Attachment 107791 Details for Bug 84919 – dmesg output of first resume from standby

dmesg output of first resume from standby

resume1.log (text/plain), 44.46 KB, created by tigrangab on 2014-10-13 20:54:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: tigrangab

Created: 2014-10-13 20:54:28 UTC

Size: 44.46 KB

patch

obsolete

>[  121.473089] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  121.558628] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937
>[  121.558633] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  121.574507] wlp2s0: deauthenticating from 00:24:6c:a9:2f:39 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  121.576127] [drm:intel_edp_backlight_off] 
>[  121.581052] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  121.581620] cfg80211: Calling CRDA for country: US
>[  121.605138] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  121.779632] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  121.792980] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  121.792989] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  121.793185] [drm:intel_edp_panel_off] Turn eDP power off
>[  121.793193] [drm:wait_panel_off] Wait for panel power off time
>[  121.793198] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  121.846250] [drm:wait_panel_status] Wait complete
>[  121.846259] [drm:intel_update_fbc] no output, disabling
>[  121.846262] [drm:intel_display_power_put] disabling always-on
>[  121.846267] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  121.846269] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  121.846270] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  121.846272] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  121.846273] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  121.846275] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  121.846276] [drm:check_crtc_state] [CRTC:7]
>[  121.846279] [drm:check_crtc_state] [CRTC:11]
>[  121.846280] [drm:check_crtc_state] [CRTC:15]
>[  121.846282] [drm:check_shared_dpll_state] WRPLL 1
>[  121.846283] [drm:check_shared_dpll_state] WRPLL 2
>[  121.846301] [drm:drm_mode_setcrtc] [CRTC:7]
>[  121.846303] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[  121.846305] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  121.846307] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [NOCRTC]
>[  121.846308] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  121.846310] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  121.846311] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[  121.846314] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  121.846318] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  121.846320] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  121.846321] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  121.846323] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  121.846324] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  121.846326] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  121.846327] [drm:check_crtc_state] [CRTC:7]
>[  121.846328] [drm:check_crtc_state] [CRTC:11]
>[  121.846330] [drm:check_crtc_state] [CRTC:15]
>[  121.846331] [drm:check_shared_dpll_state] WRPLL 1
>[  121.846332] [drm:check_shared_dpll_state] WRPLL 2
>[  121.846336] [drm:intel_crtc_cursor_set_obj] cursor off
>[  122.723489] [drm:intel_display_power_get] enabling display
>[  122.723494] [drm:hsw_set_power_well] Enabling power well
>[  123.023614] ata1.00: exception Emask 0x10 SAct 0x40000 SErr 0x50000 action 0xe frozen
>[  123.023618] ata1.00: irq_stat 0x00400000, PHY RDY changed
>[  123.023620] ata1: SError: { PHYRdyChg CommWake }
>[  123.023623] ata1.00: failed command: READ FPDMA QUEUED
>[  123.023627] ata1.00: cmd 60/20:90:38:4b:11/00:00:03:00:00/40 tag 18 ncq 16384 in
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  123.023630] ata1.00: status: { DRDY }
>[  123.023633] ata1: hard resetting link
>[  123.744121] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  123.843267] ata1.00: configured for UDMA/133
>[  123.854188] ata1: EH complete
>[  123.910705] PM: Syncing filesystems ... done.
>[  124.050369] PM: Preparing system for mem sleep
>[  124.050671] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  124.052153] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  124.053244] PM: Entering mem sleep
>[  124.053264] Suspending console(s) (use no_console_suspend to debug)
>[  124.053570] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  124.060766] sd 0:0:0:0: [sda] Stopping disk
>[  124.068258] [drm:intel_display_power_get] enabling always-on
>[  124.074194] [drm:intel_display_power_put] disabling always-on
>[  124.080956] [drm:intel_display_power_put] disabling display
>[  124.080962] [drm:hsw_set_power_well] Requesting to disable the power well
>[  124.401075] PM: suspend of devices complete after 347.487 msecs
>[  124.401300] [drm:hsw_enable_pc8] Enabling package C8+
>[  124.441160] PM: late suspend of devices complete after 40.057 msecs
>[  124.441729] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  124.441812] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  124.454780] PM: noirq suspend of devices complete after 13.609 msecs
>[  124.455173] ACPI: Preparing to enter system sleep state S3
>[  124.456512] PM: Saving platform NVS memory
>[  124.456516] Disabling non-boot CPUs ...
>[  124.456542] intel_pstate CPU 1 exiting
>[  124.458012] kvm: disabling virtualization on CPU1
>[  124.458069] smpboot: CPU 1 is now offline
>[  124.459051] intel_pstate CPU 2 exiting
>[  124.460460] kvm: disabling virtualization on CPU2
>[  124.561127] smpboot: CPU 2 is now offline
>[  124.561522] intel_pstate CPU 3 exiting
>[  124.562823] kvm: disabling virtualization on CPU3
>[  124.562833] smpboot: CPU 3 is now offline
>[  124.566562] ACPI: Low-level resume complete
>[  124.566646] PM: Restoring platform NVS memory
>[  124.567064] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x18
>[  124.567094] Enabling non-boot CPUs ...
>[  124.567154] x86: Booting SMP configuration:
>[  124.567156] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  124.579733] kvm: enabling virtualization on CPU1
>[  124.582099] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[  124.585137] microcode: CPU1 updated to revision 0x18, date = 2014-05-23
>[  124.585160] CPU1 is up
>[  124.585189] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  124.597599] kvm: enabling virtualization on CPU2
>[  124.599861] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[  124.601318] microcode: CPU2 updated to revision 0x18, date = 2014-05-23
>[  124.601328] CPU2 is up
>[  124.601360] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  124.613633] kvm: enabling virtualization on CPU3
>[  124.615944] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x18
>[  124.615951] CPU3 is up
>[  124.620427] ACPI: Waking up from system sleep state S3
>[  124.622052] acpi LNXPOWER:01: Turning OFF
>[  124.622061] acpi LNXPOWER:00: Turning OFF
>[  124.688574] pci 0000:03:00.0: Refused to change power state, currently in D3
>[  124.701752] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  124.701790] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  124.749858] PM: noirq resume of devices complete after 61.616 msecs
>[  124.749890] [drm:hsw_disable_pc8] Disabling package C8+
>[  124.768327] [drm:intel_display_power_get] enabling always-on
>[  124.768328] [drm:intel_display_power_get] enabling display
>[  124.768399] PM: early resume of devices complete after 18.511 msecs
>[  124.768538] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[  124.768585] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X
>[  124.768674] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
>[  124.770387] [drm:intel_opregion_setup] graphic opregion physical addr: 0xaafb4018
>[  124.770398] [drm:intel_opregion_setup] Public ACPI methods supported
>[  124.770399] [drm:intel_opregion_setup] SWSCI supported
>[  124.773184] rtc_cmos 00:01: System wakeup disabled by ACPI
>[  124.781656] sd 0:0:0:0: [sda] Starting disk
>[  124.788228] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  124.788229] [drm:intel_opregion_setup] ASLE supported
>[  124.808261] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[  124.814930] [drm:init_status_page] bsd ring hws offset: 0x0081b000
>[  124.814959] [drm:init_status_page] blitter ring hws offset: 0x0083c000
>[  124.821594] [drm:init_status_page] video enhancement ring hws offset: 0x0085d000
>[  124.821710] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled
>[  124.821711] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[  124.821712] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled
>[  124.821713] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[  124.821714] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[  124.821715] [drm:intel_modeset_readout_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[  124.821716] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[  124.821717] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
>[  124.821717] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe A
>[  124.821718] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe B
>[  124.821719] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DP MST-32] hw state readout: disabled, pipe C
>[  124.821720] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:eDP-1] hw state readout: disabled
>[  124.821721] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-1] hw state readout: disabled
>[  124.821721] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:DP-1] hw state readout: disabled
>[  124.821722] [drm:intel_modeset_readout_hw_state] [CONNECTOR:33:HDMI-A-2] hw state readout: disabled
>[  124.821724] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  124.821725] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[  124.821725] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  124.821727] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
>[  124.821727] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  124.821728] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  124.821728] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821729] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821729] [drm:intel_dump_pipe_config] requested mode:
>[  124.821731] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  124.821731] [drm:intel_dump_pipe_config] adjusted mode:
>[  124.821732] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  124.821733] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  124.821733] [drm:intel_dump_pipe_config] port clock: 0
>[  124.821734] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  124.821734] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  124.821735] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  124.821735] [drm:intel_dump_pipe_config] ips: 0
>[  124.821736] [drm:intel_dump_pipe_config] double wide: 0
>[  124.821736] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  124.821737] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[  124.821737] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  124.821738] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B
>[  124.821738] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  124.821739] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  124.821739] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821740] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821740] [drm:intel_dump_pipe_config] requested mode:
>[  124.821741] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  124.821741] [drm:intel_dump_pipe_config] adjusted mode:
>[  124.821742] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  124.821743] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  124.821743] [drm:intel_dump_pipe_config] port clock: 0
>[  124.821744] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  124.821744] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  124.821745] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  124.821745] [drm:intel_dump_pipe_config] ips: 0
>[  124.821745] [drm:intel_dump_pipe_config] double wide: 0
>[  124.821746] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  124.821746] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[  124.821747] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  124.821747] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C
>[  124.821748] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[  124.821748] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  124.821749] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821749] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  124.821749] [drm:intel_dump_pipe_config] requested mode:
>[  124.821750] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  124.821751] [drm:intel_dump_pipe_config] adjusted mode:
>[  124.821751] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  124.821752] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  124.821753] [drm:intel_dump_pipe_config] port clock: 0
>[  124.821753] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  124.821753] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  124.821754] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  124.821754] [drm:intel_dump_pipe_config] ips: 0
>[  124.821754] [drm:intel_dump_pipe_config] double wide: 0
>[  124.821759] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  124.821760] [drm:intel_display_power_put] disabling always-on
>[  124.821761] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  124.821762] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  124.821764] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  124.821765] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  124.821765] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  124.821766] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  124.821766] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  124.821767] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  124.821767] [drm:check_crtc_state] [CRTC:7]
>[  124.821768] [drm:check_crtc_state] [CRTC:11]
>[  124.821769] [drm:check_crtc_state] [CRTC:15]
>[  124.821770] [drm:check_shared_dpll_state] WRPLL 1
>[  124.821770] [drm:check_shared_dpll_state] WRPLL 2
>[  125.088580] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  125.088588] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  125.088589] usb 1-7: hub failed to enable device, error -22
>[  125.101757] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  125.101770] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  125.101793] ata3: SATA link down (SStatus 0 SControl 300)
>[  125.101803] ata4: SATA link down (SStatus 0 SControl 300)
>[  125.102812] ata1.00: configured for UDMA/133
>[  125.106042] ata2.00: configured for UDMA/133
>[  125.248514] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  125.248582] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  125.248583] usb 1-7: hub failed to enable device, error -22
>[  125.408604] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  125.422604] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6900
>[  125.422606] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6948
>[  125.422606] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6990
>[  125.422607] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55a80
>[  125.422608] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55ac8
>[  125.582238] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  125.582351] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  125.582352] usb 1-6: hub failed to enable device, error -22
>[  125.742155] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  125.742251] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  125.742265] usb 1-6: hub failed to enable device, error -22
>[  125.902321] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  125.975809] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802424fc2a0
>[  126.075802] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  126.075808] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  126.075809] usb 1-4: hub failed to enable device, error -22
>[  126.215747] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  126.229055] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[  126.235774] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  126.235844] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  126.235845] usb 1-4: hub failed to enable device, error -22
>[  126.395874] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  126.409385] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f00
>[  126.409387] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f48
>[  126.409387] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f90
>[  126.410008] PM: resume of devices complete after 1640.672 msecs
>[  126.410396] PM: Finishing wakeup.
>[  126.410398] Restarting tasks ... 
>[  126.410549] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  126.410749] [drm:drm_mode_setcrtc] [CRTC:7]
>[  126.410753] [drm:drm_mode_setcrtc] [CONNECTOR:18:eDP-1]
>[  126.410756] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0)
>[  126.410759] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  126.410761] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  126.410762] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  126.410764] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7]
>[  126.410766] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  126.410767] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  126.410770] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  126.410772] [drm:connected_sink_compute_bpp] [CONNECTOR:18:eDP-1] checking for sink bpp constrains
>[  126.410774] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[  126.410777] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 136620KHz
>[  126.410779] [drm:intel_dp_compute_config] using min 1 lanes per VBT
>[  126.410780] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  126.410782] [drm:intel_dp_compute_config] DP link bw 06 lane count 2 clock 162000 bpp 18
>[  126.410783] [drm:intel_dp_compute_config] DP link bw required 245916 available 259200
>[  126.410786] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[  126.410788] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[  126.410789] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  126.410791] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  126.410793] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  126.410795] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 3979345, gmch_n: 4194304, link_m: 221074, link_n: 262144, tu: 64
>[  126.410797] [drm:intel_dump_pipe_config] requested mode:
>[  126.410800] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x0 0xa
>[  126.410802] [drm:intel_dump_pipe_config] adjusted mode:
>[  126.410805] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x48 0xa
>[  126.410807] [drm:intel_dump_crtc_timings] crtc timings: 136620 1920 1964 1992 2070 1080 1082 1086 1100, type: 0x48 flags: 0xa
>[  126.410809] [drm:intel_dump_pipe_config] port clock: 162000
>[  126.410810] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  126.410812] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  126.410814] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  126.410815] [drm:intel_dump_pipe_config] ips: 1
>[  126.410817] [drm:intel_dump_pipe_config] double wide: 0
>[  126.410821] [drm:intel_display_power_get] enabling always-on
>[  126.410841] [drm:ironlake_update_primary_plane] Writing base 019D2000 00000000 0 0 7680
>[  126.410847] [drm:intel_edp_panel_on] Turn eDP power on
>[  126.410849] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  126.410852] pci_bus 0000:01: Allocating resources
>[  126.410853] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  126.410855] [drm:wait_panel_status] Wait complete
>[  126.410859] [drm:wait_panel_on] Wait for panel power on
>[  126.410863] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  126.410871] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>[  126.410877] pci_bus 0000:02: Allocating resources
>[  126.410889] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[  126.410892] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[  126.410897] pci_bus 0000:03: Allocating resources
>[  126.410908] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  126.410913] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[  126.410916] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[  126.410918] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[  126.410925] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref]
>[  126.410930] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xafd00000-0xafefffff 64bit pref]
>[  126.410935] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
>[  126.410978] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  126.411252] pci_bus 0000:01: Allocating resources
>[  126.411264] pci_bus 0000:02: Allocating resources
>[  126.411276] pci_bus 0000:03: Allocating resources
>[  126.411285] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  126.411317] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  126.422123] done.
>[  126.423311] Bluetooth: hci0: read Intel version: 370710010002030d00
>[  126.423315] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
>[  126.537993] r8169 0000:01:00.0 enp1s0: link down
>[  126.538022] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  126.559826] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  126.560045] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  126.571186] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  126.579412] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[  126.622618] [drm:wait_panel_status] Wait complete
>[  126.622624] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  126.622630] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  126.623721] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  126.624172] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  126.624614] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  126.625055] [drm:intel_dp_start_link_train] clock recovery OK
>[  126.625805] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  126.626555] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  126.627297] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  126.627524] [drm:intel_edp_backlight_on] 
>[  126.627526] [drm:intel_panel_enable_backlight] pipe A
>[  126.627529] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  126.629255] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[  126.662637] [drm:intel_update_fbc] disabled per chip default
>[  126.662642] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1]
>[  126.662645] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  126.662646] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  126.662647] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  126.662649] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  126.662649] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  126.662650] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  126.662651] [drm:check_crtc_state] [CRTC:7]
>[  126.662657] [drm:check_crtc_state] [CRTC:11]
>[  126.662658] [drm:check_crtc_state] [CRTC:15]
>[  126.662659] [drm:check_shared_dpll_state] WRPLL 1
>[  126.662660] [drm:check_shared_dpll_state] WRPLL 2
>[  126.662677] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[  126.662678] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  126.662722] [drm:add_framebuffer_internal] [FB:41]
>[  127.386071] ------------[ cut here ]------------
>[  127.386088] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  127.386089] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  127.386124]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  127.386144] CPU: 1 PID: 358 Comm: kworker/1:3 Not tainted 3.17.0-1-mainline #1
>[  127.386145] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  127.386149] Workqueue: events reg_todo [cfg80211]
>[  127.386150]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  127.386152]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88009ffe5380
>[  127.386153]  ffff88023a974260 ffff88009ffe539c 0000000000000000 ffff88024f258000
>[  127.386155] Call Trace:
>[  127.386160]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  127.386163]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  127.386164]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  127.386168]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  127.386171]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  127.386174]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  127.386176]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  127.386177]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  127.386180]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  127.386182]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  127.386184]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  127.386186]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  127.386187] ---[ end trace d124c33bf30aae89 ]---
>[  127.386188] cfg80211: Calling CRDA for country: US
>[  127.609169] ------------[ cut here ]------------
>[  127.609185] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  127.609186] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  127.609222]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  127.609242] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  127.609243] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  127.609246] Workqueue: events reg_todo [cfg80211]
>[  127.609247]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  127.609249]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88009ffe5380
>[  127.609251]  ffff88023a974260 ffff88009ffe539c 0000000000000000 ffff88024f258000
>[  127.609252] Call Trace:
>[  127.609257]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  127.609260]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  127.609261]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  127.609265]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  127.609268]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  127.609271]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  127.609273]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  127.609274]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  127.609277]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  127.609279]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  127.609281]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  127.609283]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  127.609284] ---[ end trace d124c33bf30aae8a ]---
>[  127.609285] cfg80211: Calling CRDA for country: US
>[  127.689012] ------------[ cut here ]------------
>[  127.689032] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  127.689033] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  127.689071]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  127.689094] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  127.689095] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  127.689098] Workqueue: events reg_todo [cfg80211]
>[  127.689100]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  127.689101]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88009ffe5380
>[  127.689103]  ffff88023a974260 ffff88009ffe539c 0000000000000000 ffff88024f258000
>[  127.689104] Call Trace:
>[  127.689110]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  127.689113]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  127.689115]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  127.689118]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  127.689121]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  127.689125]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  127.689126]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  127.689128]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  127.689131]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  127.689133]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  127.689135]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  127.689137]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  127.689138] ---[ end trace d124c33bf30aae8b ]---
>[  127.689139] cfg80211: Calling CRDA for country: US
>[  129.629510] ------------[ cut here ]------------
>[  129.629532] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  129.629534] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  129.629582]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  129.629620] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  129.629622] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  129.629630] Workqueue: events reg_todo [cfg80211]
>[  129.629632]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  129.629635]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88009ffe5380
>[  129.629636]  ffff88023a974260 ffff88009ffe539c 0000000000000000 ffff88024f258000
>[  129.629639] Call Trace:
>[  129.629644]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  129.629647]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  129.629669]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  129.629676]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  129.629693]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  129.629700]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  129.629703]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  129.629707]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  129.629714]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  129.629718]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  129.629722]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  129.629726]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  129.629728] ---[ end trace d124c33bf30aae8c ]---
>[  129.629731] cfg80211: Calling CRDA for country: US
>[  129.631014] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  129.631025] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  129.796656] ------------[ cut here ]------------
>[  129.796675] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  129.796676] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  129.796702]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  129.796723] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  129.796724] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  129.796728] Workqueue: events reg_todo [cfg80211]
>[  129.796729]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  129.796731]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88009ffe5380
>[  129.796732]  ffff88023a974260 ffff88009ffe539c 0000000000000000 ffff88024f258000
>[  129.796734] Call Trace:
>[  129.796739]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  129.796742]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  129.796743]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  129.796747]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  129.796750]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  129.796753]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  129.796754]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  129.796756]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  129.796759]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  129.796761]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  129.796763]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  129.796764]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  129.796765] ---[ end trace d124c33bf30aae8d ]---
>[  129.796767] cfg80211: Calling CRDA for country: US
>[  129.962740] ------------[ cut here ]------------
>[  129.962757] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  129.962759] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  129.962784]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  129.962804] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  129.962805] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  129.962808] Workqueue: events reg_todo [cfg80211]
>[  129.962810]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  129.962812]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88009ffe5380
>[  129.962813]  ffff88023a974260 ffff88009ffe539c 0000000000000000 ffff88024f258000
>[  129.962815] Call Trace:
>[  129.962820]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  129.962822]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  129.962824]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  129.962827]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  129.962831]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  129.962834]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  129.962836]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  129.962837]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  129.962840]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  129.962842]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  129.962844]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  129.962846]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  129.962847] ---[ end trace d124c33bf30aae8e ]---
>[  129.962848] cfg80211: Calling CRDA for country: US
>[  130.191486] wlp2s0: authenticate with 00:24:6c:a9:2f:31
>[  130.193659] wlp2s0: send auth to 00:24:6c:a9:2f:31 (try 1/3)
>[  130.205876] wlp2s0: authenticated
>[  130.207975] wlp2s0: associate with 00:24:6c:a9:2f:31 (try 1/3)
>[  130.225364] wlp2s0: RX AssocResp from 00:24:6c:a9:2f:31 (capab=0x31 status=0 aid=13)
>[  130.227176] wlp2s0: associated
>[  130.227218] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  130.508234] [drm:intel_display_power_put] disabling display
>[  130.508238] [drm:hsw_set_power_well] Requesting to disable the power well
>[  132.736541] wlp2s0: deauthenticated from 00:24:6c:a9:2f:31 (Reason: 3=DEAUTH_LEAVING)
>[  132.779557] cfg80211: Calling CRDA to update world regulatory domain
>[  133.005497] cfg80211: Calling CRDA to update world regulatory domain
>[  133.033632] wlp2s0: authenticate with 00:24:6c:a9:2f:39
>[  133.036079] wlp2s0: send auth to 00:24:6c:a9:2f:39 (try 1/3)
>[  133.036972] wlp2s0: authenticated
>[  133.039576] wlp2s0: associate with 00:24:6c:a9:2f:39 (try 1/3)
>[  133.041994] wlp2s0: RX AssocResp from 00:24:6c:a9:2f:39 (capab=0x511 status=0 aid=7)
>[  133.042753] wlp2s0: associated
>[  133.042795] cfg80211: Calling CRDA to update world regulatory domain
>[  133.136404] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 00:24:6c:a9:2f:39
>[  150.866891] cfg80211: Calling CRDA to update world regulatory domain
>[  150.895661] cfg80211: Calling CRDA to update world regulatory domain
>[  153.470551] cfg80211: Calling CRDA to update world regulatory domain
>[  153.633319] cfg80211: Calling CRDA to update world regulatory domain
>[  153.661847] cfg80211: Calling CRDA to update world regulatory domain

Actions: View

Attachments on bug 84919: 107790 | 107791 | 107792 | 107793

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.