Attachment 108558 Details for Bug 85546 – dmesg

dmesg

gem_workarounds.dmesg (text/plain), 78.52 KB, created by Guo Jinxian on 2014-10-28 08:31:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-10-28 08:31:59 UTC

Size: 78.52 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.18.0-rc2_drm-intel-nightly_32cefa_20141028+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #934 SMP Tue Oct 28 11:33:03 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_10_28/drm-intel-nightly/32cefad9992e67b4ee7487adf465bd7e189c9c1c/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_10_28/drm-intel-nightly/32cefad9992e67b4ee7487adf465bd7e189c9c1c/modules_x86_64/lib/modules/3.18.0-rc2_drm-intel-nightly_32cefa_20141028+ acpi_rsdp=0xac7e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac1dbfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ac1dc000-0x00000000ac743fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ac744000-0x00000000ac796fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ac797000-0x00000000ac7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD800000 mask 7FFF800000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x033cf000, 0x033cffff] PGTABLE
>[    0.000000] BRK [0x033d0000, 0x033d0fff] PGTABLE
>[    0.000000] BRK [0x033d1000, 0x033d1fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff]
>[    0.000000]  [mem 0x14ee00000-0x14effffff] page 2M
>[    0.000000] BRK [0x033d2000, 0x033d2fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14edfffff]
>[    0.000000]  [mem 0x14c000000-0x14edfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xac1dbfff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xabffffff] page 2M
>[    0.000000]  [mem 0xac000000-0xac1dbfff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff]
>[    0.000000]  [mem 0xac7e2000-0xac7fefff] page 4k
>[    0.000000] BRK [0x033d3000, 0x033d3fff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000AC7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AC7A9188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000AC7B4000 01ED20 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AC77E000 000040
>[    0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AC781000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AC7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AC7B3000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AF000 00340B (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AE000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AD000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AC7AC000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AC7AB000 00057D (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AA000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7A2000 006F08 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AC7A1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7A0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AC79F000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AC79E000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AC79D000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AC79C000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AC79B000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x14effa000-0x14effdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14effffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xac1dbfff]
>[    0.000000]   node   0: [mem 0xac7e2000-0xac7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14effffff]
>[    0.000000] Initmem setup node 0 [mem 0x00001000-0x14effffff]
>[    0.000000] On node 0 totalpages: 1028502
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10952 pages used for memmap
>[    0.000000]   DMA32 zone: 700921 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5056 pages used for memmap
>[    0.000000]   Normal zone: 323584 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac1dc000-0xac743fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac744000-0xac796fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac797000-0xac7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xadffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xb0000000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014ec00000 s78592 r8192 d32000 u262144
>[    0.000000] pcpu-alloc: s78592 r8192 d32000 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012404
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_10_28/drm-intel-nightly/32cefad9992e67b4ee7487adf465bd7e189c9c1c/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_10_28/drm-intel-nightly/32cefad9992e67b4ee7487adf465bd7e189c9c1c/modules_x86_64/lib/modules/3.18.0-rc2_drm-intel-nightly_32cefa_20141028+ acpi_rsdp=0xac7e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3944564K/4114008K available (7778K kernel code, 899K rwdata, 3952K rodata, 23364K init, 624K bss, 169444K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:760 0
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2095.100 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.20 BogoMIPS (lpj=2095100)
>[    0.000007] pid_max: default: 32768 minimum: 301
>[    0.000013] ACPI: Core revision 20140926
>[    0.027035] ACPI: All ACPI Tables successfully acquired
>[    0.027063] Security Framework initialized
>[    0.027320] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.028103] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.028448] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.028456] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.028659] CPU: Physical Processor ID: 0
>[    0.028662] CPU: Processor Core ID: 0
>[    0.029758] mce: CPU supports 7 MCE banks
>[    0.029769] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.029777] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.029777] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.030205] Freeing SMP alternatives memory: 32K (ffffffff8332a000 - ffffffff83332000)
>[    0.030862] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.040871] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam: 06, model: 3d, stepping: 04)
>[    0.040881] TSC deadline timer enabled
>[    0.040902] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
>[    0.040926] ... version:                3
>[    0.040928] ... bit width:              48
>[    0.040930] ... generic registers:      4
>[    0.040932] ... value mask:             0000ffffffffffff
>[    0.040934] ... max period:             0000ffffffffffff
>[    0.040936] ... fixed-purpose events:   3
>[    0.040938] ... event mask:             000000070000000f
>[    0.041207] x86: Booting SMP configuration:
>[    0.041210] .... node  #0, CPUs:      #1
>[    0.053466] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.055608]  #2<7>[    0.067875] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.082274]  #3
>[    0.082274] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.084363] x86: Booted up 1 node, 4 CPUs
>[    0.084369] smpboot: Total of 4 processors activated (16760.80 BogoMIPS)
>[    0.087984] devtmpfs: initialized
>[    0.088304] PM: Registering ACPI NVS region [mem 0xac744000-0xac796fff] (339968 bytes)
>[    0.088522] xor: automatically using best checksumming function:
>[    0.097784]    avx       : 20240.000 MB/sec
>[    0.097823] RTC time: 20:08:19, date: 10/28/14
>[    0.097928] NET: Registered protocol family 16
>[    0.106844] cpuidle: using governor ladder
>[    0.112863] cpuidle: using governor menu
>[    0.112971] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.112975] ACPI: bus type PCI registered
>[    0.113016] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.113020] PCI: not using MMCONFIG
>[    0.113022] PCI: Using configuration type 1 for base access
>[    0.132911] raid6: sse2x1    6523 MB/s
>[    0.149934] raid6: sse2x2    7773 MB/s
>[    0.166963] raid6: sse2x4    9371 MB/s
>[    0.183992] raid6: avx2x1   12753 MB/s
>[    0.201021] raid6: avx2x2   14609 MB/s
>[    0.218049] raid6: avx2x4   16953 MB/s
>[    0.218051] raid6: using algorithm avx2x4 (16953 MB/s)
>[    0.218053] raid6: using avx2x2 recovery algorithm
>[    0.218096] ACPI: Added _OSI(Module Device)
>[    0.218099] ACPI: Added _OSI(Processor Device)
>[    0.218101] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.218103] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.229773] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.267283] ACPI: Dynamic OEM Table Load:
>[    0.267300] ACPI: SSDT 0xFFFF8801497FD800 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.273436] ACPI: Dynamic OEM Table Load:
>[    0.273452] ACPI: SSDT 0xFFFF8801497FF800 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.279306] ACPI: Dynamic OEM Table Load:
>[    0.279320] ACPI: SSDT 0xFFFF8801497C2E00 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.288346] ACPI: Interpreter enabled
>[    0.288355] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
>[    0.288364] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
>[    0.288386] ACPI: (supports S0 S3 S4 S5)
>[    0.288388] ACPI: Using IOAPIC for interrupt routing
>[    0.288411] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.290479] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.290708] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.291165] ACPI: Power Resource [PG00] (on)
>[    0.299567] ACPI: Power Resource [PG01] (on)
>[    0.307597] ACPI: Power Resource [PG02] (on)
>[    0.341245] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.342519] ACPI: Power Resource [FN00] (off)
>[    0.342597] ACPI: Power Resource [FN01] (off)
>[    0.342670] ACPI: Power Resource [FN02] (off)
>[    0.342743] ACPI: Power Resource [FN03] (on)
>[    0.343106] ACPI: Power Resource [FN04] (off)
>[    0.344121] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.344129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.344933] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.345466] PCI host bridge to bus 0000:00
>[    0.345471] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.345474] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.345477] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.345480] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.345485] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
>[    0.345495] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.345734] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.345747] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
>[    0.345755] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.345760] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.345986] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.345995] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit]
>[    0.346238] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.346256] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit]
>[    0.346317] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.346502] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.346547] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.346565] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit]
>[    0.346630] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.346866] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.346882] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff]
>[    0.346890] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff]
>[    0.346898] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.346960] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.347140] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.347190] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.347512] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.347527] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.347534] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.347541] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.347548] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.347555] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.347563] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff]
>[    0.347600] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.347805] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.347819] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit]
>[    0.347839] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.348064] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.348092] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit]
>[    0.348374] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.350498] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.350551] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.350600] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.350649] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.350697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.350745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.350793] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.350841] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.351359] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.351573] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.351683] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.351686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.351690] vgaarb: loaded
>[    0.351692] vgaarb: bridge control possible 0000:00:02.0
>[    0.351774] SCSI subsystem initialized
>[    0.351824] libata version 3.00 loaded.
>[    0.351865] ACPI: bus type USB registered
>[    0.351893] usbcore: registered new interface driver usbfs
>[    0.351907] usbcore: registered new interface driver hub
>[    0.351929] usbcore: registered new device driver usb
>[    0.351964] pps_core: LinuxPPS API ver. 1 registered
>[    0.351966] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.351975] PTP clock support registered
>[    0.352050] PCI: Using ACPI for IRQ routing
>[    0.357791] PCI: pci_cache_line_size set to 64 bytes
>[    0.357816] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.357818] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.357819] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff]
>[    0.357821] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff]
>[    0.357823] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
>[    0.357942] NetLabel: Initializing
>[    0.357945] NetLabel:  domain hash size = 128
>[    0.357947] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.357959] NetLabel:  unlabeled traffic allowed by default
>[    0.358071] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.358079] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.360111] Switched to clocksource hpet
>[    0.363688] pnp: PnP ACPI init
>[    0.363983] system 00:00: [io  0x06a4] has been reserved
>[    0.363987] system 00:00: [io  0x06a0] has been reserved
>[    0.363991] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.364179] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.364182] system 00:01: [io  0xffff] has been reserved
>[    0.364185] system 00:01: [io  0xffff] has been reserved
>[    0.364188] system 00:01: [io  0xffff] has been reserved
>[    0.364191] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.364194] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.364198] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.364245] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.364283] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.364287] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.364394] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.364469] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.365063] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.365067] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.365070] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.365073] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.365077] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.365080] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.365083] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.365086] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.366169] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.366173] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.366176] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.366180] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.366183] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.366186] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.366189] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.366193] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    0.366196] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.366199] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.366202] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved
>[    0.366205] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved
>[    0.366209] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.366444] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.366448] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.366576] pnp: PnP ACPI: found 9 devices
>[    0.373214] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.373220] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.373222] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.373225] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
>[    0.373255] NET: Registered protocol family 2
>[    0.373443] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.373512] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.373579] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.373600] TCP: reno registered
>[    0.373609] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.373624] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.373677] NET: Registered protocol family 1
>[    0.373739] RPC: Registered named UNIX socket transport module.
>[    0.373742] RPC: Registered udp transport module.
>[    0.373743] RPC: Registered tcp transport module.
>[    0.373745] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.373756] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.373845] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.373848] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.373927] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.373943] PCI: CLS 0 bytes, default 64
>[    0.827646] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.827655] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff]
>[    0.827778] Simple Boot Flag at 0x47 set to 0x80
>[    0.828555] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.828594] audit: initializing netlink subsys (disabled)
>[    0.828606] audit: type=2000 audit(1414526899.788:1): initialized
>[    0.828816] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.830562] VFS: Disk quotas dquot_6.5.2
>[    0.830600] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.831236] NFS: Registering the id_resolver key type
>[    0.831244] Key type id_resolver registered
>[    0.831246] Key type id_legacy registered
>[    0.831253] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.831438] fuse init (API version 7.23)
>[    0.831542] msgmni has been set to 7704
>[    0.831791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.831797] io scheduler noop registered
>[    0.831801] io scheduler deadline registered
>[    0.831839] io scheduler cfq registered (default)
>[    0.831938] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.832887] Monitor-Mwait will be used to enter C-1 state
>[    0.858844] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.858849] ACPI: Thermal Zone [TZ00] (47 C)
>[    0.859530] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.859534] ACPI: Thermal Zone [TZ01] (47 C)
>[    0.859587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.880262] serial 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.880712] Non-volatile memory driver v1.3
>[    0.880721] Linux agpgart interface v0.103
>[    0.882045] brd: module loaded
>[    0.882100] Loading iSCSI transport class v2.0-870.
>[    0.882254] iscsi: registered transport (tcp)
>[    0.882349] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.882372] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.882470] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
>[    0.882517] iscsi: registered transport (qla4xxx)
>[    0.882534] QLogic iSCSI HBA Driver
>[    0.882573] DC390: clustering now enabled by default. If you get problems load
>[    0.882577]        with "disable_clustering=1" and report to maintainers
>[    0.882614] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.882667] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.882685] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.882730] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.882753] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.882753] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.882827] SCSI Media Changer driver v0.25 
>[    0.882865] ahci 0000:00:1f.2: version 3.0
>[    0.883003] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>[    0.893428] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    0.893433] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.893929] scsi host0: ahci
>[    0.894033] scsi host1: ahci
>[    0.894107] scsi host2: ahci
>[    0.894181] scsi host3: ahci
>[    0.894221] ata1: DUMMY
>[    0.894225] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40
>[    0.894228] ata3: DUMMY
>[    0.894229] ata4: DUMMY
>[    0.895224] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10)
>[    0.895315] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.895320] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.895344] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.895347] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.895369] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.895371] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.895521] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.895538] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    1.059908] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.059913] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    1.059916] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.059943] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.059961] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
>[    1.059964] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.059994] usbcore: registered new interface driver catc
>[    1.060006] usbcore: registered new interface driver kaweth
>[    1.060010] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.060021] usbcore: registered new interface driver pegasus
>[    1.060033] usbcore: registered new interface driver rtl8150
>[    1.060048] usbcore: registered new interface driver asix
>[    1.060060] usbcore: registered new interface driver ax88179_178a
>[    1.060073] usbcore: registered new interface driver cdc_ether
>[    1.060084] usbcore: registered new interface driver dm9601
>[    1.060096] usbcore: registered new interface driver gl620a
>[    1.060110] usbcore: registered new interface driver net1080
>[    1.060122] usbcore: registered new interface driver plusb
>[    1.060134] usbcore: registered new interface driver rndis_host
>[    1.060146] usbcore: registered new interface driver cdc_subset
>[    1.060158] usbcore: registered new interface driver zaurus
>[    1.060170] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.060191] usbcore: registered new interface driver cdc_ncm
>[    1.060350] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.060354] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    1.060374] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.060417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.060513] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.060529] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
>[    1.060586] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.060589] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.060593] usb usb1: Product: xHCI Host Controller
>[    1.060595] usb usb1: Manufacturer: Linux 3.18.0-rc2_drm-intel-nightly_32cefa_20141028+ xhci-hcd
>[    1.060599] usb usb1: SerialNumber: 0000:00:14.0
>[    1.060705] hub 1-0:1.0: USB hub found
>[    1.060719] hub 1-0:1.0: 11 ports detected
>[    1.063989] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.064033] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.064065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.064068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.064071] usb usb2: Product: xHCI Host Controller
>[    1.064074] usb usb2: Manufacturer: Linux 3.18.0-rc2_drm-intel-nightly_32cefa_20141028+ xhci-hcd
>[    1.064077] usb usb2: SerialNumber: 0000:00:14.0
>[    1.064175] hub 2-0:1.0: USB hub found
>[    1.064185] hub 2-0:1.0: 4 ports detected
>[    1.065000] usb: failed to peer usb2-port3 and usb1-port3 by location (usb2-port3:none) (usb1-port3:usb2-port2)
>[    1.065004] usb usb2-port3: failed to peer to usb1-port3 (-16)
>[    1.065006] usb: port power management may be unreliable
>[    1.065449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.065454] ehci-pci: EHCI PCI platform driver
>[    1.065493] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.065506] ohci-pci: OHCI PCI platform driver
>[    1.065522] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.065564] usbcore: registered new interface driver usb-storage
>[    1.065603] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.065605] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.066007] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.066080] mousedev: PS/2 mouse device common for all mice
>[    1.066174] rtc_cmos 00:02: RTC can wake from S4
>[    1.066310] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.066341] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.066354] i2c /dev entries driver
>[    1.066382] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.066615] usbcore: registered new interface driver usbhid
>[    1.066617] usbhid: USB HID core driver
>[    1.066688] TCP: cubic registered
>[    1.066692] Initializing XFRM netlink socket
>[    1.066698] NET: Registered protocol family 17
>[    1.066724] Key type dns_resolver registered
>[    1.067136] registered taskstats version 1
>[    1.067633] Btrfs loaded
>[    1.067887]   Magic number: 2:317:145
>[    1.067899] ata_port ata2: hash matches
>[    1.067901]  ata2: hash matches
>[    1.067964] acpi device:16: hash matches
>[    1.068022] PM: Hibernation image not present or could not be loaded.
>[    1.068036] Warning: unable to open an initial console.
>[    1.101572] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.198579] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.198854] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.198857] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.199221] ata2.00: configured for UDMA/133
>[    1.199321] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5
>[    1.199470] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.199475] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.199501] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.199533] sd 1:0:0:0: [sda] Write Protect is off
>[    1.199538] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.199563] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.200998]  sda: sda1 sda2 sda3
>[    1.201220] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.205501] Freeing unused kernel memory: 23364K (ffffffff81c59000 - ffffffff8332a000)
>[    1.236849] dracut: dracut-018-35.git20120510.fc17
>[    1.261361] udevd[1436]: starting version 182
>[    1.276855] [drm] Initialized drm 1.1.0 20060810
>[    1.277798] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.278231] ACPI: Lid Switch [LID0]
>[    1.278309] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.278521] ACPI: Power Button [PWRB]
>[    1.278602] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.278796] ACPI: Sleep Button [SLPB]
>[    1.278870] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.278913] ACPI: Power Button [PWRF]
>[    1.284179] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x08 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.284200] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.284274] [drm] Memory usable by graphics device = 4096M
>[    1.284280] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.284282] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.284284] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.284286] [drm] Replacing VGA console driver
>[    1.285566] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018
>[    1.285579] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.285581] [drm:intel_opregion_setup] SWSCI supported
>[    1.290627] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.290630] [drm:intel_opregion_setup] ASLE supported
>[    1.290733] i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[    1.290745] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.290749] [drm] Driver supports precise vblank timestamp query.
>[    1.290752] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.290755] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.290758] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.290759] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.290761] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.290764] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.290767] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa
>[    1.290769] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.290771] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.290773] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.290775] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.290777] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.290778] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.290781] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.290783] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.290785] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.290786] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.290788] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.290789] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.290855] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.290861] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000
>[    1.290864] [drm:intel_display_power_get] enabling always-on
>[    1.290865] [drm:intel_display_power_get] enabling display
>[    1.290929] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.290931] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.290932] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.290934] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.290936] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.290937] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.290939] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.290940] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.290942] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.290943] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.290944] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.290946] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.290947] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.290949] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.290950] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.290952] [drm:intel_modeset_init] 3 display pipes available.
>[    1.290965] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz
>[    1.290968] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.291278] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.291338] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.291340] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.291343] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.291345] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.291348] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.291462] [drm:edp_panel_vdd_on] Turning eDP VDD on
>[    1.291469] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.291881] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.292186] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.313872] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.313874] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    1.313906] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.313915] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.313948] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.319645] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
>[    1.319647] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
>[    1.319649] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled
>[    1.319651] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[    1.319653] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[    1.319657] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A
>[    1.319659] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A
>[    1.319661] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A
>[    1.319662] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B
>[    1.319664] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C
>[    1.319666] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A
>[    1.319668] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:eDP-1] hw state readout: enabled
>[    1.319670] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled
>[    1.319672] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled
>[    1.319674] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled
>[    1.319678] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[    1.319679] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.319680] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.319682] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.319685] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.319687] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.319688] [drm:intel_dump_pipe_config] requested mode:
>[    1.319691] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.319692] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.319694] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.319696] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.319698] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.319699] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.319701] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.319703] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    1.319704] [drm:intel_dump_pipe_config] ips: 0
>[    1.319705] [drm:intel_dump_pipe_config] double wide: 0
>[    1.319708] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.319711] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.319712] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.319714] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.319716] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
>[    1.319717] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.319719] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.319721] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.319722] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.319724] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.319725] [drm:intel_dump_pipe_config] requested mode:
>[    1.319727] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.319728] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.319731] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.319733] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.319734] [drm:intel_dump_pipe_config] port clock: 0
>[    1.319735] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.319737] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.319738] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.319739] [drm:intel_dump_pipe_config] ips: 0
>[    1.319741] [drm:intel_dump_pipe_config] double wide: 0
>[    1.319742] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.319746] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.319747] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.319749] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.319750] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C
>[    1.319751] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.319753] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.319754] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.319756] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.319758] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.319759] [drm:intel_dump_pipe_config] requested mode:
>[    1.319761] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.319762] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.319764] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.319766] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.319767] [drm:intel_dump_pipe_config] port clock: 0
>[    1.319769] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.319770] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.319772] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.319773] [drm:intel_dump_pipe_config] ips: 0
>[    1.319774] [drm:intel_dump_pipe_config] double wide: 0
>[    1.319779] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1]
>[    1.319782] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    1.319784] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
>[    1.319786] [drm:check_encoder_state] [ENCODER:29:DP MST-29]
>[    1.319787] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[    1.319788] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[    1.319789] [drm:check_encoder_state] [ENCODER:34:TMDS-34]
>[    1.319791] [drm:check_crtc_state] [CRTC:8]
>[    1.319798] [drm:check_crtc_state] [CRTC:12]
>[    1.319800] [drm:check_crtc_state] [CRTC:16]
>[    1.319801] [drm:check_shared_dpll_state] WRPLL 1
>[    1.319803] [drm:check_shared_dpll_state] WRPLL 2
>[    1.319807] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.319809] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.319814] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.319817] [drm:intel_alloc_plane_obj] plane fb obj ffff880002d84000
>[    1.319820] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.319822] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.322726] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.322728] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.322767] [drm:i915_gem_context_init] HW context support initialized
>[    1.322774] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.322847] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.322853] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.322909] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.322960] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.323013] [drm:intel_ring_workarounds_emit] Number of Workarounds emitted: 6
>[    1.323169] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1]
>[    1.323172] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1]
>[    1.323184] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.323188] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes :
>[    1.323191] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.323194] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.323195] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1]
>[    1.323197] [drm:intel_dp_detect] [CONNECTOR:28:DP-1]
>[    1.323202] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected
>[    1.323203] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
>[    1.323205] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    1.323361] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.323363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.323365] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
>[    1.323366] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2]
>[    1.323367] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2]
>[    1.323526] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.323527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.323529] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected
>[    1.323530] [drm:drm_setup_crtcs] 
>[    1.323532] [drm:drm_enable_connectors] connector 19 enabled? yes
>[    1.323533] [drm:drm_enable_connectors] connector 28 enabled? no
>[    1.323535] [drm:drm_enable_connectors] connector 32 enabled? no
>[    1.323536] [drm:drm_enable_connectors] connector 35 enabled? no
>[    1.323538] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.323539] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    1.323541] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1920x1080
>[    1.323543] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.323544] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.323545] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.323547] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8
>[    1.323549] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.323551] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.323557] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.324381] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002b94000
>[    1.324455] fbcon: inteldrmfb (fb0) is primary device
>[    1.324539] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    1.324541] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.324543] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.324545] [drm:drm_mode_debug_printmodeline] Modeline 37:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.324546] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
>[    1.324547] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    1.324550] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.324551] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains
>[    1.324554] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.324560] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.324561] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.324564] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.324565] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[    1.324566] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.324567] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.324569] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.324571] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.324573] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.324574] [drm:intel_dump_pipe_config] requested mode:
>[    1.324577] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.324578] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.324580] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.324583] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.324584] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.324585] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.324587] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.324588] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.324589] [drm:intel_dump_pipe_config] ips: 1
>[    1.324590] [drm:intel_dump_pipe_config] double wide: 0
>[    1.324604] [drm:intel_edp_backlight_off] 
>[    1.331928] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.332010] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.332104] [drm] Initialized i915 1.6.0 20141024 for 0000:00:02.0 on minor 0
>[    1.416692] usb 1-1: new high-speed USB device number 2 using xhci_hcd
>[    1.525742] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.537902] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.537906] [drm:wait_panel_off] Wait for panel power off time
>[    1.537909] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.584991] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
>[    1.584992] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.584994] usb 1-1: Product: USB To LAN Converter
>[    1.584994] usb 1-1: Manufacturer: ADMtek
>[    1.584995] usb 1-1: SerialNumber: 0001
>[    1.585827] pegasus 1-1:1.0: setup Pegasus II specific registers
>[    1.592761] [drm:wait_panel_status] Wait complete
>[    1.592766] [drm:intel_update_fbc] no output, disabling
>[    1.592770] [drm:intel_display_power_put] disabling display
>[    1.592772] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.592787] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.592790] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.686928] pegasus 1-1:1.0: eth1, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:e8:00:05:c8
>[    1.830898] tsc: Refined TSC clocksource calibration: 2095.152 MHz
>[    1.839909] usb 1-5: new low-speed USB device number 3 using xhci_hcd
>[    2.015070] usb 1-5: New USB device found, idVendor=0461, idProduct=0010
>[    2.015071] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    2.015072] usb 1-5: Product: USB Keyboard
>[    2.015150] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.015153] usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.021289] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:0461:0010.0001/input/input6
>[    2.021367] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:14.0-5/input0
>[    2.030796] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:0461:0010.0002/input/input7
>[    2.030870] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:14.0-5/input1
>[    2.139062] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.183079] [drm:wait_panel_status] Wait complete
>[    2.183082] [drm:wait_panel_on] Wait for panel power on
>[    2.183085] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.392187] [drm:wait_panel_status] Wait complete
>[    2.392193] [drm:edp_panel_vdd_on] Turning eDP VDD on
>[    2.392199] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.393264] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.393856] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.394748] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.394982] [drm:intel_edp_backlight_on] 
>[    2.394984] [drm:intel_panel_enable_backlight] pipe A
>[    2.394990] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.394995] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[    2.395001] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[    2.428317] [drm:intel_update_fbc] disabled per chip default
>[    2.428320] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1]
>[    2.428323] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    2.428324] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
>[    2.428325] [drm:check_encoder_state] [ENCODER:29:DP MST-29]
>[    2.428326] [drm:check_encoder_state] [ENCODER:30:DP MST-30]
>[    2.428327] [drm:check_encoder_state] [ENCODER:31:DP MST-31]
>[    2.428327] [drm:check_encoder_state] [ENCODER:34:TMDS-34]
>[    2.428329] [drm:check_crtc_state] [CRTC:8]
>[    2.428335] [drm:check_crtc_state] [CRTC:12]
>[    2.428336] [drm:check_crtc_state] [CRTC:16]
>[    2.428337] [drm:check_shared_dpll_state] WRPLL 1
>[    2.428338] [drm:check_shared_dpll_state] WRPLL 2
>[    2.428350] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    2.428352] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    2.428353] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.428355] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    2.428356] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    2.428357] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.428363] Console: switching to colour frame buffer device 240x67
>[    2.428370] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.428372] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.428373] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.437236] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.437274] i915 0000:00:02.0: registered panic notifier
>[    2.441106] dracut: Starting plymouth daemon
>[    2.447879] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.447882] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.447884] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.461806] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.461809] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.461811] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.528434] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.528481] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.564328] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.564497] ACPI: AC Adapter [ADP1] (on-line)
>[    2.572710] EXT4-fs (sda2): recovery complete
>[    2.572953] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.604084] dracut: Checking ext4: /dev/sda2
>[    2.604362] dracut: issuing e2fsck -a  /dev/sda2
>[    2.606614] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.606683] ACPI: Battery Slot [BAT0] (battery present)
>[    2.606755] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.606818] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.606924] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.606987] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.618739] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.618934] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
>[    2.620178] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.626104] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.631015] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.634019] dracut: /dev/sda2: clean, 1018157/13598720 files, 28797479/54372608 blocks
>[    2.634761] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.636848] iTCO_vendor_support: vendor-support=0
>[    2.637006] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.637045] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.637279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.642015] ppdev: user-space parallel port driver
>[    2.653962] [drm:intel_display_power_get] enabling display
>[    2.653966] [drm:hsw_set_power_well] Enabling power well
>[    2.653999] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X
>[    2.657558] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    2.657561] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.657563] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    2.666614] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.670260] dracut: Mounted root filesystem /dev/sda2
>[    2.682195] device-mapper: uevent: version 1.0.3
>[    2.684703] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
>[    2.748407] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    2.760494] dracut: Switching root
>[    2.788945] random: nonblocking pool is initialized
>[    2.829639] init: ureadahead main process (2801) terminated with status 5
>[    2.832357] Switched to clocksource tsc
>[    3.956232] systemd-udevd[2918]: starting version 204
>[    4.061081] e1000e 0000:00:19.0 eth3: renamed from eth0
>[    4.069326] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    4.069330] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.069332] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    4.125686] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.126599] [drm:i915_gem_open] 
>[    4.126637] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    4.126643] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.126647] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    4.126651] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    4.126654] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    4.126657] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    4.126659] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    4.126662] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    4.126665] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    4.126681] [drm:i915_gem_open] 
>[    4.126736] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    4.126741] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    4.126746] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    4.126750] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1]
>[    4.126752] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1]
>[    4.126767] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    4.126772] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes :
>[    4.126777] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    4.126781] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    4.126786] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[    4.133955] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[    4.133961] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1]
>[    4.133964] [drm:intel_dp_detect] [CONNECTOR:28:DP-1]
>[    4.133973] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected
>[    4.133978] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[    4.133980] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1]
>[    4.133982] [drm:intel_dp_detect] [CONNECTOR:28:DP-1]
>[    4.133987] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected
>[    4.133992] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[    4.133995] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
>[    4.133997] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    4.134650] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    4.134655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.134659] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
>[    4.134666] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[    4.134669] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
>[    4.134671] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    4.135004] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    4.135008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.135011] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
>[    4.135020] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
>[    4.135022] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2]
>[    4.135024] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2]
>[    4.135188] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    4.135191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.135194] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected
>[    4.135199] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
>[    4.135202] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2]
>[    4.135204] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2]
>[    4.135364] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    4.135366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.135369] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected
>[    4.135389] [drm:add_framebuffer_internal] [FB:36]
>[    4.147317] systemd-udevd[3582]: could not open moddep file '/lib/modules/3.18.0-rc2_drm-intel-nightly_32cefa_20141028+/modules.dep.bin'
>[    4.149205] pegasus 1-1:1.0 eth6: renamed from eth1
>[    4.151305] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.210747] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    4.221442] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    4.274231] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.276264] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.287885] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.289556] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.296160] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.296172] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.342719] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.346714] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.450059] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    4.460923] init: idmapd-mounting (/lib/modules/3.17.0_drm-intel-nightly_1361e3_20141018+) main process (3699) killed by TERM signal
>[    4.494475] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
>[    4.538023] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.544266] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.555568] init: failsafe main process (3829) killed by TERM signal
>[    4.615241] init: statd-mounting (/lib/modules/3.17.0_drm-intel-nightly_1361e3_20141018+) main process (3700) killed by TERM signal
>[    4.904583] init: avahi-cups-reload main process (4162) terminated with status 1
>[    4.914651] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    5.015562] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    5.481640] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    5.481646] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    5.481649] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    5.481652] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    5.481654] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    5.481656] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    5.481658] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    5.481660] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    5.481662] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[    5.481691] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[    5.481693] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    5.481694] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[   97.027867] gem_workarounds: executing
>[   97.027962] [drm:i915_gem_open] 
>[   97.028276] [drm:i915_gem_open] 
>[   97.028434] gem_workarounds: starting subtest reset
>[   97.028789] [drm:i915_ring_stop_set] Stopping rings 0x400000ff
>[  104.800212] [drm] stuck on render ring
>[  104.801672] [drm] GPU HANG: ecode 0:0xeed7ef6b, in gem_workarounds [4713], reason: Ring hung, action: reset
>[  104.801673] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  104.801674] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  104.801676] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  104.801677] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  104.801678] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  104.801748] [drm:i915_error_work_func] resetting chip
>[  104.803176] [drm] Simulated gpu hang, resetting stop_rings
>[  104.803180] drm/i915: Resetting chip after gpu hang
>[  104.803187] [drm:init_status_page] render ring hws offset: 0x007fb000
>[  104.803261] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[  104.803282] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[  104.803298] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[  104.803335] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[  104.804533] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[  104.804538] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  104.804540] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  104.804543] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[  104.804545] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[  104.804547] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  104.804549] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[  104.804551] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[  104.804552] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  106.801257] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  111.846724] gem_workarounds: executing
>[  111.846796] [drm:i915_gem_open] 
>[  111.847103] [drm:i915_gem_open] 
>[  111.847253] gem_workarounds: starting subtest suspend-resume
>[  111.847903] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0)
>[  111.847908] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[  111.847910] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  111.847913] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[  111.847915] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[  111.847916] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]
>[  111.847918] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[  111.847920] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[  111.847921] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]

Actions: View

Attachments on bug 85546: 108558

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.