Attachment 101026 Details for Bug 80010 – dmesg output with drm debug for vanilla 3.15 (screen black)

dmesg output with drm debug for vanilla 3.15 (screen black)

dmesg-bad.txt (text/plain), 103.09 KB, created by Thomas Rohwer on 2014-06-14 00:48:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Rohwer

Created: 2014-06-14 00:48:22 UTC

Size: 103.09 KB

patch

obsolete

>Linux version 3.15.0test+ (tr@humbur) (gcc version 4.8.3 (Debian 4.8.3-3) ) #34 SMP Sat Jun 14 02:01:50 CEST 2014
>Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0 root=/dev/sda1 ro quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>e820: BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
>BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable
>BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data
>BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS
>BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
>BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
>BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
>BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
>BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
>BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
>BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
>NX (Execute Disable) protection: active
>SMBIOS 2.4 present.
>DMI: LENOVO 6464W71/6464W71, BIOS 7LET51WW (1.21 ) 08/22/2007
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0C0000000 mask FC0000000 uncachable
>  1 base 13C000000 mask FFC000000 uncachable
>  2 base 000000000 mask F00000000 write-back
>  3 base 100000000 mask FC0000000 write-back
>  4 base 0BF700000 mask FFFF00000 uncachable
>  5 base 0BF800000 mask FFF800000 uncachable
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved
>e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
>Base memory trampoline at [ffff880000097000] 97000 size 24576
>init_memory_mapping: [mem 0x00000000-0x000fffff]
> [mem 0x00000000-0x000fffff] page 4k
>BRK [0x016f0000, 0x016f0fff] PGTABLE
>BRK [0x016f1000, 0x016f1fff] PGTABLE
>BRK [0x016f2000, 0x016f2fff] PGTABLE
>init_memory_mapping: [mem 0x13be00000-0x13bffffff]
> [mem 0x13be00000-0x13bffffff] page 2M
>BRK [0x016f3000, 0x016f3fff] PGTABLE
>init_memory_mapping: [mem 0x138000000-0x13bdfffff]
> [mem 0x138000000-0x13bdfffff] page 2M
>init_memory_mapping: [mem 0x100000000-0x137ffffff]
> [mem 0x100000000-0x137ffffff] page 2M
>init_memory_mapping: [mem 0x00100000-0xbf6affff]
> [mem 0x00100000-0x001fffff] page 4k
> [mem 0x00200000-0xbf5fffff] page 2M
> [mem 0xbf600000-0xbf6affff] page 4k
>ACPI: RSDP 0x00000000000F68D0 000024 (v02 LENOVO)
>ACPI: XSDT 0x00000000BF6BB8FD 000094 (v01 LENOVO TP-7L    00001210  LTP 00000000)
>ACPI: FACP 0x00000000BF6BBA00 0000F4 (v03 LENOVO TP-7L    00001210 LNVO 00000001)
>ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140214/tbfadt-603)
>ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20140214/tbfadt-603)
>ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20140214/tbfadt-634)
>ACPI: DSDT 0x00000000BF6BBE0C 00FD64 (v01 LENOVO TP-7L    00001210 MSFT 03000000)
>ACPI: FACS 0x00000000BF6E4000 000040
>ACPI: SSDT 0x00000000BF6BBBB4 000258 (v01 LENOVO TP-7L    00001210 MSFT 03000000)
>ACPI: ECDT 0x00000000BF6CBB70 000052 (v01 LENOVO TP-7L    00001210 LNVO 00000001)
>ACPI: TCPA 0x00000000BF6CBBC2 000032 (v02 LENOVO TP-7L    00001210 LNVO 00000001)
>ACPI: APIC 0x00000000BF6CBBF4 000068 (v01 LENOVO TP-7L    00001210 LNVO 00000001)
>ACPI: MCFG 0x00000000BF6CBC5C 00003C (v01 LENOVO TP-7L    00001210 LNVO 00000001)
>ACPI: HPET 0x00000000BF6CBC98 000038 (v01 LENOVO TP-7L    00001210 LNVO 00000001)
>ACPI: SLIC 0x00000000BF6CBDF0 000176 (v01 LENOVO TP-7L    00001210  LTP 00000000)
>ACPI: BOOT 0x00000000BF6CBF66 000028 (v01 LENOVO TP-7L    00001210  LTP 00000001)
>ACPI: ASF! 0x00000000BF6CBF8E 000072 (v16 LENOVO TP-7L    00001210 PTL  00000001)
>ACPI: SSDT 0x00000000BF6E26D9 00025F (v01 LENOVO TP-7L    00001210 INTL 20050513)
>ACPI: SSDT 0x00000000BF6E2938 0000A6 (v01 LENOVO TP-7L    00001210 INTL 20050513)
>ACPI: SSDT 0x00000000BF6E29DE 0004F7 (v01 LENOVO TP-7L    00001210 INTL 20050513)
>ACPI: SSDT 0x00000000BF6E2ED5 0001D8 (v01 LENOVO TP-7L    00001210 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad T61
>ACPI: Local APIC address 0xfee00000
> [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0
>Zone ranges:
>  DMA      [mem 0x00001000-0x00ffffff]
>  DMA32    [mem 0x01000000-0xffffffff]
>  Normal   [mem 0x100000000-0x13bffffff]
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x00001000-0x0009cfff]
>  node   0: [mem 0x00100000-0xbf6affff]
>  node   0: [mem 0x100000000-0x13bffffff]
>On node 0 totalpages: 1029708
>  DMA zone: 64 pages used for memmap
>  DMA zone: 21 pages reserved
>  DMA zone: 3996 pages, LIFO batch:0
>  DMA32 zone: 12187 pages used for memmap
>  DMA32 zone: 779952 pages, LIFO batch:31
>  Normal zone: 3840 pages used for memmap
>  Normal zone: 245760 pages, LIFO batch:31
>Reserving Intel graphics stolen memory at 0xbf800000-0xbfffffff
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>PM: Registered nosave memory: [mem 0xbf6b0000-0xbf6cbfff]
>PM: Registered nosave memory: [mem 0xbf6cc000-0xbf6fffff]
>PM: Registered nosave memory: [mem 0xbf700000-0xbfffffff]
>PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
>PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
>PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
>PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
>PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
>PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
>PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
>PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
>PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
>PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>e820: [mem 0xc0000000-0xefffffff] available for PCI devices
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff88013bc00000 s74624 r8192 d23680 u1048576
>pcpu-alloc: s74624 r8192 d23680 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1013596
>Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0 root=/dev/sda1 ro quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Memory: 3973592K/4118832K available (3477K kernel code, 334K rwdata, 1076K rodata, 692K init, 1484K bss, 145240K reserved)
>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	CONFIG_RCU_FANOUT set to non-default value of 32
>	RCU dyntick-idle grace-period acceleration is enabled.
>NR_IRQS:4352 nr_irqs:512 16
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>tsc: Fast TSC calibration failed
>tsc: PIT calibration matches HPET. 1 loops
>tsc: Detected 2194.495 MHz processor
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.99 BogoMIPS (lpj=8777980)
>pid_max: default: 32768 minimum: 301
>ACPI: Core revision 20140214
>ACPI: All ACPI Tables successfully acquired
>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>tlb_flushall_shift: -1
>Freeing SMP alternatives memory: 16K (ffffffff81577000 - ffffffff8157b000)
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (fam: 06, model: 0f, stepping: 0a)
>Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>perf_event_intel: PEBS disabled due to CPU errata
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>x86: Booting SMP configuration:
>.... node  #0, CPUs:      #1
>TSC synchronization [CPU#0 -> CPU#1]:
>Measured 399784 cycles TSC warp between CPUs, turning off TSC clock.
>tsc: Marking TSC unstable due to check_tsc_sync_source failed
>x86: Booted up 1 node, 2 CPUs
>smpboot: Total of 2 processors activated (8777.98 BogoMIPS)
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes)
>xor: measuring software checksum speed
>   prefetch64-sse:  9395.000 MB/sec
>   generic_sse:  8278.000 MB/sec
>xor: using function: prefetch64-sse (9395.000 MB/sec)
>NET: Registered protocol family 16
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type PCI registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>raid6: sse2x1    3684 MB/s
>raid6: sse2x2    3820 MB/s
>raid6: sse2x4    6544 MB/s
>raid6: using algorithm sse2x4 (6544 MB/s)
>raid6: using ssse3x2 recovery algorithm
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: Added _OSI(Linux)
>ACPI : EC: EC description table is found, configuring boot EC
>ACPI: SSDT 0x00000000BF6E1D72 0002C4 (v01 PmRef  Cpu0Ist  00000100 INTL 20050513)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000000000000 0002C4 (v01 PmRef  Cpu0Ist  00000100 INTL 20050513)
>ACPI: SSDT 0x00000000BF6E20BB 00061E (v01 PmRef  Cpu0Cst  00000100 INTL 20050513)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000000000000 00061E (v01 PmRef  Cpu0Cst  00000100 INTL 20050513)
>ACPI: SSDT 0x00000000BF6E1CAA 0000C8 (v01 PmRef  Cpu1Ist  00000100 INTL 20050513)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000000000000 0000C8 (v01 PmRef  Cpu1Ist  00000100 INTL 20050513)
>ACPI: SSDT 0x00000000BF6E2036 000085 (v01 PmRef  Cpu1Cst  00000100 INTL 20050513)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef  Cpu1Cst  00000100 INTL 20050513)
>ACPI: Interpreter enabled
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: Power Resource [PUBS] (on)
>acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
>acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
>acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
>acpi PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] (ignored)
>PCI: root bus 00: using default resources
>acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
>pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
>pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
>pci 0000:00:02.0: reg 0x10: [mem 0xf8100000-0xf81fffff 64bit]
>pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
>pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
>pci 0000:00:02.1: reg 0x10: [mem 0xf8200000-0xf82fffff 64bit]
>pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
>pci 0000:00:19.0: reg 0x10: [mem 0xfe000000-0xfe01ffff]
>pci 0000:00:19.0: reg 0x14: [mem 0xfe025000-0xfe025fff]
>pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: System wakeup disabled by ACPI
>pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>pci 0000:00:1a.0: reg 0x20: [io  0x1860-0x187f]
>pci 0000:00:1a.0: System wakeup disabled by ACPI
>pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
>pci 0000:00:1a.1: reg 0x20: [io  0x1880-0x189f]
>pci 0000:00:1a.1: System wakeup disabled by ACPI
>pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>pci 0000:00:1a.7: reg 0x10: [mem 0xfe226c00-0xfe226fff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: System wakeup disabled by ACPI
>pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
>pci 0000:00:1b.0: reg 0x10: [mem 0xfe020000-0xfe023fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: System wakeup disabled by ACPI
>pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: System wakeup disabled by ACPI
>pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: System wakeup disabled by ACPI
>pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: System wakeup disabled by ACPI
>pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: System wakeup disabled by ACPI
>pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: System wakeup disabled by ACPI
>pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>pci 0000:00:1d.0: reg 0x20: [io  0x18a0-0x18bf]
>pci 0000:00:1d.0: System wakeup disabled by ACPI
>pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>pci 0000:00:1d.1: reg 0x20: [io  0x18c0-0x18df]
>pci 0000:00:1d.1: System wakeup disabled by ACPI
>pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
>pci 0000:00:1d.2: reg 0x20: [io  0x18e0-0x18ff]
>pci 0000:00:1d.2: System wakeup disabled by ACPI
>pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>pci 0000:00:1d.7: reg 0x10: [mem 0xfe227000-0xfe2273ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: System wakeup disabled by ACPI
>pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>pci 0000:00:1e.0: System wakeup disabled by ACPI
>pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
>pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
>pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 0x20: [io  0x1c00-0x1c0f]
>pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
>pci 0000:00:1f.2: reg 0x10: [io  0x1c50-0x1c57]
>pci 0000:00:1f.2: reg 0x14: [io  0x1c44-0x1c47]
>pci 0000:00:1f.2: reg 0x18: [io  0x1c48-0x1c4f]
>pci 0000:00:1f.2: reg 0x1c: [io  0x1c40-0x1c43]
>pci 0000:00:1f.2: reg 0x20: [io  0x1c20-0x1c3f]
>pci 0000:00:1f.2: reg 0x24: [mem 0xfe226000-0xfe2267ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
>pci 0000:00:1f.3: reg 0x10: [mem 0xfe227400-0xfe2274ff]
>pci 0000:00:1f.3: reg 0x20: [io  0x1c60-0x1c7f]
>pci 0000:00:1c.0: PCI bridge to [bus 02]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfdffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
>pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
>pci 0000:03:00.0: reg 0x10: [mem 0xdf3fe000-0xdf3fffff 64bit]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PCI bridge to [bus 03]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xdc000000-0xdf3fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.2:   bridge window [mem 0xd8000000-0xd9ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
>pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.3:   bridge window [mem 0xd4000000-0xd5ffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
>pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd1ffffff]
>pci 0000:00:1c.4:   bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
>pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
>pci 0000:15:00.0: reg 0x10: [mem 0xf8300000-0xf8300fff]
>pci 0000:15:00.0: supports D1 D2
>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
>pci 0000:15:00.1: reg 0x10: [mem 0xf8301000-0xf83017ff]
>pci 0000:15:00.1: supports D1 D2
>pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
>pci 0000:15:00.2: reg 0x10: [mem 0xf8301800-0xf83018ff]
>pci 0000:15:00.2: supports D1 D2
>pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.3: [1180:0843] type 00 class 0x088000
>pci 0000:15:00.3: reg 0x10: [mem 0xf8301c00-0xf8301cff]
>pci 0000:15:00.3: supports D1 D2
>pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
>pci 0000:15:00.4: reg 0x10: [mem 0xf8302000-0xf83020ff]
>pci 0000:15:00.4: supports D1 D2
>pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
>pci 0000:15:00.5: reg 0x10: [mem 0xf8302400-0xf83024ff]
>pci 0000:15:00.5: supports D1 D2
>pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x7000-0xafff]
>pci 0000:00:1e.0:   bridge window [mem 0xf8300000-0xfbffffff]
>pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
>pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17
>pci_bus 0000:00: on NUMA node 0
>acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>ACPI: Enabled 3 GPEs in block 00 to 1F
>ACPI : EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>e820: reserve RAM buffer [mem 0xbf6b0000-0xbfffffff]
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switched to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type PNP registered
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
>system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
>system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>system 00:01: [io  0x164e-0x164f] has been reserved
>system 00:01: [io  0x1000-0x107f] could not be reserved
>system 00:01: [io  0x1180-0x11bf] has been reserved
>system 00:01: [io  0x0800-0x080f] has been reserved
>system 00:01: [io  0x15e0-0x15ef] has been reserved
>system 00:01: [io  0x1600-0x165f] could not be reserved
>system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
>pnp 00:09: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
>pnp: PnP ACPI: found 10 devices
>ACPI: bus type PNP unregistered
>pci 0000:00:1c.0: PCI bridge to [bus 02]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfdffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 03]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xdc000000-0xdf3fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.2:   bridge window [mem 0xd8000000-0xd9ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
>pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.3:   bridge window [mem 0xd4000000-0xd5ffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
>pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd1ffffff]
>pci 0000:00:1c.4:   bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
>pci 0000:15:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>pci 0000:15:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
>pci 0000:15:00.0: res[7]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>pci 0000:15:00.0: res[8]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>pci 0000:15:00.0: BAR 9: assigned [mem 0xf4000000-0xf7ffffff pref]
>pci 0000:15:00.0: BAR 10: assigned [mem 0xc0000000-0xc3ffffff]
>pci 0000:15:00.0: BAR 7: assigned [io  0x7000-0x70ff]
>pci 0000:15:00.0: BAR 8: assigned [io  0x7400-0x74ff]
>pci 0000:15:00.0: CardBus bridge to [bus 16-17]
>pci 0000:15:00.0:   bridge window [io  0x7000-0x70ff]
>pci 0000:15:00.0:   bridge window [io  0x7400-0x74ff]
>pci 0000:15:00.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
>pci 0000:15:00.0:   bridge window [mem 0xc0000000-0xc3ffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 15-18]
>pci 0000:00:1e.0:   bridge window [io  0x7000-0xafff]
>pci 0000:00:1e.0:   bridge window [mem 0xf8300000-0xfbffffff]
>pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
>pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
>pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
>pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
>pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
>pci_bus 0000:0d: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
>pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
>pci_bus 0000:15: resource 0 [io  0x7000-0xafff]
>pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
>pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
>pci_bus 0000:15: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:15: resource 5 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:16: resource 0 [io  0x7000-0x70ff]
>pci_bus 0000:16: resource 1 [io  0x7400-0x74ff]
>pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
>pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
>NET: Registered protocol family 2
>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP: reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>software IO TLB [mem 0xbb6b0000-0xbf6b0000] (64MB) mapped at [ffff8800bb6b0000-ffff8800bf6affff]
>Simple Boot Flag at 0x35 set to 0x1
>futex hash table entries: 512 (order: 3, 32768 bytes)
>msgmni has been set to 7760
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
>pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
>pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
>pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
>intel_idle: does not run on family 6 model 15
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: acpi_idle registered with cpuidle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (82 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (80 C)
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 45
>ata2: DUMMY
>ata3: DUMMY
>ata_piix 0000:00:1f.1: version 2.13
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
>i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>ata5: port disabled--ignoring
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>TCP: cubic registered
>NET: Registered protocol family 17
>Btrfs loaded
>rtc_cmos 00:06: setting system clock to 2014-06-14 00:02:49 UTC (1402704169)
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>ata4.00: ATAPI: DVD-ROM UJDA775, DA03, max UDMA/33
>ata4.00: configured for UDMA/33
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>scsi 3:0:0:0: CD-ROM            MATSHITA DVD-ROM UJDA775  DA03 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Attached SCSI disk
>BTRFS: device fsid 484f8251-678f-4625-a05e-9dc8483f20a9 devid 1 transid 576087 /dev/root
>BTRFS: detected SSD devices, enabling SSD mode
>VFS: Mounted root (btrfs filesystem) readonly on device 0:10.
>devtmpfs: mounted
>Freeing unused kernel memory: 692K (ffffffff814ca000 - ffffffff81577000)
>systemd-udevd[708]: starting version 204
>pps_core: LinuxPPS API ver. 1 registered
>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>PTP clock support registered
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>Linux agpgart interface v0.103
>usbcore: registered new device driver usb
>e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-pci: EHCI PCI platform driver
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
>ACPI: Sleep Button [SLPB]
>uhci_hcd: USB Universal Host Controller Interface driver
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button [PWRF]
>ACPI: AC Adapter [AC] (on-line)
>Non-volatile memory driver v1.3
>thinkpad_acpi: ThinkPad ACPI Extras v0.25
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7LET51WW (1.21 ), EC 7KHT22WW-1.06
>thinkpad_acpi: Lenovo ThinkPad T61, model 6464W71
>thinkpad_acpi: detected a 16-level brightness capable ThinkPad
>cfg80211: Calling CRDA to update world regulatory domain
>iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
>iwl4965: Copyright(c) 2003-2011 Intel Corporation
>iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
>iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
>thinkpad_acpi: ACPI backlight control delay disabled
>iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
>iwl4965 0000:03:00.0: irq 47 for MSI/MSI-X
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>ACPI: Battery Slot [BAT0] (battery present)
>thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
>iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
>thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
>input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: no vqmmc regulator found
>mmc0: no vmmc regulator found
>sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
>sdhci-pci 0000:15:00.3: SDHCI controller found [1180:0843] (rev 11)
>mmc1: no vqmmc regulator found
>mmc1: no vmmc regulator found
>mmc1: SDHCI controller on PCI [0000:15:00.3] using DMA
>ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:12:d7:6a
>e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>ehci-pci 0000:00:1a.7: EHCI Host Controller
>ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
>ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci-pci 0000:00:1d.7: EHCI Host Controller
>ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci-pci 0000:00:1d.7: debug port 1
>ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
>ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac
>snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>sound hdaudioC0D0: autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker
>sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>sound hdaudioC0D0:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
>sound hdaudioC0D0:    mono: mono_out=0x0
>sound hdaudioC0D0:    dig-out=0x1b/0x0
>sound hdaudioC0D0:    inputs:
>sound hdaudioC0D0:      Internal Mic=0x15
>sound hdaudioC0D0:      Dock Mic=0x1c
>sound hdaudioC0D0:      Mic=0x14
>random: nonblocking pool is initialized
>psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 67352
>psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>usb 3-1: new full-speed USB device number 2 using uhci_hcd
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
>Bluetooth: Core ver 2.19
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>usbcore: registered new interface driver btusb
>e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
>psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
>[drm] Initialized drm 1.1.0 20060810
>e1000e: eth0 NIC Link is Down
>e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[drm:i915_dump_device_info] i915 device info: gen=4, pciid=0x2a02 flags=is_mobile,is_crestline,has_fbc,has_hotplug,has_overlay,supports_tv,
>[drm:intel_detect_pch] No PCH found.
>[drm] Memory usable by graphics device = 512M
>[drm:i915_gem_gtt_init] GMADR size = 256M
>[drm:i915_gem_gtt_init] GTT stolen size = 8M
>[drm:i915_gem_gtt_init] ppgtt mode: 0
>[drm:intel_opregion_setup] graphic opregion physical addr: 0xbf6ce85a
>[drm:intel_opregion_setup] Public ACPI methods supported
>[drm:intel_opregion_setup] SWSCI supported
>[drm:swsci_setup] SWSCI BIOS requested (00010673) SBCB callbacks that are not supported (00080673)
>[drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00010673
>[drm:intel_opregion_setup] ASLE supported
>i915 0000:00:02.0: irq 49 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>[drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[drm:intel_parse_bios] Using VBT from OpRegion: $VBT CRESTLINE      d
>[drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x8 0xa
>[drm:parse_lfp_panel_data] VBT initial LVDS value 4230033c
>[drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 37, level 0
>[drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port
>[drm:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
>[drm:parse_mipi] No MIPI BDB found
>[drm:intel_dsm_pci_probe] no _DSM method for intel device
>[drm:i915_gem_init_stolen] found 8388608 bytes of stolen memory at bf800000
>[drm:intel_display_power_get] enabling always-on
>[drm:intel_modeset_init] 2 display pipes available.
>[drm:intel_modeset_init] pipe A sprite A init failed: -19
>[drm:intel_modeset_init] pipe B sprite B init failed: -19
>[drm:intel_lvds_init] using preferred mode from EDID: 
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_lvds_init] detected dual-link lvds configuration
>[drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 12056400/12056655, sysfs interface registered
>[drm:intel_setup_outputs] probing SDVOB
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[drm:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 02 3C 06 01 01 01 01 00
>[drm:intel_sdvo_get_capabilities] SDVO capabilities:
>  vendor_id: 2
>  device_id: 60
>  device_rev_id: 6
>  sdvo_version_major: 1
>  sdvo_version_minor: 1
>  sdvo_inputs_mask: 1
>  smooth_scaling: 0
>  sharp_scaling: 0
>  up_scaling: 0
>  down_scaling: 0
>  stall_support: 0
>  output_flags: 1
>[drm:intel_sdvo_dvi_init] initialising DVI device 0
>[drm:intel_sdvo_debug_write] SDVOB: W: 0C                         (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
>[drm:intel_sdvo_debug_write] SDVOB: W: 0D 01 00                   (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
>[drm:intel_sdvo_debug_write] SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
>[drm:intel_sdvo_read_response] SDVOB: R: ... failed
>[drm:intel_sdvo_debug_write] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success)
>[drm:intel_sdvo_debug_write] SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) C4 09 20 4E
>[drm:intel_sdvo_init] SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>[drm:intel_setup_outputs] probing SDVOC
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 2
>[drm:intel_sdvo_read_byte] i2c transfer returned -6
>[drm:intel_sdvo_init] No SDVO device found on SDVOC
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 1
>[drm:intel_tv_init] Integrated TV is not present.
>[drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled
>[drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: enabled, pipe B
>[drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: enabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DVI-D-1] hw state readout: disabled
>[drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 120238 1680 1712 1760 1888 1050 1051 1054 1065, type: 0x0 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 120238
>[drm:intel_dump_pipe_config] pipe src size: 640x400
>[drm:intel_dump_pipe_config] gmch pfit: control: 0xa0000000, ratios: 0x06180618, lvds border: 0x00008000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[drm:check_encoder_state] [ENCODER:17:DAC-17]
>[drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:7]
>[drm:i9xx_get_plane_config] pipe/plane 1/1 with fb: size=640x400@32, offset=0, pitch 6656, size 0x28a000
>[drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=28a000
>[drm:i915_pages_create_for_stolen] offset=0x0, size=2662400
>[drm:intel_alloc_plane_obj] plane fb obj ffff8800af636900
>[drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 28a000
>[drm:i915_gem_setup_global_gtt] clearing unused GTT space: [28a000, 1ffff000]
>[drm:i915_gem_context_init] fake context support initialized
>[drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[drm:i915_pages_create_for_stolen] offset=0x28a000, size=131072
>[drm:i915_gem_object_create_stolen] creating stolen object: size=1000
>[drm:i915_pages_create_for_stolen] offset=0x2aa000, size=4096
>[drm] initialized overlay support
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_setup_crtcs] 
>[drm:drm_enable_connectors] connector 8 enabled? yes
>[drm:drm_enable_connectors] connector 16 enabled? no
>[drm:drm_enable_connectors] connector 19 enabled? no
>[drm:intel_fb_initial_config] looking for cmdline mode on connector 8
>[drm:intel_fb_initial_config] looking for preferred mode on connector 8
>[drm:intel_fb_initial_config] connector LVDS-1 on crtc 7: 1680x1050
>[drm:intel_fb_initial_config] connector 16 not enabled, skipping
>[drm:intel_fb_initial_config] connector 19 not enabled, skipping
>[drm:drm_setup_crtcs] desired mode 1680x1050 set on crtc 7
>[drm:intelfb_create] no BIOS fb, allocating a new one
>[drm:i915_gem_object_create_stolen] creating stolen object: size=6bb000
>[drm:intelfb_create] allocated 1680x1050 fb: 0x002c0000, bo ffff8800afd47380
>i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>i915 0000:00:02.0: registered panic notifier
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm:i965_irq_handler] *ERROR* pipe A underrun
>[drm:asle_set_backlight] bclp = 0x80000048
>[drm:asle_set_backlight] updating opregion backlight 72/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 3404232
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>acpi device:02: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[drm:i915_gem_open] 
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:7] [FB:22] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 21:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 120600 1680 1712 1760 1888 1050 1051 1054 1065, type: 0x48 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 120600
>[drm:intel_dump_pipe_config] pipe src size: 1680x1050
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:i9xx_pfit_disable] disabling pfit, current: 0xa0000000
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:intel_update_fbc] no output, disabling
>[drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[drm:i9xx_update_primary_plane] Writing base 002C0000 00000000 0 0 6720
>[drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:1680x1050]
>[drm:i965_update_wm] self-refresh entries: 105, wm: 407
>[drm:i965_update_wm] self-refresh watermark: display plane 407 cursor 32
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 407
>[drm:intel_update_fbc] disabled per chip default
>[drm:intel_panel_enable_backlight] pipe B
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[drm:check_encoder_state] [ENCODER:17:DAC-17]
>[drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:7]
>[drm:i915_gem_open] 
>[drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:7] [FB:22] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[drm:i915_gem_open] 
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:7] [FB:22] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[drm:i915_gem_open] 
>[drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:drm_mode_addfb] [FB:23]
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:23] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 24:"" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
>[drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 120600 1680 1712 1760 1888 1050 1051 1054 1065, type: 0x48 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 120600
>[drm:intel_dump_pipe_config] pipe src size: 1680x1050
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:intel_update_fbc] no output, disabling
>[drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[drm:i9xx_update_primary_plane] Writing base 0097B000 00000000 0 0 7168
>[drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:]
>[drm:i965_update_wm] self-refresh entries: 105, wm: 407
>[drm:i965_update_wm] self-refresh watermark: display plane 407 cursor 32
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 407
>[drm:intel_update_fbc] disabled per chip default
>[drm:intel_panel_enable_backlight] pipe A
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[drm:check_encoder_state] [ENCODER:17:DAC-17]
>[drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:7]
>[drm:drm_mode_setcrtc] [CRTC:7]
>[drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5]
>[drm:i915_gem_open] 
>[drm:i915_gem_open] 
>[drm:i965_update_wm] self-refresh entries: 105, wm: 407
>[drm:i965_update_wm] self-refresh watermark: display plane 407 cursor 32
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 407
>[drm:intel_crtc_cursor_set] cursor off
>e1000e: eth0 NIC Link is Down
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.001 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>[drm:i915_get_vblank_counter] trying to get vblank count for disabled pipe B
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:intel_update_fbc] no output, disabling
>PM: suspend of devices complete after 1053.839 msecs
>PM: late suspend of devices complete after 16.045 msecs
>ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
>e1000e 0000:00:19.0: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
>ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
>PM: noirq suspend of devices complete after 19.900 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>smpboot: CPU 1 is now offline
>ACPI: Low-level resume complete
>PM: Restoring platform NVS memory
>Enabling non-boot CPUs ...
>x86: Booting SMP configuration:
>smpboot: Booting Node 0 Processor 1 APIC 0x1
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
>ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
>ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
>PM: noirq resume of devices complete after 16.327 msecs
>PM: early resume of devices complete after 0.164 msecs
>e1000e 0000:00:19.0: System wakeup disabled by ACPI
>usb usb3: root hub lost power or was reset
>usb usb4: root hub lost power or was reset
>snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>usb usb5: root hub lost power or was reset
>sd 0:0:0:0: [sda] Starting disk
>usb usb6: root hub lost power or was reset
>usb usb7: root hub lost power or was reset
>sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>ata5: port disabled--ignoring
>[drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[drm:intel_opregion_setup] graphic opregion physical addr: 0xbf6ce85a
>[drm:intel_opregion_setup] Public ACPI methods supported
>[drm:intel_opregion_setup] SWSCI supported
>[drm:swsci_setup] SWSCI BIOS requested (00010673) SBCB callbacks that are not supported (00080673)
>[drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00010673
>[drm:intel_opregion_setup] ASLE supported
>[drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[drm:i915_pages_create_for_stolen] offset=0x28a000, size=131072
>[drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DVI-D-1] hw state readout: disabled
>[drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 120600 1680 1712 1760 1888 1050 1051 1054 1065, type: 0x48 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 120600
>[drm:intel_dump_pipe_config] pipe src size: 1680x1050
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[drm:i9xx_update_primary_plane] Writing base 0097B000 00000000 0 0 7168
>[drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:]
>[drm:i965_update_wm] self-refresh entries: 105, wm: 407
>[drm:i965_update_wm] self-refresh watermark: display plane 407 cursor 32
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 407
>[drm:intel_update_fbc] disabled per chip default
>[drm:intel_panel_enable_backlight] pipe A
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[drm:check_encoder_state] [ENCODER:17:DAC-17]
>[drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:7]
>[drm:intel_resume_hotplug] running encoder hotplug functions
>[drm:intel_sdvo_debug_write] SDVOB: W: 0D 01 00                   (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=0
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_hpd_irq_event] [CONNECTOR:16:VGA-1] status updated from unknown to disconnected
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_hpd_irq_event] [CONNECTOR:19:DVI-D-1] status updated from unknown to disconnected
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>thinkpad_acpi: ACPI backlight control delay disabled
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>ata4.00: configured for UDMA/33
>usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>PM: resume of devices complete after 511.282 msecs
>Restarting tasks ... done.
>video LNXVIDEO:00: Restoring backlight state
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:23] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5]
>[drm:drm_mode_setcrtc] [CRTC:7]
>[drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5]
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:intel_crtc_cursor_set] cursor off
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.001 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>[drm:i915_get_vblank_counter] trying to get vblank count for disabled pipe B
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
>[drm:intel_update_fbc] no output, disabling
>PM: suspend of devices complete after 1037.054 msecs
>PM: late suspend of devices complete after 16.026 msecs
>uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
>ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
>e1000e 0000:00:19.0: System wakeup enabled by ACPI
>ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
>uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
>PM: noirq suspend of devices complete after 16.032 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>smpboot: CPU 1 is now offline
>ACPI: Low-level resume complete
>PM: Restoring platform NVS memory
>Enabling non-boot CPUs ...
>x86: Booting SMP configuration:
>smpboot: Booting Node 0 Processor 1 APIC 0x1
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
>uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
>ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
>ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
>PM: noirq resume of devices complete after 16.540 msecs
>PM: early resume of devices complete after 0.193 msecs
>e1000e 0000:00:19.0: System wakeup disabled by ACPI
>usb usb3: root hub lost power or was reset
>usb usb4: root hub lost power or was reset
>snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>usb usb5: root hub lost power or was reset
>usb usb6: root hub lost power or was reset
>usb usb7: root hub lost power or was reset
>sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[drm:intel_opregion_setup] graphic opregion physical addr: 0xbf6ce85a
>[drm:intel_opregion_setup] Public ACPI methods supported
>[drm:intel_opregion_setup] SWSCI supported
>ata5: port disabled--ignoring
>sd 0:0:0:0: [sda] Starting disk
>[drm:swsci_setup] SWSCI BIOS requested (00010673) SBCB callbacks that are not supported (00080673)
>[drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00010673
>[drm:intel_opregion_setup] ASLE supported
>[drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[drm:i915_pages_create_for_stolen] offset=0x28a000, size=131072
>[drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DVI-D-1] hw state readout: disabled
>[drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 120600 1680 1712 1760 1888 1050 1051 1054 1065, type: 0x48 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 120600
>[drm:intel_dump_pipe_config] pipe src size: 1680x1050
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[drm:i9xx_update_primary_plane] Writing base 0097B000 00000000 0 0 7168
>[drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:]
>[drm:i965_update_wm] self-refresh entries: 105, wm: 407
>[drm:i965_update_wm] self-refresh watermark: display plane 407 cursor 32
>[drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 407
>[drm:intel_update_fbc] disabled per chip default
>[drm:intel_panel_enable_backlight] pipe A
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[drm:check_encoder_state] [ENCODER:17:DAC-17]
>[drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[drm:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:7]
>[drm:intel_resume_hotplug] running encoder hotplug functions
>[drm:intel_sdvo_debug_write] SDVOB: W: 0D 01 00                   (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=0
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_hpd_irq_event] [CONNECTOR:16:VGA-1] status updated from unknown to disconnected
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_hpd_irq_event] [CONNECTOR:19:DVI-D-1] status updated from unknown to disconnected
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>thinkpad_acpi: ACPI backlight control delay disabled
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>ata4.00: configured for UDMA/33
>PM: resume of devices complete after 507.264 msecs
>Restarting tasks ... done.
>video LNXVIDEO:00: Restoring backlight state
>[drm:asle_set_backlight] bclp = 0x800000ff
>[drm:asle_set_backlight] updating opregion backlight 255/255
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 12056655
>[drm:asle_work] No request on ASLC interrupt 0x00000000
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:23] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5]
>[drm:drm_mode_setcrtc] [CRTC:7]
>[drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5]
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 11:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 12:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa
>[drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[drm:intel_crt_detect] CRT not detected via hotplug
>[drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:VGA-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_detect] [CONNECTOR:19:DVI-D-1]
>[drm:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>[drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
>[drm:intel_sdvo_detect] SDVO response 0 0 [1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DVI-D-1] disconnected

Actions: View

Attachments on bug 80010: 101023 | 101024 | 101026 | 101027 | 101252 | 101253

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.