Attachment 101996 Details for Bug 80702 – dmesg

dmesg

dmesg_ivb_0630.txt (text/plain), 91.21 KB, created by lu hua on 2014-06-30 06:23:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-06-30 06:23:00 UTC

Size: 91.21 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #66 SMP Mon Jun 30 11:30:29 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_06_30/drm-intel-nightly/1087d4bf01e79523898c6c31615bf0c369e0039a/bzImage_x86_64_debug root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_06_30/drm-intel-nightly/1087d4bf01e79523898c6c31615bf0c369e0039a/modules_x86_64_debug/lib/modules/3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000091bff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9b4afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d9b4b000-0x00000000da170fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000da171000-0x00000000da3d7fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000da3d8000-0x00000000da3e3fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000da3e4000-0x00000000da3f0fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000da3f1000-0x00000000da3f5fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000da3f6000-0x00000000da438fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000da439000-0x00000000daffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Dell Inc. OptiPlex 9010/03JR84, BIOS A01 05/04/2012
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-DBFFF write-protect
>[    0.000000]   DC000-E7FFF uncachable
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F00000000 write-back
>[    0.000000]   1 base 100000000 mask FE0000000 write-back
>[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
>[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
>[    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
>[    0.000000]   5 base 11F000000 mask FFF000000 uncachable
>[    0.000000]   6 base 11E800000 mask FFF800000 uncachable
>[    0.000000]   7 base 11E600000 mask FFFE00000 uncachable
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fce10-0x000fce1f] mapped at [ffff8800000fce10]
>[    0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x046d6000, 0x046d6fff] PGTABLE
>[    0.000000] BRK [0x046d7000, 0x046d7fff] PGTABLE
>[    0.000000] BRK [0x046d8000, 0x046d8fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x11e400000-0x11e5fffff]
>[    0.000000]  [mem 0x11e400000-0x11e5fffff] page 2M
>[    0.000000] BRK [0x046d9000, 0x046d9fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11e3fffff]
>[    0.000000]  [mem 0x11c000000-0x11e3fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
>[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
>[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
>[    0.000000] BRK [0x046da000, 0x046dafff] PGTABLE
>[    0.000000] BRK [0x046db000, 0x046dbfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x40005000-0xd9b4afff]
>[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
>[    0.000000]  [mem 0x40200000-0xd99fffff] page 2M
>[    0.000000]  [mem 0xd9a00000-0xd9b4afff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xda439000-0xdaffffff]
>[    0.000000]  [mem 0xda439000-0xda5fffff] page 4k
>[    0.000000]  [mem 0xda600000-0xdaffffff] page 2M
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 0x00000000DA3D8078 000074 (v01 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000DA3E1AC8 0000F4 (v04 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000DA3D8180 009944 (v02 DELL   CBX3     00000117 INTL 20091112)
>[    0.000000] ACPI: FACS 0x00000000DA3EFF80 000040
>[    0.000000] ACPI: APIC 0x00000000DA3E1BC0 000072 (v03 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 0x00000000DA3E1C38 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000DA3E1C78 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000DA3E1CB0 000386 (v01 SataRe SataTabl 00001000 INTL 20091112)
>[    0.000000] ACPI: SSDT 0x00000000DA3E2038 0009B9 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
>[    0.000000] ACPI: SSDT 0x00000000DA3E29F8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
>[    0.000000] ACPI: DMAR 0x00000000DA3E3490 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
>[    0.000000] ACPI: ASF! 0x00000000DA3E3548 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: SLIC 0x00000000DA3E35F0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11e5fffff]
>[    0.000000]   NODE_DATA [mem 0x11e5f8000-0x11e5fbfff]
>[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880119c00000-ffff88011dbfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x11e5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00090fff]
>[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
>[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
>[    0.000000]   node   0: [mem 0x40005000-0xd9b4afff]
>[    0.000000]   node   0: [mem 0xda439000-0xdaffffff]
>[    0.000000]   node   0: [mem 0x100000000-0x11e5fffff]
>[    0.000000] On node 0 totalpages: 1018529
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3984 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13909 pages used for memmap
>[    0.000000]   DMA32 zone: 890129 pages, LIFO batch:31
>[    0.000000]   Normal zone: 1944 pages used for memmap
>[    0.000000]   Normal zone: 124416 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd9b4b000-0xda170fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda171000-0xda3d7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda3d8000-0xda3e3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda3e4000-0xda3f0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda3f1000-0xda3f5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda3f6000-0xda438fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011e200000 s81664 r8192 d20736 u524288
>[    0.000000] pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1002591
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_06_30/drm-intel-nightly/1087d4bf01e79523898c6c31615bf0c369e0039a/bzImage_x86_64_debug root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_06_30/drm-intel-nightly/1087d4bf01e79523898c6c31615bf0c369e0039a/modules_x86_64_debug/lib/modules/3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3885512K/4074116K available (8427K kernel code, 1017K rwdata, 4768K rodata, 24964K init, 13740K bss, 188604K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:4352 nr_irqs:712 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
>[    0.000000] ... MAX_LOCK_DEPTH:          48
>[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
>[    0.000000] ... CLASSHASH_SIZE:          4096
>[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
>[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
>[    0.000000] ... CHAINHASH_SIZE:          32768
>[    0.000000]  memory used by lock dependency info: 8159 kB
>[    0.000000]  per task-struct memory footprint: 1920 bytes
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3292.717 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.43 BogoMIPS (lpj=3292717)
>[    0.000203] pid_max: default: 32768 minimum: 301
>[    0.000329] ACPI: Core revision 20140424
>[    0.097760] ACPI: All ACPI Tables successfully acquired
>[    0.098189] Security Framework initialized
>[    0.098810] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.099961] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.100479] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.100605] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.102403] CPU: Physical Processor ID: 0
>[    0.102505] CPU: Processor Core ID: 0
>[    0.102883] mce: CPU supports 9 MCE banks
>[    0.102992] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.103004] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 2
>[    0.103389] Freeing SMP alternatives memory: 32K (ffffffff83961000 - ffffffff83969000)
>[    0.103541] ftrace: allocating 33685 entries in 132 pages
>[    0.116064] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.126169] smpboot: CPU0: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09)
>[    0.126462] TSC deadline timer enabled
>[    0.126505] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
>[    0.126885] ... version:                3
>[    0.126985] ... bit width:              48
>[    0.128248] ... generic registers:      8
>[    0.128348] ... value mask:             0000ffffffffffff
>[    0.128448] ... max period:             0000ffffffffffff
>[    0.128547] ... fixed-purpose events:   3
>[    0.128644] ... event mask:             00000007000000ff
>[    0.130234] x86: Booting SMP configuration:
>[    0.130360] .... node  #0, CPUs:      #1
>[    0.141810] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.148371] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.148948]  #2
>[    0.160312] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.162778]  #3
>[    0.174237] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.176428] x86: Booted up 1 node, 4 CPUs
>[    0.176531] smpboot: Total of 4 processors activated (26341.73 BogoMIPS)
>[    0.179875] devtmpfs: initialized
>[    0.181236] PM: Registering ACPI NVS region [mem 0xda171000-0xda3d7fff] (2519040 bytes)
>[    0.182388] PM: Registering ACPI NVS region [mem 0xda3e4000-0xda3f0fff] (53248 bytes)
>[    0.182561] PM: Registering ACPI NVS region [mem 0xda3f6000-0xda438fff] (274432 bytes)
>[    0.184492] xor: automatically using best checksumming function:
>[    0.193737]    avx       : 24920.000 MB/sec
>[    0.193871] RTC time: 18:48:23, date: 06/30/14
>[    0.194311] NET: Registered protocol family 16
>[    0.195524] cpuidle: using governor ladder
>[    0.195635] cpuidle: using governor menu
>[    0.195929] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.196087] ACPI: bus type PCI registered
>[    0.196734] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.196898] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.197063] PCI: Using configuration type 1 for base access
>[    0.197169] dmi type 0xB1 record - unknown flag
>[    0.245006] raid6: sse2x1    8835 MB/s
>[    0.262037] raid6: sse2x2   11074 MB/s
>[    0.279070] raid6: sse2x4   12531 MB/s
>[    0.279170] raid6: using algorithm sse2x4 (12531 MB/s)
>[    0.279269] raid6: using ssse3x2 recovery algorithm
>[    0.279538] ACPI: Added _OSI(Module Device)
>[    0.279639] ACPI: Added _OSI(Processor Device)
>[    0.279738] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.279837] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.290507] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.339358] ACPI: Dynamic OEM Table Load:
>[    0.339556] ACPI: SSDT 0xFFFF880118546000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
>[    0.352095] ACPI: Dynamic OEM Table Load:
>[    0.352295] ACPI: SSDT 0xFFFF88011851AC00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
>[    0.362973] ACPI: Dynamic OEM Table Load:
>[    0.363168] ACPI: SSDT 0xFFFF880118736800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
>[    0.379938] ACPI: Interpreter enabled
>[    0.380047] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.380297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.380594] ACPI: (supports S0 S3 S4 S5)
>[    0.380694] ACPI: Using IOAPIC for interrupt routing
>[    0.380978] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.513068] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.513192] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.515491] \_SB_.PCI0:_OSC invalid UUID
>[    0.515500] _OSC request data:1 1f 0 
>[    0.515508] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.525775] PCI host bridge to bus 0000:00
>[    0.525881] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.525990] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.526102] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.526210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.526320] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>[    0.526428] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>[    0.526536] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>[    0.526646] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
>[    0.526787] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
>[    0.527866] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
>[    0.527881] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
>[    0.527889] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.527895] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.528967] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
>[    0.528997] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
>[    0.529082] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.529824] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.530430] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
>[    0.530459] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c00f 64bit]
>[    0.530551] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.531574] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
>[    0.531598] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
>[    0.531609] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3a000-0xf7c3afff]
>[    0.532688] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.532711] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
>[    0.532723] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff]
>[    0.532734] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
>[    0.532810] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.533482] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.534029] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
>[    0.534056] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff]
>[    0.534193] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.534883] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.535502] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
>[    0.535525] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
>[    0.535625] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.536296] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.536847] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
>[    0.536873] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff]
>[    0.536979] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.537706] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.538256] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.538979] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.539564] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
>[    0.540702] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
>[    0.540726] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
>[    0.540737] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
>[    0.540747] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
>[    0.540758] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
>[    0.540768] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.540779] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff]
>[    0.540835] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.541893] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
>[    0.541914] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit]
>[    0.541940] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.543290] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
>[    0.543408] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.543414] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.543420] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.543425] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>[    0.543431] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>[    0.543436] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
>[    0.543442] pci 0000:00:1e.0:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
>[    0.549460] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.550904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.552394] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.553726] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.555083] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
>[    0.556498] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.557960] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled.
>[    0.559332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.560876] ACPI: Enabled 4 GPEs in block 00 to 3F
>[    0.561705] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.561864] vgaarb: loaded
>[    0.561961] vgaarb: bridge control possible 0000:00:02.0
>[    0.562682] SCSI subsystem initialized
>[    0.562962] libata version 3.00 loaded.
>[    0.563218] ACPI: bus type USB registered
>[    0.563517] usbcore: registered new interface driver usbfs
>[    0.563710] usbcore: registered new interface driver hub
>[    0.563897] usbcore: registered new device driver usb
>[    0.564191] pps_core: LinuxPPS API ver. 1 registered
>[    0.564294] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.564538] PTP clock support registered
>[    0.564893] PCI: Using ACPI for IRQ routing
>[    0.566801] PCI: pci_cache_line_size set to 64 bytes
>[    0.566851] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
>[    0.566861] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
>[    0.566866] e820: reserve RAM buffer [mem 0xd9b4b000-0xdbffffff]
>[    0.566871] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
>[    0.566876] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
>[    0.568020] NetLabel: Initializing
>[    0.568118] NetLabel:  domain hash size = 128
>[    0.568215] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.568484] NetLabel:  unlabeled traffic allowed by default
>[    0.568677] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.569164] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.571323] Switched to clocksource hpet
>[    0.605148] pnp: PnP ACPI init
>[    0.605352] ACPI: bus type PNP registered
>[    0.605936] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.606080] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.606670] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.606791] system 00:01: [io  0x0200-0x020f] has been reserved
>[    0.606906] system 00:01: [io  0xffff] has been reserved
>[    0.607017] system 00:01: [io  0xffff] has been reserved
>[    0.607130] system 00:01: [io  0x0400-0x0453] could not be reserved
>[    0.607244] system 00:01: [io  0x0458-0x047f] has been reserved
>[    0.607375] system 00:01: [io  0x0500-0x057f] has been reserved
>[    0.607487] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.607595] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.607851] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.608334] system 00:03: [io  0x0454-0x0457] has been reserved
>[    0.608449] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.609628] system 00:04: [io  0x0a40-0x0a4f] has been reserved
>[    0.609747] system 00:04: [io  0x0a00-0x0a3f] has been reserved
>[    0.609852] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.610308] system 00:05: [io  0x04d0-0x04d1] has been reserved
>[    0.610434] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.619294] pnp 00:06: [dma 0 disabled]
>[    0.619653] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.622229] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.622366] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.622481] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.622593] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.622708] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.622822] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.622936] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.623050] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.623164] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
>[    0.623281] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.623412] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
>[    0.623522] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.625577] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
>[    0.625698] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
>[    0.625806] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.625876] pnp: PnP ACPI: found 9 devices
>[    0.625975] ACPI: bus type PNP unregistered
>[    0.644483] pci 0000:00:1e.0: PCI bridge to [bus 01]
>[    0.644606] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.644609] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.644611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.644613] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
>[    0.644615] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
>[    0.644617] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
>[    0.644619] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xfeafffff]
>[    0.644622] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
>[    0.644624] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
>[    0.644626] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.644628] pci_bus 0000:01: resource 7 [mem 0x000dc000-0x000dffff]
>[    0.644630] pci_bus 0000:01: resource 8 [mem 0x000e0000-0x000e3fff]
>[    0.644632] pci_bus 0000:01: resource 9 [mem 0x000e4000-0x000e7fff]
>[    0.644634] pci_bus 0000:01: resource 10 [mem 0xdfa00000-0xfeafffff]
>[    0.644777] NET: Registered protocol family 2
>[    0.645565] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.646015] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
>[    0.647500] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.647651] TCP: reno registered
>[    0.647805] UDP hash table entries: 2048 (order: 6, 327680 bytes)
>[    0.648125] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
>[    0.648743] NET: Registered protocol family 1
>[    0.649212] RPC: Registered named UNIX socket transport module.
>[    0.649338] RPC: Registered udp transport module.
>[    0.649438] RPC: Registered tcp transport module.
>[    0.649536] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.649669] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
>[    0.649828] pci 0000:00:02.0: Boot video device
>[    0.655612] PCI: CLS 64 bytes, default 64
>[    1.124062] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.124173] software IO TLB [mem 0xd5b4b000-0xd9b4b000] (64MB) mapped at [ffff8800d5b4b000-ffff8800d9b4afff]
>[    1.126002] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>[    1.130278] futex hash table entries: 1024 (order: 5, 131072 bytes)
>[    1.130575] audit: initializing netlink subsys (disabled)
>[    1.130728] audit: type=2000 audit(1404154104.116:1): initialized
>[    1.132522] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.155169] VFS: Disk quotas dquot_6.5.2
>[    1.155771] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.163417] NFS: Registering the id_resolver key type
>[    1.163581] Key type id_resolver registered
>[    1.163687] Key type id_legacy registered
>[    1.163795] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.167129] fuse init (API version 7.23)
>[    1.168158] msgmni has been set to 7588
>[    1.169592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.169773] io scheduler noop registered
>[    1.169874] io scheduler deadline registered
>[    1.170296] io scheduler cfq registered (default)
>[    1.170887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.183896] Monitor-Mwait will be used to enter C-1 state
>[    1.183908] Monitor-Mwait will be used to enter C-2 state
>[    1.183913] Monitor-Mwait will be used to enter C-3 state
>[    1.183938] ACPI: acpi_idle registered with cpuidle
>[    1.201222] ACPI: Invalid active0 threshold
>[    1.202606] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.202711] ACPI: Thermal Zone [TZ00] (28 C)
>[    1.206155] thermal LNXTHERM:01: registered as thermal_zone1
>[    1.206259] ACPI: Thermal Zone [TZ01] (30 C)
>[    1.206730] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.227908] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.253266] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
>[    1.255079] Non-volatile memory driver v1.3
>[    1.255203] Linux agpgart interface v0.103
>[    1.268689] brd: module loaded
>[    1.269260] Loading iSCSI transport class v2.0-870.
>[    1.270231] iscsi: registered transport (tcp)
>[    1.270858] Adaptec aacraid driver 1.2-0[30300]-ms
>[    1.271097] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.271670] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    1.272066] iscsi: registered transport (qla4xxx)
>[    1.272280] QLogic iSCSI HBA Driver
>[    1.272648] DC390: clustering now enabled by default. If you get problems load
>[    1.272823]        with "disable_clustering=1" and report to maintainers
>[    1.273100] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.273441] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.273625] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.273966] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.274190] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.274936] SCSI Media Changer driver v0.25 
>[    1.275198] ahci 0000:00:1f.2: version 3.0
>[    1.276550] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>[    1.276677] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
>[    1.276827] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[    1.286071] scsi0 : ahci
>[    1.287113] scsi1 : ahci
>[    1.287976] scsi2 : ahci
>[    1.288865] scsi3 : ahci
>[    1.289750] scsi4 : ahci
>[    1.290689] scsi5 : ahci
>[    1.291382] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100 irq 40
>[    1.291535] ata2: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36180 irq 40
>[    1.291682] ata3: DUMMY
>[    1.291775] ata4: DUMMY
>[    1.291868] ata5: DUMMY
>[    1.291960] ata6: DUMMY
>[    1.298045] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    1.298336] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    1.298911] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.299028] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.299233] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.299395] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.299608] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.299720] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    1.301111] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.301327] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    1.503975] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.504092] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:f9:dd:71:a3:0d
>[    1.504242] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.504400] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1011FF-0FF
>[    1.504601] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.504722] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.505000] usbcore: registered new interface driver catc
>[    1.505175] usbcore: registered new interface driver kaweth
>[    1.505312] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.505518] usbcore: registered new interface driver pegasus
>[    1.505696] usbcore: registered new interface driver rtl8150
>[    1.505910] usbcore: registered new interface driver asix
>[    1.506080] usbcore: registered new interface driver ax88179_178a
>[    1.506257] usbcore: registered new interface driver cdc_ether
>[    1.506455] usbcore: registered new interface driver dm9601
>[    1.506631] usbcore: registered new interface driver gl620a
>[    1.506813] usbcore: registered new interface driver net1080
>[    1.506988] usbcore: registered new interface driver plusb
>[    1.507165] usbcore: registered new interface driver rndis_host
>[    1.507358] usbcore: registered new interface driver cdc_subset
>[    1.507537] usbcore: registered new interface driver zaurus
>[    1.507716] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.507987] usbcore: registered new interface driver cdc_ncm
>[    1.508585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.508704] ehci-pci: EHCI PCI platform driver
>[    1.510002] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    1.510738] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    1.510946] ehci-pci 0000:00:1a.0: debug port 2
>[    1.515004] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    1.515096] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000
>[    1.520363] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.520843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.520957] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.521102] usb usb1: Product: EHCI Host Controller
>[    1.521202] usb usb1: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+ ehci_hcd
>[    1.521375] usb usb1: SerialNumber: 0000:00:1a.0
>[    1.522894] hub 1-0:1.0: USB hub found
>[    1.523054] hub 1-0:1.0: 3 ports detected
>[    1.526561] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.527014] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.527203] ehci-pci 0000:00:1d.0: debug port 2
>[    1.531239] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.531327] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000
>[    1.537387] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.537724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.537832] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.537978] usb usb2: Product: EHCI Host Controller
>[    1.538077] usb usb2: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+ ehci_hcd
>[    1.538229] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.539455] hub 2-0:1.0: USB hub found
>[    1.539612] hub 2-0:1.0: 3 ports detected
>[    1.541725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.541854] ohci-pci: OHCI PCI platform driver
>[    1.542035] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.543501] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.543967] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.544340] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.544416] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
>[    1.544763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.544870] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.545015] usb usb3: Product: xHCI Host Controller
>[    1.545115] usb usb3: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+ xhci_hcd
>[    1.545266] usb usb3: SerialNumber: 0000:00:14.0
>[    1.546542] hub 3-0:1.0: USB hub found
>[    1.546717] hub 3-0:1.0: 4 ports detected
>[    1.554030] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.554489] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    1.554921] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.555029] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.555176] usb usb4: Product: xHCI Host Controller
>[    1.555274] usb usb4: Manufacturer: Linux 3.16.0-rc2_drm-intel-nightly_1087d4_20140630_debug+ xhci_hcd
>[    1.555481] usb usb4: SerialNumber: 0000:00:14.0
>[    1.556787] hub 4-0:1.0: USB hub found
>[    1.556953] hub 4-0:1.0: 4 ports detected
>[    1.564449] usbcore: registered new interface driver usb-storage
>[    1.564731] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.567758] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.567892] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.568908] mousedev: PS/2 mouse device common for all mice
>[    1.569641] rtc_cmos 00:02: RTC can wake from S4
>[    1.570341] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.570508] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.570697] i2c /dev entries driver
>[    1.570966] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.572508] usbcore: registered new interface driver usbhid
>[    1.572624] usbhid: USB HID core driver
>[    1.572836] TCP: cubic registered
>[    1.572948] Initializing XFRM netlink socket
>[    1.573074] NET: Registered protocol family 17
>[    1.573285] Key type dns_resolver registered
>[    1.575554] registered taskstats version 1
>[    1.575822] kmemleak: Kernel memory leak detector initialized
>[    1.575852] kmemleak: Automatic memory scanning thread started
>[    1.580122] Btrfs loaded
>[    1.581434]   Magic number: 2:951:848
>[    1.582434] PM: Hibernation image not present or could not be loaded.
>[    1.582462] Warning: unable to open an initial console.
>[    1.597358] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.597533] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.603392] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    1.603396] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    1.604759] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.604935] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.605120] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    1.605124] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    1.605276] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.606034] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D300, max UDMA/100
>[    1.606158] ata2.00: applying bridge limits
>[    1.610017] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    1.610026] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    1.610199] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.610418] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
>[    1.610525] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.610670] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.611359] ata2.00: configured for UDMA/100
>[    1.621467] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    1.621471] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    1.621620] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.621866] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.629177] ata1.00: configured for UDMA/133
>[    1.632068] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
>[    1.634096] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>[    1.634562] sd 0:0:0:0: [sda] Write Protect is off
>[    1.634665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.634750] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.634796] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.636250] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW SH-216AB D300 PQ: 0 ANSI: 5
>[    1.637196]  sda: sda1 sda2
>[    1.639556] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.659756] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.659921] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.661565] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.662154] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.667405] Freeing unused kernel memory: 24964K (ffffffff82100000 - ffffffff83961000)
>[    1.667562] Write protecting the kernel read-only data: 16384k
>[    1.670794] Freeing unused kernel memory: 1800K (ffff88000183e000 - ffff880001a00000)
>[    1.673036] Freeing unused kernel memory: 1376K (ffff880001ea8000 - ffff880002000000)
>[    1.732999] dracut: dracut-018-35.git20120510.fc17
>[    1.771412] udevd[1282]: starting version 182
>[    1.816372] [drm] Initialized drm 1.1.0 20060810
>[    1.818492] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    1.819158] ACPI: Power Button [PWRB]
>[    1.819910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.820388] ACPI: Power Button [PWRF]
>[    1.826678] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.838343] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0152 rev=0x09 flags=need_gfx_hws,is_ivybridge,has_fbc,has_hotplug,has_llc,
>[    1.838395] [drm:intel_detect_pch] Found PantherPoint PCH
>[    1.838841] [drm] Memory usable by graphics device = 2048M
>[    1.838842] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.838843] [drm:i915_gem_gtt_init] GTT stolen size = 64M
>[    1.838844] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.838844] [drm] Replacing VGA console driver
>[    1.843135] Console: switching to colour dummy device 80x25
>[    1.850649] [drm:intel_opregion_setup] graphic opregion physical addr: 0xda3ec018
>[    1.850676] [drm:intel_opregion_setup] SWSCI supported
>[    1.856344] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    1.856567] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[    1.856641] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.856650] [drm] Driver supports precise vblank timestamp query.
>[    1.856660] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.856663] [drm:validate_vbt] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
>[    1.856666] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.856668] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.856670] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.856678] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.856681] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.856683] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.856685] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.856693] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.856695] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.856697] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.856704] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.856787] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.856816] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at dba00000
>[    1.856846] [drm:intel_display_power_get] enabling always-on
>[    1.857248] [drm:intel_print_wm_latency] Primary WM0 latency 6 (0.6 usec)
>[    1.857250] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    1.857252] [drm:intel_print_wm_latency] Primary WM2 latency 16 (8.0 usec)
>[    1.857254] [drm:intel_print_wm_latency] Primary WM3 latency 32 (16.0 usec)
>[    1.857256] [drm:intel_print_wm_latency] Sprite WM0 latency 6 (0.6 usec)
>[    1.857258] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    1.857260] [drm:intel_print_wm_latency] Sprite WM2 latency 16 (8.0 usec)
>[    1.857262] [drm:intel_print_wm_latency] Sprite WM3 latency 32 (16.0 usec)
>[    1.857264] [drm:intel_print_wm_latency] Cursor WM0 latency 6 (0.6 usec)
>[    1.857266] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    1.857268] [drm:intel_print_wm_latency] Cursor WM2 latency 16 (8.0 usec)
>[    1.857270] [drm:intel_print_wm_latency] Cursor WM3 latency 64 (32.0 usec)
>[    1.857273] [drm:intel_modeset_init] 3 display pipes available.
>[    1.857570] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.857905] [drm:intel_lvds_init] LVDS is not present in VBT
>[    1.858494] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
>[    1.858503] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.859958] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    1.859961] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    1.860622] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.861284] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.861803] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.863343] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.863813] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    1.864821] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[    1.864857] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled
>[    1.864868] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[    1.864871] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: disabled
>[    1.864879] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    1.864885] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    1.864899] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: enabled, pipe A
>[    1.864904] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    1.864908] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.864912] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[    1.864916] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A
>[    1.864921] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: enabled
>[    1.864925] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled
>[    1.864929] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled
>[    1.864934] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-2] hw state readout: disabled
>[    1.864938] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-2] hw state readout: disabled
>[    1.864962] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[    1.864964] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.864966] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.864969] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
>[    1.864971] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.864973] [drm:intel_dump_pipe_config] requested mode:
>[    1.864976] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.864978] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.864981] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>[    1.864984] [drm:intel_dump_crtc_timings] crtc timings: 28200 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
>[    1.864986] [drm:intel_dump_pipe_config] port clock: 28200
>[    1.864988] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.864990] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.864992] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
>[    1.864994] [drm:intel_dump_pipe_config] ips: 0
>[    1.864996] [drm:intel_dump_pipe_config] double wide: 0
>[    1.865025] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.865036] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.865043] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.865080] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[    1.865082] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.865084] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.865086] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.865089] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.865091] [drm:intel_dump_pipe_config] requested mode:
>[    1.865093] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.865095] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.865098] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.865101] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.865103] [drm:intel_dump_pipe_config] port clock: 0
>[    1.865105] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.865107] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.865109] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.865111] [drm:intel_dump_pipe_config] ips: 0
>[    1.865113] [drm:intel_dump_pipe_config] double wide: 0
>[    1.865116] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.865118] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.865123] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.865125] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe C
>[    1.865127] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.865129] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.865132] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.865134] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.865136] [drm:intel_dump_pipe_config] requested mode:
>[    1.865139] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.865141] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.865143] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.865146] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.865148] [drm:intel_dump_pipe_config] port clock: 0
>[    1.865150] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.865152] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.865154] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.865156] [drm:intel_dump_pipe_config] ips: 0
>[    1.865158] [drm:intel_dump_pipe_config] double wide: 0
>[    1.865169] [drm:intel_connector_check_state] [CONNECTOR:16:VGA-1]
>[    1.865179] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[    1.865184] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.865188] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.865192] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.865196] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    1.865200] [drm:check_crtc_state] [CRTC:6]
>[    1.865217] [drm:check_crtc_state] [CRTC:10]
>[    1.865220] [drm:check_crtc_state] [CRTC:14]
>[    1.865222] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.865228] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.865245] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
>[    1.865248] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
>[    1.865299] [drm:i915_pages_create_for_stolen] offset=0x0, size=1282048
>[    1.865355] [drm:intel_alloc_plane_obj] plane fb obj ffff8801183e0200
>[    1.865358] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 139000
>[    1.865368] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [139000, 7ffff000]
>[    1.867599] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    1.867603] [drm:i915_gem_context_init] HW context support initialized
>[    1.867660] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[    1.869418] [drm:init_pipe_control] render ring pipe control offset: 0x0015b000
>[    1.869474] [drm:init_status_page] bsd ring hws offset: 0x0015c000
>[    1.869749] [drm:init_status_page] blitter ring hws offset: 0x0017d000
>[    1.870102] [drm] Wrong MCH_SSKPD value: 0x20100406
>[    1.870111] [drm] This can cause pipe underruns and display issues.
>[    1.870119] [drm] Please upgrade your BIOS to fix this.
>[    1.870242] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[    1.870253] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[    1.870272] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
>[    1.879346] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
>[    1.879353] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.879672] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    1.879686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.879689] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.879691] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.880134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.880136] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.880181] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] probed modes :
>[    1.880185] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.880188] [drm:drm_mode_debug_printmodeline] Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.880190] [drm:drm_mode_debug_printmodeline] Modeline 30:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    1.880193] [drm:drm_mode_debug_printmodeline] Modeline 32:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    1.880195] [drm:drm_mode_debug_printmodeline] Modeline 29:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[    1.880198] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[    1.880200] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[    1.880426] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.880430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.880434] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[    1.880436] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1]
>[    1.880439] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.880446] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1] disconnected
>[    1.880448] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.880450] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.880709] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.880713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.880717] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.880719] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-2]
>[    1.880722] [drm:intel_dp_detect] [CONNECTOR:27:DP-2]
>[    1.880728] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-2] disconnected
>[    1.880731] [drm:drm_setup_crtcs] 
>[    1.880753] [drm:drm_enable_connectors] connector 16 enabled? yes
>[    1.880755] [drm:drm_enable_connectors] connector 19 enabled? no
>[    1.880757] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.880758] [drm:drm_enable_connectors] connector 25 enabled? no
>[    1.880760] [drm:drm_enable_connectors] connector 27 enabled? no
>[    1.880768] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
>[    1.880770] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
>[    1.880772] [drm:intel_fb_initial_config] using first mode listed on connector VGA-1
>[    1.880774] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:6]: 1024x768
>[    1.880776] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.880778] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.880780] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.880781] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    1.880785] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 6
>[    1.880797] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.880800] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000
>[    1.880814] [drm:i915_pages_create_for_stolen] offset=0x139000, size=3145728
>[    1.881238] [drm:intelfb_create] allocated 1024x768 fb: 0x0019f000, bo ffff880003573200
>[    1.882207] fbcon: inteldrmfb (fb0) is primary device
>[    1.882883] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[    1.882916] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.882918] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.882920] [drm:drm_mode_debug_printmodeline] Modeline 34:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.882921] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[    1.882923] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.882933] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.882942] [drm:connected_sink_compute_bpp] [CONNECTOR:16:VGA-1] checking for sink bpp constrains
>[    1.882943] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[    1.882945] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.882946] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[    1.882947] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.882948] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.882949] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64
>[    1.882950] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.882951] [drm:intel_dump_pipe_config] requested mode:
>[    1.882953] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.882954] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.882955] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.882957] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[    1.882958] [drm:intel_dump_pipe_config] port clock: 65000
>[    1.882959] [drm:intel_dump_pipe_config] pipe src size: 1024x768
>[    1.882960] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.882961] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.882962] [drm:intel_dump_pipe_config] ips: 0
>[    1.882963] [drm:intel_dump_pipe_config] double wide: 0
>[    1.906360] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 6
>[    1.906365] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    1.906784] [drm:intel_update_fbc] no output, disabling
>[    1.906797] [drm:ivb_modeset_global_resources] disabling fdi C rx
>[    1.906811] [drm:intel_get_shared_dpll] CRTC:6 dropping existing PCH DPLL A
>[    1.906812] [drm:intel_get_shared_dpll] CRTC:6 allocated PCH DPLL A
>[    1.906813] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[    1.906814] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    1.906830] [drm:ironlake_update_primary_plane] Writing base 0019F000 00000000 0 0 4096
>[    1.907601] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x700
>[    1.907613] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x700
>[    1.907616] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0.
>[    1.907624] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600
>[    1.907627] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0.
>[    1.907628] [drm:ivb_manual_fdi_link_train] FDI train done.
>[    1.907632] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0)for crtc 6
>[    1.907632] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    1.909536] [drm:intel_update_fbc] disabled per chip default
>[    1.909550] [drm:intel_connector_check_state] [CONNECTOR:16:VGA-1]
>[    1.909561] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[    1.909564] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.909568] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.909571] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.909574] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    1.909577] [drm:check_crtc_state] [CRTC:6]
>[    1.909594] [drm:check_crtc_state] [CRTC:10]
>[    1.909595] [drm:check_crtc_state] [CRTC:14]
>[    1.909597] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.909601] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.909612] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.909645] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.909646] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.909653] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    1.909683] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    1.909684] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.909709] Console: switching to colour frame buffer device 128x48
>[    1.909738] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[    1.909769] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.909770] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.911836] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.911868] i915 0000:00:02.0: registered panic notifier
>[    1.925754] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
>[    1.925837] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
>[    1.928763] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.932901] acpi device:49: registered as cooling_device4
>[    1.934419] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.935320] [drm] Initialized i915 1.6.0 20140606 for 0000:00:02.0 on minor 0
>[    1.940741] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.940779] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.942275] hub 1-1:1.0: USB hub found
>[    1.942483] hub 1-1:1.0: 6 ports detected
>[    1.954396] dracut: Starting plymouth daemon
>[    1.969254] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[    1.969277] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.969278] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978005] [drm:i915_gem_open] 
>[    1.978248] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[    1.978272] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.978275] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978300] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.978316] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.978318] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978325] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    1.978338] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    1.978340] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978384] [drm:i915_gem_open] 
>[    1.978455] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[    1.978469] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    1.978472] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978478] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    1.978491] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    1.978493] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978500] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    1.978513] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    1.978515] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[    1.978551] [drm:i915_gem_open] 
>[    1.978710] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
>[    1.978736] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
>[    1.978746] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[    1.978751] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[    1.978758] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[    1.978768] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1
>[    1.978770] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.978975] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    1.978983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.978985] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.978987] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    1.979490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    1.979492] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    1.979527] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] probed modes :
>[    1.979530] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.979533] [drm:drm_mode_debug_printmodeline] Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.979536] [drm:drm_mode_debug_printmodeline] Modeline 30:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    1.979539] [drm:drm_mode_debug_printmodeline] Modeline 32:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    1.979541] [drm:drm_mode_debug_printmodeline] Modeline 29:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
>[    1.979552] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[    1.981481] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.981485] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[    1.981489] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[    1.981723] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.981729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.981741] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[    1.981746] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.981749] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[    1.981751] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[    1.981937] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.981942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.981947] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[    1.981962] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.981965] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1]
>[    1.981967] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.981974] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1] disconnected
>[    1.981977] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.981979] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1]
>[    1.981981] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.981987] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1] disconnected
>[    1.981991] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.981993] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.981995] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.982175] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.982179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.982184] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.982191] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.982203] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2]
>[    1.982205] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2]
>[    1.982429] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.982433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.982436] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected
>[    1.982444] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[    1.982447] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-2]
>[    1.982450] [drm:intel_dp_detect] [CONNECTOR:27:DP-2]
>[    1.982456] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-2] disconnected
>[    1.982459] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[    1.982461] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-2]
>[    1.982463] [drm:intel_dp_detect] [CONNECTOR:27:DP-2]
>[    1.982469] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-2] disconnected
>[    2.051340] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    2.126355] tsc: Refined TSC clocksource calibration: 3292.518 MHz
>[    2.141019] kjournald starting.  Commit interval 5 seconds
>[    2.141127] EXT3-fs (sda2): mounted filesystem with ordered data mode
>[    2.166076] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    2.166118] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.171695] hub 2-1:1.0: USB hub found
>[    2.172812] hub 2-1:1.0: 8 ports detected
>[    2.177969] dracut: Checking ext3: /dev/sda2
>[    2.179059] dracut: issuing e2fsck -a  /dev/sda2
>[    2.188166] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
>[    2.190179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.191159] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
>[    2.193138] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.196068] dracut: /dev/sda2: clean, 935837/7200768 files, 18517380/28791808 blocks
>[    2.196747] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
>[    2.196751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.196758] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
>[    2.196760] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.196761] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    2.199230] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
>[    2.199233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.205959] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[    2.209451] dracut: Remounting /dev/sda2 with -o ro
>[    2.216209] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    2.226892] kjournald starting.  Commit interval 5 seconds
>[    2.226968] EXT3-fs (sda2): mounted filesystem with ordered data mode
>[    2.229110] sound hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
>[    2.229796] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>[    2.229797] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    2.229799] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    2.229799] sound hdaudioC0D0:    mono: mono_out=0x0
>[    2.229800] sound hdaudioC0D0:    inputs:
>[    2.229802] sound hdaudioC0D0:      Rear Mic=0x19
>[    2.229803] sound hdaudioC0D0:      Front Mic=0x18
>[    2.243377] dracut: Mounted root filesystem /dev/sda2
>[    2.262001] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    2.271898] device-mapper: uevent: version 1.0.3
>[    2.273925] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.287827] iTCO_vendor_support: vendor-support=0
>[    2.290161] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.291468] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
>[    2.293986] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.327791] dracut: Switching root
>[    2.344366] usb 3-4: new low-speed USB device number 2 using xhci_hcd
>[    2.382825] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.389457] systemd[1]: Failed to insert module 'ipv6'
>[    2.389910] systemd[1]: Set hostname to <x-ivb9>.
>[    2.393111] random: systemd urandom read with 83 bits of entropy available
>[    2.418513] LVM: Logical Volume autoactivation enabled.
>[    2.419688] LVM: Activation generator successfully completed.
>[    2.487731] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    2.489083] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    2.490267] systemd[1]: Starting Syslog Socket.
>[    2.491606] systemd[1]: Listening on Syslog Socket.
>[    2.492999] systemd[1]: Starting Replay Read-Ahead Data...
>[    2.497189] systemd[1]: Starting Collect Read-Ahead Data...
>[    2.500188] systemd[1]: Starting Delayed Shutdown Socket.
>[    2.500362] systemd-readahead[2467]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    2.502021] systemd-readahead[2468]: Failed to create fanotify object: Function not implemented
>[    2.504407] systemd[1]: Listening on Delayed Shutdown Socket.
>[    2.505507] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    2.507437] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    2.507618] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    2.510433] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    2.510530] systemd[1]: Starting Journal Socket.
>[    2.513504] systemd[1]: Listening on Journal Socket.
>[    2.513625] systemd[1]: Mounting Debug File System...
>[    2.518286] systemd[1]: Starting Journal Service...
>[    2.522265] systemd[1]: Started Journal Service.
>[    2.523108] systemd[1]: Starting Create static device nodes in /dev...
>[    2.527262] systemd[1]: Starting udev Kernel Socket.
>[    2.528556] systemd[1]: Listening on udev Kernel Socket.
>[    2.529743] systemd[1]: Starting udev Control Socket.
>[    2.531742] systemd[1]: Listening on udev Control Socket.
>[    2.531893] systemd[1]: Starting udev Coldplug all Devices...
>[    2.532091] systemd-journald[2471]: Vacuuming done, freed 0 bytes
>[    2.536765] systemd[1]: Starting Encrypted Volumes.
>[    2.538358] systemd[1]: Reached target Encrypted Volumes.
>[    2.538479] systemd[1]: Mounting POSIX Message Queue File System...
>[    2.544698] systemd[1]: Mounting Huge Pages File System...
>[    2.547481] systemd[1]: Starting LVM2 metadata daemon socket.
>[    2.548663] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    2.548748] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    2.550807] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    2.550899] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    2.556343] systemd[1]: Expecting device dev-disk-by\x2duuid-a80a5e7e\x2dffe6\x2d4e47\x2db9ee\x2d71d020959c0e.device...
>[    2.557722] systemd[1]: Mounting Temporary Directory...
>[    2.560073] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    2.565116] systemd[1]: Started Replay Read-Ahead Data.
>[    2.566846] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    2.568738] systemd[1]: Started Collect Read-Ahead Data.
>[    2.570940] systemd[1]: Mounted Debug File System.
>[    2.573907] systemd[1]: Started Create static device nodes in /dev.
>[    2.575992] systemd[1]: Mounted POSIX Message Queue File System.
>[    2.577156] usb 3-4: New USB device found, idVendor=046d, idProduct=c31c
>[    2.577158] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.577159] usb 3-4: Product: USB Keyboard
>[    2.577160] usb 3-4: Manufacturer: Logitech
>[    2.577969] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.577999] usb 3-4: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
>[    2.578019] usb 3-4: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
>[    2.584143] systemd[1]: Mounted Huge Pages File System.
>[    2.585842] systemd[1]: Mounted Temporary Directory.
>[    2.586260] systemd[1]: Starting udev Kernel Device Manager...
>[    2.589853] systemd[1]: Starting Load legacy module configuration...
>[    2.593796] systemd-udevd[2607]: starting version 204
>[    2.594518] systemd[1]: Started File System Check on Root Device.
>[    2.594944] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    2.600408] systemd[1]: Started Load Kernel Modules.
>[    2.600513] systemd[1]: Mounting FUSE Control File System...
>[    2.604441] systemd[1]: Mounted Configuration File System.
>[    2.605470] systemd[1]: Starting Setup Virtual Console...
>[    2.608906] systemd[1]: Starting Apply Kernel Variables...
>[    2.611381] EXT3-fs (sda2): using internal journal
>[    2.614722] systemd[1]: Started Set Up Additional Binary Formats.
>[    2.615974] systemd[1]: Started udev Kernel Device Manager.
>[    2.618034] systemd[1]: Mounted FUSE Control File System.
>[    2.624141] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C31C.0001/input/input7
>[    2.636172] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4/input0
>[    2.711790] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C31C.0002/input/input8
>[    2.714626] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4/input1
>[    2.739227] audit: type=1305 audit(1404154105.724:2): audit_pid=3005 old=0 auid=4294967295 ses=4294967295 res=1
>[    2.741236] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C31C.0003/input/input9
>[    2.746579] random: nonblocking pool is initialized
>[    2.747557] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Keyboard] on usb-0000:00:14.0-4/input2
>[    2.924610] systemd-udevd[2711]: renamed network interface em1 to eno1
>[    3.021538] Adding 2047996k swap on /dev/sda1.  Priority:-1 extents:1 across:2047996k SS
>[    3.126557] Switched to clocksource tsc
>[    3.338157] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[    3.439433] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
>[    3.720844] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[    3.725273] [drm:gen6_enable_rps] Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[    6.011459] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    6.012113] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
>[   97.098601] systemd-journald[2471]: Received request to flush runtime journal from PID 1
>[   97.137399] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[   97.137425] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   97.137428] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   97.137437] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[   97.137455] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[   97.137458] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   97.137464] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[   97.137484] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[   97.137486] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[   97.153798] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[   97.153830] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[   97.153831] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055444] [drm:i915_gem_open] 
>[  192.055558] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[  192.055585] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  192.055587] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055595] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  192.055614] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  192.055616] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055623] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  192.055642] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  192.055644] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055678] [drm:i915_gem_open] 
>[  192.055763] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[  192.055784] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  192.055787] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055793] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  192.055812] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  192.055814] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055820] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  192.055839] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  192.055841] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  192.055870] [drm:i915_gem_open] 
>[  192.057083] [drm:i915_gem_open] 
>[  192.057166] [drm:i915_gem_open] 
>[  212.075166] [drm:i915_ring_stop_set] Stopping rings 0x400000ff
>[  218.710980] [drm] stuck on render ring
>[  218.712867] [drm] GPU HANG: ecode 0:0x97f4fffe, in pm_rps [3986], reason: Ring hung, action: reset
>[  218.712976] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  218.713022] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  218.713067] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  218.713114] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  218.713158] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  218.713864] [drm:i915_error_work_func] resetting chip
>[  218.715456] [drm] Simulated gpu hang, resetting stop_rings
>[  218.715499] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[  218.717661] [drm:init_status_page] bsd ring hws offset: 0x0015c000
>[  218.717772] [drm:init_status_page] blitter ring hws offset: 0x0017d000
>[  218.717946] [drm:ironlake_update_primary_plane] Writing base 0019F000 00000000 0 0 4096
>[  218.785112] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[  218.788600] [drm:gen6_enable_rps] Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[  231.889414] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[  231.889440] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  231.889442] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  231.889450] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  231.889469] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  231.889471] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  231.889478] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  231.889496] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  231.889498] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  274.071519] [drm:i915_gem_open] 
>[  274.071612] [drm:i915_gem_open] 
>[  274.072503] [drm:intel_crtc_set_config] [CRTC:6] [FB:35] #connectors=1 (x y) (0 0)
>[  274.072528] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  274.072531] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  274.072539] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  274.072558] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  274.072560] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]
>[  274.072567] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  274.072586] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  274.072589] [drm:intel_modeset_stage_output_state] [CONNECTOR:16:VGA-1] to [CRTC:6]

Actions: View

Attachments on bug 80702: 101996

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.