Attachment 107792 Details for Bug 84919 – dmesg output of second resume from standby

dmesg output of second resume from standby

resume2.log (text/plain), 28.62 KB, created by tigrangab on 2014-10-13 20:55:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: tigrangab

Created: 2014-10-13 20:55:51 UTC

Size: 28.62 KB

patch

obsolete

>[  167.666312] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  167.752654] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937
>[  167.752659] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  167.756213] [drm:intel_edp_backlight_off] 
>[  167.767866] wlp2s0: deauthenticating from 00:24:6c:a9:2f:39 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  167.774132] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  167.775353] cfg80211: Calling CRDA to update world regulatory domain
>[  167.796249] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  167.959724] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  167.973074] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  167.973082] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  167.973257] [drm:intel_edp_panel_off] Turn eDP power off
>[  167.973261] [drm:wait_panel_off] Wait for panel power off time
>[  167.973264] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  168.026350] [drm:wait_panel_status] Wait complete
>[  168.026359] [drm:intel_update_fbc] no output, disabling
>[  168.026362] [drm:intel_display_power_put] disabling always-on
>[  168.026366] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  168.026368] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  168.026370] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  168.026372] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  168.026373] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  168.026374] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  168.026376] [drm:check_crtc_state] [CRTC:7]
>[  168.026378] [drm:check_crtc_state] [CRTC:11]
>[  168.026379] [drm:check_crtc_state] [CRTC:15]
>[  168.026381] [drm:check_shared_dpll_state] WRPLL 1
>[  168.026383] [drm:check_shared_dpll_state] WRPLL 2
>[  168.026399] [drm:drm_mode_setcrtc] [CRTC:7]
>[  168.026401] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[  168.026404] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  168.026406] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [NOCRTC]
>[  168.026407] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  168.026408] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  168.026410] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[  168.026412] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  168.026417] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  168.026419] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  168.026421] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  168.026422] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  168.026423] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  168.026425] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  168.026426] [drm:check_crtc_state] [CRTC:7]
>[  168.026427] [drm:check_crtc_state] [CRTC:11]
>[  168.026429] [drm:check_crtc_state] [CRTC:15]
>[  168.026430] [drm:check_shared_dpll_state] WRPLL 1
>[  168.026431] [drm:check_shared_dpll_state] WRPLL 2
>[  168.026435] [drm:intel_crtc_cursor_set_obj] cursor off
>[  168.883561] [drm:intel_display_power_get] enabling display
>[  168.883574] [drm:hsw_set_power_well] Enabling power well
>[  169.199563] PM: Syncing filesystems ... 
>[  169.207092] ata1.00: exception Emask 0x10 SAct 0x3ff0000 SErr 0x50000 action 0xe frozen
>[  169.207095] ata1.00: irq_stat 0x00400000, PHY RDY changed
>[  169.207106] ata1: SError: { PHYRdyChg CommWake }
>[  169.207108] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207111] ata1.00: cmd 61/08:80:00:18:9b/00:00:04:00:00/40 tag 16 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207112] ata1.00: status: { DRDY }
>[  169.207113] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207115] ata1.00: cmd 61/08:88:08:18:b8/00:00:00:00:00/40 tag 17 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207117] ata1.00: status: { DRDY }
>[  169.207118] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207120] ata1.00: cmd 61/08:90:28:18:b8/00:00:00:00:00/40 tag 18 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207121] ata1.00: status: { DRDY }
>[  169.207122] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207124] ata1.00: cmd 61/08:98:38:18:b8/00:00:00:00:00/40 tag 19 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207125] ata1.00: status: { DRDY }
>[  169.207125] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207127] ata1.00: cmd 61/10:a0:50:18:b8/00:00:00:00:00/40 tag 20 ncq 8192 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207129] ata1.00: status: { DRDY }
>[  169.207129] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207131] ata1.00: cmd 61/08:a8:80:18:b8/00:00:00:00:00/40 tag 21 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207132] ata1.00: status: { DRDY }
>[  169.207133] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207135] ata1.00: cmd 61/10:b0:98:18:b8/00:00:00:00:00/40 tag 22 ncq 8192 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207136] ata1.00: status: { DRDY }
>[  169.207137] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207139] ata1.00: cmd 61/18:b8:b0:18:b8/00:00:00:00:00/40 tag 23 ncq 12288 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207141] ata1.00: status: { DRDY }
>[  169.207141] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207143] ata1.00: cmd 61/08:c0:d8:18:b8/00:00:00:00:00/40 tag 24 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207144] ata1.00: status: { DRDY }
>[  169.207145] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207147] ata1.00: cmd 61/20:c8:f0:18:b8/00:00:00:00:00/40 tag 25 ncq 16384 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207148] ata1.00: status: { DRDY }
>[  169.207151] ata1: hard resetting link
>[  169.927523] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  170.025692] ata1.00: configured for UDMA/133
>[  170.037611] ata1: EH complete
>[  170.145864] done.
>[  170.145869] PM: Preparing system for mem sleep
>[  170.146087] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  170.147464] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  170.148570] PM: Entering mem sleep
>[  170.148585] Suspending console(s) (use no_console_suspend to debug)
>[  170.148830] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  170.154511] sd 0:0:0:0: [sda] Stopping disk
>[  170.164612] [drm:intel_display_power_get] enabling always-on
>[  170.170995] [drm:intel_display_power_put] disabling always-on
>[  170.177646] [drm:intel_display_power_put] disabling display
>[  170.177649] [drm:hsw_set_power_well] Requesting to disable the power well
>[  170.461204] PM: suspend of devices complete after 312.336 msecs
>[  170.461430] [drm:hsw_enable_pc8] Enabling package C8+
>[  170.501211] PM: late suspend of devices complete after 39.979 msecs
>[  170.501980] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  170.504662] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  170.518127] PM: noirq suspend of devices complete after 16.903 msecs
>[  170.518409] ACPI: Preparing to enter system sleep state S3
>[  170.519685] PM: Saving platform NVS memory
>[  170.519689] Disabling non-boot CPUs ...
>[  170.519706] intel_pstate CPU 1 exiting
>[  170.520920] kvm: disabling virtualization on CPU1
>[  170.621195] smpboot: CPU 1 is now offline
>[  170.621422] intel_pstate CPU 2 exiting
>[  170.622618] kvm: disabling virtualization on CPU2
>[  170.724589] smpboot: CPU 2 is now offline
>[  170.724812] intel_pstate CPU 3 exiting
>[  170.726168] kvm: disabling virtualization on CPU3
>[  170.827999] smpboot: CPU 3 is now offline
>[  170.831867] ACPI: Low-level resume complete
>[  170.831952] PM: Restoring platform NVS memory
>[  170.832373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x18
>[  170.832398] Enabling non-boot CPUs ...
>[  170.832458] x86: Booting SMP configuration:
>[  170.832460] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  170.845018] kvm: enabling virtualization on CPU1
>[  170.847396] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[  170.850223] microcode: CPU1 updated to revision 0x18, date = 2014-05-23
>[  170.850243] CPU1 is up
>[  170.850274] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  170.862699] kvm: enabling virtualization on CPU2
>[  170.864956] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[  170.866425] microcode: CPU2 updated to revision 0x18, date = 2014-05-23
>[  170.866446] CPU2 is up
>[  170.866478] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  170.878799] kvm: enabling virtualization on CPU3
>[  170.881098] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x18
>[  170.881109] CPU3 is up
>[  170.886049] ACPI: Waking up from system sleep state S3
>[  170.887622] acpi LNXPOWER:01: Turning OFF
>[  170.898557] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  170.898572] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  174.952325] PM: noirq resume of devices complete after 4062.328 msecs
>[  174.952407] [drm:hsw_disable_pc8] Disabling package C8+
>[  174.957544] [drm:intel_display_power_get] enabling always-on
>[  174.957546] [drm:intel_display_power_get] enabling display
>[  174.957655] PM: early resume of devices complete after 5.285 msecs
>[  174.958032] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
>[  174.958046] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
>[  174.958531] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
>[  174.964135] rtc_cmos 00:01: System wakeup disabled by ACPI
>[  174.966019] [drm:intel_opregion_setup] graphic opregion physical addr: 0xaafb4018
>[  174.966040] [drm:intel_opregion_setup] Public ACPI methods supported
>[  174.966042] [drm:intel_opregion_setup] SWSCI supported
>[  174.971043] sd 0:0:0:0: [sda] Starting disk
>[  174.984176] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  174.984177] [drm:intel_opregion_setup] ASLE supported
>[  175.004159] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[  175.010834] [drm:init_status_page] bsd ring hws offset: 0x0081b000
>[  175.010863] [drm:init_status_page] blitter ring hws offset: 0x0083c000
>[  175.010883] [drm:init_status_page] video enhancement ring hws offset: 0x0085d000
>[  175.010974] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled
>[  175.010975] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[  175.010976] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled
>[  175.010977] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[  175.010978] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[  175.010979] [drm:intel_modeset_readout_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[  175.010980] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[  175.010981] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
>[  175.010982] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe A
>[  175.010982] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe B
>[  175.010983] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DP MST-32] hw state readout: disabled, pipe C
>[  175.010984] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:eDP-1] hw state readout: disabled
>[  175.010985] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-1] hw state readout: disabled
>[  175.010985] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:DP-1] hw state readout: disabled
>[  175.010986] [drm:intel_modeset_readout_hw_state] [CONNECTOR:33:HDMI-A-2] hw state readout: disabled
>[  175.010988] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  175.010989] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[  175.010989] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  175.010991] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
>[  175.010991] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  175.010992] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  175.010992] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.010993] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.010993] [drm:intel_dump_pipe_config] requested mode:
>[  175.010995] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.010995] [drm:intel_dump_pipe_config] adjusted mode:
>[  175.010996] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.010997] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  175.010997] [drm:intel_dump_pipe_config] port clock: 0
>[  175.010998] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  175.010998] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  175.010999] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  175.010999] [drm:intel_dump_pipe_config] ips: 0
>[  175.011000] [drm:intel_dump_pipe_config] double wide: 0
>[  175.011000] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  175.011001] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[  175.011001] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  175.011002] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B
>[  175.011002] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  175.011003] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  175.011003] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011004] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011004] [drm:intel_dump_pipe_config] requested mode:
>[  175.011005] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011005] [drm:intel_dump_pipe_config] adjusted mode:
>[  175.011006] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011007] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  175.011007] [drm:intel_dump_pipe_config] port clock: 0
>[  175.011008] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  175.011008] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  175.011009] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  175.011009] [drm:intel_dump_pipe_config] ips: 0
>[  175.011009] [drm:intel_dump_pipe_config] double wide: 0
>[  175.011010] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  175.011010] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[  175.011011] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  175.011011] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C
>[  175.011012] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[  175.011012] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  175.011013] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011013] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011013] [drm:intel_dump_pipe_config] requested mode:
>[  175.011014] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011015] [drm:intel_dump_pipe_config] adjusted mode:
>[  175.011015] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011016] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  175.011016] [drm:intel_dump_pipe_config] port clock: 0
>[  175.011017] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  175.011017] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  175.011018] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  175.011018] [drm:intel_dump_pipe_config] ips: 0
>[  175.011018] [drm:intel_dump_pipe_config] double wide: 0
>[  175.011022] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  175.011024] [drm:intel_display_power_put] disabling always-on
>[  175.011025] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  175.011026] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  175.011027] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  175.011028] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  175.011029] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  175.011029] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  175.011030] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  175.011030] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  175.011031] [drm:check_crtc_state] [CRTC:7]
>[  175.011031] [drm:check_crtc_state] [CRTC:11]
>[  175.011032] [drm:check_crtc_state] [CRTC:15]
>[  175.011033] [drm:check_shared_dpll_state] WRPLL 1
>[  175.011034] [drm:check_shared_dpll_state] WRPLL 2
>[  175.277929] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  175.277936] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  175.277937] usb 1-4: hub failed to enable device, error -22
>[  175.290992] ata3: SATA link down (SStatus 0 SControl 300)
>[  175.291005] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  175.291028] ata4: SATA link down (SStatus 0 SControl 300)
>[  175.291038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  175.292227] ata1.00: configured for UDMA/133
>[  175.295213] ata2.00: configured for UDMA/133
>[  175.437788] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  175.437857] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  175.437859] usb 1-4: hub failed to enable device, error -22
>[  175.597936] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  175.611448] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f00
>[  175.611450] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f48
>[  175.611452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f90
>[  175.771534] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  175.771543] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  175.771545] usb 1-6: hub failed to enable device, error -22
>[  175.931496] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  175.931559] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  175.931566] usb 1-6: hub failed to enable device, error -22
>[  176.091680] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  176.165027] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802424fc2a0
>[  176.248259] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  176.248272] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[  176.265279] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  176.265443] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  176.265448] usb 1-7: hub failed to enable device, error -22
>[  176.425104] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  176.425173] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  176.425176] usb 1-7: hub failed to enable device, error -22
>[  176.585312] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  176.599427] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6900
>[  176.599431] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6948
>[  176.599433] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6990
>[  176.599435] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55a80
>[  176.599437] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55ac8
>[  176.600679] PM: resume of devices complete after 1642.069 msecs
>[  176.601641] PM: Finishing wakeup.
>[  176.601644] Restarting tasks ... 
>[  176.602537] [drm:drm_mode_setcrtc] [CRTC:7]
>[  176.602546] [drm:drm_mode_setcrtc] [CONNECTOR:18:eDP-1]
>[  176.602550] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[  176.602555] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  176.602558] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  176.602560] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  176.602565] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7]
>[  176.602568] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  176.602572] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  176.602578] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  176.602583] [drm:connected_sink_compute_bpp] [CONNECTOR:18:eDP-1] checking for sink bpp constrains
>[  176.602587] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[  176.602594] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 136620KHz
>[  176.602597] [drm:intel_dp_compute_config] using min 1 lanes per VBT
>[  176.602601] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  176.602606] [drm:intel_dp_compute_config] DP link bw 06 lane count 2 clock 162000 bpp 18
>[  176.602610] [drm:intel_dp_compute_config] DP link bw required 245916 available 259200
>[  176.602616] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[  176.602621] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[  176.602625] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  176.602629] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  176.602634] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  176.602640] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 3979345, gmch_n: 4194304, link_m: 221074, link_n: 262144, tu: 64
>[  176.602644] [drm:intel_dump_pipe_config] requested mode:
>[  176.602651] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x0 0xa
>[  176.602654] [drm:intel_dump_pipe_config] adjusted mode:
>[  176.602661] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x48 0xa
>[  176.602667] [drm:intel_dump_crtc_timings] crtc timings: 136620 1920 1964 1992 2070 1080 1082 1086 1100, type: 0x48 flags: 0xa
>[  176.602671] [drm:intel_dump_pipe_config] port clock: 162000
>[  176.602675] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  176.602679] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  176.602683] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  176.602686] [drm:intel_dump_pipe_config] ips: 1
>[  176.602690] [drm:intel_dump_pipe_config] double wide: 0
>[  176.602698] [drm:intel_display_power_get] enabling always-on
>[  176.602730] [drm:ironlake_update_primary_plane] Writing base 01068000 00000000 0 0 7680
>[  176.602738] [drm:intel_edp_panel_on] Turn eDP power on
>[  176.602742] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  176.602749] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  176.602753] [drm:wait_panel_status] Wait complete
>[  176.602759] [drm:wait_panel_on] Wait for panel power on
>[  176.602766] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  176.605085] done.
>[  176.606653] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  176.607203] pci_bus 0000:01: Allocating resources
>[  176.607225] pci_bus 0000:02: Allocating resources
>[  176.607251] pci_bus 0000:03: Allocating resources
>[  176.607277] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  176.607374] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  176.607955] pci_bus 0000:01: Allocating resources
>[  176.607975] pci_bus 0000:02: Allocating resources
>[  176.607994] pci_bus 0000:03: Allocating resources
>[  176.608008] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  176.608075] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  176.614083] Bluetooth: hci0: read Intel version: 370710010002030d00
>[  176.614239] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
>[  176.717213] r8169 0000:01:00.0 enp1s0: link down
>[  176.717243] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  176.729756] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  176.729976] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  176.741053] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  176.772217] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[  176.815210] [drm:wait_panel_status] Wait complete
>[  176.815218] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  176.815225] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  176.816334] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  176.816786] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  176.817230] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  176.817674] [drm:intel_dp_start_link_train] clock recovery OK
>[  176.818424] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  176.819167] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  176.819909] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  176.820136] [drm:intel_edp_backlight_on] 
>[  176.820137] [drm:intel_panel_enable_backlight] pipe A
>[  176.820141] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  176.821835] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[  176.855186] [drm:intel_update_fbc] disabled per chip default
>[  176.855191] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1]
>[  176.855195] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  176.855196] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  176.855198] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  176.855199] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  176.855201] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  176.855202] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  176.855204] [drm:check_crtc_state] [CRTC:7]
>[  176.855210] [drm:check_crtc_state] [CRTC:11]
>[  176.855212] [drm:check_crtc_state] [CRTC:15]
>[  176.855214] [drm:check_shared_dpll_state] WRPLL 1
>[  176.855215] [drm:check_shared_dpll_state] WRPLL 2
>[  176.855233] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[  176.855235] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  176.855283] [drm:add_framebuffer_internal] [FB:42]
>[  177.539315] cfg80211: Calling CRDA to update world regulatory domain
>[  177.762405] cfg80211: Calling CRDA to update world regulatory domain
>[  177.842229] cfg80211: Calling CRDA to update world regulatory domain
>[  178.066085] [drm:intel_display_power_put] disabling display
>[  178.066092] [drm:hsw_set_power_well] Requesting to disable the power well
>[  179.782238] cfg80211: Calling CRDA to update world regulatory domain
>[  179.823572] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  179.823579] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  179.949895] cfg80211: Calling CRDA to update world regulatory domain
>[  180.116071] cfg80211: Calling CRDA to update world regulatory domain
>[  180.352794] wlp2s0: authenticate with 00:24:6c:a9:2f:31
>[  180.355109] wlp2s0: send auth to 00:24:6c:a9:2f:31 (try 1/3)
>[  180.368327] wlp2s0: authenticated
>[  180.370554] wlp2s0: associate with 00:24:6c:a9:2f:31 (try 1/3)
>[  180.375094] wlp2s0: RX AssocResp from 00:24:6c:a9:2f:31 (capab=0x31 status=0 aid=13)
>[  180.375913] wlp2s0: associated
>[  180.375935] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  180.375962] cfg80211: Calling CRDA to update world regulatory domain

Actions: View

Attachments on bug 84919: 107790 | 107791 | 107792 | 107793

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.