Attachment 92105 Details for Bug 73639 – dmesg

dmesg

dmesg_pnv1_0115.txt (text/plain), 119.37 KB, created by lu hua on 2014-01-15 02:28:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-01-15 02:28:40 UTC

Size: 119.37 KB

patch

obsolete

>[    0.023000] CPU 1 irqstacks, hard=f68a2000 soft=f68a4000
>[    0.023000] x86: Booting SMP configuration:
>[    0.003000] Initializing CPU#1
>[    0.003000] Disabled fast string operations
>[    0.003000] CPU1: Thermal monitoring handled by SMI
>[    0.023000] .... node  #0, CPUs:      #1
>[    0.034094] x86: Booted up 1 node, 2 CPUs
>[    0.034126] smpboot: Total of 2 processors activated (6650.08 BogoMIPS)
>[    0.035416] devtmpfs: initialized
>[    0.036392] PM: Registering ACPI NVS region [mem 0x3dbf2000-0x3dbf2fff] (4096 bytes)
>[    0.036409] PM: Registering ACPI NVS region [mem 0x3dc7a000-0x3dc81fff] (32768 bytes)
>[    0.036424] PM: Registering ACPI NVS region [mem 0x3dcb2000-0x3dcb4fff] (12288 bytes)
>[    0.036437] PM: Registering ACPI NVS region [mem 0x3e0b9000-0x3e0bafff] (8192 bytes)
>[    0.036451] PM: Registering ACPI NVS region [mem 0x3e0d0000-0x3e0d1fff] (8192 bytes)
>[    0.036464] PM: Registering ACPI NVS region [mem 0x3e0d4000-0x3e0ddfff] (40960 bytes)
>[    0.036478] PM: Registering ACPI NVS region [mem 0x3e0df000-0x3e0e0fff] (8192 bytes)
>[    0.036492] PM: Registering ACPI NVS region [mem 0x3e0e2000-0x3e102fff] (135168 bytes)
>[    0.036509] PM: Registering ACPI NVS region [mem 0x3e104000-0x3e10cfff] (36864 bytes)
>[    0.036523] PM: Registering ACPI NVS region [mem 0x3e11a000-0x3e11afff] (4096 bytes)
>[    0.036536] PM: Registering ACPI NVS region [mem 0x3e19b000-0x3e19bfff] (4096 bytes)
>[    0.036598] xor: measuring software checksum speed
>[    0.045172]    pIII_sse  :  5188.000 MB/sec
>[    0.055171]    prefetch64-sse:  5708.000 MB/sec
>[    0.055184] xor: using function: prefetch64-sse (5708.000 MB/sec)
>[    0.055219] RTC time:  2:01:48, date: 01/15/14
>[    0.056092] NET: Registered protocol family 16
>[    0.057078] cpuidle: using governor ladder
>[    0.057078] cpuidle: using governor menu
>[    0.057225] ACPI: bus type PCI registered
>[    0.057275] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.057275] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.057275] PCI: Using MMCONFIG for extended config space
>[    0.057275] PCI: Using configuration type 1 for base access
>[    0.094131] bio: create slab <bio-0> at 0
>[    0.111064] raid6: mmxx1      382 MB/s
>[    0.128071] raid6: mmxx2      742 MB/s
>[    0.145054] raid6: sse1x1     308 MB/s
>[    0.162061] raid6: sse1x2     574 MB/s
>[    0.179033] raid6: sse2x1     613 MB/s
>[    0.196034] raid6: sse2x2    1140 MB/s
>[    0.196044] raid6: using algorithm sse2x2 (1140 MB/s)
>[    0.196053] raid6: using ssse3x1 recovery algorithm
>[    0.196111] ACPI: Added _OSI(Module Device)
>[    0.196123] ACPI: Added _OSI(Processor Device)
>[    0.196132] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.196141] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.202405] ACPI: Executed 6 blocks of module-level executable AML code
>[    0.204790] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.205598] ACPI: SSDT 3dc0ec90 0001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
>[    0.206365] ACPI: Dynamic OEM Table Load:
>[    0.206379] ACPI: SSDT   (null) 0001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
>[    0.206604] ACPI: SSDT 3dc0de10 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
>[    0.207326] ACPI: Dynamic OEM Table Load:
>[    0.207339] ACPI: SSDT   (null) 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
>[    0.213502] ACPI: SSDT 3dc0ef10 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
>[    0.214251] ACPI: Dynamic OEM Table Load:
>[    0.214264] ACPI: SSDT   (null) 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
>[    0.214460] ACPI: SSDT 3dc0ff10 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
>[    0.215185] ACPI: Dynamic OEM Table Load:
>[    0.215198] ACPI: SSDT   (null) 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
>[    0.223103] ACPI: Interpreter enabled
>[    0.223133] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
>[    0.223157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
>[    0.223206] ACPI: (supports S0 S3 S4 S5)
>[    0.223215] ACPI: Using IOAPIC for interrupt routing
>[    0.223294] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.223294] ACPI: No dock devices found.
>[    0.243120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.243147] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.243170] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
>[    0.243323] \_SB_.PCI0:_OSC evaluation returned wrong type
>[    0.243327] _OSC request data:1 1f 0 
>[    0.243337] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
>[    0.244890] PCI host bridge to bus 0000:00
>[    0.244890] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.244890] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.245015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.245029] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.245042] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
>[    0.245068] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
>[    0.245245] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
>[    0.245245] pci 0000:00:02.0: reg 0x10: [mem 0x58180000-0x581fffff]
>[    0.245245] pci 0000:00:02.0: reg 0x14: [io  0x60c0-0x60c7]
>[    0.245245] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
>[    0.245245] pci 0000:00:02.0: reg 0x1c: [mem 0x58000000-0x580fffff]
>[    0.245282] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
>[    0.245282] pci 0000:00:02.1: reg 0x10: [mem 0x58100000-0x5817ffff]
>[    0.245282] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.245282] pci 0000:00:1b.0: reg 0x10: [mem 0x58200000-0x58203fff 64bit]
>[    0.246126] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.246239] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.246322] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.246322] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.246342] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.246420] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
>[    0.246420] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.247101] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.247182] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.247182] pci 0000:00:1d.0: reg 0x20: [io  0x6080-0x609f]
>[    0.247315] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.247399] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.247399] pci 0000:00:1d.1: reg 0x20: [io  0x6060-0x607f]
>[    0.247399] pci 0000:00:1d.1: System wakeup disabled by ACPI
>[    0.248057] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.248130] pci 0000:00:1d.2: reg 0x20: [io  0x6040-0x605f]
>[    0.248312] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.248312] pci 0000:00:1d.3: reg 0x20: [io  0x6020-0x603f]
>[    0.248312] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.248312] pci 0000:00:1d.7: reg 0x10: [mem 0x58204400-0x582047ff]
>[    0.248312] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.249115] pci 0000:00:1d.7: System wakeup disabled by ACPI
>[    0.249199] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.249226] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.249304] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
>[    0.249304] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
>[    0.249304] pci 0000:00:1f.2: reg 0x10: [io  0x60b8-0x60bf]
>[    0.249304] pci 0000:00:1f.2: reg 0x14: [io  0x60cc-0x60cf]
>[    0.249304] pci 0000:00:1f.2: reg 0x18: [io  0x60b0-0x60b7]
>[    0.249304] pci 0000:00:1f.2: reg 0x1c: [io  0x60c8-0x60cb]
>[    0.249304] pci 0000:00:1f.2: reg 0x20: [io  0x60a0-0x60af]
>[    0.249304] pci 0000:00:1f.2: reg 0x24: [mem 0x58204000-0x582043ff]
>[    0.249304] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.250031] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.250104] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
>[    0.250274] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
>[    0.250274] pci 0000:01:00.0: reg 0x10: [io  0x5000-0x50ff]
>[    0.251043] pci 0000:01:00.0: reg 0x18: [mem 0x50010000-0x50010fff 64bit pref]
>[    0.251074] pci 0000:01:00.0: reg 0x20: [mem 0x50000000-0x5000ffff 64bit pref]
>[    0.251096] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
>[    0.251194] pci 0000:01:00.0: supports D1 D2
>[    0.251200] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.253035] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.253053] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
>[    0.253063] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
>[    0.253077] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
>[    0.253189] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
>[    0.253189] pci 0000:02:00.0: reg 0x10: [mem 0x56000000-0x5600ffff 64bit]
>[    0.253266] pci 0000:02:00.0: supports D1
>[    0.253272] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
>[    0.255033] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.255050] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.255060] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
>[    0.255074] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
>[    0.255153] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
>[    0.255153] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.255153] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.255153] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.255153] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
>[    0.255182] pci_bus 0000:00: on NUMA node 0
>[    0.255389] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>[    0.255572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.255757] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>[    0.256129] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>[    0.256309] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>[    0.256492] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>[    0.256676] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>[    0.256863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>[    0.258094] ACPI: Enabled 5 GPEs in block 00 to 1F
>[    0.258127] ACPI: \_SB_.PCI0: notify handler is installed
>[    0.258225] Found 1 acpi root devices
>[    0.258334] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
>[    0.258378] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.258378] vgaarb: loaded
>[    0.258378] vgaarb: bridge control possible 0000:00:02.0
>[    0.259065] SCSI subsystem initialized
>[    0.259076] libata version 3.00 loaded.
>[    0.259076] ACPI: bus type USB registered
>[    0.260038] usbcore: registered new interface driver usbfs
>[    0.260085] usbcore: registered new interface driver hub
>[    0.260085] usbcore: registered new device driver usb
>[    0.260085] pps_core: LinuxPPS API ver. 1 registered
>[    0.260085] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.260085] PTP clock support registered
>[    0.261076] PCI: Using ACPI for IRQ routing
>[    0.270524] PCI: pci_cache_line_size set to 64 bytes
>[    0.270604] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.270611] e820: reserve RAM buffer [mem 0x3dbd5000-0x3fffffff]
>[    0.271164] NetLabel: Initializing
>[    0.271164] NetLabel:  domain hash size = 128
>[    0.271164] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.271164] NetLabel:  unlabeled traffic allowed by default
>[    0.271338] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.271357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.271373] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.274038] Switched to clocksource hpet
>[    0.274216] pnp: PnP ACPI init
>[    0.274249] ACPI: bus type PNP registered
>[    0.275206] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.275225] system 00:00: [io  0x0380-0x0387] has been reserved
>[    0.275239] system 00:00: [io  0x0600-0x060f] has been reserved
>[    0.275251] system 00:00: [io  0x0610] has been reserved
>[    0.275263] system 00:00: [io  0x0800-0x080f] has been reserved
>[    0.275275] system 00:00: [io  0x0810-0x0817] has been reserved
>[    0.275289] system 00:00: [io  0x0400-0x047f] could not be reserved
>[    0.275301] system 00:00: [io  0x0500-0x053f] has been reserved
>[    0.275316] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.275329] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.275342] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
>[    0.275356] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.275369] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.275382] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.275396] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.275412] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.275447] pnp 00:01: [dma 4]
>[    0.275570] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.275756] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.276067] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.276224] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.276380] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.276567] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.276734] pnp 00:07: Plug and Play ACPI device, IDs SYN1e18 PNP0f13 (active)
>[    0.276894] pnp: PnP ACPI: found 8 devices
>[    0.276906] ACPI: bus type PNP unregistered
>[    0.322923] pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
>[    0.322995] pci 0000:01:00.0: BAR 6: assigned [mem 0x50020000-0x5002ffff pref]
>[    0.323032] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.323049] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
>[    0.323067] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
>[    0.323083] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
>[    0.323105] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.323118] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.323134] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
>[    0.323150] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
>[    0.323171] pci 0000:00:1e.0: PCI bridge to [bus 05]
>[    0.323198] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.323205] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.323211] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.323218] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
>[    0.323224] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
>[    0.323231] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
>[    0.323238] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
>[    0.323244] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>[    0.323250] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
>[    0.323257] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
>[    0.323264] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
>[    0.323270] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
>[    0.323276] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.323283] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
>[    0.323352] NET: Registered protocol family 2
>[    0.323659] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.323705] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.323768] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.323817] TCP: reno registered
>[    0.323829] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.323851] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.323995] NET: Registered protocol family 1
>[    0.324230] RPC: Registered named UNIX socket transport module.
>[    0.324243] RPC: Registered udp transport module.
>[    0.324252] RPC: Registered tcp transport module.
>[    0.324260] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.324287] pci 0000:00:02.0: Boot video device
>[    0.326388] PCI: CLS 64 bytes, default 64
>[    1.332246] Simple Boot Flag at 0x44 set to 0x1
>[    1.334797] audit: initializing netlink socket (disabled)
>[    1.334833] type=2000 audit(1389751309.333:1): initialized
>[    1.393587] bounce pool size: 64 pages
>[    1.393607] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    1.402250] VFS: Disk quotas dquot_6.5.2
>[    1.402452] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.405377] NFS: Registering the id_resolver key type
>[    1.405410] Key type id_resolver registered
>[    1.405419] Key type id_legacy registered
>[    1.405432] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.405851] fuse init (API version 7.22)
>[    1.406593] bio: create slab <bio-1> at 1
>[    1.407546] Btrfs loaded
>[    1.407575] msgmni has been set to 1696
>[    1.408468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.408486] io scheduler noop registered
>[    1.408494] io scheduler deadline registered
>[    1.408773] io scheduler cfq registered (default)
>[    1.409321] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    1.409776] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    1.410267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.410997] tsc: Marking TSC unstable due to TSC halts in idle
>[    1.411039] ACPI: acpi_idle registered with cpuidle
>[    1.415183] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.415198] ACPI: Thermal Zone [TZ0] (61 C)
>[    1.415534] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.417888] Non-volatile memory driver v1.3
>[    1.417914] Linux agpgart interface v0.103
>[    1.418272] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
>[    1.418433] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>[    1.418650] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>[    1.419113] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
>[    1.426289] brd: module loaded
>[    1.427450] Loading iSCSI transport class v2.0-870.
>[    1.429342] iscsi: registered transport (tcp)
>[    1.429840] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.430226] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.430777] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
>[    1.431160] iscsi: registered transport (qla4xxx)
>[    1.431300] QLogic iSCSI HBA Driver
>[    1.431311] Emulex LightPulse Fibre Channel SCSI driver 8.3.43
>[    1.431320] Copyright(c) 2004-2013 Emulex.  All rights reserved.
>[    1.431925] DC390: clustering now enabled by default. If you get problems load
>[    1.431942]        with "disable_clustering=1" and report to maintainers
>[    1.432243] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.432633] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
>[    1.432771] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.432902] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.433251] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.433483] osst :I: Tape driver with OnStream support version 0.99.4
>[    1.433483] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.434171] SCSI Media Changer driver v0.25 
>[    1.434443] ahci 0000:00:1f.2: version 3.0
>[    1.434758] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
>[    1.434832] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    1.434889] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
>[    1.434907] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>[    1.437647] scsi0 : ahci
>[    1.438057] scsi1 : ahci
>[    1.438438] scsi2 : ahci
>[    1.438814] scsi3 : ahci
>[    1.439173] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 42
>[    1.439192] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 42
>[    1.439205] ata3: DUMMY
>[    1.439213] ata4: DUMMY
>[    1.447138] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
>[    1.447240] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.447627] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.447642] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.447784] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.447797] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.447936] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.447949] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.448129] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.448143] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.448418] usbcore: registered new interface driver zd1201
>[    1.448549] usbcore: registered new interface driver catc
>[    1.448679] usbcore: registered new interface driver kaweth
>[    1.448692] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.448821] usbcore: registered new interface driver pegasus
>[    1.448951] usbcore: registered new interface driver rtl8150
>[    1.449161] usbcore: registered new interface driver asix
>[    1.449297] usbcore: registered new interface driver ax88179_178a
>[    1.449422] usbcore: registered new interface driver cdc_ether
>[    1.449550] usbcore: registered new interface driver r815x
>[    1.449676] usbcore: registered new interface driver dm9601
>[    1.449802] usbcore: registered new interface driver gl620a
>[    1.449931] usbcore: registered new interface driver net1080
>[    1.450081] usbcore: registered new interface driver plusb
>[    1.450215] usbcore: registered new interface driver rndis_host
>[    1.450345] usbcore: registered new interface driver cdc_subset
>[    1.450472] usbcore: registered new interface driver zaurus
>[    1.450599] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.450743] usbcore: registered new interface driver cdc_ncm
>[    1.451386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.451402] ehci-pci: EHCI PCI platform driver
>[    1.451728] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    1.451974] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    1.452123] ehci-pci 0000:00:1d.7: debug port 1
>[    1.456069] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    1.456114] ehci-pci 0000:00:1d.7: irq 16, io mem 0x58204400
>[    1.462047] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.462158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.462176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.462195] usb usb1: Product: EHCI Host Controller
>[    1.462209] usb usb1: Manufacturer: Linux 3.13.0-rc7_drm-intel-fixes_09f234_20140114+ ehci_hcd
>[    1.462228] usb usb1: SerialNumber: 0000:00:1d.7
>[    1.462773] hub 1-0:1.0: USB hub found
>[    1.462820] hub 1-0:1.0: 8 ports detected
>[    1.463924] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.463939] ohci-pci: OHCI PCI platform driver
>[    1.464119] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.464395] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.464640] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.464696] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
>[    1.464955] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.464970] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.464984] usb usb2: Product: UHCI Host Controller
>[    1.464995] usb usb2: Manufacturer: Linux 3.13.0-rc7_drm-intel-fixes_09f234_20140114+ uhci_hcd
>[    1.465034] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.465530] hub 2-0:1.0: USB hub found
>[    1.465575] hub 2-0:1.0: 2 ports detected
>[    1.466126] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.466382] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    1.466462] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
>[    1.466718] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.466733] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.466748] usb usb3: Product: UHCI Host Controller
>[    1.466759] usb usb3: Manufacturer: Linux 3.13.0-rc7_drm-intel-fixes_09f234_20140114+ uhci_hcd
>[    1.466773] usb usb3: SerialNumber: 0000:00:1d.1
>[    1.467272] hub 3-0:1.0: USB hub found
>[    1.467316] hub 3-0:1.0: 2 ports detected
>[    1.467798] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.468095] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    1.468181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
>[    1.468434] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.468448] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.468463] usb usb4: Product: UHCI Host Controller
>[    1.468474] usb usb4: Manufacturer: Linux 3.13.0-rc7_drm-intel-fixes_09f234_20140114+ uhci_hcd
>[    1.468489] usb usb4: SerialNumber: 0000:00:1d.2
>[    1.468988] hub 4-0:1.0: USB hub found
>[    1.469062] hub 4-0:1.0: 2 ports detected
>[    1.469626] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    1.469886] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    1.469966] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
>[    1.470257] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.470272] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.470286] usb usb5: Product: UHCI Host Controller
>[    1.470297] usb usb5: Manufacturer: Linux 3.13.0-rc7_drm-intel-fixes_09f234_20140114+ uhci_hcd
>[    1.470312] usb usb5: SerialNumber: 0000:00:1d.3
>[    1.470824] hub 5-0:1.0: USB hub found
>[    1.470869] hub 5-0:1.0: 2 ports detected
>[    1.471742] usbcore: registered new interface driver usb-storage
>[    1.472070] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>[    1.488512] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.488539] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.488994] mousedev: PS/2 mouse device common for all mice
>[    1.489788] rtc_cmos 00:02: RTC can wake from S4
>[    1.490192] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.490245] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
>[    1.490378] i2c /dev entries driver
>[    1.490714] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.493295] usbcore: registered new interface driver usbhid
>[    1.493309] usbhid: USB HID core driver
>[    1.493460] TCP: cubic registered
>[    1.493469] Initializing XFRM netlink socket
>[    1.493485] NET: Registered protocol family 17
>[    1.493555] Key type dns_resolver registered
>[    1.494445] Using IPI No-Shortcut mode
>[    1.495079] registered taskstats version 1
>[    1.495638]   Magic number: 14:265:5
>[    1.495990] PM: Hibernation image not present or could not be loaded.
>[    1.496141] Warning: unable to open an initial console.
>[    1.506216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.765112] usb 1-4: new high-speed USB device number 2 using ehci-pci
>[    1.882088] usb 1-4: New USB device found, idVendor=090c, idProduct=637b
>[    1.882114] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.882127] usb 1-4: Product: HP Webcam-50
>[    1.882137] usb 1-4: Manufacturer: Image Processor
>[    1.899091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.899823] ata1.00: unexpected _GTF length (4)
>[    1.900040] ata1.00: ATA-8: ST9160412AS, 0006HPM1, max UDMA/100
>[    1.900066] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.900943] ata1.00: unexpected _GTF length (4)
>[    1.901160] ata1.00: configured for UDMA/100
>[    1.901457] scsi 0:0:0:0: Direct-Access     ATA      ST9160412AS      0006 PQ: 0 ANSI: 5
>[    1.902181] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    1.902387] sd 0:0:0:0: [sda] Write Protect is off
>[    1.902403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.902460] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.902609] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.953839]  sda: sda1 sda2
>[    1.955033] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.208090] ata2: SATA link down (SStatus 0 SControl 300)
>[    2.225087] Freeing unused kernel memory: 20192K (c0c2b000 - c1fe3000)
>[    2.342843] usb 5-2: new full-speed USB device number 2 using uhci_hcd
>[    2.354922] dracut: dracut-018-35.git20120510.fc17
>[    2.462268] udevd[1209]: starting version 182
>[    2.493125] usb 5-2: New USB device found, idVendor=1ab7, idProduct=5730
>[    2.493150] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.493172] usb 5-2: Product: Leadcore  HSDPA  
>[    2.493189] usb 5-2: Manufacturer: LeaDcore   Technology   
>[    2.493206] usb 5-2: SerialNumber: 00000000000123456789
>[    2.525730] [drm] Initialized drm 1.1.0 20060810
>[    2.528313] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>[    2.531115] ACPI: Power Button [PWRB]
>[    2.532892] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>[    2.537118] ACPI: Lid Switch [LID0]
>[    2.537727] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    2.538221] ACPI: Power Button [PWRF]
>[    2.554180] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0xa011 flags=is_mobile,is_g33,need_gfx_hws,is_pineview,has_hotplug,has_overlay,
>[    2.554380] [drm:intel_detect_pch], No PCH found?
>[    2.554404] [drm] Memory usable by graphics device = 512M
>[    2.554417] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    2.554424] [drm:i915_gem_gtt_init], GTT stolen size = 8M
>[    2.572627] [drm:intel_opregion_setup], graphic opregion physical addr: 0x3dcb2010
>[    2.572668] [drm:intel_opregion_setup], Public ACPI methods supported
>[    2.572676] [drm:intel_opregion_setup], SWSCI supported
>[    2.580087] [drm:swsci_setup], SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000001)
>[    2.580100] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    2.580108] [drm:intel_opregion_setup], ASLE supported
>[    2.580200] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[    2.580229] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.580249] [drm] Driver supports precise vblank timestamp query.
>[    2.580266] [drm:init_vbt_defaults], Set default to SSC at 100MHz
>[    2.580275] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT PINEVIEW       d
>[    2.580283] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.580293] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    2.580304] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    2.580311] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 0 54200 1024 1048 1184 1438 600 603 604 628 0x8 0xa
>[    2.580324] [drm:parse_lfp_panel_data], VBT initial LVDS value 40300300
>[    2.580335] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    2.580341] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.580354] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    2.580362] [drm:parse_mipi], No MIPI BDB found
>[    2.580383] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    2.580412] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 3f800000
>[    2.580504] [drm:intel_modeset_init], 2 display pipes available.
>[    2.580529] [drm:intel_crtc_init], swapping pipes & planes for FBC
>[    2.580536] [drm:intel_modeset_init], pipe A sprite A init failed: -19
>[    2.580558] [drm:intel_crtc_init], swapping pipes & planes for FBC
>[    2.580564] [drm:intel_modeset_init], pipe B sprite B init failed: -19
>[    2.580571] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
>[    2.580583] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.608075] [drm:intel_lvds_init], using preferred mode from EDID: 
>[    2.608086] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[    2.608121] [drm:intel_lvds_init], detected single-link lvds configuration
>[    2.609153] [drm:intel_panel_get_backlight], get backlight PWM = 0
>[    2.609163] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
>[    2.610823] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 1ffff000]
>[    2.614202] [drm:init_status_page], render ring hws offset: 0x00001000
>[    2.614212] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[    2.614221] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[    2.614303] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[    2.614316] [drm:i915_gem_object_create_stolen], creating stolen object: size=1000
>[    2.614325] [drm:i915_pages_create_for_stolen], offset=0x20000, size=4096
>[    2.614357] [drm] initialized overlay support
>[    2.614379] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[    2.614396] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
>[    2.614407] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
>[    2.614413] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe A
>[    2.614420] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
>[    2.614427] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled
>[    2.614434] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    2.614439] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[    2.614443] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.614448] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.614454] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.614459] [drm:intel_dump_pipe_config], requested mode:
>[    2.614464] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.614471] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.614475] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.614482] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.614488] [drm:intel_dump_pipe_config], port clock: 0
>[    2.614492] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    2.614497] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.614502] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.614507] [drm:intel_dump_pipe_config], ips: 0
>[    2.614511] [drm:intel_dump_pipe_config], double wide: 0
>[    2.614516] [drm:intel_sanitize_crtc], [CRTC:4] wrong plane connection detected!
>[    2.614522] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    2.642442] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 627142
>[    2.711216] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>[    2.917062] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00002668
>[    2.917075] [drm:pineview_update_wm], Self-refresh is disabled
>[    2.917083] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
>[    2.917088] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    2.917092] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.917097] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.917103] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.917108] [drm:intel_dump_pipe_config], requested mode:
>[    2.917113] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 600 0 0 0 0x0 0x0
>[    2.917120] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.917124] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    2.917131] [drm:intel_dump_crtc_timings], crtc timings: 54018 1024 1048 1184 1438 600 603 604 628, type: 0x0 flags: 0xa
>[    2.917139] [drm:intel_dump_pipe_config], port clock: 54018
>[    2.917143] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[    2.917148] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[    2.917153] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.917158] [drm:intel_dump_pipe_config], ips: 0
>[    2.917162] [drm:intel_dump_pipe_config], double wide: 0
>[    2.917169] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[    2.917175] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[    2.917180] [drm:check_crtc_state], [CRTC:3]
>[    2.917186] [drm:check_crtc_state], [CRTC:4]
>[    2.917202] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[    2.917207] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[    2.917227] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[    2.917232] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[    2.917242] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    2.917247] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[    2.931061] [drm:intel_crt_detect], CRT not detected via hotplug
>[    2.932057] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.932069] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.932081] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.932086] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.932372] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.932377] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.932382] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.932387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    2.932393] [drm:drm_setup_crtcs], 
>[    2.932397] [drm:drm_enable_connectors], connector 5 enabled? yes
>[    2.932402] [drm:drm_enable_connectors], connector 11 enabled? no
>[    2.932406] [drm:drm_target_preferred], looking for cmdline mode on connector 5
>[    2.932411] [drm:drm_target_preferred], looking for preferred mode on connector 5
>[    2.932415] [drm:drm_target_preferred], found mode 1024x600
>[    2.932419] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
>[    2.932425] [drm:drm_setup_crtcs], desired mode 1024x600 set on crtc 4
>[    2.932433] [drm:i915_gem_object_create_stolen], creating stolen object: size=258000
>[    2.932440] [drm:i915_pages_create_for_stolen], offset=0x21000, size=2457600
>[    2.935476] [drm:intelfb_create], allocated 1024x600 fb: 0x00030000, bo f6b77300
>[    2.935784] fbcon: inteldrmfb (fb0) is primary device
>[    2.936117] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[    2.936125] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.936134] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    2.936138] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[    2.936142] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    2.936151] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.936161] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[    2.936166] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[    2.936170] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[    2.936177] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    2.936181] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[    2.936188] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    2.936198] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[    2.936206] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[    2.936216] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    2.936221] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[    2.936225] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    2.936229] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    2.936236] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.936242] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.936246] [drm:intel_dump_pipe_config], requested mode:
>[    2.936255] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[    2.936258] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.936267] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[    2.936276] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[    2.936280] [drm:intel_dump_pipe_config], port clock: 54200
>[    2.936284] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[    2.936290] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[    2.936295] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.936298] [drm:intel_dump_pipe_config], ips: 0
>[    2.936302] [drm:intel_dump_pipe_config], double wide: 0
>[    2.936312] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[    2.938116] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 4096
>[    2.938124] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[    2.938823] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[    2.938826] [drm:intel_calculate_wm], FIFO watermark level: 490
>[    2.938829] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[    2.938832] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[    2.938835] [drm:intel_calculate_wm], FIFO watermark level: 493
>[    2.938838] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[    2.938841] [drm:intel_calculate_wm], FIFO watermark level: 389
>[    2.938844] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[    2.938847] [drm:intel_calculate_wm], FIFO watermark level: 392
>[    2.938850] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[    2.938853] [drm:pineview_update_wm], Self-refresh is enabled
>[    3.302043] [drm:intel_panel_enable_backlight], pipe B
>[    3.302049] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
>[    3.302053] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[    3.302063] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.302069] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[    3.302074] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[    3.302079] [drm:check_crtc_state], [CRTC:3]
>[    3.302083] [drm:check_crtc_state], [CRTC:4]
>[    3.302104] Console: switching to colour frame buffer device 128x37
>[    3.302126] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.302132] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.302138] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.311334] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.311477] i915 0000:00:02.0: registered panic notifier
>[    3.318422] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
>[    3.324092] acpi device:24: registered as cooling_device2
>[    3.324677] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    3.325387] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    3.340348] dracut: Starting plymouth daemon
>[    3.363138] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.363147] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.363152] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.380086] [drm:i915_gem_open], 
>[    3.380126] [drm:intel_crtc_cursor_set], cursor off
>[    3.380132] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[    3.380139] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    3.380146] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.380152] [drm:intel_crtc_cursor_set], cursor off
>[    3.380157] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.380165] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.380171] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.380197] [drm:i915_gem_open], 
>[    3.380219] [drm:intel_crtc_cursor_set], cursor off
>[    3.380224] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[    3.380229] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    3.380235] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.380240] [drm:intel_crtc_cursor_set], cursor off
>[    3.380244] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.380251] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.380257] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.380280] [drm:i915_gem_open], 
>[    3.380449] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[    3.380459] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[    3.380478] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[    3.380485] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[    3.380491] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[    3.380511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[    3.380516] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[    3.380529] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[    3.385570] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[    3.385584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    3.385590] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[    3.399060] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.400058] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.400071] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.400083] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.400087] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.400374] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.400379] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.400384] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.400389] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    3.400405] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[    3.400410] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    3.400416] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[    3.414058] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.415058] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.415070] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.415082] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.415086] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.415371] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.415375] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.415380] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.415385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    3.432978] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    3.432986] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    3.432992] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    3.718162] ACPI: AC Adapter [ACAD] (on-line)
>[    3.767253] ACPI: Battery Slot [BAT0] (battery present)
>[    3.775735] wmi: Mapper loaded
>[    3.793568] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    3.805224] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    3.811092] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
>[    3.812515] r8169 0000:01:00.0 eth0: RTL8102e at 0xf870c000, c8:0a:a9:2a:71:d3, XID 04e00000 IRQ 44
>[    3.819303] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[    3.840899] ALSA sound/pci/hda/patch_sigmatel.c:2059 mute LED gpio 1 polarity 0
>[    3.841150] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
>[    3.841160] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    3.841169] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
>[    3.841175] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    3.841181] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    3.841189] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x11
>[    3.841197] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0xa
>[    3.861083] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
>[    3.864880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.894805] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[    3.895306] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
>[    3.895311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.895323] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
>[    3.895326] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.895328] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    3.895729] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    3.939149] iTCO_vendor_support: vendor-support=0
>[    3.951810] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    3.960540] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
>[    3.972979] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    4.040599] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[    4.040610] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[    4.040618] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[    4.330665] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.372847] random: nonblocking pool is initialized
>[    4.521120] dracut: Checking ext4: /dev/sda2
>[    4.525741] dracut: issuing e2fsck -a  /dev/sda2
>[    4.703089] dracut: /dev/sda2: clean, 1717354/9641984 files, 24539825/38560256 blocks
>[    4.708722] dracut: Remounting /dev/sda2 with -o ro
>[    4.750185] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.869974] dracut: Mounted root filesystem /dev/sda2
>[    5.079658] device-mapper: uevent: version 1.0.3
>[    5.084534] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    5.271430] dracut: Switching root
>[    9.993223] udevd[2253]: starting version 182
>[   10.954893] EXT4-fs (sda2): re-mounted. Opts: (null)
>[   15.209231] Adding 2047996k swap on /dev/sda1.  Priority:0 extents:1 across:2047996k 
>[   18.168879] watchdog (3171): /proc/3171/oom_adj is deprecated, please use /proc/3171/oom_score_adj instead.
>[   18.501458] [drm:intel_crtc_cursor_set], cursor off
>[   18.501471] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[   18.501483] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   18.501494] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   18.501503] [drm:intel_crtc_cursor_set], cursor off
>[   18.501510] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[   18.501522] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[   18.501530] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   18.943242] r8169 0000:01:00.0 em1: link down
>[   18.947072] r8169 0000:01:00.0 em1: link down
>[   20.570365] r8169 0000:01:00.0 em1: link up
>[   58.314139] NET: Registered protocol family 10
>[   90.017322] [drm:i915_gem_open], 
>[   90.017381] [drm:intel_crtc_cursor_set], cursor off
>[   90.017390] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[   90.017400] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   90.017409] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   90.017418] [drm:intel_crtc_cursor_set], cursor off
>[   90.017424] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[   90.017434] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[   90.017442] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   90.017474] [drm:i915_gem_open], 
>[   90.017718] [drm:i915_drop_caches_set], Dropping caches: 0x00000004
>[   90.018426] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018457] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018491] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018505] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018519] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.018527] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[   90.018533] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[   90.018553] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[   90.018561] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[   90.018578] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.018608] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018620] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018630] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.018635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[   90.018640] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[   90.018654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[   90.018659] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[   90.018671] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.018691] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018700] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018724] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018734] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.018743] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[   90.018749] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[   90.018755] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[   90.032057] [drm:intel_crt_detect], CRT not detected via hotplug
>[   90.033091] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   90.033101] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.033108] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   90.033115] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   90.033426] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.033433] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   90.033438] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   90.033444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[   90.033458] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[   90.033464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[   90.033469] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[   90.047063] [drm:intel_crt_detect], CRT not detected via hotplug
>[   90.048086] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   90.048096] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.048104] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   90.048110] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   90.048406] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.048413] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   90.048418] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   90.048424] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[   90.048442] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.048451] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.048461] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[   90.048467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[   90.048472] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[   90.062064] [drm:intel_crt_detect], CRT not detected via hotplug
>[   90.063086] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   90.063096] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.063103] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   90.063110] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   90.063438] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.063444] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   90.063450] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   90.063455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[   90.063466] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[   90.063472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[   90.063477] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[   90.077056] [drm:intel_crt_detect], CRT not detected via hotplug
>[   90.078091] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   90.078101] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.078108] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   90.078115] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   90.078424] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   90.078430] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   90.078435] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   90.078441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[   90.078558] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.078568] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.078579] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.078584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[   90.078590] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[   90.078607] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[   90.078613] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[   90.078626] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.078658] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.078668] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.078678] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.078683] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[   90.078688] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
>[   90.078701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[   90.078706] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[   90.078719] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[   90.078733] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.078742] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   90.078860] [drm:drm_mode_addfb], [FB:15]
>[   90.078885] [drm:drm_mode_addfb], [FB:16]
>[   90.078913] [drm:drm_mode_addfb], [FB:17]
>[   90.879930] [drm:drm_mode_setcrtc], [CRTC:4]
>[   90.879953] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[   90.879961] [drm:intel_crtc_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
>[   90.879973] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
>[   90.879984] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   90.880091] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
>[   90.900081] [drm:drm_mode_setcrtc], [CRTC:4]
>[   90.900094] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[   90.900100] [drm:intel_crtc_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
>[   90.900107] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
>[   90.900114] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   90.900123] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
>[   90.952063] [drm:intel_wait_for_vblank], vblank wait timed out
>[   90.952208] [drm:i915_gem_open], 
>[   90.952280] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[   90.952390] [drm:drm_mode_setcrtc], [CRTC:4]
>[   90.952397] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   90.952403] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[   90.952410] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[   90.952415] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[   90.952419] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[   90.952425] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[   90.952433] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[   96.707038] [drm] stuck on render ring
>[   96.707062] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[   96.707069] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[   96.707084] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[   96.707092] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[   96.707097] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[   96.711506] [drm:i915_error_work_func], resetting chip
>[   96.711707] [drm] Simulated gpu hang, resetting stop_rings
>[   96.711718] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[   96.711762] [drm:init_status_page], render ring hws offset: 0x00001000
>[   96.711772] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[   96.711781] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[   96.711863] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[   96.711873] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[   96.741068] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[   96.741083] [drm:pineview_update_wm], Self-refresh is disabled
>[   96.741098] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[   96.741104] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[   96.741109] [drm:check_crtc_state], [CRTC:3]
>[   96.741115] [drm:check_crtc_state], [CRTC:4]
>[   96.741289] [drm:i915_gem_open], 
>[   96.741349] [drm:i915_error_state_write], Resetting error state
>[   96.742495] [drm:drm_mode_setcrtc], [CRTC:4]
>[   96.742516] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[   96.742524] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[   96.742535] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[   96.742542] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[   96.742551] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[   96.742558] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[   96.742565] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[   96.742574] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[   96.742587] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[   96.742596] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[   96.742609] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[   96.742618] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[   96.742625] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[   96.742631] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[   96.742638] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   96.742646] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   96.742654] [drm:intel_dump_pipe_config], requested mode:
>[   96.742660] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[   96.742672] [drm:intel_dump_pipe_config], adjusted mode:
>[   96.742678] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[   96.742689] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[   96.742699] [drm:intel_dump_pipe_config], port clock: 54200
>[   96.742704] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[   96.742711] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[   96.742718] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   96.742725] [drm:intel_dump_pipe_config], ips: 0
>[   96.742730] [drm:intel_dump_pipe_config], double wide: 0
>[   96.742743] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[   96.744976] [drm:i9xx_update_plane], Writing base 004E0000 00000000 0 0 4096
>[   96.744997] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[   96.745774] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[   96.745783] [drm:intel_calculate_wm], FIFO watermark level: 490
>[   96.745791] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[   96.745797] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[   96.745804] [drm:intel_calculate_wm], FIFO watermark level: 493
>[   96.745811] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[   96.745817] [drm:intel_calculate_wm], FIFO watermark level: 389
>[   96.745824] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[   96.745830] [drm:intel_calculate_wm], FIFO watermark level: 392
>[   96.745837] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[   96.745844] [drm:pineview_update_wm], Self-refresh is enabled
>[   96.765064] [drm:intel_panel_enable_backlight], pipe B
>[   96.765082] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[   96.765094] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[   96.765101] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[   96.765107] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[   96.765113] [drm:check_crtc_state], [CRTC:3]
>[   96.765118] [drm:check_crtc_state], [CRTC:4]
>[   96.765245] [drm:i915_gem_open], 
>[   96.765308] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[   96.765429] [drm:drm_mode_setcrtc], [CRTC:4]
>[   96.765438] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   96.765445] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[   96.765451] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[   96.765456] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[   96.765461] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[   96.765467] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[   96.765474] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  100.703045] [drm] stuck on render ring
>[  100.703067] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  100.703072] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  100.703078] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  100.703083] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  100.703088] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  100.707605] [drm:i915_error_work_func], resetting chip
>[  100.707957] [drm] Simulated gpu hang, resetting stop_rings
>[  100.707968] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  100.708054] [drm:init_status_page], render ring hws offset: 0x00001000
>[  100.708064] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  100.708073] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  100.708155] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  100.708164] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  100.749058] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  100.749073] [drm:pineview_update_wm], Self-refresh is disabled
>[  100.749087] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  100.749093] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  100.749099] [drm:check_crtc_state], [CRTC:3]
>[  100.749104] [drm:check_crtc_state], [CRTC:4]
>[  100.749461] [drm:i915_gem_open], 
>[  100.749518] [drm:i915_error_state_write], Resetting error state
>[  100.749586] [drm:drm_mode_setcrtc], [CRTC:4]
>[  100.749602] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  100.749610] [drm:intel_crtc_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
>[  100.749621] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  100.749628] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  100.749637] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  100.749644] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  100.749652] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  100.749661] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  100.749673] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  100.749683] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  100.749696] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  100.749705] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  100.749712] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  100.749718] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  100.749725] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  100.749735] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  100.749743] [drm:intel_dump_pipe_config], requested mode:
>[  100.749749] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  100.749761] [drm:intel_dump_pipe_config], adjusted mode:
>[  100.749767] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  100.749779] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  100.749790] [drm:intel_dump_pipe_config], port clock: 54200
>[  100.749796] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  100.749803] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  100.749810] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  100.749816] [drm:intel_dump_pipe_config], ips: 0
>[  100.749822] [drm:intel_dump_pipe_config], double wide: 0
>[  100.749834] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  100.752080] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
>[  100.752101] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  100.752824] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  100.752835] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  100.752843] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  100.752850] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  100.752857] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  100.752864] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  100.752871] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  100.752878] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  100.752885] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  100.752892] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  100.752899] [drm:pineview_update_wm], Self-refresh is enabled
>[  100.772047] [drm:intel_panel_enable_backlight], pipe B
>[  100.772057] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  100.772071] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  100.772079] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  100.772087] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  100.772093] [drm:check_crtc_state], [CRTC:3]
>[  100.772101] [drm:check_crtc_state], [CRTC:4]
>[  100.772229] [drm:i915_gem_open], 
>[  100.772292] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[  100.772412] [drm:drm_mode_setcrtc], [CRTC:4]
>[  100.772420] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[  100.772427] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  100.772434] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[  100.772439] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  100.772443] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  100.772449] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  100.772456] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  104.707052] [drm] stuck on render ring
>[  104.707084] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  104.707089] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  104.707093] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  104.707097] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  104.707101] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  104.711631] [drm:i915_error_work_func], resetting chip
>[  104.711916] [drm] Simulated gpu hang, resetting stop_rings
>[  104.711925] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  104.711966] [drm:init_status_page], render ring hws offset: 0x00001000
>[  104.711973] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  104.711980] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  104.712091] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  104.712100] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  104.735050] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  104.735064] [drm:pineview_update_wm], Self-refresh is disabled
>[  104.735079] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  104.735085] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  104.735090] [drm:check_crtc_state], [CRTC:3]
>[  104.735096] [drm:check_crtc_state], [CRTC:4]
>[  104.735305] [drm:i915_gem_open], 
>[  104.735367] [drm:i915_error_state_write], Resetting error state
>[  104.735437] [drm:drm_mode_setcrtc], [CRTC:4]
>[  104.735453] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  104.735461] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[  104.735471] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  104.735479] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  104.735487] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  104.735494] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  104.735502] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  104.735510] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  104.735523] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  104.735532] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  104.735545] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  104.735553] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  104.735560] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  104.735566] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  104.735572] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  104.735581] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  104.735590] [drm:intel_dump_pipe_config], requested mode:
>[  104.735596] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  104.735609] [drm:intel_dump_pipe_config], adjusted mode:
>[  104.735614] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  104.735626] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  104.735638] [drm:intel_dump_pipe_config], port clock: 54200
>[  104.735643] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  104.735650] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  104.735659] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  104.735666] [drm:intel_dump_pipe_config], ips: 0
>[  104.735672] [drm:intel_dump_pipe_config], double wide: 0
>[  104.735683] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  104.737900] [drm:i9xx_update_plane], Writing base 004E0000 00000000 0 0 4096
>[  104.737919] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  104.738646] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  104.738658] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  104.738666] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  104.738673] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  104.738679] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  104.738687] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  104.738693] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  104.738700] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  104.738707] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  104.738713] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  104.738720] [drm:pineview_update_wm], Self-refresh is enabled
>[  104.759043] [drm:intel_panel_enable_backlight], pipe B
>[  104.759053] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  104.759067] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  104.759076] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  104.759083] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  104.759090] [drm:check_crtc_state], [CRTC:3]
>[  104.759097] [drm:check_crtc_state], [CRTC:4]
>[  104.759222] [drm:i915_gem_open], 
>[  104.759285] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[  104.759391] [drm:drm_mode_setcrtc], [CRTC:4]
>[  104.759399] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[  104.759407] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  104.759416] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[  104.759424] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  104.759430] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  104.759436] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  104.759444] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  108.707024] [drm] stuck on render ring
>[  108.707046] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  108.707052] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  108.707057] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  108.707063] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  108.707075] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  108.711461] [drm:i915_error_work_func], resetting chip
>[  108.711678] [drm] Simulated gpu hang, resetting stop_rings
>[  108.711689] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  108.711735] [drm:init_status_page], render ring hws offset: 0x00001000
>[  108.711744] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  108.711754] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  108.711832] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  108.711842] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  108.744050] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  108.744065] [drm:pineview_update_wm], Self-refresh is disabled
>[  108.744080] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  108.744086] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  108.744091] [drm:check_crtc_state], [CRTC:3]
>[  108.744097] [drm:check_crtc_state], [CRTC:4]
>[  108.744442] [drm:i915_gem_open], 
>[  108.744501] [drm:i915_error_state_write], Resetting error state
>[  108.744569] [drm:drm_mode_setcrtc], [CRTC:4]
>[  108.744584] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  108.744592] [drm:intel_crtc_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
>[  108.744603] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  108.744611] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  108.744620] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  108.744627] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  108.744634] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  108.744644] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  108.744657] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  108.744667] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  108.744679] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  108.744688] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  108.744695] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  108.744702] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  108.744709] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  108.744718] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  108.744726] [drm:intel_dump_pipe_config], requested mode:
>[  108.744732] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  108.744745] [drm:intel_dump_pipe_config], adjusted mode:
>[  108.744751] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  108.744763] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  108.744774] [drm:intel_dump_pipe_config], port clock: 54200
>[  108.744780] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  108.744786] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  108.744793] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  108.744800] [drm:intel_dump_pipe_config], ips: 0
>[  108.744806] [drm:intel_dump_pipe_config], double wide: 0
>[  108.744818] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  108.747068] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
>[  108.747088] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  108.747813] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  108.747824] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  108.747832] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  108.747839] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  108.747846] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  108.747853] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  108.747860] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  108.747867] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  108.747873] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  108.747880] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  108.747887] [drm:pineview_update_wm], Self-refresh is enabled
>[  108.767043] [drm:intel_panel_enable_backlight], pipe B
>[  108.767054] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  108.767068] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  108.767076] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  108.767083] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  108.767090] [drm:check_crtc_state], [CRTC:3]
>[  108.767097] [drm:check_crtc_state], [CRTC:4]
>[  108.767223] [drm:i915_gem_open], 
>[  108.767285] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[  108.767394] [drm:drm_mode_setcrtc], [CRTC:4]
>[  108.767403] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[  108.767410] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  108.767419] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[  108.767425] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  108.767431] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  108.767438] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  108.767445] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  112.703069] [drm] stuck on render ring
>[  112.703098] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  112.703103] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  112.703107] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  112.703110] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  112.703114] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  112.709144] [drm:i915_error_work_func], resetting chip
>[  112.709344] [drm] Simulated gpu hang, resetting stop_rings
>[  112.709353] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  112.709401] [drm:init_status_page], render ring hws offset: 0x00001000
>[  112.709409] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  112.709417] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  112.709488] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  112.709497] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  112.735056] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  112.735070] [drm:pineview_update_wm], Self-refresh is disabled
>[  112.735085] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  112.735091] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  112.735096] [drm:check_crtc_state], [CRTC:3]
>[  112.735102] [drm:check_crtc_state], [CRTC:4]
>[  112.735308] [drm:i915_gem_open], 
>[  112.736459] [drm:i915_error_state_write], Resetting error state
>[  112.736532] [drm:drm_mode_setcrtc], [CRTC:4]
>[  112.736549] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  112.736556] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[  112.736567] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  112.736574] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  112.736582] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  112.736589] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  112.736596] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  112.736604] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  112.736617] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  112.736626] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  112.736639] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  112.736647] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  112.736654] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  112.736660] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  112.736667] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  112.736676] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  112.736684] [drm:intel_dump_pipe_config], requested mode:
>[  112.736690] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  112.736702] [drm:intel_dump_pipe_config], adjusted mode:
>[  112.736708] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  112.736721] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  112.736731] [drm:intel_dump_pipe_config], port clock: 54200
>[  112.736737] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  112.736743] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  112.736751] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  112.736757] [drm:intel_dump_pipe_config], ips: 0
>[  112.736763] [drm:intel_dump_pipe_config], double wide: 0
>[  112.736775] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  112.738999] [drm:i9xx_update_plane], Writing base 004E0000 00000000 0 0 4096
>[  112.739057] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  112.739788] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  112.739799] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  112.739806] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  112.739812] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  112.739818] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  112.739825] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  112.739831] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  112.739837] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  112.739843] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  112.739850] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  112.739857] [drm:pineview_update_wm], Self-refresh is enabled
>[  112.759042] [drm:intel_panel_enable_backlight], pipe B
>[  112.759051] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  112.759065] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  112.759073] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  112.759081] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  112.759087] [drm:check_crtc_state], [CRTC:3]
>[  112.759094] [drm:check_crtc_state], [CRTC:4]
>[  112.759229] [drm:i915_gem_open], 
>[  112.759292] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[  112.759399] [drm:drm_mode_setcrtc], [CRTC:4]
>[  112.759409] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[  112.759417] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  112.759426] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[  112.759432] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  112.759436] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  112.759443] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  112.759450] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  116.707025] [drm] stuck on render ring
>[  116.707047] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  116.707053] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  116.707058] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  116.707064] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  116.707079] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  116.711478] [drm:i915_error_work_func], resetting chip
>[  116.713127] [drm] Simulated gpu hang, resetting stop_rings
>[  116.713141] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  116.713184] [drm:init_status_page], render ring hws offset: 0x00001000
>[  116.713194] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  116.713204] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  116.713282] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  116.713292] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  116.745049] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  116.745065] [drm:pineview_update_wm], Self-refresh is disabled
>[  116.745081] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  116.745089] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  116.745096] [drm:check_crtc_state], [CRTC:3]
>[  116.745102] [drm:check_crtc_state], [CRTC:4]
>[  116.745450] [drm:i915_gem_open], 
>[  116.745507] [drm:i915_error_state_write], Resetting error state
>[  116.745575] [drm:drm_mode_setcrtc], [CRTC:4]
>[  116.745591] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  116.745599] [drm:intel_crtc_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
>[  116.745610] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  116.745617] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  116.745626] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  116.745633] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  116.745640] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  116.745650] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  116.745662] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  116.745672] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  116.745685] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  116.745694] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  116.745701] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  116.745707] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  116.745714] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  116.745724] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  116.745732] [drm:intel_dump_pipe_config], requested mode:
>[  116.745738] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  116.745750] [drm:intel_dump_pipe_config], adjusted mode:
>[  116.745756] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  116.745769] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  116.745779] [drm:intel_dump_pipe_config], port clock: 54200
>[  116.745785] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  116.745792] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  116.745799] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  116.745806] [drm:intel_dump_pipe_config], ips: 0
>[  116.745812] [drm:intel_dump_pipe_config], double wide: 0
>[  116.745824] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  116.748076] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
>[  116.748096] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  116.748819] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  116.748830] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  116.748837] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  116.748845] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  116.748851] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  116.748859] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  116.748865] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  116.748872] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  116.748879] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  116.748886] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  116.748893] [drm:pineview_update_wm], Self-refresh is enabled
>[  116.768081] [drm:intel_panel_enable_backlight], pipe B
>[  116.768090] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  116.768102] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  116.768109] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  116.768115] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  116.768120] [drm:check_crtc_state], [CRTC:3]
>[  116.768126] [drm:check_crtc_state], [CRTC:4]
>[  116.768251] [drm:i915_gem_open], 
>[  116.768314] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[  116.768434] [drm:drm_mode_setcrtc], [CRTC:4]
>[  116.768443] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[  116.768450] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  116.768457] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[  116.768462] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  116.768466] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  116.768472] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  116.768480] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  120.703044] [drm] stuck on render ring
>[  120.703067] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  120.703072] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  120.703077] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  120.703083] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  120.703088] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  120.707720] [drm:i915_error_work_func], resetting chip
>[  120.708054] [drm] Simulated gpu hang, resetting stop_rings
>[  120.708070] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  120.708125] [drm:init_status_page], render ring hws offset: 0x00001000
>[  120.708134] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  120.708143] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  120.708225] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  120.708236] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  120.737077] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  120.737091] [drm:pineview_update_wm], Self-refresh is disabled
>[  120.737106] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  120.737112] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  120.737117] [drm:check_crtc_state], [CRTC:3]
>[  120.737123] [drm:check_crtc_state], [CRTC:4]
>[  120.737477] [drm:i915_gem_open], 
>[  120.737534] [drm:i915_error_state_write], Resetting error state
>[  120.737599] [drm:drm_mode_setcrtc], [CRTC:4]
>[  120.737615] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  120.737623] [drm:intel_crtc_set_config], [CRTC:4] [FB:16] #connectors=1 (x y) (0 0)
>[  120.737634] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  120.737641] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  120.737649] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  120.737657] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  120.737665] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  120.737674] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  120.737687] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  120.737697] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  120.737710] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  120.737718] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  120.737726] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  120.737732] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  120.737739] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  120.737749] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  120.737756] [drm:intel_dump_pipe_config], requested mode:
>[  120.737763] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  120.737775] [drm:intel_dump_pipe_config], adjusted mode:
>[  120.737781] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  120.737793] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  120.737804] [drm:intel_dump_pipe_config], port clock: 54200
>[  120.737810] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  120.737816] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  120.737823] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  120.737831] [drm:intel_dump_pipe_config], ips: 0
>[  120.737837] [drm:intel_dump_pipe_config], double wide: 0
>[  120.737848] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  120.742331] [drm:i9xx_update_plane], Writing base 004E0000 00000000 0 0 4096
>[  120.742352] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  120.743094] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  120.743102] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  120.743110] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  120.743117] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  120.743123] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  120.743131] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  120.743137] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  120.743144] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  120.743151] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  120.743158] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  120.743166] [drm:pineview_update_wm], Self-refresh is enabled
>[  120.763063] [drm:intel_panel_enable_backlight], pipe B
>[  120.763080] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  120.763091] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  120.763098] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  120.763104] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  120.763110] [drm:check_crtc_state], [CRTC:3]
>[  120.763116] [drm:check_crtc_state], [CRTC:4]
>[  120.763211] [drm:i915_gem_open], 
>[  120.763260] [drm:i915_ring_stop_set], Stopping rings 0x0000000f
>[  120.763341] [drm:drm_mode_setcrtc], [CRTC:4]
>[  120.763347] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[  120.763353] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  120.763359] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [NOCRTC]
>[  120.763364] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  120.763369] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  120.763375] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  120.763382] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  124.707021] [drm] stuck on render ring
>[  124.707039] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  124.707044] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  124.707048] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  124.707052] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  124.707055] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  124.711399] [drm:i915_error_work_func], resetting chip
>[  124.711596] [drm] Simulated gpu hang, resetting stop_rings
>[  124.711608] [drm:i915_reset] *ERROR* Reset not implemented, but ignoring error for simulated gpu hangs
>[  124.711653] [drm:init_status_page], render ring hws offset: 0x00001000
>[  124.711663] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>[  124.711672] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
>[  124.711753] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
>[  124.711764] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  124.747051] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
>[  124.747065] [drm:pineview_update_wm], Self-refresh is disabled
>[  124.747080] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  124.747086] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  124.747091] [drm:check_crtc_state], [CRTC:3]
>[  124.747097] [drm:check_crtc_state], [CRTC:4]
>[  124.747451] [drm:i915_gem_open], 
>[  124.747509] [drm:i915_error_state_write], Resetting error state
>[  124.757437] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  124.757453] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  124.757466] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  124.757474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  124.757480] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  124.771041] [drm:intel_crt_detect], CRT not detected via hotplug
>[  124.772053] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  124.772065] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.772072] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  124.772079] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  124.772378] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.772385] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  124.772390] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  124.772397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  124.772410] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  124.772416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  124.772421] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  124.786056] [drm:intel_crt_detect], CRT not detected via hotplug
>[  124.787092] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  124.787102] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.787109] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  124.787116] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  124.787425] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.787432] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  124.787437] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  124.787443] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  124.787471] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  124.787481] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
>[  124.787491] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  124.787497] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  124.787502] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  124.801057] [drm:intel_crt_detect], CRT not detected via hotplug
>[  124.802091] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  124.802102] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.802109] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  124.802115] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  124.802423] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.802430] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  124.802435] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  124.802441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  124.802451] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  124.802457] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  124.802463] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
>[  124.816063] [drm:intel_crt_detect], CRT not detected via hotplug
>[  124.817086] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  124.817095] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.817103] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  124.817109] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  124.817407] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  124.817413] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  124.817419] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  124.817425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  124.821319] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  124.821327] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  124.821333] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  124.821336] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  124.821341] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
>[  124.821344] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  124.821349] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  124.821352] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  124.821358] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  124.821365] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
>[  124.821371] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
>[  124.821379] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  124.821383] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>[  124.821386] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  124.821389] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  124.821393] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821397] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821400] [drm:intel_dump_pipe_config], requested mode:
>[  124.821407] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  124.821410] [drm:intel_dump_pipe_config], adjusted mode:
>[  124.821416] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 54200 1024 1048 1184 1438 600 603 604 628 0x48 0xa
>[  124.821422] [drm:intel_dump_crtc_timings], crtc timings: 54200 1024 1048 1184 1438 600 603 604 628, type: 0x48 flags: 0xa
>[  124.821425] [drm:intel_dump_pipe_config], port clock: 54200
>[  124.821428] [drm:intel_dump_pipe_config], pipe src size: 1024x600
>[  124.821432] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
>[  124.821435] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  124.821438] [drm:intel_dump_pipe_config], ips: 0
>[  124.821440] [drm:intel_dump_pipe_config], double wide: 0
>[  124.821448] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[  124.823190] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 4096
>[  124.823197] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
>[  124.823895] [drm:intel_calculate_wm], FIFO entries required for mode: 12
>[  124.823898] [drm:intel_calculate_wm], FIFO watermark level: 490
>[  124.823901] [drm:pineview_update_wm], DSPFW1 register is f5030f0f
>[  124.823904] [drm:intel_calculate_wm], FIFO entries required for mode: 14
>[  124.823907] [drm:intel_calculate_wm], FIFO watermark level: 493
>[  124.823910] [drm:intel_calculate_wm], FIFO entries required for mode: 113
>[  124.823913] [drm:intel_calculate_wm], FIFO watermark level: 389
>[  124.823916] [drm:intel_calculate_wm], FIFO entries required for mode: 115
>[  124.823919] [drm:intel_calculate_wm], FIFO watermark level: 392
>[  124.823922] [drm:pineview_update_wm], DSPFW3 register is 3f3f0185
>[  124.823925] [drm:pineview_update_wm], Self-refresh is enabled
>[  124.843047] [drm:intel_panel_enable_backlight], pipe B
>[  124.843052] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
>[  124.843062] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[  124.843068] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
>[  124.843073] [drm:check_encoder_state], [ENCODER:12:DAC-12]
>[  124.843078] [drm:check_crtc_state], [CRTC:3]
>[  124.843082] [drm:check_crtc_state], [CRTC:4]
>[  124.843099] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  124.843105] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[  124.843111] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  124.843135] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  124.843141] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[  124.843146] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  124.852233] [drm:i915_gem_open], 
>[  124.852270] [drm:i915_gem_open], 
>[  124.852446] [drm:i915_drop_caches_set], Dropping caches: 0x00000004
>[  124.853397] [drm:intel_crtc_cursor_set], cursor off
>[  124.853408] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  124.853418] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  124.853429] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  124.853439] [drm:intel_crtc_cursor_set], cursor off
>[  124.853446] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
>[  124.853458] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>[  124.853468] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]

Actions: View

Attachments on bug 73639: 92105

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.