Attachment 9439 Details for Bug 10467 – my dmesg

my dmesg

dmesg (text/plain), 16.72 KB, created by Samuel Thibault on 2007-04-02 12:19:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Samuel Thibault

Created: 2007-04-02 12:19:30 UTC

Size: 16.72 KB

patch

obsolete

>Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:17:36 UTC 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002767e000 (usable)
> BIOS-e820: 000000002767e000 - 00000000276e0000 (ACPI NVS)
> BIOS-e820: 00000000276e0000 - 00000000276eb000 (ACPI data)
> BIOS-e820: 00000000276eb000 - 0000000027700000 (ACPI NVS)
> BIOS-e820: 0000000027700000 - 0000000028000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>630MB LOWMEM available.
>On node 0 totalpages: 161406
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 157310 pages, LIFO batch:31
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x000f5ea0
>ACPI: RSDT (v001 DELL   Montara  0x06040000  LTP 0x00000000) @ 0x276e4e2e
>ACPI: FADT (v001 DELL   MONTARA  0x06040000 PTL  0x00000050) @ 0x276eae9e
>ACPI: BOOT (v001 DELL   $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x276eafa4
>ACPI: ASF! (v001 DELL   MONTARA  0x06040000 PTL  0x00000001) @ 0x276eafcc
>ACPI: SSDT (v001 INTEL  CPU0CST  0x00000001 INTL 0x20020725) @ 0x276e52c4
>ACPI: SSDT (v001 DELL   MONTARA  0x06040000 INTL 0x20020725) @ 0x276e4e66
>ACPI: DSDT (v001 INTEL  MONTARAG 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 30000000 (gap: 28000000:d6c10000)
>Detected 1395.497 MHz processor.
>Built 1 zonelists.  Total pages: 161406
>Kernel command line: root=/dev/hda2 ro vga=extended lapic video=intelfb:1024x768 
>Local APIC disabled by BIOS -- reenabling.
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 631984k/645624k available (1544k kernel code, 12948k reserved, 577k data, 196k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2792.85 BogoMIPS (lpj=5585709)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0c20)
>CPU0: Intel(R) Pentium(R) M processor 1.40GHz stepping 06
>SMP motherboard not detected.
>Brought up 1 CPUs
>migration_cost=0
>checking if image is initramfs... it is
>Freeing initrd memory: 4407k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Embedded Controller [H_EC] (gpe 28) interrupt mode.
>ACPI: Power Resource [PFAN] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 3, cardbus bridge: 0000:02:03.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 36000000-37ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:03.1
>  IO window: 00003800-000038ff
>  IO window: 00003c00-00003cff
>  PREFETCH window: 32000000-33ffffff
>  MEM window: 38000000-39ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: e0200000-e02fffff
>  PREFETCH window: 30000000-33ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:03.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:03.0 to 64
>PCI: Enabling device 0000:02:03.1 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:03.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:03.1 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x38 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1175548502.892:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Time: tsc clocksource has been installed.
>ACPI: Fan [FAN0] (on)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (46 C)
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ICH4: chipset revision 1
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: HTS548040M9AT00, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ACPI: PCI Interrupt 0000:02:03.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[e0212000-e02127ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>tg3.c:v3.65 (August 07, 2006)
>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0f:1f:44:f3:d8
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
>hda: max request size: 512KiB
>hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hda4
>Attempting manual resume
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00065b4004fe33d2]
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: hda2: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 915747
>EXT3-fs: hda2: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Real Time Clock Driver v1.12ac
>input: PC Speaker as /class/input/input1
>intel_rng: FWH not detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>irda_init()
>NET: Registered protocol family 23
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>agpgart: Detected an Intel 855 Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xe8000000
>eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>pnp: Device 00:06 disabled.
>ts: Compaq touchscreen protocol output
>intel8x0_measure_ac97_clock: measured 55374 usecs
>intel8x0: clocking to 48000
>Yenta: CardBus bridge found at 0000:02:03.0 [1028:014f]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>Yenta: CardBus bridge found at 0000:02:03.1 [1028:014f]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Adding 1373516k swap on /dev/hda7.  Priority:-1 extents:1 across:1373516k
>EXT3 FS on hda2, internal journal
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (5043 buckets, 40344 max) - 224 bytes per conntrack
>fuse init (API version 7.7)
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>NTFS driver 2.1.27 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
>NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ttyS0: LSR safety check engaged!
>ttyS0: LSR safety check engaged!
>ttyS1: LSR safety check engaged!
>ttyS1: LSR safety check engaged!
>ttyS1: LSR safety check engaged!
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>apm: BIOS not found.
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>[drm] Initialized i915 1.5.0 20060119 on minor 0
>[drm] Initialized i915 1.5.0 20060119 on minor 1
>PM: Writing back config space on device 0000:02:05.0 at offset b (was 165d14e4, writing 20031028)
>PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 4008)
>PM: Writing back config space on device 0000:02:05.0 at offset 2 (was 2000000, writing 2000001)
>PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2b00000, writing 2b00106)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8

Actions: View

Attachments on bug 10467: 9371 | 9372 | 9439 | 9440 | 9727 | 9728 | 9729 | 9730 | 10373

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.