Attachment 98159 Details for Bug 78063 – dmesg

dmesg

gem_exec_bad_domains_double-write-domain.dmesg (text/plain), 90.29 KB, created by Guo Jinxian on 2014-04-29 06:08:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-04-29 06:08:37 UTC

Size: 90.29 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2102 SMP Mon Apr 28 11:58:53 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_04_28/drm-intel-fixes/7f1950fbb989e8fc5463b307e062b4529d51c862/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_04_28/drm-intel-fixes/7f1950fbb989e8fc5463b307e062b4529d51c862/modules_x86_64/lib/modules/3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ kexec_jump_back_entry=0x3a9aff1b
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009abff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bc855fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bc856000-0x00000000bc85efff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000bc85f000-0x00000000bc8a9fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bc8aa000-0x00000000bc8b1fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bc8b2000-0x00000000bc9a3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bc9a4000-0x00000000bc9a5fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bc9a6000-0x00000000bcbc4fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bcbc5000-0x00000000bcbc5fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bcbc6000-0x00000000bcbd5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bcbd6000-0x00000000bcbf4fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bcbf5000-0x00000000bcc18fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bcc19000-0x00000000bcc5bfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bcc5c000-0x00000000bce7bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bce7c000-0x00000000bcffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bd800000-0x00000000bf9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-E7FFF uncachable
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask E00000000 write-back
>[    0.000000]   1 base 200000000 mask FC0000000 write-back
>[    0.000000]   2 base 0BD800000 mask FFF800000 uncachable
>[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
>[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
>[    0.000000]   5 base 23E600000 mask FFFE00000 uncachable
>[    0.000000]   6 base 23E800000 mask FFF800000 uncachable
>[    0.000000]   7 base 23F000000 mask FFF000000 uncachable
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fda00-0x000fda0f] mapped at [ffff8800000fda00]
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] reserving inaccessible SNB gfx pages
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03239000, 0x03239fff] PGTABLE
>[    0.000000] BRK [0x0323a000, 0x0323afff] PGTABLE
>[    0.000000] BRK [0x0323b000, 0x0323bfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x23e400000-0x23e5fffff]
>[    0.000000]  [mem 0x23e400000-0x23e5fffff] page 2M
>[    0.000000] BRK [0x0323c000, 0x0323cfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23e3fffff]
>[    0.000000]  [mem 0x23c000000-0x23e3fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
>[    0.000000]  [mem 0x200000000-0x23bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
>[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x40200000-0xbc855fff]
>[    0.000000]  [mem 0x40200000-0xbc7fffff] page 2M
>[    0.000000]  [mem 0xbc800000-0xbc855fff] page 4k
>[    0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE
>[    0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xbc8aa000-0xbc8b1fff]
>[    0.000000]  [mem 0xbc8aa000-0xbc8b1fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xbc9a4000-0xbc9a5fff]
>[    0.000000]  [mem 0xbc9a4000-0xbc9a5fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xbcbc5000-0xbcbc5fff]
>[    0.000000]  [mem 0xbcbc5000-0xbcbc5fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xbce7c000-0xbcffffff]
>[    0.000000]  [mem 0xbce7c000-0xbcffffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
>[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
>[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000BC856070 000064 (v01 INTEL  DQ67SW   01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000BC85DB50 0000F4 (v04 INTEL  DQ67SW   01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000BC856168 0079E1 (v02 INTEL  DQ67SW   00000016 INTL 20051117)
>[    0.000000] ACPI: FACS 0x00000000BCBDBF80 000040
>[    0.000000] ACPI: APIC 0x00000000BC85DC48 000072 (v03 INTEL  DQ67SW   01072009 AMI  00010013)
>[    0.000000] ACPI: TCPA 0x00000000BC85DCC0 000032 (v02 INTEL  DQ67SW   00000001 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000BC85DCF8 000102 (v01 INTEL  DQ67SW   00000001 MSFT 03000001)
>[    0.000000] ACPI: MCFG 0x00000000BC85DE00 00003C (v01 INTEL  DQ67SW   01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000BC85DE40 000038 (v01 INTEL  DQ67SW   01072009 AMI. 00000004)
>[    0.000000] ACPI: ASF! 0x00000000BC85DE78 0000A0 (v32 INTEL  DQ67SW   00000001 TFSM 000F4240)
>[    0.000000] ACPI: DMAR 0x00000000BC85DF18 0000E8 (v01 INTEL  DQ67SW   00000001 INTL 00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23e5fffff]
>[    0.000000]   NODE_DATA [mem 0x23e5f5000-0x23e5f8fff]
>[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880235c00000-ffff88023dbfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x23e5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
>[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
>[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
>[    0.000000]   node   0: [mem 0x40200000-0xbc855fff]
>[    0.000000]   node   0: [mem 0xbc8aa000-0xbc8b1fff]
>[    0.000000]   node   0: [mem 0xbc9a4000-0xbc9a5fff]
>[    0.000000]   node   0: [mem 0xbcbc5000-0xbcbc5fff]
>[    0.000000]   node   0: [mem 0xbce7c000-0xbcffffff]
>[    0.000000]   node   0: [mem 0x100000000-0x23e5fffff]
>[    0.000000] On node 0 totalpages: 2075518
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 153 pages reserved
>[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11992 pages used for memmap
>[    0.000000]   DMA32 zone: 767461 pages, LIFO batch:31
>[    0.000000]   Normal zone: 20376 pages used for memmap
>[    0.000000]   Normal zone: 1304064 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc856000-0xbc85efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc85f000-0xbc8a9fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc8b2000-0xbc9a3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc9a6000-0xbcbc4fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcbc6000-0xbcbd5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcbd6000-0xbcbf4fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcbf5000-0xbcc18fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcc19000-0xbcc5bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcc5c000-0xbce7bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbd7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xbf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023e200000 s74752 r8192 d23552 u524288
>[    0.000000] pcpu-alloc: s74752 r8192 d23552 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2042933
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_04_28/drm-intel-fixes/7f1950fbb989e8fc5463b307e062b4529d51c862/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_04_28/drm-intel-fixes/7f1950fbb989e8fc5463b307e062b4529d51c862/modules_x86_64/lib/modules/3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ kexec_jump_back_entry=0x3a9aff1b
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 8068648K/8302072K available (7363K kernel code, 727K rwdata, 3568K rodata, 22732K init, 600K bss, 233424K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:4352 nr_irqs:712 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2494.450 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.90 BogoMIPS (lpj=2494450)
>[    0.000168] pid_max: default: 32768 minimum: 301
>[    0.000263] ACPI: Core revision 20140214
>[    0.004374] ACPI: All ACPI Tables successfully acquired
>[    0.004535] Security Framework initialized
>[    0.005061] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.006782] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.007556] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.007650] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.007972] CPU: Physical Processor ID: 0
>[    0.008054] CPU: Processor Core ID: 0
>[    0.008137] mce: CPU supports 9 MCE banks
>[    0.008228] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.008236] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 6
>[    0.008553] Freeing SMP alternatives memory: 32K (ffffffff83199000 - ffffffff831a1000)
>[    0.009148] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.019245] smpboot: CPU0: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
>[    0.019470] TSC deadline timer enabled
>[    0.019476] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
>[    0.019759] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.019894] ... version:                3
>[    0.019975] ... bit width:              48
>[    0.020057] ... generic registers:      8
>[    0.020139] ... value mask:             0000ffffffffffff
>[    0.020223] ... max period:             0000ffffffffffff
>[    0.020306] ... fixed-purpose events:   3
>[    0.020387] ... event mask:             00000007000000ff
>[    0.020629] x86: Booting SMP configuration:
>[    0.020712] .... node  #0, CPUs:      #1
>[    0.031950] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.034106]  #2
>[    0.045361] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.058663]  #3
>[    0.058663] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.060768] x86: Booted up 1 node, 4 CPUs
>[    0.060929] smpboot: Total of 4 processors activated (19955.60 BogoMIPS)
>[    0.063697] devtmpfs: initialized
>[    0.064073] PM: Registering ACPI NVS region [mem 0xbc85f000-0xbc8a9fff] (307200 bytes)
>[    0.064214] PM: Registering ACPI NVS region [mem 0xbcbd6000-0xbcbf4fff] (126976 bytes)
>[    0.065686] PM: Registering ACPI NVS region [mem 0xbcc19000-0xbcc5bfff] (274432 bytes)
>[    0.065890] xor: automatically using best checksumming function:
>[    0.075697]    avx       : 19036.000 MB/sec
>[    0.075806] RTC time: 15:48:02, date: 04/29/14
>[    0.075929] NET: Registered protocol family 16
>[    0.076187] cpuidle: using governor ladder
>[    0.076268] cpuidle: using governor menu
>[    0.076432] ACPI: bus type PCI registered
>[    0.076569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.076709] PCI: not using MMCONFIG
>[    0.076790] PCI: Using configuration type 1 for base access
>[    0.096755] raid6: sse2x1    6886 MB/s
>[    0.113782] raid6: sse2x2    8332 MB/s
>[    0.130816] raid6: sse2x4    9468 MB/s
>[    0.130897] raid6: using algorithm sse2x4 (9468 MB/s)
>[    0.130980] raid6: using ssse3x2 recovery algorithm
>[    0.131088] ACPI: Added _OSI(Module Device)
>[    0.131170] ACPI: Added _OSI(Processor Device)
>[    0.131252] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.131334] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.133173] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.135714] ACPI: SSDT 0x00000000BCBDAC18 00038C (v01 AMI    IST      00000001 MSFT 03000001)
>[    0.136200] ACPI: Dynamic OEM Table Load:
>[    0.136339] ACPI: SSDT 0x0000000000000000 00038C (v01 AMI    IST      00000001 MSFT 03000001)
>[    0.136549] ACPI: SSDT 0x00000000BCBDBE18 000084 (v01 AMI    CST      00000001 MSFT 03000001)
>[    0.136937] ACPI: Dynamic OEM Table Load:
>[    0.137073] ACPI: SSDT 0x0000000000000000 000084 (v01 AMI    CST      00000001 MSFT 03000001)
>[    0.137723] ACPI: Interpreter enabled
>[    0.137808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
>[    0.138003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
>[    0.138202] ACPI: (supports S0 S3 S4 S5)
>[    0.138284] ACPI: Using IOAPIC for interrupt routing
>[    0.138383] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.138571] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
>[    0.142781] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.143132] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.147919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.148011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.148321] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.148633] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.148796] PCI host bridge to bus 0000:00
>[    0.148879] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.148963] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
>[    0.149051] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
>[    0.149137] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
>[    0.149222] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.149307] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.149394] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.149480] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
>[    0.149573] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>[    0.149656] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    0.149685] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.149719] pci 0000:00:01.0: System wakeup disabled by ACPI
>[    0.149851] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
>[    0.149861] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
>[    0.149867] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.149871] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.149991] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.150025] pci 0000:00:16.0: reg 0x10: [mem 0xfe62a000-0xfe62a00f 64bit]
>[    0.150142] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.150226] pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
>[    0.150253] pci 0000:00:16.2: reg 0x10: [io  0xf130-0xf137]
>[    0.150266] pci 0000:00:16.2: reg 0x14: [io  0xf120-0xf123]
>[    0.150279] pci 0000:00:16.2: reg 0x18: [io  0xf110-0xf117]
>[    0.150292] pci 0000:00:16.2: reg 0x1c: [io  0xf100-0xf103]
>[    0.150305] pci 0000:00:16.2: reg 0x20: [io  0xf0f0-0xf0ff]
>[    0.150453] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
>[    0.150480] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
>[    0.150494] pci 0000:00:16.3: reg 0x14: [mem 0xfe629000-0xfe629fff]
>[    0.150689] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.150720] pci 0000:00:19.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
>[    0.150733] pci 0000:00:19.0: reg 0x14: [mem 0xfe628000-0xfe628fff]
>[    0.150746] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
>[    0.150857] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.150902] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.151035] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.151068] pci 0000:00:1a.0: reg 0x10: [mem 0xfe627000-0xfe6273ff]
>[    0.151204] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.151249] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.151384] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.151409] pci 0000:00:1b.0: reg 0x10: [mem 0xfe620000-0xfe623fff 64bit]
>[    0.151539] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.151623] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.151760] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.151807] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.151944] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
>[    0.152079] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>[    0.152126] pci 0000:00:1c.6: System wakeup disabled by ACPI
>[    0.152261] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.152291] pci 0000:00:1d.0: reg 0x10: [mem 0xfe626000-0xfe6263ff]
>[    0.152429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.152474] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.152602] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.152723] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.152851] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
>[    0.153073] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>[    0.153106] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
>[    0.153120] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
>[    0.153134] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
>[    0.153147] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
>[    0.153160] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.153173] pci 0000:00:1f.2: reg 0x24: [mem 0xfe625000-0xfe6257ff]
>[    0.153260] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.153344] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    0.153370] pci 0000:00:1f.3: reg 0x10: [mem 0xfe624000-0xfe6240ff 64bit]
>[    0.153407] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.153530] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.153698] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.153905] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
>[    0.153938] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
>[    0.154128] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.156101] pci 0000:00:1c.6: PCI bridge to [bus 03]
>[    0.156201] pci 0000:00:1c.6:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    0.156272] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
>[    0.156296] pci 0000:04:03.0: reg 0x10: [mem 0xfe400000-0xfe400fff]
>[    0.156407] pci 0000:04:03.0: supports D1 D2
>[    0.156408] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.156499] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
>[    0.156592] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
>[    0.156601] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
>[    0.156603] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
>[    0.156605] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
>[    0.156606] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.156608] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.156610] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.156612] pci 0000:00:1e.0:   bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
>[    0.157020] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>[    0.157566] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
>[    0.158109] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.158618] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.159131] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled.
>[    0.159669] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.160237] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15), disabled.
>[    0.160775] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>[    0.161328] ACPI: Enabled 3 GPEs in block 00 to 3F
>[    0.161542] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.161679] vgaarb: loaded
>[    0.161759] vgaarb: bridge control possible 0000:00:02.0
>[    0.161914] SCSI subsystem initialized
>[    0.162042] libata version 3.00 loaded.
>[    0.162086] ACPI: bus type USB registered
>[    0.162193] usbcore: registered new interface driver usbfs
>[    0.162287] usbcore: registered new interface driver hub
>[    0.162387] usbcore: registered new device driver usb
>[    0.162491] pps_core: LinuxPPS API ver. 1 registered
>[    0.162575] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.162713] PTP clock support registered
>[    0.162997] PCI: Using ACPI for IRQ routing
>[    0.166256] PCI: pci_cache_line_size set to 64 bytes
>[    0.166321] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
>[    0.166322] e820: reserve RAM buffer [mem 0xbc856000-0xbfffffff]
>[    0.166325] e820: reserve RAM buffer [mem 0xbc8b2000-0xbfffffff]
>[    0.166327] e820: reserve RAM buffer [mem 0xbc9a6000-0xbfffffff]
>[    0.166329] e820: reserve RAM buffer [mem 0xbcbc6000-0xbfffffff]
>[    0.166331] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
>[    0.166332] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
>[    0.166426] NetLabel: Initializing
>[    0.166506] NetLabel:  domain hash size = 128
>[    0.166587] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.166679] NetLabel:  unlabeled traffic allowed by default
>[    0.166860] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.167200] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.169307] Switched to clocksource hpet
>[    0.169432] pnp: PnP ACPI init
>[    0.169523] ACPI: bus type PNP registered
>[    0.169701] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
>[    0.169798] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
>[    0.169890] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.169976] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.170062] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
>[    0.170149] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.170269] system 00:01: [io  0x0290-0x029f] has been reserved
>[    0.170383] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.170552] pnp 00:02: [dma 4]
>[    0.170573] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.170606] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.170629] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.170679] system 00:05: [io  0x04d0-0x04d1] has been reserved
>[    0.170769] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.170796] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.170940] pnp 00:07: [dma 0 disabled]
>[    0.170996] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.171087] pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
>[    0.171241] system 00:09: [io  0x0400-0x0453] could not be reserved
>[    0.171348] system 00:09: [io  0x0458-0x047f] has been reserved
>[    0.171433] system 00:09: [io  0x1180-0x119f] has been reserved
>[    0.171518] system 00:09: [io  0x0500-0x057f] has been reserved
>[    0.171603] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.171689] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
>[    0.171775] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
>[    0.171861] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
>[    0.171947] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.172001] system 00:0a: [io  0x0454-0x0457] has been reserved
>[    0.172091] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.172191] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.172324] pnp: PnP ACPI: found 12 devices
>[    0.172406] ACPI: bus type PNP unregistered
>[    0.178873] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.178960] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.179060] pci 0000:00:1c.6: PCI bridge to [bus 03]
>[    0.179147] pci 0000:00:1c.6:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    0.179243] pci 0000:00:1e.0: PCI bridge to [bus 04]
>[    0.179337] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
>[    0.179434] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
>[    0.179436] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
>[    0.179437] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
>[    0.179439] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
>[    0.179441] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.179443] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
>[    0.179444] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
>[    0.179447] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
>[    0.179448] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
>[    0.179450] pci_bus 0000:04: resource 4 [io  0x0000-0x03af]
>[    0.179452] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7]
>[    0.179453] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df]
>[    0.179455] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff]
>[    0.179457] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.179459] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
>[    0.179460] pci_bus 0000:04: resource 10 [mem 0xbfa00000-0xffffffff]
>[    0.179485] NET: Registered protocol family 2
>[    0.179706] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.179965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.180168] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.180268] TCP: reno registered
>[    0.180384] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.180497] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.180633] NET: Registered protocol family 1
>[    0.180786] RPC: Registered named UNIX socket transport module.
>[    0.180871] RPC: Registered udp transport module.
>[    0.180953] RPC: Registered tcp transport module.
>[    0.181035] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.181414] pci 0000:00:02.0: Boot video device
>[    0.181775] PCI: CLS 64 bytes, default 64
>[    0.574092] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.574182] software IO TLB [mem 0xb8856000-0xbc856000] (64MB) mapped at [ffff8800b8856000-ffff8800bc855fff]
>[    0.575096] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.575206] audit: initializing netlink subsys (disabled)
>[    0.575302] audit: type=2000 audit(1398786482.568:1): initialized
>[    0.600681] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.602479] VFS: Disk quotas dquot_6.5.2
>[    0.602597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.603357] NFS: Registering the id_resolver key type
>[    0.603448] Key type id_resolver registered
>[    0.603530] Key type id_legacy registered
>[    0.603613] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.603848] fuse init (API version 7.23)
>[    0.604025] msgmni has been set to 15759
>[    0.604333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.604472] io scheduler noop registered
>[    0.604554] io scheduler deadline registered
>[    0.604663] io scheduler cfq registered (default)
>[    0.604889] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.605028] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>[    0.605143] pcieport 0000:00:1c.6: irq 42 for MSI/MSI-X
>[    0.605256] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>[    0.605345] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>[    0.605367] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    0.605458] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    0.605480] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
>[    0.605566] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
>[    0.605654] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
>[    0.605661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.606025] Monitor-Mwait will be used to enter C-2 state
>[    0.606029] Monitor-Mwait will be used to enter C-3 state
>[    0.606039] ACPI: acpi_idle registered with cpuidle
>[    0.606981] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.627912] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.650504] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A
>[    0.650848] Non-volatile memory driver v1.3
>[    0.650965] Linux agpgart interface v0.103
>[    0.652458] brd: module loaded
>[    0.652632] Loading iSCSI transport class v2.0-870.
>[    0.652931] iscsi: registered transport (tcp)
>[    0.653199] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.653312] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.653468] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
>[    0.653670] iscsi: registered transport (qla4xxx)
>[    0.653775] QLogic iSCSI HBA Driver
>[    0.653899] DC390: clustering now enabled by default. If you get problems load
>[    0.654061]        with "disable_clustering=1" and report to maintainers
>[    0.654168] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.654310] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.654436] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.654560] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.654671] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.654880] SCSI Media Changer driver v0.25 
>[    0.655031] ahci 0000:00:1f.2: version 3.0
>[    0.655130] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>[    0.665942] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
>[    0.666079] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
>[    0.672490] scsi0 : ahci
>[    0.672713] scsi1 : ahci
>[    0.673115] scsi2 : ahci
>[    0.673296] scsi3 : ahci
>[    0.673501] scsi4 : ahci
>[    0.673726] scsi5 : ahci
>[    0.673857] ata1: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625100 irq 43
>[    0.674027] ata2: DUMMY
>[    0.674105] ata3: DUMMY
>[    0.674185] ata4: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625280 irq 43
>[    0.674320] ata5: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625300 irq 43
>[    0.674454] ata6: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625380 irq 43
>[    0.675723] scsi6 : ata_generic
>[    0.676008] scsi7 : ata_generic
>[    0.676180] ata7: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 18
>[    0.676292] ata8: PATA max UDMA/100 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 18
>[    0.676480] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.676671] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.676954] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.677060] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.677162] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.677268] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.677365] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.677462] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.677685] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.677840] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    0.879043] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    0.879196] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:6a:49:40
>[    0.879330] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.879448] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>[    0.879550] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.879650] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.879767] usbcore: registered new interface driver catc
>[    0.879872] usbcore: registered new interface driver kaweth
>[    0.880000] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.880151] usbcore: registered new interface driver pegasus
>[    0.880257] usbcore: registered new interface driver rtl8150
>[    0.880383] usbcore: registered new interface driver asix
>[    0.880489] usbcore: registered new interface driver ax88179_178a
>[    0.880605] usbcore: registered new interface driver cdc_ether
>[    0.880714] usbcore: registered new interface driver dm9601
>[    0.880823] usbcore: registered new interface driver gl620a
>[    0.880935] usbcore: registered new interface driver net1080
>[    0.881050] usbcore: registered new interface driver plusb
>[    0.881174] usbcore: registered new interface driver rndis_host
>[    0.881284] usbcore: registered new interface driver cdc_subset
>[    0.881394] usbcore: registered new interface driver zaurus
>[    0.881502] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.881665] usbcore: registered new interface driver cdc_ncm
>[    0.881843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.881940] ehci-pci: EHCI PCI platform driver
>[    0.882108] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.882307] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.882473] ehci-pci 0000:00:1a.0: debug port 2
>[    0.886465] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.886478] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe627000
>[    0.892188] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.892313] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.892405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.892538] usb usb1: Product: EHCI Host Controller
>[    0.892621] usb usb1: Manufacturer: Linux 3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ ehci_hcd
>[    0.892755] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.893013] hub 1-0:1.0: USB hub found
>[    0.893111] hub 1-0:1.0: 3 ports detected
>[    0.893398] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.893572] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.893748] ehci-pci 0000:00:1d.0: debug port 2
>[    0.897737] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.897751] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe626000
>[    0.903199] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.903319] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.903415] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.903547] usb usb2: Product: EHCI Host Controller
>[    0.903629] usb usb2: Manufacturer: Linux 3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ ehci_hcd
>[    0.903763] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.904016] hub 2-0:1.0: USB hub found
>[    0.904114] hub 2-0:1.0: 3 ports detected
>[    0.904343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.904445] ohci-pci: OHCI PCI platform driver
>[    0.904557] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.904729] xhci_hcd 0000:03:00.0: xHCI Host Controller
>[    0.904915] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
>[    0.905261] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
>[    0.905264] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
>[    0.905268] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
>[    0.905270] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
>[    0.905273] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
>[    0.905391] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.905477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.905610] usb usb3: Product: xHCI Host Controller
>[    0.905692] usb usb3: Manufacturer: Linux 3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ xhci_hcd
>[    0.905827] usb usb3: SerialNumber: 0000:03:00.0
>[    0.906078] hub 3-0:1.0: USB hub found
>[    0.906212] hub 3-0:1.0: 2 ports detected
>[    0.906381] xhci_hcd 0000:03:00.0: xHCI Host Controller
>[    0.906546] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
>[    0.908667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.908766] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.908899] usb usb4: Product: xHCI Host Controller
>[    0.908981] usb usb4: Manufacturer: Linux 3.15.0-rc2_drm-intel-fixes_7f1950_20140428+ xhci_hcd
>[    0.909115] usb usb4: SerialNumber: 0000:03:00.0
>[    0.909354] hub 4-0:1.0: USB hub found
>[    0.909462] hub 4-0:1.0: 2 ports detected
>[    0.909658] usbcore: registered new interface driver usb-storage
>[    0.909801] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.913183] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.913283] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.913480] mousedev: PS/2 mouse device common for all mice
>[    0.913684] rtc_cmos 00:03: RTC can wake from S4
>[    0.913926] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    0.914059] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.914229] i2c /dev entries driver
>[    0.914352] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.914627] usbcore: registered new interface driver usbhid
>[    0.914776] usbhid: USB HID core driver
>[    0.914951] TCP: cubic registered
>[    0.915039] Initializing XFRM netlink socket
>[    0.915122] NET: Registered protocol family 17
>[    0.915249] Key type dns_resolver registered
>[    0.915667] registered taskstats version 1
>[    0.916151] Btrfs loaded
>[    0.916635]   Magic number: 10:545:842
>[    0.916819] PM: Hibernation image not present or could not be loaded.
>[    0.916832] Warning: unable to open an initial console.
>[    0.979306] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.979415] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.979520] ata6: SATA link down (SStatus 0 SControl 300)
>[    0.980846] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133
>[    0.980943] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.981276] ata5: SATA link down (SStatus 0 SControl 300)
>[    0.981967] ata4.00: ATAPI: ATAPI   iHAS124   B, AL0S, max UDMA/100
>[    0.982872] ata4.00: configured for UDMA/100
>[    0.990780] ata1.00: configured for UDMA/133
>[    0.991053] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5
>[    0.991501] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    0.991512] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    0.991728] sd 0:0:0:0: [sda] Write Protect is off
>[    0.991730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.991801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.992563]  sda: sda1 sda2
>[    0.992981] sd 0:0:0:0: [sda] Attached SCSI disk
>[    0.997542] scsi 3:0:0:0: CD-ROM            ATAPI    iHAS124   B      AL0S PQ: 0 ANSI: 5
>[    1.023292] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.023426] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.023689] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[    1.023783] sr 3:0:0:0: Attached scsi generic sg1 type 5
>[    1.189327] Freeing unused kernel memory: 22732K (ffffffff81b66000 - ffffffff83199000)
>[    1.195541] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.220319] dracut: dracut-018-35.git20120510.fc17
>[    1.244522] udevd[1251]: starting version 182
>[    1.256652] [drm] Initialized drm 1.1.0 20060810
>[    1.257127] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    1.257333] ACPI: Power Button [PWRB]
>[    1.257478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.257674] ACPI: Power Button [PWRF]
>[    1.259684] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc,
>[    1.259828] [drm:intel_detect_pch] Found CougarPoint PCH
>[    1.259988] [drm] Memory usable by graphics device = 2048M
>[    1.260083] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.260084] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.277622] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcbd6018
>[    1.277629] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.277630] [drm:intel_opregion_setup] SWSCI supported
>[    1.283629] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000041)
>[    1.283634] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    1.283636] [drm:intel_opregion_setup] ASLE supported
>[    1.283676] i915 0000:00:02.0: irq 50 for MSI/MSI-X
>[    1.283683] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.283769] [drm] Driver supports precise vblank timestamp query.
>[    1.283854] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.283856] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
>[    1.283859] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.283860] [drm:parse_general_definitions] crt_ddc_bus_pin: 5
>[    1.283863] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.283866] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.283868] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.283870] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.283872] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.283875] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.283876] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.283878] [drm:parse_mipi] No MIPI BDB found
>[    1.283885] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.283890] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bda00000
>[    1.283893] [drm:intel_display_power_get] enabling always-on
>[    1.283923] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    1.283924] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.283926] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.283927] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.283929] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    1.283930] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.283932] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.283933] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.283934] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    1.283936] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.283937] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.283939] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.283941] [drm:intel_modeset_init] 2 display pipes available.
>[    1.283952] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.284393] [drm:intel_lvds_init] LVDS is not present in VBT
>[    1.284436] [drm:intel_crt_reset] pch crt adpa set to 0xf40000
>[    1.284440] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.284947] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    1.284948] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    1.285023] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.285056] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.285083] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.285202] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.285225] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    1.285348] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    1.285386] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-3
>[    1.285459] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[    1.285482] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.285484] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.285491] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    1.285495] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    1.285500] [drm:intel_modeset_readout_hw_state] [ENCODER:11:DAC-11] hw state readout: disabled, pipe A
>[    1.285504] [drm:intel_modeset_readout_hw_state] [ENCODER:12:TMDS-12] hw state readout: disabled, pipe A
>[    1.285507] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A
>[    1.285510] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    1.285517] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: enabled, pipe A
>[    1.285520] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.285523] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[    1.285526] [drm:intel_modeset_readout_hw_state] [CONNECTOR:10:VGA-1] hw state readout: disabled
>[    1.285529] [drm:intel_modeset_readout_hw_state] [CONNECTOR:13:HDMI-A-1] hw state readout: disabled
>[    1.285533] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:DP-1] hw state readout: disabled
>[    1.285537] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-2] hw state readout: disabled
>[    1.285540] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-3] hw state readout: enabled
>[    1.285543] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled
>[    1.285546] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:DP-3] hw state readout: disabled
>[    1.285549] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.285550] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.285551] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.285554] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 586736, gmch_n: 8388608, link_m: 48894, link_n: 524288, tu: 64
>[    1.285556] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.285557] [drm:intel_dump_pipe_config] requested mode:
>[    1.285560] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.285561] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.285563] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.285565] [drm:intel_dump_crtc_timings] crtc timings: 25200 640 656 752 800 480 490 492 525, type: 0x0 flags: 0xa
>[    1.285566] [drm:intel_dump_pipe_config] port clock: 25200
>[    1.285568] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.285570] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.285571] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x028001e0, enabled
>[    1.285572] [drm:intel_dump_pipe_config] ips: 0
>[    1.285574] [drm:intel_dump_pipe_config] double wide: 0
>[    1.285575] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.285576] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.285578] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.285580] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.285593] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.285594] [drm:intel_dump_pipe_config] requested mode:
>[    1.285596] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.285597] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.285599] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.285601] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.285602] [drm:intel_dump_pipe_config] port clock: 0
>[    1.285603] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.285605] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.285606] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.285608] [drm:intel_dump_pipe_config] ips: 0
>[    1.285609] [drm:intel_dump_pipe_config] double wide: 0
>[    1.285618] [drm:intel_connector_check_state] [CONNECTOR:21:HDMI-A-3]
>[    1.285623] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[    1.285626] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[    1.285629] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.285632] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.285635] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    1.285638] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.285641] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.285644] [drm:check_crtc_state] [CRTC:5]
>[    1.285656] [drm:check_crtc_state] [CRTC:8]
>[    1.285658] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.285663] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.285671] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
>[    1.285673] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
>[    1.285675] [drm:i915_pages_create_for_stolen] offset=0x0, size=1282048
>[    1.285679] [drm:intel_alloc_plane_obj] plane fb obj ffff88023023e600
>[    1.285681] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 139000
>[    1.285683] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [139000, 7ffff000]
>[    1.288001] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 150
>[    1.288004] [drm:i915_gem_context_init] HW context support initialized
>[    1.288012] [drm:init_status_page] render ring hws offset: 0x00350000
>[    1.288120] [drm:init_pipe_control] render ring pipe control offset: 0x00371000
>[    1.288126] [drm:init_status_page] bsd ring hws offset: 0x00372000
>[    1.288178] [drm:init_status_page] blitter ring hws offset: 0x00393000
>[    1.288251] [drm] Wrong MCH_SSKPD value: 0x16040307
>[    1.288335] [drm] This can cause pipe underruns and display issues.
>[    1.288419] [drm] Please upgrade your BIOS to fix this.
>[    1.288521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:10:VGA-1]
>[    1.288523] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.288526] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    1.297658] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    1.297662] [drm:intel_crt_detect] CRT not detected via hotplug
>[    1.297894] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.297897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.297899] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.297901] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.298308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.298310] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.298311] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.298314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:10:VGA-1] disconnected
>[    1.298316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:HDMI-A-1]
>[    1.298318] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.298545] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.298557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.298559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.298561] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
>[    1.298563] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.298566] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
>[    1.298568] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2]
>[    1.298569] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.298771] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.298783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.298785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.298787] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-3]
>[    1.298789] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.310038] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.310134] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.310514] hub 1-1:1.0: USB hub found
>[    1.310779] hub 1-1:1.0: 6 ports detected
>[    1.324996] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.325004] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-3] probed modes :
>[    1.325007] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.325009] [drm:drm_mode_debug_printmodeline] Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    1.325011] [drm:drm_mode_debug_printmodeline] Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    1.325014] [drm:drm_mode_debug_printmodeline] Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.325016] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.325018] [drm:drm_mode_debug_printmodeline] Modeline 31:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.325021] [drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.325023] [drm:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.325025] [drm:drm_mode_debug_printmodeline] Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.325027] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.325029] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.325032] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.325034] [drm:drm_mode_debug_printmodeline] Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.325036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2]
>[    1.325037] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.325041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2] disconnected
>[    1.325042] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-3]
>[    1.325044] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.327565] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.331130] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.335128] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.336655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-3] disconnected
>[    1.336656] [drm:drm_setup_crtcs] 
>[    1.336658] [drm:drm_enable_connectors] connector 10 enabled? no
>[    1.336659] [drm:drm_enable_connectors] connector 13 enabled? no
>[    1.336661] [drm:drm_enable_connectors] connector 17 enabled? no
>[    1.336662] [drm:drm_enable_connectors] connector 19 enabled? no
>[    1.336663] [drm:drm_enable_connectors] connector 21 enabled? yes
>[    1.336664] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.336665] [drm:drm_enable_connectors] connector 25 enabled? no
>[    1.336667] [drm:intel_fb_initial_config] connector 10 not enabled, skipping
>[    1.336668] [drm:intel_fb_initial_config] connector 13 not enabled, skipping
>[    1.336670] [drm:intel_fb_initial_config] connector 17 not enabled, skipping
>[    1.336671] [drm:intel_fb_initial_config] connector 19 not enabled, skipping
>[    1.336672] [drm:intel_fb_initial_config] looking for cmdline mode on connector 21
>[    1.336674] [drm:intel_fb_initial_config] looking for preferred mode on connector 21
>[    1.336676] [drm:intel_fb_initial_config] connector HDMI-A-3 on crtc 5: 1920x1200
>[    1.336677] [drm:intel_fb_initial_config] connector 23 not enabled, skipping
>[    1.336678] [drm:intel_fb_initial_config] connector 25 not enabled, skipping
>[    1.336680] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 5
>[    1.336682] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.336683] [drm:i915_gem_object_create_stolen] creating stolen object: size=8ca000
>[    1.336686] [drm:i915_pages_create_for_stolen] offset=0x139000, size=9216000
>[    1.338454] [drm:intelfb_create] allocated 1920x1200 fb: 0x003b4000, bo ffff880230142300
>[    1.338518] fbcon: inteldrmfb (fb0) is primary device
>[    1.339504] [drm:intel_crtc_cursor_set] cursor off
>[    1.339506] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[    1.339508] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.339510] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.339512] [drm:drm_mode_debug_printmodeline] Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.339513] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.339514] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.339517] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.339518] [drm:connected_sink_compute_bpp] [CONNECTOR:21:HDMI-A-3] checking for sink bpp constrains
>[    1.339520] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
>[    1.339520] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
>[    1.339522] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
>[    1.339523] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.339524] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.339524] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.339525] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.339527] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7176920, gmch_n: 8388608, link_m: 299038, link_n: 524288, tu: 64
>[    1.339528] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.339528] [drm:intel_dump_pipe_config] requested mode:
>[    1.339530] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.339531] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.339532] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.339534] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9
>[    1.339534] [drm:intel_dump_pipe_config] port clock: 154000
>[    1.339535] [drm:intel_dump_pipe_config] pipe src size: 1920x1200
>[    1.339536] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.339537] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.339538] [drm:intel_dump_pipe_config] ips: 0
>[    1.339538] [drm:intel_dump_pipe_config] double wide: 0
>[    1.370747] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 5
>[    1.370752] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    1.371165] [drm:intel_update_fbc] no output, disabling
>[    1.371194] [drm:intel_get_shared_dpll] CRTC:5 dropping existing PCH DPLL A
>[    1.371195] [drm:intel_get_shared_dpll] CRTC:5 allocated PCH DPLL A
>[    1.371196] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[    1.371196] [drm:intel_get_shared_dpll] setting up PCH DPLL A
>[    1.371206] [drm:ironlake_update_primary_plane] Writing base 003B4000 00000000 0 0 7680
>[    1.371209] [drm:intel_crtc_mode_set] [ENCODER:20:TMDS-20] set [MODE:0:1920x1200]
>[    1.413807] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.423788] [drm:g4x_wait_for_vblank] vblank wait timed out
>[    1.475848] [drm:g4x_wait_for_vblank] vblank wait timed out
>[    1.476664] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
>[    1.476666] [drm:gen6_fdi_link_train] FDI train 1 done.
>[    1.477323] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[    1.477325] [drm:gen6_fdi_link_train] FDI train 2 done.
>[    1.477325] [drm:gen6_fdi_link_train] FDI train done.
>[    1.477329] [drm:ironlake_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0)for crtc 5
>[    1.477330] [drm:ironlake_enable_shared_dpll] enabling PCH DPLL A
>[    1.478711] [drm:intel_update_fbc] disabled per chip default
>[    1.496883] [drm:intel_connector_check_state] [CONNECTOR:21:HDMI-A-3]
>[    1.496896] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[    1.496898] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[    1.496901] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.496903] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.496905] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    1.496907] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.496909] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.496912] [drm:check_crtc_state] [CRTC:5]
>[    1.496925] [drm:check_crtc_state] [CRTC:8]
>[    1.496926] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.496930] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.496935] [drm:intel_crtc_cursor_set] cursor off
>[    1.496936] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.496938] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.496939] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.496960] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[    1.496962] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.496963] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.503786] Console: switching to colour frame buffer device 240x75
>[    1.503789] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[    1.503790] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.503791] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.510736] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.510768] i915 0000:00:02.0: registered panic notifier
>[    1.510809] i915: No ACPI video bus found
>[    1.510863] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.515429] dracut: Starting plymouth daemon
>[    1.521935] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[    1.521938] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.521940] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.528238] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.528239] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.528493] hub 2-1:1.0: USB hub found
>[    1.528581] hub 2-1:1.0: 8 ports detected
>[    1.531596] [drm:i915_gem_open] 
>[    1.531615] [drm:intel_crtc_cursor_set] cursor off
>[    1.531618] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[    1.531621] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.531624] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.531626] [drm:intel_crtc_cursor_set] cursor off
>[    1.531627] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.531629] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.531631] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.531640] [drm:i915_gem_open] 
>[    1.531648] [drm:intel_crtc_cursor_set] cursor off
>[    1.531650] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[    1.531651] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.531653] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.531655] [drm:intel_crtc_cursor_set] cursor off
>[    1.531656] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.531658] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.531659] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[    1.531666] [drm:i915_gem_open] 
>[    1.531705] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[    1.531707] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[    1.531710] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[    1.531713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:10:VGA-1]
>[    1.531714] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.531719] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    1.531720] [drm:intel_crt_detect] CRT not detected via hotplug
>[    1.531903] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.531906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.531908] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.531911] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.532325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.532326] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.532327] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.532330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:10:VGA-1] disconnected
>[    1.532333] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[    1.532334] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:10:VGA-1]
>[    1.532335] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.532338] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    1.532340] [drm:intel_crt_detect] CRT not detected via hotplug
>[    1.532498] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.532500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.532502] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.532505] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.532917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.532919] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.532920] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.532922] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:10:VGA-1] disconnected
>[    1.532925] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[    1.532927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:HDMI-A-1]
>[    1.532929] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.533087] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.533089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.533092] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.533095] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[    1.533097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:HDMI-A-1]
>[    1.533099] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.533268] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.533270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.533273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.533277] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.533280] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
>[    1.533282] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.533293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
>[    1.533294] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.533296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
>[    1.533297] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.533300] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
>[    1.533302] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.533304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2]
>[    1.533305] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.533463] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.533465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.533468] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.533471] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.533473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2]
>[    1.533475] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.533634] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.533636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.533639] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.533643] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[    1.533645] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-3]
>[    1.533656] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.560021] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.560030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-3] probed modes :
>[    1.560033] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.560035] [drm:drm_mode_debug_printmodeline] Modeline 30:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    1.560038] [drm:drm_mode_debug_printmodeline] Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    1.560040] [drm:drm_mode_debug_printmodeline] Modeline 37:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.560042] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.560044] [drm:drm_mode_debug_printmodeline] Modeline 31:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.560047] [drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.560049] [drm:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.560051] [drm:drm_mode_debug_printmodeline] Modeline 40:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.560053] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.560056] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.560058] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.560060] [drm:drm_mode_debug_printmodeline] Modeline 36:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.560064] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[    1.565292] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.565296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2]
>[    1.565298] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.565302] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2] disconnected
>[    1.565305] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.565306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2]
>[    1.565308] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.565311] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-2] disconnected
>[    1.565314] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.565316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-3]
>[    1.565317] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.567843] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.571393] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.575397] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.576936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-3] disconnected
>[    1.576943] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.576945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-3]
>[    1.576946] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.577948] tsc: Refined TSC clocksource calibration: 2494.332 MHz
>[    1.579427] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.583413] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.587424] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
>[    1.588950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-3] disconnected
>[    1.639320] tpm_tis 00:08: 1.2 TPM (device-id 0xFE, rev-id 70)
>[    1.648564] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[    1.651047] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    1.651657] input: PC Speaker as /devices/platform/pcspkr/input/input5
>[    1.662262] iTCO_vendor_support: vendor-support=0
>[    1.662406] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.662455] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[    1.662655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.673477] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.680442] ppdev: user-space parallel port driver
>[    1.681567] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    1.681610] sound hdaudioC0D2:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
>[    1.681644] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    1.681676] sound hdaudioC0D2:    mono: mono_out=0x0
>[    1.681702] sound hdaudioC0D2:    dig-out=0x1e/0x0
>[    1.681728] sound hdaudioC0D2:    inputs:
>[    1.681750] sound hdaudioC0D2:      Front Mic=0x19
>[    1.681776] sound hdaudioC0D2:      Rear Mic=0x18
>[    1.681801] sound hdaudioC0D2:      Line=0x1a
>[    1.687088] tpm_tis 00:08: TPM is disabled/deactivated (0x7)
>[    1.701341] dracut: Checking ext4: /dev/sda2
>[    1.701490] dracut: issuing e2fsck -a  /dev/sda2
>[    1.707494] dracut: /dev/sda2: clean, 1132949/14524416 files, 22180075/58095360 blocks
>[    1.707909] dracut: Remounting /dev/sda2 with -o ro
>[    1.710154] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
>[    1.712908] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.715986] dracut: Mounted root filesystem /dev/sda2
>[    1.727421] device-mapper: uevent: version 1.0.3
>[    1.727607] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.211862] firewire_core 0000:04:03.0: created device fw0: GUID 00224dffff6cd2aa, S400
>[    2.579340] Switched to clocksource tsc
>[    2.711598] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.715236] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[    4.665585] floppy0: no floppy controllers found
>[    4.678565] dracut: Switching root
>[    4.712187] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    4.715937] systemd[1]: Failed to insert module 'ipv6'
>[    4.717997] systemd[1]: Set hostname to <x-sgb3>.
>[    4.720557] random: systemd urandom read with 75 bits of entropy available
>[    4.733410] LVM: Logical Volume autoactivation enabled.
>[    4.735221] LVM: Activation generator successfully completed.
>[    4.772459] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    4.774349] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    4.776178] systemd[1]: Starting Syslog Socket.
>[    4.778030] systemd[1]: Listening on Syslog Socket.
>[    4.779851] systemd[1]: Starting Replay Read-Ahead Data...
>[    4.782060] systemd[1]: Starting Collect Read-Ahead Data...
>[    4.783290] systemd-readahead[2384]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    4.787520] systemd[1]: Starting Delayed Shutdown Socket.
>[    4.788303] systemd-readahead[2385]: Failed to create fanotify object: Function not implemented
>[    4.792880] systemd[1]: Listening on Delayed Shutdown Socket.
>[    4.792893] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    4.796646] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    4.796677] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    4.802316] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    4.804242] systemd[1]: Starting Journal Socket.
>[    4.806254] systemd[1]: Listening on Journal Socket.
>[    4.806283] systemd[1]: Mounting Huge Pages File System...
>[    4.812267] systemd[1]: Starting Journal Service...
>[    4.817864] systemd[1]: Started Journal Service.
>[    4.818158] systemd[1]: Starting udev Kernel Socket.
>[    4.821763] systemd[1]: Listening on udev Kernel Socket.
>[    4.821821] systemd[1]: Starting udev Control Socket.
>[    4.827493] systemd[1]: Listening on udev Control Socket.
>[    4.827553] systemd[1]: Starting udev Coldplug all Devices...
>[    4.833565] systemd[1]: Mounting Debug File System...
>[    4.837359] systemd[1]: Starting Encrypted Volumes.
>[    4.840958] systemd[1]: Reached target Encrypted Volumes.
>[    4.841018] systemd[1]: Starting Create static device nodes in /dev...
>[    4.847000] systemd[1]: Mounting POSIX Message Queue File System...
>[    4.850810] systemd[1]: Starting LVM2 metadata daemon socket.
>[    4.854377] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    4.856321] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    4.858276] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    4.858290] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    4.864394] systemd[1]: Expecting device dev-disk-by\x2duuid-f3a1cbf6\x2d2bc7\x2d4b66\x2d9fba\x2dd14f1be17919.device...
>[    4.868177] systemd[1]: Mounting Temporary Directory...
>[    4.871222] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    4.874446] systemd[1]: Started Replay Read-Ahead Data.
>[    4.874683] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    4.880685] systemd[1]: Started Collect Read-Ahead Data.
>[    4.884920] systemd[1]: Mounted Huge Pages File System.
>[    4.887046] systemd[1]: Mounted Debug File System.
>[    4.891251] systemd[1]: Started Create static device nodes in /dev.
>[    4.895362] systemd[1]: Mounted POSIX Message Queue File System.
>[    4.897482] systemd[1]: Mounted Temporary Directory.
>[    4.901622] systemd[1]: Started udev Coldplug all Devices.
>[    4.901853] systemd[1]: Starting udev Kernel Device Manager...
>[    4.908228] systemd[1]: Starting Load legacy module configuration...
>[    4.909329] systemd-udevd[3213]: starting version 204
>[    4.914339] systemd[1]: Started File System Check on Root Device.
>[    4.914365] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    4.921330] systemd[1]: Started Load Kernel Modules.
>[    4.921377] systemd[1]: Mounting FUSE Control File System...
>[    4.923172] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    4.928756] systemd[1]: Mounted Configuration File System.
>[    4.929335] systemd[1]: Started Set Up Additional Binary Formats.
>[    4.929360] systemd[1]: Starting Setup Virtual Console...
>[    4.937231] systemd[1]: Starting Apply Kernel Variables...
>[    4.942616] systemd[1]: Started udev Kernel Device Manager.
>[    4.946555] systemd[1]: Mounted FUSE Control File System.
>[    4.946793] systemd[1]: Starting LVM2 metadata daemon...
>[    4.954349] systemd[1]: Started Load legacy module configuration.
>[    4.956314] systemd[1]: Started Remount Root and Kernel File Systems.
>[    4.960191] systemd[1]: Started Apply Kernel Variables.
>[    4.964112] systemd[1]: Started LVM2 metadata daemon.
>[    4.964286] systemd[1]: Starting Local File Systems (Pre).
>[    4.967958] systemd[1]: Reached target Local File Systems (Pre).
>[    4.967973] systemd[1]: Starting Configure read-only root support...
>[    4.968981] systemd-udevd[3236]: renamed network interface em1 to eno1
>[    4.975996] systemd[1]: Started Import network configuration from initramfs.
>[    4.978936] systemd[1]: Starting Sound Card.
>[    4.981851] systemd[1]: Reached target Sound Card.
>[    4.985743] systemd[1]: Started Setup Virtual Console.
>[    4.986028] systemd[1]: Starting Show Plymouth Boot Screen...
>[    5.031779] random: nonblocking pool is initialized
>[    5.060215] audit: type=1305 audit(1398786487.048:2): audit_pid=3272 old=0 auid=4294967295 ses=4294967295 res=1
>[    5.071638] Adding 2047996k swap on /dev/sda1.  Priority:-1 extents:1 across:2047996k SS
>[    5.321711] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    5.422402] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    8.731940] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[   14.323948] [drm:intel_crtc_cursor_set] cursor off
>[   14.323954] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[   14.323958] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   14.323961] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[   14.323963] [drm:intel_crtc_cursor_set] cursor off
>[   14.323965] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   14.323966] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   14.323968] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[   14.328912] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[   14.328915] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   14.328917] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[   14.683833] Ebtables v2.0 registered
>[   14.750815] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   14.849123] NET: Registered protocol family 10
>[   14.870392] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[  173.242652] [drm:i915_gem_open] 
>[  173.242675] [drm:intel_crtc_cursor_set] cursor off
>[  173.242679] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[  173.242683] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  173.242686] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  173.242688] [drm:intel_crtc_cursor_set] cursor off
>[  173.242690] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  173.242692] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  173.242693] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  173.242702] [drm:i915_gem_open] 
>[  173.242995] [drm:i915_gem_open] 
>[  173.243008] [drm:i915_gem_open] 
>[  173.250148] [drm:intel_crtc_cursor_set] cursor off
>[  173.250154] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[  173.250158] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  173.250161] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  173.250163] [drm:intel_crtc_cursor_set] cursor off
>[  173.250165] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  173.250166] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  173.250168] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  205.658397] [drm:i915_gem_open] 
>[  205.658419] [drm:intel_crtc_cursor_set] cursor off
>[  205.658422] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[  205.658427] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  205.658429] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  205.658432] [drm:intel_crtc_cursor_set] cursor off
>[  205.658433] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  205.658435] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  205.658437] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  205.658445] [drm:i915_gem_open] 
>[  205.658769] [drm:i915_gem_open] 
>[  205.658782] [drm:i915_gem_open] 
>[  205.659020] [drm:intel_crtc_cursor_set] cursor off
>[  205.659023] [drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[  205.659025] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  205.659027] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]
>[  205.659029] [drm:intel_crtc_cursor_set] cursor off
>[  205.659030] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  205.659032] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  205.659034] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-3] to [CRTC:5]

Actions: View

Attachments on bug 78063: 98159

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.