Attachment 99389 Details for Bug 78946 – dmesg

dmesg

sol-reset-not-gen7.dmesg (text/plain), 109.98 KB, created by Guo Jinxian on 2014-05-20 06:24:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-05-20 06:24:08 UTC

Size: 109.98 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.15.0-rc3_drm-intel-fixes_e95a2f_20140520+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2818 SMP Tue May 20 12:00:08 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_20/drm-intel-fixes/e95a2f7509f5219177d6821a0a8754f93892ca56/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_20/drm-intel-fixes/e95a2f7509f5219177d6821a0a8754f93892ca56/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-fixes_e95a2f_20140520+ acpi_rsdp=0xab7e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7f0afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a7f28fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a7f29000-0x00000000aaf4dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03239000, 0x03239fff] PGTABLE
>[    0.000000] BRK [0x0323a000, 0x0323afff] PGTABLE
>[    0.000000] BRK [0x0323b000, 0x0323bfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x0323c000, 0x0323cfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa7f0afff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa7dfffff] page 2M
>[    0.000000]  [mem 0xa7e00000-0xa7f0afff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]  [mem 0xa7f29000-0xa7ffffff] page 4k
>[    0.000000]  [mem 0xa8000000-0xaadfffff] page 2M
>[    0.000000]  [mem 0xaae00000-0xaaf4dfff] page 4k
>[    0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE
>[    0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AB7C9188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000A7F0B000 01DFE9 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AB799000 000040
>[    0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AB79C000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CF000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CE000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CD000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AB7CC000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7CB000 00053B (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CA000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C2000 006F06 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AB7C1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AB7BF000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AB7BE000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AB7BD000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AB7BC000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AB7BB000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xa7f0afff]
>[    0.000000]   node   0: [mem 0xa7f29000-0xaaf4dfff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1025770
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10878 pages used for memmap
>[    0.000000]   DMA32 zone: 696141 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa7f0b000-0xa7f28fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74752 r8192 d23552 u262144
>[    0.000000] pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009714
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_20/drm-intel-fixes/e95a2f7509f5219177d6821a0a8754f93892ca56/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_20/drm-intel-fixes/e95a2f7509f5219177d6821a0a8754f93892ca56/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-fixes_e95a2f_20140520+ acpi_rsdp=0xab7e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3935356K/4103080K available (7365K kernel code, 723K rwdata, 3568K rodata, 22736K init, 600K bss, 167724K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.834 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.66 BogoMIPS (lpj=1795834)
>[    0.000009] pid_max: default: 32768 minimum: 301
>[    0.000017] ACPI: Core revision 20140214
>[    0.031052] ACPI: All ACPI Tables successfully acquired
>[    0.031080] Security Framework initialized
>[    0.031381] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.032277] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.032678] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032687] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032913] CPU: Physical Processor ID: 0
>[    0.032916] CPU: Processor Core ID: 0
>[    0.034128] mce: CPU supports 7 MCE banks
>[    0.034141] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.034150] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.034150] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.034150] tlb_flushall_shift: 6
>[    0.034609] Freeing SMP alternatives memory: 32K (ffffffff8319a000 - ffffffff831a2000)
>[    0.035287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.045288] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.045299] TSC deadline timer enabled
>[    0.045308] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.045317] ... version:                3
>[    0.045319] ... bit width:              48
>[    0.045321] ... generic registers:      4
>[    0.045324] ... value mask:             0000ffffffffffff
>[    0.045326] ... max period:             0000ffffffffffff
>[    0.045328] ... fixed-purpose events:   3
>[    0.045331] ... event mask:             000000070000000f
>[    0.045573] x86: Booting SMP configuration:
>[    0.045576] .... node  #0, CPUs:      #1
>[    0.057942] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.060066]  #2<7>[    0.072455] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.086947]  #3
>[    0.086947] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.089025] x86: Booted up 1 node, 4 CPUs
>[    0.089032] smpboot: Total of 4 processors activated (14366.67 BogoMIPS)
>[    0.094192] devtmpfs: initialized
>[    0.094544] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes)
>[    0.094666] xor: automatically using best checksumming function:
>[    0.103941]    avx       : 17204.000 MB/sec
>[    0.103969] RTC time: 17:14:39, date: 05/20/14
>[    0.104018] NET: Registered protocol family 16
>[    0.104241] cpuidle: using governor ladder
>[    0.104244] cpuidle: using governor menu
>[    0.104357] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.104360] ACPI: bus type PCI registered
>[    0.104394] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.104399] PCI: not using MMCONFIG
>[    0.104401] PCI: Using configuration type 1 for base access
>[    0.124982] raid6: sse2x1    5570 MB/s
>[    0.141996] raid6: sse2x2    6640 MB/s
>[    0.159022] raid6: sse2x4    7964 MB/s
>[    0.176046] raid6: avx2x1   10882 MB/s
>[    0.193068] raid6: avx2x2   12414 MB/s
>[    0.210095] raid6: avx2x4   14441 MB/s
>[    0.210098] raid6: using algorithm avx2x4 (14441 MB/s)
>[    0.210101] raid6: using avx2x2 recovery algorithm
>[    0.210142] ACPI: Added _OSI(Module Device)
>[    0.210145] ACPI: Added _OSI(Processor Device)
>[    0.210147] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.210150] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.225371] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.259303] ACPI: SSDT 0x00000000AB57CA18 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.260267] ACPI: Dynamic OEM Table Load:
>[    0.260271] ACPI: SSDT 0x0000000000000000 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.265469] ACPI: SSDT 0x00000000AB57D818 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.266729] ACPI: Dynamic OEM Table Load:
>[    0.266733] ACPI: SSDT 0x0000000000000000 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.271313] ACPI: SSDT 0x00000000AB57BD98 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.272288] ACPI: Dynamic OEM Table Load:
>[    0.272291] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.281654] ACPI: Interpreter enabled
>[    0.281665] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
>[    0.281676] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
>[    0.281701] ACPI: (supports S0 S3 S4 S5)
>[    0.281704] ACPI: Using IOAPIC for interrupt routing
>[    0.281730] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.284133] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.295159] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.295690] ACPI: Power Resource [PG00] (on)
>[    0.302592] ACPI: Power Resource [PG01] (on)
>[    0.310622] ACPI: Power Resource [PG02] (on)
>[    0.335801] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.337184] ACPI: Power Resource [FN00] (off)
>[    0.337268] ACPI: Power Resource [FN01] (off)
>[    0.337347] ACPI: Power Resource [FN02] (off)
>[    0.337434] ACPI: Power Resource [FN03] (off)
>[    0.337513] ACPI: Power Resource [FN04] (off)
>[    0.338660] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.338669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.339201] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.339811] PCI host bridge to bus 0000:00
>[    0.339816] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.339820] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.339824] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.339827] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.339831] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.339844] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.340109] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.340124] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.340133] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.340139] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.340399] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.340408] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.340683] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.340702] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.340764] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.340971] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.341019] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.341039] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.341104] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.341353] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.341371] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.341379] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.341389] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.341453] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.341661] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.341714] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.342061] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.342077] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.342085] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.342093] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.342100] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.342108] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.342116] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.342154] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.342387] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.342405] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.342426] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.342696] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.342725] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.343038] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.345140] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.345199] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345255] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.345309] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.345363] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.345422] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345477] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.345800] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.346023] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.346136] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.346141] vgaarb: loaded
>[    0.346143] vgaarb: bridge control possible 0000:00:02.0
>[    0.346225] SCSI subsystem initialized
>[    0.346280] libata version 3.00 loaded.
>[    0.346322] ACPI: bus type USB registered
>[    0.346359] usbcore: registered new interface driver usbfs
>[    0.346375] usbcore: registered new interface driver hub
>[    0.346411] usbcore: registered new device driver usb
>[    0.346444] pps_core: LinuxPPS API ver. 1 registered
>[    0.346447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.346457] PTP clock support registered
>[    0.346519] PCI: Using ACPI for IRQ routing
>[    0.352563] PCI: pci_cache_line_size set to 64 bytes
>[    0.352591] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.352593] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.352594] e820: reserve RAM buffer [mem 0xa7f0b000-0xa7ffffff]
>[    0.352596] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff]
>[    0.352598] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.352600] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.352713] NetLabel: Initializing
>[    0.352716] NetLabel:  domain hash size = 128
>[    0.352718] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.352732] NetLabel:  unlabeled traffic allowed by default
>[    0.352881] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.352890] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.354923] Switched to clocksource hpet
>[    0.355064] pnp: PnP ACPI init
>[    0.355077] ACPI: bus type PNP registered
>[    0.355381] system 00:00: [io  0x06a4] has been reserved
>[    0.355385] system 00:00: [io  0x06a0] has been reserved
>[    0.355390] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.355527] pnp 00:01: [dma 4]
>[    0.355554] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.355587] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.355701] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.355768] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.355773] system 00:04: [io  0xffff] has been reserved
>[    0.355776] system 00:04: [io  0xffff] has been reserved
>[    0.355780] system 00:04: [io  0xffff] has been reserved
>[    0.355784] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.355787] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.355791] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.355845] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.355891] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.355896] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.356046] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.356175] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.356831] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.356836] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.356840] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.356844] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.356847] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.356851] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.356855] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.356859] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.356990] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.357205] pnp 00:0b: unknown resource type 18 in _CRS
>[    0.357208] pnp 00:0b: can't evaluate _CRS: 1
>[    0.357247] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.357849] pnp 00:0c: unknown resource type 18 in _CRS
>[    0.357853] pnp 00:0c: can't evaluate _CRS: 1
>[    0.357893] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.358414] pnp 00:0d: unknown resource type 18 in _CRS
>[    0.358418] pnp 00:0d: can't evaluate _CRS: 1
>[    0.358468] pnp 00:0d: Plug and Play ACPI device, IDs INT3435 (active)
>[    0.358903] system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.358908] system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.358912] system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.358922] system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.358926] system 00:0e: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.358929] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.358933] system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.358937] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.358940] system 00:0e: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.358944] system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.358948] system 00:0e: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.358951] system 00:0e: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.358955] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.359254] system 00:0f: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.359259] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.359406] pnp: PnP ACPI: found 16 devices
>[    0.359409] ACPI: bus type PNP unregistered
>[    0.366356] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.366361] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.366364] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.366368] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.366394] NET: Registered protocol family 2
>[    0.366569] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.366649] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.366720] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.366745] TCP: reno registered
>[    0.366755] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.366773] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.366825] NET: Registered protocol family 1
>[    0.366920] RPC: Registered named UNIX socket transport module.
>[    0.366927] RPC: Registered udp transport module.
>[    0.366929] RPC: Registered tcp transport module.
>[    0.366932] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.366943] pci 0000:00:02.0: Boot video device
>[    0.367051] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.367055] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.367148] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.367165] PCI: CLS 0 bytes, default 64
>[    0.888596] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.888604] software IO TLB [mem 0xa3f0b000-0xa7f0b000] (64MB) mapped at [ffff8800a3f0b000-ffff8800a7f0afff]
>[    0.888745] Simple Boot Flag at 0x47 set to 0x1
>[    0.889535] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.889564] audit: initializing netlink subsys (disabled)
>[    0.889581] audit: type=2000 audit(1400606079.843:1): initialized
>[    0.921849] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.923679] VFS: Disk quotas dquot_6.5.2
>[    0.923733] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.924451] NFS: Registering the id_resolver key type
>[    0.924460] Key type id_resolver registered
>[    0.924463] Key type id_legacy registered
>[    0.924468] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.924621] fuse init (API version 7.23)
>[    0.924730] msgmni has been set to 7686
>[    0.924957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.924963] io scheduler noop registered
>[    0.924965] io scheduler deadline registered
>[    0.924999] io scheduler cfq registered (default)
>[    0.925070] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.925118] efifb: probing for efifb
>[    0.925547] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010800000, using 8100k, total 8100k
>[    0.925551] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.925553] efifb: scrolling: redraw
>[    0.925556] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.932845] Console: switching to colour frame buffer device 240x67
>[    0.939368] fb0: EFI VGA frame buffer device
>[    0.939493] ACPI: Fan [FAN0] (off)
>[    0.939545] ACPI: Fan [FAN1] (off)
>[    0.939593] ACPI: Fan [FAN2] (off)
>[    0.939641] ACPI: Fan [FAN3] (off)
>[    0.939688] ACPI: Fan [FAN4] (off)
>[    0.940108] Monitor-Mwait will be used to enter C-1 state
>[    0.941861] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.941900] ACPI: Thermal Zone [TZ00] (45 C)
>[    0.942649] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.942682] ACPI: Thermal Zone [TZ01] (45 C)
>[    0.942770] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.963471] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.964073] Non-volatile memory driver v1.3
>[    0.964102] Linux agpgart interface v0.103
>[    0.965538] brd: module loaded
>[    0.965669] Loading iSCSI transport class v2.0-870.
>[    0.965857] iscsi: registered transport (tcp)
>[    0.965956] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.966001] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.966108] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
>[    0.966189] iscsi: registered transport (qla4xxx)
>[    0.966232] QLogic iSCSI HBA Driver
>[    0.966280] DC390: clustering now enabled by default. If you get problems load
>[    0.966323]        with "disable_clustering=1" and report to maintainers
>[    0.966384] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.966453] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.966496] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.966565] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.966618] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.966618] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.966761] SCSI Media Changer driver v0.25 
>[    0.966814] ahci 0000:00:1f.2: version 3.0
>[    0.966936] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    0.977737] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    0.977789] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.978289] scsi0 : ahci
>[    0.978411] scsi1 : ahci
>[    0.978509] scsi2 : ahci
>[    0.978609] scsi3 : ahci
>[    0.980002] ata1: DUMMY
>[    0.981325] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    0.982678] ata3: DUMMY
>[    0.984007] ata4: DUMMY
>[    0.986396] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.987804] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.989246] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.990649] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.992069] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.993458] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.994864] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.996262] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.997811] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.999242] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.163089] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.164501] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    1.165951] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.167409] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.168854] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.170282] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.171757] usbcore: registered new interface driver catc
>[    1.173191] usbcore: registered new interface driver kaweth
>[    1.174580] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.176013] usbcore: registered new interface driver pegasus
>[    1.177432] usbcore: registered new interface driver rtl8150
>[    1.178854] usbcore: registered new interface driver asix
>[    1.180231] usbcore: registered new interface driver ax88179_178a
>[    1.181639] usbcore: registered new interface driver cdc_ether
>[    1.183017] usbcore: registered new interface driver dm9601
>[    1.184406] usbcore: registered new interface driver gl620a
>[    1.185787] usbcore: registered new interface driver net1080
>[    1.187171] usbcore: registered new interface driver plusb
>[    1.188537] usbcore: registered new interface driver rndis_host
>[    1.189893] usbcore: registered new interface driver cdc_subset
>[    1.191243] usbcore: registered new interface driver zaurus
>[    1.192563] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.193912] usbcore: registered new interface driver cdc_ncm
>[    1.195271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.196586] ehci-pci: EHCI PCI platform driver
>[    1.197909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.199222] ohci-pci: OHCI PCI platform driver
>[    1.200533] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.201947] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.203274] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    1.204603] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.205998] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.207411] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.207428] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.207488] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.208806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.210091] usb usb1: Product: xHCI Host Controller
>[    1.211360] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-fixes_e95a2f_20140520+ xhci_hcd
>[    1.212664] usb usb1: SerialNumber: 0000:00:14.0
>[    1.214063] hub 1-0:1.0: USB hub found
>[    1.215350] hub 1-0:1.0: 11 ports detected
>[    1.220144] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.221457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.222762] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.224036] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.225303] usb usb2: Product: xHCI Host Controller
>[    1.226561] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-fixes_e95a2f_20140520+ xhci_hcd
>[    1.227853] usb usb2: SerialNumber: 0000:00:14.0
>[    1.229271] hub 2-0:1.0: USB hub found
>[    1.230579] hub 2-0:1.0: 4 ports detected
>[    1.233282] usbcore: registered new interface driver usb-storage
>[    1.234652] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.235972] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.237731] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.239171] mousedev: PS/2 mouse device common for all mice
>[    1.240625] rtc_cmos 00:05: RTC can wake from S4
>[    1.242111] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.243449] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.244783] i2c /dev entries driver
>[    1.246132] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.247675] usbcore: registered new interface driver usbhid
>[    1.248989] usbhid: USB HID core driver
>[    1.250374] TCP: cubic registered
>[    1.251667] Initializing XFRM netlink socket
>[    1.252959] NET: Registered protocol family 17
>[    1.254247] Key type dns_resolver registered
>[    1.255884] registered taskstats version 1
>[    1.257627] Btrfs loaded
>[    1.259218]   Magic number: 14:467:239
>[    1.260483] fan PNP0C0B:04: hash matches
>[    1.261802] PM: Hibernation image not present or could not be loaded.
>[    1.261820] Warning: unable to open an initial console.
>[    1.278267] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.289614] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.291139] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.292427] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.294021] ata2.00: configured for UDMA/133
>[    1.295421] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5
>[    1.296974] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.296992] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.299752] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.301191] sd 1:0:0:0: [sda] Write Protect is off
>[    1.302586] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.302600] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.305488]  sda: sda1 sda2 sda3
>[    1.307196] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.313204] Freeing unused kernel memory: 22736K (ffffffff81b66000 - ffffffff8319a000)
>[    1.350302] dracut: dracut-018-35.git20120510.fc17
>[    1.380066] udevd[1411]: starting version 182
>[    1.396903] [drm] Initialized drm 1.1.0 20060810
>[    1.400038] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.403413] ACPI: Lid Switch [LID0]
>[    1.406326] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.408528] ACPI: Power Button [PWRB]
>[    1.410340] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.412128] ACPI: Sleep Button [SLPB]
>[    1.412203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.412245] ACPI: Power Button [PWRF]
>[    1.415176] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    1.415177] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.415772] [drm] Memory usable by graphics device = 4096M
>[    1.415774] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.415775] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.415776] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.415778] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.415778] fb: switching to inteldrmfb from EFI VGA
>[    1.428188] Console: switching to colour dummy device 80x25
>[    1.442548] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018
>[    1.442559] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.442560] [drm:intel_opregion_setup] SWSCI supported
>[    1.448554] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.448555] [drm:intel_opregion_setup] ASLE supported
>[    1.448595] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.448605] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.448608] [drm] Driver supports precise vblank timestamp query.
>[    1.448612] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.448614] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.448616] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.448618] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.448622] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.448625] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.448627] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.448630] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.448633] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.448635] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.448637] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.448640] [drm:parse_mipi] No MIPI BDB found
>[    1.448642] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.448645] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.448647] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.448648] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.448650] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.448652] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.448715] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.448720] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.448723] [drm:intel_display_power_get] enabling always-on
>[    1.448725] [drm:intel_display_power_get] enabling display
>[    1.448729] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.448779] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.448781] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.448783] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.448784] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.448786] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.448788] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.448789] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.448791] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.448793] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.448794] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.448796] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.448797] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.448799] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.448801] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.448802] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.448805] [drm:intel_modeset_init] 3 display pipes available.
>[    1.448821] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.449126] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.449176] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.449179] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.449182] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.449184] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.449187] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.449286] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.449293] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.449567] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.449737] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.461543] random: nonblocking pool is initialized
>[    1.472239] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.472281] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.472289] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.472327] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.477552] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.477555] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.477558] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    1.477560] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.477565] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[    1.477568] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.477570] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[    1.477573] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[    1.477576] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled
>[    1.477578] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled
>[    1.477580] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[    1.477583] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.477584] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.477586] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.477589] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.477591] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.477593] [drm:intel_dump_pipe_config] requested mode:
>[    1.477596] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.477597] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.477600] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.477602] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.477604] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.477606] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.477607] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.477610] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.477611] [drm:intel_dump_pipe_config] ips: 0
>[    1.477612] [drm:intel_dump_pipe_config] double wide: 0
>[    1.477615] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.477616] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.477617] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.477620] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.477622] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.477623] [drm:intel_dump_pipe_config] requested mode:
>[    1.477625] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.477627] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.477629] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.477632] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.477633] [drm:intel_dump_pipe_config] port clock: 0
>[    1.477634] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.477636] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.477638] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.477639] [drm:intel_dump_pipe_config] ips: 0
>[    1.477641] [drm:intel_dump_pipe_config] double wide: 0
>[    1.477643] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    1.477644] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.477646] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.477648] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.477650] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.477651] [drm:intel_dump_pipe_config] requested mode:
>[    1.477653] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.477655] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.477657] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.477659] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.477661] [drm:intel_dump_pipe_config] port clock: 0
>[    1.477662] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.477664] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.477666] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.477667] [drm:intel_dump_pipe_config] ips: 0
>[    1.477668] [drm:intel_dump_pipe_config] double wide: 0
>[    1.477674] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    1.477677] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    1.477680] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.477682] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    1.477684] [drm:check_crtc_state] [CRTC:5]
>[    1.477691] [drm:check_crtc_state] [CRTC:8]
>[    1.477693] [drm:check_crtc_state] [CRTC:11]
>[    1.477699] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.477702] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.477705] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.477708] [drm:intel_alloc_plane_obj] plane fb obj ffff8800aa9b2600
>[    1.477711] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.477713] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.480808] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.480810] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.480813] [drm:i915_gem_context_init] HW context support initialized
>[    1.480830] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.480914] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.480927] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.480996] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.481062] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.481254] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
>[    1.481257] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[    1.481264] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.481269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
>[    1.481272] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.481275] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.481277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1]
>[    1.481278] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.481283] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected
>[    1.481285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1]
>[    1.481287] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[    1.481442] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.481445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.481447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected
>[    1.481449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
>[    1.481451] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[    1.481604] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.481606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.481607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
>[    1.481609] [drm:drm_setup_crtcs] 
>[    1.481611] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.481612] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.481614] [drm:drm_enable_connectors] connector 24 enabled? no
>[    1.481615] [drm:drm_enable_connectors] connector 26 enabled? no
>[    1.481618] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14
>[    1.481619] [drm:intel_fb_initial_config] looking for preferred mode on connector 14
>[    1.481621] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080
>[    1.481623] [drm:intel_fb_initial_config] connector 23 not enabled, skipping
>[    1.481624] [drm:intel_fb_initial_config] connector 24 not enabled, skipping
>[    1.481626] [drm:intel_fb_initial_config] connector 26 not enabled, skipping
>[    1.481628] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[    1.481630] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.481632] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.481635] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.482985] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff8800aa9b3680
>[    1.483061] fbcon: inteldrmfb (fb0) is primary device
>[    1.483113] [drm:intel_crtc_cursor_set] cursor off
>[    1.483117] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    1.483120] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.483123] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.483126] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.483127] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.483129] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    1.483132] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.483135] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[    1.483138] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.483139] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[    1.483140] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[    1.483146] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.483147] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.483149] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.483150] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.483151] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.483152] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.483153] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.483155] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.483156] [drm:intel_dump_pipe_config] requested mode:
>[    1.483158] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.483159] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.483160] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.483162] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.483163] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.483164] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.483165] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.483166] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.483167] [drm:intel_dump_pipe_config] ips: 1
>[    1.483168] [drm:intel_dump_pipe_config] double wide: 0
>[    1.500533] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.500537] [drm:intel_edp_backlight_off] 
>[    1.516682] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.580522] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.701461] [drm:wait_panel_off] Wait for panel power off time
>[    1.701465] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.747720] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[    1.747721] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.747723] usb 1-1: Product: USB Optical Mouse
>[    1.747724] usb 1-1: Manufacturer: Logitech
>[    1.747813] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.749618] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input5
>[    1.749753] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[    1.756447] [drm:wait_panel_status] Wait complete
>[    1.756451] [drm:intel_update_fbc] no output, disabling
>[    1.756455] [drm:intel_display_power_put] disabling display
>[    1.756457] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.756470] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[    1.756477] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[    1.756478] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[    1.756480] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.756483] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.891392] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    1.902401] usb 1-5: new low-speed USB device number 3 using xhci_hcd
>[    2.071542] usb 1-5: New USB device found, idVendor=413c, idProduct=2107
>[    2.071544] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.071546] usb 1-5: Product: Dell USB Entry Keyboard
>[    2.071547] usb 1-5: Manufacturer: DELL
>[    2.071636] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.074690] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2107.0002/input/input6
>[    2.074782] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-5/input0
>[    2.302246] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.302248] [drm:wait_panel_status] Wait complete
>[    2.302251] [drm:wait_panel_on] Wait for panel power on
>[    2.302254] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.511167] [drm:wait_panel_status] Wait complete
>[    2.511169] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.511175] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.512249] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.512707] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.513465] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.513670] [drm:intel_edp_backlight_on] 
>[    2.513673] [drm:intel_panel_enable_backlight] pipe A
>[    2.513678] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.513680] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.533158] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    2.533161] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    2.533164] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    2.533166] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    2.533167] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.533169] [drm:check_crtc_state] [CRTC:5]
>[    2.533176] [drm:check_crtc_state] [CRTC:8]
>[    2.533177] [drm:check_crtc_state] [CRTC:11]
>[    2.533179] [drm:intel_crtc_cursor_set] cursor off
>[    2.533181] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.533183] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.533184] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.533185] [drm:intel_crtc_cursor_set] cursor off
>[    2.533186] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.533188] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.533189] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.533193] Console: switching to colour frame buffer device 240x67
>[    2.533200] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.533201] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.533203] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.540931] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.540969] i915 0000:00:02.0: registered panic notifier
>[    2.547638] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.548252] acpi device:16: registered as cooling_device9
>[    2.548386] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    2.548546] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.552750] dracut: Starting plymouth daemon
>[    2.560354] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.560357] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.560359] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570887] [drm:i915_gem_open] 
>[    2.570912] [drm:intel_crtc_cursor_set] cursor off
>[    2.570915] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.570919] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.570922] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570924] [drm:intel_crtc_cursor_set] cursor off
>[    2.570926] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.570928] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.570930] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570932] [drm:intel_crtc_cursor_set] cursor off
>[    2.570933] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.570935] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.570937] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570946] [drm:i915_gem_open] 
>[    2.570955] [drm:intel_crtc_cursor_set] cursor off
>[    2.570957] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.570959] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.570961] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570963] [drm:intel_crtc_cursor_set] cursor off
>[    2.570964] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.570966] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.570968] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570969] [drm:intel_crtc_cursor_set] cursor off
>[    2.570971] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.570973] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.570975] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.570980] [drm:i915_gem_open] 
>[    2.571247] [drm:intel_crtc_cursor_set] cursor off
>[    2.571252] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.571255] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.571258] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.571261] [drm:intel_crtc_cursor_set] cursor off
>[    2.571263] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.571267] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.571269] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.571272] [drm:intel_crtc_cursor_set] cursor off
>[    2.571274] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.571277] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.571280] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.571438] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.577040] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.577043] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.577045] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.637649] ACPI: AC Adapter [ADP1] (on-line)
>[    2.659110] ACPI: Battery Slot [BAT0] (battery present)
>[    2.659192] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.659320] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.671322] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.671542] [drm:intel_display_power_get] enabling display
>[    2.671546] [drm:hsw_set_power_well] Enabling power well
>[    2.671549] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.671654] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.672068] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.672259] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
>[    2.672443] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.675344] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.675422] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.691897] iTCO_vendor_support: vendor-support=0
>[    2.692096] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.692163] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.692453] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.699327] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.699330] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.699332] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.709057] EXT4-fs (sda2): recovery complete
>[    2.712785] ppdev: user-space parallel port driver
>[    2.713139] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.740253] dracut: Checking ext4: /dev/sda2
>[    2.742435] dracut: issuing e2fsck -a  /dev/sda2
>[    2.753119] dracut: /dev/sda2: clean, 690976/13598720 files, 22825186/54372608 blocks
>[    2.756179] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.767063] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.772613] dracut: Mounted root filesystem /dev/sda2
>[    2.785122] device-mapper: uevent: version 1.0.3
>[    2.787363] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.808936] dracut: Switching root
>[    2.874113] init: ureadahead main process (2710) terminated with status 5
>[    2.891052] Switched to clocksource tsc
>[    2.979720] systemd-udevd[2821]: starting version 204
>[    3.130154] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.130157] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.130160] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.150155] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.151276] systemd-udevd[3466]: could not open moddep file '/lib/modules/3.15.0-rc3_drm-intel-fixes_e95a2f_20140520+/modules.dep.bin'
>[    3.156897] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.158072] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.158077] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.158080] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.181277] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.181282] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.181285] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.222072] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.222076] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.222079] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.226148] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    3.246473] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.249112] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.264151] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.344414] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.347848] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.401029] init: failsafe main process (3721) killed by TERM signal
>[    3.416359] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    3.424519] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.429244] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.634221] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    3.703960] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    3.804740] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    3.874503] init: avahi-cups-reload main process (3865) terminated with status 1
>[    4.000913] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    4.000919] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.000922] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    4.016879] init: lightdm main process (3988) terminated with status 1
>[    4.019805] init: plymouth-ready (started) main process (3558) terminated with status 1
>[    4.458467] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.458476] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    6.573321] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    6.573326] e1000e 0000:00:19.0 eth3: 10/100 speed: disabling TSO
>[    8.778706] init: failsafe-x main process (4223) terminated with status 127
>[   63.669752] usb 1-1: USB disconnect, device number 2
>[   65.190616] usb 1-1: new low-speed USB device number 4 using xhci_hcd
>[   65.357976] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[   65.357979] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   65.357982] usb 1-1: Product: USB Optical Mouse
>[   65.357984] usb 1-1: Manufacturer: Logitech
>[   65.358072] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   65.359833] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0003/input/input9
>[   65.359970] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  125.343482] usb 1-1: USB disconnect, device number 4
>[  126.863420] usb 1-1: new low-speed USB device number 5 using xhci_hcd
>[  127.030712] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  127.030715] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  127.030717] usb 1-1: Product: USB Optical Mouse
>[  127.030719] usb 1-1: Manufacturer: Logitech
>[  127.030806] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  127.032587] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0004/input/input10
>[  127.032735] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  187.025218] usb 1-1: USB disconnect, device number 5
>[  188.545221] usb 1-1: new low-speed USB device number 6 using xhci_hcd
>[  188.712626] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  188.712629] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  188.712631] usb 1-1: Product: USB Optical Mouse
>[  188.712634] usb 1-1: Manufacturer: Logitech
>[  188.712722] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  188.714412] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0005/input/input11
>[  188.714578] hid-generic 0003:046D:C077.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  248.714946] usb 1-1: USB disconnect, device number 6
>[  250.235019] usb 1-1: new low-speed USB device number 7 using xhci_hcd
>[  250.402466] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  250.402469] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  250.402472] usb 1-1: Product: USB Optical Mouse
>[  250.402474] usb 1-1: Manufacturer: Logitech
>[  250.402561] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  250.404263] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0006/input/input12
>[  250.404407] hid-generic 0003:046D:C077.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  310.404677] usb 1-1: USB disconnect, device number 7
>[  311.924818] usb 1-1: new low-speed USB device number 8 using xhci_hcd
>[  312.092198] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  312.092202] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  312.092204] usb 1-1: Product: USB Optical Mouse
>[  312.092206] usb 1-1: Manufacturer: Logitech
>[  312.092294] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  312.094001] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0007/input/input13
>[  312.094142] hid-generic 0003:046D:C077.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  372.086411] usb 1-1: USB disconnect, device number 8
>[  373.606618] usb 1-1: new low-speed USB device number 9 using xhci_hcd
>[  373.774040] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  373.774043] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  373.774046] usb 1-1: Product: USB Optical Mouse
>[  373.774048] usb 1-1: Manufacturer: Logitech
>[  373.774136] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  373.775974] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0008/input/input14
>[  373.776114] hid-generic 0003:046D:C077.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  433.760148] usb 1-1: USB disconnect, device number 9
>[  435.280423] usb 1-1: new low-speed USB device number 10 using xhci_hcd
>[  435.447776] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  435.447779] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  435.447781] usb 1-1: Product: USB Optical Mouse
>[  435.447783] usb 1-1: Manufacturer: Logitech
>[  435.447870] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  435.449699] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0009/input/input15
>[  435.449837] hid-generic 0003:046D:C077.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  495.433884] usb 1-1: USB disconnect, device number 10
>[  496.954226] usb 1-1: new low-speed USB device number 11 using xhci_hcd
>[  497.121514] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  497.121517] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  497.121519] usb 1-1: Product: USB Optical Mouse
>[  497.121521] usb 1-1: Manufacturer: Logitech
>[  497.121608] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  497.123282] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.000A/input/input16
>[  497.123413] hid-generic 0003:046D:C077.000A: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  557.115618] usb 1-1: USB disconnect, device number 11
>[  558.636027] usb 1-1: new low-speed USB device number 12 using xhci_hcd
>[  558.803248] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  558.803251] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  558.803253] usb 1-1: Product: USB Optical Mouse
>[  558.803255] usb 1-1: Manufacturer: Logitech
>[  558.803343] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  558.805185] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.000B/input/input17
>[  558.805319] hid-generic 0003:046D:C077.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  600.905807] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  600.905813] [drm:intel_edp_backlight_off] 
>[  600.921803] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  600.921809] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  600.921961] [drm:intel_edp_panel_off] Turn eDP power off
>[  601.106734] [drm:wait_panel_off] Wait for panel power off time
>[  601.106737] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  601.161714] [drm:wait_panel_status] Wait complete
>[  601.161719] [drm:intel_update_fbc] no output, disabling
>[  601.161724] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[  601.161726] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[  601.161727] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  601.161729] [drm:check_crtc_state] [CRTC:5]
>[  601.161731] [drm:check_crtc_state] [CRTC:8]
>[  601.161733] [drm:check_crtc_state] [CRTC:11]
>[  618.805354] usb 1-1: USB disconnect, device number 12
>[  620.325826] usb 1-1: new low-speed USB device number 13 using xhci_hcd
>[  620.493164] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  620.493167] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  620.493169] usb 1-1: Product: USB Optical Mouse
>[  620.493171] usb 1-1: Manufacturer: Logitech
>[  620.493256] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  620.495108] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.000C/input/input18
>[  620.495262] hid-generic 0003:046D:C077.000C: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  680.495080] usb 1-1: USB disconnect, device number 13
>[  682.015625] usb 1-1: new low-speed USB device number 14 using xhci_hcd
>[  682.182894] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  682.182898] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  682.182900] usb 1-1: Product: USB Optical Mouse
>[  682.182902] usb 1-1: Manufacturer: Logitech
>[  682.182989] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  682.184833] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.000D/input/input19
>[  682.184981] hid-generic 0003:046D:C077.000D: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  742.184811] usb 1-1: USB disconnect, device number 14
>[  743.705423] usb 1-1: new low-speed USB device number 15 using xhci_hcd
>[  743.872713] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  743.872716] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  743.872718] usb 1-1: Product: USB Optical Mouse
>[  743.872720] usb 1-1: Manufacturer: Logitech
>[  743.872808] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  743.874678] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.000E/input/input20
>[  743.874817] hid-generic 0003:046D:C077.000E: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  803.874544] usb 1-1: USB disconnect, device number 15
>[  805.395222] usb 1-1: new low-speed USB device number 16 using xhci_hcd
>[  805.562556] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  805.562559] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  805.562561] usb 1-1: Product: USB Optical Mouse
>[  805.562563] usb 1-1: Manufacturer: Logitech
>[  805.562650] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  805.564417] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.000F/input/input21
>[  805.564558] hid-generic 0003:046D:C077.000F: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  816.789274] [drm:i915_gem_open] 
>[  816.789299] [drm:intel_crtc_cursor_set] cursor off
>[  816.789302] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  816.789306] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[  816.789309] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  816.789312] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  816.789315] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[  816.789319] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[  816.789321] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[  816.789323] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  816.789329] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[  816.789331] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[  816.789334] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[  816.789336] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[  816.789338] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  816.789339] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[  816.789342] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  816.789344] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[  816.789346] [drm:intel_dump_pipe_config] requested mode:
>[  816.789349] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  816.789351] [drm:intel_dump_pipe_config] adjusted mode:
>[  816.789354] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  816.789357] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[  816.789358] [drm:intel_dump_pipe_config] port clock: 270000
>[  816.789360] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  816.789362] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  816.789364] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  816.789365] [drm:intel_dump_pipe_config] ips: 1
>[  816.789367] [drm:intel_dump_pipe_config] double wide: 0
>[  816.789383] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[  816.789389] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
>[  816.789391] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[  816.789393] [drm:intel_edp_panel_on] Turn eDP power on
>[  816.789397] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  816.789401] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  816.789403] [drm:wait_panel_status] Wait complete
>[  816.789407] [drm:wait_panel_on] Wait for panel power on
>[  816.789410] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  816.998036] [drm:wait_panel_status] Wait complete
>[  816.998039] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  816.998046] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  816.999114] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  816.999563] [drm:intel_dp_start_link_train] clock recovery OK
>[  817.000312] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  817.000513] [drm:intel_edp_backlight_on] 
>[  817.000519] [drm:intel_panel_enable_backlight] pipe A
>[  817.000524] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  817.000527] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[  817.020025] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[  817.020030] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[  817.020034] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[  817.020037] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[  817.020039] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  817.020041] [drm:check_crtc_state] [CRTC:5]
>[  817.020048] [drm:check_crtc_state] [CRTC:8]
>[  817.020051] [drm:check_crtc_state] [CRTC:11]
>[  817.020055] [drm:intel_crtc_cursor_set] cursor off
>[  817.020056] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  817.020059] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  817.020061] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  817.020064] [drm:intel_crtc_cursor_set] cursor off
>[  817.020065] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  817.020067] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  817.020069] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  817.020087] [drm:i915_gem_open] 
>[  817.020380] [drm:i915_gem_open] 
>[  817.020393] [drm:i915_gem_open] 
>[  817.022448] [drm:intel_crtc_cursor_set] cursor off
>[  817.022452] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  817.022456] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  817.022459] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  817.022461] [drm:intel_crtc_cursor_set] cursor off
>[  817.022462] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  817.022464] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  817.022467] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  817.022468] [drm:intel_crtc_cursor_set] cursor off
>[  817.022470] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  817.022472] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  817.022474] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  820.004951] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  820.004961] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  834.364318] [drm:i915_gem_open] 
>[  834.364343] [drm:intel_crtc_cursor_set] cursor off
>[  834.364347] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  834.364351] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  834.364354] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  834.364356] [drm:intel_crtc_cursor_set] cursor off
>[  834.364358] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  834.364360] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  834.364363] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  834.364364] [drm:intel_crtc_cursor_set] cursor off
>[  834.364366] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  834.364368] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  834.364370] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  834.364379] [drm:i915_gem_open] 
>[  834.364707] [drm:i915_gem_open] 
>[  834.364723] [drm:i915_gem_open] 
>[  834.365182] [drm:intel_crtc_cursor_set] cursor off
>[  834.365187] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  834.365190] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  834.365193] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  834.365195] [drm:intel_crtc_cursor_set] cursor off
>[  834.365197] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  834.365199] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  834.365201] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  834.365203] [drm:intel_crtc_cursor_set] cursor off
>[  834.365204] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  834.365206] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  834.365208] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  846.724298] [drm:i915_gem_open] 
>[  846.724331] [drm:intel_crtc_cursor_set] cursor off
>[  846.724335] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  846.724343] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  846.724346] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  846.724349] [drm:intel_crtc_cursor_set] cursor off
>[  846.724354] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  846.724356] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  846.724358] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  846.724360] [drm:intel_crtc_cursor_set] cursor off
>[  846.724362] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  846.724368] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  846.724375] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  846.724386] [drm:i915_gem_open] 
>[  846.724716] [drm:i915_gem_open] 
>[  846.724731] [drm:i915_gem_open] 
>[  846.725143] [drm:intel_crtc_cursor_set] cursor off
>[  846.725147] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  846.725151] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  846.725153] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  846.725156] [drm:intel_crtc_cursor_set] cursor off
>[  846.725157] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  846.725159] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  846.725162] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  846.725163] [drm:intel_crtc_cursor_set] cursor off
>[  846.725165] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  846.725167] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  846.725169] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  865.564274] usb 1-1: USB disconnect, device number 16
>[  867.085020] usb 1-1: new low-speed USB device number 17 using xhci_hcd
>[  867.252285] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  867.252288] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  867.252290] usb 1-1: Product: USB Optical Mouse
>[  867.252292] usb 1-1: Manufacturer: Logitech
>[  867.252379] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  867.254170] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0010/input/input22
>[  867.254319] hid-generic 0003:046D:C077.0010: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  894.164176] [drm:i915_gem_open] 
>[  894.164202] [drm:intel_crtc_cursor_set] cursor off
>[  894.164205] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  894.164209] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  894.164212] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  894.164215] [drm:intel_crtc_cursor_set] cursor off
>[  894.164216] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  894.164219] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  894.164221] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  894.164222] [drm:intel_crtc_cursor_set] cursor off
>[  894.164224] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  894.164226] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  894.164228] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  894.164246] [drm:i915_gem_open] 
>[  894.164605] [drm:i915_gem_open] 
>[  894.164620] [drm:i915_gem_open] 
>[  894.165044] [drm:intel_crtc_cursor_set] cursor off
>[  894.165049] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  894.165052] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  894.165055] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  894.165058] [drm:intel_crtc_cursor_set] cursor off
>[  894.165060] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  894.165062] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  894.165064] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  894.165066] [drm:intel_crtc_cursor_set] cursor off
>[  894.165067] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  894.165069] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  894.165071] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  927.254005] usb 1-1: USB disconnect, device number 17
>[  928.774819] usb 1-1: new low-speed USB device number 18 using xhci_hcd
>[  928.942016] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  928.942019] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  928.942021] usb 1-1: Product: USB Optical Mouse
>[  928.942023] usb 1-1: Manufacturer: Logitech
>[  928.942113] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  928.943898] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0011/input/input23
>[  928.944035] hid-generic 0003:046D:C077.0011: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[  983.226151] [drm:i915_gem_open] 
>[  983.226177] [drm:intel_crtc_cursor_set] cursor off
>[  983.226181] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  983.226192] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  983.226199] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  983.226207] [drm:intel_crtc_cursor_set] cursor off
>[  983.226210] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  983.226213] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  983.226216] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  983.226218] [drm:intel_crtc_cursor_set] cursor off
>[  983.226221] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  983.226224] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  983.226227] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  983.226242] [drm:i915_gem_open] 
>[  983.226596] [drm:i915_gem_open] 
>[  983.226607] [drm:i915_gem_open] 
>[  983.227004] [drm:intel_crtc_cursor_set] cursor off
>[  983.227007] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[  983.227009] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  983.227012] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  983.227014] [drm:intel_crtc_cursor_set] cursor off
>[  983.227015] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  983.227017] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  983.227020] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  983.227021] [drm:intel_crtc_cursor_set] cursor off
>[  983.227023] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  983.227025] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  983.227027] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  988.927742] usb 1-1: USB disconnect, device number 18
>[  990.447623] usb 1-1: new low-speed USB device number 19 using xhci_hcd
>[  990.614972] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[  990.614975] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  990.614977] usb 1-1: Product: USB Optical Mouse
>[  990.614980] usb 1-1: Manufacturer: Logitech
>[  990.615067] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  990.616838] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0012/input/input24
>[  990.616982] hid-generic 0003:046D:C077.0012: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[ 1050.617473] usb 1-1: USB disconnect, device number 19
>[ 1052.137422] usb 1-1: new low-speed USB device number 20 using xhci_hcd
>[ 1052.304703] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[ 1052.304707] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1052.304709] usb 1-1: Product: USB Optical Mouse
>[ 1052.304711] usb 1-1: Manufacturer: Logitech
>[ 1052.304798] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[ 1052.306477] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0013/input/input25
>[ 1052.306607] hid-generic 0003:046D:C077.0013: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[ 1103.867951] [drm:i915_gem_open] 
>[ 1103.867976] [drm:intel_crtc_cursor_set] cursor off
>[ 1103.867980] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[ 1103.867983] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[ 1103.867986] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1103.867988] [drm:intel_crtc_cursor_set] cursor off
>[ 1103.867990] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[ 1103.867992] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 1103.867995] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1103.867996] [drm:intel_crtc_cursor_set] cursor off
>[ 1103.867998] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[ 1103.868000] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[ 1103.868002] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1103.868011] [drm:i915_gem_open] 
>[ 1103.868346] [drm:i915_gem_open] 
>[ 1103.868363] [drm:i915_gem_open] 
>[ 1103.868792] [drm:intel_crtc_cursor_set] cursor off
>[ 1103.868797] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[ 1103.868801] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[ 1103.868803] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1103.868806] [drm:intel_crtc_cursor_set] cursor off
>[ 1103.868807] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[ 1103.868810] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 1103.868812] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1103.868814] [drm:intel_crtc_cursor_set] cursor off
>[ 1103.868815] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[ 1103.868817] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[ 1103.868819] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1112.291210] usb 1-1: USB disconnect, device number 20
>[ 1113.811225] usb 1-1: new low-speed USB device number 21 using xhci_hcd
>[ 1113.978619] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[ 1113.978623] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1113.978625] usb 1-1: Product: USB Optical Mouse
>[ 1113.978627] usb 1-1: Manufacturer: Logitech
>[ 1113.978711] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[ 1113.980397] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0014/input/input26
>[ 1113.980559] hid-generic 0003:046D:C077.0014: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[ 1169.834670] [drm:i915_gem_open] 
>[ 1169.834695] [drm:intel_crtc_cursor_set] cursor off
>[ 1169.834698] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[ 1169.834703] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[ 1169.834705] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1169.834708] [drm:intel_crtc_cursor_set] cursor off
>[ 1169.834710] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[ 1169.834712] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 1169.834714] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1169.834716] [drm:intel_crtc_cursor_set] cursor off
>[ 1169.834717] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[ 1169.834719] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[ 1169.834721] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1169.834731] [drm:i915_gem_open] 
>[ 1169.835066] [drm:i915_gem_open] 
>[ 1169.835083] [drm:i915_gem_open] 
>[ 1169.835471] [drm:intel_crtc_cursor_set] cursor off
>[ 1169.835476] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[ 1169.835480] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[ 1169.835482] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1169.835485] [drm:intel_crtc_cursor_set] cursor off
>[ 1169.835486] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[ 1169.835489] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 1169.835491] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1169.835492] [drm:intel_crtc_cursor_set] cursor off
>[ 1169.835494] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[ 1169.835496] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[ 1169.835498] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1173.972945] usb 1-1: USB disconnect, device number 21
>[ 1175.494027] usb 1-1: new low-speed USB device number 22 using xhci_hcd
>[ 1175.661462] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[ 1175.661467] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1175.661469] usb 1-1: Product: USB Optical Mouse
>[ 1175.661471] usb 1-1: Manufacturer: Logitech
>[ 1175.661557] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[ 1175.663251] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0015/input/input27
>[ 1175.663412] hid-generic 0003:046D:C077.0015: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[ 1221.441167] [drm:i915_gem_open] 
>[ 1221.441192] [drm:intel_crtc_cursor_set] cursor off
>[ 1221.441196] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[ 1221.441200] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[ 1221.441203] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1221.441205] [drm:intel_crtc_cursor_set] cursor off
>[ 1221.441207] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[ 1221.441209] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 1221.441211] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1221.441213] [drm:intel_crtc_cursor_set] cursor off
>[ 1221.441215] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[ 1221.441217] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[ 1221.441219] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1221.441228] [drm:i915_gem_open] 
>[ 1221.441561] [drm:i915_gem_open] 
>[ 1221.441578] [drm:i915_gem_open] 
>[ 1221.442012] [drm:intel_crtc_cursor_set] cursor off
>[ 1221.442016] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[ 1221.442019] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[ 1221.442022] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1221.442025] [drm:intel_crtc_cursor_set] cursor off
>[ 1221.442026] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[ 1221.442028] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 1221.442031] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1221.442032] [drm:intel_crtc_cursor_set] cursor off
>[ 1221.442034] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[ 1221.442036] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[ 1221.442038] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[ 1235.646680] usb 1-1: USB disconnect, device number 22
>[ 1237.166829] usb 1-1: new low-speed USB device number 23 using xhci_hcd
>[ 1237.334205] usb 1-1: New USB device found, idVendor=046d, idProduct=c077
>[ 1237.334208] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 1237.334210] usb 1-1: Product: USB Optical Mouse
>[ 1237.334212] usb 1-1: Manufacturer: Logitech
>[ 1237.334299] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[ 1237.336001] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0016/input/input28
>[ 1237.336161] hid-generic 0003:046D:C077.0016: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0

Actions: View

Attachments on bug 78946: 99389

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.