Attachment 8950 Details for Bug 10157 – xorg.conf used to generate the attached log

xorg.conf used to generate the attached log

xorg.conf (text/plain), 17.61 KB, created by Matthew Hodgson on 2007-03-02 04:57:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matthew Hodgson

Created: 2007-03-02 04:57:41 UTC

Size: 17.61 KB

patch

obsolete

># $XdotOrg$
>#
># Copyright (c) 1994-1998 by The XFree86 Project, Inc.
>#
># Permission is hereby granted, free of charge, to any person obtaining a
># copy of this software and associated documentation files (the "Software"),
># to deal in the Software without restriction, including without limitation
># the rights to use, copy, modify, merge, publish, distribute, sublicense,
># and/or sell copies of the Software, and to permit persons to whom the
># Software is furnished to do so, subject to the following conditions:
># 
># The above copyright notice and this permission notice shall be included in
># all copies or substantial portions of the Software.
># 
># THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
># IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
># FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
># THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
># WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
># OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
># SOFTWARE.
># 
># Except as contained in this notice, the name of the XFree86 Project shall
># not be used in advertising or otherwise to promote the sale, use or other
># dealings in this Software without prior written authorization from the
># XFree86 Project.
>#
># $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $
>
># **********************************************************************
># This is a sample configuration file only, intended to illustrate
># what a config file might look like.  Refer to the XF86Config(4/5)
># man page for details about the format of this file. This man page
># is installed as MANPAGE 
># **********************************************************************
>
># The ordering of sections is not important in version 4.0 and later.
>
># **********************************************************************
># Files section.  This allows default font and rgb paths to be set
># **********************************************************************
>
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
>
>    RgbPath	"/usr/local/src/xorg-modular/share/X11/rgb"
>
># Multiple FontPath entries are allowed (which are concatenated together),
># as well as specifying multiple comma-separated entries in one FontPath
># command (or a combination of both methods)
>
>    FontPath	"/usr/local/src/xorg-modular/lib/X11/fonts/local"
>    FontPath	"/usr/local/src/xorg-modular/lib/X11/fonts/misc"
>    FontPath	"/usr/local/src/xorg-modular/lib/X11/fonts/Type1"
>    FontPath	"/usr/local/src/xorg-modular/lib/X11/fonts/TTF"
>    FontPath	"/usr/local/src/xorg-modular/lib/X11/fonts/75dpi"
>    FontPath	"/usr/local/src/xorg-modular/lib/X11/fonts/100dpi"
>
># ModulePath can be used to set a search path for the X server modules.
># The default path is shown here.
>
>#    ModulePath	"/usr/local/src/xorg-modular/lib/xorg/modules"
>
>EndSection
>
># **********************************************************************
># Module section -- this is an optional section which is used to specify
># which run-time loadable modules to load when the X server starts up.
># **********************************************************************
>
>Section "Module"
>
># This loads the DBE extension module.
>
>    Load	"dbe"
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
>    SubSection	"extmod"
>	Option	"omit xfree86-dga"
>    EndSubSection
>
># This loads the Type1 and FreeType font modules
>
>    Load	"type1"
>    Load	"freetype"
>
>    Load	"glx"
>    Load	"dri"
>
>EndSection
>
>Section "DRI"
>    Mode        0666
>EndSection
>
>
># **********************************************************************
># Server flags section.  This contains various server-wide Options.
># **********************************************************************
>
>Section "ServerFlags"
>
># Uncomment this to cause a core dump at the spot where a signal is 
># received.  This may leave the console in an unusable state, but may
># provide a better stack trace in the core dump to aid in debugging
>
>#    Option	"NoTrapSignals"
>
># Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
># (where n is 1 through 12).  This allows clients to receive these key
># events.
>
>#    Option	"DontVTSwitch"
>
># Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
># This allows clients to receive this key event.
>
>#    Option	"DontZap"
>
># Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
># sequences.  This allows clients to receive these key events.
>
>#    Option	"DontZoom"
>
># Uncomment this to disable tuning with the xvidtune client. With
># it the client can still run and fetch card and monitor attributes,
># but it will not be allowed to change them. If it tries it will
># receive a protocol error.
>
>#    Option	"DisableVidModeExtension"
>
># Uncomment this to enable the use of a non-local xvidtune client.
>
>#    Option	"AllowNonLocalXvidtune"
>
># Uncomment this to disable dynamically modifying the input device
># (mouse and keyboard) settings.
>
>#    Option	"DisableModInDev"
>
># Uncomment this to enable the use of a non-local client to
># change the keyboard or mouse settings (currently only xset).
>
>#    Option	"AllowNonLocalModInDev"
>
># Set the basic blanking screen saver timeout.
>
>    Option	"blank time"	"10"	# 10 minutes
>
># Set the DPMS timeouts.  These are set here because they are global
># rather than screen-specific.  These settings alone don't enable DPMS.
># It is enabled per-screen (or per-monitor), and even then only when
># the driver supports it.
>
>    Option	"standby time"	"20"
>    Option	"suspend time"	"30"
>    Option	"off time"	"60"
>
># On some platform the server needs to estimate the sizes of PCI
># memory and pio ranges. This is done by assuming that PCI ranges
># don't overlap. Some broken BIOSes tend to set ranges of inactive
># devices wrong. Here one can adjust how aggressive the assumptions
># should be. Default is 0.
>
># Option   "EstimateSizesAggresively" "0"
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Core keyboard's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier	"Keyboard1"
>    Driver	"kbd"
>
># Set the keyboard auto repeat parameters.  Not all platforms implement
># this.
>
>    Option	"AutoRepeat"	"500 5"
>
># Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
>
>#    Option	"Xleds"	"1 2 3"
>
># To disable the XKEYBOARD extension, uncomment XkbDisable.
>
>#    Option	"XkbDisable"
>
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a European
># keyboard, you will probably want to use one of:
>#
>#    Option	"XkbModel"	"pc102"
>    Option	"XkbModel"	"pc105"
>#
># If you have a Microsoft Natural keyboard, you can use:
>#
>#    Option	"XkbModel"	"microsoft"
>#
># If you have a US "windows" keyboard you will want:
>#
>#    Option	"XkbModel"	"pc104"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#
>#    Option	"XkbLayout"	"de"
>    Option	"XkbLayout"	"gb"
>#
># or:
>#
>#    Option	"XkbLayout"	"de"
>#    Option	"XkbVariant"	"nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#
>#    Option	"XkbOptions"	"ctrl:swapcaps"
>
>
># These are the default XKB settings for xorg
>#
>#    Option	"XkbRules"	"xorg"
>#    Option	"XkbModel"	"pc101"
>#    Option	"XkbLayout"	"us"
>#    Option	"XkbVariant"	""
>#    Option	"XkbOptions"	""
>
>EndSection
>
>
># **********************************************************************
># Core Pointer's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
># Identifier and driver
>
>    Identifier	"Mouse1"
>    Driver	"mouse"
>
># The mouse protocol and device.  The device is normally set to /dev/mouse,
># which is usually a symbolic link to the real device.
>
>#   Option	"Protocol"	"Microsoft"
>    Option	"Device"	"/dev/mouse"
>
># On platforms where PnP mouse detection is supported the following
># protocol setting can be used when using a newer PnP mouse:
>
>#    Option	"Protocol"	"Auto"
>
>     Option "Protocol"  "Auto"
>     Option "ZAxis Mapping" "4 5"
>
># When using mouse connected to a PS/2 port (aka "MousePort"), set the
># the protocol as follows.  On some platforms some other settings may
># be available.
>
>#    Option "Protocol"	"PS/2"
>
># Baudrate and SampleRate are only for some older Logitech mice.  In
># almost every case these lines should be omitted.
>
>#    Option	"BaudRate"	"9600"
>#    Option	"SampleRate"	"150"
>
># Emulate3Buttons is an option for 2-button mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
>#    Option	"Emulate3Buttons"
>#    Option	"Emulate3Timeout"	"50"
>
># ChordMiddle is an option for some 3-button Logitech mice, or any
># 3-button mouse where the middle button generates left+right button
># events.
>
>#    Option	"ChordMiddle"
>
>EndSection
>
>Section "InputDevice"
>    Identifier	"Mouse2"
>    Driver	"mouse"
>    Option	"Protocol"	"MouseMan"
>    Option	"Device"	"/dev/mouse2"
>EndSection
>
># Some examples of extended input devices
>
># Section "InputDevice"
>#    Identifier	"spaceball"
>#    Driver	"magellan"
>#    Option	"Device"	"/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier	"spaceball2"
>#    Driver	"spaceorb"
>#    Option	"Device"	"/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier	"touchscreen0"
>#    Driver	"microtouch"
>#    Option	"Device"	"/dev/ttyS0"
>#    Option	"MinX"		"1412"
>#    Option	"MaxX"		"15184"
>#    Option	"MinY"		"15372"
>#    Option	"MaxY"		"1230"
>#    Option	"ScreenNumber"	"0"
>#    Option	"ReportingMode"	"Scaled"
>#    Option	"ButtonNumber"	"1"
>#    Option	"SendCoreEvents"
># EndSection
>#
># Section "InputDevice"
>#    Identifier	"touchscreen1"
>#    Driver	"elo2300"
>#    Option	"Device"	"/dev/ttyS0"
>#    Option	"MinX"		"231"
>#    Option	"MaxX"		"3868"
>#    Option	"MinY"		"3858"
>#    Option	"MaxY"		"272"
>#    Option	"ScreenNumber"	"0"
>#    Option	"ReportingMode"	"Scaled"
>#    Option	"ButtonThreshold"	"17"
>#    Option	"ButtonNumber"	"1"
>#    Option	"SendCoreEvents"
># EndSection
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>
># The identifier line must be present.
>
>    Identifier  "H57 DVI"
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>     HorizSync  30-100
>
>#    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
>#    HorizSync	30-64         # multisync
>#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
>#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>     VertRefresh        43-120
>
>#    VertRefresh	60  # typical for a single frequency fixed-sync monitor
>
>#    VertRefresh	50-100        # multisync
>#    VertRefresh	60, 65        # multiple fixed sync frequencies
>#    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies
>
># Modes can be specified in two formats.  A compact one-line format, or
># a multi-line format.
>
># A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
># These two are equivalent
>
>#    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
>
>    Option "NoDDC"
>
>#    Mode "640x480"
>#        DotClock	25.175
>#        HTimings	640 664 760 800
>#        VTimings	480 491 493 525
>#    EndMode
>
>     Mode "1024x576p"
>         DotClock       43.500
>         HTimings       1024 1127 1231 1392
>         VTimings       576 577 580 625
>     EndMode
>
>     Mode "1280x720p"
>         DotClock       74.48
>         HTimings       1280 1336 1472 1664
>         VTimings       720 721 724 746
>     EndMode
>
>     Option		"PreferredMode"	"1024x576p"
>
># These two are equivalent
>
>#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
>
>#    Mode "1024x768i"
>#        DotClock	45
>#        HTimings	1024 1048 1208 1264
>#        VTimings	768 776 784 817
>#        Flags		"Interlace"
>#    EndMode
>
># If a monitor has DPMS support, that can be indicated here.  This will
># enable DPMS when the monitor is used with drivers that support it.
>
>#    Option	"dpms"
>
># If a monitor requires that the sync signals be superimposed on the
># green signal, the following option will enable this when used with
># drivers that support it.  Only a relatively small range of hardware
># (and drivers) actually support this.
>
>#    Option	"sync on green"
>
>EndSection
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
># Any number of graphics device sections may be present
>
>Section "Device"
>
># The Identifier must be present.
>
>    Identifier	"Intel 855GME"
>
># The Driver line must be present.  When using run-time loadable driver
># modules, this line instructs the server to load the specified driver
># module.  Even when not using loadable driver modules, this line
># indicates which driver should interpret the information in this section.
>
>    Driver	"intel"
>
>    VideoRam    131072
>    # this is needed to allow 1280x720 HDTV output on XV
>    # otherwise too little framebuffer gets alloced
>#   Option      "CacheLines" "4096"
>
>    Option      "NoAccel" "off"
>    Option      "DRI" "on"
>    Option      "PageFlip" "on"
>
># The chipset line is optional in most cases.  It can be used to override
># the driver's chipset detection, and should not normally be specified.
>
>#    Chipset	"generic"
>
># Various other lines can be specified to override the driver's automatic
># detection code.  In most cases they are not needed.
>
>#    VideoRam	256
>#    Clocks	25.2 28.3
>
># The BusID line is used to specify which of possibly multiple devices
># this section is intended for.  When this line isn't present, a device
># section can only match up with the primary video device.  For PCI
># devices a line like the following could be used.  This line should not
># normally be included unless there is more than one video device
># intalled.
>
>#    BusID	"PCI:0:10:0"
>
># Various option lines can be added here as required.  Some options
># are more appropriate in Screen sections, Display subsections or even
># Monitor sections.
>
>#    Option	"hw cursor" "off"
>
>EndSection
>
>Section "Device"
>    Identifier	"any supported Trident chip"
>    Driver	"trident"
>EndSection
>
>Section "Device"
>    Identifier	"MGA Millennium I"
>    Driver	"mga"
>    Option	"hw cursor" "off"
>    BusID	"PCI:0:10:0"
>EndSection
>
>Section "Device"
>    Identifier	"MGA G200 AGP"
>    Driver	"mga"
>    BusID	"PCI:1:0:0"
>    Option	"pci retry"
>EndSection
>
>
># **********************************************************************
># Screen sections.
># **********************************************************************
>
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
>
>Section "Screen"
>
># The Identifier, Device and Monitor lines must be present
>
>    Identifier	"Screen 1"
>    Device	"Intel 855GME"
>    Monitor	"H57 DVI"
>    Option      "monitor-TMDS" "H57 DVI"
>
># The favoured Depth and/or Bpp may be specified here
>
>    DefaultDepth 24
>
>    SubSection "Display"
>        Depth           24
>        Virtual         1024 576
>        Modes           "1024x576p" "1280x720p"
>    EndSubsection
>
>EndSection
>
>
># **********************************************************************
># ServerLayout sections.
># **********************************************************************
>
># Any number of ServerLayout sections may be present.  Each describes
># the way multiple screens are organised.  A specific ServerLayout
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
>
>Section "ServerLayout"
>
># The Identifier line must be present
>
>    Identifier	"Main Layout"
>
># Each Screen line specifies a Screen section name, and optionally
># the relative position of other screens.  The four names after
># primary screen name are the screens to the top, bottom, left and right
># of the primary screen.  In this example, screen 2 is located to the
># right of screen 1.
>
>    Screen "Screen 1" "" "" "" ""
>
>#    Screen	"Screen MGA 1"	""	""	""	"Screen MGA 2"
>#    Screen	"Screen MGA 2"	""	""	"Screen MGA 1"	""
>
># Each InputDevice line specifies an InputDevice section name and
># optionally some options to specify the way the device is to be
># used.  Those options include "CorePointer", "CoreKeyboard" and
># "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
># and "Mouse2" is an extended input device that also generates core
># pointer events (i.e., both mice will move the standard pointer).
>
>    InputDevice	"Mouse1" "CorePointer"
>#   InputDevice	"Mouse2" "SendCoreEvents"
>    InputDevice "Keyboard1" "CoreKeyboard"
>
>EndSection
>

Actions: View

Attachments on bug 10157: 8949 | 8950

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.