Attachment 103317 Details for Bug 80081 – dmesg

dmesg

pm_rpm_system-suspend_fixes.dmesg (text/plain), 114.43 KB, created by Guo Jinxian on 2014-07-23 06:18:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-07-23 06:18:01 UTC

Size: 114.43 KB

patch

obsolete

>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
>[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
>[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
>[    0.000000]   node   0: [mem 0x40200000-0xbc855fff]
>[    0.000000]   node   0: [mem 0xbc8aa000-0xbc8b1fff]
>[    0.000000]   node   0: [mem 0xbc9a4000-0xbc9a5fff]
>[    0.000000]   node   0: [mem 0xbcbc5000-0xbcbc5fff]
>[    0.000000]   node   0: [mem 0xbce7c000-0xbcffffff]
>[    0.000000]   node   0: [mem 0x100000000-0x23e5fffff]
>[    0.000000] On node 0 totalpages: 2075518
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 153 pages reserved
>[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11992 pages used for memmap
>[    0.000000]   DMA32 zone: 767461 pages, LIFO batch:31
>[    0.000000]   Normal zone: 20376 pages used for memmap
>[    0.000000]   Normal zone: 1304064 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc856000-0xbc85efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc85f000-0xbc8a9fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc8b2000-0xbc9a3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc9a6000-0xbcbc4fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcbc6000-0xbcbd5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcbd6000-0xbcbf4fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcbf5000-0xbcc18fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcc19000-0xbcc5bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcc5c000-0xbce7bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbd7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xbf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023e200000 s78464 r8192 d23936 u524288
>[    0.000000] pcpu-alloc: s78464 r8192 d23936 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2042933
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_07_23/drm-intel-fixes/a0d036b074b4a5a933e37fcb9bdd6b3cc80a0387/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_07_23/drm-intel-fixes/a0d036b074b4a5a933e37fcb9bdd6b3cc80a0387/modules_x86_64/lib/modules/3.16.0-rc6_drm-intel-fixes_a0d036_20140723+ kexec_jump_back_entry=0x109162f4
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 8067228K/8302072K available (7723K kernel code, 879K rwdata, 3932K rodata, 23240K init, 620K bss, 234844K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:4352 nr_irqs:712 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2494.524 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.04 BogoMIPS (lpj=2494524)
>[    0.000169] pid_max: default: 32768 minimum: 301
>[    0.000254] ACPI: Core revision 20140424
>[    0.004389] ACPI: All ACPI Tables successfully acquired
>[    0.004553] Security Framework initialized
>[    0.005089] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.006819] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.007584] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.007689] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.008044] CPU: Physical Processor ID: 0
>[    0.008125] CPU: Processor Core ID: 0
>[    0.008209] mce: CPU supports 9 MCE banks
>[    0.008299] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.008307] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 6
>[    0.008629] Freeing SMP alternatives memory: 32K (ffffffff832f3000 - ffffffff832fb000)
>[    0.009235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.019308] smpboot: CPU0: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
>[    0.019533] TSC deadline timer enabled
>[    0.019554] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
>[    0.019836] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.019970] ... version:                3
>[    0.020051] ... bit width:              48
>[    0.020132] ... generic registers:      8
>[    0.020212] ... value mask:             0000ffffffffffff
>[    0.020296] ... max period:             0000ffffffffffff
>[    0.020379] ... fixed-purpose events:   3
>[    0.020459] ... event mask:             00000007000000ff
>[    0.020768] x86: Booting SMP configuration:
>[    0.020850] .... node  #0, CPUs:      #1
>[    0.032061] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.034215]  #2
>[    0.045442] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.058717]  #3
>[    0.058717] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.060811] x86: Booted up 1 node, 4 CPUs
>[    0.060971] smpboot: Total of 4 processors activated (19956.19 BogoMIPS)
>[    0.063736] devtmpfs: initialized
>[    0.064122] PM: Registering ACPI NVS region [mem 0xbc85f000-0xbc8a9fff] (307200 bytes)
>[    0.065591] PM: Registering ACPI NVS region [mem 0xbcbd6000-0xbcbf4fff] (126976 bytes)
>[    0.065728] PM: Registering ACPI NVS region [mem 0xbcc19000-0xbcc5bfff] (274432 bytes)
>[    0.066064] xor: automatically using best checksumming function:
>[    0.075578]    avx       : 19032.000 MB/sec
>[    0.075693] RTC time:  5:39:51, date: 07/23/14
>[    0.075829] NET: Registered protocol family 16
>[    0.076111] cpuidle: using governor ladder
>[    0.076193] cpuidle: using governor menu
>[    0.076368] ACPI: bus type PCI registered
>[    0.076513] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.076651] PCI: not using MMCONFIG
>[    0.076731] PCI: Using configuration type 1 for base access
>[    0.096648] raid6: sse2x1    6828 MB/s
>[    0.113644] raid6: sse2x2    8394 MB/s
>[    0.130635] raid6: sse2x4    9617 MB/s
>[    0.130715] raid6: using algorithm sse2x4 (9617 MB/s)
>[    0.130797] raid6: using ssse3x2 recovery algorithm
>[    0.130916] ACPI: Added _OSI(Module Device)
>[    0.130997] ACPI: Added _OSI(Processor Device)
>[    0.131079] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.131161] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.133001] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.135556] ACPI: Dynamic OEM Table Load:
>[    0.135697] ACPI: SSDT 0xFFFF880234131C00 00038C (v01 AMI    IST      00000001 MSFT 03000001)
>[    0.136198] ACPI: Dynamic OEM Table Load:
>[    0.136335] ACPI: SSDT 0xFFFF880234015D80 000084 (v01 AMI    CST      00000001 MSFT 03000001)
>[    0.137186] ACPI: Interpreter enabled
>[    0.137270] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.137463] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.137664] ACPI: (supports S0 S3 S4 S5)
>[    0.137745] ACPI: Using IOAPIC for interrupt routing
>[    0.137843] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.138032] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
>[    0.138226] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.138580] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.143449] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.143538] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.143850] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.144165] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.144330] PCI host bridge to bus 0000:00
>[    0.144413] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.144496] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
>[    0.144581] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
>[    0.144665] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
>[    0.144752] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.144837] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.144923] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.145009] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
>[    0.145100] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>[    0.145185] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    0.145216] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.145250] pci 0000:00:01.0: System wakeup disabled by ACPI
>[    0.145381] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
>[    0.145392] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
>[    0.145397] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.145402] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.145522] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.145555] pci 0000:00:16.0: reg 0x10: [mem 0xfe62a000-0xfe62a00f 64bit]
>[    0.145670] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.145754] pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
>[    0.145779] pci 0000:00:16.2: reg 0x10: [io  0xf130-0xf137]
>[    0.145792] pci 0000:00:16.2: reg 0x14: [io  0xf120-0xf123]
>[    0.145804] pci 0000:00:16.2: reg 0x18: [io  0xf110-0xf117]
>[    0.145817] pci 0000:00:16.2: reg 0x1c: [io  0xf100-0xf103]
>[    0.145829] pci 0000:00:16.2: reg 0x20: [io  0xf0f0-0xf0ff]
>[    0.145980] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
>[    0.146007] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
>[    0.146021] pci 0000:00:16.3: reg 0x14: [mem 0xfe629000-0xfe629fff]
>[    0.146219] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.146250] pci 0000:00:19.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
>[    0.146264] pci 0000:00:19.0: reg 0x14: [mem 0xfe628000-0xfe628fff]
>[    0.146277] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
>[    0.146389] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.146434] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.146567] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.146598] pci 0000:00:1a.0: reg 0x10: [mem 0xfe627000-0xfe6273ff]
>[    0.146736] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.146783] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.146917] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.146945] pci 0000:00:1b.0: reg 0x10: [mem 0xfe620000-0xfe623fff 64bit]
>[    0.147076] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.147162] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.147301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.147350] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.147487] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
>[    0.147620] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>[    0.147668] pci 0000:00:1c.6: System wakeup disabled by ACPI
>[    0.147805] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.147836] pci 0000:00:1d.0: reg 0x10: [mem 0xfe626000-0xfe6263ff]
>[    0.147974] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.148018] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.148145] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.148266] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.148394] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
>[    0.148617] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>[    0.148651] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
>[    0.148664] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
>[    0.148678] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
>[    0.148691] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
>[    0.148705] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.148718] pci 0000:00:1f.2: reg 0x24: [mem 0xfe625000-0xfe6257ff]
>[    0.148806] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.148891] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    0.148916] pci 0000:00:1f.3: reg 0x10: [mem 0xfe624000-0xfe6240ff 64bit]
>[    0.148953] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.149079] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.149243] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.149449] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
>[    0.149487] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
>[    0.149673] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.151903] pci 0000:00:1c.6: PCI bridge to [bus 03]
>[    0.151993] pci 0000:00:1c.6:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    0.152064] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
>[    0.152088] pci 0000:04:03.0: reg 0x10: [mem 0xfe400000-0xfe400fff]
>[    0.152199] pci 0000:04:03.0: supports D1 D2
>[    0.152201] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.152292] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
>[    0.152385] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
>[    0.152393] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
>[    0.152395] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
>[    0.152399] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
>[    0.152401] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.152403] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.152405] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.152407] pci 0000:00:1e.0:   bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
>[    0.152984] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>[    0.153524] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
>[    0.154063] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.154572] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.155083] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled.
>[    0.155618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.156184] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15), disabled.
>[    0.156721] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>[    0.157278] ACPI: Enabled 3 GPEs in block 00 to 3F
>[    0.157485] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.157620] vgaarb: loaded
>[    0.157697] vgaarb: bridge control possible 0000:00:02.0
>[    0.157856] SCSI subsystem initialized
>[    0.157985] libata version 3.00 loaded.
>[    0.158036] ACPI: bus type USB registered
>[    0.158141] usbcore: registered new interface driver usbfs
>[    0.158235] usbcore: registered new interface driver hub
>[    0.158334] usbcore: registered new device driver usb
>[    0.158444] pps_core: LinuxPPS API ver. 1 registered
>[    0.158526] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.158806] PTP clock support registered
>[    0.158946] PCI: Using ACPI for IRQ routing
>[    0.162202] PCI: pci_cache_line_size set to 64 bytes
>[    0.162267] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
>[    0.162269] e820: reserve RAM buffer [mem 0xbc856000-0xbfffffff]
>[    0.162271] e820: reserve RAM buffer [mem 0xbc8b2000-0xbfffffff]
>[    0.162274] e820: reserve RAM buffer [mem 0xbc9a6000-0xbfffffff]
>[    0.162276] e820: reserve RAM buffer [mem 0xbcbc6000-0xbfffffff]
>[    0.162278] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
>[    0.162279] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
>[    0.162408] NetLabel: Initializing
>[    0.162488] NetLabel:  domain hash size = 128
>[    0.162572] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.162664] NetLabel:  unlabeled traffic allowed by default
>[    0.162852] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.163192] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.165296] Switched to clocksource hpet
>[    0.168401] pnp: PnP ACPI init
>[    0.168499] ACPI: bus type PNP registered
>[    0.168685] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
>[    0.168773] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
>[    0.168860] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.168946] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.169032] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
>[    0.169119] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.169241] system 00:01: [io  0x0290-0x029f] has been reserved
>[    0.169352] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.169547] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.169602] system 00:03: [io  0x04d0-0x04d1] has been reserved
>[    0.169689] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.169831] pnp 00:04: [dma 0 disabled]
>[    0.169888] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.169982] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
>[    0.170136] system 00:06: [io  0x0400-0x0453] could not be reserved
>[    0.170224] system 00:06: [io  0x0458-0x047f] has been reserved
>[    0.170334] system 00:06: [io  0x1180-0x119f] has been reserved
>[    0.170419] system 00:06: [io  0x0500-0x057f] has been reserved
>[    0.170505] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.170590] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
>[    0.170677] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
>[    0.170763] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
>[    0.170849] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.170904] system 00:07: [io  0x0454-0x0457] has been reserved
>[    0.170991] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.171167] pnp: PnP ACPI: found 8 devices
>[    0.171248] ACPI: bus type PNP unregistered
>[    0.177771] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.177858] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.177956] pci 0000:00:1c.6: PCI bridge to [bus 03]
>[    0.178044] pci 0000:00:1c.6:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    0.178139] pci 0000:00:1e.0: PCI bridge to [bus 04]
>[    0.178227] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
>[    0.178346] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
>[    0.178348] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
>[    0.178349] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
>[    0.178351] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
>[    0.178353] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.178355] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
>[    0.178357] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
>[    0.178359] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
>[    0.178361] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
>[    0.178363] pci_bus 0000:04: resource 4 [io  0x0000-0x03af]
>[    0.178364] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7]
>[    0.178366] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df]
>[    0.178368] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff]
>[    0.178369] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.178371] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
>[    0.178373] pci_bus 0000:04: resource 10 [mem 0xbfa00000-0xffffffff]
>[    0.178397] NET: Registered protocol family 2
>[    0.178644] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.178905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.179103] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.179203] TCP: reno registered
>[    0.179307] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.179418] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.179554] NET: Registered protocol family 1
>[    0.179699] RPC: Registered named UNIX socket transport module.
>[    0.179784] RPC: Registered udp transport module.
>[    0.179865] RPC: Registered tcp transport module.
>[    0.179947] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.180066] pci 0000:00:02.0: Boot video device
>[    0.180443] PCI: CLS 64 bytes, default 64
>[    0.571453] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.571543] software IO TLB [mem 0xb8856000-0xbc856000] (64MB) mapped at [ffff8800b8856000-ffff8800bc855fff]
>[    0.572012] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>[    0.572637] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.572759] audit: initializing netlink subsys (disabled)
>[    0.572870] audit: type=2000 audit(1406093990.566:1): initialized
>[    0.573282] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.575144] VFS: Disk quotas dquot_6.5.2
>[    0.575264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.576039] NFS: Registering the id_resolver key type
>[    0.576128] Key type id_resolver registered
>[    0.576209] Key type id_legacy registered
>[    0.576293] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.576519] fuse init (API version 7.23)
>[    0.576687] msgmni has been set to 15756
>[    0.577018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.577158] io scheduler noop registered
>[    0.577240] io scheduler deadline registered
>[    0.577351] io scheduler cfq registered (default)
>[    0.577579] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.577719] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>[    0.577846] pcieport 0000:00:1c.6: irq 42 for MSI/MSI-X
>[    0.577963] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>[    0.578051] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>[    0.578076] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    0.578166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    0.578188] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
>[    0.578273] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
>[    0.578362] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
>[    0.578371] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.578745] Monitor-Mwait will be used to enter C-2 state
>[    0.578749] Monitor-Mwait will be used to enter C-3 state
>[    0.578768] ACPI: acpi_idle registered with cpuidle
>[    0.579649] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.600528] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.621840] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A
>[    0.623573] Non-volatile memory driver v1.3
>[    0.623677] Linux agpgart interface v0.103
>[    0.625158] brd: module loaded
>[    0.625366] Loading iSCSI transport class v2.0-870.
>[    0.625635] iscsi: registered transport (tcp)
>[    0.625888] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.626032] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.626230] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.626431] iscsi: registered transport (qla4xxx)
>[    0.626542] QLogic iSCSI HBA Driver
>[    0.626663] DC390: clustering now enabled by default. If you get problems load
>[    0.626839]        with "disable_clustering=1" and report to maintainers
>[    0.626948] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.627096] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.627222] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.627357] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.627468] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.627676] SCSI Media Changer driver v0.25 
>[    0.627850] ahci 0000:00:1f.2: version 3.0
>[    0.627948] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>[    0.638750] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
>[    0.638887] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
>[    0.645331] scsi0 : ahci
>[    0.645534] scsi1 : ahci
>[    0.645803] scsi2 : ahci
>[    0.646009] scsi3 : ahci
>[    0.646184] scsi4 : ahci
>[    0.646370] scsi5 : ahci
>[    0.646495] ata1: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625100 irq 43
>[    0.646628] ata2: DUMMY
>[    0.646738] ata3: DUMMY
>[    0.646818] ata4: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625280 irq 43
>[    0.646950] ata5: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625300 irq 43
>[    0.647082] ata6: SATA max UDMA/133 abar m2048@0xfe625000 port 0xfe625380 irq 43
>[    0.648509] scsi6 : ata_generic
>[    0.648746] scsi7 : ata_generic
>[    0.648871] ata7: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 18
>[    0.648983] ata8: PATA max UDMA/100 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 18
>[    0.649132] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.649327] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.649581] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.649690] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.649797] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.649901] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.649999] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.650102] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.650316] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.650471] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    0.851435] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    0.851545] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:6a:49:40
>[    0.851695] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.851812] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>[    0.851915] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.852013] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.852122] usbcore: registered new interface driver catc
>[    0.852231] usbcore: registered new interface driver kaweth
>[    0.852324] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.852494] usbcore: registered new interface driver pegasus
>[    0.852598] usbcore: registered new interface driver rtl8150
>[    0.852715] usbcore: registered new interface driver asix
>[    0.852817] usbcore: registered new interface driver ax88179_178a
>[    0.852923] usbcore: registered new interface driver cdc_ether
>[    0.853025] usbcore: registered new interface driver dm9601
>[    0.853129] usbcore: registered new interface driver gl620a
>[    0.853235] usbcore: registered new interface driver net1080
>[    0.853335] usbcore: registered new interface driver plusb
>[    0.853469] usbcore: registered new interface driver rndis_host
>[    0.853583] usbcore: registered new interface driver cdc_subset
>[    0.853694] usbcore: registered new interface driver zaurus
>[    0.853800] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.853961] usbcore: registered new interface driver cdc_ncm
>[    0.854138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.854232] ehci-pci: EHCI PCI platform driver
>[    0.854397] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.854595] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.854759] ehci-pci 0000:00:1a.0: debug port 2
>[    0.858727] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.858741] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe627000
>[    0.864454] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.864578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.864672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.864804] usb usb1: Product: EHCI Host Controller
>[    0.864886] usb usb1: Manufacturer: Linux 3.16.0-rc6_drm-intel-fixes_a0d036_20140723+ ehci_hcd
>[    0.865019] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.865281] hub 1-0:1.0: USB hub found
>[    0.865383] hub 1-0:1.0: 3 ports detected
>[    0.865661] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.865847] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.866019] ehci-pci 0000:00:1d.0: debug port 2
>[    0.870004] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.870018] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe626000
>[    0.875439] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.875559] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.875654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.875786] usb usb2: Product: EHCI Host Controller
>[    0.875868] usb usb2: Manufacturer: Linux 3.16.0-rc6_drm-intel-fixes_a0d036_20140723+ ehci_hcd
>[    0.876003] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.876274] hub 2-0:1.0: USB hub found
>[    0.876387] hub 2-0:1.0: 3 ports detected
>[    0.876587] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.876688] ohci-pci: OHCI PCI platform driver
>[    0.876801] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.876970] xhci_hcd 0000:03:00.0: xHCI Host Controller
>[    0.877148] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
>[    0.877489] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
>[    0.877492] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
>[    0.877495] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
>[    0.877498] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
>[    0.877501] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
>[    0.877623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.877709] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.877840] usb usb3: Product: xHCI Host Controller
>[    0.877922] usb usb3: Manufacturer: Linux 3.16.0-rc6_drm-intel-fixes_a0d036_20140723+ xhci_hcd
>[    0.878056] usb usb3: SerialNumber: 0000:03:00.0
>[    0.878292] hub 3-0:1.0: USB hub found
>[    0.878429] hub 3-0:1.0: 2 ports detected
>[    0.878588] xhci_hcd 0000:03:00.0: xHCI Host Controller
>[    0.878760] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
>[    0.880891] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.880982] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.881114] usb usb4: Product: xHCI Host Controller
>[    0.881197] usb usb4: Manufacturer: Linux 3.16.0-rc6_drm-intel-fixes_a0d036_20140723+ xhci_hcd
>[    0.881330] usb usb4: SerialNumber: 0000:03:00.0
>[    0.881540] hub 4-0:1.0: USB hub found
>[    0.881647] hub 4-0:1.0: 2 ports detected
>[    0.881854] usbcore: registered new interface driver usb-storage
>[    0.882001] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.885350] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.885484] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.885706] mousedev: PS/2 mouse device common for all mice
>[    0.885936] rtc_cmos 00:02: RTC can wake from S4
>[    0.886254] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.886393] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.886540] i2c /dev entries driver
>[    0.886659] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.886982] usbcore: registered new interface driver usbhid
>[    0.887122] usbhid: USB HID core driver
>[    0.887319] TCP: cubic registered
>[    0.887427] Initializing XFRM netlink socket
>[    0.887512] NET: Registered protocol family 17
>[    0.887614] Key type dns_resolver registered
>[    0.888109] registered taskstats version 1
>[    0.888644] Btrfs loaded
>[    0.889139]   Magic number: 6:395:669
>[    0.889330] PM: Hibernation image not present or could not be loaded.
>[    0.889343] Warning: unable to open an initial console.
>[    0.951343] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.951463] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.951567] ata5: SATA link down (SStatus 0 SControl 300)
>[    0.951674] ata6: SATA link down (SStatus 0 SControl 300)
>[    0.954115] ata4.00: ATAPI: ATAPI   iHAS124   B, AL0S, max UDMA/100
>[    0.955016] ata4.00: configured for UDMA/100
>[    0.962717] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133
>[    0.962814] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.972633] ata1.00: configured for UDMA/133
>[    0.972908] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5
>[    0.973356] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    0.973359] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    0.973470] sd 0:0:0:0: [sda] Write Protect is off
>[    0.973472] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.973514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.974042]  sda: sda1 sda2
>[    0.974544] sd 0:0:0:0: [sda] Attached SCSI disk
>[    0.979271] scsi 3:0:0:0: CD-ROM            ATAPI    iHAS124   B      AL0S PQ: 0 ANSI: 5
>[    1.004949] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.005089] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.005300] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[    1.005365] sr 3:0:0:0: Attached scsi generic sg1 type 5
>[    1.167071] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.171162] Freeing unused kernel memory: 23240K (ffffffff81c41000 - ffffffff832f3000)
>[    1.202341] dracut: dracut-018-35.git20120510.fc17
>[    1.227619] udevd[1255]: starting version 182
>[    1.240149] [drm] Initialized drm 1.1.0 20060810
>[    1.240799] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    1.241007] ACPI: Power Button [PWRB]
>[    1.241144] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.241316] ACPI: Power Button [PWRF]
>[    1.243608] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc,
>[    1.243623] [drm:intel_detect_pch] Found CougarPoint PCH
>[    1.243651] [drm] Memory usable by graphics device = 2048M
>[    1.243750] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.243752] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.243753] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.243754] [drm] Replacing VGA console driver
>[    1.245005] Console: switching to colour dummy device 80x25
>[    1.245709] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcbd6018
>[    1.245717] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.245718] [drm:intel_opregion_setup] SWSCI supported
>[    1.250928] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000041)
>[    1.250933] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    1.250935] [drm:intel_opregion_setup] ASLE supported
>[    1.251016] i915 0000:00:02.0: irq 50 for MSI/MSI-X
>[    1.251022] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.251026] [drm] Driver supports precise vblank timestamp query.
>[    1.251029] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.251031] [drm:validate_vbt] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
>[    1.251034] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.251035] [drm:parse_general_definitions] crt_ddc_bus_pin: 5
>[    1.251037] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.251040] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.251043] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.251044] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.251047] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.251049] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.251051] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.251053] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.251055] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.251062] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.251068] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bda00000
>[    1.251070] [drm:intel_display_power_get] enabling always-on
>[    1.251109] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    1.251110] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.251112] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.251113] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.251115] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    1.251116] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.251118] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.251119] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.251121] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    1.251122] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.251124] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.251125] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.251127] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
>[    1.251128] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    1.251130] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.251131] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.251132] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.251134] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    1.251135] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.251137] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.251138] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.251140] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    1.251141] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.251143] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.251144] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.251146] [drm:intel_modeset_init] 2 display pipes available.
>[    1.251159] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.251467] [drm:intel_lvds_init] LVDS is not present in VBT
>[    1.251508] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
>[    1.251512] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.252066] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    1.252068] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    1.252147] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.252191] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.252217] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.252380] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.252408] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    1.252469] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    1.252495] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-3
>[    1.252558] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[    1.252580] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.252582] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.252589] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    1.252595] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    1.252601] [drm:intel_modeset_readout_hw_state] [ENCODER:11:DAC-11] hw state readout: enabled, pipe A
>[    1.252604] [drm:intel_modeset_readout_hw_state] [ENCODER:12:TMDS-12] hw state readout: disabled, pipe A
>[    1.252607] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A
>[    1.252610] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    1.252613] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A
>[    1.252616] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.252620] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[    1.252623] [drm:intel_modeset_readout_hw_state] [CONNECTOR:10:VGA-1] hw state readout: enabled
>[    1.252626] [drm:intel_modeset_readout_hw_state] [CONNECTOR:13:HDMI-A-1] hw state readout: disabled
>[    1.252630] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:DP-1] hw state readout: disabled
>[    1.252633] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-2] hw state readout: disabled
>[    1.252636] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-3] hw state readout: disabled
>[    1.252638] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled
>[    1.252640] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:DP-3] hw state readout: disabled
>[    1.252644] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.252646] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.252647] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.252649] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 659903, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
>[    1.252651] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.252653] [drm:intel_dump_pipe_config] requested mode:
>[    1.252655] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.252656] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.252658] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>[    1.252661] [drm:intel_dump_crtc_timings] crtc timings: 28200 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
>[    1.252662] [drm:intel_dump_pipe_config] port clock: 28200
>[    1.252663] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.252665] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.252667] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
>[    1.252668] [drm:intel_dump_pipe_config] ips: 0
>[    1.252669] [drm:intel_dump_pipe_config] double wide: 0
>[    1.252672] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.252673] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.252676] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.252678] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.252679] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.252680] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.252682] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.252684] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.252685] [drm:intel_dump_pipe_config] requested mode:
>[    1.252687] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.252688] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.252690] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.252693] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.252694] [drm:intel_dump_pipe_config] port clock: 0
>[    1.252695] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.252697] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.252698] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.252699] [drm:intel_dump_pipe_config] ips: 0
>[    1.252700] [drm:intel_dump_pipe_config] double wide: 0
>[    1.252705] [drm:intel_connector_check_state] [CONNECTOR:10:VGA-1]
>[    1.252714] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[    1.252717] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[    1.252720] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.252722] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.252725] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    1.252728] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.252730] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.252733] [drm:check_crtc_state] [CRTC:5]
>[    1.252746] [drm:check_crtc_state] [CRTC:8]
>[    1.252747] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.252752] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.252760] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
>[    1.252762] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
>[    1.252766] [drm:i915_pages_create_for_stolen] offset=0x0, size=1282048
>[    1.252770] [drm:intel_alloc_plane_obj] plane fb obj ffff88022fa72000
>[    1.252772] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 139000
>[    1.252774] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [139000, 7ffff000]
>[    1.255132] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    1.255135] [drm:i915_gem_context_init] HW context support initialized
>[    1.255145] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[    1.255252] [drm:init_pipe_control] render ring pipe control offset: 0x00162000
>[    1.255257] [drm:init_status_page] bsd ring hws offset: 0x00163000
>[    1.255300] [drm:init_status_page] blitter ring hws offset: 0x00184000
>[    1.255373] [drm] Wrong MCH_SSKPD value: 0x16040307
>[    1.255377] [drm] This can cause pipe underruns and display issues.
>[    1.255379] [drm] Please upgrade your BIOS to fix this.
>[    1.255400] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[    1.255402] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.255405] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x80f40010
>[    1.264941] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x80f40010, result 0
>[    1.264943] [drm:intel_crt_detect] CRT not detected via hotplug
>[    1.265168] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.265179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.265181] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.265183] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.265587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.265588] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.265590] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.265592] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] disconnected
>[    1.265594] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[    1.265596] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.265797] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.265800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.265803] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.265806] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[    1.265816] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.265819] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[    1.265820] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[    1.265822] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.266017] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.266028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.266030] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.266032] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[    1.266034] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.266258] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.266269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.266272] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[    1.266274] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[    1.266276] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.266279] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[    1.266280] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[    1.266282] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.266284] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[    1.266287] i915 0000:00:02.0: No connectors reported connected with modes
>[    1.266290] [drm:drm_setup_crtcs] 
>[    1.266292] [drm:drm_enable_connectors] connector 10 enabled? no
>[    1.266294] [drm:drm_enable_connectors] connector 13 enabled? no
>[    1.266295] [drm:drm_enable_connectors] connector 17 enabled? no
>[    1.266296] [drm:drm_enable_connectors] connector 19 enabled? no
>[    1.266297] [drm:drm_enable_connectors] connector 21 enabled? no
>[    1.266299] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.266300] [drm:drm_enable_connectors] connector 25 enabled? no
>[    1.266302] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    1.266303] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.266304] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.266306] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.266307] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping
>[    1.266308] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    1.266309] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
>[    1.266311] [drm:intel_fb_initial_config] Not using firmware configuration
>[    1.266313] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    1.266314] [drm] Cannot find any crtc or sizes - going 1024x768
>[    1.266317] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.266318] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000
>[    1.266321] [drm:i915_pages_create_for_stolen] offset=0x139000, size=3145728
>[    1.266735] [drm:intelfb_create] allocated 1024x768 fb: 0x001a6000, bo ffff88022fa73180
>[    1.266859] fbcon: inteldrmfb (fb0) is primary device
>[    1.266903] [drm:intel_crtc_cursor_set] cursor off
>[    1.266907] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    1.266909] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[    1.266910] [drm:intel_modeset_stage_output_state] [CONNECTOR:10:VGA-1] to [NOCRTC]
>[    1.266911] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[    1.266912] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[    1.266913] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[    1.266914] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[    1.281675] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.281677] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.281982] hub 1-1:1.0: USB hub found
>[    1.282092] hub 1-1:1.0: 6 ports detected
>[    1.292897] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 5
>[    1.292909] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    1.293321] [drm:intel_update_fbc] no output, disabling
>[    1.293325] [drm:intel_display_power_put] disabling always-on
>[    1.293336] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[    1.293338] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[    1.293340] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.293342] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.293344] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    1.293346] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.293348] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    1.293350] [drm:check_crtc_state] [CRTC:5]
>[    1.293351] [drm:check_crtc_state] [CRTC:8]
>[    1.293352] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.293356] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.293361] [drm:intel_crtc_cursor_set] cursor off
>[    1.293362] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.293364] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.293368] Console: switching to colour frame buffer device 128x48
>[    1.296218] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.296253] i915 0000:00:02.0: registered panic notifier
>[    1.296298] i915: No ACPI video bus found
>[    1.296348] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    1.301076] dracut: Starting plymouth daemon
>[    1.312859] [drm:i915_gem_open] 
>[    1.312881] [drm:intel_crtc_cursor_set] cursor off
>[    1.312883] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    1.312886] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.312889] [drm:intel_crtc_cursor_set] cursor off
>[    1.312890] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.312892] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.312901] [drm:i915_gem_open] 
>[    1.312910] [drm:intel_crtc_cursor_set] cursor off
>[    1.312911] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    1.312913] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.312914] [drm:intel_crtc_cursor_set] cursor off
>[    1.312916] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.312917] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.312924] [drm:i915_gem_open] 
>[    1.312965] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[    1.312968] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[    1.312974] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[    1.312976] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[    1.312978] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.312980] [drm:intel_display_power_get] enabling always-on
>[    1.312984] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40010, result 0
>[    1.312985] [drm:intel_crt_detect] CRT not detected via hotplug
>[    1.313185] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.313197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.313199] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.313201] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.313606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.313608] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.313609] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.313611] [drm:intel_display_power_put] disabling always-on
>[    1.313613] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] disconnected
>[    1.313618] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[    1.313620] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[    1.313621] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[    1.313623] [drm:intel_display_power_get] enabling always-on
>[    1.313626] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40010, result 0
>[    1.313627] [drm:intel_crt_detect] CRT not detected via hotplug
>[    1.313794] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.313796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.313799] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.313801] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.314225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.314226] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.314228] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    1.314229] [drm:intel_display_power_put] disabling always-on
>[    1.314230] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] disconnected
>[    1.314235] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[    1.314236] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[    1.314238] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.314239] [drm:intel_display_power_get] enabling always-on
>[    1.314398] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.314401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.314403] [drm:intel_display_power_put] disabling always-on
>[    1.314405] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.314409] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[    1.314411] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[    1.314420] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[    1.314421] [drm:intel_display_power_get] enabling always-on
>[    1.314580] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.314582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.314584] [drm:intel_display_power_put] disabling always-on
>[    1.314587] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[    1.314591] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.314593] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[    1.314603] [drm:intel_display_power_get] enabling always-on
>[    1.314604] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.314607] [drm:intel_display_power_put] disabling always-on
>[    1.314608] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[    1.314610] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.314611] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[    1.314613] [drm:intel_display_power_get] enabling always-on
>[    1.314614] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[    1.314616] [drm:intel_display_power_put] disabling always-on
>[    1.314618] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[    1.314620] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.314621] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[    1.314623] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.314624] [drm:intel_display_power_get] enabling always-on
>[    1.314783] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.314785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.314787] [drm:intel_display_power_put] disabling always-on
>[    1.314789] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.314793] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    1.314795] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[    1.314797] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[    1.314799] [drm:intel_display_power_get] enabling always-on
>[    1.315027] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.315038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.315040] [drm:intel_display_power_put] disabling always-on
>[    1.315041] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[    1.315047] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[    1.315049] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[    1.315051] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.315052] [drm:intel_display_power_get] enabling always-on
>[    1.315283] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.315294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.315296] [drm:intel_display_power_put] disabling always-on
>[    1.315298] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[    1.315302] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[    1.315304] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[    1.315305] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[    1.315307] [drm:intel_display_power_get] enabling always-on
>[    1.315530] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    1.315542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    1.315544] [drm:intel_display_power_put] disabling always-on
>[    1.315546] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[    1.315551] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.315553] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[    1.315555] [drm:intel_display_power_get] enabling always-on
>[    1.315557] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.315559] [drm:intel_display_power_put] disabling always-on
>[    1.315561] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[    1.315563] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[    1.315564] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[    1.315565] [drm:intel_display_power_get] enabling always-on
>[    1.315567] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[    1.315569] [drm:intel_display_power_put] disabling always-on
>[    1.315571] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[    1.315573] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.315574] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[    1.315576] [drm:intel_display_power_get] enabling always-on
>[    1.315577] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.315579] [drm:intel_display_power_put] disabling always-on
>[    1.315581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[    1.315582] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[    1.315584] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[    1.315585] [drm:intel_display_power_get] enabling always-on
>[    1.315586] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[    1.315589] [drm:intel_display_power_put] disabling always-on
>[    1.315590] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[    1.315619] [drm:intel_crtc_cursor_set] cursor off
>[    1.315620] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    1.315623] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    1.315625] [drm:intel_crtc_cursor_set] cursor off
>[    1.315626] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    1.315628] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    1.363770] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
>[    1.373955] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[    1.375076] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    1.375455] input: PC Speaker as /devices/platform/pcspkr/input/input5
>[    1.384810] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.387394] iTCO_vendor_support: vendor-support=0
>[    1.387542] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.387608] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[    1.387803] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.395463] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    1.395506] EXT4-fs (sda2): write access will be enabled during recovery
>[    1.403451] ppdev: user-space parallel port driver
>[    1.404584] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    1.404633] sound hdaudioC0D2:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
>[    1.405268] EXT4-fs (sda2): recovery complete
>[    1.407147] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    1.408405] sound hdaudioC0D2:    mono: mono_out=0x0
>[    1.409654] sound hdaudioC0D2:    dig-out=0x1e/0x0
>[    1.410889] sound hdaudioC0D2:    inputs:
>[    1.412112] sound hdaudioC0D2:      Front Mic=0x19
>[    1.412133] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.412723] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
>[    1.415730] sound hdaudioC0D2:      Rear Mic=0x18
>[    1.416944] sound hdaudioC0D2:      Line=0x1a
>[    1.426744] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
>[    1.439223] dracut: Checking ext4: /dev/sda2
>[    1.440586] dracut: issuing e2fsck -a  /dev/sda2
>[    1.447587] dracut: /dev/sda2: clean, 940958/14524416 files, 18906702/58095360 blocks
>[    1.449200] dracut: Remounting /dev/sda2 with -o ro
>[    1.454746] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.459126] dracut: Mounted root filesystem /dev/sda2
>[    1.471793] device-mapper: uevent: version 1.0.3
>[    1.473136] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    1.499398] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.500667] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.502239] hub 2-1:1.0: USB hub found
>[    1.503609] hub 2-1:1.0: 8 ports detected
>[    1.572536] tsc: Refined TSC clocksource calibration: 2494.333 MHz
>[    1.781513] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
>[    1.873140] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[    1.874387] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.875623] usb 2-1.1: Product: USB Optical Mouse
>[    1.876864] usb 2-1.1: Manufacturer: Logitech
>[    1.880949] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0001/input/input6
>[    1.883851] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[    1.931201] firewire_core 0000:04:03.0: created device fw0: GUID 00224dffff6cd2aa, S400
>[    1.959299] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
>[    2.053161] usb 2-1.2: New USB device found, idVendor=413c, idProduct=2107
>[    2.054550] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.055931] usb 2-1.2: Product: Dell USB Entry Keyboard
>[    2.057298] usb 2-1.2: Manufacturer: DELL
>[    2.062227] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:413C:2107.0002/input/input7
>[    2.065291] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.2/input0
>[    2.572481] Switched to clocksource tsc
>[    2.711373] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.716018] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[    4.377001] floppy0: no floppy controllers found
>[    4.390933] dracut: Switching root
>[    4.428332] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    4.434463] systemd[1]: Failed to insert module 'ipv6'
>[    4.434678] systemd[1]: Set hostname to <x-sgb3>.
>[    4.435504] random: systemd urandom read with 85 bits of entropy available
>[    4.446066] LVM: Logical Volume autoactivation enabled.
>[    4.447587] LVM: Activation generator successfully completed.
>[    4.484041] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    4.485610] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    4.487125] systemd[1]: Starting Syslog Socket.
>[    4.488679] systemd[1]: Listening on Syslog Socket.
>[    4.490181] systemd[1]: Starting Replay Read-Ahead Data...
>[    4.492070] systemd[1]: Starting Collect Read-Ahead Data...
>[    4.493350] systemd-readahead[2410]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    4.497937] systemd[1]: Starting Delayed Shutdown Socket.
>[    4.498724] systemd-readahead[2411]: Failed to create fanotify object: Function not implemented
>[    4.502187] systemd[1]: Listening on Delayed Shutdown Socket.
>[    4.502199] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    4.505286] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    4.505313] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    4.508402] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    4.508417] systemd[1]: Starting Journal Socket.
>[    4.513110] systemd[1]: Listening on Journal Socket.
>[    4.513135] systemd[1]: Mounting Huge Pages File System...
>[    4.517958] systemd[1]: Starting Journal Service...
>[    4.522143] systemd[1]: Started Journal Service.
>[    4.522468] systemd[1]: Starting udev Kernel Socket.
>[    4.526571] systemd[1]: Listening on udev Kernel Socket.
>[    4.526630] systemd[1]: Starting udev Control Socket.
>[    4.530840] systemd[1]: Listening on udev Control Socket.
>[    4.530908] systemd[1]: Starting udev Coldplug all Devices...
>[    4.534075] systemd[1]: Mounting Debug File System...
>[    4.536460] systemd[1]: Starting Encrypted Volumes.
>[    4.538997] systemd[1]: Reached target Encrypted Volumes.
>[    4.539072] systemd[1]: Starting Create static device nodes in /dev...
>[    4.541905] systemd[1]: Mounting POSIX Message Queue File System...
>[    4.544425] systemd[1]: Starting LVM2 metadata daemon socket.
>[    4.546910] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    4.546926] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    4.549584] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    4.549595] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    4.553965] systemd[1]: Expecting device dev-disk-by\x2duuid-f3a1cbf6\x2d2bc7\x2d4b66\x2d9fba\x2dd14f1be17919.device...
>[    4.556427] systemd[1]: Mounting Temporary Directory...
>[    4.560281] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    4.562117] systemd[1]: Started Replay Read-Ahead Data.
>[    4.563756] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    4.566427] systemd[1]: Started Collect Read-Ahead Data.
>[    4.569298] systemd[1]: Mounted Huge Pages File System.
>[    4.572153] systemd[1]: Mounted Debug File System.
>[    4.573630] systemd[1]: Started Create static device nodes in /dev.
>[    4.576515] systemd[1]: Mounted POSIX Message Queue File System.
>[    4.578031] systemd[1]: Mounted Temporary Directory.
>[    4.578236] systemd[1]: Starting udev Kernel Device Manager...
>[    4.582685] systemd[1]: Starting Load legacy module configuration...
>[    4.583755] systemd-udevd[3255]: starting version 204
>[    4.586926] systemd[1]: Started File System Check on Root Device.
>[    4.586952] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    4.591859] systemd[1]: Started Load Kernel Modules.
>[    4.591890] systemd[1]: Mounting FUSE Control File System...
>[    4.593823] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    4.596988] systemd[1]: Mounted Configuration File System.
>[    4.598269] systemd[1]: Started Set Up Additional Binary Formats.
>[    4.598302] systemd[1]: Starting Setup Virtual Console...
>[    4.603074] systemd[1]: Starting Apply Kernel Variables...
>[    4.606955] systemd[1]: Started udev Kernel Device Manager.
>[    4.608579] systemd[1]: Mounted FUSE Control File System.
>[    4.608824] systemd[1]: Starting LVM2 metadata daemon...
>[    4.612893] systemd[1]: Started udev Coldplug all Devices.
>[    4.614408] systemd[1]: Started Load legacy module configuration.
>[    4.615848] systemd[1]: Started Remount Root and Kernel File Systems.
>[    4.618726] systemd[1]: Started Setup Virtual Console.
>[    4.620166] systemd[1]: Started Apply Kernel Variables.
>[    4.622951] systemd[1]: Started LVM2 metadata daemon.
>[    4.624456] systemd[1]: Starting Local File Systems (Pre).
>[    4.627078] systemd[1]: Reached target Local File Systems (Pre).
>[    4.627092] systemd[1]: Starting Configure read-only root support...
>[    4.630022] systemd[1]: Started Import network configuration from initramfs.
>[    4.630092] systemd[1]: Starting Show Plymouth Boot Screen...
>[    4.667689] systemd-udevd[3264]: renamed network interface em1 to eno1
>[    4.701037] Adding 2047996k swap on /dev/sda1.  Priority:-1 extents:1 across:2047996k SS
>[    4.707978] audit: type=1305 audit(1406093994.706:2): audit_pid=3316 old=0 auid=4294967295 ses=4294967295 res=1
>[    4.725913] random: nonblocking pool is initialized
>[    4.972267] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    5.073047] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
>[    7.817727] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    7.818634] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
>[   55.073635] usb 2-1.1: USB disconnect, device number 3
>[   56.528486] usb 2-1.1: new low-speed USB device number 5 using ehci-pci
>[   56.610138] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[   56.611232] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   56.612296] usb 2-1.1: Product: USB Optical Mouse
>[   56.613347] usb 2-1.1: Manufacturer: Logitech
>[   56.616936] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0003/input/input8
>[   56.619296] hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[   98.782137] systemd-journald[2415]: File /var/log/journal/83f77253d6de403eae11669e37178dcb/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[  110.042137] usb 2-1.1: USB disconnect, device number 5
>[  111.497392] usb 2-1.1: new low-speed USB device number 6 using ehci-pci
>[  111.576791] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[  111.576845] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  111.576886] usb 2-1.1: Product: USB Optical Mouse
>[  111.576913] usb 2-1.1: Manufacturer: Logitech
>[  111.579467] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0004/input/input9
>[  111.579790] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[  165.010647] usb 2-1.1: USB disconnect, device number 6
>[  166.465230] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
>[  166.544633] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[  166.544687] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  166.544727] usb 2-1.1: Product: USB Optical Mouse
>[  166.544755] usb 2-1.1: Manufacturer: Logitech
>[  166.547332] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0005/input/input10
>[  166.547659] hid-generic 0003:046D:C05A.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[  219.979143] usb 2-1.1: USB disconnect, device number 7
>[  221.434111] usb 2-1.1: new low-speed USB device number 8 using ehci-pci
>[  221.523366] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[  221.523420] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  221.523460] usb 2-1.1: Product: USB Optical Mouse
>[  221.523488] usb 2-1.1: Manufacturer: Logitech
>[  221.526322] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0006/input/input11
>[  221.526619] hid-generic 0003:046D:C05A.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[  274.947638] usb 2-1.1: USB disconnect, device number 8
>[  276.402988] usb 2-1.1: new low-speed USB device number 9 using ehci-pci
>[  276.482496] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[  276.482551] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  276.482592] usb 2-1.1: Product: USB Optical Mouse
>[  276.482619] usb 2-1.1: Manufacturer: Logitech
>[  276.485336] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0007/input/input12
>[  276.485578] hid-generic 0003:046D:C05A.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[  296.099506] [drm:i915_gem_open] 
>[  296.099530] [drm:intel_crtc_cursor_set] cursor off
>[  296.099532] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[  296.099536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  296.099538] [drm:intel_crtc_cursor_set] cursor off
>[  296.099540] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  296.099542] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  296.099550] [drm:i915_gem_open] 
>[  296.099853] [drm:i915_gem_open] 
>[  296.099865] [drm:i915_gem_open] 
>[  296.099877] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[  296.099883] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
>[  296.099890] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[  296.099893] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[  296.099895] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[  296.099896] [drm:intel_display_power_get] enabling always-on
>[  296.099900] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40010, result 0
>[  296.099901] [drm:intel_crt_detect] CRT not detected via hotplug
>[  296.100137] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  296.100141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.100143] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  296.100144] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[  296.100566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.100567] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[  296.100569] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  296.100571] [drm:intel_display_power_put] disabling always-on
>[  296.100574] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] disconnected
>[  296.100579] [drm:drm_mode_getconnector] [CONNECTOR:10:?]
>[  296.100581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[  296.100582] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[  296.100584] [drm:intel_display_power_get] enabling always-on
>[  296.100587] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40010, result 0
>[  296.100588] [drm:intel_crt_detect] CRT not detected via hotplug
>[  296.100767] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  296.100769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.100771] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  296.100772] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[  296.101176] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.101177] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[  296.101179] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  296.101181] [drm:intel_display_power_put] disabling always-on
>[  296.101182] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] disconnected
>[  296.101207] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[  296.101209] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[  296.101210] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[  296.101212] [drm:intel_display_power_get] enabling always-on
>[  296.101372] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  296.101376] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.101378] [drm:intel_display_power_put] disabling always-on
>[  296.101380] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[  296.101386] [drm:drm_mode_getconnector] [CONNECTOR:13:?]
>[  296.101388] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[  296.101389] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[  296.101391] [drm:intel_display_power_get] enabling always-on
>[  296.101603] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  296.101606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.101608] [drm:intel_display_power_put] disabling always-on
>[  296.101610] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[  296.101633] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[  296.101634] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[  296.101637] [drm:intel_display_power_get] enabling always-on
>[  296.101639] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[  296.101642] [drm:intel_display_power_put] disabling always-on
>[  296.101643] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[  296.101645] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[  296.101646] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[  296.101648] [drm:intel_display_power_get] enabling always-on
>[  296.101649] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[  296.101652] [drm:intel_display_power_put] disabling always-on
>[  296.101653] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[  296.101668] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[  296.101669] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[  296.101671] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[  296.101673] [drm:intel_display_power_get] enabling always-on
>[  296.101885] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  296.101888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[  296.101890] [drm:intel_display_power_put] disabling always-on
>[  296.101893] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[  296.101898] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[  296.101899] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[  296.101901] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[  296.101903] [drm:intel_display_power_get] enabling always-on
>[  296.102114] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  296.102118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[  296.102119] [drm:intel_display_power_put] disabling always-on
>[  296.102121] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[  296.102143] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[  296.102145] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[  296.102146] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[  296.102148] [drm:intel_display_power_get] enabling always-on
>[  296.102308] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[  296.102309] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[  296.102311] [drm:intel_display_power_put] disabling always-on
>[  296.102312] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[  296.102315] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[  296.102317] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[  296.102318] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[  296.102319] [drm:intel_display_power_get] enabling always-on
>[  296.102512] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[  296.102515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[  296.102518] [drm:intel_display_power_put] disabling always-on
>[  296.102520] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[  296.102542] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[  296.102543] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[  296.102545] [drm:intel_display_power_get] enabling always-on
>[  296.102547] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[  296.102550] [drm:intel_display_power_put] disabling always-on
>[  296.102551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[  296.102554] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[  296.102555] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[  296.102556] [drm:intel_display_power_get] enabling always-on
>[  296.102558] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[  296.102560] [drm:intel_display_power_put] disabling always-on
>[  296.102562] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[  296.102575] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[  296.102577] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[  296.102578] [drm:intel_display_power_get] enabling always-on
>[  296.102579] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[  296.102582] [drm:intel_display_power_put] disabling always-on
>[  296.102584] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[  296.102585] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[  296.102587] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[  296.102589] [drm:intel_display_power_get] enabling always-on
>[  296.102590] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[  296.102593] [drm:intel_display_power_put] disabling always-on
>[  296.102594] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[  296.102776] [drm:drm_mode_setcrtc] [CRTC:5]
>[  296.102778] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[  296.102780] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  296.102784] [drm:drm_mode_setcrtc] [CRTC:8]
>[  296.102786] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  296.102788] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  296.199509] [drm:intel_runtime_suspend] Suspending device
>[  296.199525] [drm:intel_runtime_suspend] Device suspended
>[  296.321567] PM: Syncing filesystems ... done.
>[  296.322091] PM: Preparing system for mem sleep
>[  296.322182] Freezing user space processes ... (elapsed 0.000 seconds) done.
>[  296.323092] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[  296.324069] PM: Entering mem sleep
>[  296.324117] Suspending console(s) (use no_console_suspend to debug)
>[  296.324288] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  296.324593] sd 0:0:0:0: [sda] Stopping disk
>[  296.339304] serial 00:04: disabled
>[  296.339308] serial 00:04: System wakeup disabled by ACPI
>[  296.352100] [drm:intel_runtime_resume] Resuming device
>[  296.352103] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[  296.364018] [drm:intel_runtime_resume] Device resumed
>[  296.364021] [drm:intel_display_power_get] enabling always-on
>[  296.364249] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  296.364249] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  296.461935] PM: suspend of devices complete after 137.917 msecs
>[  296.472928] PM: late suspend of devices complete after 11.004 msecs
>[  296.473439] pcieport 0000:00:1c.6: System wakeup enabled by ACPI
>[  296.473491] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[  296.473573] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[  296.473664] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  296.484041] PM: noirq suspend of devices complete after 11.124 msecs
>[  296.484346] ACPI: Preparing to enter system sleep state S3
>[  296.485375] PM: Saving platform NVS memory
>[  296.485774] Disabling non-boot CPUs ...
>[  296.485991] Broke affinity for irq 23
>[  296.487128] smpboot: CPU 1 is now offline
>[  296.487537] Broke affinity for irq 16
>[  296.488719] smpboot: CPU 2 is now offline
>[  296.490291] smpboot: CPU 3 is now offline
>[  296.491584] ACPI: Low-level resume complete
>[  296.491631] PM: Restoring platform NVS memory
>[  296.492060] CPU0: Thermal LVT vector (0xfa) already installed
>[  296.492083] Enabling non-boot CPUs ...
>[  296.492115] x86: Booting SMP configuration:
>[  296.492116] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  296.503228] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[  296.503239] CPU1: Thermal LVT vector (0xfa) already installed
>[  296.505522] CPU1 is up
>[  296.505537] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[  296.516660] CPU2: Thermal LVT vector (0xfa) already installed
>[  296.518924] CPU2 is up
>[  296.518941] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[  296.530064] CPU3: Thermal LVT vector (0xfa) already installed
>[  296.532348] CPU3 is up
>[  296.534996] ACPI: Waking up from system sleep state S3
>[  296.546667] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  296.546701] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[  296.546803] pcieport 0000:00:1c.6: System wakeup disabled by ACPI
>[  296.546950] PM: noirq resume of devices complete after 11.507 msecs
>[  296.547143] hpet1: lost 200 rtc interrupts
>[  296.547223] PM: early resume of devices complete after 0.233 msecs
>[  296.547346] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[  296.547529] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[  296.548240] serial 00:04: activated
>[  296.548872] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  296.549181] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcbd6018
>[  296.549191] [drm:intel_opregion_setup] Public ACPI methods supported
>[  296.549191] [drm:intel_opregion_setup] SWSCI supported
>[  296.554248] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000041)
>[  296.554249] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[  296.554250] [drm:intel_opregion_setup] ASLE supported
>[  296.554252] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[  296.554255] [drm:ironlake_init_pch_refclk] Disabling SSC entirely
>[  296.554669] [drm:intel_crt_reset] pch crt adpa set to 0xf40000
>[  296.554672] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[  296.555010] [drm:init_status_page] bsd ring hws offset: 0x00163000
>[  296.555021] [drm:init_status_page] blitter ring hws offset: 0x00184000
>[  296.555082] [drm] Wrong MCH_SSKPD value: 0x16040307
>[  296.555082] [drm] This can cause pipe underruns and display issues.
>[  296.555083] [drm] Please upgrade your BIOS to fix this.
>[  296.555086] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled
>[  296.555087] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[  296.555092] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 0, on 0
>[  296.555097] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[  296.555100] [drm:intel_modeset_readout_hw_state] [ENCODER:11:DAC-11] hw state readout: disabled, pipe A
>[  296.555103] [drm:intel_modeset_readout_hw_state] [ENCODER:12:TMDS-12] hw state readout: disabled, pipe A
>[  296.555106] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A
>[  296.555108] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[  296.555111] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A
>[  296.555114] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[  296.555116] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[  296.555119] [drm:intel_modeset_readout_hw_state] [CONNECTOR:10:VGA-1] hw state readout: disabled
>[  296.555121] [drm:intel_modeset_readout_hw_state] [CONNECTOR:13:HDMI-A-1] hw state readout: disabled
>[  296.555124] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:DP-1] hw state readout: disabled
>[  296.555126] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-2] hw state readout: disabled
>[  296.555129] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-3] hw state readout: disabled
>[  296.555131] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled
>[  296.555133] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:DP-3] hw state readout: disabled
>[  296.555135] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  296.555136] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[  296.555137] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  296.555139] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[  296.555140] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  296.555141] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  296.555143] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  296.555144] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  296.555144] [drm:intel_dump_pipe_config] requested mode:
>[  296.555146] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  296.555147] [drm:intel_dump_pipe_config] adjusted mode:
>[  296.555149] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  296.555150] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  296.555151] [drm:intel_dump_pipe_config] port clock: 0
>[  296.555151] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  296.555153] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  296.555154] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  296.555154] [drm:intel_dump_pipe_config] ips: 0
>[  296.555155] [drm:intel_dump_pipe_config] double wide: 0
>[  296.555156] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  296.555157] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[  296.555157] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  296.555158] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[  296.555159] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  296.555160] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  296.555161] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  296.555162] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  296.555163] [drm:intel_dump_pipe_config] requested mode:
>[  296.555164] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  296.555165] [drm:intel_dump_pipe_config] adjusted mode:
>[  296.555166] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  296.555168] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  296.555168] [drm:intel_dump_pipe_config] port clock: 0
>[  296.555169] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  296.555170] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  296.555171] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  296.555171] [drm:intel_dump_pipe_config] ips: 0
>[  296.555172] [drm:intel_dump_pipe_config] double wide: 0
>[  296.555175] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  296.555177] [drm:intel_display_power_put] disabling always-on
>[  296.555179] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  296.555188] [drm:check_encoder_state] [ENCODER:11:DAC-11]
>[  296.555190] [drm:check_encoder_state] [ENCODER:12:TMDS-12]
>[  296.555193] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[  296.555195] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[  296.555197] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[  296.555199] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[  296.555201] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[  296.555203] [drm:check_crtc_state] [CRTC:5]
>[  296.555204] [drm:check_crtc_state] [CRTC:8]
>[  296.555205] [drm:check_shared_dpll_state] PCH DPLL A
>[  296.555209] [drm:check_shared_dpll_state] PCH DPLL B
>[  296.555220] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=0
>[  296.555221] [drm:intel_display_power_get] enabling always-on
>[  296.555224] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[  296.558349] sd 0:0:0:0: [sda] Starting disk
>[  296.564252] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[  296.564252] [drm:intel_crt_detect] CRT not detected via hotplug
>[  296.564439] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  296.564441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.564442] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  296.564443] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[  296.564851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.564852] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[  296.564853] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  296.564854] [drm:intel_display_power_put] disabling always-on
>[  296.564856] [drm:drm_helper_hpd_irq_event] [CONNECTOR:10:VGA-1] status updated from unknown to disconnected
>[  296.564857] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[  296.564858] [drm:intel_display_power_get] enabling always-on
>[  296.565047] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  296.565049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  296.565050] [drm:intel_display_power_put] disabling always-on
>[  296.565051] [drm:drm_helper_hpd_irq_event] [CONNECTOR:13:HDMI-A-1] status updated from unknown to disconnected
>[  296.565053] [drm:intel_display_power_get] enabling always-on
>[  296.565054] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[  296.565056] [drm:intel_display_power_put] disabling always-on
>[  296.565057] [drm:drm_helper_hpd_irq_event] [CONNECTOR:17:DP-1] status updated from unknown to disconnected
>[  296.565058] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[  296.565059] [drm:intel_display_power_get] enabling always-on
>[  296.565218] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  296.565219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[  296.565220] [drm:intel_display_power_put] disabling always-on
>[  296.565221] [drm:drm_helper_hpd_irq_event] [CONNECTOR:19:HDMI-A-2] status updated from unknown to disconnected
>[  296.565222] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[  296.565223] [drm:intel_display_power_get] enabling always-on
>[  296.565417] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[  296.565419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[  296.565420] [drm:intel_display_power_put] disabling always-on
>[  296.565422] [drm:drm_helper_hpd_irq_event] [CONNECTOR:21:HDMI-A-3] status updated from unknown to disconnected
>[  296.565423] [drm:intel_display_power_get] enabling always-on
>[  296.565424] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[  296.565426] [drm:intel_display_power_put] disabling always-on
>[  296.565427] [drm:drm_helper_hpd_irq_event] [CONNECTOR:23:DP-2] status updated from unknown to disconnected
>[  296.565428] [drm:intel_display_power_get] enabling always-on
>[  296.565428] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[  296.565430] [drm:intel_display_power_put] disabling always-on
>[  296.565431] [drm:drm_helper_hpd_irq_event] [CONNECTOR:25:DP-3] status updated from unknown to disconnected
>[  296.565452] i915: No ACPI video bus found
>[  296.572296] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
>[  296.667885] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
>[  296.713218] PM: resume of devices complete after 166.206 msecs
>[  296.720697] PM: Finishing wakeup.
>[  296.720698] Restarting tasks ... done.
>[  296.866857] ata5: SATA link down (SStatus 0 SControl 300)
>[  296.866898] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  296.866920] ata6: SATA link down (SStatus 0 SControl 300)
>[  296.868158] ata4.00: configured for UDMA/100
>[  296.868902] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  296.889702] ata1.00: configured for UDMA/133
>[  297.098610] firewire_core 0000:04:03.0: rediscovered device fw0
>[  298.330332] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  298.333956] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[  298.347935] [drm:intel_runtime_suspend] Suspending device
>[  298.347939] ------------[ cut here ]------------
>[  298.347965] WARNING: CPU: 0 PID: 674 at drivers/gpu/drm/i915/i915_gem.c:1628 i915_gem_release_all_mmaps+0x28/0x7e [i915]()
>[  298.347966] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev pcspkr serio_raw i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm firewire_ohci lpc_ich firewire_core crc_itu_t mfd_core snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[  298.347984] CPU: 0 PID: 674 Comm: kworker/0:1 Not tainted 3.16.0-rc6_drm-intel-fixes_a0d036_20140723+ #748
>[  298.347986] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
>[  298.347991] Workqueue: pm pm_runtime_work
>[  298.347992]  0000000000000000 0000000000000009 ffffffff81780c0d 0000000000000000
>[  298.347995]  ffffffff8103986c ffff880232bcbc90 ffffffffa007fe27 ffff880232bcbce8
>[  298.347997]  ffff880002810000 ffff8802342ce898 ffff880002817980 ffff8802347fa860
>[  298.348000] Call Trace:
>[  298.348004]  [<ffffffff81780c0d>] ? dump_stack+0x41/0x51
>[  298.348008]  [<ffffffff8103986c>] ? warn_slowpath_common+0x78/0x90
>[  298.348016]  [<ffffffffa007fe27>] ? i915_gem_release_all_mmaps+0x28/0x7e [i915]
>[  298.348024]  [<ffffffffa007fe27>] ? i915_gem_release_all_mmaps+0x28/0x7e [i915]
>[  298.348029]  [<ffffffffa0066433>] ? intel_runtime_suspend+0xe1/0x812 [i915]
>[  298.348033]  [<ffffffff81350d0f>] ? pci_pm_runtime_suspend+0x60/0x119
>[  298.348035]  [<ffffffff813decbc>] ? __rpm_callback+0x28/0x4c
>[  298.348038]  [<ffffffff813ded2b>] ? rpm_callback+0x4b/0x69
>[  298.348040]  [<ffffffff813df290>] ? rpm_suspend+0x262/0x417
>[  298.348047]  [<ffffffffa007178f>] ? intel_gen6_powersave_work+0xb5e/0xb6d [i915]
>[  298.348050]  [<ffffffff813e0047>] ? pm_runtime_work+0x65/0x7b
>[  298.348052]  [<ffffffff8104d636>] ? process_one_work+0x1e2/0x363
>[  298.348054]  [<ffffffff8104de16>] ? worker_thread+0x2f2/0x3f1
>[  298.348056]  [<ffffffff8104db24>] ? pool_mayday_timeout+0xf2/0xf2
>[  298.348059]  [<ffffffff8105258e>] ? kthread+0xc5/0xcd
>[  298.348062]  [<ffffffff810524c9>] ? kthread_freezable_should_stop+0x40/0x40
>[  298.348064]  [<ffffffff817866ac>] ? ret_from_fork+0x7c/0xb0
>[  298.348067]  [<ffffffff810524c9>] ? kthread_freezable_should_stop+0x40/0x40
>[  298.348069] ---[ end trace f4d02ff445e95fd8 ]---
>[  298.348083] [drm:intel_runtime_suspend] Device suspended
>[  298.431860] [drm:intel_runtime_resume] Resuming device
>[  298.431864] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[  298.443837] [drm:intel_runtime_resume] Device resumed
>[  298.443886] [drm:intel_crtc_cursor_set] cursor off
>[  298.443887] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[  298.443890] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  298.443891] [drm:intel_crtc_cursor_set] cursor off
>[  298.443892] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  298.443893] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  298.443895] [drm:drm_fb_helper_hotplug_event] 
>[  298.443897] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1]
>[  298.443898] [drm:intel_crt_detect] [CONNECTOR:10:VGA-1] force=1
>[  298.443899] [drm:intel_display_power_get] enabling always-on
>[  298.443902] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[  298.443903] [drm:intel_crt_detect] CRT not detected via hotplug
>[  298.444105] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  298.444106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  298.444107] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  298.444108] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[  298.444512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  298.444513] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[  298.444514] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  298.444515] [drm:intel_display_power_put] disabling always-on
>[  298.444517] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:10:VGA-1] disconnected
>[  298.444518] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1]
>[  298.444519] [drm:intel_hdmi_detect] [CONNECTOR:13:HDMI-A-1]
>[  298.444520] [drm:intel_display_power_get] enabling always-on
>[  298.444695] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  298.444697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  298.444698] [drm:intel_display_power_put] disabling always-on
>[  298.444699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:HDMI-A-1] disconnected
>[  298.444700] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1]
>[  298.444702] [drm:intel_display_power_get] enabling always-on
>[  298.444702] [drm:intel_dp_detect] [CONNECTOR:17:DP-1]
>[  298.444715] [drm:intel_display_power_put] disabling always-on
>[  298.444716] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:DP-1] disconnected
>[  298.444717] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2]
>[  298.444717] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-2]
>[  298.444718] [drm:intel_display_power_get] enabling always-on
>[  298.444896] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  298.444898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[  298.444899] [drm:intel_display_power_put] disabling always-on
>[  298.444901] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-2] disconnected
>[  298.444902] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3]
>[  298.444903] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-3]
>[  298.444904] [drm:intel_display_power_get] enabling always-on
>[  298.445118] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[  298.445120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[  298.445121] [drm:intel_display_power_put] disabling always-on
>[  298.445122] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-3] disconnected
>[  298.445123] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2]
>[  298.445125] [drm:intel_display_power_get] enabling always-on
>[  298.445126] [drm:intel_dp_detect] [CONNECTOR:23:DP-2]
>[  298.445128] [drm:intel_display_power_put] disabling always-on
>[  298.445129] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected
>[  298.445130] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3]
>[  298.445131] [drm:intel_display_power_get] enabling always-on
>[  298.445131] [drm:intel_dp_detect] [CONNECTOR:25:DP-3]
>[  298.445133] [drm:intel_display_power_put] disabling always-on
>[  298.445134] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-3] disconnected
>[  298.445136] [drm:drm_setup_crtcs] 
>[  298.445137] [drm:drm_enable_connectors] connector 10 enabled? no
>[  298.445138] [drm:drm_enable_connectors] connector 13 enabled? no
>[  298.445139] [drm:drm_enable_connectors] connector 17 enabled? no
>[  298.445140] [drm:drm_enable_connectors] connector 19 enabled? no
>[  298.445140] [drm:drm_enable_connectors] connector 21 enabled? no
>[  298.445141] [drm:drm_enable_connectors] connector 23 enabled? no
>[  298.445142] [drm:drm_enable_connectors] connector 25 enabled? no
>[  298.445143] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[  298.445144] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[  298.445145] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[  298.445146] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[  298.445146] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping
>[  298.445147] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[  298.445148] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
>[  298.445149] [drm:intel_fb_initial_config] Not using firmware configuration
>[  298.445150] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[  298.445152] [drm:intel_crtc_cursor_set] cursor off
>[  298.445153] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[  298.445155] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  298.445156] [drm:intel_crtc_cursor_set] cursor off
>[  298.445157] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  298.445159] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  298.447929] [drm:intel_crtc_cursor_set] cursor off
>[  298.447931] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[  298.447933] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  298.447935] [drm:intel_crtc_cursor_set] cursor off
>[  298.447936] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[  298.447938] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  299.317045] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[  299.317091] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
>[  300.327606] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  300.331369] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[  300.345379] [drm:intel_runtime_suspend] Suspending device
>[  300.345405] [drm:intel_runtime_suspend] Device suspended
>[  349.984610] usb 2-1.1: USB disconnect, device number 9
>[  351.439344] usb 2-1.1: new low-speed USB device number 10 using ehci-pci
>[  351.639833] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05a
>[  351.750255] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  351.860277] usb 2-1.1: Product: USB Optical Mouse
>[  351.969320] usb 2-1.1: Manufacturer: Logitech
>[  352.079601] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05A.0008/input/input16
>[  352.303077] hid-generic 0003:046D:C05A.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0

Actions: View

Attachments on bug 80081: 101147 | 103317

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.