Attachment 99056 Details for Bug 78723 – dmesg

dmesg

dmesg_bdw05_0515.txt (text/plain), 85.10 KB, created by lu hua on 2014-05-15 06:06:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-05-15 06:06:58 UTC

Size: 85.10 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.15.0-rc3_drm-intel-nightly_c74cad_20140515+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2638 SMP Thu May 15 11:25:40 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_15/drm-intel-nightly/c74cad3c2599b47438b168ca5629fbb00ab63f95/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_15/drm-intel-nightly/c74cad3c2599b47438b168ca5629fbb00ab63f95/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_c74cad_20140515+ acpi_rsdp=0xab7e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7f0afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a7f28fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7f29000-0x00000000aaf4dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE
>[    0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE
>[    0.000000] BRK [0x0323f000, 0x0323ffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03240000, 0x03240fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa7f0afff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa7dfffff] page 2M
>[    0.000000]  [mem 0xa7e00000-0xa7f0afff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]  [mem 0xa7f29000-0xa7ffffff] page 4k
>[    0.000000]  [mem 0xa8000000-0xaadfffff] page 2M
>[    0.000000]  [mem 0xaae00000-0xaaf4dfff] page 4k
>[    0.000000] BRK [0x03241000, 0x03241fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x03242000, 0x03242fff] PGTABLE
>[    0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AB7C9188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000A7F0B000 01DFE9 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AB799000 000040
>[    0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AB79C000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CF000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CE000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CD000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AB7CC000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7CB000 00053B (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CA000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C2000 006F06 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AB7C1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AB7BF000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AB7BE000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AB7BD000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AB7BC000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AB7BB000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xa7f0afff]
>[    0.000000]   node   0: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1025770
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10878 pages used for memmap
>[    0.000000]   DMA32 zone: 696141 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7f0b000-0xa7f28fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74752 r8192 d23552 u262144
>[    0.000000] pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009714
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_15/drm-intel-nightly/c74cad3c2599b47438b168ca5629fbb00ab63f95/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_15/drm-intel-nightly/c74cad3c2599b47438b168ca5629fbb00ab63f95/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_c74cad_20140515+ acpi_rsdp=0xab7e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3935340K/4103080K available (7365K kernel code, 723K rwdata, 3568K rodata, 22752K init, 600K bss, 167740K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.767 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.53 BogoMIPS (lpj=1795767)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000015] ACPI: Core revision 20140214
>[    0.031055] ACPI: All ACPI Tables successfully acquired
>[    0.031083] Security Framework initialized
>[    0.031383] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.032262] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.032665] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032673] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032898] CPU: Physical Processor ID: 0
>[    0.032901] CPU: Processor Core ID: 0
>[    0.034113] mce: CPU supports 7 MCE banks
>[    0.034126] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.034135] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.034135] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.034135] tlb_flushall_shift: 6
>[    0.034598] Freeing SMP alternatives memory: 32K (ffffffff8319e000 - ffffffff831a6000)
>[    0.035277] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.045278] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.045289] TSC deadline timer enabled
>[    0.045297] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.045306] ... version:                3
>[    0.045309] ... bit width:              48
>[    0.045311] ... generic registers:      4
>[    0.045313] ... value mask:             0000ffffffffffff
>[    0.045315] ... max period:             0000ffffffffffff
>[    0.045318] ... fixed-purpose events:   3
>[    0.045320] ... event mask:             000000070000000f
>[    0.045562] x86: Booting SMP configuration:
>[    0.045565] .... node  #0, CPUs:      #1
>[    0.057931] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.060051]  #2<7>[    0.072440] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.086932]  #3
>[    0.086932] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.089009] x86: Booted up 1 node, 4 CPUs
>[    0.089015] smpboot: Total of 4 processors activated (14366.13 BogoMIPS)
>[    0.094173] devtmpfs: initialized
>[    0.094526] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes)
>[    0.094650] xor: automatically using best checksumming function:
>[    0.103924]    avx       : 17200.000 MB/sec
>[    0.103952] RTC time: 17:51:32, date: 05/15/14
>[    0.104001] NET: Registered protocol family 16
>[    0.104223] cpuidle: using governor ladder
>[    0.104226] cpuidle: using governor menu
>[    0.104338] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.104342] ACPI: bus type PCI registered
>[    0.104377] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.104381] PCI: not using MMCONFIG
>[    0.104384] PCI: Using configuration type 1 for base access
>[    0.124955] raid6: sse2x1    5375 MB/s
>[    0.141964] raid6: sse2x2    6621 MB/s
>[    0.158983] raid6: sse2x4    7941 MB/s
>[    0.175993] raid6: avx2x1   10789 MB/s
>[    0.193006] raid6: avx2x2   12386 MB/s
>[    0.210021] raid6: avx2x4   14390 MB/s
>[    0.210023] raid6: using algorithm avx2x4 (14390 MB/s)
>[    0.210026] raid6: using avx2x2 recovery algorithm
>[    0.210075] ACPI: Added _OSI(Module Device)
>[    0.210078] ACPI: Added _OSI(Processor Device)
>[    0.210080] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.210083] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.222317] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.254230] ACPI: SSDT 0x00000000AB57CA18 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.255191] ACPI: Dynamic OEM Table Load:
>[    0.255195] ACPI: SSDT 0x0000000000000000 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.260395] ACPI: SSDT 0x00000000AB57D818 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.261653] ACPI: Dynamic OEM Table Load:
>[    0.261656] ACPI: SSDT 0x0000000000000000 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.266235] ACPI: SSDT 0x00000000AB57BD98 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.267205] ACPI: Dynamic OEM Table Load:
>[    0.267208] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.274688] ACPI: Interpreter enabled
>[    0.274699] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
>[    0.274710] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
>[    0.274737] ACPI: (supports S0 S3 S4 S5)
>[    0.274740] ACPI: Using IOAPIC for interrupt routing
>[    0.274767] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.277185] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.288226] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.288752] ACPI: Power Resource [PG00] (on)
>[    0.296506] ACPI: Power Resource [PG01] (on)
>[    0.304539] ACPI: Power Resource [PG02] (on)
>[    0.335751] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.337128] ACPI: Power Resource [FN00] (off)
>[    0.337232] ACPI: Power Resource [FN01] (off)
>[    0.337318] ACPI: Power Resource [FN02] (off)
>[    0.337397] ACPI: Power Resource [FN03] (off)
>[    0.337476] ACPI: Power Resource [FN04] (off)
>[    0.338606] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.338615] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.339149] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.339758] PCI host bridge to bus 0000:00
>[    0.339763] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.339766] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.339770] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.339773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.339777] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.339788] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.340055] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.340070] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.340079] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.340085] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.340342] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.340351] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.340625] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.340645] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.340708] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.340914] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.340963] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.340986] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.341059] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.341308] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.341329] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.341338] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.341346] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.341409] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.341615] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.341668] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.342032] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.342049] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.342056] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.342064] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.342072] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.342080] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.342088] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.342126] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.342363] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.342378] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.342399] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.342650] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.342679] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.342989] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.345089] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.345148] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.345258] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.345312] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.345371] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345425] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345747] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.345971] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.346084] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.346089] vgaarb: loaded
>[    0.346091] vgaarb: bridge control possible 0000:00:02.0
>[    0.346171] SCSI subsystem initialized
>[    0.346224] libata version 3.00 loaded.
>[    0.346266] ACPI: bus type USB registered
>[    0.346301] usbcore: registered new interface driver usbfs
>[    0.346318] usbcore: registered new interface driver hub
>[    0.346348] usbcore: registered new device driver usb
>[    0.346380] pps_core: LinuxPPS API ver. 1 registered
>[    0.346382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.346390] PTP clock support registered
>[    0.346452] PCI: Using ACPI for IRQ routing
>[    0.352706] PCI: pci_cache_line_size set to 64 bytes
>[    0.352734] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.352736] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.352737] e820: reserve RAM buffer [mem 0xa7f0b000-0xa7ffffff]
>[    0.352739] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff]
>[    0.352741] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.352743] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.352854] NetLabel: Initializing
>[    0.352856] NetLabel:  domain hash size = 128
>[    0.352858] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.352875] NetLabel:  unlabeled traffic allowed by default
>[    0.353003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.353011] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.355039] Switched to clocksource hpet
>[    0.355088] pnp: PnP ACPI init
>[    0.355099] ACPI: bus type PNP registered
>[    0.355410] system 00:00: [io  0x06a4] has been reserved
>[    0.355414] system 00:00: [io  0x06a0] has been reserved
>[    0.355419] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.355553] pnp 00:01: [dma 4]
>[    0.355579] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.355609] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.355723] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.355789] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.355794] system 00:04: [io  0xffff] has been reserved
>[    0.355797] system 00:04: [io  0xffff] has been reserved
>[    0.355800] system 00:04: [io  0xffff] has been reserved
>[    0.355804] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.355807] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.355811] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.355867] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.355912] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.355916] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.356061] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.356194] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.356851] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.356855] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.356859] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.356863] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.356866] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.356870] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.356874] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.356877] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.356995] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.357219] pnp 00:0b: unknown resource type 18 in _CRS
>[    0.357223] pnp 00:0b: can't evaluate _CRS: 1
>[    0.357261] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.357865] pnp 00:0c: unknown resource type 18 in _CRS
>[    0.357868] pnp 00:0c: can't evaluate _CRS: 1
>[    0.357909] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.358424] pnp 00:0d: unknown resource type 18 in _CRS
>[    0.358428] pnp 00:0d: can't evaluate _CRS: 1
>[    0.358476] pnp 00:0d: Plug and Play ACPI device, IDs INT3435 (active)
>[    0.358911] system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.358915] system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.358919] system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.358922] system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.358926] system 00:0e: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.358930] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.358934] system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.358937] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.358941] system 00:0e: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.358945] system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.358948] system 00:0e: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.358952] system 00:0e: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.358956] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.359260] system 00:0f: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.359265] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.359412] pnp: PnP ACPI: found 16 devices
>[    0.359415] ACPI: bus type PNP unregistered
>[    0.366307] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.366312] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.366315] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.366318] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.366348] NET: Registered protocol family 2
>[    0.366531] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.366611] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.366684] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.366708] TCP: reno registered
>[    0.366717] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.366737] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.366789] NET: Registered protocol family 1
>[    0.366852] RPC: Registered named UNIX socket transport module.
>[    0.366855] RPC: Registered udp transport module.
>[    0.366857] RPC: Registered tcp transport module.
>[    0.366860] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.366869] pci 0000:00:02.0: Boot video device
>[    0.366962] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.366966] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.367073] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.367091] PCI: CLS 0 bytes, default 64
>[    0.889834] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.889842] software IO TLB [mem 0xa3f0b000-0xa7f0b000] (64MB) mapped at [ffff8800a3f0b000-ffff8800a7f0afff]
>[    0.889985] Simple Boot Flag at 0x47 set to 0x1
>[    0.890765] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.890796] audit: initializing netlink subsys (disabled)
>[    0.890807] audit: type=2000 audit(1400176292.844:1): initialized
>[    0.923145] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.925021] VFS: Disk quotas dquot_6.5.2
>[    0.925063] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.925782] NFS: Registering the id_resolver key type
>[    0.925790] Key type id_resolver registered
>[    0.925793] Key type id_legacy registered
>[    0.925797] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.925960] fuse init (API version 7.23)
>[    0.926060] msgmni has been set to 7686
>[    0.926279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.926284] io scheduler noop registered
>[    0.926286] io scheduler deadline registered
>[    0.926320] io scheduler cfq registered (default)
>[    0.926392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.926439] efifb: probing for efifb
>[    0.926879] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010800000, using 8100k, total 8100k
>[    0.926883] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.926886] efifb: scrolling: redraw
>[    0.926889] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.934340] Console: switching to colour frame buffer device 240x67
>[    0.941204] fb0: EFI VGA frame buffer device
>[    0.941323] ACPI: Fan [FAN0] (off)
>[    0.941376] ACPI: Fan [FAN1] (off)
>[    0.941426] ACPI: Fan [FAN2] (off)
>[    0.941473] ACPI: Fan [FAN3] (off)
>[    0.941520] ACPI: Fan [FAN4] (off)
>[    0.941929] Monitor-Mwait will be used to enter C-1 state
>[    0.943767] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.943802] ACPI: Thermal Zone [TZ00] (45 C)
>[    0.944567] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.944600] ACPI: Thermal Zone [TZ01] (45 C)
>[    0.944672] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.965374] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.966054] Non-volatile memory driver v1.3
>[    0.966091] Linux agpgart interface v0.103
>[    0.967590] brd: module loaded
>[    0.967725] Loading iSCSI transport class v2.0-870.
>[    0.967950] iscsi: registered transport (tcp)
>[    0.968082] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.968146] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.968289] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
>[    0.968395] iscsi: registered transport (qla4xxx)
>[    0.968445] QLogic iSCSI HBA Driver
>[    0.968506] DC390: clustering now enabled by default. If you get problems load
>[    0.968558]        with "disable_clustering=1" and report to maintainers
>[    0.968625] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.968712] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.968766] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.968866] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.968929] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.968929] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.969080] SCSI Media Changer driver v0.25 
>[    0.969153] ahci 0000:00:1f.2: version 3.0
>[    0.969284] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    0.979853] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    0.979904] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.980504] scsi0 : ahci
>[    0.980624] scsi1 : ahci
>[    0.980725] scsi2 : ahci
>[    0.980832] scsi3 : ahci
>[    0.982221] ata1: DUMMY
>[    0.983542] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    0.984907] ata3: DUMMY
>[    0.986228] ata4: DUMMY
>[    0.988620] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.990030] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.991479] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.992884] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.994281] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.995671] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.997070] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.998469] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    1.000011] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.001450] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.166209] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.167617] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
>[    1.169050] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.170520] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.171971] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.173410] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.174874] usbcore: registered new interface driver catc
>[    1.176302] usbcore: registered new interface driver kaweth
>[    1.177701] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.179127] usbcore: registered new interface driver pegasus
>[    1.180554] usbcore: registered new interface driver rtl8150
>[    1.181984] usbcore: registered new interface driver asix
>[    1.183376] usbcore: registered new interface driver ax88179_178a
>[    1.184769] usbcore: registered new interface driver cdc_ether
>[    1.186151] usbcore: registered new interface driver dm9601
>[    1.187575] usbcore: registered new interface driver gl620a
>[    1.188974] usbcore: registered new interface driver net1080
>[    1.190365] usbcore: registered new interface driver plusb
>[    1.191751] usbcore: registered new interface driver rndis_host
>[    1.193114] usbcore: registered new interface driver cdc_subset
>[    1.194458] usbcore: registered new interface driver zaurus
>[    1.195796] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.197130] usbcore: registered new interface driver cdc_ncm
>[    1.198515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.199838] ehci-pci: EHCI PCI platform driver
>[    1.201164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.202496] ohci-pci: OHCI PCI platform driver
>[    1.203841] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.205291] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.206631] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    1.207968] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.209309] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.210689] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.210707] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.210779] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.212081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.213384] usb usb1: Product: xHCI Host Controller
>[    1.214669] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_c74cad_20140515+ xhci_hcd
>[    1.215986] usb usb1: SerialNumber: 0000:00:14.0
>[    1.217393] hub 1-0:1.0: USB hub found
>[    1.218698] hub 1-0:1.0: 11 ports detected
>[    1.223525] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.224832] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.226157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.227434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.228700] usb usb2: Product: xHCI Host Controller
>[    1.229951] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_c74cad_20140515+ xhci_hcd
>[    1.231221] usb usb2: SerialNumber: 0000:00:14.0
>[    1.232616] hub 2-0:1.0: USB hub found
>[    1.233910] hub 2-0:1.0: 4 ports detected
>[    1.236654] usbcore: registered new interface driver usb-storage
>[    1.238049] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.239401] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.241158] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.242607] mousedev: PS/2 mouse device common for all mice
>[    1.244075] rtc_cmos 00:05: RTC can wake from S4
>[    1.245557] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.246914] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.248264] i2c /dev entries driver
>[    1.249608] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.251164] usbcore: registered new interface driver usbhid
>[    1.252484] usbhid: USB HID core driver
>[    1.253857] TCP: cubic registered
>[    1.255154] Initializing XFRM netlink socket
>[    1.256461] NET: Registered protocol family 17
>[    1.257769] Key type dns_resolver registered
>[    1.259436] registered taskstats version 1
>[    1.261198] Btrfs loaded
>[    1.262727]   Magic number: 14:263:896
>[    1.264088] PM: Hibernation image not present or could not be loaded.
>[    1.264107] Warning: unable to open an initial console.
>[    1.282717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.291741] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.293297] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.294578] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.296179] ata2.00: configured for UDMA/133
>[    1.297586] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5
>[    1.299140] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.299157] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.301908] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.303324] sd 1:0:0:0: [sda] Write Protect is off
>[    1.304718] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.304730] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.307620]  sda: sda1 sda2 sda3
>[    1.309322] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.315289] Freeing unused kernel memory: 22752K (ffffffff81b66000 - ffffffff8319e000)
>[    1.352572] dracut: dracut-018-35.git20120510.fc17
>[    1.382482] udevd[1411]: starting version 182
>[    1.399442] [drm] Initialized drm 1.1.0 20060810
>[    1.402601] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.408521] ACPI: Lid Switch [LID0]
>[    1.410503] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.412380] ACPI: Power Button [PWRB]
>[    1.414015] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.414060] ACPI: Sleep Button [SLPB]
>[    1.414113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.414148] ACPI: Power Button [PWRF]
>[    1.417315] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    1.417315] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.417810] [drm] Memory usable by graphics device = 4096M
>[    1.417811] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.417812] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.417813] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.417815] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.417816] fb: switching to inteldrmfb from EFI VGA
>[    1.431747] Console: switching to colour dummy device 80x25
>[    1.446070] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018
>[    1.446081] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.446083] [drm:intel_opregion_setup] SWSCI supported
>[    1.451671] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.451674] [drm:intel_opregion_setup] ASLE supported
>[    1.451714] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.451724] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.451728] [drm] Driver supports precise vblank timestamp query.
>[    1.451731] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.451733] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.451736] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.451738] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.451740] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.451743] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.451746] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.451749] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.451751] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.451753] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.451756] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.451758] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.451760] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.451762] [drm:parse_mipi] No MIPI config BDB found
>[    1.451765] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.451767] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.451769] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.451771] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.451773] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.451774] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.451831] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.451836] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.451838] [drm:intel_display_power_get] enabling always-on
>[    1.451840] [drm:intel_display_power_get] enabling display
>[    1.451844] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.451904] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.451906] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.451908] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.451909] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.451911] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.451913] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.451915] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.451916] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.451918] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.451919] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.451921] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.451923] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.451924] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.451926] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.451928] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.451930] [drm:intel_modeset_init] 3 display pipes available.
>[    1.451947] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.452252] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.452303] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.452305] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.452307] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.452310] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.452312] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.452408] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.452416] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.452686] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.452855] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.461400] random: nonblocking pool is initialized
>[    1.475422] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.475424] [drm] VBT doesn't support DRRS
>[    1.475460] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.475471] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.475517] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.481666] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.481669] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.481672] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    1.481674] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.481680] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[    1.481682] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.481685] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[    1.481688] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[    1.481690] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled
>[    1.481692] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled
>[    1.481694] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[    1.481697] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.481699] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.481700] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.481703] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.481705] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.481707] [drm:intel_dump_pipe_config] requested mode:
>[    1.481710] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.481711] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.481714] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.481716] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.481718] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.481720] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.481722] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.481724] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.481725] [drm:intel_dump_pipe_config] ips: 0
>[    1.481726] [drm:intel_dump_pipe_config] double wide: 0
>[    1.481729] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.481730] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.481731] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.481734] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.481736] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.481737] [drm:intel_dump_pipe_config] requested mode:
>[    1.481740] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.481741] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.481743] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.481746] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.481747] [drm:intel_dump_pipe_config] port clock: 0
>[    1.481749] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.481750] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.481752] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.481753] [drm:intel_dump_pipe_config] ips: 0
>[    1.481755] [drm:intel_dump_pipe_config] double wide: 0
>[    1.481757] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    1.481758] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.481759] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.481761] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.481763] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.481765] [drm:intel_dump_pipe_config] requested mode:
>[    1.481767] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.481768] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.481771] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.481773] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.481774] [drm:intel_dump_pipe_config] port clock: 0
>[    1.481776] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.481778] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.481779] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.481781] [drm:intel_dump_pipe_config] ips: 0
>[    1.481782] [drm:intel_dump_pipe_config] double wide: 0
>[    1.481788] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    1.481791] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    1.481794] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.481796] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    1.481798] [drm:check_crtc_state] [CRTC:5]
>[    1.481804] [drm:check_crtc_state] [CRTC:8]
>[    1.481807] [drm:check_crtc_state] [CRTC:11]
>[    1.481813] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.481815] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.481818] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.481821] [drm:intel_alloc_plane_obj] plane fb obj ffff8800aa866600
>[    1.481824] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.481826] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.484958] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.484960] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.484963] [drm:i915_gem_context_init] HW context support initialized
>[    1.484981] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.485065] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.485070] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.485135] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.485200] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.485437] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[    1.485440] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[    1.485449] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.485453] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[    1.485457] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.485460] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.485462] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1]
>[    1.485464] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.485468] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1] disconnected
>[    1.485470] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-1]
>[    1.485472] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[    1.485628] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.485639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.485642] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-1] disconnected
>[    1.485643] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[    1.485645] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[    1.485797] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.485799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.485800] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[    1.485802] [drm:drm_setup_crtcs] 
>[    1.485804] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.485805] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.485807] [drm:drm_enable_connectors] connector 24 enabled? no
>[    1.485808] [drm:drm_enable_connectors] connector 26 enabled? no
>[    1.485811] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.485813] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    1.485815] [drm:intel_fb_initial_config] connector eDP-1 on pipe 65 [CRTC:5]: 1920x1080
>[    1.485817] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.485819] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.485820] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.485822] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[    1.485824] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.485826] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.485829] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.487186] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff8800aa867680
>[    1.487264] fbcon: inteldrmfb (fb0) is primary device
>[    1.487317] [drm:intel_crtc_cursor_set] cursor off
>[    1.487320] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    1.487322] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.487326] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.487329] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.487331] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.487333] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    1.487336] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.487338] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[    1.487342] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.487343] [drm:intel_dp_compute_config] using min 2 lanes per VBT
>[    1.487344] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[    1.487350] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.487351] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.487353] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.487355] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.487355] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.487356] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.487358] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.487360] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.487360] [drm:intel_dump_pipe_config] requested mode:
>[    1.487362] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.487363] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.487365] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.487367] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.487368] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.487369] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.487370] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.487371] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.487372] [drm:intel_dump_pipe_config] ips: 1
>[    1.487372] [drm:intel_dump_pipe_config] double wide: 0
>[    1.502632] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.502638] [drm:intel_edp_backlight_off] 
>[    1.520805] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.584640] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.703582] [drm:wait_panel_off] Wait for panel power off time
>[    1.703585] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.751902] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[    1.751903] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.751905] usb 1-1: Product: USB Optical Mouse
>[    1.751906] usb 1-1: Manufacturer: Logitech
>[    1.751994] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.753860] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input5
>[    1.753991] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[    1.758566] [drm:wait_panel_status] Wait complete
>[    1.758571] [drm:intel_update_fbc] no output, disabling
>[    1.758576] [drm:intel_display_power_put] disabling display
>[    1.758577] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.758589] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[    1.758594] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[    1.758595] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[    1.758597] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.758599] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.891514] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    1.906521] usb 1-2: new high-speed USB device number 3 using xhci_hcd
>[    2.091571] usb 1-2: New USB device found, idVendor=0b95, idProduct=7720
>[    2.091573] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.091575] usb 1-2: Product: AX88772 
>[    2.091576] usb 1-2: SerialNumber: 00CC2C
>[    2.304361] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.304363] [drm:wait_panel_status] Wait complete
>[    2.304366] [drm:wait_panel_on] Wait for panel power on
>[    2.304369] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.394840] asix 1-2:1.0 eth1: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:90:99
>[    2.513289] [drm:wait_panel_status] Wait complete
>[    2.513293] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.513299] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.514381] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.514839] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.515597] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.515804] [drm:intel_edp_backlight_on] 
>[    2.515807] [drm:intel_panel_enable_backlight] pipe A
>[    2.515812] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.515814] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.535279] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    2.535283] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    2.535286] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    2.535288] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    2.535289] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.535290] [drm:check_crtc_state] [CRTC:5]
>[    2.535296] [drm:check_crtc_state] [CRTC:8]
>[    2.535298] [drm:check_crtc_state] [CRTC:11]
>[    2.535300] [drm:intel_crtc_cursor_set] cursor off
>[    2.535302] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.535304] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.535305] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.535307] [drm:intel_crtc_cursor_set] cursor off
>[    2.535307] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.535309] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.535310] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.535315] Console: switching to colour frame buffer device 240x67
>[    2.535322] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.535323] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.535325] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.543262] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.543301] i915 0000:00:02.0: registered panic notifier
>[    2.547290] usb 1-5: new low-speed USB device number 4 using xhci_hcd
>[    2.552766] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.553376] acpi device:16: registered as cooling_device9
>[    2.553512] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    2.553674] [drm] RC6 disabled, disabling runtime PM support
>[    2.553736] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.557664] dracut: Starting plymouth daemon
>[    2.565298] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.565301] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.565303] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575839] [drm:i915_gem_open] 
>[    2.575864] [drm:intel_crtc_cursor_set] cursor off
>[    2.575867] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.575871] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.575874] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575877] [drm:intel_crtc_cursor_set] cursor off
>[    2.575878] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.575880] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.575883] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575884] [drm:intel_crtc_cursor_set] cursor off
>[    2.575886] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.575888] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.575890] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575899] [drm:i915_gem_open] 
>[    2.575908] [drm:intel_crtc_cursor_set] cursor off
>[    2.575910] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.575912] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.575914] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575916] [drm:intel_crtc_cursor_set] cursor off
>[    2.575917] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.575919] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.575921] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575922] [drm:intel_crtc_cursor_set] cursor off
>[    2.575924] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.575926] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.575927] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.575933] [drm:i915_gem_open] 
>[    2.576187] [drm:intel_crtc_cursor_set] cursor off
>[    2.576191] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.576195] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.576198] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.576201] [drm:intel_crtc_cursor_set] cursor off
>[    2.576203] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.576206] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.576209] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.576212] [drm:intel_crtc_cursor_set] cursor off
>[    2.576214] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.576217] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.576220] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.576399] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.581991] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.581994] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.581996] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.652937] ACPI: AC Adapter [ADP1] (on-line)
>[    2.655176] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.655417] [drm:intel_display_power_get] enabling display
>[    2.655422] [drm:hsw_set_power_well] Enabling power well
>[    2.655465] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.703786] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.703870] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.716476] usb 1-5: New USB device found, idVendor=413c, idProduct=2107
>[    2.716588] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.716687] usb 1-5: Product: Dell USB Entry Keyboard
>[    2.716755] usb 1-5: Manufacturer: DELL
>[    2.716934] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.720721] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2107.0002/input/input7
>[    2.720966] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-5/input0
>[    2.737842] ACPI: Battery Slot [BAT0] (battery present)
>[    2.738005] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.738310] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.743118] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.746593] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
>[    2.748640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.753261] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.768696] iTCO_vendor_support: vendor-support=0
>[    2.772506] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.776320] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.781524] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.784808] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.784812] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.784815] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.793013] ppdev: user-space parallel port driver
>[    2.891205] Switched to clocksource tsc
>[    2.947150] EXT4-fs (sda2): recovery complete
>[    2.949320] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.980338] dracut: Checking ext4: /dev/sda2
>[    2.982536] dracut: issuing e2fsck -a  /dev/sda2
>[    2.997670] dracut: /dev/sda2: clean, 685761/13598720 files, 22278319/54372608 blocks
>[    3.000108] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    3.014970] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    3.020519] dracut: Mounted root filesystem /dev/sda2
>[    3.032959] device-mapper: uevent: version 1.0.3
>[    3.035157] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    3.074830] dracut: Switching root
>[    3.141195] init: ureadahead main process (2848) terminated with status 5
>[    3.249891] systemd-udevd[2958]: starting version 204
>[    3.412965] systemd-udevd[3608]: could not open moddep file '/lib/modules/3.15.0-rc3_drm-intel-nightly_c74cad_20140515+/modules.dep.bin'
>[    3.424814] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.424819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.424822] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.449785] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.449790] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.449793] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.459760] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.459763] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.459765] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.486355] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    3.486995] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.489090] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.524324] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.524329] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.524332] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.541382] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.571950] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.574116] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.602547] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.606441] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.663644] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.670241] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.733233] init: failsafe main process (3876) killed by TERM signal
>[    3.772380] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    3.779752] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.785067] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.911368] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    4.167356] init: avahi-cups-reload main process (4155) terminated with status 1
>[    4.213213] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    4.213218] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.213221] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    4.235925] init: lightdm main process (4118) terminated with status 1
>[    4.240650] init: plymouth-ready (startup) main process (2845) terminated with status 1
>[    4.458592] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.458601] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.951520] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    5.052397] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    6.678158] asix 1-2:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>[    9.045213] init: failsafe-x main process (4376) terminated with status 127
>[   63.945934] usb 1-1: USB disconnect, device number 2
>[   65.467637] usb 1-1: new low-speed USB device number 5 using xhci_hcd
>[   65.634947] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[   65.634951] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   65.634953] usb 1-1: Product: USB Optical Mouse
>[   65.634955] usb 1-1: Manufacturer: Logitech
>[   65.635043] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   65.636818] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0003/input/input9
>[   65.636947] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  100.255212] [drm:i915_gem_open] 
>[  100.255245] [drm:intel_crtc_cursor_set] cursor off
>[  100.255249] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  100.255253] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  100.255257] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  100.255259] [drm:intel_crtc_cursor_set] cursor off
>[  100.255261] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  100.255263] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  100.255265] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  100.255267] [drm:intel_crtc_cursor_set] cursor off
>[  100.255268] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  100.255271] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  100.255272] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  100.255282] [drm:i915_gem_open] 
>[  100.255650] [drm:i915_gem_open] 
>[  100.255668] [drm:i915_gem_open] 
>[  100.255678] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[  100.255681] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[  100.255696] [drm:i915_gem_open] 
>[  100.255706] [drm:i915_gem_open] 
>[  100.255722] [drm:i915_gem_open] 
>[  100.255731] [drm:i915_gem_open] 
>[  100.255780] [drm:i915_gem_open] 
>[  100.255790] [drm:i915_gem_open] 
>[  100.256101] [drm:i915_gem_open] 
>[  100.256115] [drm:i915_gem_open] 
>[  100.256120] [drm:i915_gem_open] 
>[  100.256129] [drm:i915_gem_open] 
>[  100.256199] [drm:i915_ring_stop_set] Stopping rings 0x80000004
>[  106.713869] [drm] stuck on blitter ring
>[  106.715357] [drm] GPU HANG: ecode 2:0xe77ffff2, in gem_reset_stats [4470], reason: Ring hung, action: reset
>[  106.715360] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  106.715362] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  106.715366] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  106.715370] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  106.715371] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  106.715409] [drm:i915_error_work_func] resetting chip
>[  106.716771] [drm] Simulated gpu hang, resetting stop_rings
>[  106.716781] [drm:init_status_page] render ring hws offset: 0x007fb000
>[  106.716795] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[  106.716805] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[  106.716814] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[  106.716843] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  106.716846] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  106.716925] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[  106.716992] [drm:i915_ring_stop_set] Stopping rings 0x80000004
>[  112.711645] [drm] stuck on blitter ring
>[  112.712839] [drm] GPU HANG: ecode 2:0xe77ffff2, in gem_reset_stats [4470], reason: Ring hung, action: reset
>[  112.712891] [drm:i915_error_work_func] resetting chip
>[  112.714606] [drm] Simulated gpu hang, resetting stop_rings
>[  112.714616] [drm:init_status_page] render ring hws offset: 0x007fb000
>[  112.714654] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[  112.714663] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[  112.714670] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[  112.714698] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  112.714700] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  112.714772] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[  112.714915] [drm:i915_gem_open] 
>[  112.714931] [drm:i915_gem_open] 
>[  112.715094] [drm:i915_gem_open] 
>[  112.715106] [drm:i915_gem_open] 
>[  112.715153] [drm:i915_gem_open] 
>[  112.715162] [drm:i915_gem_open] 
>[  112.715358] [drm:intel_crtc_cursor_set] cursor off
>[  112.715362] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  112.715366] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  112.715368] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  112.715371] [drm:intel_crtc_cursor_set] cursor off
>[  112.715372] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  112.715375] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  112.715377] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  112.715379] [drm:intel_crtc_cursor_set] cursor off
>[  112.715380] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  112.715382] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  112.715384] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  125.635660] usb 1-1: USB disconnect, device number 5
>[  127.157437] usb 1-1: new low-speed USB device number 6 using xhci_hcd
>[  127.324677] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  127.324681] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  127.324683] usb 1-1: Product: USB Optical Mouse
>[  127.324685] usb 1-1: Manufacturer: Logitech
>[  127.324771] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  127.326589] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0004/input/input10
>[  127.326739] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  187.325416] usb 1-1: USB disconnect, device number 6
>[  188.846247] usb 1-1: new low-speed USB device number 7 using xhci_hcd
>[  189.013521] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  189.013525] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  189.013528] usb 1-1: Product: USB Optical Mouse
>[  189.013530] usb 1-1: Manufacturer: Logitech
>[  189.013615] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  189.015379] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0005/input/input11
>[  189.015535] hid-generic 0003:046D:C077.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  249.015157] usb 1-1: USB disconnect, device number 7
>[  250.537027] usb 1-1: new low-speed USB device number 8 using xhci_hcd
>[  250.704361] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  250.704364] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  250.704366] usb 1-1: Product: USB Optical Mouse
>[  250.704368] usb 1-1: Manufacturer: Logitech
>[  250.704456] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  250.706218] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0006/input/input12
>[  250.706373] hid-generic 0003:046D:C077.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  310.704851] usb 1-1: USB disconnect, device number 8
>[  312.226834] usb 1-1: new low-speed USB device number 9 using xhci_hcd
>[  312.394269] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  312.394272] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  312.394274] usb 1-1: Product: USB Optical Mouse
>[  312.394276] usb 1-1: Manufacturer: Logitech
>[  312.394372] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  312.396186] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0007/input/input13
>[  312.396345] hid-generic 0003:046D:C077.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  372.394570] usb 1-1: USB disconnect, device number 9
>[  373.916607] usb 1-1: new low-speed USB device number 10 using xhci_hcd
>[  374.084002] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  374.084008] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  374.084012] usb 1-1: Product: USB Optical Mouse
>[  374.084016] usb 1-1: Manufacturer: Logitech
>[  374.084134] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  374.085956] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0008/input/input14
>[  374.086128] hid-generic 0003:046D:C077.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0

Actions: View

Attachments on bug 78723: 99056 | 99057

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.