00:02.0: setting latency timer to 64
>[  408.163286] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[  408.163290] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[  408.163302] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[  408.163303] usb usb3: root hub lost power or was reset
>[  408.163304] usb usb4: root hub lost power or was reset
>[  408.163309] usb usb1: root hub lost power or was reset
>[  408.163325] usb usb2: root hub lost power or was reset
>[  408.163384] ahci 0000:00:1f.2: setting latency timer to 64
>[  408.163451] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  408.163508] xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
>[  408.165008] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cfa9018
>[  408.165021] [drm:intel_opregion_setup], Public ACPI methods supported
>[  408.165022] [drm:intel_opregion_setup], SWSCI supported
>[  408.165023] [drm:intel_opregion_setup], ASLE supported
>[  408.165497] [drm:init_status_page], render ring hws offset: 0x00000000
>[  408.165577] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[  408.165593] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[  408.165670] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[  408.165749] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[  408.165997] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
>[  408.166067] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
>[  408.166119] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
>[  408.166197] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
>[  408.166240] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
>[  408.166394] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[  408.166405] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[  408.166407] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[  408.166411] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
>[  408.166414] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
>[  408.166423] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[  408.166426] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: disabled
>[  408.166428] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[  408.166430] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-1] hw state readout: disabled
>[  408.166432] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled
>[  408.166443] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[  408.166444] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  408.166446] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  408.166448] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  408.166449] [drm:intel_dump_pipe_config], requested mode:
>[  408.166451] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  408.166452] [drm:intel_dump_pipe_config], adjusted mode:
>[  408.166454] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  408.166456] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  408.166457] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  408.166459] [drm:intel_dump_pipe_config], ips: 0
>[  408.166462] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[  408.166463] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  408.166465] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  408.166466] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  408.166467] [drm:intel_dump_pipe_config], requested mode:
>[  408.166470] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  408.166470] [drm:intel_dump_pipe_config], adjusted mode:
>[  408.166472] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  408.166474] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  408.166475] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  408.166476] [drm:intel_dump_pipe_config], ips: 0
>[  408.166480] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[  408.166481] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[  408.166482] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  408.166484] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  408.166485] [drm:intel_dump_pipe_config], requested mode:
>[  408.166487] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  408.166488] [drm:intel_dump_pipe_config], adjusted mode:
>[  408.166490] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  408.166491] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  408.166492] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  408.166493] [drm:intel_dump_pipe_config], ips: 0
>[  408.166497] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  408.166499] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[  408.166501] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  408.166503] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 101700KHz
>[  408.166505] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  408.166506] [drm:intel_dp_compute_config], DP link bw required 183060 available 216000
>[  408.166508] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  408.166509] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  408.166510] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  408.166511] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  408.166513] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  408.166514] [drm:intel_dump_pipe_config], requested mode:
>[  408.166521] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  408.166522] [drm:intel_dump_pipe_config], adjusted mode:
>[  408.166525] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  408.166527] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  408.166528] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  408.166529] [drm:intel_dump_pipe_config], ips: 0
>[  408.166606] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  408.166619] [drm:intel_update_fbc], no output, disabling
>[  408.166643] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900]
>[  408.166644] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  408.166696] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  408.166700] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  408.166704] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  408.166721] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  408.166723] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[  408.167217] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[  408.167224] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[  408.170626] dpm_run_callback(): pnp_bus_resume+0x0/0x6c returns -19
>[  408.170627] PM: Device 00:07 failed to restore: error -19
>[  408.367363] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  408.367365] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  408.367368] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[  408.367372] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  408.367375] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[  408.469471] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  408.471462] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  408.472984] ata1.00: configured for UDMA/133
>[  408.473056] sd 0:0:0:0: [sda] Starting disk
>[  408.475936] ata3.00: configured for UDMA/133
>[  408.511882] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  408.511884] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  408.529583] usb 3-5: reset high-speed USB device number 2 using xhci_hcd
>[  408.576571] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[  408.576577] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  408.586455] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155938f80
>[  408.628611] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  408.629189] [drm:intel_dp_start_link_train], clock recovery OK
>[  408.629190] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  408.630069] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  408.681663] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  408.696712] usb 3-10: reset full-speed USB device number 3 using xhci_hcd
>[  408.708195] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae9180
>[  408.708196] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae9200
>[  408.708198] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155ae91c0
>[  408.708199] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a543c0
>[  408.708200] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a54380
>[  408.712303] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  408.712305] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  408.733715] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  408.733717] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  408.733890] [drm:ironlake_edp_backlight_on], 
>[  408.735704] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[  408.751715] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  408.751718] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  408.751721] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  408.751724] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  408.751726] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  408.751727] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  408.751729] [drm:check_crtc_state], [CRTC:3]
>[  408.751732] [drm:check_crtc_state], [CRTC:5]
>[  408.751734] [drm:check_crtc_state], [CRTC:7]
>[  408.751739] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[  408.751744] [drm:intel_resume_hotplug], running encoder hotplug functions
>[  408.752185] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00
>[  408.752478] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[  408.761724] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  408.761726] [drm:intel_crt_detect], CRT not detected via hotplug
>[  408.761880] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  408.761882] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  408.761883] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  408.761885] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  408.762216] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  408.762217] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  408.762218] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  408.762221] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected
>[  408.765118] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  408.769620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  408.773626] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  408.774736] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from unknown to disconnected
>[  408.799617] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[  408.799619] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from unknown to connected
>[  408.799636] [drm:drm_fb_helper_hotplug_event], 
>[  408.799638] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[  408.799646] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  408.799649] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[  408.799652] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  408.799654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[  408.799656] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  408.799657] [drm:intel_crt_detect], CRT not detected via hotplug
>[  408.799810] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  408.799811] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  408.799812] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  408.799814] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  408.800145] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  408.800146] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  408.800147] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  408.800149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[  408.800151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[  408.803048] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  408.807658] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  408.809781] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[  408.811661] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  408.812774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[  408.812776] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[  408.837666] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[  408.862567] [drm:drm_edid_to_eld], ELD monitor HP 2309
>[  408.862570] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[  408.862572] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
>[  408.862582] [drm:drm_mode_debug_printmodeline], Modeline 33:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[  408.862583] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[  408.862587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes :
>[  408.862590] [drm:drm_mode_debug_printmodeline], Modeline 44:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  408.862593] [drm:drm_mode_debug_printmodeline], Modeline 45:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[  408.862596] [drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[  408.862599] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  408.862602] [drm:drm_mode_debug_printmodeline], Modeline 32:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[  408.862606] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  408.862609] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[  408.862612] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[  408.862615] [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  408.862618] [drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  408.862621] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[  408.862624] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[  408.862627] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  408.862629] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[  408.862632] [drm:drm_mode_debug_printmodeline], Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  408.862634] [drm:drm_setup_crtcs], 
>[  408.862635] [drm:drm_enable_connectors], connector 12 enabled? yes
>[  408.862637] [drm:drm_enable_connectors], connector 9 enabled? no
>[  408.862638] [drm:drm_enable_connectors], connector 20 enabled? no
>[  408.862639] [drm:drm_enable_connectors], connector 21 enabled? yes
>[  408.862641] [drm:drm_target_preferred], looking for cmdline mode on connector 12
>[  408.862642] [drm:drm_target_preferred], looking for preferred mode on connector 12
>[  408.862643] [drm:drm_target_preferred], found mode 1600x900
>[  408.862645] [drm:drm_target_preferred], looking for cmdline mode on connector 21
>[  408.862646] [drm:drm_target_preferred], looking for preferred mode on connector 21
>[  408.862647] [drm:drm_target_preferred], found mode 1920x1080
>[  408.862648] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  408.862652] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[  408.862654] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5
>[  408.862657] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  408.862659] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  408.862662] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  408.862663] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[  408.862664] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  408.862666] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  408.862668] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  408.862669] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  408.862671] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  408.862673] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains
>[  408.862676] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
>[  408.862677] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
>[  408.862679] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  408.862680] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[  408.862682] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  408.862683] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  408.862685] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  408.862686] [drm:intel_dump_pipe_config], requested mode:
>[  408.862689] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  408.862690] [drm:intel_dump_pipe_config], adjusted mode:
>[  408.862693] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  408.862695] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  408.862696] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  408.862698] [drm:intel_dump_pipe_config], ips: 0
>[  408.862701] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B
>[  408.862701] ------------[ cut here ]------------
>[  408.862720] WARNING: at drivers/gpu/drm/i915/intel_ddi.c:686 intel_ddi_pll_mode_set+0x174/0x7cf [i915]()
>[  408.862721] WRPLL already enabled
>[  408.862740] Modules linked in: ipv6 dm_mod iTCO_wdt iTCO_vendor_support joydev snd_hda_codec_realtek acer_wmi acpi_cpufreq coretemp kvm_intel kvm microcode pcspkr serio_raw i2c_i801 lpc_ich mfd_core uvcvideo snd_hda_intel videobuf2_vmalloc snd_hda_codec videobuf2_memops snd_hwdep videobuf2_core snd_pcm snd_page_alloc videodev snd_timer snd soundcore battery sparse_keymap ac rfkill wmi i915 video button drm_kms_helper drm broadcom mperf freq_table
>[  408.862742] CPU: 0 PID: 5369 Comm: kworker/u16:34 Not tainted 3.10.0-rc2_drm-intel-next-queued_919991_20130628_+ #4671
>[  408.862743] Hardware name: Acer Aspire V3-772/VA70_HW, BIOS V1.04 04/19/2013
>[  408.862748] Workqueue: events_unbound async_run_entry_fn
>[  408.862751]  ffffffff816de142 0000000000000000 ffffffff8102c67d 0000000000000046
>[  408.862753]  ffff88015970b978 ffff88015518b000 ffff8801552d8000 ffff88015518b000
>[  408.862755]  0000000000000006 0000000000000001 ffffffff8102c72d ffffffffa00c85e2
>[  408.862756] Call Trace:
>[  408.862761]  [<ffffffff816de142>] ? dump_stack+0xd/0x17
>[  408.862765]  [<ffffffff8102c67d>] ? warn_slowpath_common+0x5f/0x77
>[  408.862767]  [<ffffffff8102c72d>] ? warn_slowpath_fmt+0x45/0x4a
>[  408.862770]  [<ffffffff8102ce6e>] ? log_store+0x16e/0x1b3
>[  408.862779]  [<ffffffffa00940fd>] ? intel_ddi_pll_mode_set+0x174/0x7cf [i915]
>[  408.862781]  [<ffffffff81048da5>] ? up+0xb/0x36
>[  408.862783]  [<ffffffff8102cfbd>] ? console_trylock+0x28/0x47
>[  408.862790]  [<ffffffffa006b5e3>] ? ivybridge_enable_vblank+0x16/0x5b [i915]
>[  408.862798]  [<ffffffffa0016ebd>] ? drm_vblank_get+0x20f/0x220 [drm]
>[  408.862807]  [<ffffffffa008a775>] ? haswell_crtc_mode_set+0x3c/0x2da [i915]
>[  408.862816]  [<ffffffffa008c828>] ? __intel_set_mode+0xd30/0xf4e [i915]
>[  408.862818]  [<ffffffff8102cfbd>] ? console_trylock+0x28/0x47
>[  408.862830]  [<ffffffffa008dad5>] ? intel_set_mode+0xd/0x27 [i915]
>[  408.862838]  [<ffffffffa008e072>] ? intel_crtc_set_config+0x583/0x748 [i915]
>[  408.862845]  [<ffffffffa001db78>] ? drm_mode_create+0x30/0x46 [drm]
>[  408.862852]  [<ffffffffa001ecc1>] ? drm_mode_set_config_internal+0x19/0x40 [drm]
>[  408.862856]  [<ffffffffa0007b8a>] ? drm_fb_helper_set_par+0x54/0x9a [drm_kms_helper]
>[  408.862859]  [<ffffffffa0007c78>] ? drm_fb_helper_hotplug_event+0xa8/0xae [drm_kms_helper]
>[  408.862865]  [<ffffffffa0065282>] ? __i915_drm_thaw+0x11d/0x188 [i915]
>[  408.862870]  [<ffffffff812ce576>] ? pci_pm_default_resume+0x29/0x29
>[  408.862875]  [<ffffffffa00655ed>] ? i915_resume+0x7d/0x9f [i915]
>[  408.862879]  [<ffffffff812ce5ca>] ? pci_pm_restore+0x54/0x7b
>[  408.862883]  [<ffffffff813534bf>] ? dpm_run_callback.isra.11+0x24/0x52
>[  408.862885]  [<ffffffff8135400f>] ? device_resume+0x109/0x14a
>[  408.862888]  [<ffffffff81354064>] ? async_resume+0x14/0x38
>[  408.862890]  [<ffffffff81049aef>] ? async_run_entry_fn+0x55/0x10b
>[  408.862893]  [<ffffffff8104075c>] ? process_one_work+0x1c5/0x2df
>[  408.862896]  [<ffffffff81040cb3>] ? worker_thread+0x1c7/0x2bc
>[  408.862899]  [<ffffffff81040aec>] ? rescuer_thread+0x251/0x251
>[  408.862902]  [<ffffffff810451ca>] ? kthread+0xad/0xb5
>[  408.862904]  [<ffffffff8104511d>] ? kthread_freezable_should_stop+0x40/0x40
>[  408.862907]  [<ffffffff816e7d6c>] ? ret_from_fork+0x7c/0xb0
>[  408.862909]  [<ffffffff8104511d>] ? kthread_freezable_should_stop+0x40/0x40
>[  408.862910] ---[ end trace d21ec2e6c974e02e ]---
>[  408.865025] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20
>[  408.865058] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  408.865061] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  408.865068] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[  408.865069] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[  408.865070] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI
>[  408.865071] [drm:intel_ddi_mode_set], HDMI audio: write eld information
>[  408.865074] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19]
>[  408.865075] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
>[  408.865076] [drm:haswell_write_eld], HDMI audio: enable codec
>[  408.912040] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  408.912041] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  408.916876] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  408.916878] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x      40
>[  408.916880] [drm:haswell_write_eld], HDMI audio: eld vld status=0x      50
>[  408.916881] [drm:haswell_write_eld], HDMI audio: audio conf: 0x  70fa60
>[  408.916882] [drm:haswell_write_eld], ELD on pipe B
>[  408.968951] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  409.021003] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  409.021004] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[  409.026021] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[  409.039036] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  409.039039] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1]
>[  409.039041] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  409.039042] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  409.039044] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  409.039045] [drm:check_crtc_state], [CRTC:3]
>[  409.039048] [drm:check_crtc_state], [CRTC:5]
>[  409.039051] [drm:check_crtc_state], [CRTC:7]
>[  409.039053] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  409.039055] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  409.039056] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  409.040377] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  409.040379] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  409.040380] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  409.040382] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  409.040383] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  409.040385] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  409.112306] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  409.112308] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  409.243042] PM: restore of devices complete after 1078.712 msecs
>[  409.312477] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  409.312479] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  409.512706] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  409.513892] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  409.707783] PM: Image restored successfully.
>[  409.707786] Restarting tasks ... done.
>[  409.709804] PM: Basic memory bitmaps freed
>[  409.709811] video LNXVIDEO:00: Restoring backlight state
>[  409.710937] video LNXVIDEO:01: Restoring backlight state
>[  410.127142] [drm:intel_enable_rc6], Haswell: only RC6 available
>[  410.127145] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  410.132127] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz

Actions: View

Attachments on bug 66301: 81617 | 82353

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.