Attachment 99014 Details for Bug 78685 – dmesg

dmesg

dmesg_pk2_gem_reset_0514.txt (text/plain), 95.58 KB, created by lu hua on 2014-05-14 07:40:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-05-14 07:40:53 UTC

Size: 95.58 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2606 SMP Wed May 14 11:26:03 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_14/drm-intel-nightly/2be456541ea41728002ccca2de5235f48d14326e/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_14/drm-intel-nightly/2be456541ea41728002ccca2de5235f48d14326e/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_2be456_20140514+
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009f7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7bdffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d7be0000-0x00000000d7be2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000d7be3000-0x00000000d7beffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000d7bf0000-0x00000000d7bfffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.4 present.
>[    0.000000] DMI: Gigabyte Technology Co., Ltd. H55M-UD2H/H55M-UD2H, BIOS F4 12/02/2009
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CBFFF write-protect
>[    0.000000]   CC000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-through
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F00000000 write-back
>[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
>[    0.000000]   2 base 0D8000000 mask FF8000000 uncachable
>[    0.000000]   3 base 100000000 mask FE0000000 write-back
>[    0.000000]   4 base 118000000 mask FF8000000 uncachable
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: update [mem 0xd8000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xd7be0 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f5640-0x000f564f] mapped at [ffff8800000f5640]
>[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x0323c000, 0x0323cfff] PGTABLE
>[    0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE
>[    0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x117e00000-0x117ffffff]
>[    0.000000]  [mem 0x117e00000-0x117ffffff] page 2M
>[    0.000000] BRK [0x0323f000, 0x0323ffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x114000000-0x117dfffff]
>[    0.000000]  [mem 0x114000000-0x117dfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x113ffffff]
>[    0.000000]  [mem 0x100000000-0x113ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xd7bdffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0xd79fffff] page 2M
>[    0.000000]  [mem 0xd7a00000-0xd7bdffff] page 4k
>[    0.000000] ACPI: RSDP 0x00000000000F6FF0 000014 (v00 GBT   )
>[    0.000000] ACPI: RSDT 0x00000000D7BE3040 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: FACP 0x00000000D7BE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: DSDT 0x00000000D7BE3180 0054B5 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
>[    0.000000] ACPI: FACS 0x00000000D7BE0000 000040
>[    0.000000] ACPI: HPET 0x00000000D7BE8780 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>[    0.000000] ACPI: MCFG 0x00000000D7BE8800 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: EUDS 0x00000000D7BE8840 000000 (v01 GBT             00000000      00000000)
>[    0.000000] ACPI: TAMG 0x00000000D7BE8DA0 000A1A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>[    0.000000] ACPI: APIC 0x00000000D7BE8680 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: SSDT 0x00000000D7BE97C0 001CEC (v01 INTEL  PPM RCM  80000001 INTL 20061109)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000117ffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x117ffffff]
>[    0.000000]   NODE_DATA [mem 0x117ff8000-0x117ffbfff]
>[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880113a00000-ffff8801175fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x117ffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xd7bdffff]
>[    0.000000]   node   0: [mem 0x100000000-0x117ffffff]
>[    0.000000] On node 0 totalpages: 981886
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13744 pages used for memmap
>[    0.000000]   DMA32 zone: 879584 pages, LIFO batch:31
>[    0.000000]   Normal zone: 1536 pages used for memmap
>[    0.000000]   Normal zone: 98304 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xdc000000-0xdfffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd7be0000-0xd7be2fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd7be3000-0xd7beffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd7bf0000-0xd7bfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd7c00000-0xdbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
>[    0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff880117c00000 s74752 r8192 d23552 u262144
>[    0.000000] pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 966521
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_14/drm-intel-nightly/2be456541ea41728002ccca2de5235f48d14326e/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_14/drm-intel-nightly/2be456541ea41728002ccca2de5235f48d14326e/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_2be456_20140514+
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3763956K/3927544K available (7365K kernel code, 723K rwdata, 3568K rodata, 22744K init, 600K bss, 163588K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:744 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3199.710 MHz processor
>[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.42 BogoMIPS (lpj=3199710)
>[    0.000188] pid_max: default: 32768 minimum: 301
>[    0.000283] ACPI: Core revision 20140214
>[    0.002979] ACPI: All ACPI Tables successfully acquired
>[    0.003123] Security Framework initialized
>[    0.003379] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.004586] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.005179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.005279] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.005571] CPU: Physical Processor ID: 0
>[    0.005661] CPU: Processor Core ID: 0
>[    0.005753] mce: CPU supports 9 MCE banks
>[    0.005847] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.005855] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 6
>[    0.006182] Freeing SMP alternatives memory: 32K (ffffffff8319c000 - ffffffff831a4000)
>[    0.006768] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.016862] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz (fam: 06, model: 25, stepping: 02)
>[    0.119000] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
>[    0.119233] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
>[    0.119330] ... version:                3
>[    0.119420] ... bit width:              48
>[    0.119509] ... generic registers:      4
>[    0.119598] ... value mask:             0000ffffffffffff
>[    0.119690] ... max period:             000000007fffffff
>[    0.119782] ... fixed-purpose events:   3
>[    0.119871] ... event mask:             000000070000000f
>[    0.120130] x86: Booting SMP configuration:
>[    0.120220] .... node  #0, CPUs:      #1
>[    0.131427] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.133589]  #2
>[    0.144820] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.158113]  #3
>[    0.158113] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.160222] x86: Booted up 1 node, 4 CPUs
>[    0.160400] smpboot: Total of 4 processors activated (25597.68 BogoMIPS)
>[    0.162193] devtmpfs: initialized
>[    0.162497] PM: Registering ACPI NVS region [mem 0xd7be0000-0xd7be2fff] (12288 bytes)
>[    0.162734] xor: measuring software checksum speed
>[    0.171996]    prefetch64-sse: 14016.000 MB/sec
>[    0.181995]    generic_sse: 12272.000 MB/sec
>[    0.182085] xor: using function: prefetch64-sse (14016.000 MB/sec)
>[    0.182199] RTC time: 18:31:04, date: 05/14/14
>[    0.182328] NET: Registered protocol family 16
>[    0.182552] cpuidle: using governor ladder
>[    0.182641] cpuidle: using governor menu
>[    0.182779] ACPI: bus type PCI registered
>[    0.182917] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
>[    0.183085] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
>[    0.184702] PCI: Using configuration type 1 for base access
>[    0.204001] raid6: sse2x1    8207 MB/s
>[    0.220999] raid6: sse2x2    9484 MB/s
>[    0.237993] raid6: sse2x4   10914 MB/s
>[    0.238082] raid6: using algorithm sse2x4 (10914 MB/s)
>[    0.238175] raid6: using ssse3x2 recovery algorithm
>[    0.238300] ACPI: Added _OSI(Module Device)
>[    0.238390] ACPI: Added _OSI(Processor Device)
>[    0.238481] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.238572] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.241351] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x2A, should be 0x29 (20140214/tbprint-218)
>[    0.241961] ACPI: Interpreter enabled
>[    0.242057] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
>[    0.242257] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
>[    0.242462] ACPI: (supports S0 S3 S4 S5)
>[    0.242553] ACPI: Using IOAPIC for interrupt routing
>[    0.242663] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.247782] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.247881] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.248049] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>[    0.248218] PCI host bridge to bus 0000:00
>[    0.248310] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.248405] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.248500] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.248596] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.248692] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.248789] pci_bus 0000:00: root bus resource [mem 0xd7c00000-0xfebfffff]
>[    0.248891] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
>[    0.248962] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
>[    0.248970] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
>[    0.248975] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.248979] pci 0000:00:02.0: reg 0x20: [io  0xff00-0xff07]
>[    0.249068] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
>[    0.249094] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
>[    0.249182] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.249249] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
>[    0.249282] pci 0000:00:1a.0: reg 0x20: [io  0xfe00-0xfe1f]
>[    0.249339] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.249464] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
>[    0.249498] pci 0000:00:1a.1: reg 0x20: [io  0xfd00-0xfd1f]
>[    0.249556] pci 0000:00:1a.1: System wakeup disabled by ACPI
>[    0.249680] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
>[    0.249713] pci 0000:00:1a.2: reg 0x20: [io  0xfc00-0xfc1f]
>[    0.249769] pci 0000:00:1a.2: System wakeup disabled by ACPI
>[    0.249899] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
>[    0.249916] pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
>[    0.249988] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.250025] pci 0000:00:1a.7: System wakeup disabled by ACPI
>[    0.250154] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
>[    0.250166] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
>[    0.250222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.250254] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.250378] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
>[    0.250431] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.250464] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.250590] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
>[    0.250643] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.250676] pci 0000:00:1c.4: System wakeup disabled by ACPI
>[    0.250799] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
>[    0.250852] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.250887] pci 0000:00:1c.5: System wakeup disabled by ACPI
>[    0.251015] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
>[    0.251048] pci 0000:00:1d.0: reg 0x20: [io  0xfb00-0xfb1f]
>[    0.251105] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.251230] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
>[    0.251263] pci 0000:00:1d.1: reg 0x20: [io  0xfa00-0xfa1f]
>[    0.251319] pci 0000:00:1d.1: System wakeup disabled by ACPI
>[    0.251443] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
>[    0.251476] pci 0000:00:1d.2: reg 0x20: [io  0xf900-0xf91f]
>[    0.251533] pci 0000:00:1d.2: System wakeup disabled by ACPI
>[    0.251663] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
>[    0.251680] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
>[    0.251751] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.251785] pci 0000:00:1d.7: System wakeup disabled by ACPI
>[    0.251908] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.251971] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.252099] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
>[    0.252239] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
>[    0.252251] pci 0000:00:1f.2: reg 0x10: [io  0xf800-0xf807]
>[    0.252257] pci 0000:00:1f.2: reg 0x14: [io  0xf700-0xf703]
>[    0.252263] pci 0000:00:1f.2: reg 0x18: [io  0xf600-0xf607]
>[    0.252268] pci 0000:00:1f.2: reg 0x1c: [io  0xf500-0xf503]
>[    0.252274] pci 0000:00:1f.2: reg 0x20: [io  0xf400-0xf40f]
>[    0.252280] pci 0000:00:1f.2: reg 0x24: [io  0xf300-0xf30f]
>[    0.252355] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
>[    0.252367] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
>[    0.252383] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
>[    0.252449] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
>[    0.252461] pci 0000:00:1f.5: reg 0x10: [io  0xf100-0xf107]
>[    0.252467] pci 0000:00:1f.5: reg 0x14: [io  0xf000-0xf003]
>[    0.252473] pci 0000:00:1f.5: reg 0x18: [io  0xef00-0xef07]
>[    0.252478] pci 0000:00:1f.5: reg 0x1c: [io  0xee00-0xee03]
>[    0.252484] pci 0000:00:1f.5: reg 0x20: [io  0xed00-0xed0f]
>[    0.252490] pci 0000:00:1f.5: reg 0x24: [io  0xec00-0xec0f]
>[    0.252599] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.252694] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.252697] pci 0000:00:1c.0:   bridge window [mem 0xd7c00000-0xd7dfffff]
>[    0.252701] pci 0000:00:1c.0:   bridge window [mem 0xd7e00000-0xd7ffffff 64bit pref]
>[    0.252754] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185
>[    0.252781] pci 0000:02:00.0: reg 0x10: [io  0xdf00-0xdf07]
>[    0.252793] pci 0000:02:00.0: reg 0x14: [io  0xde00-0xde03]
>[    0.252805] pci 0000:02:00.0: reg 0x18: [io  0xdd00-0xdd07]
>[    0.252817] pci 0000:02:00.0: reg 0x1c: [io  0xdc00-0xdc03]
>[    0.252829] pci 0000:02:00.0: reg 0x20: [io  0xdb00-0xdb0f]
>[    0.252937] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.253114] pci 0000:00:1c.4: PCI bridge to [bus 02]
>[    0.253208] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
>[    0.253211] pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
>[    0.253215] pci 0000:00:1c.4:   bridge window [mem 0xd8000000-0xd81fffff 64bit pref]
>[    0.253270] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
>[    0.253285] pci 0000:03:00.0: reg 0x10: [io  0xce00-0xceff]
>[    0.253309] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
>[    0.253324] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
>[    0.253334] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[    0.253403] pci 0000:03:00.0: supports D1 D2
>[    0.253404] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.255018] pci 0000:00:1c.5: PCI bridge to [bus 03]
>[    0.255120] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
>[    0.255123] pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
>[    0.255127] pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
>[    0.255168] pci 0000:04:07.0: [104c:8024] type 00 class 0x0c0010
>[    0.255182] pci 0000:04:07.0: reg 0x10: [mem 0xfbcff000-0xfbcff7ff]
>[    0.255191] pci 0000:04:07.0: reg 0x14: [mem 0xfbcf8000-0xfbcfbfff]
>[    0.255247] pci 0000:04:07.0: supports D1 D2
>[    0.255249] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot
>[    0.255304] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
>[    0.255403] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
>[    0.255407] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.255409] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.255411] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.255412] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.255414] pci 0000:00:1e.0:   bridge window [mem 0xd7c00000-0xfebfffff] (subtractive decode)
>[    0.255632] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15), disabled.
>[    0.256067] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15), disabled.
>[    0.256499] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15), disabled.
>[    0.256929] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15), disabled.
>[    0.257362] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[    0.257808] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15), disabled.
>[    0.258241] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15), disabled.
>[    0.258670] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15), disabled.
>[    0.259108] ACPI: Enabled 1 GPEs in block 00 to 3F
>[    0.259296] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.259459] vgaarb: loaded
>[    0.259546] vgaarb: bridge control possible 0000:00:02.0
>[    0.259698] SCSI subsystem initialized
>[    0.259824] libata version 3.00 loaded.
>[    0.259851] ACPI: bus type USB registered
>[    0.259965] usbcore: registered new interface driver usbfs
>[    0.260070] usbcore: registered new interface driver hub
>[    0.260181] usbcore: registered new device driver usb
>[    0.260291] pps_core: LinuxPPS API ver. 1 registered
>[    0.260382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.260549] PTP clock support registered
>[    0.260683] PCI: Using ACPI for IRQ routing
>[    0.261868] PCI: Discovered peer bus 3f
>[    0.261958] PCI: root bus 3f: using default resources
>[    0.261959] PCI: Probing PCI hardware (bus 3f)
>[    0.261981] PCI host bridge to bus 0000:3f
>[    0.262074] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
>[    0.262169] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
>[    0.262266] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
>[    0.262430] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
>[    0.262434] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
>[    0.262469] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
>[    0.262503] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
>[    0.262534] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
>[    0.262565] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
>[    0.262597] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
>[    0.262635] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
>[    0.262637] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
>[    0.262639] PCI: pci_cache_line_size set to 64 bytes
>[    0.262686] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>[    0.262687] e820: reserve RAM buffer [mem 0xd7be0000-0xd7ffffff]
>[    0.262775] NetLabel: Initializing
>[    0.262863] NetLabel:  domain hash size = 128
>[    0.262953] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.263056] NetLabel:  unlabeled traffic allowed by default
>[    0.263215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.263461] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.265574] Switched to clocksource hpet
>[    0.265706] pnp: PnP ACPI init
>[    0.265801] ACPI: bus type PNP registered
>[    0.266008] system 00:00: [io  0x04d0-0x04d1] has been reserved
>[    0.266104] system 00:00: [io  0x0290-0x029f] has been reserved
>[    0.266199] system 00:00: [io  0x0800-0x087f] has been reserved
>[    0.266295] system 00:00: [io  0x0290-0x0294] has been reserved
>[    0.266389] system 00:00: [io  0x0880-0x088f] has been reserved
>[    0.266485] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.266494] pnp 00:01: [dma 4]
>[    0.266511] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.266566] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.266613] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.266633] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.266658] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.266737] pnp 00:06: [dma 2]
>[    0.266764] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
>[    0.266913] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.266976] system 00:08: [io  0x0400-0x04cf] could not be reserved
>[    0.267072] system 00:08: [io  0x04d2-0x04ff] has been reserved
>[    0.267167] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.267305] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved
>[    0.267403] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.267529] system 00:0a: [mem 0x000ccc00-0x000cffff] has been reserved
>[    0.267637] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
>[    0.267734] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
>[    0.267831] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
>[    0.267929] system 00:0a: [mem 0xd7be0000-0xd7bfffff] could not be reserved
>[    0.268026] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.268124] system 00:0a: [mem 0x00100000-0xd7bdffff] could not be reserved
>[    0.268221] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.268318] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
>[    0.268414] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
>[    0.268511] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.268616] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
>[    0.268715] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.268811] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
>[    0.268908] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.268943] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.268946] pnp: PnP ACPI: found 12 devices
>[    0.269038] ACPI: bus type PNP unregistered
>[    0.275265] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.275360] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.275457] pci 0000:00:1c.0:   bridge window [mem 0xd7c00000-0xd7dfffff]
>[    0.275555] pci 0000:00:1c.0:   bridge window [mem 0xd7e00000-0xd7ffffff 64bit pref]
>[    0.275723] pci 0000:00:1c.4: PCI bridge to [bus 02]
>[    0.275816] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
>[    0.275913] pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
>[    0.276011] pci 0000:00:1c.4:   bridge window [mem 0xd8000000-0xd81fffff 64bit pref]
>[    0.276178] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
>[    0.276339] pci 0000:00:1c.5: PCI bridge to [bus 03]
>[    0.276432] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
>[    0.276529] pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
>[    0.276635] pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
>[    0.276798] pci 0000:00:1e.0: PCI bridge to [bus 04]
>[    0.276893] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
>[    0.276993] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.276995] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.276997] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.276998] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>[    0.277000] pci_bus 0000:00: resource 8 [mem 0xd7c00000-0xfebfffff]
>[    0.277002] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.277003] pci_bus 0000:01: resource 1 [mem 0xd7c00000-0xd7dfffff]
>[    0.277005] pci_bus 0000:01: resource 2 [mem 0xd7e00000-0xd7ffffff 64bit pref]
>[    0.277007] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.277008] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
>[    0.277010] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd81fffff 64bit pref]
>[    0.277011] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>[    0.277013] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
>[    0.277014] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
>[    0.277016] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
>[    0.277017] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>[    0.277019] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>[    0.277020] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.277022] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
>[    0.277023] pci_bus 0000:04: resource 8 [mem 0xd7c00000-0xfebfffff]
>[    0.277025] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
>[    0.277027] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
>[    0.277050] NET: Registered protocol family 2
>[    0.277273] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.277522] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.277746] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.277862] TCP: reno registered
>[    0.277956] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.278073] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.278226] NET: Registered protocol family 1
>[    0.278372] RPC: Registered named UNIX socket transport module.
>[    0.278467] RPC: Registered udp transport module.
>[    0.278558] RPC: Registered tcp transport module.
>[    0.278654] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.278755] pci 0000:00:02.0: Boot video device
>[    0.279863] PCI: CLS 64 bytes, default 64
>[    0.598354] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.598455] software IO TLB [mem 0xd3be0000-0xd7be0000] (64MB) mapped at [ffff8800d3be0000-ffff8800d7bdffff]
>[    0.599303] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.599435] audit: initializing netlink subsys (disabled)
>[    0.599539] audit: type=2000 audit(1400092263.484:1): initialized
>[    0.617801] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.619235] VFS: Disk quotas dquot_6.5.2
>[    0.619356] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.620010] NFS: Registering the id_resolver key type
>[    0.620110] Key type id_resolver registered
>[    0.620200] Key type id_legacy registered
>[    0.620291] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.620498] fuse init (API version 7.23)
>[    0.620661] msgmni has been set to 7351
>[    0.620921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.621082] io scheduler noop registered
>[    0.621172] io scheduler deadline registered
>[    0.621286] io scheduler cfq registered (default)
>[    0.621792] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.622042] Monitor-Mwait will be used to enter C-1 state
>[    0.622045] Monitor-Mwait will be used to enter C-2 state
>[    0.622047] Monitor-Mwait will be used to enter C-3 state
>[    0.622055] ACPI: acpi_idle registered with cpuidle
>[    0.622689] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.643327] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.643830] Non-volatile memory driver v1.3
>[    0.643924] Linux agpgart interface v0.103
>[    0.644077] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
>[    0.644198] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>[    0.644928] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>[    0.645191] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>[    0.646471] brd: module loaded
>[    0.646662] Loading iSCSI transport class v2.0-870.
>[    0.646889] iscsi: registered transport (tcp)
>[    0.647084] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.647195] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.647358] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
>[    0.647552] iscsi: registered transport (qla4xxx)
>[    0.647661] QLogic iSCSI HBA Driver
>[    0.647777] DC390: clustering now enabled by default. If you get problems load
>[    0.647942]        with "disable_clustering=1" and report to maintainers
>[    0.648060] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.648191] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.648296] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.648423] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.650477] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.650706] SCSI Media Changer driver v0.25 
>[    0.650900] ata_piix 0000:00:1f.2: version 2.13
>[    0.651016] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>[    0.651610] scsi0 : ata_piix
>[    0.651779] scsi1 : ata_piix
>[    0.651913] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
>[    0.652016] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
>[    0.652208] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>[    0.652684] scsi2 : ata_piix
>[    0.652840] scsi3 : ata_piix
>[    0.652963] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
>[    0.653062] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
>[    0.653980] scsi4 : pata_jmicron
>[    0.654136] scsi5 : pata_jmicron
>[    0.654258] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
>[    0.654356] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
>[    0.654890] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.655075] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.655306] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.655405] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.655510] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.655621] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.655730] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.655825] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.655933] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.656031] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.656145] usbcore: registered new interface driver catc
>[    0.656247] usbcore: registered new interface driver kaweth
>[    0.656342] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.656509] usbcore: registered new interface driver pegasus
>[    0.656621] usbcore: registered new interface driver rtl8150
>[    0.656726] usbcore: registered new interface driver asix
>[    0.656827] usbcore: registered new interface driver ax88179_178a
>[    0.656928] usbcore: registered new interface driver cdc_ether
>[    0.657029] usbcore: registered new interface driver dm9601
>[    0.657129] usbcore: registered new interface driver gl620a
>[    0.657230] usbcore: registered new interface driver net1080
>[    0.657331] usbcore: registered new interface driver plusb
>[    0.657432] usbcore: registered new interface driver rndis_host
>[    0.657533] usbcore: registered new interface driver cdc_subset
>[    0.657647] usbcore: registered new interface driver zaurus
>[    0.657748] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.657922] usbcore: registered new interface driver cdc_ncm
>[    0.658080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.658178] ehci-pci: EHCI PCI platform driver
>[    0.658367] ehci-pci 0000:00:1a.7: EHCI Host Controller
>[    0.658491] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    0.658668] ehci-pci 0000:00:1a.7: debug port 2
>[    0.662670] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
>[    0.662690] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
>[    0.668642] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    0.668789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.668901] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.669061] usb usb1: Product: EHCI Host Controller
>[    0.669153] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ ehci_hcd
>[    0.669315] usb usb1: SerialNumber: 0000:00:1a.7
>[    0.669549] hub 1-0:1.0: USB hub found
>[    0.669656] hub 1-0:1.0: 6 ports detected
>[    0.669914] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    0.670123] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    0.670308] ehci-pci 0000:00:1d.7: debug port 2
>[    0.674291] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    0.674302] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
>[    0.679623] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.679777] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.679877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.680037] usb usb2: Product: EHCI Host Controller
>[    0.680129] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ ehci_hcd
>[    0.680293] usb usb2: SerialNumber: 0000:00:1d.7
>[    0.680657] hub 2-0:1.0: USB hub found
>[    0.680759] hub 2-0:1.0: 6 ports detected
>[    0.680952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.681056] ohci-pci: OHCI PCI platform driver
>[    0.681160] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.681345] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    0.681471] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    0.681659] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
>[    0.681779] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.681875] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.682036] usb usb3: Product: UHCI Host Controller
>[    0.682128] usb usb3: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ uhci_hcd
>[    0.682292] usb usb3: SerialNumber: 0000:00:1a.0
>[    0.682468] hub 3-0:1.0: USB hub found
>[    0.682564] hub 3-0:1.0: 2 ports detected
>[    0.682788] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    0.682915] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    0.683103] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
>[    0.683222] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.683318] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.683478] usb usb4: Product: UHCI Host Controller
>[    0.683573] usb usb4: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ uhci_hcd
>[    0.683733] usb usb4: SerialNumber: 0000:00:1a.1
>[    0.684149] hub 4-0:1.0: USB hub found
>[    0.684240] hub 4-0:1.0: 2 ports detected
>[    0.684460] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    0.684622] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    0.684799] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00
>[    0.684919] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.685015] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.685166] usb usb5: Product: UHCI Host Controller
>[    0.685251] usb usb5: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ uhci_hcd
>[    0.685414] usb usb5: SerialNumber: 0000:00:1a.2
>[    0.685765] hub 5-0:1.0: USB hub found
>[    0.685860] hub 5-0:1.0: 2 ports detected
>[    0.686065] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.686346] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    0.686528] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
>[    0.686663] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.686752] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.686894] usb usb6: Product: UHCI Host Controller
>[    0.686983] usb usb6: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ uhci_hcd
>[    0.687141] usb usb6: SerialNumber: 0000:00:1d.0
>[    0.687348] hub 6-0:1.0: USB hub found
>[    0.687447] hub 6-0:1.0: 2 ports detected
>[    0.687669] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.687954] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    0.688152] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
>[    0.688261] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.688358] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.688517] usb usb7: Product: UHCI Host Controller
>[    0.688609] usb usb7: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ uhci_hcd
>[    0.688754] usb usb7: SerialNumber: 0000:00:1d.1
>[    0.688962] hub 7-0:1.0: USB hub found
>[    0.689061] hub 7-0:1.0: 2 ports detected
>[    0.689269] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.689522] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    0.689698] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
>[    0.689806] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.689890] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.690046] usb usb8: Product: UHCI Host Controller
>[    0.690135] usb usb8: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ uhci_hcd
>[    0.690277] usb usb8: SerialNumber: 0000:00:1d.2
>[    0.690494] hub 8-0:1.0: USB hub found
>[    0.690591] hub 8-0:1.0: 2 ports detected
>[    0.690780] usbcore: registered new interface driver usb-storage
>[    0.690903] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.719722] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.719873] mousedev: PS/2 mouse device common for all mice
>[    0.720047] rtc_cmos 00:03: RTC can wake from S4
>[    0.720242] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    0.720360] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
>[    0.720528] i2c /dev entries driver
>[    0.720640] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.720893] usbcore: registered new interface driver usbhid
>[    0.721002] usbhid: USB HID core driver
>[    0.721148] TCP: cubic registered
>[    0.721224] Initializing XFRM netlink socket
>[    0.721312] NET: Registered protocol family 17
>[    0.721420] Key type dns_resolver registered
>[    0.721787] registered taskstats version 1
>[    0.722194] Btrfs loaded
>[    0.722580]   Magic number: 14:432:544
>[    0.724495] PM: Hibernation image not present or could not be loaded.
>[    0.724506] Warning: unable to open an initial console.
>[    0.968343] ata4: SATA link down (SStatus 0 SControl 300)
>[    0.971716] usb 1-6: new high-speed USB device number 2 using ehci-pci
>[    1.093631] usb 1-6: New USB device found, idVendor=0b95, idProduct=1790
>[    1.093728] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.093819] usb 1-6: Product: AX88179
>[    1.093896] usb 1-6: Manufacturer: ASIX Elec. Corp.
>[    1.093976] usb 1-6: SerialNumber: 00000000000003
>[    1.108627] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.112197] ata3.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133
>[    1.112294] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    1.134178] ata3.00: configured for UDMA/133
>[    1.281306] ata2.00: SATA link down (SStatus 0 SControl 300)
>[    1.281411] ata2.01: SATA link down (SStatus 0 SControl 300)
>[    1.292191] ata1.00: SATA link down (SStatus 0 SControl 300)
>[    1.292292] ata1.01: SATA link down (SStatus 0 SControl 300)
>[    1.292865] scsi 2:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5
>[    1.293542] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.293568] sd 2:0:0:0: Attached scsi generic sg0 type 0
>[    1.293917] sd 2:0:0:0: [sda] Write Protect is off
>[    1.294014] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.294093] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.295169]  sda: sda1 sda2
>[    1.295480] sd 2:0:0:0: [sda] Attached SCSI disk
>[    1.415155] ax88179_178a 1-6:1.0 eth0: register 'ax88179_178a' at usb-0000:00:1a.7-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:23:54:5c:57:10
>[    1.449072] Freeing unused kernel memory: 22744K (ffffffff81b66000 - ffffffff8319c000)
>[    1.474473] dracut: dracut-018-35.git20120510.fc17
>[    1.495285] udevd[1243]: starting version 182
>[    1.505852] [drm] Initialized drm 1.1.0 20060810
>[    1.506370] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    1.506598] ACPI: Power Button [PWRB]
>[    1.506765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    1.506957] ACPI: Power Button [PWRF]
>[    1.509867] [drm:i915_dump_device_info] i915 device info: gen=5, pciid=0x0042 flags=need_gfx_hws,has_hotplug,
>[    1.509948] [drm:intel_detect_pch] Found Ibex Peak PCH
>[    1.509952] [drm] Memory usable by graphics device = 2048M
>[    1.510052] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.510054] [drm:i915_gem_gtt_init] GTT stolen size = 64M
>[    1.510056] [drm:i915_gem_gtt_init] ppgtt mode: 0
>[    1.517590] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.518062] [drm:intel_opregion_setup] graphic opregion physical addr: 0xd7be0800
>[    1.518068] [drm:intel_opregion_setup] SWSCI supported
>[    1.523642] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000001)
>[    1.523649] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
>[    1.523710] i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[    1.523723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.523815] [drm] Driver supports precise vblank timestamp query.
>[    1.523897] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.523899] [drm:validate_vbt] Using VBT from OpRegion: $VBT IRONLAKE-DESK  d
>[    1.523901] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.523902] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.523906] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.523908] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.523910] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.523911] [drm:parse_driver_features] DRRS State Enabled:0
>[    1.523912] [drm:parse_mipi] No MIPI config BDB found
>[    1.523919] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.523925] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at dc000000
>[    1.523927] [drm:intel_display_power_get] enabling always-on
>[    1.523959] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    1.523960] [drm:intel_print_wm_latency] Primary WM1 latency 19 (9.5 usec)
>[    1.523961] [drm:intel_print_wm_latency] Primary WM2 latency 43 (21.5 usec)
>[    1.523962] [drm:intel_print_wm_latency] Sprite WM0 latency 13 (1.3 usec)
>[    1.523964] [drm:intel_print_wm_latency] Sprite WM1 latency 19 (9.5 usec)
>[    1.523965] [drm:intel_print_wm_latency] Sprite WM2 latency 43 (21.5 usec)
>[    1.523966] [drm:intel_print_wm_latency] Cursor WM0 latency 13 (1.3 usec)
>[    1.523967] [drm:intel_print_wm_latency] Cursor WM1 latency 19 (9.5 usec)
>[    1.523968] [drm:intel_print_wm_latency] Cursor WM2 latency 43 (21.5 usec)
>[    1.523970] [drm:intel_modeset_init] 2 display pipes available.
>[    1.523981] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.524430] [drm:intel_lvds_init] LVDS is not present in VBT
>[    1.524470] [drm:intel_crt_reset] pch crt adpa set to 0x80f40000
>[    1.524474] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.524845] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    1.524847] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    1.524893] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.524933] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.524963] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.525070] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.525097] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    1.525151] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    1.525179] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-3
>[    1.525230] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[    1.525246] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.525247] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.525252] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    1.525255] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    1.525260] [drm:intel_modeset_readout_hw_state] [ENCODER:11:DAC-11] hw state readout: enabled, pipe A
>[    1.525262] [drm:intel_modeset_readout_hw_state] [ENCODER:12:TMDS-12] hw state readout: disabled, pipe A
>[    1.525265] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A
>[    1.525267] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    1.525269] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A
>[    1.525271] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.525274] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[    1.525276] [drm:intel_modeset_readout_hw_state] [CONNECTOR:10:VGA-1] hw state readout: enabled
>[    1.525278] [drm:intel_modeset_readout_hw_state] [CONNECTOR:13:HDMI-A-1] hw state readout: disabled
>[    1.525280] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:DP-1] hw state readout: disabled
>[    1.525282] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-2] hw state readout: disabled
>[    1.525285] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-3] hw state readout: disabled
>[    1.525287] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled
>[    1.525289] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:DP-3] hw state readout: disabled
>[    1.525291] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.525292] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.525294] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.525295] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 586736, gmch_n: 8388608, link_m: 48894, link_n: 524288, tu: 64
>[    1.525297] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.525298] [drm:intel_dump_pipe_config] requested mode:
>[    1.525300] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.525301] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.525302] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.525304] [drm:intel_dump_crtc_timings] crtc timings: 25200 640 656 752 800 480 490 492 525, type: 0x0 flags: 0xa
>[    1.525305] [drm:intel_dump_pipe_config] port clock: 25200
>[    1.525306] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.525308] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.525309] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x028001e0, enabled
>[    1.525310] [drm:intel_dump_pipe_config] ips: 0
>[    1.525311] [drm:intel_dump_pipe_config] double wide: 0
>[    1.525312] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.525313] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.525314] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.525316] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.525317] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.525318] [drm:intel_dump_pipe_config] requested mode:
>[    1.525320] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.525321] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.525323] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.525324] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.525325] [drm:intel_dump_pipe_config] port clock: 0
>[    1.525326] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.525328] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.525329] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.525330] [drm:intel_dump_pipe_config] ips: 0
>[    1.525331] [drm:intel_dump_pipe_config] double wide: 0
>[    1.525336] [drm:intel_connector_check_state] [CONNECTOR:10:VGA-1]
>[    1.525342] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[    1.525344] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[    1.525346] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.525348] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.525350] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    1.525352] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.525354] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.525356] [drm:check_crtc_state] [CRTC:5]
>[    1.525367] [drm:check_crtc_state] [CRTC:8]
>[    1.525369] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.525372] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.525379] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 0, size 0x0
>[    1.525381] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000]
>[    1.526911] [drm:i915_gem_context_init] fake context support initialized
>[    1.526926] [drm:init_status_page] render ring hws offset: 0x00001000
>[    1.526927] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    1.526929] [drm:i915_pages_create_for_stolen] offset=0x0, size=131072
>[    1.526950] [drm:init_pipe_control] render ring pipe control offset: 0x00024000
>[    1.526954] [drm:init_status_page] bsd ring hws offset: 0x00025000
>[    1.526955] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    1.526956] [drm:i915_pages_create_for_stolen] offset=0x20000, size=131072
>[    1.526990] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[    1.526992] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.526994] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40000
>[    1.536627] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[    1.536631] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.549585] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.549599] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] probed modes :
>[    1.549605] [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    1.549611] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.549617] [drm:drm_mode_debug_printmodeline] Modeline 28:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.549623] [drm:drm_mode_debug_printmodeline] Modeline 34:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.549629] [drm:drm_mode_debug_printmodeline] Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.549634] [drm:drm_mode_debug_printmodeline] Modeline 36:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.549640] [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.549645] [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.549651] [drm:drm_mode_debug_printmodeline] Modeline 31:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.549656] [drm:drm_mode_debug_printmodeline] Modeline 32:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.549661] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[    1.549664] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.549865] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.549871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.549877] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.549882] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[    1.549886] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.549891] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[    1.549895] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[    1.549898] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.550119] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.550124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.550129] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.550133] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[    1.550137] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.550324] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.550329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.550334] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[    1.550338] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[    1.550342] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.550347] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[    1.550350] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[    1.550353] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.550358] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[    1.550361] [drm:drm_setup_crtcs] 
>[    1.550365] [drm:drm_enable_connectors] connector 10 enabled? yes
>[    1.550367] [drm:drm_enable_connectors] connector 13 enabled? no
>[    1.550370] [drm:drm_enable_connectors] connector 17 enabled? no
>[    1.550373] [drm:drm_enable_connectors] connector 19 enabled? no
>[    1.550376] [drm:drm_enable_connectors] connector 21 enabled? no
>[    1.550378] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.550381] [drm:drm_enable_connectors] connector 25 enabled? no
>[    1.550385] [drm:intel_fb_initial_config] looking for cmdline mode on connector 10
>[    1.550388] [drm:intel_fb_initial_config] looking for preferred mode on connector 10
>[    1.550392] [drm:intel_fb_initial_config] connector VGA-1 on crtc 5: 1280x1024
>[    1.550395] [drm:intel_fb_initial_config] connector 13 not enabled, skipping
>[    1.550397] [drm:intel_fb_initial_config] connector 17 not enabled, skipping
>[    1.550400] [drm:intel_fb_initial_config] connector 19 not enabled, skipping
>[    1.550403] [drm:intel_fb_initial_config] connector 21 not enabled, skipping
>[    1.550406] [drm:intel_fb_initial_config] connector 23 not enabled, skipping
>[    1.550408] [drm:intel_fb_initial_config] connector 25 not enabled, skipping
>[    1.550412] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 5
>[    1.550417] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.550420] [drm:i915_gem_object_create_stolen] creating stolen object: size=500000
>[    1.550425] [drm:i915_pages_create_for_stolen] offset=0x40000, size=5242880
>[    1.551574] [drm:intelfb_create] allocated 1280x1024 fb: 0x00047000, bo ffff8800d3506c00
>[    1.551673] fbcon: inteldrmfb (fb0) is primary device
>[    1.552744] [drm:intel_crtc_cursor_set] cursor off
>[    1.552746] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[    1.552747] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[    1.552748] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.552749] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.552751] [drm:drm_mode_debug_printmodeline] Modeline 37:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    1.552751] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[    1.552752] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.552754] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.552755] [drm:connected_sink_compute_bpp] [CONNECTOR:10:VGA-1] checking for sink bpp constrains
>[    1.552757] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
>[    1.552758] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.552759] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.552759] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.552760] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.552761] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[    1.552762] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.552762] [drm:intel_dump_pipe_config] requested mode:
>[    1.552764] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    1.552764] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.552765] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    1.552767] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>[    1.552767] [drm:intel_dump_pipe_config] port clock: 108000
>[    1.552768] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
>[    1.552769] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.552769] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.552770] [drm:intel_dump_pipe_config] ips: 0
>[    1.552770] [drm:intel_dump_pipe_config] double wide: 0
>[    1.584626] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 5
>[    1.584630] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    1.585049] [drm:intel_get_shared_dpll] CRTC:5 dropping existing PCH DPLL A
>[    1.585050] [drm:intel_get_shared_dpll] CRTC:5 using pre-allocated PCH DPLL A
>[    1.585051] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[    1.585051] [drm:intel_get_shared_dpll] setting up PCH DPLL A
>[    1.585062] [drm:ironlake_update_primary_plane] Writing base 00047000 00000000 0 0 5120
>[    1.585065] [drm:intel_crtc_mode_set] [ENCODER:11:DAC-11] set [MODE:0:1280x1024]
>[    1.585872] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x700
>[    1.585872] [drm:ironlake_fdi_link_train] FDI train 1 done.
>[    1.586025] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600
>[    1.586026] [drm:ironlake_fdi_link_train] FDI train 2 done.
>[    1.586027] [drm:ironlake_fdi_link_train] FDI train done
>[    1.586028] [drm:ironlake_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0)for crtc 5
>[    1.586028] [drm:ironlake_enable_shared_dpll] enabling PCH DPLL A
>[    1.600624] tsc: Refined TSC clocksource calibration: 3199.960 MHz
>[    1.622622] [drm:intel_connector_check_state] [CONNECTOR:10:VGA-1]
>[    1.622631] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[    1.622633] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[    1.622636] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.622638] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.622640] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    1.622642] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.622645] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.622647] [drm:check_crtc_state] [CRTC:5]
>[    1.622661] [drm:check_crtc_state] [CRTC:8]
>[    1.622662] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.622666] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.622670] [drm:intel_crtc_cursor_set] cursor off
>[    1.622671] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.622674] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.622677] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.622709] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[    1.622712] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.622714] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.626041] Console: switching to colour frame buffer device 160x64
>[    1.626044] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[    1.626045] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.626046] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.629467] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.629494] i915 0000:00:02.0: registered panic notifier
>[    1.629565] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.632957] dracut: Starting plymouth daemon
>[    1.637900] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[    1.637904] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.637905] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.643839] [drm:i915_gem_open] 
>[    1.643855] [drm:intel_crtc_cursor_set] cursor off
>[    1.643857] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[    1.643860] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.643862] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.643863] [drm:intel_crtc_cursor_set] cursor off
>[    1.643864] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.643866] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.643867] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.643873] [drm:i915_gem_open] 
>[    1.643878] [drm:intel_crtc_cursor_set] cursor off
>[    1.643879] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[    1.643881] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.643882] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.643884] [drm:intel_crtc_cursor_set] cursor off
>[    1.643884] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.643886] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.643887] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[    1.643891] [drm:i915_gem_open] 
>[    1.643927] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[    1.643929] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[    1.643934] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[    1.643936] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[    1.643939] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.643942] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
>[    1.643943] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.656837] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.656852] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] probed modes :
>[    1.656859] [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    1.656865] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.656870] [drm:drm_mode_debug_printmodeline] Modeline 28:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.656876] [drm:drm_mode_debug_printmodeline] Modeline 34:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.656882] [drm:drm_mode_debug_printmodeline] Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.656888] [drm:drm_mode_debug_printmodeline] Modeline 36:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.656893] [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.656899] [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.656904] [drm:drm_mode_debug_printmodeline] Modeline 31:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.656910] [drm:drm_mode_debug_printmodeline] Modeline 32:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.656919] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[    1.659727] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[    1.659732] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[    1.659734] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.659964] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.659971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.659978] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.659989] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[    1.659996] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[    1.659997] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.660168] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.660172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.660177] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.660188] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.660192] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[    1.660197] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.660202] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[    1.660205] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.660209] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[    1.660212] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.660217] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[    1.660221] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.660225] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[    1.660228] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.660457] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.660463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.660469] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.660476] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.660480] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[    1.660484] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.660700] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.660706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.660711] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.660721] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[    1.660726] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[    1.660729] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.660956] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.660962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.660968] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[    1.660975] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[    1.660979] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[    1.660983] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.661206] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.661212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.661217] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[    1.661227] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.661231] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[    1.661236] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.661240] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[    1.661244] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.661248] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[    1.661251] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.661255] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[    1.661260] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.661264] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[    1.661267] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.661272] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[    1.661276] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.661279] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[    1.661282] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.661287] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[    1.716456] Floppy drive(s): fd0 is 1.44M
>[    1.722777] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    1.722824] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    1.723078] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
>[    1.723244] r8169 0000:03:00.0 eth1: RTL8168d/8111d at 0xffffc90004752000, 6c:f0:49:72:82:c6, XID 083000c0 IRQ 41
>[    1.723304] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    1.723965] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[    1.726688] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20140214/utaddress-258)
>[    1.726778] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.726852] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    1.728349] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    1.729664] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[    1.731230] FDC 0 is a post-1991 82077
>[    1.748369] iTCO_vendor_support: vendor-support=0
>[    1.748528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.748600] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
>[    1.748733] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.749314] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.756313] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
>[    1.756353] sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    1.756381] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    1.756408] sound hdaudioC0D2:    mono: mono_out=0x0
>[    1.756431] sound hdaudioC0D2:    dig-out=0x11/0x1e
>[    1.756452] sound hdaudioC0D2:    inputs:
>[    1.756471] sound hdaudioC0D2:      Rear Mic=0x18
>[    1.756493] sound hdaudioC0D2:      Front Mic=0x19
>[    1.756515] sound hdaudioC0D2:      Line=0x1a
>[    1.756535] sound hdaudioC0D2:      CD=0x1c
>[    1.756581] sound hdaudioC0D2:    dig-in=0x1f
>[    1.778607] firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>[    1.779380] dracut: Checking ext4: /dev/sda2
>[    1.779501] dracut: issuing e2fsck -a  /dev/sda2
>[    1.787676] dracut: /dev/sda2: clean, 909784/14524416 files, 14550934/58095360 blocks
>[    1.788041] dracut: Remounting /dev/sda2 with -o ro
>[    1.796356] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.801619] dracut: Mounted root filesystem /dev/sda2
>[    1.817284] device-mapper: uevent: version 1.0.3
>[    1.818932] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.209116] usb 2-1: New USB device found, idVendor=0bda, idProduct=0158
>[    2.210752] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.212295] usb 2-1: Product: USB2.0-CRW
>[    2.213828] usb 2-1: Manufacturer: Generic
>[    2.215331] usb 2-1: SerialNumber: 20060413092100000
>[    2.218823] usb-storage 2-1:1.0: USB Mass Storage device detected
>[    2.220706] scsi6 : usb-storage 2-1:1.0
>[    2.279750] firewire_core 0000:04:07.0: created device fw0: GUID 0035f206006cf049, S400
>[    2.384089] dracut: Switching root
>[    2.455109] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.462592] systemd[1]: Failed to insert module 'ipv6'
>[    2.464502] systemd[1]: Set hostname to <x-pk2>.
>[    2.467538] random: systemd urandom read with 71 bits of entropy available
>[    2.486888] LVM: Logical Volume autoactivation enabled.
>[    2.488442] LVM: Activation generator successfully completed.
>[    2.496629] usb 7-1: new low-speed USB device number 2 using uhci_hcd
>[    2.551231] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    2.552844] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    2.554471] systemd[1]: Starting Syslog Socket.
>[    2.556063] systemd[1]: Listening on Syslog Socket.
>[    2.557739] systemd[1]: Starting Replay Read-Ahead Data...
>[    2.561348] systemd[1]: Starting Collect Read-Ahead Data...
>[    2.563034] systemd-readahead[2381]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    2.566263] systemd[1]: Starting Delayed Shutdown Socket.
>[    2.566943] systemd-readahead[2382]: Failed to create fanotify object: Function not implemented
>[    2.571063] systemd[1]: Listening on Delayed Shutdown Socket.
>[    2.572673] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    2.576007] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    2.576138] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    2.579357] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    2.579408] systemd[1]: Starting Journal Socket.
>[    2.584532] systemd[1]: Listening on Journal Socket.
>[    2.584602] systemd[1]: Mounting Huge Pages File System...
>[    2.588046] systemd[1]: Starting Journal Service...
>[    2.592933] systemd[1]: Started Journal Service.
>[    2.593241] systemd[1]: Starting udev Kernel Socket.
>[    2.597842] systemd-journald[2385]: Vacuuming done, freed 0 bytes
>[    2.600060] systemd[1]: Listening on udev Kernel Socket.
>[    2.600139] systemd[1]: Starting udev Control Socket.
>[    2.600623] Switched to clocksource tsc
>[    2.607809] systemd[1]: Listening on udev Control Socket.
>[    2.609620] systemd[1]: Starting udev Coldplug all Devices...
>[    2.613997] systemd[1]: Mounting Debug File System...
>[    2.620484] systemd[1]: Starting Encrypted Volumes.
>[    2.622488] systemd[1]: Reached target Encrypted Volumes.
>[    2.624236] systemd[1]: Starting Create static device nodes in /dev...
>[    2.628403] systemd[1]: Mounting POSIX Message Queue File System...
>[    2.632389] systemd[1]: Starting LVM2 metadata daemon socket.
>[    2.635759] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    2.635799] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    2.639077] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    2.639122] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    2.644226] systemd[1]: Expecting device dev-disk-by\x2duuid-f3a1cbf6\x2d2bc7\x2d4b66\x2d9fba\x2dd14f1be17919.device...
>[    2.647226] systemd[1]: Mounting Temporary Directory...
>[    2.651115] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    2.654166] systemd[1]: Started Replay Read-Ahead Data.
>[    2.656103] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    2.659326] systemd[1]: Started Collect Read-Ahead Data.
>[    2.661087] systemd[1]: Mounted Huge Pages File System.
>[    2.664580] systemd[1]: Mounted Debug File System.
>[    2.664648] usb 7-1: New USB device found, idVendor=046d, idProduct=c31c
>[    2.664650] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.664652] usb 7-1: Product: USB Keyboard
>[    2.664653] usb 7-1: Manufacturer: Logitech
>[    2.675179] systemd[1]: Started Create static device nodes in /dev.
>[    2.676913] systemd[1]: Mounted POSIX Message Queue File System.
>[    2.680353] systemd[1]: Mounted Temporary Directory.
>[    2.682061] systemd[1]: Started udev Coldplug all Devices.
>[    2.682317] systemd[1]: Starting udev Kernel Device Manager...
>[    2.687434] systemd[1]: Starting Load legacy module configuration...
>[    2.689351] systemd-udevd[3218]: starting version 204
>[    2.692272] systemd[1]: Started File System Check on Root Device.
>[    2.692309] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    2.697796] systemd[1]: Started Load Kernel Modules.
>[    2.697827] systemd[1]: Mounting FUSE Control File System...
>[    2.698865] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:046D:C31C.0001/input/input4
>[    2.698962] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.1-1/input0
>[    2.705429] systemd[1]: Mounted Configuration File System.
>[    2.705912] systemd[1]: Started Set Up Additional Binary Formats.
>[    2.705941] systemd[1]: Starting Setup Virtual Console...
>[    2.712473] systemd[1]: Starting Apply Kernel Variables...
>[    2.716951] systemd[1]: Started udev Kernel Device Manager.
>[    2.718712] systemd[1]: Mounted FUSE Control File System.
>[    2.718997] systemd[1]: Starting LVM2 metadata daemon...
>[    2.735964] systemd[1]: Started Setup Virtual Console.
>[    2.736247] systemd[1]: Starting Show Plymouth Boot Screen...
>[    2.738288] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    2.744741] systemd[1]: Started Load legacy module configuration.
>[    2.747747] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:046D:C31C.0002/input/input5
>[    2.747849] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.1-1/input1
>[    2.751607] systemd[1]: Started Remount Root and Kernel File Systems.
>[    2.755399] systemd[1]: Started Apply Kernel Variables.
>[    2.759108] systemd[1]: Started LVM2 metadata daemon.
>[    2.761882] systemd[1]: Starting Local File Systems (Pre).
>[    2.764360] systemd[1]: Reached target Local File Systems (Pre).
>[    2.766290] systemd[1]: Starting Configure read-only root support...
>[    2.770055] systemd[1]: Started Import network configuration from initramfs.
>[    2.888245] random: nonblocking pool is initialized
>[    2.894640] systemd-udevd[3233]: renamed network interface eth0 to enp0s26f7u6
>[    2.900515] Adding 2047996k swap on /dev/sda1.  Priority:-1 extents:1 across:2047996k SS
>[    2.948720] systemd-udevd[3237]: renamed network interface p21p1 to enp3s0
>[    3.231374] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[    3.233270] sd 6:0:0:0: Attached scsi generic sg1 type 0
>[    3.235552] sd 6:0:0:0: [sdb] Attached SCSI removable disk
>[   15.309643] end_request: I/O error, dev fd0, sector 0
>[   15.312745] floppy: error -5 while reading block 0
>[   27.499378] end_request: I/O error, dev fd0, sector 0
>[   27.502583] floppy: error -5 while reading block 0
>[   27.512505] audit: type=1305 audit(1400092290.398:2): audit_pid=3303 old=0 auid=4294967295 ses=4294967295 res=1
>[   27.530523] alsactl[3319]: segfault at 1 ip 0000003363c4888d sp 00007fff66c0b6a0 error 4 in libc-2.17.so[3363c00000+1b5000]
>[   28.046617] r8169 0000:03:00.0 enp3s0: link down
>[   30.615531] ax88179_178a 1-6:1.0 enp0s26f7u6: ax88179 - Link status is: 1
>[   36.399573] systemd-journald[2385]: Received request to flush runtime journal from PID 1
>[   36.436051] [drm:intel_crtc_cursor_set] cursor off
>[   36.436055] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[   36.436060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   36.436062] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[   36.436065] [drm:intel_crtc_cursor_set] cursor off
>[   36.436067] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   36.436068] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   36.436070] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[   36.455301] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[   36.455305] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   36.455307] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[  195.000715] [drm:i915_gem_open] 
>[  195.000732] [drm:intel_crtc_cursor_set] cursor off
>[  195.000735] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[  195.000739] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  195.000741] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[  195.000743] [drm:intel_crtc_cursor_set] cursor off
>[  195.000744] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  195.000746] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  195.000747] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[  195.000752] [drm:i915_gem_open] 
>[  195.000853] [drm:i915_gem_open] 
>[  195.000863] [drm:i915_gem_open] 
>[  195.000880] [drm:i915_gem_open] 
>[  195.000898] [drm:i915_gem_open] 
>[  195.000915] [drm:i915_gem_open] 
>[  195.000921] [drm:i915_gem_open] 
>[  195.001028] [drm:i915_gem_open] 
>[  195.001038] [drm:i915_gem_open] 
>[  195.001042] [drm:i915_gem_open] 
>[  195.001047] [drm:i915_gem_open] 
>[  195.001183] [drm:i915_ring_stop_set] Stopping rings 0x80000001
>[  200.814115] [drm] stuck on render ring
>[  200.816619] [drm] GPU HANG: ecode 0:0x5e04ae12, in gem_reset_stats [3702], reason: Ring hung, action: reset
>[  200.816662] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  200.816701] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  200.816741] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  200.816782] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  200.816821] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  200.816981] [drm:i915_error_work_func] resetting chip
>[  200.817013] [drm] Simulated gpu hang, resetting stop_rings
>[  200.817046] [drm:init_status_page] render ring hws offset: 0x00001000
>[  201.819039] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  201.819080] [drm:init_ring_common] render ring head not reset to zero ctl 0001f401 head 00000308 tail 00000390 start 00003000
>[  202.821025] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  202.821062] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 0001f401 head 00000308 tail 00000390 start 00003000
>[  202.821117] [drm:init_status_page] bsd ring hws offset: 0x00025000
>[  202.821127] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  202.821165] [drm:ironlake_update_primary_plane] Writing base 00047000 00000000 0 0 5120
>[  202.821289] [drm:i915_ring_stop_set] Stopping rings 0x80000001
>[  204.814087] [drm] stuck on render ring
>[  204.816585] [drm] GPU HANG: ecode 0:0x5e04ae13, in gem_reset_stats [3702], reason: Ring hung, action: reset
>[  204.816743] [drm:i915_error_work_func] resetting chip
>[  204.816774] [drm] Simulated gpu hang, resetting stop_rings
>[  204.816814] [drm:init_status_page] render ring hws offset: 0x00001000
>[  205.817988] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  205.818027] [drm:init_ring_common] render ring head not reset to zero ctl 0001f401 head 00000308 tail 000005f0 start 00003000
>[  206.819974] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  206.820012] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 0001f401 head 00000308 tail 000005f0 start 00003000
>[  206.820068] [drm:init_status_page] bsd ring hws offset: 0x00025000
>[  206.820077] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  206.820112] [drm:ironlake_update_primary_plane] Writing base 00047000 00000000 0 0 5120
>[  206.820278] [drm:i915_gem_open] 
>[  206.820288] [drm:i915_gem_open] 
>[  208.818005] [drm] stuck on render ring
>[  208.820522] [drm] GPU HANG: ecode 0:0x5e04ae13, reason: Ring hung, action: reset
>[  208.820668] [drm:i915_error_work_func] resetting chip
>[  208.820703] [drm:init_status_page] render ring hws offset: 0x00001000
>[  209.821937] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  209.821976] [drm:init_ring_common] render ring head not reset to zero ctl 0001f401 head 00000308 tail 00000720 start 00003000
>[  210.823924] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  210.823963] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 0001f401 head 00000308 tail 00000720 start 00003000
>[  210.824016] [drm:init_status_page] bsd ring hws offset: 0x00025000
>[  210.824028] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  210.824061] [drm:ironlake_update_primary_plane] Writing base 00047000 00000000 0 0 5120
>[  210.824187] [drm:i915_gem_open] 
>[  210.824200] [drm:i915_gem_open] 
>[  212.813985] [drm] stuck on render ring
>[  212.816473] [drm] GPU HANG: ecode 0:0x5e04ae13, in gem_reset_stats [3702], reason: Ring hung, action: reset
>[  212.816626] [drm:i915_error_work_func] resetting chip
>[  212.816658] [drm:init_status_page] render ring hws offset: 0x00001000
>[  213.817887] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  213.817928] [drm:init_ring_common] render ring head not reset to zero ctl 0001f401 head 00000308 tail 000007b8 start 00003000
>[  214.819874] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  214.819913] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 0001f401 head 00000308 tail 000007b8 start 00003000
>[  214.819968] [drm:init_status_page] bsd ring hws offset: 0x00025000
>[  214.819978] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  214.820012] [drm:ironlake_update_primary_plane] Writing base 00047000 00000000 0 0 5120
>[  214.820202] [drm:intel_crtc_cursor_set] cursor off
>[  214.820205] [drm:intel_crtc_set_config] [CRTC:5] [FB:38] #connectors=1 (x y) (0 0)
>[  214.820208] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  214.820210] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[  214.820212] [drm:intel_crtc_cursor_set] cursor off
>[  214.820213] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  214.820215] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  214.820216] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [CRTC:5]
>[  216.817910] [drm] no progress on render ring
>[  216.820394] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
>[  216.820641] [drm:i915_error_work_func] resetting chip
>[  216.820679] [drm:init_status_page] render ring hws offset: 0x00001000
>[  217.821836] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  217.821875] [drm:init_ring_common] render ring head not reset to zero ctl 0001f401 head 00000308 tail 000007b8 start 00003000
>[  218.823823] [drm:stop_ring] *ERROR* render ring :timed out trying to stop ring
>[  218.823862] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 0001f401 head 00000308 tail 000007b8 start 00003000
>[  218.823914] [drm:init_status_page] bsd ring hws offset: 0x00025000
>[  218.823926] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  218.823961] [drm:ironlake_update_primary_plane] Writing base 00047000 00000000 0 0 5120

Actions: View

Attachments on bug 78685: 99014 | 99015

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.