Attachment 99459 Details for Bug 77869 – dmesg

dmesg

pm_rps.dmesg (text/plain), 83.00 KB, created by Guo Jinxian on 2014-05-21 01:45:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-05-21 01:45:09 UTC

Size: 83.00 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2810 SMP Tue May 20 11:24:51 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0xcccccccc
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009dcdffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000009dce0000-0x000000009dcfdfff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000009dcfe000-0x00000000aaf4dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE
>[    0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE
>[    0.000000] BRK [0x0323f000, 0x0323ffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03240000, 0x03240fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x9dcdffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0x9dbfffff] page 2M
>[    0.000000]  [mem 0x9dc00000-0x9dcdffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x9dcfe000-0xaaf4dfff]
>[    0.000000]  [mem 0x9dcfe000-0x9ddfffff] page 4k
>[    0.000000]  [mem 0x9de00000-0xaadfffff] page 2M
>[    0.000000]  [mem 0xaae00000-0xaaf4dfff] page 4k
>[    0.000000] BRK [0x03241000, 0x03241fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x03242000, 0x03242fff] PGTABLE
>[    0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AB7C9188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x000000009DCE0000 01D795 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AB799000 000040
>[    0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AB79C000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CF000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CE000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CD000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AB7CC000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7CB000 00053B (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CA000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C2000 006F14 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AB7C1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AB7BF000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AB7BE000 000138 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AB7BD000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AB7BC000 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AB7BB000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x9dcdffff]
>[    0.000000]   node   0: [mem 0x9dcfe000-0xaaf4dfff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1025770
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10878 pages used for memmap
>[    0.000000]   DMA32 zone: 696141 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9dce0000-0x9dcfdfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74752 r8192 d23552 u262144
>[    0.000000] pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009714
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0xcccccccc
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3935340K/4103080K available (7365K kernel code, 723K rwdata, 3568K rodata, 22752K init, 600K bss, 167740K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.981 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.96 BogoMIPS (lpj=1795981)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000016] ACPI: Core revision 20140214
>[    0.030643] ACPI: All ACPI Tables successfully acquired
>[    0.030671] Security Framework initialized
>[    0.030972] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.031840] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.032234] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032243] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032466] CPU: Physical Processor ID: 0
>[    0.032469] CPU: Processor Core ID: 0
>[    0.033681] mce: CPU supports 7 MCE banks
>[    0.033693] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.033703] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>tlb_flushall_shift: 6
>[    0.034151] Freeing SMP alternatives memory: 32K (ffffffff8319e000 - ffffffff831a6000)
>[    0.034810] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.044822] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.044833] TSC deadline timer enabled
>[    0.044841] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.044850] ... version:                3
>[    0.044852] ... bit width:              48
>[    0.044854] ... generic registers:      4
>[    0.044857] ... value mask:             0000ffffffffffff
>[    0.044859] ... max period:             0000ffffffffffff
>[    0.044861] ... fixed-purpose events:   3
>[    0.044863] ... event mask:             000000070000000f
>[    0.045102] x86: Booting SMP configuration:
>[    0.045105] .... node  #0, CPUs:      #1
>[    0.057471] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.059592]  #2
>[    0.072172] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.086663]  #3
>[    0.086663] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.088738] x86: Booted up 1 node, 4 CPUs
>[    0.088745] smpboot: Total of 4 processors activated (14367.84 BogoMIPS)
>[    0.093809] devtmpfs: initialized
>[    0.094209] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes)
>[    0.094330] xor: automatically using best checksumming function:
>[    0.103569]    avx       : 17204.000 MB/sec
>[    0.103597] RTC time:  1:17:31, date: 01/10/01
>[    0.103644] NET: Registered protocol family 16
>[    0.103890] cpuidle: using governor ladder
>[    0.103893] cpuidle: using governor menu
>[    0.104031] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.104034] ACPI: bus type PCI registered
>[    0.104068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.104072] PCI: not using MMCONFIG
>[    0.104075] PCI: Using configuration type 1 for base access
>[    0.124609] raid6: sse2x1    5609 MB/s
>[    0.141623] raid6: sse2x2    6695 MB/s
>[    0.158647] raid6: sse2x4    7960 MB/s
>[    0.175661] raid6: avx2x1   10832 MB/s
>[    0.192686] raid6: avx2x2   12308 MB/s
>[    0.209703] raid6: avx2x4   14414 MB/s
>[    0.209705] raid6: using algorithm avx2x4 (14414 MB/s)
>[    0.209708] raid6: using avx2x2 recovery algorithm
>[    0.209747] ACPI: Added _OSI(Module Device)
>[    0.209749] ACPI: Added _OSI(Processor Device)
>[    0.209752] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.209754] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.221938] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.255930] ACPI: SSDT 0x00000000AB57CA18 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.256874] ACPI: Dynamic OEM Table Load:
>[    0.256878] ACPI: SSDT 0x0000000000000000 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.263102] ACPI: SSDT 0x00000000AB57D818 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.264334] ACPI: Dynamic OEM Table Load:
>[    0.264337] ACPI: SSDT 0x0000000000000000 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.268940] ACPI: SSDT 0x00000000AB57BD98 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.269891] ACPI: Dynamic OEM Table Load:
>[    0.269894] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.277259] ACPI: Interpreter enabled
>[    0.277269] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
>[    0.277279] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
>[    0.277304] ACPI: (supports S0 S3 S4 S5)
>[    0.277307] ACPI: Using IOAPIC for interrupt routing
>[    0.277331] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.279717] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.290628] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.291157] ACPI: Power Resource [PG00] (on)
>[    0.297203] ACPI: Power Resource [PG01] (on)
>[    0.305218] ACPI: Power Resource [PG02] (on)
>[    0.334891] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.336262] ACPI: Power Resource [FN00] (off)
>[    0.336344] ACPI: Power Resource [FN01] (off)
>[    0.336425] ACPI: Power Resource [FN02] (off)
>[    0.336504] ACPI: Power Resource [FN03] (off)
>[    0.336583] ACPI: Power Resource [FN04] (off)
>[    0.337705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.337714] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.338254] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.338866] PCI host bridge to bus 0000:00
>[    0.338870] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.338874] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.338877] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.338881] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.338884] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.338895] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.339159] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.339175] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.339183] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.339190] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.339439] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.339448] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.339717] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.339737] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.339799] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.340004] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.340056] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.340078] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.340151] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.340394] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.340412] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.340421] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.340429] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.340491] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.340690] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.340743] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.341089] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.341105] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.341113] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.341121] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.341129] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.341137] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.341145] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.341184] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.341412] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.341427] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.341448] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.341694] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.341723] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.342035] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.344041] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.344100] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.344156] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.344210] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.344264] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.344318] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.344371] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.344425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.344693] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.344911] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.345019] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.345024] vgaarb: loaded
>[    0.345026] vgaarb: bridge control possible 0000:00:02.0
>[    0.345110] SCSI subsystem initialized
>[    0.345164] libata version 3.00 loaded.
>[    0.345208] ACPI: bus type USB registered
>[    0.345242] usbcore: registered new interface driver usbfs
>[    0.345260] usbcore: registered new interface driver hub
>[    0.345294] usbcore: registered new device driver usb
>[    0.345330] pps_core: LinuxPPS API ver. 1 registered
>[    0.345333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.345341] PTP clock support registered
>[    0.345406] PCI: Using ACPI for IRQ routing
>[    0.351483] PCI: pci_cache_line_size set to 64 bytes
>[    0.351510] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.351512] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.351514] e820: reserve RAM buffer [mem 0x9dce0000-0x9fffffff]
>[    0.351516] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff]
>[    0.351518] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.351519] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.351628] NetLabel: Initializing
>[    0.351631] NetLabel:  domain hash size = 128
>[    0.351633] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.351647] NetLabel:  unlabeled traffic allowed by default
>[    0.351798] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.351807] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.353833] Switched to clocksource hpet
>[    0.353884] pnp: PnP ACPI init
>[    0.353895] ACPI: bus type PNP registered
>[    0.354199] system 00:00: [io  0x06a4] has been reserved
>[    0.354203] system 00:00: [io  0x06a0] has been reserved
>[    0.354207] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.354338] pnp 00:01: [dma 4]
>[    0.354365] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.354393] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.354508] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.354572] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.354576] system 00:04: [io  0xffff] has been reserved
>[    0.354582] system 00:04: [io  0xffff] has been reserved
>[    0.354585] system 00:04: [io  0xffff] has been reserved
>[    0.354588] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.354592] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.354596] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.354651] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.354696] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.354700] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.354837] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.354958] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.355557] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.355561] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.355565] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.355568] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.355572] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.355575] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.355579] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.355583] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.355700] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.355879] pnp 00:0b: unknown resource type 18 in _CRS
>[    0.355883] pnp 00:0b: can't evaluate _CRS: 1
>[    0.355919] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.356462] pnp 00:0c: unknown resource type 18 in _CRS
>[    0.356466] pnp 00:0c: can't evaluate _CRS: 1
>[    0.356506] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.356983] pnp 00:0d: unknown resource type 18 in _CRS
>[    0.356987] pnp 00:0d: can't evaluate _CRS: 1
>[    0.357033] pnp 00:0d: Plug and Play ACPI device, IDs INT3435 (active)
>[    0.357447] system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.357451] system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.357454] system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.357458] system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.357462] system 00:0e: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.357466] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.357469] system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.357473] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.357476] system 00:0e: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.357480] system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.357483] system 00:0e: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.357487] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.357782] system 00:0f: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.357787] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.357940] pnp: PnP ACPI: found 16 devices
>[    0.357942] ACPI: bus type PNP unregistered
>[    0.364897] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.364903] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.364905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.364908] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.364938] NET: Registered protocol family 2
>[    0.365117] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.365196] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.365266] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.365289] TCP: reno registered
>[    0.365298] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.365316] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.365365] NET: Registered protocol family 1
>[    0.365430] RPC: Registered named UNIX socket transport module.
>[    0.365433] RPC: Registered udp transport module.
>[    0.365435] RPC: Registered tcp transport module.
>[    0.365437] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.365446] pci 0000:00:02.0: Boot video device
>[    0.365538] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.365542] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.365633] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.365650] PCI: CLS 0 bytes, default 64
>[    0.881424] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.881433] software IO TLB [mem 0xa6f4e000-0xaaf4e000] (64MB) mapped at [ffff8800a6f4e000-ffff8800aaf4dfff]
>[    0.881587] Simple Boot Flag at 0x47 set to 0x80
>[    0.882358] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.882387] audit: initializing netlink subsys (disabled)
>[    0.882405] audit: type=2000 audit(979089451.837:1): initialized
>[    0.914813] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.916664] VFS: Disk quotas dquot_6.5.2
>[    0.916707] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.917424] NFS: Registering the id_resolver key type
>[    0.917440] Key type id_resolver registered
>[    0.917442] Key type id_legacy registered
>[    0.917447] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.917596] fuse init (API version 7.23)
>[    0.917709] msgmni has been set to 7686
>[    0.917930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.917936] io scheduler noop registered
>[    0.917938] io scheduler deadline registered
>[    0.917971] io scheduler cfq registered (default)
>[    0.918039] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.918089] efifb: probing for efifb
>[    0.918516] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010800000, using 8100k, total 8100k
>[    0.918520] efifb: mode is 1920x1080x32, linelength=7680, pages=2025
>[    0.918522] efifb: scrolling: redraw
>[    0.918525] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.925255] Console: switching to colour frame buffer device 240x67
>[    0.931553] fb0: EFI VGA frame buffer device
>[    0.931684] ACPI: Fan [FAN0] (off)
>[    0.931733] ACPI: Fan [FAN1] (off)
>[    0.931778] ACPI: Fan [FAN2] (off)
>[    0.931824] ACPI: Fan [FAN3] (off)
>[    0.931868] ACPI: Fan [FAN4] (off)
>[    0.932277] Monitor-Mwait will be used to enter C-1 state
>[    0.933704] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.933739] ACPI: Thermal Zone [TZ00] (39 C)
>[    0.934487] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.934520] ACPI: Thermal Zone [TZ01] (39 C)
>[    0.934587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.955292] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.955864] Non-volatile memory driver v1.3
>[    0.955890] Linux agpgart interface v0.103
>[    0.957264] brd: module loaded
>[    0.957389] Loading iSCSI transport class v2.0-870.
>[    0.957542] iscsi: registered transport (tcp)
>[    0.957645] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.957687] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.957788] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
>[    0.957863] iscsi: registered transport (qla4xxx)
>[    0.957902] QLogic iSCSI HBA Driver
>[    0.957947] DC390: clustering now enabled by default. If you get problems load
>[    0.957985]        with "disable_clustering=1" and report to maintainers
>[    0.958045] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.958109] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.958149] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.958213] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.958263] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.958381] SCSI Media Changer driver v0.25 
>[    0.958429] ahci 0000:00:1f.2: version 3.0
>[    0.958547] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    0.958586] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    0.958648] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.959133] scsi0 : ahci
>[    0.959241] scsi1 : ahci
>[    0.959344] scsi2 : ahci
>[    0.959474] scsi3 : ahci
>[    0.960888] ata1: DUMMY
>[    0.962222] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    0.963586] ata3: DUMMY
>[    0.964936] ata4: DUMMY
>[    0.967297] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.968720] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.970165] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.971663] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.973077] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.974482] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.975906] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.977308] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.978868] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.980307] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.145220] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.146651] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
>[    1.148095] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.149580] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.151040] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.152494] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.153973] usbcore: registered new interface driver catc
>[    1.155419] usbcore: registered new interface driver kaweth
>[    1.156837] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.158278] usbcore: registered new interface driver pegasus
>[    1.159726] usbcore: registered new interface driver rtl8150
>[    1.161147] usbcore: registered new interface driver asix
>[    1.162555] usbcore: registered new interface driver ax88179_178a
>[    1.163957] usbcore: registered new interface driver cdc_ether
>[    1.165357] usbcore: registered new interface driver dm9601
>[    1.166771] usbcore: registered new interface driver gl620a
>[    1.168176] usbcore: registered new interface driver net1080
>[    1.169591] usbcore: registered new interface driver plusb
>[    1.170979] usbcore: registered new interface driver rndis_host
>[    1.172358] usbcore: registered new interface driver cdc_subset
>[    1.173729] usbcore: registered new interface driver zaurus
>[    1.175078] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.176426] usbcore: registered new interface driver cdc_ncm
>[    1.177816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.179130] ehci-pci: EHCI PCI platform driver
>[    1.180470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.181808] ohci-pci: OHCI PCI platform driver
>[    1.183144] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.184593] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.185939] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    1.187289] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.188645] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.190039] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.190056] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.190116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.191441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.192754] usb usb1: Product: xHCI Host Controller
>[    1.194052] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ xhci_hcd
>[    1.195373] usb usb1: SerialNumber: 0000:00:14.0
>[    1.196804] hub 1-0:1.0: USB hub found
>[    1.198125] hub 1-0:1.0: 11 ports detected
>[    1.202869] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.204205] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.205543] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.206841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.208127] usb usb2: Product: xHCI Host Controller
>[    1.209399] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ xhci_hcd
>[    1.210689] usb usb2: SerialNumber: 0000:00:14.0
>[    1.212101] hub 2-0:1.0: USB hub found
>[    1.213421] hub 2-0:1.0: 4 ports detected
>[    1.216153] usbcore: registered new interface driver usb-storage
>[    1.217553] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.218897] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.220675] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.222142] mousedev: PS/2 mouse device common for all mice
>[    1.223616] rtc_cmos 00:05: RTC can wake from S4
>[    1.225121] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.226489] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.227855] i2c /dev entries driver
>[    1.229214] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.230748] usbcore: registered new interface driver usbhid
>[    1.232081] usbhid: USB HID core driver
>[    1.233466] TCP: cubic registered
>[    1.234768] Initializing XFRM netlink socket
>[    1.236075] NET: Registered protocol family 17
>[    1.237389] Key type dns_resolver registered
>[    1.239098] registered taskstats version 1
>[    1.240899] Btrfs loaded
>[    1.242444]   Magic number: 1:540:255
>[    1.243824] PM: Hibernation image not present or could not be loaded.
>[    1.243842] Warning: unable to open an initial console.
>[    1.262429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.271538] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.284100] ata2.00: ATA-9: INTEL SSDSC2CW480A3, 400i, max UDMA/133
>[    1.285388] ata2.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.293992] ata2.00: configured for UDMA/133
>[    1.295413] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW48 400i PQ: 0 ANSI: 5
>[    1.296988] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
>[    1.297011] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.299837] sd 1:0:0:0: [sda] Write Protect is off
>[    1.301242] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.301256] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.303559]  sda: sda1 sda2 sda3 sda4 sda5
>[    1.305318] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.311272] Freeing unused kernel memory: 22752K (ffffffff81b66000 - ffffffff8319e000)
>[    1.348831] dracut: dracut-018-35.git20120510.fc17
>[    1.379348] udevd[1406]: starting version 182
>[    1.396307] [drm] Initialized drm 1.1.0 20060810
>[    1.399405] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.403559] ACPI: Lid Switch [LID0]
>[    1.406221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.408073] ACPI: Power Button [PWRB]
>[    1.409878] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.411730] ACPI: Sleep Button [SLPB]
>[    1.411813] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.412000] ACPI: Power Button [PWRF]
>[    1.415052] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    1.415052] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.415551] [drm] Memory usable by graphics device = 4096M
>[    1.415552] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.415553] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.415554] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.415556] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.415557] fb: switching to inteldrmfb from EFI VGA
>[    1.427151] Console: switching to colour dummy device 80x25
>[    1.441416] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018
>[    1.441425] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.441426] [drm:intel_opregion_setup] SWSCI supported
>[    1.446474] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.446475] [drm:intel_opregion_setup] ASLE supported
>[    1.446556] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.446570] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.446574] [drm] Driver supports precise vblank timestamp query.
>[    1.446577] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.446579] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.446582] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.446584] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.446586] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.446589] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.446592] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.446594] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.446597] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.446599] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.446602] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.446604] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.446606] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.446608] [drm:parse_mipi] No MIPI config BDB found
>[    1.446611] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.446613] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.446615] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.446617] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.446619] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.446620] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.446691] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.446696] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.446699] [drm:intel_display_power_get] enabling always-on
>[    1.446700] [drm:intel_display_power_get] enabling display
>[    1.446704] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.446764] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.446765] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.446767] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.446769] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.446771] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.446772] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.446774] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.446776] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.446777] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.446779] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.446781] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.446782] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.446784] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.446786] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.446787] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.446789] [drm:intel_modeset_init] 3 display pipes available.
>[    1.446806] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.447112] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.447167] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.447170] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.447173] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.447176] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.447179] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.447283] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.447290] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.447556] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    1.447715] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[    1.447725] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.460829] random: nonblocking pool is initialized
>[    1.467477] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.467479] [drm] VBT doesn't support DRRS
>[    1.467517] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.467530] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.467578] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.473468] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.473471] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.473473] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    1.473476] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.473481] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[    1.473483] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
>[    1.473485] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[    1.473488] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[    1.473490] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:DP-1] hw state readout: disabled
>[    1.473493] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:HDMI-A-1] hw state readout: disabled
>[    1.473495] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-2] hw state readout: disabled
>[    1.473497] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.473499] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.473501] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.473503] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.473505] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.473507] [drm:intel_dump_pipe_config] requested mode:
>[    1.473510] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.473511] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.473514] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.473517] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.473518] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.473520] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.473522] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.473524] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.473526] [drm:intel_dump_pipe_config] ips: 0
>[    1.473527] [drm:intel_dump_pipe_config] double wide: 0
>[    1.473529] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.473531] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.473532] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.473534] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.473536] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.473538] [drm:intel_dump_pipe_config] requested mode:
>[    1.473540] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.473541] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.473544] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.473546] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.473547] [drm:intel_dump_pipe_config] port clock: 0
>[    1.473549] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.473551] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.473553] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.473554] [drm:intel_dump_pipe_config] ips: 0
>[    1.473555] [drm:intel_dump_pipe_config] double wide: 0
>[    1.473557] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    1.473559] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.473560] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.473562] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.473564] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.473565] [drm:intel_dump_pipe_config] requested mode:
>[    1.473568] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.473569] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.473571] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.473574] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.473575] [drm:intel_dump_pipe_config] port clock: 0
>[    1.473577] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.473578] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.473580] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.473581] [drm:intel_dump_pipe_config] ips: 0
>[    1.473583] [drm:intel_dump_pipe_config] double wide: 0
>[    1.473589] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    1.473592] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    1.473594] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[    1.473596] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.473598] [drm:check_crtc_state] [CRTC:5]
>[    1.473605] [drm:check_crtc_state] [CRTC:8]
>[    1.473607] [drm:check_crtc_state] [CRTC:11]
>[    1.473613] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.473615] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.473620] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.473624] [drm:intel_alloc_plane_obj] plane fb obj ffff8800a6970000
>[    1.473627] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.473629] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.476717] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.476719] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.476722] [drm:i915_gem_context_init] HW context support initialized
>[    1.476740] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.476819] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.476824] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.476888] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.476945] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.477179] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[    1.477181] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[    1.477358] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    1.477524] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.477533] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.477537] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[    1.477541] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.477543] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[    1.477545] [drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[    1.477550] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected
>[    1.477551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[    1.477553] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[    1.477706] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.477708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.477710] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[    1.477711] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.477713] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.477871] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.477872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.477874] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.477876] [drm:drm_setup_crtcs] 
>[    1.477878] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.477879] [drm:drm_enable_connectors] connector 22 enabled? no
>[    1.477881] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.477882] [drm:drm_enable_connectors] connector 25 enabled? no
>[    1.477885] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.477886] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    1.477889] [drm:intel_fb_initial_config] connector eDP-1 on pipe 65 [CRTC:5]: 1920x1080
>[    1.477890] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.477892] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.477893] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.477895] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[    1.477897] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.477899] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.477906] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.479237] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff880002ae4000
>[    1.479313] fbcon: inteldrmfb (fb0) is primary device
>[    1.479364] [drm:intel_crtc_cursor_set] cursor off
>[    1.479367] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    1.479369] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.479373] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.479376] [drm:drm_mode_debug_printmodeline] Modeline 27:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.479377] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.479379] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    1.479382] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.479384] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[    1.479387] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.479388] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[    1.479389] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[    1.479396] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.479397] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.479399] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.479401] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.479401] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.479402] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.479404] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.479406] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.479407] [drm:intel_dump_pipe_config] requested mode:
>[    1.479409] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.479410] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.479411] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.479413] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.479414] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.479415] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.479416] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.479418] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.479419] [drm:intel_dump_pipe_config] ips: 1
>[    1.479420] [drm:intel_dump_pipe_config] double wide: 0
>[    1.491454] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.491460] [drm:intel_edp_backlight_off] 
>[    1.507597] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.555448] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.692381] [drm:wait_panel_off] Wait for panel power off time
>[    1.692385] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000
>[    1.722722] usb 1-1: New USB device found, idVendor=046d, idProduct=c05b
>[    1.722723] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.722725] usb 1-1: Product: USB Optical Mouse
>[    1.722726] usb 1-1: Manufacturer: Logitech
>[    1.722813] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.724803] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05B.0001/input/input5
>[    1.724928] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[    1.747357] [drm:wait_panel_status] Wait complete
>[    1.747361] [drm:intel_update_fbc] no output, disabling
>[    1.747363] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    1.747367] [drm:intel_display_power_put] disabling display
>[    1.747368] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.747380] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[    1.747385] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.747388] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.877331] usb 1-2: new low-speed USB device number 3 using xhci_hcd
>[    1.882320] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    2.049393] usb 1-2: New USB device found, idVendor=04ca, idProduct=0027
>[    2.049394] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.049396] usb 1-2: Product: USB Multimedia Keyboard
>[    2.049397] usb 1-2: Manufacturer: Lite-On Technology Corp.
>[    2.049480] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
>[    2.049484] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.053197] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04CA:0027.0002/input/input6
>[    2.053307] hid-generic 0003:04CA:0027.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:14.0-2/input0
>[    2.060870] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04CA:0027.0003/input/input7
>[    2.061018] hid-generic 0003:04CA:0027.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:14.0-2/input1
>[    2.213209] usb 1-6: new high-speed USB device number 4 using xhci_hcd
>[    2.293167] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.293169] [drm:wait_panel_status] Wait complete
>[    2.293172] [drm:wait_panel_on] Wait for panel power on
>[    2.293175] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.398272] usb 1-6: New USB device found, idVendor=0b95, idProduct=7720
>[    2.398274] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.398275] usb 1-6: Product: AX88772 
>[    2.398276] usb 1-6: SerialNumber: 00C767
>[    2.502087] [drm:wait_panel_status] Wait complete
>[    2.502090] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.502096] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.503155] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.503602] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.504040] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.504790] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.504990] [drm:intel_edp_backlight_on] 
>[    2.504993] [drm:intel_panel_enable_backlight] pipe A
>[    2.504998] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.505000] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.524077] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    2.524078] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.524081] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    2.524084] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    2.524086] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[    2.524087] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    2.524088] [drm:check_crtc_state] [CRTC:5]
>[    2.524095] [drm:check_crtc_state] [CRTC:8]
>[    2.524096] [drm:check_crtc_state] [CRTC:11]
>[    2.524098] [drm:intel_crtc_cursor_set] cursor off
>[    2.524099] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.524101] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.524103] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.524104] [drm:intel_crtc_cursor_set] cursor off
>[    2.524105] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.524106] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.524107] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.524111] Console: switching to colour frame buffer device 240x67
>[    2.524118] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.524120] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.524121] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.531987] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.532021] i915 0000:00:02.0: registered panic notifier
>[    2.538566] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.539176] acpi device:16: registered as cooling_device9
>[    2.539359] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
>[    2.539555] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.701551] asix 1-6:1.0 eth1: register 'asix' at usb-0000:00:14.0-6, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:8b:d4
>[    2.706208] dracut: Starting plymouth daemon
>[    2.713685] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.713688] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.713690] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723553] [drm:i915_gem_open] 
>[    2.723579] [drm:intel_crtc_cursor_set] cursor off
>[    2.723582] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.723586] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.723588] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723591] [drm:intel_crtc_cursor_set] cursor off
>[    2.723593] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.723595] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.723597] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723598] [drm:intel_crtc_cursor_set] cursor off
>[    2.723600] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.723602] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.723604] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723614] [drm:i915_gem_open] 
>[    2.723623] [drm:intel_crtc_cursor_set] cursor off
>[    2.723626] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.723628] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.723630] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723631] [drm:intel_crtc_cursor_set] cursor off
>[    2.723633] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.723634] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.723636] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723638] [drm:intel_crtc_cursor_set] cursor off
>[    2.723639] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.723641] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.723643] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723649] [drm:i915_gem_open] 
>[    2.723903] [drm:intel_crtc_cursor_set] cursor off
>[    2.723907] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.723911] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.723914] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723916] [drm:intel_crtc_cursor_set] cursor off
>[    2.723919] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.723921] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.723924] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723927] [drm:intel_crtc_cursor_set] cursor off
>[    2.723929] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.723932] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.723935] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.724113] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.729663] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.729667] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.729668] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.746007] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.796986] ACPI: AC Adapter [ADP1] (on-line)
>[    2.832032] ACPI: Battery Slot [BAT0] (battery present)
>[    2.832132] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.832292] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.843392] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.845423] input: PC Speaker as /devices/platform/pcspkr/input/input9
>[    2.850862] [drm:intel_display_power_get] enabling display
>[    2.850868] [drm:hsw_set_power_well] Enabling power well
>[    2.850909] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.850991] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.854881] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
>[    2.858586] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.864578] iTCO_vendor_support: vendor-support=0
>[    2.866292] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    2.868151] ppdev: user-space parallel port driver
>[    2.873758] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.877594] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.880535] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.884181] Switched to clocksource tsc
>[    2.888811] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    2.888816] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.888818] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.907623] dracut: Checking ext4: /dev/sda4
>[    2.909936] dracut: issuing e2fsck -a  /dev/sda4
>[    2.916918] dracut: /dev/sda4: clean, 293847/3276800 files, 6113423/13107200 blocks
>[    2.919544] dracut: Remounting /dev/sda4 with -o ro
>[    2.925397] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    2.931337] dracut: Mounted root filesystem /dev/sda4
>[    2.944745] device-mapper: uevent: version 1.0.3
>[    2.947050] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.976061] dracut: Switching root
>[    3.016068] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    3.028797] systemd[1]: Failed to insert module 'ipv6'
>[    3.031855] systemd[1]: Set hostname to <x-bdw09>.
>[    3.049302] LVM: Logical Volume autoactivation enabled.
>[    3.051498] LVM: Activation generator successfully completed.
>[    3.089480] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    3.091753] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    3.094017] systemd[1]: Starting Syslog Socket.
>[    3.098413] systemd[1]: Listening on Syslog Socket.
>[    3.101236] systemd[1]: Starting Replay Read-Ahead Data...
>[    3.105885] systemd[1]: Starting Collect Read-Ahead Data...
>[    3.107253] systemd-readahead[2786]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    3.112697] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    3.113775] systemd-readahead[2787]: Failed to create fanotify object: Function not implemented
>[    3.119694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    3.121894] systemd[1]: Starting Delayed Shutdown Socket.
>[    3.126084] systemd[1]: Listening on Delayed Shutdown Socket.
>[    3.128122] systemd[1]: Starting Encrypted Volumes.
>[    3.132179] systemd[1]: Reached target Encrypted Volumes.
>[    3.134235] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    3.138532] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    3.140657] systemd[1]: Starting Journal Socket.
>[    3.144873] systemd[1]: Listening on Journal Socket.
>[    3.146998] systemd[1]: Mounting Huge Pages File System...
>[    3.151467] systemd[1]: Starting Create static device nodes in /dev...
>[    3.155908] systemd[1]: Mounting Debug File System...
>[    3.160919] systemd[1]: Starting Journal Service...
>[    3.168251] systemd[1]: Started Journal Service.
>[    3.168760] systemd-journald[2796]: Vacuuming done, freed 0 bytes
>[    3.172430] systemd[1]: Starting udev Kernel Socket.
>[    3.176497] systemd[1]: Listening on udev Kernel Socket.
>[    3.178564] systemd[1]: Starting udev Control Socket.
>[    3.182445] systemd[1]: Listening on udev Control Socket.
>[    3.184376] systemd[1]: Starting udev Coldplug all Devices...
>[    3.188489] systemd[1]: Mounting POSIX Message Queue File System...
>[    3.192593] systemd[1]: Starting LVM2 metadata daemon socket.
>[    3.197644] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    3.199959] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    3.203810] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    3.205743] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    3.210024] systemd[1]: Expecting device dev-disk-by\x2duuid-e6db7738\x2df583\x2d46c8\x2daabd\x2db0e9707eda78.device...
>[    3.215096] systemd[1]: Mounting Temporary Directory...
>[    3.220576] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    3.222850] systemd[1]: Expecting device dev-disk-by\x2duuid-0C15\x2d74A5.device...
>[    3.226840] systemd[1]: Expecting device dev-disk-by\x2duuid-a291a9da\x2d8415\x2d427b\x2d8d61\x2df9604c4ff135.device...
>[    3.230948] systemd[1]: Expecting device dev-disk-by\x2duuid-e619ec80\x2d70b6\x2d4149\x2daccf\x2d496f9d901c09.device...
>[    3.237605] systemd[1]: Started Replay Read-Ahead Data.
>[    3.239799] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    3.244213] systemd[1]: Started Collect Read-Ahead Data.
>[    3.248600] systemd[1]: Mounted Huge Pages File System.
>[    3.253107] systemd[1]: Started Create static device nodes in /dev.
>[    3.257460] systemd[1]: Mounted Debug File System.
>[    3.262097] systemd[1]: Mounted POSIX Message Queue File System.
>[    3.266331] systemd[1]: Mounted Temporary Directory.
>[    3.268985] systemd[1]: Starting udev Kernel Device Manager...
>[    3.275031] systemd[1]: Starting Load legacy module configuration...
>[    3.277065] systemd-udevd[3596]: starting version 204
>[    3.286498] systemd[1]: Started File System Check on Root Device.
>[    3.290305] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    3.299168] systemd[1]: Started Set Up Additional Binary Formats.
>[    3.301862] systemd[1]: Starting Apply Kernel Variables...
>[    3.305065] EXT4-fs (sda4): re-mounted. Opts: (null)
>[    3.312357] systemd[1]: Starting Setup Virtual Console...
>[    3.318685] systemd[1]: Started Load Kernel Modules.
>[    3.320857] systemd[1]: Mounted Configuration File System.
>[    3.322873] systemd[1]: Mounting FUSE Control File System...
>[    3.332609] systemd[1]: Started udev Kernel Device Manager.
>[    3.337575] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    3.337578] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.337579] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.347885] systemd[1]: Mounted FUSE Control File System.
>[    3.350734] systemd[1]: Starting LVM2 metadata daemon...
>[    3.359842] systemd[1]: Started udev Coldplug all Devices.
>[    3.366031] systemd[1]: Started Load legacy module configuration.
>[    3.372196] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[    3.378145] systemd[1]: Started Remount Root and Kernel File Systems.
>[    3.384119] systemd[1]: Started Apply Kernel Variables.
>[    3.390574] systemd[1]: Started Setup Virtual Console.
>[    3.396923] systemd[1]: Started LVM2 metadata daemon.
>[    3.400535] systemd[1]: Starting Local File Systems (Pre).
>[    3.406507] systemd[1]: Reached target Local File Systems (Pre).
>[    3.410006] systemd[1]: Started Import network configuration from initramfs.
>[    3.413500] systemd[1]: Starting Configure read-only root support...
>[    3.421172] systemd[1]: Starting Show Plymouth Boot Screen...
>[    3.431716] systemd[1]: Starting Sound Card.
>[    3.439029] systemd[1]: Reached target Sound Card.
>[    3.447588] systemd-udevd[3818]: renamed network interface eth0 to enp0s25
>[    3.450789] systemd[1]: Started Configure read-only root support.
>[    3.454742] systemd[1]: Starting Load Random Seed...
>[    3.462799] systemd-udevd[3802]: renamed network interface eth1 to enp0s20u6
>[    3.492788] Adding 4079612k swap on /dev/sda3.  Priority:-1 extents:1 across:4079612k SS
>[    3.514348] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.522743] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    3.526800] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    3.540367] audit: type=1305 audit(979089454.496:2): audit_pid=3891 old=0 auid=4294967295 ses=4294967295 res=1
>[    4.457378] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.457387] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.575428] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    4.676323] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    6.392968] asix 1-6:1.0 enp0s20u6: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[    8.131358] systemd-journald[2796]: Received request to flush runtime journal from PID 1
>[    8.169934] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[    8.169939] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    8.169941] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157436] [drm:i915_gem_open] 
>[  246.157480] [drm:intel_crtc_cursor_set] cursor off
>[  246.157483] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[  246.157487] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  246.157490] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157492] [drm:intel_crtc_cursor_set] cursor off
>[  246.157494] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  246.157497] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  246.157499] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157500] [drm:intel_crtc_cursor_set] cursor off
>[  246.157502] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  246.157504] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  246.157506] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157516] [drm:i915_gem_open] 
>[  246.157525] [drm:intel_crtc_cursor_set] cursor off
>[  246.157527] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[  246.157529] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  246.157531] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157533] [drm:intel_crtc_cursor_set] cursor off
>[  246.157534] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  246.157536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  246.157538] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157540] [drm:intel_crtc_cursor_set] cursor off
>[  246.157541] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  246.157543] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  246.157545] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  246.157550] [drm:i915_gem_open] 
>[  246.157843] [drm:i915_gem_open] 
>[  246.157855] [drm:i915_gem_open] 
>[  284.539007] [drm:i915_ring_stop_set] Stopping rings 0x400000ff
>[  291.646061] [drm] stuck on render ring
>[  291.648356] [drm] GPU HANG: ecode 0:0xeeffef6b, in pm_rps [5637], reason: Ring hung, action: reset
>[  291.648412] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  291.648481] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  291.648547] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  291.648613] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  291.648675] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  291.648794] [drm:i915_error_work_func] resetting chip
>[  291.649206] [drm] Simulated gpu hang, resetting stop_rings
>[  291.649243] [drm:init_status_page] render ring hws offset: 0x007fb000
>[  291.649254] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[  291.649262] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[  291.649269] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[  291.649292] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  291.649294] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  291.649368] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680
>[  291.742161] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  306.935584] [drm:i915_gem_open] 
>[  306.935612] [drm:i915_gem_open] 
>[  342.755496] [drm:intel_crtc_cursor_set] cursor off
>[  342.755502] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0)
>[  342.755506] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  342.755509] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  342.755512] [drm:intel_crtc_cursor_set] cursor off
>[  342.755513] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  342.755515] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  342.755517] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[  342.755519] [drm:intel_crtc_cursor_set] cursor off
>[  342.755521] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[  342.755523] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[  342.755524] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]

Actions: View

Attachments on bug 77869: 97873 | 99459 | 106926

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.