Attachment 95770 Details for Bug 76153 – dmesg

dmesg

display_f.dmesg (text/plain), 122.20 KB, created by Guo Jinxian on 2014-03-14 04:21:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-03-14 04:21:56 UTC

Size: 122.20 KB

patch

obsolete

>[    0.391705] pci 0000:00:02.0: Boot video device
>[    0.392023] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
>[    0.392128] PCI: CLS 64 bytes, default 64
>[    0.392131] initcall pci_apply_final_quirks+0x0/0xf1 returned 0 after 420 usecs
>[    0.392133] calling  populate_rootfs+0x0/0xd5 @ 1
>[    0.670507] initcall populate_rootfs+0x0/0xd5 returned 0 after 271624 usecs
>[    0.670511] calling  pci_iommu_init+0x0/0x37 @ 1
>[    0.670513] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.670613] software IO TLB [mem 0xa747c000-0xab47c000] (64MB) mapped at [ffff8800a747c000-ffff8800ab47bfff]
>[    0.670772] initcall pci_iommu_init+0x0/0x37 returned 0 after 251 usecs
>[    0.670775] calling  calgary_fixup_tce_spaces+0x0/0xee @ 1
>[    0.670778] initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs
>[    0.670862] calling  register_kernel_offset_dumper+0x0/0x18 @ 1
>[    0.670865] initcall register_kernel_offset_dumper+0x0/0x18 returned 0 after 0 usecs
>[    0.670867] calling  i8259A_init_ops+0x0/0x21 @ 1
>[    0.670873] initcall i8259A_init_ops+0x0/0x21 returned 0 after 2 usecs
>[    0.670874] calling  vsyscall_init+0x0/0x24 @ 1
>[    0.670888] initcall vsyscall_init+0x0/0x24 returned 0 after 10 usecs
>[    0.670889] calling  sbf_init+0x0/0xed @ 1
>[    0.670893] initcall sbf_init+0x0/0xed returned 0 after 0 usecs
>[    0.670894] calling  init_tsc_clocksource+0x0/0xb6 @ 1
>[    0.670898] initcall init_tsc_clocksource+0x0/0xb6 returned 0 after 1 usecs
>[    0.670899] calling  add_rtc_cmos+0x0/0xb0 @ 1
>[    0.670905] initcall add_rtc_cmos+0x0/0xb0 returned 0 after 2 usecs
>[    0.670907] calling  i8237A_init_ops+0x0/0x11 @ 1
>[    0.670912] initcall i8237A_init_ops+0x0/0x11 returned 0 after 3 usecs
>[    0.670914] calling  cache_sysfs_init+0x0/0x55 @ 1
>[    0.671068] initcall cache_sysfs_init+0x0/0x55 returned 0 after 148 usecs
>[    0.671070] calling  amd_uncore_init+0x0/0x137 @ 1
>[    0.671073] initcall amd_uncore_init+0x0/0x137 returned -19 after 0 usecs
>[    0.671075] calling  intel_uncore_init+0x0/0x36a @ 1
>[    0.671078] initcall intel_uncore_init+0x0/0x36a returned 0 after 0 usecs
>[    0.671080] calling  rapl_pmu_init+0x0/0x1c0 @ 1
>[    0.671090] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
>[    0.671243] initcall rapl_pmu_init+0x0/0x1c0 returned 0 after 157 usecs
>[    0.671245] calling  thermal_throttle_init_device+0x0/0x88 @ 1
>[    0.671249] initcall thermal_throttle_init_device+0x0/0x88 returned 0 after 0 usecs
>[    0.671250] calling  amd_ibs_init+0x0/0x1ca @ 1
>[    0.671254] initcall amd_ibs_init+0x0/0x1ca returned -19 after 0 usecs
>[    0.671255] calling  msr_init+0x0/0x11e @ 1
>[    0.671611] initcall msr_init+0x0/0x11e returned 0 after 345 usecs
>[    0.671613] calling  cpuid_init+0x0/0x11e @ 1
>[    0.671918] initcall cpuid_init+0x0/0x11e returned 0 after 295 usecs
>[    0.671920] calling  ioapic_init_ops+0x0/0x13 @ 1
>[    0.671923] initcall ioapic_init_ops+0x0/0x13 returned 0 after 0 usecs
>[    0.671925] calling  add_pcspkr+0x0/0x3f @ 1
>[    0.671958] initcall add_pcspkr+0x0/0x3f returned 0 after 29 usecs
>[    0.671959] calling  sysfb_init+0x0/0x6f @ 1
>[    0.671996] initcall sysfb_init+0x0/0x6f returned 0 after 33 usecs
>[    0.671998] calling  audit_classes_init+0x0/0xac @ 1
>[    0.672002] initcall audit_classes_init+0x0/0xac returned 0 after 1 usecs
>[    0.672004] calling  ia32_binfmt_init+0x0/0x11 @ 1
>[    0.672011] initcall ia32_binfmt_init+0x0/0x11 returned 0 after 3 usecs
>[    0.672013] calling  proc_execdomains_init+0x0/0x1f @ 1
>[    0.672020] initcall proc_execdomains_init+0x0/0x1f returned 0 after 3 usecs
>[    0.672022] calling  ioresources_init+0x0/0x39 @ 1
>[    0.672027] initcall ioresources_init+0x0/0x39 returned 0 after 2 usecs
>[    0.672028] calling  uid_cache_init+0x0/0x85 @ 1
>[    0.672034] initcall uid_cache_init+0x0/0x85 returned 0 after 3 usecs
>[    0.672036] calling  init_posix_timers+0x0/0x236 @ 1
>[    0.672046] initcall init_posix_timers+0x0/0x236 returned 0 after 7 usecs
>[    0.672047] calling  init_posix_cpu_timers+0x0/0xc1 @ 1
>[    0.672050] initcall init_posix_cpu_timers+0x0/0xc1 returned 0 after 0 usecs
>[    0.672051] calling  snapshot_device_init+0x0/0xc @ 1
>[    0.672091] initcall snapshot_device_init+0x0/0xc returned 0 after 36 usecs
>[    0.672092] calling  irq_pm_init_ops+0x0/0x11 @ 1
>[    0.672096] initcall irq_pm_init_ops+0x0/0x11 returned 0 after 0 usecs
>[    0.672098] calling  create_proc_profile+0x0/0x275 @ 1
>[    0.672102] initcall create_proc_profile+0x0/0x275 returned 0 after 0 usecs
>[    0.672103] calling  timekeeping_init_ops+0x0/0x11 @ 1
>[    0.672106] initcall timekeeping_init_ops+0x0/0x11 returned 0 after 0 usecs
>[    0.672108] calling  init_clocksource_sysfs+0x0/0x67 @ 1
>[    0.672170] initcall init_clocksource_sysfs+0x0/0x67 returned 0 after 58 usecs
>[    0.672172] calling  init_timer_list_procfs+0x0/0x2b @ 1
>[    0.672176] initcall init_timer_list_procfs+0x0/0x2b returned 0 after 1 usecs
>[    0.672178] calling  alarmtimer_init+0x0/0x193 @ 1
>[    0.672236] initcall alarmtimer_init+0x0/0x193 returned 0 after 54 usecs
>[    0.672237] calling  clockevents_init_sysfs+0x0/0xc5 @ 1
>[    0.672515] initcall clockevents_init_sysfs+0x0/0xc5 returned 0 after 268 usecs
>[    0.672516] calling  futex_init+0x0/0xd3 @ 1
>[    0.672527] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.672645] initcall futex_init+0x0/0xd3 returned 0 after 123 usecs
>[    0.672646] calling  proc_dma_init+0x0/0x1f @ 1
>[    0.672651] initcall proc_dma_init+0x0/0x1f returned 0 after 2 usecs
>[    0.672652] calling  proc_modules_init+0x0/0x20 @ 1
>[    0.672657] initcall proc_modules_init+0x0/0x20 returned 0 after 1 usecs
>[    0.672658] calling  kallsyms_init+0x0/0x22 @ 1
>[    0.672662] initcall kallsyms_init+0x0/0x22 returned 0 after 1 usecs
>[    0.672664] calling  crash_save_vmcoreinfo_init+0x0/0x505 @ 1
>[    0.672682] initcall crash_save_vmcoreinfo_init+0x0/0x505 returned 0 after 15 usecs
>[    0.672683] calling  crash_notes_memory_init+0x0/0x33 @ 1
>[    0.672688] initcall crash_notes_memory_init+0x0/0x33 returned 0 after 2 usecs
>[    0.672690] calling  pid_namespaces_init+0x0/0x2a @ 1
>[    0.672696] initcall pid_namespaces_init+0x0/0x2a returned 0 after 3 usecs
>[    0.672697] calling  ikconfig_init+0x0/0x3b @ 1
>[    0.672702] initcall ikconfig_init+0x0/0x3b returned 0 after 1 usecs
>[    0.672703] calling  audit_init+0x0/0xfd @ 1
>[    0.672705] audit: initializing netlink subsys (disabled)
>[    0.672840] audit: type=2000 audit(1394770171.658:1): initialized
>[    0.672944] initcall audit_init+0x0/0xfd returned 0 after 231 usecs
>[    0.672946] calling  audit_watch_init+0x0/0x37 @ 1
>[    0.672949] initcall audit_watch_init+0x0/0x37 returned 0 after 0 usecs
>[    0.672951] calling  audit_tree_init+0x0/0x54 @ 1
>[    0.672955] initcall audit_tree_init+0x0/0x54 returned 0 after 1 usecs
>[    0.672956] calling  init_kprobes+0x0/0x148 @ 1
>[    0.689571] initcall init_kprobes+0x0/0x148 returned 0 after 16209 usecs
>[    0.689573] calling  utsname_sysctl_init+0x0/0x11 @ 1
>[    0.689581] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 5 usecs
>[    0.689583] calling  irq_work_init_cpu_notifier+0x0/0x26 @ 1
>[    0.689586] initcall irq_work_init_cpu_notifier+0x0/0x26 returned 0 after 0 usecs
>[    0.689588] calling  perf_event_sysfs_init+0x0/0x8c @ 1
>[    0.689736] initcall perf_event_sysfs_init+0x0/0x8c returned 0 after 142 usecs
>[    0.689738] calling  init_per_zone_wmark_min+0x0/0x9b @ 1
>[    0.689778] initcall init_per_zone_wmark_min+0x0/0x9b returned 0 after 35 usecs
>[    0.689780] calling  kswapd_init+0x0/0x69 @ 1
>[    0.689808] initcall kswapd_init+0x0/0x69 returned 0 after 25 usecs
>[    0.689810] calling  setup_vmstat+0x0/0xdf @ 1
>[    0.689824] initcall setup_vmstat+0x0/0xdf returned 0 after 11 usecs
>[    0.689826] calling  mm_compute_batch_init+0x0/0x4d @ 1
>[    0.689829] initcall mm_compute_batch_init+0x0/0x4d returned 0 after 0 usecs
>[    0.689831] calling  slab_proc_init+0x0/0x22 @ 1
>[    0.689835] initcall slab_proc_init+0x0/0x22 returned 0 after 1 usecs
>[    0.689836] calling  proc_vmalloc_init+0x0/0x22 @ 1
>[    0.689841] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 1 usecs
>[    0.689842] calling  procswaps_init+0x0/0x21 @ 1
>[    0.689847] initcall procswaps_init+0x0/0x21 returned 0 after 1 usecs
>[    0.689849] calling  hugetlb_init+0x0/0x424 @ 1
>[    0.689851] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.689958] initcall hugetlb_init+0x0/0x424 returned 0 after 103 usecs
>[    0.689959] calling  slab_sysfs_init+0x0/0xef @ 1
>[    0.692283] initcall slab_sysfs_init+0x0/0xef returned 0 after 2262 usecs
>[    0.692286] calling  fcntl_init+0x0/0x27 @ 1
>[    0.692292] initcall fcntl_init+0x0/0x27 returned 0 after 2 usecs
>[    0.692295] calling  proc_filesystems_init+0x0/0x1f @ 1
>[    0.692301] initcall proc_filesystems_init+0x0/0x1f returned 0 after 2 usecs
>[    0.692303] calling  dio_init+0x0/0x2a @ 1
>[    0.692309] initcall dio_init+0x0/0x2a returned 0 after 2 usecs
>[    0.692311] calling  fsnotify_mark_init+0x0/0x3d @ 1
>[    0.692334] initcall fsnotify_mark_init+0x0/0x3d returned 0 after 19 usecs
>[    0.692336] calling  dnotify_init+0x0/0x78 @ 1
>[    0.692343] initcall dnotify_init+0x0/0x78 returned 0 after 3 usecs
>[    0.692344] calling  inotify_user_setup+0x0/0x48 @ 1
>[    0.692349] initcall inotify_user_setup+0x0/0x48 returned 0 after 2 usecs
>[    0.692350] calling  aio_setup+0x0/0x7a @ 1
>[    0.692365] initcall aio_setup+0x0/0x7a returned 0 after 11 usecs
>[    0.692366] calling  proc_locks_init+0x0/0x1f @ 1
>[    0.692371] initcall proc_locks_init+0x0/0x1f returned 0 after 1 usecs
>[    0.692372] calling  init_sys32_ioctl+0x0/0x25 @ 1
>[    0.692435] initcall init_sys32_ioctl+0x0/0x25 returned 0 after 58 usecs
>[    0.692436] calling  init_mbcache+0x0/0x11 @ 1
>[    0.692439] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
>[    0.692441] calling  dquot_init+0x0/0x10f @ 1
>[    0.692443] VFS: Disk quotas dquot_6.5.2
>[    0.692596] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.692700] initcall dquot_init+0x0/0x10f returned 0 after 250 usecs
>[    0.692702] calling  init_v2_quota_format+0x0/0x23 @ 1
>[    0.692705] initcall init_v2_quota_format+0x0/0x23 returned 0 after 0 usecs
>[    0.692707] calling  quota_init+0x0/0x2e @ 1
>[    0.692715] initcall quota_init+0x0/0x2e returned 0 after 5 usecs
>[    0.692717] calling  init_devpts_fs+0x0/0x5e @ 1
>[    0.692732] initcall init_devpts_fs+0x0/0x5e returned 0 after 12 usecs
>[    0.692734] calling  init_reiserfs_fs+0x0/0x68 @ 1
>[    0.692791] initcall init_reiserfs_fs+0x0/0x68 returned 0 after 52 usecs
>[    0.692792] calling  init_ext3_fs+0x0/0x7e @ 1
>[    0.692882] initcall init_ext3_fs+0x0/0x7e returned 0 after 84 usecs
>[    0.692883] calling  init_ext2_fs+0x0/0x7e @ 1
>[    0.692932] initcall init_ext2_fs+0x0/0x7e returned 0 after 44 usecs
>[    0.692933] calling  ext4_init_fs+0x0/0x20a @ 1
>[    0.693159] initcall ext4_init_fs+0x0/0x20a returned 0 after 217 usecs
>[    0.693161] calling  journal_init+0x0/0xa3 @ 1
>[    0.693332] initcall journal_init+0x0/0xa3 returned 0 after 164 usecs
>[    0.693334] calling  journal_init+0x0/0x109 @ 1
>[    0.693386] initcall journal_init+0x0/0x109 returned 0 after 47 usecs
>[    0.693387] calling  init_hugetlbfs_fs+0x0/0x156 @ 1
>[    0.693451] initcall init_hugetlbfs_fs+0x0/0x156 returned 0 after 58 usecs
>[    0.693453] calling  init_fat_fs+0x0/0x45 @ 1
>[    0.693539] initcall init_fat_fs+0x0/0x45 returned 0 after 81 usecs
>[    0.693541] calling  init_vfat_fs+0x0/0xc @ 1
>[    0.693546] initcall init_vfat_fs+0x0/0xc returned 0 after 2 usecs
>[    0.693548] calling  init_iso9660_fs+0x0/0x80 @ 1
>[    0.693597] initcall init_iso9660_fs+0x0/0x80 returned 0 after 44 usecs
>[    0.693598] calling  init_nfs_fs+0x0/0x136 @ 1
>[    0.693871] initcall init_nfs_fs+0x0/0x136 returned 0 after 263 usecs
>[    0.693873] calling  init_nfs_v2+0x0/0x11 @ 1
>[    0.693877] initcall init_nfs_v2+0x0/0x11 returned 0 after 0 usecs
>[    0.693878] calling  init_nfs_v3+0x0/0x11 @ 1
>[    0.693881] initcall init_nfs_v3+0x0/0x11 returned 0 after 0 usecs
>[    0.693883] calling  init_nfs_v4+0x0/0x3a @ 1
>[    0.693885] NFS: Registering the id_resolver key type
>[    0.693992] Key type id_resolver registered
>[    0.694090] Key type id_legacy registered
>[    0.694192] initcall init_nfs_v4+0x0/0x3a returned 0 after 299 usecs
>[    0.694194] calling  init_nfsd+0x0/0x106 @ 1
>[    0.694196] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.694449] initcall init_nfsd+0x0/0x106 returned 0 after 245 usecs
>[    0.694450] calling  init_nlm+0x0/0x40 @ 1
>[    0.694458] initcall init_nlm+0x0/0x40 returned 0 after 4 usecs
>[    0.694459] calling  init_nls_cp437+0x0/0xe @ 1
>[    0.694463] initcall init_nls_cp437+0x0/0xe returned 0 after 0 usecs
>[    0.694464] calling  init_nls_ascii+0x0/0xe @ 1
>[    0.694468] initcall init_nls_ascii+0x0/0xe returned 0 after 0 usecs
>[    0.694470] calling  init_autofs4_fs+0x0/0x2b @ 1
>[    0.694526] initcall init_autofs4_fs+0x0/0x2b returned 0 after 51 usecs
>[    0.694527] calling  fuse_init+0x0/0x140 @ 1
>[    0.694530] fuse init (API version 7.22)
>[    0.694765] initcall fuse_init+0x0/0x140 returned 0 after 229 usecs
>[    0.694767] calling  ipc_init+0x0/0x20 @ 1
>[    0.694776] msgmni has been set to 15767
>[    0.694879] initcall ipc_init+0x0/0x20 returned 0 after 106 usecs
>[    0.694881] calling  ipc_sysctl_init+0x0/0x11 @ 1
>[    0.694890] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 5 usecs
>[    0.694891] calling  init_mqueue_fs+0x0/0x99 @ 1
>[    0.694956] initcall init_mqueue_fs+0x0/0x99 returned 0 after 59 usecs
>[    0.694958] calling  key_proc_init+0x0/0x56 @ 1
>[    0.694964] initcall key_proc_init+0x0/0x56 returned 0 after 2 usecs
>[    0.694965] calling  crypto_wq_init+0x0/0x30 @ 1
>[    0.695000] initcall crypto_wq_init+0x0/0x30 returned 0 after 30 usecs
>[    0.695002] calling  crypto_algapi_init+0x0/0xa @ 1
>[    0.695006] initcall crypto_algapi_init+0x0/0xa returned 0 after 1 usecs
>[    0.695008] calling  chainiv_module_init+0x0/0xc @ 1
>[    0.695011] initcall chainiv_module_init+0x0/0xc returned 0 after 0 usecs
>[    0.695013] calling  eseqiv_module_init+0x0/0xc @ 1
>[    0.695016] initcall eseqiv_module_init+0x0/0xc returned 0 after 0 usecs
>[    0.695018] calling  hmac_module_init+0x0/0xc @ 1
>[    0.695022] initcall hmac_module_init+0x0/0xc returned 0 after 0 usecs
>[    0.695023] calling  md5_mod_init+0x0/0xc @ 1
>[    0.695055] initcall md5_mod_init+0x0/0xc returned 0 after 27 usecs
>[    0.695057] calling  sha1_generic_mod_init+0x0/0xc @ 1
>[    0.695084] initcall sha1_generic_mod_init+0x0/0xc returned 0 after 23 usecs
>[    0.695086] calling  aes_init+0x0/0xc @ 1
>[    0.695123] initcall aes_init+0x0/0xc returned 0 after 33 usecs
>[    0.695125] calling  crc32c_mod_init+0x0/0xc @ 1
>[    0.695151] initcall crc32c_mod_init+0x0/0xc returned 0 after 23 usecs
>[    0.695153] calling  krng_mod_init+0x0/0xc @ 1
>[    0.695180] initcall krng_mod_init+0x0/0xc returned 0 after 23 usecs
>[    0.695182] calling  proc_genhd_init+0x0/0x39 @ 1
>[    0.695187] initcall proc_genhd_init+0x0/0x39 returned 0 after 2 usecs
>[    0.695189] calling  bsg_init+0x0/0x16c @ 1
>[    0.695261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.695418] initcall bsg_init+0x0/0x16c returned 0 after 220 usecs
>[    0.695420] calling  noop_init+0x0/0xc @ 1
>[    0.695422] io scheduler noop registered
>[    0.695520] initcall noop_init+0x0/0xc returned 0 after 94 usecs
>[    0.695521] calling  deadline_init+0x0/0xc @ 1
>[    0.695524] io scheduler deadline registered
>[    0.695622] initcall deadline_init+0x0/0xc returned 0 after 95 usecs
>[    0.695624] calling  cfq_init+0x0/0x7f @ 1
>[    0.695669] io scheduler cfq registered (default)
>[    0.695768] initcall cfq_init+0x0/0x7f returned 0 after 138 usecs
>[    0.695770] calling  libcrc32c_mod_init+0x0/0x27 @ 1
>[    0.695781] initcall libcrc32c_mod_init+0x0/0x27 returned 0 after 0 usecs
>[    0.695783] calling  percpu_counter_startup+0x0/0x16 @ 1
>[    0.695787] initcall percpu_counter_startup+0x0/0x16 returned 0 after 1 usecs
>[    0.695789] calling  phy_core_init+0x0/0x4a @ 1
>[    0.695819] initcall phy_core_init+0x0/0x4a returned 0 after 26 usecs
>[    0.695821] calling  pci_proc_init+0x0/0x60 @ 1
>[    0.695844] initcall pci_proc_init+0x0/0x60 returned 0 after 19 usecs
>[    0.695846] calling  pcie_portdrv_init+0x0/0x6c @ 1
>[    0.695970] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.696351] initcall pcie_portdrv_init+0x0/0x6c returned 0 after 488 usecs
>[    0.696353] calling  aer_service_init+0x0/0x1e @ 1
>[    0.696383] initcall aer_service_init+0x0/0x1e returned 0 after 25 usecs
>[    0.696384] calling  pcie_pme_service_init+0x0/0xc @ 1
>[    0.696415] initcall pcie_pme_service_init+0x0/0xc returned 0 after 26 usecs
>[    0.696417] calling  pci_hotplug_init+0x0/0x1a @ 1
>[    0.696419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.696519] initcall pci_hotplug_init+0x0/0x1a returned 0 after 96 usecs
>[    0.696520] calling  fb_console_init+0x0/0x10b @ 1
>[    0.696556] initcall fb_console_init+0x0/0x10b returned 0 after 31 usecs
>[    0.696558] calling  genericbl_driver_init+0x0/0xe @ 1
>[    0.696588] initcall genericbl_driver_init+0x0/0xe returned 0 after 25 usecs
>[    0.696589] calling  vesafb_driver_init+0x0/0xe @ 1
>[    0.696619] initcall vesafb_driver_init+0x0/0xe returned 0 after 26 usecs
>[    0.696621] calling  efifb_driver_init+0x0/0xe @ 1
>[    0.696652] initcall efifb_driver_init+0x0/0xe returned 0 after 26 usecs
>[    0.696654] calling  acpi_reserve_resources+0x0/0xe9 @ 1
>[    0.696659] initcall acpi_reserve_resources+0x0/0xe9 returned 0 after 2 usecs
>[    0.696661] calling  acpi_fan_driver_init+0x0/0xc @ 1
>[    0.696727] ACPI: Fan [FAN0] (off)
>[    0.696877] ACPI: Fan [FAN1] (off)
>[    0.697009] ACPI: Fan [FAN2] (on)
>[    0.697150] ACPI: Fan [FAN3] (on)
>[    0.697281] ACPI: Fan [FAN4] (on)
>[    0.697401] initcall acpi_fan_driver_init+0x0/0xc returned 0 after 719 usecs
>[    0.697403] calling  acpi_processor_driver_init+0x0/0x42 @ 1
>[    0.697603] Monitor-Mwait will be used to enter C-1 state
>[    0.697614] Monitor-Mwait will be used to enter C-2 state
>[    0.697623] ACPI: acpi_idle registered with cpuidle
>[    0.698664] initcall acpi_processor_driver_init+0x0/0x42 returned 0 after 1226 usecs
>[    0.698666] calling  acpi_thermal_init+0x0/0x40 @ 1
>[    0.698935] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.699033] ACPI: Thermal Zone [TZ00] (28 C)
>[    0.699285] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.699381] ACPI: Thermal Zone [TZ01] (30 C)
>[    0.709656] thermal LNXTHERM:02: registered as thermal_zone2
>[    0.709751] ACPI: Thermal Zone [THRM] (67 C)
>[    0.709961] initcall acpi_thermal_init+0x0/0x40 returned 0 after 11017 usecs
>[    0.709962] calling  pty_init+0x0/0x20a @ 1
>[    0.710077] initcall pty_init+0x0/0x20a returned 0 after 109 usecs
>[    0.710079] calling  serial8250_init+0x0/0x13c @ 1
>[    0.710081] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.710784] initcall serial8250_init+0x0/0x13c returned 0 after 684 usecs
>[    0.710794] calling  serial_pci_driver_init+0x0/0x15 @ 1
>[    0.710848] initcall serial_pci_driver_init+0x0/0x15 returned 0 after 50 usecs
>[    0.710850] calling  hpet_init+0x0/0x62 @ 1
>[    0.711015] initcall hpet_init+0x0/0x62 returned 0 after 158 usecs
>[    0.711017] calling  nvram_init+0x0/0x78 @ 1
>[    0.711063] Non-volatile memory driver v1.3
>[    0.711157] initcall nvram_init+0x0/0x78 returned 0 after 134 usecs
>[    0.711159] calling  mod_init+0x0/0x49 @ 1
>[    0.711162] initcall mod_init+0x0/0x49 returned -19 after 0 usecs
>[    0.711163] calling  agp_init+0x0/0x26 @ 1
>[    0.711165] Linux agpgart interface v0.103
>[    0.711259] initcall agp_init+0x0/0x26 returned 0 after 91 usecs
>[    0.711260] calling  agp_amd64_mod_init+0x0/0x1b @ 1
>[    0.711322] initcall agp_amd64_mod_init+0x0/0x1b returned -19 after 57 usecs
>[    0.711323] calling  agp_intel_init+0x0/0x24 @ 1
>[    0.711354] initcall agp_intel_init+0x0/0x24 returned 0 after 27 usecs
>[    0.711355] calling  agp_sis_init+0x0/0x24 @ 1
>[    0.711385] initcall agp_sis_init+0x0/0x24 returned 0 after 26 usecs
>[    0.711386] calling  agp_via_init+0x0/0x24 @ 1
>[    0.711416] initcall agp_via_init+0x0/0x24 returned 0 after 27 usecs
>[    0.711417] calling  cn_proc_init+0x0/0x33 @ 1
>[    0.711420] initcall cn_proc_init+0x0/0x33 returned 0 after 0 usecs
>[    0.711422] calling  topology_sysfs_init+0x0/0x52 @ 1
>[    0.711448] initcall topology_sysfs_init+0x0/0x52 returned 0 after 22 usecs
>[    0.711449] calling  brd_init+0x0/0x1bf @ 1
>[    0.713123] brd: module loaded
>[    0.713221] initcall brd_init+0x0/0x1bf returned 0 after 1725 usecs
>[    0.713223] calling  mac_hid_init+0x0/0x1f @ 1
>[    0.713230] initcall mac_hid_init+0x0/0x1f returned 0 after 3 usecs
>[    0.713231] calling  scsi_tgt_init+0x0/0x83 @ 1
>[    0.713315] initcall scsi_tgt_init+0x0/0x83 returned 0 after 78 usecs
>[    0.713317] calling  raid_init+0x0/0xc @ 1
>[    0.713349] initcall raid_init+0x0/0xc returned 0 after 28 usecs
>[    0.713350] calling  spi_transport_init+0x0/0x74 @ 1
>[    0.713409] initcall spi_transport_init+0x0/0x74 returned 0 after 54 usecs
>[    0.713411] calling  fc_transport_init+0x0/0x8f @ 1
>[    0.713531] initcall fc_transport_init+0x0/0x8f returned 0 after 115 usecs
>[    0.713533] calling  iscsi_transport_init+0x0/0x1b4 @ 1
>[    0.713535] Loading iSCSI transport class v2.0-870.
>[    0.713890] initcall iscsi_transport_init+0x0/0x1b4 returned 0 after 345 usecs
>[    0.713892] calling  sas_transport_init+0x0/0xd5 @ 1
>[    0.714061] initcall sas_transport_init+0x0/0xd5 returned 0 after 162 usecs
>[    0.714063] calling  sas_class_init+0x0/0x31 @ 1
>[    0.714070] initcall sas_class_init+0x0/0x31 returned 0 after 3 usecs
>[    0.714071] calling  srp_transport_init+0x0/0x3d @ 1
>[    0.714132] initcall srp_transport_init+0x0/0x3d returned 0 after 55 usecs
>[    0.714133] calling  iscsi_sw_tcp_init+0x0/0x3f @ 1
>[    0.714171] iscsi: registered transport (tcp)
>[    0.714272] initcall iscsi_sw_tcp_init+0x0/0x3f returned 0 after 132 usecs
>[    0.714274] calling  blogic_init+0x0/0xfcb @ 1
>[    0.714302] initcall blogic_init+0x0/0xfcb returned 0 after 23 usecs
>[    0.714305] calling  arcmsr_module_init+0x0/0x15 @ 1
>[    0.714345] initcall arcmsr_module_init+0x0/0x15 returned 0 after 36 usecs
>[    0.714347] calling  ahc_linux_init+0x0/0x62 @ 1
>[    0.714388] initcall ahc_linux_init+0x0/0x62 returned 0 after 36 usecs
>[    0.714390] calling  ahd_linux_init+0x0/0x7c @ 1
>[    0.714431] initcall ahd_linux_init+0x0/0x7c returned 0 after 37 usecs
>[    0.714433] calling  aac_init+0x0/0x72 @ 1
>[    0.714435] Adaptec aacraid driver 1.2-0[30200]-ms
>[    0.714572] initcall aac_init+0x0/0x72 returned 0 after 132 usecs
>[    0.714574] calling  aic94xx_init+0x0/0x139 @ 1
>[    0.714575] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.714723] initcall aic94xx_init+0x0/0x139 returned 0 after 143 usecs
>[    0.714725] calling  ips_module_init+0x0/0x18b @ 1
>[    0.714796] initcall ips_module_init+0x0/0x18b returned -19 after 66 usecs
>[    0.714798] calling  qla1280_init+0x0/0x15 @ 1
>[    0.714834] initcall qla1280_init+0x0/0x15 returned 0 after 32 usecs
>[    0.714836] calling  qla2x00_module_init+0x0/0x202 @ 1
>[    0.714845] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
>[    0.715040] initcall qla2x00_module_init+0x0/0x202 returned 0 after 195 usecs
>[    0.715042] calling  qla4xxx_module_init+0x0/0xda @ 1
>[    0.715081] iscsi: registered transport (qla4xxx)
>[    0.715213] QLogic iSCSI HBA Driver
>[    0.715312] initcall qla4xxx_module_init+0x0/0xda returned 0 after 261 usecs
>[    0.715314] calling  sym2_init+0x0/0xfe @ 1
>[    0.715352] initcall sym2_init+0x0/0xfe returned 0 after 34 usecs
>[    0.715354] calling  dc395x_module_init+0x0/0x15 @ 1
>[    0.715418] initcall dc395x_module_init+0x0/0x15 returned 0 after 58 usecs
>[    0.715419] calling  dc390_module_init+0x0/0x95 @ 1
>[    0.715422] DC390: clustering now enabled by default. If you get problems load
>[    0.715579]        with "disable_clustering=1" and report to maintainers
>[    0.715720] initcall dc390_module_init+0x0/0x95 returned 0 after 290 usecs
>[    0.715722] calling  atp870u_init+0x0/0x15 @ 1
>[    0.715780] initcall atp870u_init+0x0/0x15 returned 0 after 54 usecs
>[    0.715782] calling  gdth_init+0x0/0xe6 @ 1
>[    0.715785] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.715928] initcall gdth_init+0x0/0xe6 returned 0 after 139 usecs
>[    0.715930] calling  initio_init_driver+0x0/0x15 @ 1
>[    0.715967] initcall initio_init_driver+0x0/0x15 returned 0 after 33 usecs
>[    0.715969] calling  inia100_init+0x0/0x15 @ 1
>[    0.716005] initcall inia100_init+0x0/0x15 returned 0 after 32 usecs
>[    0.716006] calling  hptiop_module_init+0x0/0x33 @ 1
>[    0.716009] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.716144] initcall hptiop_module_init+0x0/0x33 returned 0 after 131 usecs
>[    0.716146] calling  stex_init+0x0/0x2c @ 1
>[    0.716148] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.716286] initcall stex_init+0x0/0x2c returned 0 after 133 usecs
>[    0.716288] calling  mvs_init+0x0/0xa2 @ 1
>[    0.716329] initcall mvs_init+0x0/0xa2 returned 0 after 37 usecs
>[    0.716331] calling  init_st+0x0/0x169 @ 1
>[    0.716334] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.716507] initcall init_st+0x0/0x169 returned 0 after 167 usecs
>[    0.716508] calling  init_osst+0x0/0x140 @ 1
>[    0.716511] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.716739] initcall init_osst+0x0/0x140 returned 0 after 221 usecs
>[    0.716741] calling  init_sd+0x0/0x157 @ 1
>[    0.716812] initcall init_sd+0x0/0x157 returned 0 after 66 usecs
>[    0.716814] calling  init_sr+0x0/0x47 @ 1
>[    0.716846] initcall init_sr+0x0/0x47 returned 0 after 28 usecs
>[    0.716848] calling  init_sg+0x0/0x121 @ 1
>[    0.716885] initcall init_sg+0x0/0x121 returned 0 after 33 usecs
>[    0.716887] calling  init_ch_module+0x0/0xad @ 1
>[    0.716889] SCSI Media Changer driver v0.25 
>[    0.717050] initcall init_ch_module+0x0/0xad returned 0 after 155 usecs
>[    0.717052] calling  ahci_pci_driver_init+0x0/0x15 @ 1
>[    0.717065] ahci 0000:00:1f.2: version 3.0
>[    0.717155] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>[    0.717194] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
>[    0.717355] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[    0.719739] scsi0 : ahci
>[    0.720008] scsi1 : ahci
>[    0.720257] scsi2 : ahci
>[    0.720506] scsi3 : ahci
>[    0.720749] scsi4 : ahci
>[    0.721028] scsi5 : ahci
>[    0.721205] ata1: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a100 irq 41
>[    0.721363] ata2: DUMMY
>[    0.721457] ata3: DUMMY
>[    0.721552] ata4: DUMMY
>[    0.721648] ata5: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a300 irq 41
>[    0.721811] ata6: DUMMY
>[    0.721917] calling  1_async_port_probe+0x0/0x45 @ 6
>[    0.721966] calling  2_async_port_probe+0x0/0x45 @ 40
>[    0.721974] async_waiting @ 40
>[    0.722034] calling  3_async_port_probe+0x0/0x45 @ 1115
>[    0.722047] async_waiting @ 1115
>[    0.722099] calling  4_async_port_probe+0x0/0x45 @ 1116
>[    0.722109] async_waiting @ 1116
>[    0.722161] calling  5_async_port_probe+0x0/0x45 @ 1117
>[    0.722221] calling  6_async_port_probe+0x0/0x45 @ 1118
>[    0.722239] async_waiting @ 1118
>[    0.722281] initcall ahci_pci_driver_init+0x0/0x15 returned 0 after 5097 usecs
>[    0.722283] calling  inic_pci_driver_init+0x0/0x15 @ 1
>[    0.722323] initcall inic_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
>[    0.722325] calling  sil24_pci_driver_init+0x0/0x15 @ 1
>[    0.722366] initcall sil24_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
>[    0.722368] calling  qs_ata_pci_driver_init+0x0/0x15 @ 1
>[    0.722406] initcall qs_ata_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.722408] calling  pdc_sata_pci_driver_init+0x0/0x15 @ 1
>[    0.722446] initcall pdc_sata_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.722448] calling  piix_init+0x0/0x26 @ 1
>[    0.722488] initcall piix_init+0x0/0x26 returned 0 after 36 usecs
>[    0.722490] calling  mv_init+0x0/0x48 @ 1
>[    0.722559] initcall mv_init+0x0/0x48 returned 0 after 63 usecs
>[    0.722561] calling  nv_pci_driver_init+0x0/0x15 @ 1
>[    0.722599] initcall nv_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.722601] calling  pdc_ata_pci_driver_init+0x0/0x15 @ 1
>[    0.722639] initcall pdc_ata_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.722641] calling  sil_pci_driver_init+0x0/0x15 @ 1
>[    0.722680] initcall sil_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.722682] calling  sis_pci_driver_init+0x0/0x15 @ 1
>[    0.722719] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.722721] calling  k2_sata_pci_driver_init+0x0/0x15 @ 1
>[    0.722758] initcall k2_sata_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.722760] calling  uli_pci_driver_init+0x0/0x15 @ 1
>[    0.722806] initcall uli_pci_driver_init+0x0/0x15 returned 0 after 41 usecs
>[    0.722808] calling  svia_pci_driver_init+0x0/0x15 @ 1
>[    0.722848] initcall svia_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.722850] calling  vsc_sata_pci_driver_init+0x0/0x15 @ 1
>[    0.722886] initcall vsc_sata_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.722888] calling  ali_init+0x0/0x4e @ 1
>[    0.722926] initcall ali_init+0x0/0x4e returned 0 after 33 usecs
>[    0.722927] calling  amd_pci_driver_init+0x0/0x15 @ 1
>[    0.722966] initcall amd_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.722968] calling  artop_pci_driver_init+0x0/0x15 @ 1
>[    0.723004] initcall artop_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723006] calling  atiixp_pci_driver_init+0x0/0x15 @ 1
>[    0.723042] initcall atiixp_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723044] calling  atp867x_driver_init+0x0/0x15 @ 1
>[    0.723081] initcall atp867x_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723083] calling  cmd64x_pci_driver_init+0x0/0x15 @ 1
>[    0.723123] initcall cmd64x_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
>[    0.723125] calling  cs5520_pci_driver_init+0x0/0x15 @ 1
>[    0.723161] initcall cs5520_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723163] calling  cs5530_pci_driver_init+0x0/0x15 @ 1
>[    0.723200] initcall cs5530_pci_driver_init+0x0/0x15 returned 0 after 31 usecs
>[    0.723202] calling  cy82c693_pci_driver_init+0x0/0x15 @ 1
>[    0.723238] initcall cy82c693_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723240] calling  efar_pci_driver_init+0x0/0x15 @ 1
>[    0.723278] initcall efar_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.723280] calling  hpt36x_pci_driver_init+0x0/0x15 @ 1
>[    0.723317] initcall hpt36x_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.723319] calling  hpt37x_pci_driver_init+0x0/0x15 @ 1
>[    0.723356] initcall hpt37x_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723358] calling  hpt3x2n_pci_driver_init+0x0/0x15 @ 1
>[    0.723395] initcall hpt3x2n_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723397] calling  hpt3x3_pci_driver_init+0x0/0x15 @ 1
>[    0.723435] initcall hpt3x3_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.723437] calling  it8213_pci_driver_init+0x0/0x15 @ 1
>[    0.723473] initcall it8213_pci_driver_init+0x0/0x15 returned 0 after 31 usecs
>[    0.723475] calling  it821x_pci_driver_init+0x0/0x15 @ 1
>[    0.723512] initcall it821x_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723514] calling  jmicron_pci_driver_init+0x0/0x15 @ 1
>[    0.723552] initcall jmicron_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.723554] calling  marvell_pci_driver_init+0x0/0x15 @ 1
>[    0.723591] initcall marvell_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723593] calling  netcell_pci_driver_init+0x0/0x15 @ 1
>[    0.723629] initcall netcell_pci_driver_init+0x0/0x15 returned 0 after 31 usecs
>[    0.723631] calling  ninja32_pci_driver_init+0x0/0x15 @ 1
>[    0.723667] initcall ninja32_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723669] calling  ns87415_pci_driver_init+0x0/0x15 @ 1
>[    0.723709] initcall ns87415_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.723711] calling  oldpiix_pci_driver_init+0x0/0x15 @ 1
>[    0.723748] initcall oldpiix_pci_driver_init+0x0/0x15 returned 0 after 32 usecs
>[    0.723750] calling  optidma_pci_driver_init+0x0/0x15 @ 1
>[    0.723786] initcall optidma_pci_driver_init+0x0/0x15 returned 0 after 31 usecs
>[    0.723788] calling  pdc2027x_pci_driver_init+0x0/0x15 @ 1
>[    0.723847] initcall pdc2027x_pci_driver_init+0x0/0x15 returned 0 after 54 usecs
>[    0.723850] calling  pdc202xx_pci_driver_init+0x0/0x15 @ 1
>[    0.723891] initcall pdc202xx_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
>[    0.723894] calling  serverworks_pci_driver_init+0x0/0x15 @ 1
>[    0.723934] initcall serverworks_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.723936] calling  sil680_pci_driver_init+0x0/0x15 @ 1
>[    0.723975] initcall sil680_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.723977] calling  sis_pci_driver_init+0x0/0x15 @ 1
>[    0.724015] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 33 usecs
>[    0.724017] calling  triflex_pci_driver_init+0x0/0x15 @ 1
>[    0.724059] initcall triflex_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
>[    0.724061] calling  via_pci_driver_init+0x0/0x15 @ 1
>[    0.724099] initcall via_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.724101] calling  sl82c105_pci_driver_init+0x0/0x15 @ 1
>[    0.724140] initcall sl82c105_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.724142] calling  cmd640_pci_driver_init+0x0/0x15 @ 1
>[    0.724181] initcall cmd640_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.724183] calling  mpiix_pci_driver_init+0x0/0x15 @ 1
>[    0.724222] initcall mpiix_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.724224] calling  ns87410_pci_driver_init+0x0/0x15 @ 1
>[    0.724262] initcall ns87410_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.724264] calling  opti_pci_driver_init+0x0/0x15 @ 1
>[    0.724304] initcall opti_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.724306] calling  pcmcia_driver_init+0x0/0xc @ 1
>[    0.724355] initcall pcmcia_driver_init+0x0/0xc returned 0 after 43 usecs
>[    0.724357] calling  pacpi_pci_driver_init+0x0/0x15 @ 1
>[    0.724396] initcall pacpi_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.724398] calling  ata_generic_pci_driver_init+0x0/0x15 @ 1
>[    0.724437] initcall ata_generic_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
>[    0.724439] calling  net_olddevs_init+0x0/0x53 @ 1
>[    0.724445] initcall net_olddevs_init+0x0/0x53 returned 0 after 2 usecs
>[    0.724447] calling  b44_init+0x0/0x49 @ 1
>[    0.724513] initcall b44_init+0x0/0x49 returned 0 after 61 usecs
>[    0.724515] calling  bnx2_pci_driver_init+0x0/0x15 @ 1
>[    0.724555] initcall bnx2_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.724557] calling  cnic_init+0x0/0x79 @ 1
>[    0.724560] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.19 (December 19, 2013)
>[    0.724746] initcall cnic_init+0x0/0x79 returned 0 after 180 usecs
>[    0.724748] calling  bnx2x_init+0x0/0x92 @ 1
>[    0.724751] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    0.724988] initcall bnx2x_init+0x0/0x92 returned 0 after 230 usecs
>[    0.724990] calling  tg3_driver_init+0x0/0x15 @ 1
>[    0.725030] initcall tg3_driver_init+0x0/0x15 returned 0 after 35 usecs
>[    0.725032] calling  e100_init_module+0x0/0x5b @ 1
>[    0.725035] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.725136] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.725275] initcall e100_init_module+0x0/0x5b returned 0 after 233 usecs
>[    0.725277] calling  e1000_init_module+0x0/0x7d @ 1
>[    0.725280] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.725383] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.725547] initcall e1000_init_module+0x0/0x7d returned 0 after 259 usecs
>[    0.725549] calling  e1000_init_module+0x0/0x3a @ 1
>[    0.725551] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.725652] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    0.725814] initcall e1000_init_module+0x0/0x3a returned 0 after 255 usecs
>[    0.725816] calling  igb_init_module+0x0/0x48 @ 1
>[    0.725818] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.725919] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    0.726084] initcall igb_init_module+0x0/0x48 returned 0 after 258 usecs
>[    0.726086] calling  zd1201_usb_init+0x0/0x15 @ 1
>[    0.726144] usbcore: registered new interface driver zd1201
>[    0.726244] initcall zd1201_usb_init+0x0/0x15 returned 0 after 151 usecs
>[    0.726246] calling  catc_driver_init+0x0/0x15 @ 1
>[    0.726296] usbcore: registered new interface driver catc
>[    0.726396] initcall catc_driver_init+0x0/0x15 returned 0 after 143 usecs
>[    0.726398] calling  kaweth_driver_init+0x0/0x15 @ 1
>[    0.726451] usbcore: registered new interface driver kaweth
>[    0.726552] initcall kaweth_driver_init+0x0/0x15 returned 0 after 146 usecs
>[    0.726554] calling  pegasus_init+0x0/0x16a @ 1
>[    0.726556] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.726772] usbcore: registered new interface driver pegasus
>[    0.726885] initcall pegasus_init+0x0/0x16a returned 0 after 320 usecs
>[    0.726887] calling  rtl8150_driver_init+0x0/0x15 @ 1
>[    0.726976] usbcore: registered new interface driver rtl8150
>[    0.727078] initcall rtl8150_driver_init+0x0/0x15 returned 0 after 183 usecs
>[    0.727080] calling  asix_driver_init+0x0/0x15 @ 1
>[    0.727136] usbcore: registered new interface driver asix
>[    0.727237] initcall asix_driver_init+0x0/0x15 returned 0 after 149 usecs
>[    0.727239] calling  ax88179_178a_driver_init+0x0/0x15 @ 1
>[    0.727295] usbcore: registered new interface driver ax88179_178a
>[    0.727398] initcall ax88179_178a_driver_init+0x0/0x15 returned 0 after 151 usecs
>[    0.727400] calling  cdc_driver_init+0x0/0x15 @ 1
>[    0.727454] usbcore: registered new interface driver cdc_ether
>[    0.727556] initcall cdc_driver_init+0x0/0x15 returned 0 after 149 usecs
>[    0.727558] calling  r815x_driver_init+0x0/0x15 @ 1
>[    0.727617] usbcore: registered new interface driver r815x
>[    0.727719] initcall r815x_driver_init+0x0/0x15 returned 0 after 153 usecs
>[    0.727721] calling  dm9601_driver_init+0x0/0x15 @ 1
>[    0.727795] usbcore: registered new interface driver dm9601
>[    0.727907] initcall dm9601_driver_init+0x0/0x15 returned 0 after 178 usecs
>[    0.727910] calling  gl620a_driver_init+0x0/0x15 @ 1
>[    0.727994] usbcore: registered new interface driver gl620a
>[    0.728097] initcall gl620a_driver_init+0x0/0x15 returned 0 after 179 usecs
>[    0.728099] calling  net1080_driver_init+0x0/0x15 @ 1
>[    0.728149] usbcore: registered new interface driver net1080
>[    0.728252] initcall net1080_driver_init+0x0/0x15 returned 0 after 146 usecs
>[    0.728254] calling  plusb_driver_init+0x0/0x15 @ 1
>[    0.728304] usbcore: registered new interface driver plusb
>[    0.728407] initcall plusb_driver_init+0x0/0x15 returned 0 after 146 usecs
>[    0.728409] calling  rndis_driver_init+0x0/0x15 @ 1
>[    0.728459] usbcore: registered new interface driver rndis_host
>[    0.728563] initcall rndis_driver_init+0x0/0x15 returned 0 after 146 usecs
>[    0.728565] calling  cdc_subset_driver_init+0x0/0x15 @ 1
>[    0.728614] usbcore: registered new interface driver cdc_subset
>[    0.728717] initcall cdc_subset_driver_init+0x0/0x15 returned 0 after 145 usecs
>[    0.728719] calling  zaurus_driver_init+0x0/0x15 @ 1
>[    0.728761] usbcore: registered new interface driver zaurus
>[    0.728883] initcall zaurus_driver_init+0x0/0x15 returned 0 after 156 usecs
>[    0.728885] calling  mcs7830_driver_init+0x0/0x15 @ 1
>[    0.728940] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.729099] initcall mcs7830_driver_init+0x0/0x15 returned 0 after 205 usecs
>[    0.729102] calling  usbnet_init+0x0/0x28 @ 1
>[    0.729109] initcall usbnet_init+0x0/0x28 returned 0 after 3 usecs
>[    0.729111] calling  cdc_ncm_driver_init+0x0/0x15 @ 1
>[    0.729148] usbcore: registered new interface driver cdc_ncm
>[    0.729250] initcall cdc_ncm_driver_init+0x0/0x15 returned 0 after 132 usecs
>[    0.729252] calling  uio_init+0x0/0xe8 @ 1
>[    0.729285] initcall uio_init+0x0/0xe8 returned 0 after 30 usecs
>[    0.729286] calling  cdrom_init+0x0/0x18 @ 1
>[    0.729293] initcall cdrom_init+0x0/0x18 returned 0 after 4 usecs
>[    0.729295] calling  nonstatic_sysfs_init+0x0/0xc @ 1
>[    0.729298] initcall nonstatic_sysfs_init+0x0/0xc returned 0 after 0 usecs
>[    0.729300] calling  yenta_cardbus_driver_init+0x0/0x15 @ 1
>[    0.729341] initcall yenta_cardbus_driver_init+0x0/0x15 returned 0 after 37 usecs
>[    0.729342] calling  mon_init+0x0/0xf4 @ 1
>[    0.729432] initcall mon_init+0x0/0xf4 returned 0 after 85 usecs
>[    0.729434] calling  ehci_hcd_init+0x0/0x57 @ 1
>[    0.729436] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.729540] initcall ehci_hcd_init+0x0/0x57 returned 0 after 101 usecs
>[    0.729541] calling  ehci_pci_init+0x0/0x63 @ 1
>[    0.729544] ehci-pci: EHCI PCI platform driver
>[    0.729721] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.729926] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.730092] ehci-pci 0000:00:1a.0: debug port 2
>[    0.734075] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.734085] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7b1c000
>[    0.739836] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.739958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.740062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.740219] usb usb1: Product: EHCI Host Controller
>[    0.740319] usb usb1: Manufacturer: Linux 3.14.0-rc6_drm-intel-next-queued_b2040f_20140314+ ehci_hcd
>[    0.740480] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.740774] hub 1-0:1.0: USB hub found
>[    0.740891] hub 1-0:1.0: 2 ports detected
>[    0.741128] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.741336] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.741499] ehci-pci 0000:00:1d.0: debug port 2
>[    0.745498] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.745507] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7b1b000
>[    0.750844] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.750969] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.751073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.751231] usb usb2: Product: EHCI Host Controller
>[    0.751331] usb usb2: Manufacturer: Linux 3.14.0-rc6_drm-intel-next-queued_b2040f_20140314+ ehci_hcd
>[    0.753060] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.753597] hub 2-0:1.0: USB hub found
>[    0.753695] hub 2-0:1.0: 2 ports detected
>[    0.754000] initcall ehci_pci_init+0x0/0x63 returned 0 after 23861 usecs
>[    0.754002] calling  isp116x_driver_init+0x0/0xe @ 1
>[    0.754115] initcall isp116x_driver_init+0x0/0xe returned 0 after 96 usecs
>[    0.754118] calling  ohci_hcd_mod_init+0x0/0x5c @ 1
>[    0.754130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.754244] initcall ohci_hcd_mod_init+0x0/0x5c returned 0 after 120 usecs
>[    0.754245] calling  ohci_pci_init+0x0/0x65 @ 1
>[    0.754248] ohci-pci: OHCI PCI platform driver
>[    0.754512] initcall ohci_pci_init+0x0/0x65 returned 0 after 254 usecs
>[    0.754514] calling  uhci_hcd_init+0x0/0xa4 @ 1
>[    0.754517] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.754707] initcall uhci_hcd_init+0x0/0xa4 returned 0 after 182 usecs
>[    0.754710] calling  xhci_hcd_init+0x0/0x12 @ 1
>[    0.754806] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.755107] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    0.755356] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.755372] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
>[    0.755420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.755524] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.755683] usb usb3: Product: xHCI Host Controller
>[    0.755782] usb usb3: Manufacturer: Linux 3.14.0-rc6_drm-intel-next-queued_b2040f_20140314+ xhci_hcd
>[    0.755964] usb usb3: SerialNumber: 0000:00:14.0
>[    0.756371] hub 3-0:1.0: USB hub found
>[    0.756484] hub 3-0:1.0: 14 ports detected
>[    0.758164] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.758466] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    0.758660] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.758758] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.758920] usb usb4: Product: xHCI Host Controller
>[    0.759014] usb usb4: Manufacturer: Linux 3.14.0-rc6_drm-intel-next-queued_b2040f_20140314+ xhci_hcd
>[    0.759166] usb usb4: SerialNumber: 0000:00:14.0
>[    0.759516] hub 4-0:1.0: USB hub found
>[    0.759622] hub 4-0:1.0: 6 ports detected
>[    0.760505] initcall xhci_hcd_init+0x0/0x12 returned 0 after 5650 usecs
>[    0.760507] calling  usb_storage_driver_init+0x0/0x15 @ 1
>[    0.760586] usbcore: registered new interface driver usb-storage
>[    0.760686] initcall usb_storage_driver_init+0x0/0x15 returned 0 after 170 usecs
>[    0.760687] calling  i8042_init+0x0/0x3df @ 1
>[    0.760833] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.771313] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.771418] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.771671] initcall i8042_init+0x0/0x3df returned 0 after 10714 usecs
>[    0.771673] calling  serport_init+0x0/0x2a @ 1
>[    0.771677] initcall serport_init+0x0/0x2a returned 0 after 0 usecs
>[    0.771678] calling  mousedev_init+0x0/0x57 @ 1
>[    0.771749] mousedev: PS/2 mouse device common for all mice
>[    0.771858] initcall mousedev_init+0x0/0x57 returned 0 after 172 usecs
>[    0.771859] calling  evdev_init+0x0/0xc @ 1
>[    0.771863] initcall evdev_init+0x0/0xc returned 0 after 1 usecs
>[    0.771864] calling  atkbd_init+0x0/0x23 @ 1
>[    0.771972] initcall atkbd_init+0x0/0x23 returned 0 after 94 usecs
>[    0.771973] calling  psmouse_init+0x0/0x83 @ 1
>[    0.772109] initcall psmouse_init+0x0/0x83 returned 0 after 129 usecs
>[    0.772110] calling  cmos_init+0x0/0x6d @ 1
>[    0.772123] rtc_cmos 00:06: RTC can wake from S4
>[    0.772367] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>[    0.772494] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.772701] initcall cmos_init+0x0/0x6d returned 0 after 573 usecs
>[    0.772702] calling  i2c_dev_init+0x0/0xc8 @ 1
>[    0.772704] i2c /dev entries driver
>[    0.772851] initcall i2c_dev_init+0x0/0xc8 returned 0 after 143 usecs
>[    0.772854] calling  efivars_sysfs_init+0x0/0x1f4 @ 1
>[    0.772858] initcall efivars_sysfs_init+0x0/0x1f4 returned -19 after 0 usecs
>[    0.772859] calling  hid_init+0x0/0x5c @ 1
>[    0.772941] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.773042] initcall hid_init+0x0/0x5c returned 0 after 175 usecs
>[    0.773043] calling  hid_generic_init+0x0/0x15 @ 1
>[    0.773077] initcall hid_generic_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773079] calling  a4_driver_init+0x0/0x15 @ 1
>[    0.773110] initcall a4_driver_init+0x0/0x15 returned 0 after 27 usecs
>[    0.773111] calling  apple_driver_init+0x0/0x15 @ 1
>[    0.773145] initcall apple_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773147] calling  belkin_driver_init+0x0/0x15 @ 1
>[    0.773178] initcall belkin_driver_init+0x0/0x15 returned 0 after 28 usecs
>[    0.773179] calling  ch_driver_init+0x0/0x15 @ 1
>[    0.773210] initcall ch_driver_init+0x0/0x15 returned 0 after 27 usecs
>[    0.773211] calling  ch_driver_init+0x0/0x15 @ 1
>[    0.773244] initcall ch_driver_init+0x0/0x15 returned 0 after 29 usecs
>[    0.773245] calling  cp_driver_init+0x0/0x15 @ 1
>[    0.773275] initcall cp_driver_init+0x0/0x15 returned 0 after 27 usecs
>[    0.773277] calling  ez_driver_init+0x0/0x15 @ 1
>[    0.773309] initcall ez_driver_init+0x0/0x15 returned 0 after 28 usecs
>[    0.773310] calling  gyration_driver_init+0x0/0x15 @ 1
>[    0.773342] initcall gyration_driver_init+0x0/0x15 returned 0 after 27 usecs
>[    0.773343] calling  ks_driver_init+0x0/0x15 @ 1
>[    0.773374] initcall ks_driver_init+0x0/0x15 returned 0 after 27 usecs
>[    0.773375] calling  lg_driver_init+0x0/0x15 @ 1
>[    0.773408] initcall lg_driver_init+0x0/0x15 returned 0 after 29 usecs
>[    0.773409] calling  ms_driver_init+0x0/0x15 @ 1
>[    0.773439] initcall ms_driver_init+0x0/0x15 returned 0 after 27 usecs
>[    0.773441] calling  mr_driver_init+0x0/0x15 @ 1
>[    0.773471] initcall mr_driver_init+0x0/0x15 returned 0 after 26 usecs
>[    0.773472] calling  ntrig_driver_init+0x0/0x15 @ 1
>[    0.773506] initcall ntrig_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773507] calling  pl_driver_init+0x0/0x15 @ 1
>[    0.773552] initcall pl_driver_init+0x0/0x15 returned 0 after 40 usecs
>[    0.773553] calling  pl_driver_init+0x0/0x15 @ 1
>[    0.773588] initcall pl_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773590] calling  samsung_driver_init+0x0/0x15 @ 1
>[    0.773624] initcall samsung_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773626] calling  sony_driver_init+0x0/0x15 @ 1
>[    0.773660] initcall sony_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773662] calling  sp_driver_init+0x0/0x15 @ 1
>[    0.773697] initcall sp_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773698] calling  ts_driver_init+0x0/0x15 @ 1
>[    0.773733] initcall ts_driver_init+0x0/0x15 returned 0 after 30 usecs
>[    0.773735] calling  hid_init+0x0/0x47 @ 1
>[    0.773772] usbcore: registered new interface driver usbhid
>[    0.773896] usbhid: USB HID core driver
>[    0.773995] initcall hid_init+0x0/0x47 returned 0 after 251 usecs
>[    0.773997] calling  sock_diag_init+0x0/0xc @ 1
>[    0.774003] initcall sock_diag_init+0x0/0xc returned 0 after 2 usecs
>[    0.774005] calling  flow_cache_init_global+0x0/0x177 @ 1
>[    0.774071] initcall flow_cache_init_global+0x0/0x177 returned 0 after 61 usecs
>[    0.774073] calling  blackhole_module_init+0x0/0xc @ 1
>[    0.774077] initcall blackhole_module_init+0x0/0xc returned 0 after 0 usecs
>[    0.774079] calling  gre_offload_init+0x0/0x11 @ 1
>[    0.774082] initcall gre_offload_init+0x0/0x11 returned 0 after 0 usecs
>[    0.774083] calling  sysctl_ipv4_init+0x0/0x7f @ 1
>[    0.774126] initcall sysctl_ipv4_init+0x0/0x7f returned 0 after 39 usecs
>[    0.774128] calling  ipv4_netfilter_init+0x0/0xc @ 1
>[    0.774131] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 0 usecs
>[    0.774132] calling  cubictcp_register+0x0/0x53 @ 1
>[    0.774135] TCP: cubic registered
>[    0.774232] initcall cubictcp_register+0x0/0x53 returned 0 after 95 usecs
>[    0.774234] calling  xfrm_user_init+0x0/0x4b @ 1
>[    0.774236] Initializing XFRM netlink socket
>[    0.774336] initcall xfrm_user_init+0x0/0x4b returned 0 after 97 usecs
>[    0.774337] calling  packet_init+0x0/0x3d @ 1
>[    0.774340] NET: Registered protocol family 17
>[    0.774444] initcall packet_init+0x0/0x3d returned 0 after 101 usecs
>[    0.774446] calling  init_rpcsec_gss+0x0/0x5a @ 1
>[    0.774455] initcall init_rpcsec_gss+0x0/0x5a returned 0 after 6 usecs
>[    0.774457] calling  init_dns_resolver+0x0/0xde @ 1
>[    0.774463] Key type dns_resolver registered
>[    0.774578] initcall init_dns_resolver+0x0/0xde returned 0 after 115 usecs
>[    0.774581] calling  mcheck_init_device+0x0/0xec @ 1
>[    0.774998] initcall mcheck_init_device+0x0/0xec returned 0 after 402 usecs
>[    0.775097] calling  mcheck_debugfs_init+0x0/0x38 @ 1
>[    0.775104] initcall mcheck_debugfs_init+0x0/0x38 returned 0 after 3 usecs
>[    0.775106] calling  severities_debugfs_init+0x0/0x3a @ 1
>[    0.775112] initcall severities_debugfs_init+0x0/0x3a returned 0 after 1 usecs
>[    0.775114] calling  threshold_init_device+0x0/0x40 @ 1
>[    0.775119] initcall threshold_init_device+0x0/0x40 returned 0 after 2 usecs
>[    0.775121] calling  hpet_insert_resource+0x0/0x1e @ 1
>[    0.775126] initcall hpet_insert_resource+0x0/0x1e returned 0 after 0 usecs
>[    0.775128] calling  update_mp_table+0x0/0x436 @ 1
>[    0.775131] initcall update_mp_table+0x0/0x436 returned 0 after 0 usecs
>[    0.775132] calling  lapic_insert_resource+0x0/0x3e @ 1
>[    0.775136] initcall lapic_insert_resource+0x0/0x3e returned 0 after 1 usecs
>[    0.775138] calling  io_apic_bug_finalize+0x0/0x16 @ 1
>[    0.775141] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
>[    0.775143] calling  print_ICs+0x0/0x423 @ 1
>[    0.775146] initcall print_ICs+0x0/0x423 returned 0 after 0 usecs
>[    0.775148] calling  check_early_ioremap_leak+0x0/0x4d @ 1
>[    0.775151] initcall check_early_ioremap_leak+0x0/0x4d returned 0 after 0 usecs
>[    0.775153] calling  pat_memtype_list_init+0x0/0x34 @ 1
>[    0.775159] initcall pat_memtype_list_init+0x0/0x34 returned 0 after 1 usecs
>[    0.775161] calling  init_oops_id+0x0/0x31 @ 1
>[    0.775166] initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs
>[    0.775168] calling  pm_qos_power_init+0x0/0x5a @ 1
>[    0.775309] initcall pm_qos_power_init+0x0/0x5a returned 0 after 134 usecs
>[    0.775311] calling  pm_debugfs_init+0x0/0x21 @ 1
>[    0.775316] initcall pm_debugfs_init+0x0/0x21 returned 0 after 2 usecs
>[    0.775317] calling  printk_late_init+0x0/0x3a @ 1
>[    0.775321] initcall printk_late_init+0x0/0x3a returned 0 after 1 usecs
>[    0.775323] calling  tk_debug_sleep_time_init+0x0/0x39 @ 1
>[    0.775328] initcall tk_debug_sleep_time_init+0x0/0x39 returned 0 after 1 usecs
>[    0.775331] calling  debugfs_kprobe_init+0x0/0x83 @ 1
>[    0.775337] initcall debugfs_kprobe_init+0x0/0x83 returned 0 after 3 usecs
>[    0.775339] calling  taskstats_init+0x0/0x69 @ 1
>[    0.775345] registered taskstats version 1
>[    0.775443] initcall taskstats_init+0x0/0x69 returned 0 after 98 usecs
>[    0.775445] calling  max_swapfiles_check+0x0/0x3 @ 1
>[    0.775451] initcall max_swapfiles_check+0x0/0x3 returned 0 after 2 usecs
>[    0.775453] calling  init_btrfs_fs+0x0/0xff @ 1
>[    0.775772] bio: create slab <bio-1> at 1
>[    0.776173] Btrfs loaded
>[    0.776275] initcall init_btrfs_fs+0x0/0xff returned 0 after 799 usecs
>[    0.776277] calling  init_root_keyring+0x0/0x5 @ 1
>[    0.776288] initcall init_root_keyring+0x0/0x5 returned 0 after 8 usecs
>[    0.776290] calling  prandom_reseed+0x0/0x44 @ 1
>[    0.776314] initcall prandom_reseed+0x0/0x44 returned 0 after 20 usecs
>[    0.776317] calling  pci_resource_alignment_sysfs_init+0x0/0x17 @ 1
>[    0.776321] initcall pci_resource_alignment_sysfs_init+0x0/0x17 returned 0 after 1 usecs
>[    0.776323] calling  pci_sysfs_init+0x0/0x4e @ 1
>[    0.776721] initcall pci_sysfs_init+0x0/0x4e returned 0 after 385 usecs
>[    0.776724] calling  deferred_probe_initcall+0x0/0x65 @ 1
>[    0.776774] initcall deferred_probe_initcall+0x0/0x65 returned 0 after 45 usecs
>[    0.776777] calling  late_resume_init+0x0/0xde @ 1
>[    0.776779]   Magic number: 6:71:161
>[    0.776927] acpi device:28: hash matches
>[    0.777039] initcall late_resume_init+0x0/0xde returned 0 after 252 usecs
>[    0.777041] calling  firmware_memmap_init+0x0/0x2a @ 1
>[    0.777088] initcall firmware_memmap_init+0x0/0x2a returned 0 after 43 usecs
>[    0.777090] calling  pci_mmcfg_late_insert_resources+0x0/0x46 @ 1
>[    0.777096] initcall pci_mmcfg_late_insert_resources+0x0/0x46 returned 0 after 1 usecs
>[    0.777098] calling  tcp_congestion_default+0x0/0xc @ 1
>[    0.777102] initcall tcp_congestion_default+0x0/0xc returned 0 after 0 usecs
>[    0.777106] calling  software_resume+0x0/0x285 @ 1
>[    0.777108] PM: Hibernation image not present or could not be loaded.
>[    0.777111] initcall software_resume+0x0/0x285 returned -2 after 2 usecs
>[    0.777125] Warning: unable to open an initial console.
>[    0.777226] async_waiting @ 1
>[    0.784009] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.027126] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.027248] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.029962] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    1.029967] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    1.030141] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.031323] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208DB, TM00, max UDMA/100
>[    1.032307] ata5.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133
>[    1.032414] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.034971] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    1.034975] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    1.035146] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.037358] ata5.00: configured for UDMA/133
>[    1.037487] async_waiting @ 1117
>[    1.038083] ata1.00: configured for UDMA/100
>[    1.042252] async_waiting @ 6
>[    1.042257] async_continuing @ 6 after 0 usec
>[    1.043168] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.050483] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208DB  TM00 PQ: 0 ANSI: 5
>[    1.076566] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.076727] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.077269] sr 0:0:0:0: Attached scsi CD-ROM sr0
>[    1.077644] sr 0:0:0:0: Attached scsi generic sg0 type 5
>[    1.077901] initcall 1_async_port_probe+0x0/0x45 returned 0 after 347353 usecs
>[    1.077918] async_continuing @ 40 after 347317 usec
>[    1.077927] initcall 2_async_port_probe+0x0/0x45 returned 0 after 347330 usecs
>[    1.077957] async_continuing @ 1115 after 347284 usec
>[    1.077964] initcall 3_async_port_probe+0x0/0x45 returned 0 after 347301 usecs
>[    1.077974] async_continuing @ 1116 after 347240 usec
>[    1.077981] initcall 4_async_port_probe+0x0/0x45 returned 0 after 347256 usecs
>[    1.077990] async_continuing @ 1117 after 39518 usec
>[    1.078050] scsi 4:0:0:0: Direct-Access     ATA      WDC WD7500BPKT-2 01.0 PQ: 0 ANSI: 5
>[    1.078479] calling  7_sd_probe_async+0x0/0x1c2 @ 1116
>[    1.078508] sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>[    1.078654] sd 4:0:0:0: Attached scsi generic sg1 type 0
>[    1.078747] initcall 5_async_port_probe+0x0/0x45 returned 0 after 347943 usecs
>[    1.078757] async_continuing @ 1118 after 347877 usec
>[    1.078762] initcall 6_async_port_probe+0x0/0x45 returned 0 after 347896 usecs
>[    1.078841] sd 4:0:0:0: [sda] 4096-byte physical blocks
>[    1.078968] sd 4:0:0:0: [sda] Write Protect is off
>[    1.079066] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.079073] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.157635] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    1.157742] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.158398] hub 1-1:1.0: USB hub found
>[    1.158598] hub 1-1:1.0: 6 ports detected
>[    1.261321] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.375815] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    1.375919] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.376577] hub 2-1:1.0: USB hub found
>[    1.376774] hub 2-1:1.0: 8 ports detected
>[    1.442345]  sda: sda1 sda2
>[    1.443214] sd 4:0:0:0: [sda] Attached SCSI disk
>[    1.443321] initcall 7_sd_probe_async+0x0/0x1c2 returned 0 after 355994 usecs
>[    1.443346] async_continuing @ 1 after 649979 usec
>[    1.445979] Freeing unused kernel memory: 22712K (ffffffff81b52000 - ffffffff83180000)
>[    1.473749] dracut: dracut-018-35.git20120510.fc17
>[    1.494992] udevd[1371]: starting version 182
>[    1.506312] calling  drm_core_init+0x0/0x107 [drm] @ 1379
>[    1.506355] [drm] Initialized drm 1.1.0 20060810
>[    1.506479] initcall drm_core_init+0x0/0x107 [drm] returned 0 after 153 usecs
>[    1.506803] calling  acpi_button_driver_init+0x0/0xc [button] @ 1379
>[    1.506874] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input3
>[    1.510499] ACPI: Lid Switch [LID0]
>[    1.510677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>[    1.510893] ACPI: Power Button [PWRB]
>[    1.511047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    1.511248] ACPI: Power Button [PWRF]
>[    1.511395] initcall acpi_button_driver_init+0x0/0xc [button] returned 0 after 4474 usecs
>[    1.511580] calling  acpi_video_init+0x0/0x8b [video] @ 1379
>[    1.511593] initcall acpi_video_init+0x0/0x8b [video] returned 0 after 10 usecs
>[    1.512850] calling  i915_init+0x0/0x6b [i915] @ 1379
>[    1.513189] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.513189] [drm:intel_detect_pch], Found LynxPoint PCH
>[    1.513315] [drm] Memory usable by graphics device = 2048M
>[    1.513315] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    1.513316] [drm:i915_gem_gtt_init], GTT stolen size = 32M
>[    1.522709] [drm:intel_opregion_setup], graphic opregion physical addr: 0xabb62018
>[    1.522714] [drm:intel_opregion_setup], Public ACPI methods supported
>[    1.522715] [drm:intel_opregion_setup], SWSCI supported
>[    1.529536] [drm:swsci_setup], SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    1.529539] [drm:intel_opregion_setup], ASLE supported
>[    1.529597] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[    1.529605] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.529710] [drm] Driver supports precise vblank timestamp query.
>[    1.529811] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz
>[    1.529813] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
>[    1.529816] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.529817] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    1.529820] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    1.529822] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x8 0xa
>[    1.529824] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c
>[    1.529826] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 5, level 255
>[    1.529828] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    1.529830] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.529831] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    1.529833] [drm:parse_mipi], No MIPI BDB found
>[    1.529835] [drm:parse_ddi_port], Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.529837] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
>[    1.529839] [drm:parse_ddi_port], Port D VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.529840] [drm:parse_ddi_port], VBT HDMI level shift for port D: 7
>[    1.529849] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    1.529854] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at ad200000
>[    1.529856] [drm:intel_display_power_get], enabling always-on
>[    1.529858] [drm:intel_display_power_get], enabling display
>[    1.529861] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.530054] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
>[    1.530055] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
>[    1.530056] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
>[    1.530058] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
>[    1.530059] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
>[    1.530061] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
>[    1.530062] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
>[    1.530063] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
>[    1.530064] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
>[    1.530066] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
>[    1.530067] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
>[    1.530068] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
>[    1.530070] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
>[    1.530071] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
>[    1.530072] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
>[    1.530074] [drm:intel_modeset_init], 3 display pipes available.
>[    1.530088] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz
>[    1.530611] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[    1.530615] [drm:intel_dp_init_connector], Adding eDP connector on port A
>[    1.530727] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 750 t11_t12 6000
>[    1.530730] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 750 t11_t12 5000
>[    1.530732] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 75, power cycle delay 600
>[    1.530733] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    1.530735] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[    1.530738] [drm:edp_panel_vdd_on], Turning eDP VDD on
>[    1.530746] [drm:edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.531479] usb 3-1: new high-speed USB device number 2 using xhci_hcd
>[    1.531596] [drm:intel_dp_get_dpcd], DPCD: 12 0a c2 41 00 00 01 80 02 00 00 00 1f 0b 00
>[    1.531777] [drm:intel_dp_get_dpcd], Displayport TPS3 supported
>[    1.531786] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x2ee0001, PP_DIV 0x186906
>[    1.533050] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    1.555966] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>[    1.566752] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    1.566759] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    1.566814] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 5273/5273, sysfs interface registered
>[    1.634551] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    1.634553] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[    1.634556] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[    1.634558] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
>[    1.634561] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A
>[    1.634567] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe A
>[    1.634570] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe A
>[    1.634573] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: enabled
>[    1.634576] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[    1.634578] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:HDMI-A-1] hw state readout: disabled
>[    1.634579] [drm:intel_modeset_setup_hw_state], [CRTC:3] found active mode: 
>[    1.634582] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 138499 1920 1968 2000 2080 1080 1083 1088 1111 0x0 0x5
>[    1.634584] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    1.634586] [drm:intel_dump_pipe_config], cpu_transcoder: D
>[    1.634587] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
>[    1.634589] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.634591] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 4840925, gmch_n: 8388608, link_m: 268940, link_n: 524288, tu: 64
>[    1.634592] [drm:intel_dump_pipe_config], requested mode:
>[    1.634594] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.634596] [drm:intel_dump_pipe_config], adjusted mode:
>[    1.634598] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    1.634600] [drm:intel_dump_crtc_timings], crtc timings: 138499 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x0 flags: 0x5
>[    1.634601] [drm:intel_dump_pipe_config], port clock: 270000
>[    1.634603] [drm:intel_dump_pipe_config], pipe src size: 720x400
>[    1.634605] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.634606] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.634607] [drm:intel_dump_pipe_config], ips: 0
>[    1.634609] [drm:intel_dump_pipe_config], double wide: 0
>[    1.634611] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[    1.634612] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    1.634613] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    1.634615] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.634617] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.634618] [drm:intel_dump_pipe_config], requested mode:
>[    1.634620] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.634621] [drm:intel_dump_pipe_config], adjusted mode:
>[    1.634623] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.634625] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.634626] [drm:intel_dump_pipe_config], port clock: 0
>[    1.634628] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    1.634629] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.634631] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.634632] [drm:intel_dump_pipe_config], ips: 0
>[    1.634633] [drm:intel_dump_pipe_config], double wide: 0
>[    1.634635] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[    1.634636] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[    1.634637] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    1.634639] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.634640] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.634642] [drm:intel_dump_pipe_config], requested mode:
>[    1.634644] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.634645] [drm:intel_dump_pipe_config], adjusted mode:
>[    1.634647] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.634649] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.634650] [drm:intel_dump_pipe_config], port clock: 0
>[    1.634651] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    1.634653] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.634654] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.634655] [drm:intel_dump_pipe_config], ips: 0
>[    1.634657] [drm:intel_dump_pipe_config], double wide: 0
>[    1.634661] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    1.634663] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    1.634665] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    1.634667] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    1.634668] [drm:check_crtc_state], [CRTC:3]
>[    1.634673] [drm:check_crtc_state], [CRTC:5]
>[    1.634675] [drm:check_crtc_state], [CRTC:7]
>[    1.634679] [drm:ironlake_get_plane_config], pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 7680, size 0x2ee000
>[    1.634681] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=2ee000
>[    1.634683] [drm:i915_pages_create_for_stolen], offset=0x0, size=3072000
>[    1.634686] [drm:intel_alloc_plane_obj], plane fb obj ffff8802419d0000
>[    1.634688] [drm:i915_gem_setup_global_gtt], reserving preallocated space: 0 + 2ee000
>[    1.634690] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [2ee000, 7ffff000]
>[    1.636617] [drm:gen6_ppgtt_init], Allocated pde space (2M) at GTT entry: 300
>[    1.636620] [drm:i915_gem_context_init], HW context support initialized
>[    1.636625] [drm:init_status_page], render ring hws offset: 0x00500000
>[    1.638553] [drm:init_pipe_control], render ring pipe control offset: 0x00521000
>[    1.638559] [drm:init_status_page], bsd ring hws offset: 0x00522000
>[    1.638606] [drm:init_status_page], blitter ring hws offset: 0x00543000
>[    1.638651] [drm:init_status_page], video enhancement ring hws offset: 0x00564000
>[    1.638823] [drm:intel_fbdev_init_bios], found possible fb from plane A
>[    1.638825] [drm:intel_fbdev_init_bios], pipe B not active or no fb, skipping
>[    1.638826] [drm:intel_fbdev_init_bios], pipe C not active or no fb, skipping
>[    1.638827] [drm:intel_fbdev_init_bios], checking plane A for BIOS fb
>[    1.638828] [drm:intel_fbdev_init_bios], pipe A area: 2073600
>[    1.638830] [drm:intel_fbdev_init_bios], total size 8294400 (bpp 4)
>[    1.638831] [drm:intel_fbdev_init_bios], fb not big enough for plane A (8294400 vs 3072000)
>[    1.638833] [drm:intel_fbdev_init_bios], BIOS fb not suitable for all pipes, not using
>[    1.638842] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[    1.638844] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1]
>[    1.639039] [drm:intel_dp_probe_oui], Sink OUI: 0022b9
>[    1.639220] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    1.639225] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    1.639228] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[    1.639231] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[    1.639232] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    1.639234] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    1.639237] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    1.648553] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    1.648554] [drm:intel_crt_detect], CRT not detected via hotplug
>[    1.648710] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    1.648712] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    1.648713] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.648715] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.649097] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    1.649098] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.649100] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.649102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    1.649103] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[    1.649105] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[    1.649265] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.649266] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
>[    1.649268] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[    1.649269] [drm:drm_setup_crtcs], 
>[    1.649271] [drm:drm_enable_connectors], connector 12 enabled? yes
>[    1.649272] [drm:drm_enable_connectors], connector 9 enabled? no
>[    1.649273] [drm:drm_enable_connectors], connector 20 enabled? no
>[    1.649275] [drm:intel_fb_initial_config], looking for cmdline mode on connector 12
>[    1.649276] [drm:intel_fb_initial_config], looking for preferred mode on connector 12
>[    1.649278] [drm:intel_fb_initial_config], connector eDP-1 on crtc 3: 1920x1080
>[    1.649279] [drm:intel_fb_initial_config], connector 9 not enabled, skipping
>[    1.649280] [drm:intel_fb_initial_config], connector 20 not enabled, skipping
>[    1.649282] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[    1.649284] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    1.649285] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
>[    1.649287] [drm:i915_pages_create_for_stolen], offset=0x2ee000, size=8294400
>[    1.650408] [drm:intelfb_create], allocated 1920x1080 fb: 0x00585000, bo ffff8802419d1080
>[    1.650488] fbcon: inteldrmfb (fb0) is primary device
>[    1.651542] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[    1.651559] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    1.651562] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 138499 1920 1968 2000 2080 1080 1083 1088 1111 0x0 0x5
>[    1.651564] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[    1.651565] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
>[    1.651566] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    1.651568] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.651570] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[    1.651572] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138500KHz
>[    1.651573] [drm:intel_dp_compute_config], clamping bpp for eDP panel to BIOS-provided 18
>[    1.651574] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 18
>[    1.651575] [drm:intel_dp_compute_config], DP link bw required 249300 available 259200
>[    1.651576] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    1.651577] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    1.651578] [drm:intel_dump_pipe_config], cpu_transcoder: D
>[    1.651578] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    1.651580] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.651581] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 4034104, gmch_n: 4194304, link_m: 224116, link_n: 262144, tu: 64
>[    1.651582] [drm:intel_dump_pipe_config], requested mode:
>[    1.651584] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[    1.651584] [drm:intel_dump_pipe_config], adjusted mode:
>[    1.651586] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[    1.651588] [drm:intel_dump_crtc_timings], crtc timings: 138500 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0xa
>[    1.651599] [drm:intel_dump_pipe_config], port clock: 162000
>[    1.651600] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[    1.651601] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.651602] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.651602] [drm:intel_dump_pipe_config], ips: 0
>[    1.651603] [drm:intel_dump_pipe_config], double wide: 0
>[    1.651608] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    1.651612] [drm:intel_edp_backlight_off], 
>[    1.667754] [drm:intel_edp_panel_off], Turn eDP power off
>[    1.673576] tsc: Refined TSC clocksource calibration: 2394.455 MHz
>[    1.710779] usb 3-1: New USB device found, idVendor=0b95, idProduct=772b
>[    1.710781] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.710782] usb 3-1: Product: AX88772B
>[    1.710783] usb 3-1: Manufacturer: ASIX Elec. Corp.
>[    1.710784] usb 3-1: SerialNumber: 00022E
>[    1.852718] [drm:wait_panel_off], Wait for panel power off time
>[    1.852721] [drm:wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.929802] [drm:wait_panel_status], Wait complete
>[    1.929805] [drm:intel_update_fbc], no output, disabling
>[    1.929807] [drm:intel_display_power_put], disabling display
>[    1.929808] [drm:hsw_set_power_well], Requesting to disable the power well
>[    1.929821] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to 68080
>[    1.929824] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to 68070
>[    1.929825] [drm:intel_uncore_check_errors] *ERROR* Unclaimed register before interrupt
>[    1.929826] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to 68074
>[    1.929829] [drm:ironlake_update_plane], Writing base 00585000 00000000 0 0 7680
>[    1.929835] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1080]
>[    1.929836] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[    1.929837] [drm:intel_edp_panel_on], Turn eDP power on
>[    1.929839] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[    2.015589] asix 3-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:91:23
>[    2.168025] usb 3-7: new full-speed USB device number 3 using xhci_hcd
>[    2.333035] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
>[    2.333037] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.333038] usb 3-7: Product: RT Bluetooth Radio
>[    2.333039] usb 3-7: Manufacturer: Realtek
>[    2.333040] usb 3-7: SerialNumber: 00e04c000001
>[    2.454281] [drm:wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.498307] [drm:wait_panel_status], Wait complete
>[    2.498311] [drm:wait_panel_on], Wait for panel power on
>[    2.498316] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.674662] Switched to clocksource tsc
>[    2.707469] [drm:wait_panel_status], Wait complete
>[    2.708585] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    2.709045] [drm:intel_dp_start_link_train], clock recovery OK
>[    2.709806] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    2.710061] [drm:intel_edp_backlight_on], 
>[    2.710065] [drm:intel_panel_enable_backlight], pipe A
>[    2.710069] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[    2.710074] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[    2.722505] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.724415] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[    2.727423] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    2.727427] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    2.727429] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    2.727431] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    2.727432] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    2.727433] [drm:check_crtc_state], [CRTC:3]
>[    2.727438] [drm:check_crtc_state], [CRTC:5]
>[    2.727438] [drm:check_crtc_state], [CRTC:7]
>[    2.727441] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    2.727443] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.727445] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.727446] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    2.727447] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    2.727448] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.727468] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[    2.727469] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.727470] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.733885] Console: switching to colour frame buffer device 240x67
>[    2.733893] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[    2.733895] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.733896] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.738068] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.738087] i915 0000:00:02.0: registered panic notifier
>[    2.738355] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    2.743180] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
>[    2.743286] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
>[    2.743322] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff880247065820), AE_NOT_FOUND (20131218/psparse-536)
>[    2.743450] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input6
>[    2.744264] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.744464] [drm:asle_set_backlight], bclp = 0x800000ff
>[    2.744466] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    2.744467] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5100
>[    2.744532] acpi device:64: registered as cooling_device13
>[    2.744620] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
>[    2.744713] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.744779] initcall i915_init+0x0/0x6b [i915] returned 0 after 1202067 usecs
>[    2.747088] dracut: Starting plymouth daemon
>[    2.752965] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[    2.752968] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.752969] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759112] [drm:i915_gem_open], 
>[    2.759131] [drm:intel_crtc_cursor_set], cursor off
>[    2.759134] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[    2.759136] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.759138] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759140] [drm:intel_crtc_cursor_set], cursor off
>[    2.759141] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    2.759143] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.759144] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759146] [drm:intel_crtc_cursor_set], cursor off
>[    2.759147] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    2.759149] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    2.759150] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759157] [drm:i915_gem_open], 
>[    2.759163] [drm:intel_crtc_cursor_set], cursor off
>[    2.759165] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[    2.759166] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    2.759168] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759169] [drm:intel_crtc_cursor_set], cursor off
>[    2.759170] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    2.759172] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.759173] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759175] [drm:intel_crtc_cursor_set], cursor off
>[    2.759176] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    2.759177] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    2.759178] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    2.759182] [drm:i915_gem_open], 
>[    2.759224] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[    2.759226] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[    2.759231] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    2.759233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[    2.759236] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1]
>[    2.759239] [drm:edp_panel_vdd_on], Turning eDP VDD on
>[    2.759247] [drm:edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    2.759445] [drm:intel_dp_probe_oui], Sink OUI: 0022b9
>[    2.759616] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    2.759625] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    2.759628] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[    2.759632] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[    2.759635] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    2.763940] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    2.763944] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    2.763946] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    2.763950] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    2.763951] [drm:intel_crt_detect], CRT not detected via hotplug
>[    2.764116] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.764118] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.764119] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.764121] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.764507] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.764508] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.764510] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.764512] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    2.764515] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    2.764517] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    2.764519] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    2.764522] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    2.764523] [drm:intel_crt_detect], CRT not detected via hotplug
>[    2.764676] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.764677] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.764679] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.764680] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.765062] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.765063] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.765064] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.765066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    2.765070] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    2.765072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[    2.765074] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[    2.765232] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    2.765233] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
>[    2.765235] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[    2.765237] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    2.765239] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[    2.765240] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[    2.765398] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    2.765399] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
>[    2.765401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[    2.803765] calling  acpi_cpufreq_init+0x0/0x1c6 [acpi_cpufreq] @ 1617
>[    2.804474] initcall acpi_cpufreq_init+0x0/0x1c6 [acpi_cpufreq] returned 0 after 686 usecs
>[    2.805827] calling  acpi_wmi_init+0x0/0x6a [wmi] @ 1617
>[    2.806668] wmi: Mapper loaded
>[    2.806694] initcall acpi_wmi_init+0x0/0x6a [wmi] returned 0 after 841 usecs
>[    2.806843] calling  acpi_ac_init+0x0/0x34 [ac] @ 1603
>[    2.806867] calling  acpi_battery_init+0x0/0x13 [battery] @ 1620
>[    2.806873] initcall acpi_battery_init+0x0/0x13 [battery] returned 0 after 2 usecs
>[    2.807519] calling  init_tis+0x0/0xb3 [tpm_tis] @ 1609
>[    2.807560] initcall init_tis+0x0/0xb3 [tpm_tis] returned 0 after 33 usecs
>[    2.813082] calling  init_soundcore+0x0/0x9b [soundcore] @ 1612
>[    2.813108] initcall init_soundcore+0x0/0x9b [soundcore] returned 0 after 21 usecs
>[    2.813411] calling  alsa_sound_init+0x0/0x93 [snd] @ 1612
>[    2.813426] initcall alsa_sound_init+0x0/0x93 [snd] returned 0 after 9 usecs
>[    2.813589] calling  alsa_timer_init+0x0/0x17c [snd_timer] @ 1612
>[    2.813638] initcall alsa_timer_init+0x0/0x17c [snd_timer] returned 0 after 43 usecs
>[    2.814121] calling  alsa_pcm_init+0x0/0x67 [snd_pcm] @ 1612
>[    2.814128] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 1 usecs
>[    2.814306] calling  alsa_hwdep_init+0x0/0x5f [snd_hwdep] @ 1612
>[    2.814311] initcall alsa_hwdep_init+0x0/0x5f [snd_hwdep] returned 0 after 1 usecs
>[    2.815077] calling  azx_driver_init+0x0/0x1a [snd_hda_intel] @ 1612
>[    2.815302] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[    2.815306] [drm:intel_display_power_get], enabling display
>[    2.815309] [drm:hsw_set_power_well], Enabling power well
>[    2.815335] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X
>[    2.815395] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[    2.815550] initcall azx_driver_init+0x0/0x1a [snd_hda_intel] returned 0 after 456 usecs
>[    2.816226] calling  lpc_ich_driver_init+0x0/0x1a [lpc_ich] @ 1625
>[    2.816300] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
>[    2.816389] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.816442] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258)
>[    2.816524] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258)
>[    2.816606] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c5f (\_SB_.PCI0.PEG0.PEGP.GPR_) (20131218/utaddress-258)
>[    2.816696] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.816748] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258)
>[    2.816829] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258)
>[    2.816907] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c5f (\_SB_.PCI0.PEG0.PEGP.GPR_) (20131218/utaddress-258)
>[    2.818840] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.820100] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    2.823615] ACPI: AC Adapter [ADP1] (on-line)
>[    2.823625] calling  i2c_i801_init+0x0/0xa4 [i2c_i801] @ 1926
>[    2.823651] initcall lpc_ich_driver_init+0x0/0x1a [lpc_ich] returned 0 after 7239 usecs
>[    2.824403] calling  patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] @ 2267
>[    2.824406] initcall patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] returned 0 after 0 usecs
>[    2.824900] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[    2.826128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.827954] initcall acpi_ac_init+0x0/0x34 [ac] returned 0 after 20594 usecs
>[    2.827972] calling  iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] @ 1617
>[    2.827974] iTCO_vendor_support: vendor-support=0
>[    2.828031] calling  pcspkr_platform_driver_init+0x0/0x13 [pcspkr] @ 2253
>[    2.830012] initcall iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] returned 0 after 1986 usecs
>[    2.830430] initcall i2c_i801_init+0x0/0xa4 [i2c_i801] returned 0 after 6637 usecs
>[    2.830456] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.832056] calling  iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] @ 1617
>[    2.832057] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    2.832226] initcall pcspkr_platform_driver_init+0x0/0x13 [pcspkr] returned 0 after 4089 usecs
>[    2.832547] calling  patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] @ 2327
>[    2.832550] initcall patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] returned 0 after 0 usecs
>[    2.834140] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    2.835492] ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x4037b22d
>[    2.835493] ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1
>[    2.835494] ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x1
>[    2.835495] ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000007
>[    2.835496] ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x000000b2
>[    2.835496] ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x5
>[    2.835497] ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x1
>[    2.835498] ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0
>[    2.835499] ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1
>[    2.835782] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=2 (0x1b/0x16/0x0/0x0/0x0) type:speaker
>[    2.835784] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    2.835785] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    2.835786] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    2.835787] ALSA sound/pci/hda/hda_auto_parser.c:405    dig-out=0x1e/0x0
>[    2.835787] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    2.835789] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x19
>[    2.835790] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[    2.835791] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x4037b22d for NID 0x1d
>[    2.835793] ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0xb22d CODEC_ID=10ec0892
>[    2.836301] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.837653] initcall iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] returned 0 after 5456 usecs
>[    3.020777] ACPI: Battery Slot [BAT1] (battery present)
>[    3.208994] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.255664] random: nonblocking pool is initialized
>[    3.320517] dracut: Checking ext4: /dev/sda2
>[    3.322038] dracut: issuing e2fsck -a  /dev/sda2
>[    3.397581] dracut: /dev/sda2: clean, 1644312/44802048 files, 25153919/179200000 blocks
>[    3.399300] dracut: Remounting /dev/sda2 with -o ro
>[    3.419024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.488296] dracut: Mounted root filesystem /dev/sda2
>[    3.540571] calling  dm_init+0x0/0x43 [dm_mod] @ 2585
>[    3.540685] device-mapper: uevent: version 1.0.3
>[    3.542018] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    3.543242] initcall dm_init+0x0/0x43 [dm_mod] returned 0 after 2600 usecs
>[    3.634159] dracut: Switching root
>[    4.089272] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    4.165846] systemd[1]: Failed to insert module 'ipv6'
>[    4.180759] systemd[1]: Set hostname to <x-hswm24>.
>[    4.440678] LVM: Logical Volume autoactivation enabled.
>[    4.442113] LVM: Activation generator successfully completed.
>[    4.543902] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[    4.543911] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.713386] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    4.714914] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    4.716206] systemd[1]: Starting Syslog Socket.
>[    4.717444] systemd[1]: Listening on Syslog Socket.
>[    4.718700] systemd[1]: Starting Collect Read-Ahead Data...
>[    4.720227] systemd[1]: Starting Replay Read-Ahead Data...
>[    4.721539] systemd-readahead[2613]: Failed to create fanotify object: Function not implemented
>[    4.724230] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    4.724840] systemd-readahead[2615]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    4.727880] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    4.729184] systemd[1]: Starting Delayed Shutdown Socket.
>[    4.730827] systemd[1]: Listening on Delayed Shutdown Socket.
>[    4.730837] systemd[1]: Starting Journal Socket.
>[    4.734703] systemd[1]: Listening on Journal Socket.
>[    4.734725] systemd[1]: Mounting Huge Pages File System...
>[    4.737488] systemd[1]: Starting Journal Service...
>[    4.741078] systemd[1]: Started Journal Service.
>[    4.741278] systemd[1]: Starting Encrypted Volumes.
>[    4.744666] systemd[1]: Reached target Encrypted Volumes.
>[    4.744688] systemd[1]: Mounting POSIX Message Queue File System...
>[    4.748299] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    4.750415] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    4.750429] systemd[1]: Mounting Debug File System...
>[    4.753991] systemd[1]: Starting Create static device nodes in /dev...
>[    4.756167] systemd[1]: Starting udev Kernel Socket.
>[    4.758193] systemd[1]: Listening on udev Kernel Socket.
>[    4.758229] systemd[1]: Starting udev Control Socket.
>[    4.760352] systemd[1]: Listening on udev Control Socket.
>[    4.760390] systemd[1]: Starting udev Coldplug all Devices...
>[    4.763648] systemd[1]: Starting LVM2 metadata daemon socket.
>[    4.765460] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    4.765469] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    4.767524] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    4.767534] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    4.770694] systemd[1]: Expecting device dev-disk-by\x2duuid-246899e7\x2d3c09\x2d4de8\x2d8154\x2d8a145243e192.device...
>[    4.772564] systemd[1]: Mounting Temporary Directory...
>[    4.853902] systemd[1]: Started Replay Read-Ahead Data.
>[    4.854110] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    4.856308] systemd[1]: Started Collect Read-Ahead Data.
>[    4.871640] systemd[1]: Starting Load legacy module configuration...
>[    4.873337] systemd[1]: Started File System Check on Root Device.
>[    4.873352] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    5.191415] systemd[1]: Starting Apply Kernel Variables...
>[    5.193065] systemd[1]: Starting Setup Virtual Console...
>[    5.257960] systemd[1]: Started Set Up Additional Binary Formats.
>[    5.259766] systemd[1]: Started Load Kernel Modules.
>[    5.261013] systemd[1]: Mounted Configuration File System.
>[    5.262080] systemd[1]: Mounting FUSE Control File System...
>[    5.713710] systemd-udevd[2632]: starting version 204
>[    5.805133] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    7.647878] audit: type=1305 audit(1394770178.627:2): audit_pid=3627 old=0 auid=4294967295 ses=4294967295 res=1
>[    7.965766] systemd-udevd[3589]: renamed network interface eth0 to enp0s20u1
>[    8.982969] Adding 4194300k swap on /dev/sda1.  Priority:-1 extents:1 across:4194300k 
>[   13.677071] asix 3-1:1.0 enp0s20u1: link down
>[   15.470833] asix 3-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0x43E1
>[   18.985598] [drm:intel_crtc_cursor_set], cursor off
>[   18.985604] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[   18.985607] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   18.985610] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   18.985612] [drm:intel_crtc_cursor_set], cursor off
>[   18.985613] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   18.985615] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   18.985616] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   18.985618] [drm:intel_crtc_cursor_set], cursor off
>[   18.985619] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   18.985620] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   18.985622] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   20.014759] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[   20.014761] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   20.014763] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   93.816216] [drm:i915_gem_open], 
>[   93.816244] [drm:intel_crtc_cursor_set], cursor off
>[   93.816247] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[   93.816250] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   93.816252] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   93.816254] [drm:intel_crtc_cursor_set], cursor off
>[   93.816256] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   93.816257] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   93.816259] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   93.816260] [drm:intel_crtc_cursor_set], cursor off
>[   93.816262] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   93.816263] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   93.816264] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   93.816274] [drm:i915_gem_open], 
>[   93.816667] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   93.816673] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   93.816680] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   93.816682] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   93.816686] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   93.816688] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[   93.816691] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1]
>[   93.816694] [drm:edp_panel_vdd_on], Turning eDP VDD on
>[   93.816702] [drm:edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   93.816916] [drm:intel_dp_probe_oui], Sink OUI: 0022b9
>[   93.817096] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   93.817106] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   93.817110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[   93.817114] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[   93.817119] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   93.817128] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   93.817131] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   93.817147] [drm:drm_mode_addfb], [FB:24]
>[   94.015508] [drm:drm_mode_setcrtc], [CRTC:3]
>[   94.015512] [drm:drm_mode_setcrtc], [CONNECTOR:12:eDP-1]
>[   94.015514] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
>[   94.015515] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[   94.015517] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[   94.015519] [drm:drm_mode_debug_printmodeline], Modeline 25:"1024x768" 59 63500 1024 1072 1176 1328 768 771 775 798 0x0 0x0
>[   94.015520] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
>[   94.015522] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   94.015523] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   94.015525] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[   94.015527] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138500KHz
>[   94.015528] [drm:intel_dp_compute_config], clamping bpp for eDP panel to BIOS-provided 18
>[   94.015530] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 18
>[   94.015531] [drm:intel_dp_compute_config], DP link bw required 249300 available 259200
>[   94.015533] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[   94.015534] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[   94.015535] [drm:intel_dump_pipe_config], cpu_transcoder: D
>[   94.015536] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[   94.015537] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   94.015538] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 4034104, gmch_n: 4194304, link_m: 224116, link_n: 262144, tu: 64
>[   94.015539] [drm:intel_dump_pipe_config], requested mode:
>[   94.015541] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 59 63500 1024 1072 1176 1328 768 771 775 798 0x0 0x0
>[   94.015542] [drm:intel_dump_pipe_config], adjusted mode:
>[   94.015544] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[   94.015545] [drm:intel_dump_crtc_timings], crtc timings: 138500 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0xa
>[   94.015546] [drm:intel_dump_pipe_config], port clock: 162000
>[   94.015547] [drm:intel_dump_pipe_config], pipe src size: 1024x768
>[   94.015548] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   94.015549] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00f00000, size: 0x05a00438, enabled
>[   94.015550] [drm:intel_dump_pipe_config], ips: 0
>[   94.015551] [drm:intel_dump_pipe_config], double wide: 0
>[   94.019063] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[   94.019067] [drm:intel_edp_backlight_off], 
>[   94.035271] [drm:intel_edp_panel_off], Turn eDP power off
>[   94.220238] [drm:wait_panel_off], Wait for panel power off time
>[   94.220243] [drm:wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0000
>[   94.297305] [drm:wait_panel_status], Wait complete
>[   94.297313] [drm:intel_update_fbc], no output, disabling
>[   94.298722] [drm:ironlake_update_plane], Writing base 00D80000 00000000 0 0 4096
>[   94.298726] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1024x768]
>[   94.298727] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[   94.298729] [drm:intel_edp_panel_on], Turn eDP power on
>[   94.298731] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   94.821755] [drm:wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0000
>[   94.876756] [drm:wait_panel_status], Wait complete
>[   94.876760] [drm:wait_panel_on], Wait for panel power on
>[   94.876765] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[   95.085924] [drm:wait_panel_status], Wait complete
>[   95.087024] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[   95.087486] [drm:intel_dp_start_link_train], clock recovery OK
>[   95.088248] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[   95.088502] [drm:intel_edp_backlight_on], 
>[   95.088506] [drm:intel_panel_enable_backlight], pipe A
>[   95.088510] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5100
>[   95.088516] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[   95.105939] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[   95.105943] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[   95.105945] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[   95.105947] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[   95.105949] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[   95.105951] [drm:check_crtc_state], [CRTC:3]
>[   95.105956] [drm:check_crtc_state], [CRTC:5]
>[   95.105958] [drm:check_crtc_state], [CRTC:7]
>[   95.105966] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   95.105969] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   95.105972] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   95.105974] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   95.105976] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   95.105979] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   95.105981] [drm:intel_crt_detect], CRT not detected via hotplug
>[   95.106142] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   95.106143] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   95.106145] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   95.106146] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   95.106529] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   95.106530] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   95.106531] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   95.106533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   95.106536] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   95.106537] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   95.106539] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   95.106541] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   95.106543] [drm:intel_crt_detect], CRT not detected via hotplug
>[   95.106700] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   95.106702] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   95.106703] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   95.106704] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   95.107085] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   95.107087] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   95.107089] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   95.107091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   95.107094] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   95.107096] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[3] ENCODERS[3]
>[   95.107098] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   95.107100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   95.107102] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   95.107260] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   95.107262] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
>[   95.107263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   95.107265] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   95.107267] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   95.107268] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   95.107427] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   95.107428] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
>[   95.107430] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  105.135214] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[  105.135216] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  105.135219] [drm:drm_mode_debug_printmodeline], Modeline 25:"1024x768" 59 63500 1024 1072 1176 1328 768 771 775 798 0x0 0x0
>[  105.135221] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  105.135222] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
>[  105.135224] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  105.135226] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  105.135227] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[  105.135230] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138500KHz
>[  105.135231] [drm:intel_dp_compute_config], clamping bpp for eDP panel to BIOS-provided 18
>[  105.135232] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 18
>[  105.135233] [drm:intel_dp_compute_config], DP link bw required 249300 available 259200
>[  105.135235] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  105.135236] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  105.135237] [drm:intel_dump_pipe_config], cpu_transcoder: D
>[  105.135238] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  105.135239] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  105.135240] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 4034104, gmch_n: 4194304, link_m: 224116, link_n: 262144, tu: 64
>[  105.135241] [drm:intel_dump_pipe_config], requested mode:
>[  105.135243] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  105.135243] [drm:intel_dump_pipe_config], adjusted mode:
>[  105.135245] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
>[  105.135246] [drm:intel_dump_crtc_timings], crtc timings: 138500 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0xa
>[  105.135247] [drm:intel_dump_pipe_config], port clock: 162000
>[  105.135247] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[  105.135248] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  105.135249] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  105.135250] [drm:intel_dump_pipe_config], ips: 0
>[  105.135251] [drm:intel_dump_pipe_config], double wide: 0
>[  105.143106] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  105.143111] [drm:intel_edp_backlight_off], 
>[  105.159308] [drm:intel_edp_panel_off], Turn eDP power off
>[  105.344212] [drm:wait_panel_off], Wait for panel power off time
>[  105.344217] [drm:wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0000
>[  105.421262] [drm:wait_panel_status], Wait complete
>[  105.421269] [drm:intel_update_fbc], no output, disabling
>[  105.421289] [drm:ironlake_update_plane], Writing base 00585000 00000000 0 0 7680
>[  105.421293] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1080]
>[  105.421294] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  105.421295] [drm:intel_edp_panel_on], Turn eDP power on
>[  105.421297] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[  105.945693] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  105.945695] [drm:wait_panel_status], Wait complete
>[  105.945698] [drm:wait_panel_on], Wait for panel power on
>[  105.945701] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[  106.154854] [drm:wait_panel_status], Wait complete
>[  106.155927] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  106.156388] [drm:intel_dp_start_link_train], clock recovery OK
>[  106.157149] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  106.157400] [drm:intel_edp_backlight_on], 
>[  106.157404] [drm:intel_panel_enable_backlight], pipe A
>[  106.157407] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5100
>[  106.157412] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[  106.174868] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  106.174871] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  106.174873] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  106.174874] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  106.174876] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  106.174877] [drm:check_crtc_state], [CRTC:3]
>[  106.174881] [drm:check_crtc_state], [CRTC:5]
>[  106.174883] [drm:check_crtc_state], [CRTC:7]
>[  106.174886] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[  106.174887] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  106.174889] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  106.174890] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  106.174891] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[  106.174892] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  106.181679] [drm:intel_crtc_cursor_set], cursor off
>[  106.181682] [drm:intel_crtc_set_config], [CRTC:3] [FB:23] #connectors=1 (x y) (0 0)
>[  106.181685] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  106.181687] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  106.181688] [drm:intel_crtc_cursor_set], cursor off
>[  106.181690] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[  106.181691] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  106.181693] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  106.181695] [drm:intel_crtc_cursor_set], cursor off
>[  106.181696] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  106.181697] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[  106.181699] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  119.817945] [drm:i915_runtime_suspend], Suspending device

Actions: View

Attachments on bug 76153: 95770 | 95771

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.