Attachment 96247 Details for Bug 75401 – dmesg output with jani's VDD patches

dmesg output with jani's VDD patches

dmesg_drm.txt (text/plain), 93.07 KB, created by Kresimir Pripuzic on 2014-03-23 17:17:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kresimir Pripuzic

Created: 2014-03-23 17:17:06 UTC

Size: 93.07 KB

patch

obsolete

>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-3.14.0-rc7-custom root=UUID=96385416-73f9-4529-bb47-0d58726559c7 rw quiet resume=/dev/sda4 nmi_watchdog=0 intel_pstate=disable drm.debug=14 log_buf_len=16M
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-3.14.0-rc7-custom root=UUID=96385416-73f9-4529-bb47-0d58726559c7 rw quiet resume=/dev/sda4 nmi_watchdog=0 intel_pstate=disable drm.debug=14 log_buf_len=16M
>[    5.996330] [drm] Initialized drm 1.1.0 20060810
>[    5.999058] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    5.999239] [drm:intel_detect_pch], Found LynxPoint PCH
>[    5.999451] [drm] Memory usable by graphics device = 2048M
>[    5.999452] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    5.999453] [drm:i915_gem_gtt_init], GTT stolen size = 32M
>[    5.999455] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
>[    6.021402] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ce3d018
>[    6.021408] [drm:intel_opregion_setup], Public ACPI methods supported
>[    6.021408] [drm:intel_opregion_setup], SWSCI supported
>[    6.040406] [drm:swsci_setup], SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705)
>[    6.040409] [drm:swsci_setup], SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383
>[    6.040410] [drm:intel_opregion_setup], ASLE supported
>[    6.040477] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    6.040477] [drm] Driver supports precise vblank timestamp query.
>[    6.040479] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz
>[    6.040480] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
>[    6.040482] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    6.040483] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    6.040486] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    6.040488] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    6.040489] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
>[    6.040491] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255
>[    6.040492] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    6.040494] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    6.040495] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    6.040496] [drm:parse_mipi], No MIPI BDB found
>[    6.040498] [drm:parse_ddi_port], Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    6.040499] [drm:parse_ddi_port], VBT HDMI level shift for port B: 6
>[    6.040500] [drm:parse_ddi_port], Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    6.040501] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6
>[    6.040502] [drm:parse_ddi_port], Port D VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    6.040503] [drm:parse_ddi_port], VBT HDMI level shift for port D: 0
>[    6.040509] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    6.040590] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    6.040594] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7da00000
>[    6.040596] [drm:intel_display_power_get], enabling always-on
>[    6.040597] [drm:intel_display_power_get], enabling display
>[    6.040641] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
>[    6.040642] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
>[    6.040643] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
>[    6.040644] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
>[    6.040645] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
>[    6.040646] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
>[    6.040647] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
>[    6.040648] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
>[    6.040649] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
>[    6.040650] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
>[    6.040651] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
>[    6.040652] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
>[    6.040653] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
>[    6.040654] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
>[    6.040655] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
>[    6.040656] [drm:intel_modeset_init], 3 display pipes available.
>[    6.040667] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz
>[    6.041008] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[    6.041012] [drm:intel_dp_init_connector], Adding DP connector on port B
>[    6.041029] [drm:intel_dp_aux_init], registering DPDDC-B bus for card0-DP-1
>[    6.041070] [drm:intel_dp_init_connector], Adding DP connector on port C
>[    6.041085] [drm:intel_dp_aux_init], registering DPDDC-C bus for card0-DP-2
>[    6.041118] [drm:intel_dp_init_connector], Adding eDP connector on port D
>[    6.041145] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    6.041146] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    6.041148] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    6.041149] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    6.041150] [drm:intel_dp_aux_init], registering DPDDC-D bus for card0-eDP-1
>[    6.041174] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[    6.041181] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    6.041462] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 41 00 00 01 c0 02 00 00 00 0f 03 00
>[    6.041632] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel.
>[    6.041647] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x186906
>[    6.061620] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    6.061654] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 4438/4438, sysfs interface registered
>[    6.267114] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    6.267119] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[    6.267121] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[    6.267123] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port D using clock 0x60000000
>[    6.267125] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A
>[    6.267127] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A
>[    6.267128] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A
>[    6.267131] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: enabled, pipe A
>[    6.267133] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:eDP-1] hw state readout: enabled
>[    6.267134] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[    6.267136] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:DP-1] hw state readout: disabled
>[    6.267137] [drm:intel_modeset_readout_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled
>[    6.267139] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:DP-2] hw state readout: disabled
>[    6.267140] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled
>[    6.267142] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    6.267143] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[    6.267144] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
>[    6.267145] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.267147] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5312051, gmch_n: 8388608, link_m: 295113, link_n: 524288, tu: 64
>[    6.267147] [drm:intel_dump_pipe_config], requested mode:
>[    6.267150] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    6.267150] [drm:intel_dump_pipe_config], adjusted mode:
>[    6.267152] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    6.267153] [drm:intel_dump_crtc_timings], crtc timings: 151978 1920 2010 2070 2220 1080 1086 1095 1138, type: 0x0 flags: 0xa
>[    6.267154] [drm:intel_dump_pipe_config], port clock: 270000
>[    6.267155] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[    6.267156] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.267157] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.267158] [drm:intel_dump_pipe_config], ips: 0
>[    6.267158] [drm:intel_dump_pipe_config], double wide: 0
>[    6.267160] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[    6.267161] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    6.267161] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    6.267163] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.267164] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.267164] [drm:intel_dump_pipe_config], requested mode:
>[    6.267166] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    6.267166] [drm:intel_dump_pipe_config], adjusted mode:
>[    6.267168] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    6.267169] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    6.267170] [drm:intel_dump_pipe_config], port clock: 0
>[    6.267170] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    6.267171] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.267172] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.267173] [drm:intel_dump_pipe_config], ips: 0
>[    6.267174] [drm:intel_dump_pipe_config], double wide: 0
>[    6.267175] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[    6.267176] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[    6.267177] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    6.267178] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.267179] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.267179] [drm:intel_dump_pipe_config], requested mode:
>[    6.267181] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    6.267181] [drm:intel_dump_pipe_config], adjusted mode:
>[    6.267183] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    6.267184] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    6.267185] [drm:intel_dump_pipe_config], port clock: 0
>[    6.267185] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    6.267186] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.267187] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.267188] [drm:intel_dump_pipe_config], ips: 0
>[    6.267189] [drm:intel_dump_pipe_config], double wide: 0
>[    6.267193] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[    6.267195] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    6.267196] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    6.267197] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
>[    6.267198] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    6.267200] [drm:check_crtc_state], [CRTC:3]
>[    6.267204] [drm:check_crtc_state], [CRTC:5]
>[    6.267206] [drm:check_crtc_state], [CRTC:7]
>[    6.267210] [drm:ironlake_get_plane_config], pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    6.267211] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    6.267213] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400
>[    6.267216] [drm:intel_alloc_plane_obj], plane fb obj ffff8802703e0180
>[    6.267218] [drm:i915_gem_setup_global_gtt], reserving preallocated space: 0 + 7e9000
>[    6.267219] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [7e9000, 7ffff000]
>[    6.268635] [drm:gen6_ppgtt_init], Allocated pde space (2M) at GTT entry: 800
>[    6.268637] [drm:i915_gem_context_init], HW context support initialized
>[    6.268643] [drm:init_status_page], render ring hws offset: 0x00a00000
>[    6.273794] [drm:init_pipe_control], render ring pipe control offset: 0x00a21000
>[    6.273801] [drm:init_status_page], bsd ring hws offset: 0x00a22000
>[    6.273862] [drm:init_status_page], blitter ring hws offset: 0x00a43000
>[    6.273915] [drm:init_status_page], video enhancement ring hws offset: 0x00a64000
>[    6.274130] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[    6.274132] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[    6.274337] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    6.274513] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    6.274524] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    6.274527] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[    6.274531] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[    6.274533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    6.274534] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[    6.274543] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    6.287103] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    6.287104] [drm:intel_crt_detect], CRT not detected via hotplug
>[    6.287273] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    6.287275] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    6.287276] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.287277] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    6.287782] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    6.287783] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    6.287784] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    6.287786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    6.287787] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[    6.287788] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[    6.287796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[    6.287797] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[    6.287799] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[    6.340489] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.353779] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    6.353783] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[    6.353785] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[    6.353787] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[    6.353789] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[    6.353790] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[    6.353791] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[    6.353948] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.353949] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    6.353950] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[    6.353951] [drm:drm_setup_crtcs], 
>[    6.353953] [drm:drm_enable_connectors], connector 20 enabled? yes
>[    6.353954] [drm:drm_enable_connectors], connector 9 enabled? no
>[    6.353955] [drm:drm_enable_connectors], connector 12 enabled? no
>[    6.353956] [drm:drm_enable_connectors], connector 15 enabled? no
>[    6.353956] [drm:drm_enable_connectors], connector 17 enabled? no
>[    6.353957] [drm:drm_enable_connectors], connector 18 enabled? no
>[    6.353959] [drm:intel_fb_initial_config], looking for cmdline mode on connector 20
>[    6.353960] [drm:intel_fb_initial_config], looking for preferred mode on connector 20
>[    6.353961] [drm:intel_fb_initial_config], connector eDP-1 on crtc 3: 1920x1080
>[    6.353962] [drm:intel_fb_initial_config], connector 9 not enabled, skipping
>[    6.353962] [drm:intel_fb_initial_config], connector 12 not enabled, skipping
>[    6.353963] [drm:intel_fb_initial_config], connector 15 not enabled, skipping
>[    6.353964] [drm:intel_fb_initial_config], connector 17 not enabled, skipping
>[    6.353965] [drm:intel_fb_initial_config], connector 18 not enabled, skipping
>[    6.353966] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
>[    6.353968] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    6.353970] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
>[    6.353973] [drm:i915_pages_create_for_stolen], offset=0x7e9000, size=8294400
>[    6.355534] [drm:intelfb_create], allocated 1920x1080 fb: 0x00a85000, bo ffff8802704ffb00
>[    6.355611] fbcon: inteldrmfb (fb0) is primary device
>[    6.355640] [drm:intel_crtc_cursor_set], cursor off
>[    6.355642] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[    6.355643] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    6.355645] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    6.355646] [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[    6.355647] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
>[    6.355649] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    6.355650] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    6.355652] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains
>[    6.355653] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[    6.355654] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 151600KHz
>[    6.355656] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 18
>[    6.355656] [drm:intel_dp_compute_config], DP link bw required 272880 available 432000
>[    6.355658] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    6.355659] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    6.355659] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[    6.355660] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    6.355661] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.355662] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5298804, gmch_n: 8388608, link_m: 294378, link_n: 524288, tu: 64
>[    6.355662] [drm:intel_dump_pipe_config], requested mode:
>[    6.355664] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[    6.355665] [drm:intel_dump_pipe_config], adjusted mode:
>[    6.355666] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[    6.355668] [drm:intel_dump_crtc_timings], crtc timings: 151600 1920 2010 2070 2220 1080 1086 1095 1138, type: 0x48 flags: 0xa
>[    6.355668] [drm:intel_dump_pipe_config], port clock: 270000
>[    6.355669] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[    6.355670] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.355671] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.355671] [drm:intel_dump_pipe_config], ips: 0
>[    6.355672] [drm:intel_dump_pipe_config], double wide: 0
>[    6.380433] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    6.380442] [drm:intel_edp_backlight_off], 
>[    6.387278] [drm:intel_edp_panel_off], Turn eDP power off
>[    6.583858] [drm:wait_panel_off], Wait for panel power off time
>[    6.583862] [drm:wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0000
>[    6.636144] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[    6.636145] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[    6.637155] [drm:wait_panel_status], Wait complete
>[    6.637159] [drm:intel_update_fbc], no output, disabling
>[    6.637164] [drm:intel_ddi_put_crtc_pll], Disabling SPLL
>[    6.637178] [drm:ironlake_update_primary_plane], Writing base 00A85000 00000000 0 0 7680
>[    6.637185] [drm:intel_edp_psr_match_conditions], HSW ties PSR to DDI A (eDP)
>[    6.637187] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[    6.637188] [drm:intel_ddi_mode_set], Preparing DDI mode on port D, pipe A
>[    6.637189] [drm:intel_edp_panel_on], Turn eDP power on
>[    6.637195] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[    7.187321] [drm:wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0000
>[    7.227300] [drm:wait_panel_status], Wait complete
>[    7.227304] [drm:wait_panel_on], Wait for panel power on
>[    7.227307] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[    7.291732] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[    7.291733] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[    7.330765] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    7.343992] [drm:gen6_enable_rps], Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
>[    7.440696] [drm:wait_panel_status], Wait complete
>[    7.440700] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[    7.440707] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    7.441877] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    7.442340] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    7.442795] [drm:intel_dp_start_link_train], clock recovery OK
>[    7.447347] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    7.447597] [drm:intel_edp_backlight_on], 
>[    7.447605] [drm:intel_panel_enable_backlight], pipe A
>[    7.447608] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4438
>[    7.447613] [drm:intel_edp_psr_match_conditions], HSW ties PSR to DDI A (eDP)
>[    7.467357] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    7.467360] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[    7.467364] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    7.467364] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    7.467365] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
>[    7.467366] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    7.467367] [drm:check_crtc_state], [CRTC:3]
>[    7.467387] [drm:check_crtc_state], [CRTC:5]
>[    7.467388] [drm:check_crtc_state], [CRTC:7]
>[    7.467390] [drm:intel_crtc_cursor_set], cursor off
>[    7.467392] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    7.467393] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    7.467394] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    7.467394] [drm:intel_crtc_cursor_set], cursor off
>[    7.467395] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    7.467395] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    7.467396] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    7.467405] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[    7.467406] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    7.467407] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[    7.471053] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    7.501369] [drm:asle_set_backlight], bclp = 0x80000003
>[    7.501372] [drm:asle_set_backlight], updating opregion backlight 3/255
>[    7.501375] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
>[    7.501378] [drm:asle_set_pwm_freq], PWM freq is not supported
>[    7.501962] [drm:asle_set_backlight], bclp = 0x800000ff
>[    7.501963] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    7.501964] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
>[    7.501966] [drm:asle_set_pwm_freq], PWM freq is not supported
>[    7.502292] [drm:asle_set_backlight], bclp = 0x80000003
>[    7.502294] [drm:asle_set_backlight], updating opregion backlight 3/255
>[    7.502295] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
>[    7.502297] [drm:asle_set_pwm_freq], PWM freq is not supported
>[    7.502560] [drm:asle_set_backlight], bclp = 0x800000ff
>[    7.502562] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    7.502563] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
>[    7.502564] [drm:asle_set_pwm_freq], PWM freq is not supported
>[    7.502789] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    9.047771] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[    9.047785] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   10.792269] [drm:asle_set_backlight], bclp = 0x800000ff
>[   10.792272] [drm:asle_set_backlight], updating opregion backlight 255/255
>[   10.792274] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
>[   10.792277] [drm:asle_set_pwm_freq], PWM freq is not supported
>[   10.796939] [drm:asle_set_backlight], bclp = 0x80000093
>[   10.796943] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=2499/4438
>[   10.796945] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2499
>[   10.796951] [drm:asle_set_backlight], updating opregion backlight 147/255
>[   10.796952] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2499
>[   10.796955] [drm:asle_set_pwm_freq], PWM freq is not supported
>[   20.847912] [drm:i915_gem_open], 
>[   20.847946] [drm:intel_crtc_cursor_set], cursor off
>[   20.847949] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[   20.847951] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   20.847953] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   20.847954] [drm:intel_crtc_cursor_set], cursor off
>[   20.847956] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   20.847957] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   20.847958] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   20.847959] [drm:intel_crtc_cursor_set], cursor off
>[   20.847960] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   20.847961] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   20.847962] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   20.887014] [drm:i915_gem_open], 
>[   20.887030] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[6] ENCODERS[4]
>[   20.887186] [drm:i915_gem_open], 
>[   20.887193] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[6] ENCODERS[4]
>[   20.887196] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[6] ENCODERS[4]
>[   20.887436] [drm:drm_mode_addfb], [FB:28]
>[   20.887555] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[6] ENCODERS[4]
>[   20.887557] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[6] ENCODERS[4]
>[   20.887587] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   20.887590] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   20.887716] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   20.887720] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   20.887730] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   20.887732] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   20.887741] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   20.887743] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   20.887753] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   20.887754] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   20.887765] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   20.887767] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   20.895218] [drm:drm_mode_addfb], [FB:28]
>[   20.895224] [drm:drm_mode_setcrtc], [CRTC:3]
>[   20.895227] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1]
>[   20.895229] [drm:intel_crtc_set_config], [CRTC:3] [FB:28] #connectors=1 (x y) (0 0)
>[   20.895231] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[   20.895232] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   20.899725] [drm:ironlake_update_primary_plane], Writing base 0126E000 00000000 0 0 7680
>[   20.917036] [drm:i915_setup_compression], reserved 16711680 bytes of contiguous stolen space for FBC
>[   20.917038] [drm:intel_edp_psr_match_conditions], HSW ties PSR to DDI A (eDP)
>[   20.917280] [drm:asle_set_backlight], bclp = 0x80000093
>[   20.917283] [drm:asle_set_backlight], updating opregion backlight 147/255
>[   20.917284] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2499
>[   20.917286] [drm:asle_set_pwm_freq], PWM freq is not supported
>[   20.967073] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   27.602364] [drm:i915_gem_open], 
>[   27.606051] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   27.612323] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed
>[   29.782804] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   29.782821] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   29.782836] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   29.795725] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   29.795742] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   29.795913] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   29.795914] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   29.795928] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   29.795935] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   29.795936] [drm:intel_crt_detect], CRT not detected via hotplug
>[   29.796099] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   29.796100] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   29.796101] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   29.796102] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   29.796623] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   29.796624] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   29.796625] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   29.796642] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   29.796649] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   29.796656] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   29.796846] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   29.797015] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   32.806351] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   32.806364] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   36.678052] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   36.678055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   36.678058] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   36.678063] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   36.678070] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   36.678264] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   36.678430] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   36.678439] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   36.678442] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   36.678445] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   36.678448] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   36.678578] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   36.678580] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   36.678582] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   36.678591] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   36.678592] [drm:intel_crt_detect], CRT not detected via hotplug
>[   36.678756] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   36.678758] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   36.678759] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   36.678760] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   36.679278] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   36.679279] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   36.679280] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   36.679282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   36.679285] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   36.679287] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   36.679288] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   36.679291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   36.679293] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   36.679295] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   36.679296] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   36.690569] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   36.690571] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   36.690577] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   36.690579] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   36.690580] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   36.690587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   36.690590] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   36.690591] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   36.690592] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   36.690768] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   36.690769] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   36.690770] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   36.691412] [drm:i915_gem_open], 
>[   36.694438] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   36.700495] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed
>[   36.701996] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   39.687964] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   39.687978] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   44.026064] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   44.026070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   44.026073] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   44.026081] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   44.026088] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   44.026266] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   44.026445] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   44.026456] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   44.026458] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   44.026461] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   44.026465] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   44.026537] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   44.026539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   44.026541] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   44.026548] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   44.026549] [drm:intel_crt_detect], CRT not detected via hotplug
>[   44.026724] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   44.026726] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   44.026727] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   44.026728] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   44.027247] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   44.027248] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   44.027249] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   44.027250] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   44.027254] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   44.027255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   44.027257] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   44.027259] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   44.027260] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   44.027261] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   44.027262] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   44.038887] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   44.038888] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   44.038895] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   44.038896] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   44.038897] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   44.038899] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   44.038902] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   44.038903] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   44.038904] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   44.039080] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   44.039081] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   44.039083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   47.036235] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   47.036249] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   49.653591] [drm:drm_mode_addfb], [FB:29]
>[   49.660037] [drm:ironlake_disable_fbc], disabled FBC
>[   49.716863] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   49.741417] [drm:ironlake_disable_fbc], disabled FBC
>[   49.752825] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.769702] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.786377] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.803041] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.819413] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.836118] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.852901] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.869685] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.886334] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.903016] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.919682] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.936352] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.952992] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.969495] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   49.986024] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.002952] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.019477] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.036148] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.052998] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.069420] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.086346] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.102845] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.119493] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.136218] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.152972] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.169432] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.186379] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.203025] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.219533] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.236490] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.253036] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.269717] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.286347] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.302807] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.319691] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.336357] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.352909] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.369554] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.386209] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.402982] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.419684] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.436366] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.453016] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.469693] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.486366] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.503029] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.519716] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.536353] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.553035] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.569697] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.586370] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.603033] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.619687] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.636378] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.653016] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.669692] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   50.733746] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   50.902129] [drm:ironlake_disable_fbc], disabled FBC
>[   50.967148] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   51.195758] [drm:ironlake_disable_fbc], disabled FBC
>[   51.207207] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.223617] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.239742] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.266882] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.286891] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.304394] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.320194] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.336877] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.353381] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.370204] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.386849] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.403499] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.420193] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.436851] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.453652] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   51.517252] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   54.657618] [drm:ironlake_disable_fbc], disabled FBC
>[   54.674167] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.690506] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.707256] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.724465] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.740293] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.756912] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.773581] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.791021] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.807320] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.820100] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.836871] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.853554] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.870156] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.886920] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.903018] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   54.969158] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   57.465333] [drm:intel_crtc_cursor_set], cursor off
>[   57.492448] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   57.492452] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   57.492455] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   57.492463] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   57.492471] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   57.492648] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   57.492816] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   57.492826] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   57.492829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   57.492831] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   57.492834] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   57.492903] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   57.492905] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   57.492906] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   57.492915] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   57.492916] [drm:intel_crt_detect], CRT not detected via hotplug
>[   57.493078] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   57.493079] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   57.493080] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   57.493082] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   57.493613] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   57.493614] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   57.493615] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   57.493616] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   57.493620] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   57.493621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   57.493622] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   57.493629] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   57.493631] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   57.493632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   57.493633] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   57.505236] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   57.505240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   57.505251] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   57.505253] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   57.505254] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   57.505260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   57.505262] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   57.505263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   57.505264] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   57.505427] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   57.505428] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   57.505430] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   57.506202] [drm:i915_gem_open], 
>[   57.509470] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   57.525729] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed
>[   57.527418] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   58.003855] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   58.003859] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   58.003862] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   58.004043] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   58.004211] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   58.004220] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   58.004223] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   58.004226] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   58.004229] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   58.004296] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   58.004298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   58.004300] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   58.004309] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   58.004310] [drm:intel_crt_detect], CRT not detected via hotplug
>[   58.004474] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   58.004476] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   58.004477] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   58.004478] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   58.004971] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   58.004973] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   58.004974] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   58.004975] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   58.004979] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   58.004980] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   58.004982] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   58.004990] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   58.004991] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   58.004993] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   58.004994] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   58.015361] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   58.015363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   58.015370] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   58.015371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   58.015373] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   58.015380] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   58.015383] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   58.015384] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   58.015385] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   58.015564] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   58.015566] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   58.015567] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   59.107918] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   59.107923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   59.107927] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   59.108116] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   59.108287] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   59.108299] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   59.108302] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   59.108305] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   59.108310] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   59.108387] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   59.108389] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   59.108391] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   59.108400] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   59.108401] [drm:intel_crt_detect], CRT not detected via hotplug
>[   59.108568] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   59.108570] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   59.108571] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   59.108572] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   59.109102] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   59.109104] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   59.109106] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   59.109108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   59.109114] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   59.109116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   59.109118] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   59.109125] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   59.109128] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   59.109129] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   59.109130] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   59.122297] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   59.122303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   59.122323] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   59.122326] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   59.122329] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   59.122334] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   59.122338] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   59.122340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   59.122341] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   59.122512] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   59.122514] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   59.122516] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   59.752092] [drm:ironlake_disable_fbc], disabled FBC
>[   59.808381] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   59.819959] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   59.836599] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   59.902451] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   59.958900] [drm:ironlake_disable_fbc], disabled FBC
>[   60.019154] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   60.275388] [drm:ironlake_disable_fbc], disabled FBC
>[   60.352554] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   60.424273] [drm:ironlake_disable_fbc], disabled FBC
>[   60.440880] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   60.459561] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   60.499229] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   60.499242] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   60.519242] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   66.356051] [drm:ironlake_disable_fbc], disabled FBC
>[   66.388937] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   66.404857] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   66.438139] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   66.471449] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   66.488118] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   66.550663] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   66.622288] [drm:ironlake_disable_fbc], disabled FBC
>[   66.700699] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   68.256529] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   68.256533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   68.256536] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   68.256543] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   68.256550] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   68.256738] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   68.256918] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   68.256929] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   68.256932] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   68.256935] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   68.256939] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   68.257026] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   68.257029] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   68.257031] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   68.257039] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   68.257041] [drm:intel_crt_detect], CRT not detected via hotplug
>[   68.257210] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   68.257212] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   68.257213] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   68.257215] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   68.257743] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   68.257746] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   68.257747] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   68.257749] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   68.257755] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   68.257757] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   68.257759] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   68.257767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   68.257770] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   68.257771] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   68.257773] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   68.271007] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   68.271012] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   68.271026] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   68.271029] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   68.271031] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   68.271039] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   68.271041] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   68.271043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   68.271045] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   68.271219] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   68.271221] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   68.271223] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   68.272195] [drm:i915_gem_open], 
>[   68.275608] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   68.285769] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed
>[   68.288236] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[   68.603278] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   68.603283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1]
>[   68.603287] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   68.603475] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   68.603647] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   68.603658] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   68.603661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes :
>[   68.603664] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   68.603667] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   68.603741] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[   68.603743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[   68.603745] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
>[   68.603753] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[   68.603754] [drm:intel_crt_detect], CRT not detected via hotplug
>[   68.603931] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   68.603933] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   68.603934] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   68.603936] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   68.604444] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   68.604446] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   68.604447] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   68.604449] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[   68.604456] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[   68.604458] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
>[   68.604460] [drm:intel_dp_detect], [CONNECTOR:12:DP-1]
>[   68.604468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
>[   68.604470] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
>[   68.604472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
>[   68.604473] [drm:intel_hdmi_detect], [CONNECTOR:15:HDMI-A-1]
>[   68.617736] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   68.617741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
>[   68.617756] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
>[   68.617759] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
>[   68.617761] [drm:intel_dp_detect], [CONNECTOR:17:DP-2]
>[   68.617769] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
>[   68.617772] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[   68.617774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
>[   68.617776] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2]
>[   68.617947] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   68.617949] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   68.617951] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
>[   69.310887] [drm:ironlake_disable_fbc], disabled FBC
>[   69.327286] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.338352] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.379458] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.410538] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.420960] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.437716] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.454298] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.470995] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.487626] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.504322] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.520901] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.537695] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.554314] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.570925] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   69.634699] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   70.392453] [drm:ironlake_disable_fbc], disabled FBC
>[   70.422818] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   70.438375] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   70.455214] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   70.471894] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   70.492076] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   70.551519] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   71.261637] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   71.261652] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   73.631215] [drm:ironlake_disable_fbc], disabled FBC
>[   73.658648] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   73.718886] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   74.060079] [drm:ironlake_disable_fbc], disabled FBC
>[   74.089907] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   74.152350] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   74.179653] [drm:ironlake_disable_fbc], disabled FBC
>[   74.206552] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   74.269055] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   75.714910] [drm:ironlake_disable_fbc], disabled FBC
>[   75.733372] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.743124] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.755520] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.772018] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.790410] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.808491] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.822236] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.838876] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.855413] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.872077] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.888778] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.905379] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.922295] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.938901] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.955277] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.972373] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   75.988944] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.005453] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.016532] [drm:intel_crtc_cursor_set], cursor off
>[   76.022292] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.086070] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   76.326621] [drm:ironlake_disable_fbc], disabled FBC
>[   76.342038] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.358695] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.375490] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.392093] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.408681] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.425354] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.442012] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.458679] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.475385] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.488742] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.505423] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.522093] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.538756] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.555541] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.572135] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.588834] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.605436] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.622137] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.638877] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   76.679507] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[   76.679512] [drm:intel_edp_backlight_off], 
>[   76.692872] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   76.692885] [drm:_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   76.693064] [drm:intel_edp_panel_off], Turn eDP power off
>[   76.702870] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   76.882935] [drm:wait_panel_off], Wait for panel power off time
>[   76.882945] [drm:wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0000
>[   76.935227] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   76.935231] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[   76.936292] [drm:wait_panel_status], Wait complete
>[   76.936313] [drm:intel_update_fbc], no output, disabling
>[   76.936314] [drm:intel_update_fbc], unsupported config, disabling FBC
>[   76.936316] [drm:ironlake_disable_fbc], disabled FBC
>[   76.936322] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[   76.936323] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[   76.936324] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
>[   76.936325] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[   76.936327] [drm:check_crtc_state], [CRTC:3]
>[   76.936329] [drm:check_crtc_state], [CRTC:5]
>[   76.936330] [drm:check_crtc_state], [CRTC:7]
>[   76.936344] [drm:drm_mode_setcrtc], [CRTC:3]
>[   76.936346] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[   76.936348] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[   76.936349] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [NOCRTC]
>[   76.936350] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[   76.936351] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[   76.936352] [drm:intel_modeset_stage_output_state], crtc disabled, full mode switch
>[   76.936354] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   76.936358] [drm:intel_display_power_put], disabling always-on
>[   76.936361] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[   76.936362] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[   76.936363] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
>[   76.936364] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[   76.936365] [drm:check_crtc_state], [CRTC:3]
>[   76.936366] [drm:check_crtc_state], [CRTC:5]
>[   76.936368] [drm:check_crtc_state], [CRTC:7]
>[   76.936469] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   76.936471] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   76.936474] [drm:intel_display_power_get], enabling always-on
>[   76.936476] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   76.936484] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   76.936486] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   77.486430] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[   77.486439] [drm:wait_panel_status], Wait complete
>[   77.486445] [drm:_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   77.486448] [drm:_edp_panel_vdd_on], eDP was not running
>[   77.550767] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   77.550771] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[   77.690008] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   77.690191] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   77.690196] [drm:intel_display_power_put], disabling always-on
>[   77.690203] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   77.690205] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   77.690208] [drm:intel_display_power_get], enabling always-on
>[   77.690211] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   77.690394] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   77.690575] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   77.690577] [drm:intel_display_power_put], disabling always-on
>[   79.696909] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   79.696934] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[   79.699034] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   79.699037] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[   79.699051] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   79.699053] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   79.699056] [drm:intel_display_power_get], enabling always-on
>[   79.699058] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   79.699061] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   79.699063] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   80.300374] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[   80.300383] [drm:wait_panel_status], Wait complete
>[   80.300389] [drm:_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   80.300392] [drm:_edp_panel_vdd_on], eDP was not running
>[   80.364798] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   80.364802] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[   80.503957] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   80.504134] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   80.504139] [drm:intel_display_power_put], disabling always-on
>[   80.504146] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   80.504150] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   80.504153] [drm:intel_display_power_get], enabling always-on
>[   80.504156] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   80.504343] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   80.504519] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   80.504522] [drm:intel_display_power_put], disabling always-on
>[   83.511103] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   83.511116] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[   83.513271] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   83.513274] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[   83.513295] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   83.513297] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   83.513300] [drm:intel_display_power_get], enabling always-on
>[   83.513302] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   83.513305] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   83.513307] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   84.114578] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[   84.114587] [drm:wait_panel_status], Wait complete
>[   84.114594] [drm:_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   84.114596] [drm:_edp_panel_vdd_on], eDP was not running
>[   84.179004] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   84.179007] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[   84.318090] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   84.318268] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   84.318272] [drm:intel_display_power_put], disabling always-on
>[   84.318278] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   84.318280] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   84.318282] [drm:intel_display_power_get], enabling always-on
>[   84.318284] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   84.318460] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   84.318629] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   84.318630] [drm:intel_display_power_put], disabling always-on
>[   87.325236] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   87.325250] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[   87.327341] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   87.327342] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[   87.327350] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   87.327351] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   87.327354] [drm:intel_display_power_get], enabling always-on
>[   87.327356] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   87.327364] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   87.327366] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   87.928760] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[   87.928769] [drm:wait_panel_status], Wait complete
>[   87.928776] [drm:_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   87.928779] [drm:_edp_panel_vdd_on], eDP was not running
>[   87.993181] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   87.993185] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[   88.132335] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   88.132515] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   88.132519] [drm:intel_display_power_put], disabling always-on
>[   88.132526] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   88.132528] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   88.132530] [drm:intel_display_power_get], enabling always-on
>[   88.132532] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   88.132709] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   88.132879] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   88.132880] [drm:intel_display_power_put], disabling always-on
>[   91.139450] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   91.139464] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[   91.141595] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   91.141597] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[   91.141612] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   91.141614] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   91.141617] [drm:intel_display_power_get], enabling always-on
>[   91.141618] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   91.141626] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   91.141628] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   91.742954] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[   91.742963] [drm:wait_panel_status], Wait complete
>[   91.742970] [drm:_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   91.742972] [drm:_edp_panel_vdd_on], eDP was not running
>[   91.807385] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   91.807388] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[   91.946515] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   91.946693] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   91.946699] [drm:intel_display_power_put], disabling always-on
>[   91.946706] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   91.946709] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   91.946712] [drm:intel_display_power_get], enabling always-on
>[   91.946715] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   91.946899] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   91.947081] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   91.947083] [drm:intel_display_power_put], disabling always-on
>[   94.953668] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   94.953682] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[   94.955837] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   94.955840] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
>[   94.955858] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   94.955859] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   94.955863] [drm:intel_display_power_get], enabling always-on
>[   94.955865] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   94.955868] [drm:_edp_panel_vdd_on], Turning eDP VDD on
>[   94.955870] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   95.557086] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[   95.557095] [drm:wait_panel_status], Wait complete
>[   95.557102] [drm:_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   95.557103] [drm:_edp_panel_vdd_on], eDP was not running
>[   95.621471] [drm:intel_hpd_irq_handler], hotplug event received, stat 0x00800000
>[   95.621473] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 1
>[   95.760725] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   95.760909] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   95.760914] [drm:intel_display_power_put], disabling always-on
>[   95.760922] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   95.760925] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 6) received hotplug event.
>[   95.760928] [drm:intel_display_power_get], enabling always-on
>[   95.760931] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1]
>[   95.761114] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[   95.761290] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[   95.761292] [drm:intel_display_power_put], disabling always-on
>[   96.401038] [drm:drm_mode_setcrtc], [CRTC:3]
>[   96.401044] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1]
>[   96.401046] [drm:intel_crtc_set_config], [CRTC:3] [FB:28] #connectors=1 (x y) (0 0)
>[   96.401048] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[   96.401050] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[   96.401051] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[   96.401052] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3]
>[   96.401053] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[   96.401054] [drm:intel_modeset_stage_output_state], crtc enabled, full mode switch
>[   96.401056] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   96.401058] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains
>[   96.401058] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[   96.401061] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 151600KHz
>[   96.401062] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 18
>[   96.401063] [drm:intel_dp_compute_config], DP link bw required 272880 available 432000
>[   96.401065] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[   96.401066] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[   96.401067] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[   96.401068] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[   96.401069] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   96.401070] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5298804, gmch_n: 8388608, link_m: 294378, link_n: 524288, tu: 64
>[   96.401071] [drm:intel_dump_pipe_config], requested mode:
>[   96.401073] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x0 0xa
>[   96.401073] [drm:intel_dump_pipe_config], adjusted mode:
>[   96.401075] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 151600 1920 2010 2070 2220 1080 1086 1095 1138 0x48 0xa
>[   96.401077] [drm:intel_dump_crtc_timings], crtc timings: 151600 1920 2010 2070 2220 1080 1086 1095 1138, type: 0x48 flags: 0xa
>[   96.401077] [drm:intel_dump_pipe_config], port clock: 270000
>[   96.401078] [drm:intel_dump_pipe_config], pipe src size: 1920x1080
>[   96.401079] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   96.401080] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   96.401081] [drm:intel_dump_pipe_config], ips: 0
>[   96.401082] [drm:intel_dump_pipe_config], double wide: 0
>[   96.401085] [drm:intel_display_power_get], enabling always-on
>[   96.401101] [drm:ironlake_update_primary_plane], Writing base 0126E000 00000000 0 0 7680
>[   96.401104] [drm:intel_edp_psr_match_conditions], HSW ties PSR to DDI A (eDP)
>[   96.401106] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[   96.401108] [drm:intel_ddi_mode_set], Preparing DDI mode on port D, pipe A
>[   96.401109] [drm:intel_edp_panel_on], Turn eDP power on
>[   96.401116] [drm:wait_panel_power_cycle], Wait for panel power cycle
>[   96.401119] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[   96.401121] [drm:wait_panel_status], Wait complete
>[   96.401124] [drm:wait_panel_on], Wait for panel power on
>[   96.401127] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[   96.614045] [drm:wait_panel_status], Wait complete
>[   96.615164] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[   96.615635] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[   96.616091] [drm:intel_dp_start_link_train], clock recovery OK
>[   96.620634] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[   96.620881] [drm:intel_edp_backlight_on], 
>[   96.620891] [drm:intel_panel_enable_backlight], pipe A
>[   96.620894] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2499
>[   96.620900] [drm:intel_edp_psr_match_conditions], HSW ties PSR to DDI A (eDP)
>[   96.640642] [drm:i915_setup_compression], reserved 16711680 bytes of contiguous stolen space for FBC
>[   96.640649] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1]
>[   96.640653] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[   96.640654] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[   96.640656] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
>[   96.640657] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[   96.640659] [drm:check_crtc_state], [CRTC:3]
>[   96.640665] [drm:check_crtc_state], [CRTC:5]
>[   96.640666] [drm:check_crtc_state], [CRTC:7]
>[   96.640936] [drm:asle_set_backlight], bclp = 0x80000093
>[   96.640938] [drm:asle_set_backlight], updating opregion backlight 147/255
>[   96.640939] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2499
>[   96.640941] [drm:asle_set_pwm_freq], PWM freq is not supported
>[   96.682003] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.705514] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.722197] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.738733] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.755603] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.772279] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.788845] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.805775] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.822268] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.839111] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.855361] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.876821] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.889100] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.905719] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.922382] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.938864] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.955498] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   96.972179] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   97.005010] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[   97.070811] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   98.767826] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
>[   98.767840] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  101.960407] [drm:ironlake_disable_fbc], disabled FBC
>[  102.018543] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  102.042664] [drm:ironlake_disable_fbc], disabled FBC
>[  102.101910] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  105.658930] [drm:ironlake_disable_fbc], disabled FBC
>[  105.678713] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.707626] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.724203] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.741546] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.760069] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.774400] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.790893] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.807754] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.828355] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.841794] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.859557] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.874161] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.890718] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  105.952827] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  107.270409] [drm:ironlake_disable_fbc], disabled FBC
>[  107.336471] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  107.471369] [drm:ironlake_disable_fbc], disabled FBC
>[  107.532159] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.563340] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.590552] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.607080] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.623924] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.640665] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.657277] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.673462] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.716336] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.743433] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.762214] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.817943] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.886540] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  107.910499] [drm:ironlake_disable_fbc], disabled FBC
>[  107.928663] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  107.986558] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  108.114332] [drm:ironlake_disable_fbc], disabled FBC
>[  108.141151] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  108.203299] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  109.085654] [drm:intel_crtc_cursor_set], cursor off
>[  119.139603] [drm:ironlake_disable_fbc], disabled FBC
>[  119.205746] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  121.032018] [drm:ironlake_disable_fbc], disabled FBC
>[  121.106245] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  128.525227] [drm:intel_crtc_cursor_set], cursor off
>[  129.394554] [drm:ironlake_disable_fbc], disabled FBC
>[  129.425823] [drm:intel_cancel_fbc_work], cancelling pending FBC enable
>[  129.488061] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  137.741308] [drm:ironlake_disable_fbc], disabled FBC
>[  137.823324] [drm:gen7_enable_fbc], enabled fbc on plane A

Actions: View

Attachments on bug 75401: 94600 | 94691 | 96247 | 105835 | 110495

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.