Attachment 107793 Details for Bug 84919 – dmesg output of third resume from standby

dmesg output of third resume from standby

resume3.log (text/plain), 71.40 KB, created by tigrangab on 2014-10-13 20:56:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: tigrangab

Created: 2014-10-13 20:56:10 UTC

Size: 71.40 KB

patch

obsolete

>[  167.666312] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  167.752654] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937
>[  167.752659] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  167.756213] [drm:intel_edp_backlight_off] 
>[  167.767866] wlp2s0: deauthenticating from 00:24:6c:a9:2f:39 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  167.774132] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  167.775353] cfg80211: Calling CRDA to update world regulatory domain
>[  167.796249] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  167.959724] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  167.973074] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  167.973082] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  167.973257] [drm:intel_edp_panel_off] Turn eDP power off
>[  167.973261] [drm:wait_panel_off] Wait for panel power off time
>[  167.973264] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  168.026350] [drm:wait_panel_status] Wait complete
>[  168.026359] [drm:intel_update_fbc] no output, disabling
>[  168.026362] [drm:intel_display_power_put] disabling always-on
>[  168.026366] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  168.026368] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  168.026370] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  168.026372] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  168.026373] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  168.026374] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  168.026376] [drm:check_crtc_state] [CRTC:7]
>[  168.026378] [drm:check_crtc_state] [CRTC:11]
>[  168.026379] [drm:check_crtc_state] [CRTC:15]
>[  168.026381] [drm:check_shared_dpll_state] WRPLL 1
>[  168.026383] [drm:check_shared_dpll_state] WRPLL 2
>[  168.026399] [drm:drm_mode_setcrtc] [CRTC:7]
>[  168.026401] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[  168.026404] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  168.026406] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [NOCRTC]
>[  168.026407] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  168.026408] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  168.026410] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[  168.026412] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  168.026417] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  168.026419] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  168.026421] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  168.026422] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  168.026423] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  168.026425] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  168.026426] [drm:check_crtc_state] [CRTC:7]
>[  168.026427] [drm:check_crtc_state] [CRTC:11]
>[  168.026429] [drm:check_crtc_state] [CRTC:15]
>[  168.026430] [drm:check_shared_dpll_state] WRPLL 1
>[  168.026431] [drm:check_shared_dpll_state] WRPLL 2
>[  168.026435] [drm:intel_crtc_cursor_set_obj] cursor off
>[  168.883561] [drm:intel_display_power_get] enabling display
>[  168.883574] [drm:hsw_set_power_well] Enabling power well
>[  169.199563] PM: Syncing filesystems ... 
>[  169.207092] ata1.00: exception Emask 0x10 SAct 0x3ff0000 SErr 0x50000 action 0xe frozen
>[  169.207095] ata1.00: irq_stat 0x00400000, PHY RDY changed
>[  169.207106] ata1: SError: { PHYRdyChg CommWake }
>[  169.207108] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207111] ata1.00: cmd 61/08:80:00:18:9b/00:00:04:00:00/40 tag 16 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207112] ata1.00: status: { DRDY }
>[  169.207113] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207115] ata1.00: cmd 61/08:88:08:18:b8/00:00:00:00:00/40 tag 17 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207117] ata1.00: status: { DRDY }
>[  169.207118] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207120] ata1.00: cmd 61/08:90:28:18:b8/00:00:00:00:00/40 tag 18 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207121] ata1.00: status: { DRDY }
>[  169.207122] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207124] ata1.00: cmd 61/08:98:38:18:b8/00:00:00:00:00/40 tag 19 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207125] ata1.00: status: { DRDY }
>[  169.207125] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207127] ata1.00: cmd 61/10:a0:50:18:b8/00:00:00:00:00/40 tag 20 ncq 8192 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207129] ata1.00: status: { DRDY }
>[  169.207129] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207131] ata1.00: cmd 61/08:a8:80:18:b8/00:00:00:00:00/40 tag 21 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207132] ata1.00: status: { DRDY }
>[  169.207133] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207135] ata1.00: cmd 61/10:b0:98:18:b8/00:00:00:00:00/40 tag 22 ncq 8192 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207136] ata1.00: status: { DRDY }
>[  169.207137] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207139] ata1.00: cmd 61/18:b8:b0:18:b8/00:00:00:00:00/40 tag 23 ncq 12288 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207141] ata1.00: status: { DRDY }
>[  169.207141] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207143] ata1.00: cmd 61/08:c0:d8:18:b8/00:00:00:00:00/40 tag 24 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207144] ata1.00: status: { DRDY }
>[  169.207145] ata1.00: failed command: WRITE FPDMA QUEUED
>[  169.207147] ata1.00: cmd 61/20:c8:f0:18:b8/00:00:00:00:00/40 tag 25 ncq 16384 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  169.207148] ata1.00: status: { DRDY }
>[  169.207151] ata1: hard resetting link
>[  169.927523] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  170.025692] ata1.00: configured for UDMA/133
>[  170.037611] ata1: EH complete
>[  170.145864] done.
>[  170.145869] PM: Preparing system for mem sleep
>[  170.146087] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  170.147464] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  170.148570] PM: Entering mem sleep
>[  170.148585] Suspending console(s) (use no_console_suspend to debug)
>[  170.148830] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  170.154511] sd 0:0:0:0: [sda] Stopping disk
>[  170.164612] [drm:intel_display_power_get] enabling always-on
>[  170.170995] [drm:intel_display_power_put] disabling always-on
>[  170.177646] [drm:intel_display_power_put] disabling display
>[  170.177649] [drm:hsw_set_power_well] Requesting to disable the power well
>[  170.461204] PM: suspend of devices complete after 312.336 msecs
>[  170.461430] [drm:hsw_enable_pc8] Enabling package C8+
>[  170.501211] PM: late suspend of devices complete after 39.979 msecs
>[  170.501980] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  170.504662] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  170.518127] PM: noirq suspend of devices complete after 16.903 msecs
>[  170.518409] ACPI: Preparing to enter system sleep state S3
>[  170.519685] PM: Saving platform NVS memory
>[  170.519689] Disabling non-boot CPUs ...
>[  170.519706] intel_pstate CPU 1 exiting
>[  170.520920] kvm: disabling virtualization on CPU1
>[  170.621195] smpboot: CPU 1 is now offline
>[  170.621422] intel_pstate CPU 2 exiting
>[  170.622618] kvm: disabling virtualization on CPU2
>[  170.724589] smpboot: CPU 2 is now offline
>[  170.724812] intel_pstate CPU 3 exiting
>[  170.726168] kvm: disabling virtualization on CPU3
>[  170.827999] smpboot: CPU 3 is now offline
>[  170.831867] ACPI: Low-level resume complete
>[  170.831952] PM: Restoring platform NVS memory
>[  170.832373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x18
>[  170.832398] Enabling non-boot CPUs ...
>[  170.832458] x86: Booting SMP configuration:
>[  170.832460] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  170.845018] kvm: enabling virtualization on CPU1
>[  170.847396] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[  170.850223] microcode: CPU1 updated to revision 0x18, date = 2014-05-23
>[  170.850243] CPU1 is up
>[  170.850274] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  170.862699] kvm: enabling virtualization on CPU2
>[  170.864956] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[  170.866425] microcode: CPU2 updated to revision 0x18, date = 2014-05-23
>[  170.866446] CPU2 is up
>[  170.866478] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  170.878799] kvm: enabling virtualization on CPU3
>[  170.881098] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x18
>[  170.881109] CPU3 is up
>[  170.886049] ACPI: Waking up from system sleep state S3
>[  170.887622] acpi LNXPOWER:01: Turning OFF
>[  170.898557] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  170.898572] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  174.952325] PM: noirq resume of devices complete after 4062.328 msecs
>[  174.952407] [drm:hsw_disable_pc8] Disabling package C8+
>[  174.957544] [drm:intel_display_power_get] enabling always-on
>[  174.957546] [drm:intel_display_power_get] enabling display
>[  174.957655] PM: early resume of devices complete after 5.285 msecs
>[  174.958032] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
>[  174.958046] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
>[  174.958531] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
>[  174.964135] rtc_cmos 00:01: System wakeup disabled by ACPI
>[  174.966019] [drm:intel_opregion_setup] graphic opregion physical addr: 0xaafb4018
>[  174.966040] [drm:intel_opregion_setup] Public ACPI methods supported
>[  174.966042] [drm:intel_opregion_setup] SWSCI supported
>[  174.971043] sd 0:0:0:0: [sda] Starting disk
>[  174.984176] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  174.984177] [drm:intel_opregion_setup] ASLE supported
>[  175.004159] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[  175.010834] [drm:init_status_page] bsd ring hws offset: 0x0081b000
>[  175.010863] [drm:init_status_page] blitter ring hws offset: 0x0083c000
>[  175.010883] [drm:init_status_page] video enhancement ring hws offset: 0x0085d000
>[  175.010974] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled
>[  175.010975] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[  175.010976] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled
>[  175.010977] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[  175.010978] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[  175.010979] [drm:intel_modeset_readout_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[  175.010980] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[  175.010981] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
>[  175.010982] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe A
>[  175.010982] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe B
>[  175.010983] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DP MST-32] hw state readout: disabled, pipe C
>[  175.010984] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:eDP-1] hw state readout: disabled
>[  175.010985] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-1] hw state readout: disabled
>[  175.010985] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:DP-1] hw state readout: disabled
>[  175.010986] [drm:intel_modeset_readout_hw_state] [CONNECTOR:33:HDMI-A-2] hw state readout: disabled
>[  175.010988] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  175.010989] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[  175.010989] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  175.010991] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
>[  175.010991] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  175.010992] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  175.010992] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.010993] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.010993] [drm:intel_dump_pipe_config] requested mode:
>[  175.010995] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.010995] [drm:intel_dump_pipe_config] adjusted mode:
>[  175.010996] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.010997] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  175.010997] [drm:intel_dump_pipe_config] port clock: 0
>[  175.010998] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  175.010998] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  175.010999] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  175.010999] [drm:intel_dump_pipe_config] ips: 0
>[  175.011000] [drm:intel_dump_pipe_config] double wide: 0
>[  175.011000] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  175.011001] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[  175.011001] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  175.011002] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B
>[  175.011002] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  175.011003] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  175.011003] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011004] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011004] [drm:intel_dump_pipe_config] requested mode:
>[  175.011005] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011005] [drm:intel_dump_pipe_config] adjusted mode:
>[  175.011006] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011007] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  175.011007] [drm:intel_dump_pipe_config] port clock: 0
>[  175.011008] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  175.011008] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  175.011009] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  175.011009] [drm:intel_dump_pipe_config] ips: 0
>[  175.011009] [drm:intel_dump_pipe_config] double wide: 0
>[  175.011010] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  175.011010] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[  175.011011] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  175.011011] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C
>[  175.011012] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[  175.011012] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  175.011013] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011013] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  175.011013] [drm:intel_dump_pipe_config] requested mode:
>[  175.011014] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011015] [drm:intel_dump_pipe_config] adjusted mode:
>[  175.011015] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  175.011016] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  175.011016] [drm:intel_dump_pipe_config] port clock: 0
>[  175.011017] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  175.011017] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  175.011018] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  175.011018] [drm:intel_dump_pipe_config] ips: 0
>[  175.011018] [drm:intel_dump_pipe_config] double wide: 0
>[  175.011022] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  175.011024] [drm:intel_display_power_put] disabling always-on
>[  175.011025] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  175.011026] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  175.011027] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  175.011028] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  175.011029] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  175.011029] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  175.011030] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  175.011030] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  175.011031] [drm:check_crtc_state] [CRTC:7]
>[  175.011031] [drm:check_crtc_state] [CRTC:11]
>[  175.011032] [drm:check_crtc_state] [CRTC:15]
>[  175.011033] [drm:check_shared_dpll_state] WRPLL 1
>[  175.011034] [drm:check_shared_dpll_state] WRPLL 2
>[  175.277929] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  175.277936] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  175.277937] usb 1-4: hub failed to enable device, error -22
>[  175.290992] ata3: SATA link down (SStatus 0 SControl 300)
>[  175.291005] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  175.291028] ata4: SATA link down (SStatus 0 SControl 300)
>[  175.291038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  175.292227] ata1.00: configured for UDMA/133
>[  175.295213] ata2.00: configured for UDMA/133
>[  175.437788] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  175.437857] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  175.437859] usb 1-4: hub failed to enable device, error -22
>[  175.597936] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  175.611448] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f00
>[  175.611450] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f48
>[  175.611452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f90
>[  175.771534] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  175.771543] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  175.771545] usb 1-6: hub failed to enable device, error -22
>[  175.931496] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  175.931559] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  175.931566] usb 1-6: hub failed to enable device, error -22
>[  176.091680] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  176.165027] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802424fc2a0
>[  176.248259] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  176.248272] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[  176.265279] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  176.265443] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  176.265448] usb 1-7: hub failed to enable device, error -22
>[  176.425104] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  176.425173] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  176.425176] usb 1-7: hub failed to enable device, error -22
>[  176.585312] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  176.599427] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6900
>[  176.599431] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6948
>[  176.599433] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6990
>[  176.599435] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55a80
>[  176.599437] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55ac8
>[  176.600679] PM: resume of devices complete after 1642.069 msecs
>[  176.601641] PM: Finishing wakeup.
>[  176.601644] Restarting tasks ... 
>[  176.602537] [drm:drm_mode_setcrtc] [CRTC:7]
>[  176.602546] [drm:drm_mode_setcrtc] [CONNECTOR:18:eDP-1]
>[  176.602550] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[  176.602555] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  176.602558] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  176.602560] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  176.602565] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7]
>[  176.602568] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  176.602572] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  176.602578] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  176.602583] [drm:connected_sink_compute_bpp] [CONNECTOR:18:eDP-1] checking for sink bpp constrains
>[  176.602587] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[  176.602594] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 136620KHz
>[  176.602597] [drm:intel_dp_compute_config] using min 1 lanes per VBT
>[  176.602601] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  176.602606] [drm:intel_dp_compute_config] DP link bw 06 lane count 2 clock 162000 bpp 18
>[  176.602610] [drm:intel_dp_compute_config] DP link bw required 245916 available 259200
>[  176.602616] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[  176.602621] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[  176.602625] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  176.602629] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  176.602634] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  176.602640] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 3979345, gmch_n: 4194304, link_m: 221074, link_n: 262144, tu: 64
>[  176.602644] [drm:intel_dump_pipe_config] requested mode:
>[  176.602651] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x0 0xa
>[  176.602654] [drm:intel_dump_pipe_config] adjusted mode:
>[  176.602661] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x48 0xa
>[  176.602667] [drm:intel_dump_crtc_timings] crtc timings: 136620 1920 1964 1992 2070 1080 1082 1086 1100, type: 0x48 flags: 0xa
>[  176.602671] [drm:intel_dump_pipe_config] port clock: 162000
>[  176.602675] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  176.602679] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  176.602683] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  176.602686] [drm:intel_dump_pipe_config] ips: 1
>[  176.602690] [drm:intel_dump_pipe_config] double wide: 0
>[  176.602698] [drm:intel_display_power_get] enabling always-on
>[  176.602730] [drm:ironlake_update_primary_plane] Writing base 01068000 00000000 0 0 7680
>[  176.602738] [drm:intel_edp_panel_on] Turn eDP power on
>[  176.602742] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  176.602749] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  176.602753] [drm:wait_panel_status] Wait complete
>[  176.602759] [drm:wait_panel_on] Wait for panel power on
>[  176.602766] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  176.605085] done.
>[  176.606653] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  176.607203] pci_bus 0000:01: Allocating resources
>[  176.607225] pci_bus 0000:02: Allocating resources
>[  176.607251] pci_bus 0000:03: Allocating resources
>[  176.607277] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  176.607374] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  176.607955] pci_bus 0000:01: Allocating resources
>[  176.607975] pci_bus 0000:02: Allocating resources
>[  176.607994] pci_bus 0000:03: Allocating resources
>[  176.608008] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  176.608075] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  176.614083] Bluetooth: hci0: read Intel version: 370710010002030d00
>[  176.614239] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
>[  176.717213] r8169 0000:01:00.0 enp1s0: link down
>[  176.717243] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  176.729756] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  176.729976] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  176.741053] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  176.772217] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[  176.815210] [drm:wait_panel_status] Wait complete
>[  176.815218] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  176.815225] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  176.816334] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  176.816786] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  176.817230] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  176.817674] [drm:intel_dp_start_link_train] clock recovery OK
>[  176.818424] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  176.819167] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  176.819909] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  176.820136] [drm:intel_edp_backlight_on] 
>[  176.820137] [drm:intel_panel_enable_backlight] pipe A
>[  176.820141] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  176.821835] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[  176.855186] [drm:intel_update_fbc] disabled per chip default
>[  176.855191] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1]
>[  176.855195] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  176.855196] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  176.855198] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  176.855199] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  176.855201] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  176.855202] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  176.855204] [drm:check_crtc_state] [CRTC:7]
>[  176.855210] [drm:check_crtc_state] [CRTC:11]
>[  176.855212] [drm:check_crtc_state] [CRTC:15]
>[  176.855214] [drm:check_shared_dpll_state] WRPLL 1
>[  176.855215] [drm:check_shared_dpll_state] WRPLL 2
>[  176.855233] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[  176.855235] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  176.855283] [drm:add_framebuffer_internal] [FB:42]
>[  177.539315] cfg80211: Calling CRDA to update world regulatory domain
>[  177.762405] cfg80211: Calling CRDA to update world regulatory domain
>[  177.842229] cfg80211: Calling CRDA to update world regulatory domain
>[  178.066085] [drm:intel_display_power_put] disabling display
>[  178.066092] [drm:hsw_set_power_well] Requesting to disable the power well
>[  179.782238] cfg80211: Calling CRDA to update world regulatory domain
>[  179.823572] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  179.823579] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  179.949895] cfg80211: Calling CRDA to update world regulatory domain
>[  180.116071] cfg80211: Calling CRDA to update world regulatory domain
>[  180.352794] wlp2s0: authenticate with 00:24:6c:a9:2f:31
>[  180.355109] wlp2s0: send auth to 00:24:6c:a9:2f:31 (try 1/3)
>[  180.368327] wlp2s0: authenticated
>[  180.370554] wlp2s0: associate with 00:24:6c:a9:2f:31 (try 1/3)
>[  180.375094] wlp2s0: RX AssocResp from 00:24:6c:a9:2f:31 (capab=0x31 status=0 aid=13)
>[  180.375913] wlp2s0: associated
>[  180.375935] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  180.375962] cfg80211: Calling CRDA to update world regulatory domain
>[  213.143365] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  213.197560] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937
>[  213.197565] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  213.209514] [drm:intel_edp_backlight_off] 
>[  213.244985] wlp2s0: deauthenticating from 00:24:6c:a9:2f:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  213.257900] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  213.258437] cfg80211: Calling CRDA for country: US
>[  213.279559] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  213.412977] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  213.426320] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  213.426327] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  213.426499] [drm:intel_edp_panel_off] Turn eDP power off
>[  213.426502] [drm:wait_panel_off] Wait for panel power off time
>[  213.426506] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  213.479642] [drm:wait_panel_status] Wait complete
>[  213.479651] [drm:intel_update_fbc] no output, disabling
>[  213.479653] [drm:intel_display_power_put] disabling always-on
>[  213.479658] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  213.479660] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  213.479661] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  213.479663] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  213.479664] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  213.479666] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  213.479667] [drm:check_crtc_state] [CRTC:7]
>[  213.479669] [drm:check_crtc_state] [CRTC:11]
>[  213.479671] [drm:check_crtc_state] [CRTC:15]
>[  213.479672] [drm:check_shared_dpll_state] WRPLL 1
>[  213.479674] [drm:check_shared_dpll_state] WRPLL 2
>[  213.479690] [drm:drm_mode_setcrtc] [CRTC:7]
>[  213.479692] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[  213.479695] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  213.479696] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [NOCRTC]
>[  213.479698] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  213.479699] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  213.479701] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[  213.479703] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  213.479708] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  213.479709] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  213.479711] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  213.479712] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  213.479714] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  213.479715] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  213.479716] [drm:check_crtc_state] [CRTC:7]
>[  213.479718] [drm:check_crtc_state] [CRTC:11]
>[  213.479719] [drm:check_crtc_state] [CRTC:15]
>[  213.479720] [drm:check_shared_dpll_state] WRPLL 1
>[  213.479722] [drm:check_shared_dpll_state] WRPLL 2
>[  213.479725] [drm:intel_crtc_cursor_set_obj] cursor off
>[  214.340193] [drm:intel_display_power_get] enabling display
>[  214.340197] [drm:hsw_set_power_well] Enabling power well
>[  214.622981] PM: Syncing filesystems ... 
>[  214.630418] ata1.00: exception Emask 0x10 SAct 0xc0000 SErr 0x50000 action 0xe frozen
>[  214.630421] ata1.00: irq_stat 0x00400000, PHY RDY changed
>[  214.630423] ata1: SError: { PHYRdyChg CommWake }
>[  214.630425] ata1.00: failed command: WRITE FPDMA QUEUED
>[  214.630428] ata1.00: cmd 61/08:90:30:80:a5/00:00:26:00:00/40 tag 18 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  214.630429] ata1.00: status: { DRDY }
>[  214.630430] ata1.00: failed command: WRITE FPDMA QUEUED
>[  214.630432] ata1.00: cmd 61/08:98:68:80:a5/00:00:26:00:00/40 tag 19 ncq 4096 out
>         res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
>[  214.630434] ata1.00: status: { DRDY }
>[  214.630436] ata1: hard resetting link
>[  215.350797] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  215.449147] ata1.00: configured for UDMA/133
>[  215.460872] ata1: EH complete
>[  215.587662] done.
>[  215.587666] PM: Preparing system for mem sleep
>[  215.587914] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  215.589327] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  215.590416] PM: Entering mem sleep
>[  215.590433] Suspending console(s) (use no_console_suspend to debug)
>[  215.590689] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  215.596331] sd 0:0:0:0: [sda] Stopping disk
>[  215.604848] [drm:intel_display_power_get] enabling always-on
>[  215.610918] [drm:intel_display_power_put] disabling always-on
>[  215.617590] [drm:intel_display_power_put] disabling display
>[  215.617592] [drm:hsw_set_power_well] Requesting to disable the power well
>[  215.907762] PM: suspend of devices complete after 317.048 msecs
>[  215.907993] [drm:hsw_enable_pc8] Enabling package C8+
>[  215.947835] PM: late suspend of devices complete after 40.045 msecs
>[  215.948382] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  215.948450] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  215.961404] PM: noirq suspend of devices complete after 13.559 msecs
>[  215.961685] ACPI: Preparing to enter system sleep state S3
>[  215.962911] PM: Saving platform NVS memory
>[  215.962915] Disabling non-boot CPUs ...
>[  215.962941] intel_pstate CPU 1 exiting
>[  215.964124] kvm: disabling virtualization on CPU1
>[  216.064484] smpboot: CPU 1 is now offline
>[  216.064712] intel_pstate CPU 2 exiting
>[  216.065872] kvm: disabling virtualization on CPU2
>[  216.167875] smpboot: CPU 2 is now offline
>[  216.168082] intel_pstate CPU 3 exiting
>[  216.169211] kvm: disabling virtualization on CPU3
>[  216.169215] smpboot: CPU 3 is now offline
>[  216.171852] ACPI: Low-level resume complete
>[  216.171937] PM: Restoring platform NVS memory
>[  216.172359] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x18
>[  216.172385] Enabling non-boot CPUs ...
>[  216.172446] x86: Booting SMP configuration:
>[  216.172448] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  216.185020] kvm: enabling virtualization on CPU1
>[  216.187388] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[  216.190390] microcode: CPU1 updated to revision 0x18, date = 2014-05-23
>[  216.190413] CPU1 is up
>[  216.190442] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  216.202852] kvm: enabling virtualization on CPU2
>[  216.205123] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[  216.206583] microcode: CPU2 updated to revision 0x18, date = 2014-05-23
>[  216.206593] CPU2 is up
>[  216.206625] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  216.218899] kvm: enabling virtualization on CPU3
>[  216.221205] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x18
>[  216.221212] CPU3 is up
>[  216.225707] ACPI: Waking up from system sleep state S3
>[  216.227198] acpi LNXPOWER:01: Turning OFF
>[  216.471576] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  216.484345] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  216.484583] PM: noirq resume of devices complete after 257.208 msecs
>[  216.484662] [drm:hsw_disable_pc8] Disabling package C8+
>[  216.484788] [drm:intel_display_power_get] enabling always-on
>[  216.484790] [drm:intel_display_power_get] enabling display
>[  216.485074] PM: early resume of devices complete after 0.456 msecs
>[  216.485450] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
>[  216.487658] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
>[  216.487971] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
>[  216.490876] [drm:intel_opregion_setup] graphic opregion physical addr: 0xaafb4018
>[  216.490898] [drm:intel_opregion_setup] Public ACPI methods supported
>[  216.490899] [drm:intel_opregion_setup] SWSCI supported
>[  216.492233] rtc_cmos 00:01: System wakeup disabled by ACPI
>[  216.501020] sd 0:0:0:0: [sda] Starting disk
>[  216.507624] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  216.507625] [drm:intel_opregion_setup] ASLE supported
>[  216.527656] [drm:init_status_page] render ring hws offset: 0x7fff0000
>[  216.534333] [drm:init_status_page] bsd ring hws offset: 0x0081b000
>[  216.534353] [drm:init_status_page] blitter ring hws offset: 0x0083c000
>[  216.534369] [drm:init_status_page] video enhancement ring hws offset: 0x0085d000
>[  216.534503] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled
>[  216.534505] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[  216.534506] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled
>[  216.534508] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[  216.534509] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[  216.534511] [drm:intel_modeset_readout_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[  216.534513] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[  216.534514] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
>[  216.534515] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe A
>[  216.534516] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe B
>[  216.534517] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DP MST-32] hw state readout: disabled, pipe C
>[  216.534519] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:eDP-1] hw state readout: disabled
>[  216.534521] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-1] hw state readout: disabled
>[  216.534522] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:DP-1] hw state readout: disabled
>[  216.534524] [drm:intel_modeset_readout_hw_state] [CONNECTOR:33:HDMI-A-2] hw state readout: disabled
>[  216.534526] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  216.534527] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[  216.534528] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[  216.534531] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
>[  216.534531] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  216.534532] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  216.534534] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  216.534535] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  216.534536] [drm:intel_dump_pipe_config] requested mode:
>[  216.534538] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  216.534539] [drm:intel_dump_pipe_config] adjusted mode:
>[  216.534541] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  216.534543] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  216.534543] [drm:intel_dump_pipe_config] port clock: 0
>[  216.534544] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  216.534545] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  216.534546] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  216.534547] [drm:intel_dump_pipe_config] ips: 0
>[  216.534548] [drm:intel_dump_pipe_config] double wide: 0
>[  216.534549] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  216.534550] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[  216.534551] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[  216.534552] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B
>[  216.534552] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  216.534553] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  216.534554] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  216.534556] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  216.534556] [drm:intel_dump_pipe_config] requested mode:
>[  216.534558] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  216.534558] [drm:intel_dump_pipe_config] adjusted mode:
>[  216.534560] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  216.534561] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  216.534562] [drm:intel_dump_pipe_config] port clock: 0
>[  216.534563] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  216.534564] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  216.534565] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  216.534565] [drm:intel_dump_pipe_config] ips: 0
>[  216.534566] [drm:intel_dump_pipe_config] double wide: 0
>[  216.534567] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  216.534568] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[  216.534569] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[  216.534570] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C
>[  216.534570] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[  216.534571] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  216.534572] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  216.534573] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  216.534574] [drm:intel_dump_pipe_config] requested mode:
>[  216.534575] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  216.534576] [drm:intel_dump_pipe_config] adjusted mode:
>[  216.534577] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  216.534579] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  216.534579] [drm:intel_dump_pipe_config] port clock: 0
>[  216.534580] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  216.534581] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  216.534582] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  216.534583] [drm:intel_dump_pipe_config] ips: 0
>[  216.534583] [drm:intel_dump_pipe_config] double wide: 0
>[  216.534590] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  216.534592] [drm:intel_display_power_put] disabling always-on
>[  216.534594] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  216.534595] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  216.534598] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  216.534600] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  216.534601] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  216.534602] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  216.534603] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  216.534603] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  216.534604] [drm:check_crtc_state] [CRTC:7]
>[  216.534606] [drm:check_crtc_state] [CRTC:11]
>[  216.534607] [drm:check_crtc_state] [CRTC:15]
>[  216.534609] [drm:check_shared_dpll_state] WRPLL 1
>[  216.534610] [drm:check_shared_dpll_state] WRPLL 2
>[  216.808078] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  216.808085] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  216.808086] usb 1-4: hub failed to enable device, error -22
>[  216.821142] ata3: SATA link down (SStatus 0 SControl 300)
>[  216.824481] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  216.824494] ata4: SATA link down (SStatus 0 SControl 300)
>[  216.824517] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  216.825732] ata1.00: configured for UDMA/133
>[  216.828758] ata2.00: configured for UDMA/133
>[  216.968045] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  216.968068] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>[  216.968069] usb 1-4: hub failed to enable device, error -22
>[  217.128090] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
>[  217.141550] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f00
>[  217.141551] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f48
>[  217.141552] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b7f90
>[  217.301647] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  217.301738] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  217.301753] usb 1-6: hub failed to enable device, error -22
>[  217.461543] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  217.461636] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
>[  217.461651] usb 1-6: hub failed to enable device, error -22
>[  217.621636] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
>[  217.695159] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802424fc2a0
>[  217.795257] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  217.795339] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  217.795353] usb 1-7: hub failed to enable device, error -22
>[  217.955267] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  217.955285] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
>[  217.955286] usb 1-7: hub failed to enable device, error -22
>[  218.115253] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
>[  218.129234] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6900
>[  218.129235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6948
>[  218.129236] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a51b6990
>[  218.129236] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55a80
>[  218.129237] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880242a55ac8
>[  218.129857] PM: resume of devices complete after 1643.830 msecs
>[  218.130469] PM: Finishing wakeup.
>[  218.130470] Restarting tasks ... 
>[  218.132370] [drm:drm_mode_setcrtc] [CRTC:7]
>[  218.132376] [drm:drm_mode_setcrtc] [CONNECTOR:18:eDP-1]
>[  218.132379] [drm:intel_crtc_set_config] [CRTC:7] [FB:38] #connectors=1 (x y) (0 0)
>[  218.132382] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  218.132384] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[  218.132386] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  218.132388] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7]
>[  218.132390] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  218.132392] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  218.132395] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  218.132398] [drm:connected_sink_compute_bpp] [CONNECTOR:18:eDP-1] checking for sink bpp constrains
>[  218.132400] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[  218.132403] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 136620KHz
>[  218.132405] [drm:intel_dp_compute_config] using min 1 lanes per VBT
>[  218.132406] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  218.132410] [drm:intel_dp_compute_config] DP link bw 06 lane count 2 clock 162000 bpp 18
>[  218.132411] [drm:intel_dp_compute_config] DP link bw required 245916 available 259200
>[  218.132414] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[  218.132416] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[  218.132417] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  218.132418] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  218.132420] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  218.132423] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 3979345, gmch_n: 4194304, link_m: 221074, link_n: 262144, tu: 64
>[  218.132424] [drm:intel_dump_pipe_config] requested mode:
>[  218.132427] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x0 0xa
>[  218.132428] [drm:intel_dump_pipe_config] adjusted mode:
>[  218.132431] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 136620 1920 1964 1992 2070 1080 1082 1086 1100 0x48 0xa
>[  218.132434] [drm:intel_dump_crtc_timings] crtc timings: 136620 1920 1964 1992 2070 1080 1082 1086 1100, type: 0x48 flags: 0xa
>[  218.132435] [drm:intel_dump_pipe_config] port clock: 162000
>[  218.132437] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  218.132438] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  218.132440] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  218.132441] [drm:intel_dump_pipe_config] ips: 1
>[  218.132443] [drm:intel_dump_pipe_config] double wide: 0
>[  218.132447] [drm:intel_display_power_get] enabling always-on
>[  218.132464] [drm:ironlake_update_primary_plane] Writing base 019D2000 00000000 0 0 7680
>[  218.132468] [drm:intel_edp_panel_on] Turn eDP power on
>[  218.132470] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  218.132474] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  218.132476] [drm:wait_panel_status] Wait complete
>[  218.132480] [drm:wait_panel_on] Wait for panel power on
>[  218.132484] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  218.132649] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  218.132986] pci_bus 0000:01: Allocating resources
>[  218.133001] pci_bus 0000:02: Allocating resources
>[  218.133015] pci_bus 0000:03: Allocating resources
>[  218.133027] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  218.133074] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  218.133408] pci_bus 0000:01: Allocating resources
>[  218.133421] pci_bus 0000:02: Allocating resources
>[  218.133435] pci_bus 0000:03: Allocating resources
>[  218.133446] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[  218.133489] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
>[  218.135212] done.
>[  218.143311] Bluetooth: hci0: read Intel version: 370710010002030d00
>[  218.143316] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
>[  218.257393] r8169 0000:01:00.0 enp1s0: link down
>[  218.257471] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[  218.275325] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  218.275778] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  218.275993] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  218.287124] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  218.288852] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[  218.299448] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[  218.345343] [drm:wait_panel_status] Wait complete
>[  218.345350] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  218.345356] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  218.346451] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  218.346901] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  218.347340] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  218.347780] [drm:intel_dp_start_link_train] clock recovery OK
>[  218.348528] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  218.349278] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  218.350021] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  218.350248] [drm:intel_edp_backlight_on] 
>[  218.350250] [drm:intel_panel_enable_backlight] pipe A
>[  218.350254] [drm:intel_panel_actually_set_backlight] set backlight PWM = 18
>[  218.351994] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[  218.385420] [drm:intel_update_fbc] disabled per chip default
>[  218.385430] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1]
>[  218.385433] [drm:check_encoder_state] [ENCODER:17:TMDS-17]
>[  218.385435] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  218.385436] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[  218.385437] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[  218.385438] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[  218.385439] [drm:check_encoder_state] [ENCODER:32:DP MST-32]
>[  218.385440] [drm:check_crtc_state] [CRTC:7]
>[  218.385446] [drm:check_crtc_state] [CRTC:11]
>[  218.385448] [drm:check_crtc_state] [CRTC:15]
>[  218.385449] [drm:check_shared_dpll_state] WRPLL 1
>[  218.385451] [drm:check_shared_dpll_state] WRPLL 2
>[  218.385473] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[  218.385474] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  218.385527] [drm:add_framebuffer_internal] [FB:43]
>[  219.059226] ------------[ cut here ]------------
>[  219.059242] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  219.059243] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  219.059279]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  219.059298] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  219.059299] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  219.059303] Workqueue: events reg_todo [cfg80211]
>[  219.059304]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  219.059306]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88023a9cc800
>[  219.059307]  ffff88023a974260 ffff88023a9cc81c 0000000000000000 ffff88024f258000
>[  219.059309] Call Trace:
>[  219.059313]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  219.059316]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  219.059318]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  219.059321]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  219.059324]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  219.059328]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  219.059329]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  219.059331]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  219.059333]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  219.059336]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  219.059337]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  219.059339]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  219.059340] ---[ end trace d124c33bf30aae8f ]---
>[  219.059342] cfg80211: Calling CRDA for country: US
>[  219.282233] ------------[ cut here ]------------
>[  219.282270] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  219.282273] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  219.282335]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  219.282382] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  219.282384] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  219.282394] Workqueue: events reg_todo [cfg80211]
>[  219.282397]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  219.282402]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88023a9cc800
>[  219.282406]  ffff88023a974260 ffff88023a9cc81c 0000000000000000 ffff88024f258000
>[  219.282410] Call Trace:
>[  219.282422]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  219.282428]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  219.282432]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  219.282441]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  219.282450]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  219.282458]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  219.282462]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  219.282467]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  219.282472]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  219.282478]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  219.282483]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  219.282487]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  219.282490] ---[ end trace d124c33bf30aae90 ]---
>[  219.282493] cfg80211: Calling CRDA for country: US
>[  219.362192] ------------[ cut here ]------------
>[  219.362215] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  219.362217] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  219.362259]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  219.362289] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  219.362291] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  219.362297] Workqueue: events reg_todo [cfg80211]
>[  219.362299]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  219.362301]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88023a9cc800
>[  219.362304]  ffff88023a974260 ffff88023a9cc81c 0000000000000000 ffff88024f258000
>[  219.362307] Call Trace:
>[  219.362314]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  219.362318]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  219.362321]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  219.362327]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  219.362333]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  219.362337]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  219.362340]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  219.362343]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  219.362347]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  219.362350]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  219.362354]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  219.362357]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  219.362359] ---[ end trace d124c33bf30aae91 ]---
>[  219.362361] cfg80211: Calling CRDA for country: US
>[  221.301726] ------------[ cut here ]------------
>[  221.301743] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  221.301744] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  221.301770]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  221.301790] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  221.301791] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  221.301795] Workqueue: events reg_todo [cfg80211]
>[  221.301796]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  221.301798]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88023a9cc800
>[  221.301799]  ffff88023a974260 ffff88023a9cc81c 0000000000000000 ffff88024f258000
>[  221.301801] Call Trace:
>[  221.301806]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  221.301809]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  221.301811]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  221.301814]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  221.301818]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  221.301820]  [<ffffffff8127ec79>] ? ioc_release_fn+0x89/0xc0
>[  221.301823]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  221.301824]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  221.301826]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  221.301828]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  221.301830]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  221.301832]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  221.301834]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  221.301835] ---[ end trace d124c33bf30aae92 ]---
>[  221.301836] cfg80211: Calling CRDA for country: US
>[  221.357126] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  221.357133] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  221.469902] ------------[ cut here ]------------
>[  221.469919] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  221.469920] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  221.469946]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  221.469966] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  221.469967] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  221.469971] Workqueue: events reg_todo [cfg80211]
>[  221.469972]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  221.469973]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88023a9cc800
>[  221.469975]  ffff88023a974260 ffff88023a9cc81c 0000000000000000 ffff88024f258000
>[  221.469977] Call Trace:
>[  221.469981]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  221.469985]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  221.469986]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  221.469989]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  221.469993]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  221.469996]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  221.469998]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  221.470000]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  221.470002]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  221.470004]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  221.470006]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  221.470008]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  221.470009] ---[ end trace d124c33bf30aae93 ]---
>[  221.470010] cfg80211: Calling CRDA for country: US
>[  221.636022] ------------[ cut here ]------------
>[  221.636040] WARNING: CPU: 1 PID: 358 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
>[  221.636041] Modules linked in: ctr ccm fuse ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core btusb v4l2_common bluetooth videodev media rtsx_usb_ms memstick snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic joydev mousedev snd_hda_intel snd_hda_controller snd_hda_codec arc4 snd_hwdep thinkpad_acpi nvram ppdev iwlmvm mac80211 iwlwifi iTCO_wdt snd_pcm iTCO_vendor_support mei_me mei evdev mac_hid pcspkr serio_raw cfg80211 r8169 i915 mii drm_kms_helper coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode psmouse snd_timer parport_pc ideapad_laptop sparse_keymap rfkill 8250_dw battery gpio_lynxpoint dw_dmac drm
>[  221.636066]  intel_gtt snd parport i2c_algo_bit dw_dmac_core shpchp video lpc_ich soundcore i2c_i801 i2c_hid hid i2c_designware_platform i2c_designware_core i2c_core spi_pxa2xx_platform button processor ac wmi ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common rtsx_usb_sdmmc rtsx_usb atkbd libps2 ahci libahci libata ehci_pci scsi_mod xhci_hcd ehci_hcd usbcore usb_common i8042 serio sdhci_acpi sdhci led_class mmc_core
>[  221.636086] CPU: 1 PID: 358 Comm: kworker/1:3 Tainted: G        W      3.17.0-1-mainline #1
>[  221.636087] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
>[  221.636091] Workqueue: events reg_todo [cfg80211]
>[  221.636092]  0000000000000000 00000000f10adcba ffff88023abc7d58 ffffffff815346e0
>[  221.636094]  0000000000000000 ffff88023abc7d90 ffffffff8106e54d ffff88023a9cc800
>[  221.636095]  ffff88023a974260 ffff88023a9cc81c 0000000000000000 ffff88024f258000
>[  221.636097] Call Trace:
>[  221.636102]  [<ffffffff815346e0>] dump_stack+0x4d/0x6f
>[  221.636105]  [<ffffffff8106e54d>] warn_slowpath_common+0x7d/0xa0
>[  221.636106]  [<ffffffff8106e67a>] warn_slowpath_null+0x1a/0x20
>[  221.636109]  [<ffffffffa05cf3b1>] reg_process_hint+0x2d1/0x460 [cfg80211]
>[  221.636113]  [<ffffffffa05cf5b9>] reg_todo+0x79/0x1a0 [cfg80211]
>[  221.636116]  [<ffffffff81086b85>] process_one_work+0x145/0x400
>[  221.636117]  [<ffffffff8108714b>] worker_thread+0x6b/0x4a0
>[  221.636119]  [<ffffffff810870e0>] ? init_pwq.part.22+0x10/0x10
>[  221.636121]  [<ffffffff8108c06a>] kthread+0xea/0x100
>[  221.636123]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  221.636125]  [<ffffffff8153a5fc>] ret_from_fork+0x7c/0xb0
>[  221.636127]  [<ffffffff8108bf80>] ? kthread_create_on_node+0x1b0/0x1b0
>[  221.636128] ---[ end trace d124c33bf30aae94 ]---
>[  221.636130] cfg80211: Calling CRDA for country: US
>[  221.837058] wlp2s0: authenticate with 00:24:6c:a9:2f:39
>[  221.839323] wlp2s0: send auth to 00:24:6c:a9:2f:39 (try 1/3)
>[  221.840258] wlp2s0: authenticated
>[  221.840671] wlp2s0: associate with 00:24:6c:a9:2f:39 (try 1/3)
>[  221.843597] wlp2s0: RX AssocResp from 00:24:6c:a9:2f:39 (capab=0x511 status=0 aid=7)
>[  221.844417] wlp2s0: associated
>[  221.844433] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  221.957638] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 00:24:6c:a9:2f:39
>[  222.174385] [drm:intel_display_power_put] disabling display
>[  222.174389] [drm:hsw_set_power_well] Requesting to disable the power well

Actions: View

Attachments on bug 84919: 107790 | 107791 | 107792 | 107793

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.