Attachment 913 Details for Bug 1390 – host.def file used to build server

host.def file used to build server

host.def (text/plain), 17.28 KB, created by J. Scott Berg on 2004-09-15 07:11:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: J. Scott Berg

Created: 2004-09-15 07:11:46 UTC

Size: 17.28 KB

patch

obsolete

>XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
>/******************************************************************************/
>/*
> * This file is to provide a quick method for most people to change the
> * behaviour of their XFree86 installation without having to fully
> * understand the workings of site.def and all the various '.cf' files.
> *
> * In the vast majority of cases, it should not be necessary to use this
> * file at all or change it in any way.
> *
> * This file is divided into two sections.  The first contains settings
> * that end-users might reasonably change.  The second contains settings
> * that developers might want to change.
> *
> * IMPORTANT NOTE:  In all cases changing the defaults may cause problems
> * and/or unexpected side-effects.  If you don't understand what a setting
> * does, then it's best to not change it.  If you make changes and have
> * problems, verify that those problems are also present when using an
> * empty host.def file and unchanged version of this file before reporting
> * them.
> *
> * A good way to use this file is to copy it to host.def, and make the
> * changes there.  That way, future patches to this file won't fail.
> * The host.def file will never be patched.
> *
> * The distributed version of this file MUST contain no uncommented
> * definitions.  Default definitions belong in xfree86.cf, or <vendor>.cf
> * files.
> */
>/******************************************************************************/
>
>/*
> * If you have build-specific modifications in your host.def file, but
> * want an empty host.def file installed when doing 'make install',
> * uncomment the following
> *
>#define InstallEmptyHostDef
> */
>
>/*
> * Which servers to build.  There is only Xorg server.
> * It can be disabled by the following.
> *
>#define XorgServer		NO
> */
>
>/*
> * To disable building the Xnest server, uncomment this.
> *
>#define XnestServer		NO
> */
>
>/*
> * To disable building Xvfb, uncomment this.
> *
>#define XVirtualFramebufferServer	NO
> */
>
>/*
> * To enable building Xdmx, uncomment this.
> *
>#define XdmxServer YES
> */
>
>/*
> * To disable building Xprt, uncomment this.
> *
>#define XprtServer NO
> */
>
>/*
> * Set the default server (ie the one that gets the sym-link to "X")
> *
>#define ServerToInstall		XFree86
> */
>
>/*
> * If you only run the X server under xdm the X servers don't need to be
> * installed SetUID, and you may comment out the lines below.  If you run
> * the servers by hand (with xinit or startx), then they do need to be
> * installed SetUID on most platforms.
> *
> * Consult your system administrator before making the X server setuid.
> *
>#define InstallXserverSetUID	NO
> */
>
>
>/*
> * Server configuration parameters.  The defaults are shown here:
> */
>
>/*
> * Which drivers to build.  When building a static server, each of these
> * will be included in it.  When building the loadable server each of these
> * modules will be built.
> *
>#define XF86CardDrivers		mga glint nv tga s3virge sis rendition \
>				neomagic i740 tdfx savage \
>				cirrus vmware tseng trident chips apm \
>				GlideDriver fbdev i128 \
>				ati DevelDrivers ark cyrix \
>				siliconmotion \
>				vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
> */
>
>/*
> * To add third party drivers to the standard driver list, set the
> * following.
> *
>#define XF86ExtraCardDrivers	extradriver1 extradriver2 ...
> */
>
>/*
> * Select the XInput devices you want by uncommenting this.
> *
>#define XInputDrivers		mouse keyboard acecad calcomp citron \
>				digitaledge dmc dynapro elographics \
>				microtouch mutouch penmount spaceorb summa \
>				wacom void magictouch aiptek
> */
>
>/* To enable building of development DRI drivers (insecure, or not
> * useful on the chosen architecture, uncomment this define.
>#define BuildDevelDRIDrivers YES
> */
>
>/*
> * To use the deprecated, old keyboard driver, uncomment this.  But
> * even better, make the new keyboard driver (hw/xfree86/input/keyboard)
> * work for your architechture.  The old driver will be removed in the
> * next release.
> *
>#define UseDeprecatedKeyboardDriver YES
> */
>
>/*
> * There are three parameters that determine where and how the Matrox HAL
> * library is used:
> *
> *   HaveMatroxHal  -- You have the HALlib.a binary library installed
> *                     in xfree86/drivers/mga/HALlib, and you want it to
> *                     be used.
> *                     Default: NO
> *
> *   BuildMatroxHal -- You have the source for the HALlib library (installed
> *                     in xfree86/drivers/mga/hallib), and want to build and
> *                     use it.
> *                     Default: NO
> *
> *   UseMatroxHal   -- You want to build support for loading/using the HAL
> *                     library into the mga driver.  For module server builds
> *                     you don't need to have the HALlib library to do this.
> *                     but you want to build support for loading it and using
> *                     it into the mga driver module.
> *                     Default: YES for loadable server build
> *                              (HaveMatroxHal || BuildMatroxHal) for static
> */
>
>/*
> * To disable use of the Matrox HAL library, uncomment this:
> *
>#define UseMatroxHal		NO
> */
>
>/*
> * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib,
> * uncomment this:
> *
> */
>#define HaveMatroxHal		YES
>
>/*
> * If you have the HALlib source code installed in xfree86/drivers/mga/hallib,
> * uncomment this:
>#define BuildMatroxHal		YES
> */
>
>/*
> * To disable building the font server, uncomment this.
> *
>#define BuildFontServer		NO
> */
>
>/*
> * To disable support for Speedo fonts, uncomment this.
> *
>#define BuildSpeedo		NO
> */
>
>/*
> * To disable support for CID fonts, uncomment this.
> *
>#define BuildCID		NO
> */
>
>/*
> * To disable support for TrueType fonts, uncomment these.
> *
>#define BuildFreeType		NO
> */
>
>/*
> * To set non-default build options for the underlying FreeType libraries,
> * add them here and uncomment.
> *
>#define Freetype2BuildDefines	-DFREETYPE_BUILD_DEFINES
> */
>
>/*
> * To build the FreeType libraries with the TrueType byte code interpreter
> * enabled, uncomment this.  Note that there are patent issues related to the
> * TrueType byte code interpreter, and we only recommend you enabling this
> * if you are sure that there are no legal impediments to you doing so.  See
> * <http://www.freetype.org/patents.html> for further information.
> *
>#define Freetype2BuildDefines -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER
> */
>
>/*
> * Do you want to Build Fonts (Usually you only want to build and install
> * fonts once, if this is a first time install you will want to build the
> * fonts)
> *
>#define BuildFonts		NO
> */
>
>/*
> * To not build/install the 75dpi fonts, uncomment the following
> *
>#define Build75DpiFonts		NO
> */
>
>/*
> * To not build/install the 100dpi fonts, uncomment the following
> *
>#define Build100DpiFonts	NO
> */
>
>/*
> * To not build/install the Speedo fonts, uncomment the following
> *
>#define BuildSpeedoFonts	NO
> */
>
>/*
> * To not build/install the Type1 fonts, uncomment the following
> *
>#define BuildType1Fonts		NO
> */
>
>/*
> * To not build/install the CID fonts, uncomment the following
> *
>#define BuildCIDFonts		NO
> */
>
>/*
> * To not build/install the True Type fonts, uncomment the following
> *
>#define BuildTrueTypeFonts	NO
> */
>
>/*
> * To not build/install the Cyrillic fonts, uncomment the following
> *
>#define BuildCyrillicFonts	NO
> */
>
>/*
> * To not install the local font directory, uncomment the following
> *
>#define MakeLocalFontDir	NO
> */
>
>/*
> * To build only the servers with a cut-down source tree, uncomment
> * this.
> *
>#define BuildServersOnly	YES
> */
>
>/*
> * By default, the sample config files for xinit, xdm and xfs are installed
> * only when there is no pre-existing version installed.  Uncommenting the
> * following lines will force the sample versions to be installed even if
> * it means over-writing existing versions.
> *
>#define InstallXinitConfig	YES
>#define InstallXdmConfig	YES
>#define InstallFSConfig		YES
> */
>
>/*
> * By default the application defaults files are always installed.
> * Uncommenting the the following will prevent exising application
> * defaults files from being over-written.
> *
>#define InstallAppDefFiles	NO
> */
>
>/*
> * Undefine the following if you don't want to have config files and
> * app-defaults installed in a separate directory (i.e. /etc/X11).
> *
>#define UseSeparateConfDir NO
> */
>
>/* 
> * To enable building the glide driver, you need to define 
> * HasGlide2 to YES and set the Glide2IncDir variable. 
> * HasGlide2 is per default NO.
> *
>#define HasGlide2 YES
> */
>
>/*
> * Set the path to your Glide include files.
> *
>#define Glide2IncDir /usr/include/glide
> */
>
>/* 
> * Have glide 3?
> *
>#define HasGlide3 YES
> */
>
>/*
> * Set the path to your Glide 3 include files.
> *
>#define Glide3IncDir /usr/include/glide3
> */
>
>
>
>/*
> * Unless you're a developer you shouldn't need to change anything
> * beyond this point.
> */
>
>/*
> * If you want to enable some developer settings, like more verbose
> * compiler warnings, uncomment this.
> *
>#define XFree86Devel	YES
>*/
>
>/*
> * The default optimisation flags for GCC 2.x.  -fno-strength-reduce is
> * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
> * If you are using a version that doesn't have this bug, you can
> * uncomment the following line, and remove '-fno-strength-reduce'
> * If you are building binaries for a 486, it may be beneficial to add
> * -m486
> *
> */
>#define DefaultGcc2i386Opt	-O2 -march='pentium4'
>
>/*
> * This allows the GCC warning flags to be set.  The default is shown here.
> *
>#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \
>                          -Wmissing-prototypes -Wmissing-declarations \
>                          -Wredundant-decls -Wnested-externs
> */
>
>/* 
> * Sun Compiler stuff.. 
> *
>#define HasSunC                         YES
>#define HasSunCplusplus                 YES
>#define CplusplusCompilerMajorVersion   5
>#define CplusplusCompilerMinorVersion   0
>#define CCompilerMajorVersion           5
>#define CCompilerMinorVersion           0
> */
>
>/*
> * Optimized Sun Compiler Build.
> *
>#define DefaultCDebugFlags              -xO4 -xtarget=pentium_pro
>#define OptimizedCDebugFlags            -xO4 -xtarget=pentium_pro
> */
>
>/* 
> * Debuggable Sun Compiler Build. 
> * Note: This builds _EVERYTHING_ as debuggable
> *
>#define DefaultCDebugFlags              -g -xs
>#define OptimizedCDebugFlags            -g -xs
> */
>
>/*
> * For Linux, this should match the Binutils version you have.  This example
> * is for 2.6.0.7.  See linux.cf for the default setting.
> *
> * This should automatically get set correctly by imake.
> *
>#define LinuxBinUtilsMajorVersion	26
> */
>
>/*
> * For Linux, these should match the libc version you have.  This example
> * is for libc.5.4.x.  See linux.cf for the default setting.
> *
> * This should automatically get set correctly by imake.
> *
>#define LinuxCLibMajorVersion	5
>#define LinuxClibMinorVersion	4
> */
>
>/*
> * If you want to use the GNU malloc library, uncomment this
> *
>#define UseGnuMalloc		YES
> */
>
>/*
> * Set this to whatever is required to access the GNU malloc library.
> * The default is '-lgmalloc' unless is specified in the OS's .cf file.
> *
>#define GnuMallocLibrary	-L/usr/local/lib -lgmalloc
> */
>
>/*
> * To enable the internal Xserver malloc, uncomment this
> *
>#define UseInternalMalloc	YES
> */
>
>/*
> * Some Linux releases don't have a libtermcap.  In this case you may need
> * to uncomment the following
> *
> */
>#define TermcapLibrary		-lncurses
>
>/*
> * Build a server that dynamically loads the modules by setting
> * this to YES.  This defaults to YES on most platforms.  A static server
> * can be built by setting this to NO.
> *
>#define DoLoadableServer	NO
> */
>
>/*
> * Build dlopen() style modules instead of the standard loader modules.
> * Don't enable this unless you have specific development reasons for
> * doing so and understand how to deal with the problems you'll run in to.
> *
> * Enabling this for regular use is NOT supported, and will almost
> * certainly cause you problems.
> *
>#define MakeDllModules		YES
> */
>
>/*
> * Build XAA.  This can be disabled with:
> *
>#define XF86XAA			NO
> */
>
>/*
> * Build vgahw.  This can be disabled with:
> *
>#define XF86VgaHw		NO
> */
>
>/*
> * Build xf1bpp.  This can be disabled with:
> *
>#define XF1Bpp			NO
> */
>
>/*
> * Build xf4bpp.  This can be disabled with:
> *
>#define XF4Bpp			NO
> */
>
>
>/*
> * BSD Console driver support (for FreeBSD and NetBSD).
> *
> * By default, support is included for pccons and pcvt for NetBSD, and
> * pccons, syscons and pcvt for FreeBSD.
> *
> * To change the list of supported drivers, set the following parameter.
> * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT.
> * The following example includes support for syscons and pcvt only.
> *
>#define XFree86ConsoleDefines	-DSYSCONS_SUPPORT -DPCVT_SUPPORT
> */
>
>/*
> * To link the X server with a dynamic version of the Xfont library,
> * uncomment this.
> *
>#define XserverStaticFontLib	NO
> */
>
>/*
> * To enable binary compatibility with previous versions of the font
> * encoding support, uncomment this.
> *
>#define FontencCompatibility    YES
> */
>
>/*
> * To disable building XInput support, uncomment this
> *
>#define BuildXInputExt		NO
> */
>
>/*
> * Uncomment this for joystick support.
> *
> * Note: Joystick support is broken, so don't enable this.
> *
>#define JoystickSupport YES
> */
>
>/*
> * To disable the ScreenSaver Extension, uncomment this line.
> *
>#define BuildScreenSaverExt	NO
> */
>
>/* 
> * If you don't want to build Xinerama support, uncomment this.
> *
>#define BuildXinerama		NO
> */
>
>/*
> * If you don't want to build support for the GLX extension, uncomment this.
> *
>#define BuildGlxExt             NO
> */
>
>/*
> * If you want to build the xf86rush extension, uncomment this line.
> * This isn't recommended.
> *
>#define BuildXF86RushExt	YES
> */
>
>/*
> * If you want to build the client library for the xf86rush extension,
> * uncomment this line.  This isn't recommended.
> *
>#define BuildXF86RushLibrary	NO
> */
>
>/*
> * If you are running NetBSD 0.9C or later, and have the aperture driver
> * installed, uncomment this.
> *
>#define HasNetBSDApertureDriver	YES
> */
>
>/*
> * If you are running SVR3 and have the mmap driver installed (for linear
> * framebuffer access) uncomment this.
> *
>#define HasSVR3mmapDrv	YES
> */
>
>/*
> * If you are using an SVR3 (like ISC 4.x) which supports long file names,
> * you can * uncomment this to have manual pages installed under their
> * full names
> *
> */
>#define ExpandManNames		YES
>
>/*
> * For a POSIXized build on Interactive uncomment this
> * Could be used with gcc 'till Version 2.6.3
> * Should be used with gcc 2.7.2. 
> *
> */
>#define UsePosix		YES
>
>/*
> * If you don't want XDMAUTH support (if you don't have Wraphelp.c), 
> *  comment this out.
> *
> */
>#define HasXdmAuth		YES
>
>/*
> * If you have Linux DECnet support, and want to build XFree86 with support
> * for connections over DECnet, uncomment this.
> *
>#define HasDECnet		YES
> */
>
>/*
> * To build static and shared libraries with debugging information, uncomment
> * this. Assumes you have Gcc2.
> * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables
> * to build debugging versions of the libraries separately.)
> *
>#define DebuggableLibraries	YES
>*/
>
>/*
> * To forceably build static libraries in addition to shared libraries,
> * uncomment this.
> *
> */
>#define ForceNormalLib		YES
>
>/*
> * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
> * not the Linux ELF versions.
> *
>#define LinuxElfDefault		NO
> */
>
>/*
> * To use ELF format shared libraries for supported OSs, uncomment this.
> *
> * For Linux the default setting of this is the same as the setting of
> * LinuxElfDefault.
> *
> * For FreeBSD this should automatically be set correctly by imake.  Only
> * change it here if you need to override the automatic setting.
> *
>#define UseElfFormat		YES
> */
>
>/*
> * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
> * a.out compatibility libraries.  To enable that, uncomment this.
> *
>#define BuildAoutLibraries	YES
> */
>
>/*
> * If you have trouble with make bombing out in Xlib, try uncommenting this.
> * You will not get dependencies as a result, but better than nothing.
> *
>#define MakeHashTableBug        YES
> */
>
>/*
> * If you do not want your man pages compress under SVR3 systems that
> * support it, uncomment this.
> *
>#define CompressManPages        NO
> */
>
>/*
> * If you have sgmlfmt (the XFree86 doctools package) and want to build
> * formatted docs from the SGML source, uncomment this.
> *
>#define HasSgmlFmt		YES
> */
>
>/*
> * To disable building some document formats, uncomment some of these.
> *
>#define BuildLinuxDocText	NO
>#define BuildLinuxDocHtml	NO
>#define BuildLinuxDocPS		NO
> */
>
>/*
> * To install Japanese versions of the documentation uncomment this.
> * Note: The Japanese documentation consists of a subset of the
> * XFree86 3.1 docs.
> *
>#define InstallJapaneseDocs	YES
> */
>
>/*
> * To build/install X specs docs, uncomment the following.
> * The SpecsDocDirs setting here is recommended because it covers
> * the docs that XFree86 has changed or added.
> *
>#define BuildSpecsDocs		YES
>#define SpecsDocDirs		CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n xterm
> */
>
>/*
> * To build all specs docs, not just those listed in SpecsDocDirs, uncomment
> * the following.
> *
>#define BuildAllSpecsDocs	YES
> */
>
>/*
> * If your system doesn't support vm86() mode and you have
> * libx86emu set library path here
> *
>#define X86EMU_LIBPATH /usr/local/lib
> */ 
>
>
>#define CppCmd		/opt/gcc/bin/cpp
>#define HasZlib		YES
>#define HasLibpng	YES
>#define LibpngDir	/opt/libpng
>#define HasFreetype2	YES
>#define Freetype2Dir	/opt/freetype
>#define HasFontconfig	YES
>#define FontconfigDir	/opt/fontconfig
>#define HasExpat	YES
>#define ExpatDir	/opt/expat

Actions: View

Attachments on bug 1390: 913

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.