Attachment 101644 Details for Bug 80376 – dmesg

dmesg

kms_pipe_crc_basic_suspend-read-crc-pipe-B.dmesg (text/plain), 117.19 KB, created by Guo Jinxian on 2014-06-24 07:40:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-06-24 07:40:01 UTC

Size: 117.19 KB

patch

obsolete

>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 13 pages/cpu @f5e04000 s30208 r0 d23040 u53248
>[    0.000000] pcpu-alloc: s30208 r0 d23040 u53248 alloc=13*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 827933
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_06_24/drm-intel-nightly/794975a476b0b5e16d04ed1e5d082b9e2b54b4fb/bzImage_i386 root=/dev/sda3 drm.debug=0xe modules_path=kernels//nightly_parents/2014_06_24/drm-intel-nightly/794975a476b0b5e16d04ed1e5d082b9e2b54b4fb/modules_i386/lib/modules/3.16.0-rc2_drm-intel-nightly_794975_20140624+ kexec_jump_back_entry=0x4d9825d3
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Initializing HighMem for node 0 (000377fe:000cb000)
>[    0.000000] Initializing Movable for node 0 (00000000:00000000)
>[    0.000000] Memory: 3258352K/3318836K available (7148K kernel code, 500K rwdata, 3560K rodata, 20756K init, 400K bss, 60484K reserved, 2411992K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1af6000 - 0xc2f3b000   (20756 kB)
>      .data : 0xc16fb49a - 0xc1af4040   (4066 kB)
>      .text : 0xc1000000 - 0xc16fb49a   (7149 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:2304 nr_irqs:744 16
>[    0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3392.128 MHz processor
>[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.25 BogoMIPS (lpj=3392128)
>[    0.000171] pid_max: default: 32768 minimum: 301
>[    0.000257] ACPI: Core revision 20140424
>[    0.003476] ACPI: All ACPI Tables successfully acquired
>[    0.003640] Security Framework initialized
>[    0.003729] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.003816] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.004047] CPU: Physical Processor ID: 0
>[    0.004130] CPU: Processor Core ID: 0
>[    0.004214] mce: CPU supports 9 MCE banks
>[    0.004303] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.004310] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 6
>[    0.004682] Freeing SMP alternatives memory: 32K (c2f3b000 - c2f43000)
>[    0.004798] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.005287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.015377] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
>[    0.015611] TSC deadline timer enabled
>[    0.015625] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
>[    0.015927] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.016059] ... version:                3
>[    0.016141] ... bit width:              48
>[    0.016223] ... generic registers:      4
>[    0.016306] ... value mask:             0000ffffffffffff
>[    0.016390] ... max period:             0000ffffffffffff
>[    0.016474] ... fixed-purpose events:   3
>[    0.016557] ... event mask:             000000070000000f
>[    0.016821] CPU 1 irqstacks, hard=f5916000 soft=f5920000
>[    0.016822] x86: Booting SMP configuration:
>[    0.016906] .... node  #0, CPUs:      #1
>[    0.027530] Initializing CPU#1
>[    0.028138] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.030283] CPU 2 irqstacks, hard=f5932000 soft=f5934000
>[    0.030442]  #2
>[    0.040834] Initializing CPU#2
>[    0.041606] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.043752] CPU 3 irqstacks, hard=f5952000 soft=f5954000
>[    0.043912]  #3
>[    0.054304] Initializing CPU#3
>[    0.055075] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.057220] CPU 4 irqstacks, hard=f5986000 soft=f5988000
>[    0.057379]  #4
>[    0.067832] Initializing CPU#4
>[    0.068551] CPU4: Thermal LVT vector (0xfa) already installed
>[    0.070698] CPU 5 irqstacks, hard=f5992000 soft=f5994000
>[    0.070857]  #5
>[    0.081249] Initializing CPU#5
>[    0.082020] CPU5: Thermal LVT vector (0xfa) already installed
>[    0.084166] CPU 6 irqstacks, hard=f59a6000 soft=f59b8000
>[    0.084326]  #6
>[    0.094718] Initializing CPU#6
>[    0.095489] CPU6: Thermal LVT vector (0xfa) already installed
>[    0.097631] CPU 7 irqstacks, hard=f59c2000 soft=f59c4000
>[    0.097790]  #7
>[    0.108182] Initializing CPU#7
>[    0.108954] CPU7: Thermal LVT vector (0xfa) already installed
>[    0.111055] x86: Booted up 1 node, 8 CPUs
>[    0.111296] smpboot: Total of 8 processors activated (54274.04 BogoMIPS)
>[    0.116884] devtmpfs: initialized
>[    0.117222] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
>[    0.117391] reboot: Dell OptiPlex 990 series board detected. Selecting PCI-method for reboots.
>[    0.117678] xor: automatically using best checksumming function:
>[    0.127777]    avx       : 25676.000 MB/sec
>[    0.127886] RTC time:  7:27:27, date: 06/24/14
>[    0.128008] NET: Registered protocol family 16
>[    0.128233] cpuidle: using governor ladder
>[    0.129581] cpuidle: using governor menu
>[    0.129749] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.129881] ACPI: bus type PCI registered
>[    0.130017] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.130152] PCI: not using MMCONFIG
>[    0.130269] PCI: PCI BIOS revision 2.10 entry at 0xfce72, last bus=3
>[    0.130355] PCI: Using configuration type 1 for base access
>[    0.130444] dmi type 0xB1 record - unknown flag
>[    0.150613] raid6: mmxx1     5742 MB/s
>[    0.167630] raid6: mmxx2     6113 MB/s
>[    0.184643] raid6: sse1x1    4855 MB/s
>[    0.201663] raid6: sse1x2    5875 MB/s
>[    0.218680] raid6: sse2x1    9773 MB/s
>[    0.235700] raid6: sse2x2   11828 MB/s
>[    0.235782] raid6: using algorithm sse2x2 (11828 MB/s)
>[    0.235866] raid6: using ssse3x1 recovery algorithm
>[    0.235982] ACPI: Added _OSI(Module Device)
>[    0.236065] ACPI: Added _OSI(Processor Device)
>[    0.236148] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.236231] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.243741] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.261100] ACPI: Dynamic OEM Table Load:
>[    0.261251] ACPI: SSDT 0xF586A000 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20090903)
>[    0.268047] ACPI: Dynamic OEM Table Load:
>[    0.268196] ACPI: SSDT 0xF5826400 000303 (v01 PmRef  ApIst    00003000 INTL 20090903)
>[    0.273967] ACPI: Dynamic OEM Table Load:
>[    0.274116] ACPI: SSDT 0xF5806E00 000119 (v01 PmRef  ApCst    00003000 INTL 20090903)
>[    0.278643] ACPI: Interpreter enabled
>[    0.278733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.278935] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.279142] ACPI: (supports S0 S3 S4 S5)
>[    0.279224] ACPI: Using IOAPIC for interrupt routing
>[    0.279319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.279672] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[    0.279806] PCI: Using MMCONFIG for extended config space
>[    0.279902] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.292695] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.292784] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.292939] \_SB_.PCI0:_OSC invalid UUID
>[    0.292940] _OSC request data:1 1f 0 
>[    0.292943] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.293394] PCI host bridge to bus 0000:00
>[    0.293478] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.293563] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.293649] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.293735] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.293822] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
>[    0.293910] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
>[    0.294002] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>[    0.294065] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
>[    0.294075] pci 0000:00:02.0: reg 0x10: [mem 0xe0c00000-0xe0ffffff 64bit]
>[    0.294080] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.294083] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.294161] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.294179] pci 0000:00:16.0: reg 0x10: [mem 0xe1ab0000-0xe1ab000f 64bit]
>[    0.294237] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.294294] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
>[    0.294309] pci 0000:00:16.3: reg 0x10: [io  0x30e0-0x30e7]
>[    0.294317] pci 0000:00:16.3: reg 0x14: [mem 0xe1a90000-0xe1a90fff]
>[    0.294431] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.294447] pci 0000:00:19.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff]
>[    0.294454] pci 0000:00:19.0: reg 0x14: [mem 0xe1a80000-0xe1a80fff]
>[    0.294462] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.294518] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.304115] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.304252] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.304271] pci 0000:00:1a.0: reg 0x10: [mem 0xe1a70000-0xe1a703ff]
>[    0.304353] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.304395] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.304513] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.304529] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a60000-0xe1a63fff 64bit]
>[    0.304596] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.304626] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.304746] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.304884] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.304925] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.305046] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    0.305185] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.305226] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.305348] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.305366] pci 0000:00:1d.0: reg 0x10: [mem 0xe1a50000-0xe1a503ff]
>[    0.305449] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.305488] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.305602] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.305668] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.305784] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
>[    0.305932] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>[    0.305949] pci 0000:00:1f.2: reg 0x10: [io  0x30d0-0x30d7]
>[    0.305956] pci 0000:00:1f.2: reg 0x14: [io  0x30c0-0x30c3]
>[    0.305963] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
>[    0.305970] pci 0000:00:1f.2: reg 0x1c: [io  0x30a0-0x30a3]
>[    0.305977] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.305984] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a40000-0xe1a407ff]
>[    0.306024] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.306078] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    0.306092] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a30000-0xe1a300ff 64bit]
>[    0.306113] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
>[    0.306247] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.306419] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.306507] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>[    0.306511] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
>[    0.306519] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>[    0.306581] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>[    0.306674] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.306676] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.306677] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.306678] pci 0000:00:1e.0:   bridge window [mem 0xcfa00000-0xfeafffff] (subtractive decode)
>[    0.306680] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>[    0.306700] pci_bus 0000:00: on NUMA node 0
>[    0.307005] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
>[    0.307623] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
>[    0.308240] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
>[    0.308853] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.309467] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15), disabled.
>[    0.310048] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.310661] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15), disabled.
>[    0.311243] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.311874] ACPI: Enabled 2 GPEs in block 00 to 3F
>[    0.312070] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.312203] vgaarb: loaded
>[    0.312287] vgaarb: bridge control possible 0000:00:02.0
>[    0.312425] SCSI subsystem initialized
>[    0.312535] libata version 3.00 loaded.
>[    0.312562] ACPI: bus type USB registered
>[    0.312660] usbcore: registered new interface driver usbfs
>[    0.312752] usbcore: registered new interface driver hub
>[    0.312849] usbcore: registered new device driver usb
>[    0.312951] pps_core: LinuxPPS API ver. 1 registered
>[    0.313036] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.313174] PTP clock support registered
>[    0.313307] PCI: Using ACPI for IRQ routing
>[    0.313390] PCI: pci_cache_line_size set to 64 bytes
>[    0.313422] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
>[    0.313423] e820: reserve RAM buffer [mem 0xcaa7f000-0xcbffffff]
>[    0.313425] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
>[    0.313426] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
>[    0.313510] NetLabel: Initializing
>[    0.313592] NetLabel:  domain hash size = 128
>[    0.313675] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.313767] NetLabel:  unlabeled traffic allowed by default
>[    0.313933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.314313] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.316419] Switched to clocksource hpet
>[    0.318717] pnp: PnP ACPI init
>[    0.318813] ACPI: bus type PNP registered
>[    0.318966] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.319056] system 00:00: [io  0xffff] has been reserved
>[    0.319141] system 00:00: [io  0xffff] has been reserved
>[    0.319226] system 00:00: [io  0xffff] has been reserved
>[    0.319310] system 00:00: [io  0x0400-0x0453] could not be reserved
>[    0.319397] system 00:00: [io  0x0458-0x047f] has been reserved
>[    0.319492] system 00:00: [io  0x0500-0x057f] has been reserved
>[    0.319578] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.319664] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.319687] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.319720] system 00:02: [io  0x0454-0x0457] has been reserved
>[    0.319810] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.319991] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.320110] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.320202] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.320288] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.320375] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.320476] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.320563] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.320650] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.320737] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.320824] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.320912] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.320998] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.321031] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
>[    0.321123] system 00:05: [mem 0x40000000-0x401fffff] has been reserved
>[    0.321211] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.321275] pnp: PnP ACPI: found 6 devices
>[    0.321358] ACPI: bus type PNP unregistered
>[    0.357672] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.357772] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.357858] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>[    0.357949] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
>[    0.358040] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>[    0.358179] pci 0000:00:1e.0: PCI bridge to [bus 03]
>[    0.358272] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.358273] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.358275] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.358276] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
>[    0.358277] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.358279] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>[    0.358280] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
>[    0.358281] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
>[    0.358283] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>[    0.358284] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>[    0.358285] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.358287] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff]
>[    0.358288] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.358304] NET: Registered protocol family 2
>[    0.358490] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.358584] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.358678] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.358770] TCP: reno registered
>[    0.358852] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.358939] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.359055] NET: Registered protocol family 1
>[    0.359189] RPC: Registered named UNIX socket transport module.
>[    0.359274] RPC: Registered udp transport module.
>[    0.359358] RPC: Registered tcp transport module.
>[    0.359450] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.359555] pci 0000:00:02.0: Boot video device
>[    0.359809] PCI: CLS 64 bytes, default 64
>[    0.690758] Simple Boot Flag at 0xf3 set to 0x1
>[    0.691117] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>[    0.691827] futex hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.691951] audit: initializing netlink subsys (disabled)
>[    0.692042] audit: type=2000 audit(1403594847.672:1): initialized
>[    0.692356] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.693664] VFS: Disk quotas dquot_6.5.2
>[    0.693778] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.694277] NFS: Registering the id_resolver key type
>[    0.694367] Key type id_resolver registered
>[    0.694449] Key type id_legacy registered
>[    0.694533] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.694696] fuse init (API version 7.23)
>[    0.694846] msgmni has been set to 1653
>[    0.695112] bounce: pool size: 64 pages
>[    0.695200] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.695337] io scheduler noop registered
>[    0.695421] io scheduler deadline registered
>[    0.695542] io scheduler cfq registered (default)
>[    0.695975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.696383] Monitor-Mwait will be used to enter C-1 state
>[    0.696386] Monitor-Mwait will be used to enter C-2 state
>[    0.696388] Monitor-Mwait will be used to enter C-3 state
>[    0.696396] ACPI: acpi_idle registered with cpuidle
>[    0.698395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.719110] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.740069] 0000:00:16.3: ttyS1 at I/O 0x30e0 (irq = 17, base_baud = 115200) is a 16550A
>[    0.740388] Non-volatile memory driver v1.3
>[    0.740488] Linux agpgart interface v0.103
>[    0.741596] brd: module loaded
>[    0.741788] Loading iSCSI transport class v2.0-870.
>[    0.743330] iscsi: registered transport (tcp)
>[    0.743552] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.743691] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.743833] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.744000] iscsi: registered transport (qla4xxx)
>[    0.744103] QLogic iSCSI HBA Driver
>[    0.744195] Emulex LightPulse Fibre Channel SCSI driver 10.2.8001.0.
>[    0.744281] Copyright(c) 2004-2014 Emulex.  All rights reserved.
>[    0.744421] DC390: clustering now enabled by default. If you get problems load
>[    0.744570]        with "disable_clustering=1" and report to maintainers
>[    0.744702] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.744824] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
>[    0.744989] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.745089] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.745209] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.745317] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.745510] SCSI Media Changer driver v0.25 
>[    0.745664] ahci 0000:00:1f.2: version 3.0
>[    0.745751] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>[    0.756661] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
>[    0.756806] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
>[    0.759106] scsi0 : ahci
>[    0.759306] scsi1 : ahci
>[    0.759466] scsi2 : ahci
>[    0.759633] scsi3 : ahci
>[    0.759792] scsi4 : ahci
>[    0.759976] scsi5 : ahci
>[    0.760088] ata1: DUMMY
>[    0.760178] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 40
>[    0.760311] ata3: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40200 irq 40
>[    0.760442] ata4: DUMMY
>[    0.760522] ata5: DUMMY
>[    0.760601] ata6: DUMMY
>[    0.761332] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.761595] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.761834] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.761926] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.762022] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.762115] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.762211] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.762302] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.762485] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.762655] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    0.963600] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    0.963700] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:2b:cb:94:8d:17
>[    0.963853] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.963969] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
>[    0.964070] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.964169] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.964275] usbcore: registered new interface driver catc
>[    0.964388] usbcore: registered new interface driver kaweth
>[    0.964484] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.964621] usbcore: registered new interface driver pegasus
>[    0.964727] usbcore: registered new interface driver rtl8150
>[    0.964828] usbcore: registered new interface driver asix
>[    0.964931] usbcore: registered new interface driver ax88179_178a
>[    0.965034] usbcore: registered new interface driver cdc_ether
>[    0.965137] usbcore: registered new interface driver dm9601
>[    0.965241] usbcore: registered new interface driver gl620a
>[    0.965340] usbcore: registered new interface driver net1080
>[    0.965438] usbcore: registered new interface driver plusb
>[    0.965537] usbcore: registered new interface driver rndis_host
>[    0.965635] usbcore: registered new interface driver cdc_subset
>[    0.965748] usbcore: registered new interface driver zaurus
>[    0.965854] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.966008] usbcore: registered new interface driver cdc_ncm
>[    0.966171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.966274] ehci-pci: EHCI PCI platform driver
>[    0.966436] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.966549] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.966702] ehci-pci 0000:00:1a.0: debug port 2
>[    0.970696] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.970706] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
>[    0.976763] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.976893] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.976981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.977112] usb usb1: Product: EHCI Host Controller
>[    0.977196] usb usb1: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_794975_20140624+ ehci_hcd
>[    0.977330] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.977546] hub 1-0:1.0: USB hub found
>[    0.977651] hub 1-0:1.0: 3 ports detected
>[    0.977897] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.978065] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.978227] ehci-pci 0000:00:1d.0: debug port 2
>[    0.982206] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.982217] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
>[    0.987783] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.987915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.988003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.988134] usb usb2: Product: EHCI Host Controller
>[    0.988218] usb usb2: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_794975_20140624+ ehci_hcd
>[    0.988352] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.988569] hub 2-0:1.0: USB hub found
>[    0.988673] hub 2-0:1.0: 3 ports detected
>[    0.988859] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.988959] ohci-pci: OHCI PCI platform driver
>[    0.989063] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.989193] usbcore: registered new interface driver usb-storage
>[    0.989331] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.992271] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.992359] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.992554] mousedev: PS/2 mouse device common for all mice
>[    0.992764] rtc_cmos 00:01: RTC can wake from S4
>[    0.993066] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    0.993186] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>[    0.993329] i2c /dev entries driver
>[    0.993438] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.993699] usbcore: registered new interface driver usbhid
>[    0.993874] usbhid: USB HID core driver
>[    0.994032] TCP: cubic registered
>[    0.994114] Initializing XFRM netlink socket
>[    0.994199] NET: Registered protocol family 17
>[    0.994294] Key type dns_resolver registered
>[    0.994632] Using IPI No-Shortcut mode
>[    0.994820] registered taskstats version 1
>[    0.995194] Btrfs loaded
>[    0.995501]   Magic number: 2:470:471
>[    0.995642] PM: Hibernation image not present or could not be loaded.
>[    0.995652] Warning: unable to open an initial console.
>[    1.065821] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.067638] ata3.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
>[    1.067740] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.068822] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.071393] ata2.00: ATAPI: PLDS DVD+/-RW DH-16ABS, PD11, max UDMA/100
>[    1.072254] ata2.00: configured for UDMA/100
>[    1.076050] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16ABS PD11 PQ: 0 ANSI: 5
>[    1.077486] ata3.00: configured for UDMA/133
>[    1.101634] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.101785] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.102006] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.102147] sr 1:0:0:0: Attached scsi generic sg0 type 5
>[    1.102473] scsi 2:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
>[    1.102818] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>[    1.102841] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    1.103113] sd 2:0:0:0: [sda] Write Protect is off
>[    1.103197] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.103205] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.103817]  sda: sda1 sda2 sda3
>[    1.104216] sd 2:0:0:0: [sda] Attached SCSI disk
>[    1.106285] Freeing unused kernel memory: 20756K (c1af6000 - c2f3b000)
>[    1.128070] dracut: dracut-018-35.git20120510.fc17
>[    1.145974] udevd[1331]: starting version 182
>[    1.154982] [drm] Initialized drm 1.1.0 20060810
>[    1.155378] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    1.155678] ACPI: Power Button [PWRB]
>[    1.155924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.156223] ACPI: Power Button [PWRF]
>[    1.158139] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc,
>[    1.158150] [drm:intel_detect_pch] Found CougarPoint PCH
>[    1.158196] [drm] Memory usable by graphics device = 2048M
>[    1.158307] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.158309] [drm:i915_gem_gtt_init] GTT stolen size = 64M
>[    1.158310] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.158310] [drm] Replacing VGA console driver
>[    1.159784] Console: switching to colour dummy device 80x25
>[    1.160147] [drm:intel_opregion_setup] graphic opregion physical addr: 0xcaf7a018
>[    1.160152] [drm:intel_opregion_setup] SWSCI supported
>[    1.166850] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    1.166902] i915 0000:00:02.0: irq 42 for MSI/MSI-X
>[    1.166907] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.166909] [drm] Driver supports precise vblank timestamp query.
>[    1.166912] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.166913] [drm:validate_vbt] Using VBT from OpRegion: $VBT SANDYBRIDGE-D  d
>[    1.166915] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.166916] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.166918] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    1.166919] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.166921] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.166923] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.166924] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 0
>[    1.166926] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.166928] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.166929] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.166930] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.166935] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.166938] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at cba00000
>[    1.166939] [drm:intel_display_power_get] enabling always-on
>[    1.166965] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    1.166967] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.166968] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.166969] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.166970] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    1.166971] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.166972] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.166973] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.166974] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    1.166975] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.166976] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.166977] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.166978] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
>[    1.166979] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    1.166980] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.166981] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.166982] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.166984] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    1.166985] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.166986] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.166987] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.166988] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    1.166989] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.166990] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.166991] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.166992] [drm:intel_modeset_init] 2 display pipes available.
>[    1.167001] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.167310] [drm:intel_lvds_init] LVDS is not present in VBT
>[    1.167342] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
>[    1.167373] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.167397] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
>[    1.167459] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[    1.167473] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled
>[    1.167475] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[    1.167478] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    1.167481] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    1.167485] [drm:intel_modeset_readout_hw_state] [ENCODER:13:DAC-13] hw state readout: enabled, pipe A
>[    1.167487] [drm:intel_modeset_readout_hw_state] [ENCODER:14:TMDS-14] hw state readout: disabled, pipe A
>[    1.167489] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    1.167492] [drm:intel_modeset_readout_hw_state] [CONNECTOR:12:VGA-1] hw state readout: enabled
>[    1.167494] [drm:intel_modeset_readout_hw_state] [CONNECTOR:15:HDMI-A-1] hw state readout: disabled
>[    1.167496] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled
>[    1.167497] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[    1.167498] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.167499] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.167501] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 659903, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
>[    1.167502] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.167503] [drm:intel_dump_pipe_config] requested mode:
>[    1.167505] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.167506] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.167507] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>[    1.167509] [drm:intel_dump_crtc_timings] crtc timings: 28200 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
>[    1.167510] [drm:intel_dump_pipe_config] port clock: 28200
>[    1.167511] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.167512] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.167513] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
>[    1.167514] [drm:intel_dump_pipe_config] ips: 0
>[    1.167515] [drm:intel_dump_pipe_config] double wide: 0
>[    1.167516] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.167517] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.167520] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.167521] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[    1.167522] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.167523] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.167524] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.167525] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.167526] [drm:intel_dump_pipe_config] requested mode:
>[    1.167528] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.167528] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.167530] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.167531] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.167532] [drm:intel_dump_pipe_config] port clock: 0
>[    1.167533] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.167534] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.167535] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.167536] [drm:intel_dump_pipe_config] ips: 0
>[    1.167537] [drm:intel_dump_pipe_config] double wide: 0
>[    1.167541] [drm:intel_connector_check_state] [CONNECTOR:12:VGA-1]
>[    1.167545] [drm:check_encoder_state] [ENCODER:13:DAC-13]
>[    1.167547] [drm:check_encoder_state] [ENCODER:14:TMDS-14]
>[    1.167549] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.167551] [drm:check_crtc_state] [CRTC:6]
>[    1.167563] [drm:check_crtc_state] [CRTC:10]
>[    1.167564] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.167568] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.167575] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
>[    1.167576] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
>[    1.167578] [drm:i915_pages_create_for_stolen] offset=0x0, size=1282048
>[    1.167582] [drm:intel_alloc_plane_obj] plane fb obj f522ed00
>[    1.167583] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 139000
>[    1.167585] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [139000, 7ffff000]
>[    1.169279] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    1.169281] [drm:i915_gem_context_init] HW context support initialized
>[    1.169288] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[    1.169374] [drm:init_pipe_control] render ring pipe control offset: 0x00162000
>[    1.169378] [drm:init_status_page] bsd ring hws offset: 0x00163000
>[    1.169417] [drm:init_status_page] blitter ring hws offset: 0x00184000
>[    1.169475] [drm] Wrong MCH_SSKPD value: 0x16040307
>[    1.169477] [drm] This can cause pipe underruns and display issues.
>[    1.169479] [drm] Please upgrade your BIOS to fix this.
>[    1.169494] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1]
>[    1.169496] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1
>[    1.169498] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
>[    1.178872] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
>[    1.178879] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.203886] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.203895] Raw EDID:
>[    1.203899]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.203903]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.203907]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.203918]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.203920]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.203922]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.203924]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.203925]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216162] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.216169] Raw EDID:
>[    1.216172]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216176]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216179]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216183]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216194]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216195]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.216197]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.216199]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228444] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.228450] Raw EDID:
>[    1.228453]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228456]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228460]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228464]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228468]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228472]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.228483]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.228485]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240730] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.240736] Raw EDID:
>[    1.240739]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240743]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240747]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240751]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240755]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240767]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240769]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.240771]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.240773] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[    1.241865] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1)
>[    1.241868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.241871] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.241873] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.279915] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.312812] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.312814] Raw EDID:
>[    1.312816]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.312818]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.312820]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.312821]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.312823]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.312825]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.312827]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.312829]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347766] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.347768] Raw EDID:
>[    1.347770]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347771]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347773]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347775]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347777]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347778]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.347780]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.347782]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382677] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.382679] Raw EDID:
>[    1.382681]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382682]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382684]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382686]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382688]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382690]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.382691]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.382693]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.394309] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.394314] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.394588] hub 1-1:1.0: USB hub found
>[    1.394682] hub 1-1:1.0: 6 ports detected
>[    1.417658] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.417660] Raw EDID:
>[    1.417662]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417664]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417665]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417667]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417669]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417671]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417673]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.417674]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.417677] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[    1.418027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.418028] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.418034] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] probed modes :
>[    1.418036] [drm:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.418038] [drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.418039] [drm:drm_mode_debug_printmodeline] Modeline 22:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    1.418041] [drm:drm_mode_debug_printmodeline] Modeline 24:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    1.418042] [drm:drm_mode_debug_printmodeline] Modeline 21:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[    1.418044] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[    1.418045] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[    1.418204] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.418206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.418209] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[    1.418212] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[    1.418214] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[    1.418217] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[    1.418219] [drm:drm_setup_crtcs] 
>[    1.418222] [drm:drm_enable_connectors] connector 12 enabled? yes
>[    1.418224] [drm:drm_enable_connectors] connector 15 enabled? no
>[    1.418226] [drm:drm_enable_connectors] connector 19 enabled? no
>[    1.418229] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
>[    1.418231] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
>[    1.418233] [drm:intel_fb_initial_config] using first mode listed on connector VGA-1
>[    1.418236] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:6]: 1024x768
>[    1.418238] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.418240] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.418243] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 6
>[    1.418252] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.418253] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000
>[    1.418255] [drm:i915_pages_create_for_stolen] offset=0x139000, size=3145728
>[    1.418589] [drm:intelfb_create] allocated 1024x768 fb: 0x001a6000, bo f50e9000
>[    1.418655] fbcon: inteldrmfb (fb0) is primary device
>[    1.418676] [drm:intel_crtc_set_config] [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[    1.418677] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.418678] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.418680] [drm:drm_mode_debug_printmodeline] Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.418681] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[    1.418682] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.418684] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.418685] [drm:connected_sink_compute_bpp] [CONNECTOR:12:VGA-1] checking for sink bpp constrains
>[    1.418686] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[    1.418687] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.418687] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[    1.418688] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.418688] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.418690] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
>[    1.418691] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.418691] [drm:intel_dump_pipe_config] requested mode:
>[    1.418692] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.418693] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.418694] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.418695] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[    1.418695] [drm:intel_dump_pipe_config] port clock: 65000
>[    1.418696] [drm:intel_dump_pipe_config] pipe src size: 1024x768
>[    1.418697] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.418697] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.418698] [drm:intel_dump_pipe_config] ips: 0
>[    1.418698] [drm:intel_dump_pipe_config] double wide: 0
>[    1.437971] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 6
>[    1.437975] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    1.438384] [drm:intel_update_fbc] no output, disabling
>[    1.438399] [drm:intel_get_shared_dpll] CRTC:6 dropping existing PCH DPLL A
>[    1.438399] [drm:intel_get_shared_dpll] CRTC:6 allocated PCH DPLL A
>[    1.438400] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[    1.438401] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    1.438408] [drm:ironlake_update_primary_plane] Writing base 001A6000 00000000 0 0 4096
>[    1.439758] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
>[    1.439760] [drm:gen6_fdi_link_train] FDI train 1 done.
>[    1.440414] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[    1.440416] [drm:gen6_fdi_link_train] FDI train 2 done.
>[    1.440416] [drm:gen6_fdi_link_train] FDI train done.
>[    1.440419] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0)for crtc 6
>[    1.440419] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    1.442291] [drm:intel_update_fbc] disabled per chip default
>[    1.442293] [drm:intel_connector_check_state] [CONNECTOR:12:VGA-1]
>[    1.442297] [drm:check_encoder_state] [ENCODER:13:DAC-13]
>[    1.442298] [drm:check_encoder_state] [ENCODER:14:TMDS-14]
>[    1.442300] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.442301] [drm:check_crtc_state] [CRTC:6]
>[    1.442310] [drm:check_crtc_state] [CRTC:10]
>[    1.442311] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.442314] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.442317] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.442319] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.442320] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.442322] Console: switching to colour frame buffer device 128x48
>[    1.442328] [drm:intel_crtc_set_config] [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[    1.442330] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.442331] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.444513] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.444540] i915 0000:00:02.0: registered panic notifier
>[    1.449140] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.449314] acpi device:01: registered as cooling_device8
>[    1.449396] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.449504] [drm] Initialized i915 1.6.0 20140606 for 0000:00:02.0 on minor 0
>[    1.451999] dracut: Starting plymouth daemon
>[    1.456777] [drm:intel_crtc_set_config] [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[    1.456779] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.456780] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.461006] [drm:i915_gem_open] 
>[    1.461022] [drm:intel_crtc_set_config] [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[    1.461025] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.461026] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.461028] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.461029] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.461030] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.461037] [drm:i915_gem_open] 
>[    1.461044] [drm:intel_crtc_set_config] [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[    1.461045] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.461047] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.461048] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.461049] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.461050] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[    1.461055] [drm:i915_gem_open] 
>[    1.461085] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[    1.461087] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[    1.461089] [drm:drm_mode_getconnector] [CONNECTOR:12:?]
>[    1.461091] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1]
>[    1.461092] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1
>[    1.461095] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[    1.461096] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.486132] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.486194] Raw EDID:
>[    1.486207]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.486233]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.486258]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.486284]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.486310]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.486336]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.486362]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.486388]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.497031] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.498660] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.498722] Raw EDID:
>[    1.498734]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.498759]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.499483]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.500207]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.500915]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.501624]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.502336]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.503052]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.516008] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.516797] Raw EDID:
>[    1.517541]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.518306]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.519050]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.519783]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.520501]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.521191]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.521871]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.522540]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.535465] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.536191] Raw EDID:
>[    1.536903]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.537649]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.538397]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.539139]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.539873]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.540594]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.541292]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.541976]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.542648] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[    1.544000] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1)
>[    1.544003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.544005] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.544008] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.611408] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.612099] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.613058] hub 2-1:1.0: USB hub found
>[    1.613782] hub 2-1:1.0: 8 ports detected
>[    1.615032] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.615688] Raw EDID:
>[    1.616322]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.616957]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.617578]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.618196]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.618806]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.619418]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.620040]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.620651]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.656398] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.657056] Raw EDID:
>[    1.657680]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.658321]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.658925]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.659521]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.660113]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.660702]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.661295]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.661889]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.697539] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.698178] Raw EDID:
>[    1.698803]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.699439]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.700045]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.700639]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.701230]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.701819]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.702411]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.703001]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.703612] tsc: Refined TSC clocksource calibration: 3392.294 MHz
>[    1.738659] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[    1.739316] Raw EDID:
>[    1.739942]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.740575]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.741188]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.741798]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.742412]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.743018]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.743632]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[    1.744256]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[    1.744872] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[    1.745863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.745865] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.745872] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] probed modes :
>[    1.745874] [drm:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.745876] [drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.745877] [drm:drm_mode_debug_printmodeline] Modeline 22:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    1.745879] [drm:drm_mode_debug_printmodeline] Modeline 24:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    1.745880] [drm:drm_mode_debug_printmodeline] Modeline 21:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[    1.745886] [drm:drm_mode_getconnector] [CONNECTOR:12:?]
>[    1.748026] [drm:drm_mode_getconnector] [CONNECTOR:15:?]
>[    1.748028] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[    1.748029] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[    1.748220] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.748225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.748229] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[    1.748237] [drm:drm_mode_getconnector] [CONNECTOR:15:?]
>[    1.748239] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[    1.748241] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[    1.748434] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.748439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.748442] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[    1.748453] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.748456] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[    1.748459] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[    1.748470] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[    1.748472] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.748473] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[    1.748474] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[    1.748477] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[    1.790484] parport0: PC-style at 0x378 (0x778)
>[    1.794151] ACPI Warning: 
>[    1.795053] SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
>[    1.795153] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    1.797959] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.799026] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
>[    1.800873] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    1.802239] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.803510] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO)
>[    1.803551] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    1.806040]  (20140424/utaddress-258)
>[    1.808638] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.808642] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
>[    1.808643] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.808643] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    1.808865] ACPI Warning: SystemIO range 0x00003040-0x0000305f conflicts with OpRegion 0x00003040-0x0000304f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
>[    1.808866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.808917] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[    1.809643] iTCO_vendor_support: vendor-support=0
>[    1.809751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.809763] ppdev: user-space parallel port driver
>[    1.809770] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[    1.809873] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.818147] sound hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
>[    1.818690] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>[    1.818692] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    1.818693] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    1.818694] sound hdaudioC0D0:    mono: mono_out=0x0
>[    1.818695] sound hdaudioC0D0:    inputs:
>[    1.818697] sound hdaudioC0D0:      Rear Mic=0x19
>[    1.818699] sound hdaudioC0D0:      Front Mic=0x18
>[    1.848523] dracut: Checking ext4: /dev/sda3
>[    1.849875] dracut: issuing e2fsck -a  /dev/sda3
>[    1.855668] dracut: /dev/sda3: clean, 749060/6815744 files, 24317657/27256320 blocks
>[    1.857420] dracut: Remounting /dev/sda3 with -o ro
>[    1.861525] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    1.865388] dracut: Mounted root filesystem /dev/sda3
>[    1.876317] device-mapper: uevent: version 1.0.3
>[    1.877663] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    1.909356] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
>[    1.912308]  [PCSPP,TRISTATE]
>[    1.913637] parport0: irq 7 detected
>[    2.002664] dracut: Switching root
>[    2.050984] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.057754] systemd[1]: Failed to insert module 'ipv6'
>[    2.057949] systemd[1]: Set hostname to <x-sgb4>.
>[    2.058967] random: systemd urandom read with 87 bits of entropy available
>[    2.061966] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c31c
>[    2.061967] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.061968] usb 2-1.5: Product: USB Keyboard
>[    2.061969] usb 2-1.5: Manufacturer: Logitech
>[    2.075596] LVM: Logical Volume autoactivation enabled.
>[    2.076742] LVM: Activation generator successfully completed.
>[    2.107474] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C31C.0001/input/input7
>[    2.109914] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input0
>[    2.124516] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    2.125729] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    2.126905] systemd[1]: Starting Syslog Socket.
>[    2.128025] systemd[1]: Listening on Syslog Socket.
>[    2.129145] systemd[1]: Starting Replay Read-Ahead Data...
>[    2.130558] systemd[1]: Starting Collect Read-Ahead Data...
>[    2.131656] systemd-readahead[2455]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    2.134849] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    2.135408] systemd-readahead[2456]: Failed to create fanotify object: Function not implemented
>[    2.138014] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    2.138047] systemd[1]: Starting Delayed Shutdown Socket.
>[    2.140325] systemd[1]: Listening on Delayed Shutdown Socket.
>[    2.140368] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    2.143817] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    2.143848] systemd[1]: Starting Encrypted Volumes.
>[    2.147526] systemd[1]: Reached target Encrypted Volumes.
>[    2.147559] systemd[1]: Starting Journal Socket.
>[    2.151169] systemd[1]: Listening on Journal Socket.
>[    2.151207] systemd[1]: Mounting Debug File System...
>[    2.154959] systemd[1]: Mounting POSIX Message Queue File System...
>[    2.157398] systemd[1]: Starting Journal Service...
>[    2.160900] systemd[1]: Started Journal Service.
>[    2.161168] systemd[1]: Starting udev Kernel Socket.
>[    2.163333] systemd[1]: Listening on udev Kernel Socket.
>[    2.163396] systemd[1]: Starting udev Control Socket.
>[    2.166166] systemd-journald[2460]: Vacuuming done, freed 0 bytes
>[    2.168106] systemd[1]: Listening on udev Control Socket.
>[    2.168174] systemd[1]: Starting udev Coldplug all Devices...
>[    2.171899] systemd[1]: Mounting Huge Pages File System...
>[    2.174387] systemd[1]: Starting Create static device nodes in /dev...
>[    2.177353] systemd[1]: Starting LVM2 metadata daemon socket.
>[    2.180588] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    2.180628] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    2.183124] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    2.183154] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    2.183340] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C31C.0002/input/input8
>[    2.183420] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input1
>[    2.191509] systemd[1]: Expecting device dev-disk-by\x2duuid-d7751c36\x2de404\x2d4cab\x2db7f3\x2dd846e4aa8174.device...
>[    2.193780] systemd[1]: Mounting Temporary Directory...
>[    2.197756] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    2.197999] systemd[1]: Expecting device dev-disk-by\x2duuid-6f062b72\x2df0a2\x2d45d9\x2dbe97\x2d8295c274603a.device...
>[    2.202694] systemd[1]: Started Replay Read-Ahead Data.
>[    2.203082] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C31C.0003/input/input9
>[    2.203161] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Keyboard] on usb-0000:00:1d.0-1.5/input2
>[    2.209206] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    2.211815] systemd[1]: Started Collect Read-Ahead Data.
>[    2.213325] systemd[1]: Mounted Debug File System.
>[    2.216151] systemd[1]: Mounted POSIX Message Queue File System.
>[    2.217709] systemd[1]: Mounted Huge Pages File System.
>[    2.220554] systemd[1]: Started Create static device nodes in /dev.
>[    2.222109] systemd[1]: Mounted Temporary Directory.
>[    2.222360] systemd[1]: Starting udev Kernel Device Manager...
>[    2.226837] systemd[1]: Starting Load legacy module configuration...
>[    2.229056] systemd-udevd[3288]: starting version 204
>[    2.231115] systemd[1]: Starting Setup Virtual Console...
>[    2.234751] systemd[1]: Starting Apply Kernel Variables...
>[    2.237331] systemd[1]: Started Load Kernel Modules.
>[    2.237361] systemd[1]: Mounted Configuration File System.
>[    2.237375] systemd[1]: Mounting FUSE Control File System...
>[    2.245229] systemd[1]: Started Set Up Additional Binary Formats.
>[    2.245259] systemd[1]: Started File System Check on Root Device.
>[    2.245285] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    2.252568] systemd[1]: Started udev Kernel Device Manager.
>[    2.253937] systemd[1]: Mounted FUSE Control File System.
>[    2.254069] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    2.258867] systemd[1]: Started udev Coldplug all Devices.
>[    2.261770] systemd[1]: Started Load legacy module configuration.
>[    2.263234] systemd[1]: Started Apply Kernel Variables.
>[    2.265688] systemd[1]: Started Setup Virtual Console.
>[    2.268108] systemd[1]: Started Remount Root and Kernel File Systems.
>[    2.268252] systemd[1]: Starting Configure read-only root support...
>[    2.270720] systemd[1]: Started Import network configuration from initramfs.
>[    2.270745] systemd[1]: Starting Local File Systems (Pre).
>[    2.274086] systemd[1]: Reached target Local File Systems (Pre).
>[    2.274164] systemd[1]: Starting Show Plymouth Boot Screen...
>[    2.276621] systemd[1]: Starting LVM2 metadata daemon...
>[    2.281830] systemd[1]: Started LVM2 metadata daemon.
>[    2.286305] systemd[1]: Started Configure read-only root support.
>[    2.286527] systemd[1]: Starting Load Random Seed...
>[    2.291190] systemd[1]: Starting Sound Card.
>[    2.292827] systemd[1]: Reached target Sound Card.
>[    2.293793] systemd[1]: Started Load Random Seed.
>[    2.315435] systemd-udevd[3357]: renamed network interface em1 to eno1
>[    2.328111] random: nonblocking pool is initialized
>[    2.344637] Adding 4095996k swap on /dev/sda2.  Priority:-1 extents:1 across:4095996k SS
>[    2.390431] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    2.406917] audit: type=1305 audit(1403594849.386:2): audit_pid=3405 old=0 auid=4294967295 ses=4294967295 res=1
>[    2.704622] Switched to clocksource tsc
>[    2.722904] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.727552] [drm:gen6_enable_rps] Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz
>[    2.845762] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    2.946708] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[    5.588016] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    5.588807] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
>[   38.673039] [drm:i915_gem_open] 
>[   38.673057] [drm:i915_gem_open] 
>[   38.673339] [drm:i915_gem_open] 
>[   38.673348] [drm:i915_gem_open] 
>[   38.673392] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.673396] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.673409] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.673411] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.673413] [drm:drm_mode_getconnector] [CONNECTOR:12:?]
>[   38.673415] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1]
>[   38.673417] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1
>[   38.673421] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[   38.673422] [drm:intel_crt_detect] CRT detected via hotplug
>[   38.698445] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.698450] Raw EDID:
>[   38.698453]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.698454]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.698456]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.698458]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.698460]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.698462]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.698463]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.698465]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710715] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.710718] Raw EDID:
>[   38.710720]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710722]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710723]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710725]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710727]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710729]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.710730]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.710732]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.722992] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.722994] Raw EDID:
>[   38.722996]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.722998]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.723000]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.723001]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.723003]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.723005]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.723007]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.723009]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735231] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.735233] Raw EDID:
>[   38.735235]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735236]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735238]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735240]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735242]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735243]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735245]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.735247]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.735251] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[   38.736197] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1)
>[   38.736202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   38.736206] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   38.736208] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   38.807314] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.807315] Raw EDID:
>[   38.807316]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.807317]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.807318]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.807319]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.807320]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.807320]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.807321]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.807322]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842172] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.842173] Raw EDID:
>[   38.842174]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842175]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842176]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842177]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842178]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842179]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.842179]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.842180]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877023] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.877024] Raw EDID:
>[   38.877025]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877026]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877027]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877027]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877028]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877029]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.877030]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.877031]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911877] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   38.911878] Raw EDID:
>[   38.911879]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911880]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911881]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911881]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911882]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911883]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911884]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   38.911885]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   38.911887] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[   38.912230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   38.912235] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   38.912245] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] probed modes :
>[   38.912249] [drm:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   38.912253] [drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   38.912255] [drm:drm_mode_debug_printmodeline] Modeline 22:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   38.912259] [drm:drm_mode_debug_printmodeline] Modeline 24:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[   38.912263] [drm:drm_mode_debug_printmodeline] Modeline 21:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[   38.912267] [drm:drm_mode_getconnector] [CONNECTOR:12:?]
>[   38.912277] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.912281] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.912293] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.912296] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.912300] [drm:drm_mode_getconnector] [CONNECTOR:15:?]
>[   38.912302] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[   38.912304] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[   38.912488] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   38.912490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   38.912492] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[   38.912496] [drm:drm_mode_getconnector] [CONNECTOR:15:?]
>[   38.912497] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[   38.912498] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[   38.912679] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   38.912682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   38.912684] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[   38.912691] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.912694] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.912696] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   38.912698] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   38.912700] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   38.912702] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   38.912704] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   38.912705] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   38.912706] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   38.912709] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   38.930241] PM: Syncing filesystems ... done.
>[   38.930795] PM: Preparing system for mem sleep
>[   38.930873] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[   38.931986] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[   38.933068] PM: Entering mem sleep
>[   38.933138] Suspending console(s) (use no_console_suspend to debug)
>[   38.933290] sd 2:0:0:0: [sda] Synchronizing SCSI cache
>[   38.933369] sd 2:0:0:0: [sda] Stopping disk
>[   38.967815] hpet1: lost 1 rtc interrupts
>[   38.968465] serial 00:03: disabled
>[   38.969297] ------------[ cut here ]------------
>[   38.969312] WARNING: CPU: 1 PID: 3819 at drivers/gpu/drm/i915/i915_irq.c:154 ironlake_disable_vblank+0x38/0x45 [i915]()
>[   38.969320] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr snd_hda_intel i2c_i801 snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore tpm_tis parport_pc parport tpm acpi_cpufreq i915 video button drm_kms_helper drm
>[   38.969322] CPU: 1 PID: 3819 Comm: kworker/u16:12 Not tainted 3.16.0-rc2_drm-intel-nightly_794975_20140624+ #3850
>[   38.969322] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   38.969325] Workqueue: events_unbound async_run_entry_fn
>[   38.969328]  c1a92d70 c16f4ae7 00000000 c10311b0 f81d4e82 00000080 f4f20000 f4f23ac8
>[   38.969329]  00000002 c10311d0 00000009 00000000 f81d4e82 00000000 f4ca9000 00000000
>[   38.969331]  00000000 f80928ca 00000286 00000286 00000000 00000000 f4ca9000 f4ca90ec
>[   38.969331] Call Trace:
>[   38.969335]  [<c16f4ae7>] ? dump_stack+0x3e/0x4e
>[   38.969337]  [<c10311b0>] ? warn_slowpath_common+0x65/0x78
>[   38.969345]  [<f81d4e82>] ? ironlake_disable_vblank+0x38/0x45 [i915]
>[   38.969346]  [<c10311d0>] ? warn_slowpath_null+0xd/0x10
>[   38.969353]  [<f81d4e82>] ? ironlake_disable_vblank+0x38/0x45 [i915]
>[   38.969358]  [<f80928ca>] ? vblank_disable_and_save+0x2b/0x156 [drm]
>[   38.969367]  [<f81ea26b>] ? intel_mark_fb_busy.part.34+0x29/0x52 [i915]
>[   38.969371]  [<f8092fac>] ? drm_vblank_off+0x27/0x10d [drm]
>[   38.969381]  [<f81f20c8>] ? ironlake_crtc_disable+0x30/0x6ef [i915]
>[   38.969384]  [<f80a217c>] ? drm_modeset_lock+0x2a/0x78 [drm]
>[   38.969390]  [<f81b320a>] ? i915_drm_freeze+0xae/0x12c [i915]
>[   38.969392]  [<c12f0ed3>] ? pci_pm_suspend+0x64/0xd3
>[   38.969393]  [<c12f0e6f>] ? pci_pm_freeze+0x88/0x88
>[   38.969396]  [<c136e102>] ? dpm_run_callback+0x43/0xa8
>[   38.969398]  [<c136ec8f>] ? __device_suspend+0x186/0x1e3
>[   38.969399]  [<c136ed00>] ? async_suspend+0x14/0x6b
>[   38.969400]  [<c1049da4>] ? async_run_entry_fn+0x56/0xfd
>[   38.969402]  [<c1041dc7>] ? process_one_work+0x191/0x2ea
>[   38.969404]  [<c104fac6>] ? try_to_wake_up+0x1e7/0x1f1
>[   38.969405]  [<c10424a1>] ? worker_thread+0x29d/0x384
>[   38.969407]  [<c1042204>] ? pool_mayday_timeout+0xb1/0xb1
>[   38.969408]  [<c1045dbe>] ? kthread+0xa1/0xa6
>[   38.969410]  [<c16f9921>] ? ret_from_kernel_thread+0x21/0x30
>[   38.969411]  [<c1045d1d>] ? kthread_freezable_should_stop+0x3b/0x3b
>[   38.969412] ---[ end trace bb5e729c616aa520 ]---
>[   38.969416] ------------[ cut here ]------------
>[   38.969424] WARNING: CPU: 1 PID: 3819 at drivers/gpu/drm/i915/i915_irq.c:423 intel_set_pch_fifo_underrun_reporting+0xc7/0x124 [i915]()
>[   38.969431] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr snd_hda_intel i2c_i801 snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore tpm_tis parport_pc parport tpm acpi_cpufreq i915 video button drm_kms_helper drm
>[   38.969432] CPU: 1 PID: 3819 Comm: kworker/u16:12 Tainted: G        W     3.16.0-rc2_drm-intel-nightly_794975_20140624+ #3850
>[   38.969433] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   38.969434] Workqueue: events_unbound async_run_entry_fn
>[   38.969435]  c1a92d70 c16f4ae7 00000000 c10311b0 f81d6835 f4f20000 00000000 00000001
>[   38.969437]  f4ca9000 c10311d0 00000009 00000000 f81d6835 00000200 f4f23ac8 00000282
>[   38.969439]  f4f20000 f4ca91e4 f582d000 f4ca91e0 f81f2112 f80a217c f582f000 f4ef4880
>[   38.969439] Call Trace:
>[   38.969440]  [<c16f4ae7>] ? dump_stack+0x3e/0x4e
>[   38.969441]  [<c10311b0>] ? warn_slowpath_common+0x65/0x78
>[   38.969448]  [<f81d6835>] ? intel_set_pch_fifo_underrun_reporting+0xc7/0x124 [i915]
>[   38.969449]  [<c10311d0>] ? warn_slowpath_null+0xd/0x10
>[   38.969456]  [<f81d6835>] ? intel_set_pch_fifo_underrun_reporting+0xc7/0x124 [i915]
>[   38.969464]  [<f81f2112>] ? ironlake_crtc_disable+0x7a/0x6ef [i915]
>[   38.969467]  [<f80a217c>] ? drm_modeset_lock+0x2a/0x78 [drm]
>[   38.969473]  [<f81b320a>] ? i915_drm_freeze+0xae/0x12c [i915]
>[   38.969474]  [<c12f0ed3>] ? pci_pm_suspend+0x64/0xd3
>[   38.969475]  [<c12f0e6f>] ? pci_pm_freeze+0x88/0x88
>[   38.969476]  [<c136e102>] ? dpm_run_callback+0x43/0xa8
>[   38.969477]  [<c136ec8f>] ? __device_suspend+0x186/0x1e3
>[   38.969479]  [<c136ed00>] ? async_suspend+0x14/0x6b
>[   38.969480]  [<c1049da4>] ? async_run_entry_fn+0x56/0xfd
>[   38.969481]  [<c1041dc7>] ? process_one_work+0x191/0x2ea
>[   38.969482]  [<c104fac6>] ? try_to_wake_up+0x1e7/0x1f1
>[   38.969484]  [<c10424a1>] ? worker_thread+0x29d/0x384
>[   38.969485]  [<c1042204>] ? pool_mayday_timeout+0xb1/0xb1
>[   38.969486]  [<c1045dbe>] ? kthread+0xa1/0xa6
>[   38.969487]  [<c16f9921>] ? ret_from_kernel_thread+0x21/0x30
>[   38.969488]  [<c1045d1d>] ? kthread_freezable_should_stop+0x3b/0x3b
>[   38.969489] ---[ end trace bb5e729c616aa521 ]---
>[   38.989278] ------------[ cut here ]------------
>[   38.989303] WARNING: CPU: 3 PID: 3819 at drivers/gpu/drm/i915/i915_irq.c:423 intel_set_pch_fifo_underrun_reporting+0x10d/0x124 [i915]()
>[   38.989318] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr snd_hda_intel i2c_i801 snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore tpm_tis parport_pc parport tpm acpi_cpufreq i915 video button drm_kms_helper drm
>[   38.989321] CPU: 3 PID: 3819 Comm: kworker/u16:12 Tainted: G        W     3.16.0-rc2_drm-intel-nightly_794975_20140624+ #3850
>[   38.989330] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   38.989331] Workqueue: events_unbound async_run_entry_fn
>[   38.989333]  c1a92d70 c16f4ae7 00000000 c10311b0 f81d687b f4f20000 f582f000 00000000
>[   38.989335]  f4ca9000 c10311d0 00000009 00000000 f81d687b 000f0001 f4f23ac8 00000282
>[   38.989337]  f4f20000 000f0064 f582d000 00000000 f81f24d8 fffc043a f582f000 f4ef4880
>[   38.989337] Call Trace:
>[   38.989339]  [<c16f4ae7>] ? dump_stack+0x3e/0x4e
>[   38.989341]  [<c10311b0>] ? warn_slowpath_common+0x65/0x78
>[   38.989349]  [<f81d687b>] ? intel_set_pch_fifo_underrun_reporting+0x10d/0x124 [i915]
>[   38.989350]  [<c10311d0>] ? warn_slowpath_null+0xd/0x10
>[   38.989357]  [<f81d687b>] ? intel_set_pch_fifo_underrun_reporting+0x10d/0x124 [i915]
>[   38.989366]  [<f81f24d8>] ? ironlake_crtc_disable+0x440/0x6ef [i915]
>[   38.989372]  [<f81b320a>] ? i915_drm_freeze+0xae/0x12c [i915]
>[   38.989373]  [<c12f0ed3>] ? pci_pm_suspend+0x64/0xd3
>[   38.989374]  [<c12f0e6f>] ? pci_pm_freeze+0x88/0x88
>[   38.989376]  [<c136e102>] ? dpm_run_callback+0x43/0xa8
>[   38.989377]  [<c136ec8f>] ? __device_suspend+0x186/0x1e3
>[   38.989379]  [<c136ed00>] ? async_suspend+0x14/0x6b
>[   38.989380]  [<c1049da4>] ? async_run_entry_fn+0x56/0xfd
>[   38.989381]  [<c1041dc7>] ? process_one_work+0x191/0x2ea
>[   38.989383]  [<c104fac6>] ? try_to_wake_up+0x1e7/0x1f1
>[   38.989384]  [<c10424a1>] ? worker_thread+0x29d/0x384
>[   38.989385]  [<c1042204>] ? pool_mayday_timeout+0xb1/0xb1
>[   38.989386]  [<c1045dbe>] ? kthread+0xa1/0xa6
>[   38.989388]  [<c16f9921>] ? ret_from_kernel_thread+0x21/0x30
>[   38.989389]  [<c1045d1d>] ? kthread_freezable_should_stop+0x3b/0x3b
>[   38.989390] ---[ end trace bb5e729c616aa522 ]---
>[   38.989394] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 6
>[   38.989397] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[   38.989811] [drm:intel_update_fbc] no output, disabling
>[   39.047063] PM: suspend of devices complete after 113.817 msecs
>[   39.057382] PM: late suspend of devices complete after 10.312 msecs
>[   39.057733] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[   39.057804] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[   39.057993] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[   39.068329] PM: noirq suspend of devices complete after 10.939 msecs
>[   39.068973] ACPI: Preparing to enter system sleep state S3
>[   39.069110] PM: Saving platform NVS memory
>[   39.069944] Disabling non-boot CPUs ...
>[   39.071158] smpboot: CPU 1 is now offline
>[   39.072638] smpboot: CPU 2 is now offline
>[   39.074340] smpboot: CPU 3 is now offline
>[   39.075650] smpboot: CPU 4 is now offline
>[   39.077084] smpboot: CPU 5 is now offline
>[   39.077380] Broke affinity for irq 16
>[   39.078409] smpboot: CPU 6 is now offline
>[   39.079738] smpboot: CPU 7 is now offline
>[   39.080911] ACPI: Low-level resume complete
>[   39.080942] PM: Restoring platform NVS memory
>[   39.081489] CPU0: Thermal LVT vector (0xfa) already installed
>[   39.081495] Enabling non-boot CPUs ...
>[   39.081521] x86: Booting SMP configuration:
>[   39.081522] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[   39.091932] Initializing CPU#1
>[   39.092646] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[   39.092654] CPU1: Thermal LVT vector (0xfa) already installed
>[   39.094928] CPU1 is up
>[   39.094939] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[   39.105297] Initializing CPU#2
>[   39.106071] CPU2: Thermal LVT vector (0xfa) already installed
>[   39.108319] CPU2 is up
>[   39.108331] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[   39.118689] Initializing CPU#3
>[   39.119463] CPU3: Thermal LVT vector (0xfa) already installed
>[   39.121711] CPU3 is up
>[   39.121722] smpboot: Booting Node 0 Processor 4 APIC 0x1
>[   39.132138] Initializing CPU#4
>[   39.132859] CPU4: Thermal LVT vector (0xfa) already installed
>[   39.135119] CPU4 is up
>[   39.135131] smpboot: Booting Node 0 Processor 5 APIC 0x3
>[   39.145489] Initializing CPU#5
>[   39.146262] CPU5: Thermal LVT vector (0xfa) already installed
>[   39.148526] CPU5 is up
>[   39.148538] smpboot: Booting Node 0 Processor 6 APIC 0x5
>[   39.158895] Initializing CPU#6
>[   39.159669] CPU6: Thermal LVT vector (0xfa) already installed
>[   39.161936] CPU6 is up
>[   39.161947] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[   39.172305] Initializing CPU#7
>[   39.173078] CPU7: Thermal LVT vector (0xfa) already installed
>[   39.175352] CPU7 is up
>[   39.180938] ACPI: Waking up from system sleep state S3
>[   39.192146] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[   39.192162] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[   39.192204] PM: noirq resume of devices complete after 10.948 msecs
>[   39.192379] PM: early resume of devices complete after 0.128 msecs
>[   39.192577] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[   39.193607] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[   39.193915] [drm:intel_opregion_setup] graphic opregion physical addr: 0xcaf7a018
>[   39.193921] [drm:intel_opregion_setup] SWSCI supported
>[   39.193963] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[   39.194004] serial 00:03: activated
>[   39.199899] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[   39.199901] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[   39.199903] [drm:ironlake_init_pch_refclk] Disabling SSC entirely
>[   39.200310] [drm:intel_crt_reset] pch crt adpa set to 0xf40000
>[   39.200313] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[   39.200325] [drm:init_status_page] bsd ring hws offset: 0x00163000
>[   39.200336] [drm:init_status_page] blitter ring hws offset: 0x00184000
>[   39.200376] [drm] Wrong MCH_SSKPD value: 0x16040307
>[   39.200376] [drm] This can cause pipe underruns and display issues.
>[   39.200377] [drm] Please upgrade your BIOS to fix this.
>[   39.200379] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: disabled
>[   39.200381] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[   39.200385] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 0, on 0
>[   39.200390] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[   39.200393] [drm:intel_modeset_readout_hw_state] [ENCODER:13:DAC-13] hw state readout: disabled, pipe A
>[   39.200395] [drm:intel_modeset_readout_hw_state] [ENCODER:14:TMDS-14] hw state readout: disabled, pipe A
>[   39.200398] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[   39.200400] [drm:intel_modeset_readout_hw_state] [CONNECTOR:12:VGA-1] hw state readout: disabled
>[   39.200403] [drm:intel_modeset_readout_hw_state] [CONNECTOR:15:HDMI-A-1] hw state readout: disabled
>[   39.200405] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled
>[   39.200407] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[   39.200408] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[   39.200408] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[   39.200410] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[   39.200411] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   39.200412] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   39.200413] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   39.200414] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   39.200415] [drm:intel_dump_pipe_config] requested mode:
>[   39.200417] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   39.200418] [drm:intel_dump_pipe_config] adjusted mode:
>[   39.200419] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   39.200421] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   39.200422] [drm:intel_dump_pipe_config] port clock: 0
>[   39.200422] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   39.200424] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   39.200425] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   39.200425] [drm:intel_dump_pipe_config] ips: 0
>[   39.200426] [drm:intel_dump_pipe_config] double wide: 0
>[   39.200427] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[   39.200427] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[   39.200428] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[   39.200429] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[   39.200430] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   39.200431] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   39.200432] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   39.200433] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   39.200434] [drm:intel_dump_pipe_config] requested mode:
>[   39.200435] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   39.200436] [drm:intel_dump_pipe_config] adjusted mode:
>[   39.200438] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   39.200439] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   39.200440] [drm:intel_dump_pipe_config] port clock: 0
>[   39.200441] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   39.200442] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   39.200443] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   39.200443] [drm:intel_dump_pipe_config] ips: 0
>[   39.200444] [drm:intel_dump_pipe_config] double wide: 0
>[   39.200447] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   39.200449] [drm:connected_sink_compute_bpp] [CONNECTOR:12:VGA-1] checking for sink bpp constrains
>[   39.200450] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[   39.200452] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   39.200452] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[   39.200453] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   39.200454] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   39.200456] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
>[   39.200457] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   39.200457] [drm:intel_dump_pipe_config] requested mode:
>[   39.200459] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   39.200460] [drm:intel_dump_pipe_config] adjusted mode:
>[   39.200462] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   39.200464] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[   39.200464] [drm:intel_dump_pipe_config] port clock: 65000
>[   39.200465] [drm:intel_dump_pipe_config] pipe src size: 1024x768
>[   39.200466] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   39.200467] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   39.200468] [drm:intel_dump_pipe_config] ips: 0
>[   39.200468] [drm:intel_dump_pipe_config] double wide: 0
>[   39.200491] [drm:intel_get_shared_dpll] CRTC:6 allocated PCH DPLL A
>[   39.200492] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[   39.200493] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[   39.200501] [drm:ironlake_update_primary_plane] Writing base 001A6000 00000000 0 0 4096
>[   39.201847] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100
>[   39.201849] [drm:gen6_fdi_link_train] FDI train 1 done.
>[   39.202504] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x200
>[   39.202505] [drm:gen6_fdi_link_train] FDI train 2 done.
>[   39.202506] [drm:gen6_fdi_link_train] FDI train done.
>[   39.202509] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0)for crtc 6
>[   39.202510] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[   39.202947] sd 2:0:0:0: [sda] Starting disk
>[   39.204382] [drm:intel_update_fbc] disabled per chip default
>[   39.204385] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   39.204388] [drm:intel_connector_check_state] [CONNECTOR:12:VGA-1]
>[   39.204392] [drm:check_encoder_state] [ENCODER:13:DAC-13]
>[   39.204394] [drm:check_encoder_state] [ENCODER:14:TMDS-14]
>[   39.204395] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[   39.204397] [drm:check_crtc_state] [CRTC:6]
>[   39.204408] [drm:check_crtc_state] [CRTC:10]
>[   39.204408] [drm:check_shared_dpll_state] PCH DPLL A
>[   39.204412] [drm:check_shared_dpll_state] PCH DPLL B
>[   39.204418] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=0
>[   39.204420] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x80f40000
>[   39.212826] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00080000
>[   39.212827] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 1 - cnt: 0
>[   39.213908] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[   39.213909] [drm:intel_crt_detect] CRT detected via hotplug
>[   39.213911] [drm:drm_helper_hpd_irq_event] [CONNECTOR:12:VGA-1] status updated from unknown to connected
>[   39.213912] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[   39.214068] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   39.214070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   39.214073] [drm:drm_helper_hpd_irq_event] [CONNECTOR:15:HDMI-A-1] status updated from unknown to disconnected
>[   39.214076] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   39.214079] [drm:drm_helper_hpd_irq_event] [CONNECTOR:19:DP-1] status updated from unknown to disconnected
>[   39.214083] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[   39.214085] [drm:i915_hotplug_work_func] Connector VGA-1 (pin 1) received hotplug event.
>[   39.214087] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=0
>[   39.214090] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[   39.214091] [drm:intel_crt_detect] CRT detected via hotplug
>[   39.314602] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[   39.375612] PM: resume of devices complete after 183.146 msecs
>[   39.397265] PM: Finishing wakeup.
>[   39.397266] Restarting tasks ... done.
>[   39.397402] video LNXVIDEO:00: Restoring backlight state
>[   39.398050] [drm:add_framebuffer_internal] [FB:28]
>[   39.508073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[   39.510072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   39.511180] ata2.00: configured for UDMA/100
>[   39.527522] ata3.00: configured for UDMA/133
>[   39.532490] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.532495] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.532498] [drm:drm_mode_getconnector] [CONNECTOR:12:?]
>[   39.532500] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1]
>[   39.532502] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1
>[   39.532505] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[   39.532506] [drm:intel_crt_detect] CRT detected via hotplug
>[   39.557477] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.557482] Raw EDID:
>[   39.557485]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.557487]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.557488]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.557490]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.557492]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.557494]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.557495]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.557497]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569721] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.569724] Raw EDID:
>[   39.569726]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569727]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569729]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569731]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569733]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569734]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.569736]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.569738]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581954] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.581956] Raw EDID:
>[   39.581958]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581960]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581962]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581963]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581965]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581967]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.581969]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.581971]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594186] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.594189] Raw EDID:
>[   39.594191]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594193]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594194]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594196]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594198]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594200]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594202]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.594203]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.594208] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[   39.595137] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1)
>[   39.595143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   39.595146] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   39.595149] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   39.666041] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.666042] Raw EDID:
>[   39.666043]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.666044]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.666045]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.666045]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.666046]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.666047]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.666048]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.666049]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700896] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.700897] Raw EDID:
>[   39.700898]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700898]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700899]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700900]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700901]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700902]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.700903]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.700903]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735751] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.735752] Raw EDID:
>[   39.735753]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735754]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735754]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735755]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735756]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735757]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.735758]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.735759]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770595] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193
>[   39.770596] Raw EDID:
>[   39.770597]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770598]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770598]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770599]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770600]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770601]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770602]  	ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff
>[   39.770603]  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   39.770604] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1.
>[   39.770943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   39.770945] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   39.770951] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] probed modes :
>[   39.770953] [drm:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   39.770955] [drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   39.770957] [drm:drm_mode_debug_printmodeline] Modeline 22:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   39.770959] [drm:drm_mode_debug_printmodeline] Modeline 24:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[   39.770960] [drm:drm_mode_debug_printmodeline] Modeline 21:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[   39.770963] [drm:drm_mode_getconnector] [CONNECTOR:12:?]
>[   39.770969] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.770971] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.770976] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.770977] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.770979] [drm:drm_mode_getconnector] [CONNECTOR:15:?]
>[   39.770980] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[   39.770982] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[   39.771176] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   39.771191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   39.771201] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[   39.771215] [drm:drm_mode_getconnector] [CONNECTOR:15:?]
>[   39.771223] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1]
>[   39.771229] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1]
>[   39.771416] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   39.771418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   39.771420] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected
>[   39.771426] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.771429] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   39.771431] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   39.771432] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   39.771434] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   39.771436] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   39.771438] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   39.771439] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1]
>[   39.771440] [drm:intel_dp_detect] [CONNECTOR:19:DP-1]
>[   39.771442] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected
>[   39.771521] [drm:intel_crtc_set_config] [CRTC:6] [FB:27] #connectors=1 (x y) (0 0)
>[   39.771523] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   39.771524] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[   39.771525] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   39.771526] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   39.771527] [drm:intel_modeset_stage_output_state] [CONNECTOR:12:VGA-1] to [CRTC:6]
>[   40.729649] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   40.733627] [drm:gen6_enable_rps] Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz
>[   41.988459] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[   41.989279] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO

Actions: View

Attachments on bug 80376: 101553 | 101644 | 101646 | 102731

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.