Attachment 108680 Details for Bug 85641 – dmesg

dmesg

rotation_hutplugin.dmesg (text/plain), 118.44 KB, created by Guo Jinxian on 2014-10-30 09:23:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-10-30 09:23:42 UTC

Size: 118.44 KB

patch

obsolete

>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x7bffc000-0x7bffffff]
>[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880078a00000-ffff88007a9fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0008efff]
>[    0.000000]   node   0: [mem 0x00090000-0x0009ffff]
>[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
>[    0.000000]   node   0: [mem 0x20200000-0x7aae1fff]
>[    0.000000]   node   0: [mem 0x7b622000-0x7b626fff]
>[    0.000000]   node   0: [mem 0x7b628000-0x7b62afff]
>[    0.000000]   node   0: [mem 0x7b62c000-0x7bffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7bffffff]
>[    0.000000] On node 0 totalpages: 504412
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 24 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7872 pages used for memmap
>[    0.000000]   DMA32 zone: 500414 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0x7ce00000-0x7edfffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7aae2000-0x7b4e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b4e2000-0x7b5e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b5e2000-0x7b621fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b627000-0x7b627fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b62b000-0x7b62bfff]
>[    0.000000] e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007bc00000 s78592 r8192 d32000 u524288
>[    0.000000] pcpu-alloc: s78592 r8192 d32000 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 496452
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_10_30/drm-intel-nightly/bd21cf795cf5dc278f1451d0f7a597cb1d13c2ba/bzImage_x86_64 root=/dev/sda3 drm.debug=0xe modules_path=kernels//nightly_parents/2014_10_30/drm-intel-nightly/bd21cf795cf5dc278f1451d0f7a597cb1d13c2ba/modules_x86_64/lib/modules/3.18.0-rc2_drm-intel-nightly_bd21cf_20141030+ acpi_rsdp=0x7b621014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 1947500K/2017648K available (7778K kernel code, 899K rwdata, 3952K rodata, 23364K init, 624K bss, 70148K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:4352 nr_irqs:1024 0
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1360.011 MHz processor
>[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2720.02 BogoMIPS (lpj=1360011)
>[    0.000019] pid_max: default: 32768 minimum: 301
>[    0.000042] ACPI: Core revision 20140926
>[    0.023682] ACPI: All ACPI Tables successfully acquired
>[    0.023768] Security Framework initialized
>[    0.024076] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.026079] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.027165] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.027189] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.027807] CPU: Physical Processor ID: 0
>[    0.027819] CPU: Processor Core ID: 0
>[    0.033286] mce: CPU supports 6 MCE banks
>[    0.033302] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.033319] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.033319] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
>[    0.033566] Freeing SMP alternatives memory: 32K (ffffffff8332a000 - ffffffff83332000)
>[    0.035359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.045400] smpboot: CPU0: Genuine Intel(R) CPU         @ 1.36GHz (fam: 06, model: 4c, stepping: 02)
>[    0.045426] TSC deadline timer enabled
>[    0.045470] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.045493] ... version:                3
>[    0.045499] ... bit width:              40
>[    0.045505] ... generic registers:      2
>[    0.045511] ... value mask:             000000ffffffffff
>[    0.045517] ... max period:             000000ffffffffff
>[    0.045523] ... fixed-purpose events:   3
>[    0.045529] ... event mask:             0000000700000003
>[    0.046404] x86: Booting SMP configuration:
>[    0.046415] .... node  #0, CPUs:      #1
>[    0.062928] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.065209]  #2<7>[    0.081730] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.100463]  #3
>[    0.100464] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.102535] x86: Booted up 1 node, 4 CPUs
>[    0.102550] smpboot: Total of 4 processors activated (10880.08 BogoMIPS)
>[    0.103552] devtmpfs: initialized
>[    0.104231] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
>[    0.104243] PM: Registering ACPI NVS region [mem 0x7b4e2000-0x7b5e1fff] (1048576 bytes)
>[    0.104851] xor: measuring software checksum speed
>[    0.114546]    prefetch64-sse:  4784.000 MB/sec
>[    0.124573]    generic_sse:  4256.000 MB/sec
>[    0.124581] xor: using function: prefetch64-sse (4784.000 MB/sec)
>[    0.124637] RTC time:  0:30:09, date: 01/01/01
>[    0.124948] NET: Registered protocol family 16
>[    0.131602] cpuidle: using governor ladder
>[    0.137620] cpuidle: using governor menu
>[    0.137840] ACPI: bus type PCI registered
>[    0.137943] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.137957] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
>[    0.138143] PCI: Using configuration type 1 for base access
>[    0.164761] raid6: sse2x1     562 MB/s
>[    0.181811] raid6: sse2x2     656 MB/s
>[    0.198863] raid6: sse2x4    1093 MB/s
>[    0.198871] raid6: using algorithm sse2x4 (1093 MB/s)
>[    0.198877] raid6: using ssse3x2 recovery algorithm
>[    0.199000] ACPI: Added _OSI(Module Device)
>[    0.199009] ACPI: Added _OSI(Processor Device)
>[    0.199016] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.199023] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.235485] ACPI: Dynamic OEM Table Load:
>[    0.235512] ACPI: SSDT 0xFFFF880077A5C000 000565 (v01 PmRef  Cpu0Ist  00003000 INTL 20120518)
>[    0.236883] ACPI: Dynamic OEM Table Load:
>[    0.236903] ACPI: SSDT 0xFFFF880077A81000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120518)
>[    0.243024] ACPI: Dynamic OEM Table Load:
>[    0.243044] ACPI: SSDT 0xFFFF88007782EA00 00015F (v01 PmRef  ApIst    00003000 INTL 20120518)
>[    0.248671] ACPI: Dynamic OEM Table Load:
>[    0.248689] ACPI: SSDT 0xFFFF880077CE4B40 00008D (v01 PmRef  ApCst    00003000 INTL 20120518)
>[    0.481032] ACPI: Interpreter enabled
>[    0.481052] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
>[    0.481071] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
>[    0.481116] ACPI: (supports S0 S3 S4 S5)
>[    0.481124] ACPI: Using IOAPIC for interrupt routing
>[    0.481212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.499235] ACPI: Power Resource [ID3C] (on)
>[    0.508013] ACPI: Power Resource [USBC] (on)
>[    0.512539] ACPI: Power Resource [FN00] (off)
>[    0.513812] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.513833] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.513942] \_SB_.PCI0:_OSC invalid UUID
>[    0.513947] _OSC request data:1 1f 0 
>[    0.513957] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.514751] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.514838] PCI host bridge to bus 0000:00
>[    0.514850] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.514860] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
>[    0.514870] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
>[    0.514880] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.514890] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.514899] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.514909] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
>[    0.514919] pci_bus 0000:00: root bus resource [mem 0x7ce00001-0x7ed00000]
>[    0.514929] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
>[    0.514952] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
>[    0.515328] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
>[    0.515363] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
>[    0.515381] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    0.515395] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
>[    0.515660] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
>[    0.515685] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff]
>[    0.515997] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
>[    0.516055] pci 0000:00:13.0: reg 0x20: [io  0x1060-0x107f]
>[    0.516070] pci 0000:00:13.0: reg 0x24: [mem 0x91726000-0x917267ff]
>[    0.516144] pci 0000:00:13.0: PME# supported from D3hot
>[    0.516362] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
>[    0.516391] pci 0000:00:14.0: reg 0x10: [mem 0x91700000-0x9170ffff 64bit]
>[    0.516479] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.516601] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.516731] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
>[    0.516756] pci 0000:00:1a.0: reg 0x10: [mem 0x91600000-0x916fffff]
>[    0.516770] pci 0000:00:1a.0: reg 0x14: [mem 0x91500000-0x915fffff]
>[    0.516860] pci 0000:00:1a.0: PME# supported from D0 D3hot
>[    0.517087] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
>[    0.517118] pci 0000:00:1b.0: reg 0x10: [mem 0x91710000-0x91713fff 64bit]
>[    0.517241] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.517388] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.517506] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
>[    0.517652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.517784] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.517901] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
>[    0.518051] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.518196] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.518320] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
>[    0.518641] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
>[    0.518693] pci 0000:00:1f.3: reg 0x10: [mem 0x91718000-0x9171801f]
>[    0.518793] pci 0000:00:1f.3: reg 0x20: [io  0x1040-0x105f]
>[    0.519246] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.519261] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.519271] pci 0000:00:1c.0:   bridge window [mem 0x91800000-0x919fffff]
>[    0.519283] pci 0000:00:1c.0:   bridge window [mem 0x91a00000-0x91bfffff 64bit pref]
>[    0.519814] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
>[    0.519953] pci 0000:02:00.0: reg 0x10: [mem 0x91400000-0x91401fff 64bit]
>[    0.520621] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.520731] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.523744] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.523762] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x914fffff]
>[    0.528751] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.528917] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.529080] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
>[    0.529241] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15), disabled.
>[    0.529404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 10 11 12 14 15), disabled.
>[    0.529576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.529738] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.529901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.533057] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.533180] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    0.533466] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.533477] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.533503] vgaarb: loaded
>[    0.533510] vgaarb: bridge control possible 0000:00:02.0
>[    0.533730] SCSI subsystem initialized
>[    0.533892] libata version 3.00 loaded.
>[    0.534009] ACPI: bus type USB registered
>[    0.534096] usbcore: registered new interface driver usbfs
>[    0.534146] usbcore: registered new interface driver hub
>[    0.534198] usbcore: registered new device driver usb
>[    0.534304] pps_core: LinuxPPS API ver. 1 registered
>[    0.534313] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.534341] PTP clock support registered
>[    0.534559] PCI: Using ACPI for IRQ routing
>[    0.536791] PCI: pci_cache_line_size set to 64 bytes
>[    0.537461] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
>[    0.537467] e820: reserve RAM buffer [mem 0x7aae2000-0x7bffffff]
>[    0.537472] e820: reserve RAM buffer [mem 0x7b627000-0x7bffffff]
>[    0.537476] e820: reserve RAM buffer [mem 0x7b62b000-0x7bffffff]
>[    0.537797] NetLabel: Initializing
>[    0.537805] NetLabel:  domain hash size = 128
>[    0.537811] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.537849] NetLabel:  unlabeled traffic allowed by default
>[    0.538060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.538074] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.540158] Switched to clocksource hpet
>[    0.548363] pnp: PnP ACPI init
>[    0.549048] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.549062] system 00:00: [io  0x0400-0x047f] has been reserved
>[    0.549072] system 00:00: [io  0x0500-0x05fe] has been reserved
>[    0.549087] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.549295] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.549439] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.549572] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.551316] pnp 00:04: unknown resource type 19 in _CRS
>[    0.551327] pnp 00:04: can't evaluate _CRS: 1
>[    0.551404] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.553233] system 00:05: [mem 0x9172b000-0x9172bfff] has been reserved
>[    0.553248] system 00:05: [mem 0x91729000-0x91729fff] has been reserved
>[    0.553259] system 00:05: [mem 0x91727000-0x91727fff] has been reserved
>[    0.553270] system 00:05: [mem 0x91725000-0x91725fff] has been reserved
>[    0.553280] system 00:05: [mem 0x91723000-0x91723fff] has been reserved
>[    0.553291] system 00:05: [mem 0x91721000-0x91721fff] has been reserved
>[    0.553302] system 00:05: [mem 0x9171f000-0x9171ffff] has been reserved
>[    0.553313] system 00:05: [mem 0x9171d000-0x9171dfff] has been reserved
>[    0.553324] system 00:05: [mem 0x9171b000-0x9171bfff] has been reserved
>[    0.553334] system 00:05: [mem 0x91719000-0x91719fff] has been reserved
>[    0.553346] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.553571] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.553585] system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved
>[    0.553596] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
>[    0.553606] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
>[    0.553617] system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved
>[    0.553628] system 00:06: [mem 0xfed08000-0xfed09fff] has been reserved
>[    0.553639] system 00:06: [mem 0xfed80000-0xfedbffff] could not be reserved
>[    0.553650] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    0.553660] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.553673] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.554044] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.555552] pnp: PnP ACPI: found 8 devices
>[    0.566495] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.566518] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.566534] pci 0000:00:1c.0:   bridge window [mem 0x91800000-0x919fffff]
>[    0.566547] pci 0000:00:1c.0:   bridge window [mem 0x91a00000-0x91bfffff 64bit pref]
>[    0.566566] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.566580] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x914fffff]
>[    0.566601] pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
>[    0.566607] pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
>[    0.566612] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
>[    0.566618] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
>[    0.566624] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
>[    0.566629] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
>[    0.566635] pci_bus 0000:00: resource 10 [mem 0x7ce00001-0x7ed00000]
>[    0.566641] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff]
>[    0.566647] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>[    0.566652] pci_bus 0000:01: resource 1 [mem 0x91800000-0x919fffff]
>[    0.566658] pci_bus 0000:01: resource 2 [mem 0x91a00000-0x91bfffff 64bit pref]
>[    0.566664] pci_bus 0000:02: resource 1 [mem 0x91400000-0x914fffff]
>[    0.566747] NET: Registered protocol family 2
>[    0.567260] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.567383] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>[    0.567519] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.567606] TCP: reno registered
>[    0.567626] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.567661] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.567804] NET: Registered protocol family 1
>[    0.568055] RPC: Registered named UNIX socket transport module.
>[    0.568067] RPC: Registered udp transport module.
>[    0.568074] RPC: Registered tcp transport module.
>[    0.568080] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.568117] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.568947] PCI: CLS 0 bytes, default 64
>[    1.609591] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    1.609685] audit: initializing netlink subsys (disabled)
>[    1.609729] audit: type=2000 audit(978309010.567:1): initialized
>[    1.610267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.615372] VFS: Disk quotas dquot_6.5.2
>[    1.615486] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.617398] NFS: Registering the id_resolver key type
>[    1.617439] Key type id_resolver registered
>[    1.617446] Key type id_legacy registered
>[    1.617462] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.617983] fuse init (API version 7.23)
>[    1.618270] msgmni has been set to 3803
>[    1.618931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.618947] io scheduler noop registered
>[    1.618956] io scheduler deadline registered
>[    1.619049] io scheduler cfq registered (default)
>[    1.619713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.637451] Monitor-Mwait will be used to enter C-1 state
>[    1.637490] Monitor-Mwait will be used to enter C-2 state
>[    1.637515] Monitor-Mwait will be used to enter C-3 state
>[    1.637558] ACPI: acpi_idle registered with cpuidle
>[    1.640501] ACPI: Invalid active1 threshold
>[    1.652309] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.652319] ACPI: Thermal Zone [TZ01] (27 C)
>[    1.652470] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.672889] serial 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.674414] Non-volatile memory driver v1.3
>[    1.674435] Linux agpgart interface v0.103
>[    1.678058] brd: module loaded
>[    1.678214] Loading iSCSI transport class v2.0-870.
>[    1.678632] iscsi: registered transport (tcp)
>[    1.678898] Adaptec aacraid driver 1.2-0[30300]-ms
>[    1.678954] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.679165] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
>[    1.679296] iscsi: registered transport (qla4xxx)
>[    1.679347] QLogic iSCSI HBA Driver
>[    1.679443] DC390: clustering now enabled by default. If you get problems load
>[    1.679453]        with "disable_clustering=1" and report to maintainers
>[    1.679533] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.679654] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.679697] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.679805] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.679864] osst :I: Tape driver with OnStream support version 0.99.4
>[    1.679864] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.680045] SCSI Media Changer driver v0.25 
>[    1.680140] ahci 0000:00:13.0: version 3.0
>[    1.680464] ahci 0000:00:13.0: irq 115 for MSI/MSI-X
>[    1.691283] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x2 impl SATA mode
>[    1.691337] ahci 0000:00:13.0: flags: 64bit ncq ilck led clo only pio slum part deso sadm sds apst 
>[    1.692290] scsi host0: ahci
>[    1.692656] scsi host1: ahci
>[    1.692811] ata1: DUMMY
>[    1.692822] ata2: SATA max UDMA/133 abar m2048@0x91726000 port 0x91726180 irq 115
>[    1.695166] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10)
>[    1.695448] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.695458] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.695509] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.695518] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.695568] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.695576] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    1.695627] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
>[    1.695636] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.695721] usbcore: registered new interface driver catc
>[    1.695765] usbcore: registered new interface driver kaweth
>[    1.695777] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.695812] usbcore: registered new interface driver pegasus
>[    1.695849] usbcore: registered new interface driver rtl8150
>[    1.695900] usbcore: registered new interface driver asix
>[    1.695939] usbcore: registered new interface driver ax88179_178a
>[    1.695976] usbcore: registered new interface driver cdc_ether
>[    1.696012] usbcore: registered new interface driver dm9601
>[    1.696048] usbcore: registered new interface driver gl620a
>[    1.696085] usbcore: registered new interface driver net1080
>[    1.696130] usbcore: registered new interface driver plusb
>[    1.696167] usbcore: registered new interface driver rndis_host
>[    1.696232] usbcore: registered new interface driver cdc_subset
>[    1.696272] usbcore: registered new interface driver zaurus
>[    1.696310] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.696379] usbcore: registered new interface driver cdc_ncm
>[    1.696971] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.697110] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.697393] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.697438] xhci_hcd 0000:00:14.0: irq 116 for MSI/MSI-X
>[    1.697595] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.697607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.697620] usb usb1: Product: xHCI Host Controller
>[    1.697629] usb usb1: Manufacturer: Linux 3.18.0-rc2_drm-intel-nightly_bd21cf_20141030+ xhci-hcd
>[    1.697640] usb usb1: SerialNumber: 0000:00:14.0
>[    1.698010] hub 1-0:1.0: USB hub found
>[    1.698051] hub 1-0:1.0: 7 ports detected
>[    1.699420] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.699550] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.699669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.699680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.699691] usb usb2: Product: xHCI Host Controller
>[    1.699700] usb usb2: Manufacturer: Linux 3.18.0-rc2_drm-intel-nightly_bd21cf_20141030+ xhci-hcd
>[    1.699710] usb usb2: SerialNumber: 0000:00:14.0
>[    1.700025] hub 2-0:1.0: USB hub found
>[    1.700058] hub 2-0:1.0: 6 ports detected
>[    1.700730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.700744] ehci-pci: EHCI PCI platform driver
>[    1.700847] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.700867] ohci-pci: OHCI PCI platform driver
>[    1.700920] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.701059] usbcore: registered new interface driver usb-storage
>[    1.701170] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.701538] i8042: Warning: Keylock active
>[    1.702552] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.702575] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.702861] mousedev: PS/2 mouse device common for all mice
>[    1.703164] rtc_cmos 00:07: RTC can wake from S4
>[    1.703438] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>[    1.703505] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.703540] i2c /dev entries driver
>[    1.703617] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.704321] usbcore: registered new interface driver usbhid
>[    1.704330] usbhid: USB HID core driver
>[    1.704481] TCP: cubic registered
>[    1.704492] Initializing XFRM netlink socket
>[    1.704510] NET: Registered protocol family 17
>[    1.704587] Key type dns_resolver registered
>[    1.705779] registered taskstats version 1
>[    1.707062] Btrfs loaded
>[    1.707971]   Magic number: 1:515:505
>[    1.708008] i8042 i8042: hash matches
>[    1.708031] iscsi_transport qla4xxx: hash matches
>[    1.708398] PM: Hibernation image not present or could not be loaded.
>[    1.708456] Warning: unable to open an initial console.
>[    1.922367] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[    2.000316] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.001099] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    2.001114] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    2.003017] ata2.00: configured for UDMA/133
>[    2.003481] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5
>[    2.004340] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    2.004346] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    2.004353] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    2.004946] sd 1:0:0:0: [sda] Write Protect is off
>[    2.004962] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.005159] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.006571]  sda: sda1 sda2 sda3
>[    2.007692] sd 1:0:0:0: [sda] Attached SCSI disk
>[    2.036259] Freeing unused kernel memory: 23364K (ffffffff81c59000 - ffffffff8332a000)
>[    2.052297] usb 1-3: new high-speed USB device number 2 using xhci_hcd
>[    2.144441] dracut: dracut-018-35.git20120510.fc17
>[    2.178271] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[    2.178459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.222757] usb 1-3: New USB device found, idVendor=12d1, idProduct=1573
>[    2.222778] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[    2.222788] usb 1-3: Product: HUAWEI Mobile
>[    2.222796] usb 1-3: Manufacturer: HUAWEI Technology
>[    2.222804] usb 1-3: SerialNumber: 0123456789ABCDEF
>[    2.243332] udevd[1245]: starting version 182
>[    2.278375] usbcore: registered new interface driver usbserial
>[    2.278438] usbcore: registered new interface driver usbserial_generic
>[    2.278493] usbserial: USB Serial support registered for generic
>[    2.280780] usbcore: registered new interface driver option
>[    2.280839] usbserial: USB Serial support registered for GSM modem (1-port)
>[    2.280921] option 1-3:1.0: GSM modem (1-port) converter detected
>[    2.282349] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
>[    2.282403] option 1-3:1.1: GSM modem (1-port) converter detected
>[    2.283199] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
>[    2.283276] option 1-3:1.2: GSM modem (1-port) converter detected
>[    2.284016] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
>[    2.284117] option 1-3:1.5: GSM modem (1-port) converter detected
>[    2.284547] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB3
>[    2.295853] [drm] Initialized drm 1.1.0 20060810
>[    2.297961] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>[    2.299451] ACPI: Lid Switch [LID0]
>[    2.299645] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    2.300179] ACPI: Power Button [PWRB]
>[    2.300379] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
>[    2.302721] ACPI: Sleep Button [SLPB]
>[    2.302941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    2.303633] ACPI: Power Button [PWRF]
>[    2.313143] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x22b0 rev=0x15 flags=need_gfx_hws,is_valleyview,is_preliminary,has_hotplug,
>[    2.313191] [drm:intel_detect_pch] No PCH found.
>[    2.313499] [drm] Memory usable by graphics device = 2048M
>[    2.313515] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    2.313519] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    2.313523] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    2.313526] [drm] Replacing VGA console driver
>[    2.317805] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7b56d018
>[    2.317838] [drm:intel_opregion_setup] Public ACPI methods supported
>[    2.317842] [drm:intel_opregion_setup] ASLE supported
>[    2.318027] i915 0000:00:02.0: irq 117 for MSI/MSI-X
>[    2.318048] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.318061] [drm] Driver supports precise vblank timestamp query.
>[    2.318071] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[    2.318077] [drm:validate_vbt] Using VBT from OpRegion: $VBT VALLEYVIEW     d
>[    2.318083] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.318087] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    2.318092] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    2.318098] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    2.318106] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    2.318111] [drm:parse_lfp_panel_data] VBT initial LVDS value 0
>[    2.318116] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    2.318121] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    2.318126] [drm:parse_driver_features] DRRS State Enabled:1
>[    2.318145] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    2.318233] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0x7ce00000 - 0x7ee00000]
>[    2.318273] [drm:intel_display_power_get] enabling always-on
>[    2.318278] [drm:intel_display_power_get] enabling dpio-common-bc
>[    2.324282] [drm:intel_display_power_get] enabling dpio-common-d
>[    2.342362] [drm:intel_modeset_init] 3 display pipes available.
>[    2.342409] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.342899] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    2.343018] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    2.343639] [drm:intel_dp_init_connector] Adding eDP connector on port C
>[    2.351292] [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe B
>[    2.351320] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    2.351325] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    2.351330] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    2.351339] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    2.351348] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    2.359290] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1
>[    2.391254] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    2.391265] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000d
>[    2.391504] [drm:valleyview_pipestat_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
>[    2.415257] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    2.430310] usb 1-5: new full-speed USB device number 3 using xhci_hcd
>[    2.447258] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[    2.455262] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    2.594892] usb 1-5: No LPM exit latency info found, disabling LPM.
>[    2.596003] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
>[    2.596016] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.608289] tsc: Refined TSC clocksource calibration: 1359.955 MHz
>[    2.750400] usb 1-6: new high-speed USB device number 4 using xhci_hcd
>[    2.915056] usb 1-6: New USB device found, idVendor=0424, idProduct=4604
>[    2.915075] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.916165] hub 1-6:1.0: USB hub found
>[    2.916295] hub 1-6:1.0: 5 ports detected
>[    3.190384] usb 1-6.1: new low-speed USB device number 5 using xhci_hcd
>[    3.298829] usb 1-6.1: New USB device found, idVendor=03f0, idProduct=034a
>[    3.298843] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.298854] usb 1-6.1: Product: HP Elite USB Keyboard
>[    3.298863] usb 1-6.1: Manufacturer: Chicony
>[    3.299160] usb 1-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.299181] usb 1-6.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.310370] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:03F0:034A.0001/input/input7
>[    3.310697] hid-generic 0003:03F0:034A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-6.1/input0
>[    3.321600] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.1/0003:03F0:034A.0002/input/input8
>[    3.321881] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-6.1/input1
>[    3.395423] usb 1-6.2: new high-speed USB device number 6 using xhci_hcd
>[    3.479965] usb 1-6.2: New USB device found, idVendor=1a40, idProduct=0101
>[    3.479979] usb 1-6.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    3.479990] usb 1-6.2: Product: USB 2.0 Hub
>[    3.480908] hub 1-6.2:1.0: USB hub found
>[    3.480961] hub 1-6.2:1.0: 4 ports detected
>[    3.555475] usb 1-6.5: new high-speed USB device number 7 using xhci_hcd
>[    3.608735] Switched to clocksource tsc
>[    3.640008] usb 1-6.5: New USB device found, idVendor=0424, idProduct=2530
>[    3.640024] usb 1-6.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    3.640035] usb 1-6.5: Product: Bridge device
>[    3.754453] usb 1-6.2.4: new high-speed USB device number 8 using xhci_hcd
>[    3.854958] usb 1-6.2.4: New USB device found, idVendor=0b95, idProduct=772a
>[    3.854971] usb 1-6.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.854983] usb 1-6.2.4: Product: AX88x72A
>[    3.854991] usb 1-6.2.4: Manufacturer: ASIX Elec. Corp.
>[    3.854999] usb 1-6.2.4: SerialNumber: 00018D
>[    4.160680] asix 1-6.2.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:fe:91:3d
>[    4.496407] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    4.496416] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    4.496524] [drm:intel_panel_setup_backlight] backlight initialized, disabled, brightness 0/3906, sysfs interface registered
>[    4.496666] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    4.496768] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2
>[    4.497140] [drm:intel_dsi_init] 
>[    4.497162] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    4.504375] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: enabled
>[    4.504398] [drm:intel_modeset_readout_hw_state] [CRTC:18] hw state readout: disabled
>[    4.504418] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
>[    4.504424] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A
>[    4.504430] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
>[    4.504448] [drm:intel_dp_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    4.504453] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: enabled, pipe B
>[    4.504460] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A
>[    4.504465] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: disabled, pipe A
>[    4.504472] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: enabled
>[    4.504478] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled
>[    4.504484] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled
>[    4.504490] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:HDMI-A-2] hw state readout: disabled
>[    4.504497] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:HDMI-A-3] hw state readout: disabled
>[    4.504503] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:DP-2] hw state readout: disabled
>[    4.504511] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[    4.504518] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[    4.504522] [drm:i915_get_vblank_timestamp] crtc 0 is disabled
>[    4.504526] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
>[    4.504533] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[    4.504537] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    4.504540] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    4.504546] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.504551] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.504556] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.504559] [drm:intel_dump_pipe_config] requested mode:
>[    4.504567] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.504570] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.504576] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.504582] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    4.504586] [drm:intel_dump_pipe_config] port clock: 0
>[    4.504589] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    4.504594] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.504599] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.504602] [drm:intel_dump_pipe_config] ips: 0
>[    4.504606] [drm:intel_dump_pipe_config] double wide: 0
>[    4.504614] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B
>[    4.504618] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    4.504622] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    4.504627] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.504632] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    4.504637] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.504641] [drm:intel_dump_pipe_config] requested mode:
>[    4.504647] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    4.504651] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.504657] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    4.504663] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    4.504667] [drm:intel_dump_pipe_config] port clock: 270000
>[    4.504671] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    4.504676] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.504680] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.504684] [drm:intel_dump_pipe_config] ips: 0
>[    4.504687] [drm:intel_dump_pipe_config] double wide: 0
>[    4.504693] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    4.504698] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    4.504702] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    4.504706] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    4.504711] [drm:intel_dump_pipe_config] [CRTC:18][setup_hw_state] config for pipe C
>[    4.504714] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    4.504718] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    4.504723] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.504728] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.504733] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.504736] [drm:intel_dump_pipe_config] requested mode:
>[    4.504743] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.504746] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.504752] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.504758] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    4.504762] [drm:intel_dump_pipe_config] port clock: 0
>[    4.504766] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    4.504770] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.504775] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.504778] [drm:intel_dump_pipe_config] ips: 0
>[    4.504782] [drm:intel_dump_pipe_config] double wide: 0
>[    4.504789] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[    4.504799] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[    4.504804] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    4.504810] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[    4.504815] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[    4.504821] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[    4.504826] [drm:check_encoder_state] [ENCODER:38:TMDS-38]
>[    4.504832] [drm:check_crtc_state] [CRTC:8]
>[    4.504837] [drm:check_crtc_state] [CRTC:13]
>[    4.512351] [drm:check_crtc_state] [CRTC:18]
>[    4.512369] [drm:i9xx_get_plane_config] pipe/plane 1/1 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    4.512380] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000]
>[    4.517731] [drm:gen8_ppgtt_init] Allocated 2 pages for page directories (0 wasted)
>[    4.517736] [drm:gen8_ppgtt_init] Allocated 1024 pages for page tables (0 wasted)
>[    4.517823] [drm:i915_gem_context_init] HW context support initialized
>[    4.517851] [drm:init_status_page] render ring hws offset: 0x00013000
>[    4.518052] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00036000
>[    4.518083] [drm:init_status_page] bsd ring hws offset: 0x00037000
>[    4.518252] [drm:init_status_page] blitter ring hws offset: 0x0005a000
>[    4.518433] [drm:init_status_page] video enhancement ring hws offset: 0x0007d000
>[    4.518606] [drm:intel_ring_workarounds_emit] Number of Workarounds emitted: 4
>[    4.520351] [drm:cherryview_init_gt_powersave] DDR speed: 1600 MHz
>[    4.522344] [drm:cherryview_init_gt_powersave] max GPU freq: 600 MHz (60)
>[    4.524346] [drm:cherryview_init_gt_powersave] RPe GPU freq: 400 MHz (40)
>[    4.526343] [drm:cherryview_init_gt_powersave] RP1(Guar) GPU freq: 400 MHz (40)
>[    4.528346] [drm:cherryview_init_gt_powersave] min GPU freq: 200 MHz (20)
>[    4.530343] [drm:vlv_update_cdclk] Current CD clock rate: 400000 kHz
>[    4.530398] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[    4.530404] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[    4.536627] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.536843] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
>[    4.537104] [drm] Initialized i915 1.6.0 20141024 for 0000:00:02.0 on minor 0
>[    4.564351] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    4.596422] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    4.604363] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    4.604373] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[    4.604382] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    4.604388] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[    4.604393] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[    4.612711] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    4.612719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.620393] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[    4.620401] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[    4.620406] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[    4.636394] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[    4.636402] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[    4.636407] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[    4.695346] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    4.703357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.711351] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[    4.711358] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[    4.711362] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[    4.719595] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[    4.719604] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[    4.727400] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[    4.727410] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[    4.727415] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[    4.743400] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[    4.743408] [drm:drm_setup_crtcs] 
>[    4.743414] [drm:drm_enable_connectors] connector 31 enabled? yes
>[    4.743418] [drm:drm_enable_connectors] connector 22 enabled? no
>[    4.743422] [drm:drm_enable_connectors] connector 27 enabled? no
>[    4.743426] [drm:drm_enable_connectors] connector 29 enabled? no
>[    4.743430] [drm:drm_enable_connectors] connector 37 enabled? no
>[    4.743434] [drm:drm_enable_connectors] connector 39 enabled? no
>[    4.743439] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    4.743443] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    4.743449] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:13]: 1920x1080
>[    4.743454] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    4.743457] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    4.743461] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    4.743465] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping
>[    4.743469] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    4.743474] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 13
>[    4.743482] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    4.754590] [drm:intelfb_create] allocated 1920x1080 fb: 0x000a0000, bo ffff88000297e000
>[    4.754799] fbcon: inteldrmfb (fb0) is primary device
>[    4.754980] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    4.754986] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.754990] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    4.754996] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    4.754999] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip
>[    4.755000] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    4.755006] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.755011] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    4.755013] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=1, fb_changed=1
>[    4.755016] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    4.755021] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    4.755025] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    4.755031] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    4.755044] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    4.755046] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    4.755050] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    4.755052] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B
>[    4.755054] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    4.755055] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    4.755059] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.755062] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    4.755065] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.755067] [drm:intel_dump_pipe_config] requested mode:
>[    4.755072] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    4.755073] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.755078] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    4.755082] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    4.755083] [drm:intel_dump_pipe_config] port clock: 270000
>[    4.755085] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    4.755088] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.755090] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.755092] [drm:intel_dump_pipe_config] ips: 0
>[    4.755093] [drm:intel_dump_pipe_config] double wide: 0
>[    4.756420] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[    4.778353] [drm:intel_edp_backlight_off] 
>[    4.995376] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    5.019426] [drm:edp_panel_off] Turn eDP port C panel power off
>[    5.019431] [drm:wait_panel_off] Wait for panel power off time
>[    5.019438] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    5.060799] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
>[    5.060803] [drm:intel_hpd_irq_handler] digital hpd port C - long
>[    5.060806] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0
>[    5.060856] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
>[    5.063455] [drm:wait_panel_status] Wait complete
>[    5.081414] [drm:intel_dp_link_down] 
>[    5.156459] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[    5.156465] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0
>[    5.174374] [drm:intel_display_power_put] disabling always-on
>[    5.268374] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    5.268378] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    5.620527] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    5.620531] [drm:wait_panel_status] Wait complete
>[    5.620538] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    5.620541] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled
>[    5.651807] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
>[    5.651810] [drm:intel_hpd_irq_handler] digital hpd port C - long
>[    5.651813] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1
>[    5.652035] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
>[    5.740611] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000
>[    5.740625] [drm:cherryview_enable_rps] PCBR offset : 0x7edf8001
>[    5.742436] [drm:cherryview_enable_rps] GPLL enabled? yes
>[    5.742438] [drm:cherryview_enable_rps] GPU status: 0x00282810
>[    5.742441] [drm:cherryview_enable_rps] current GPU freq: 400 MHz (40)
>[    5.742444] [drm:cherryview_enable_rps] setting GPU freq to 400 MHz (40)
>[    5.821488] [drm:edp_panel_on] Turn eDP port C panel power on
>[    5.821493] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    5.821500] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[    5.821502] [drm:wait_panel_status] Wait complete
>[    5.821507] [drm:wait_panel_on] Wait for panel power on
>[    5.821511] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[    5.840445] [drm:valleyview_set_rps] GPU freq request from 400 MHz (40) to 200 MHz (20)
>[    5.975460] [drm:wait_panel_status] Wait complete
>[    5.975466] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[    5.975474] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[    6.007462] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    6.007470] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    6.131465] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    6.179468] [drm:intel_dp_start_link_train] clock recovery OK
>[    6.227471] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    6.243532] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2
>[    6.243535] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2
>[    6.243539] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=61, cursor=2, C: plane=2, cursor=2, SR: plane=107, cursor=2
>[    6.243545] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
>[    6.243553] [drm:intel_edp_backlight_on] 
>[    6.243556] [drm:intel_panel_enable_backlight] pipe B
>[    6.243560] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
>[    6.259521] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680
>[    6.259539] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[    6.259552] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[    6.259555] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    6.259558] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[    6.259562] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[    6.259565] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[    6.259568] [drm:check_encoder_state] [ENCODER:38:TMDS-38]
>[    6.259572] [drm:check_crtc_state] [CRTC:8]
>[    6.259576] [drm:check_crtc_state] [CRTC:13]
>[    6.267477] [drm:check_crtc_state] [CRTC:18]
>[    6.267487] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[    6.267493] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[    6.267496] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    6.267513] Console: switching to colour frame buffer device 240x67
>[    6.267532] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    6.267537] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    6.267539] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    6.290330] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    6.290446] i915 0000:00:02.0: registered panic notifier
>[    6.304186] dracut: Starting plymouth daemon
>[    6.325794] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    6.325802] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    6.325806] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    6.368156] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    6.368165] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    6.368168] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    6.589602] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    6.589943] ACPI: AC Adapter [ADP1] (on-line)
>[    6.624530] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    6.624731] ACPI: Battery Slot [BAT0] (battery present)
>[    6.624930] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    6.625117] ACPI: Battery Slot [BAT1] (battery absent)
>[    6.641263] ACPI Warning: SystemIO range 0x0000000000001040-0x000000000000105f conflicts with OpRegion 0x0000000000001040-0x000000000000104f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
>[    6.641594] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    6.647020] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    6.656184] input: PC Speaker as /devices/platform/pcspkr/input/input10
>[    6.657960] snd_hda_intel 0000:00:1b.0: irq 118 for MSI/MSI-X
>[    6.677218] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>[    6.677381] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    6.677516] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    6.677628] sound hdaudioC0D0:    mono: mono_out=0x0
>[    6.677717] sound hdaudioC0D0:    dig-out=0x1e/0x0
>[    6.677809] sound hdaudioC0D0:    inputs:
>[    6.677884] sound hdaudioC0D0:      Internal Mic=0x12
>[    6.677976] sound hdaudioC0D0:      Rear Mic=0x19
>[    6.678061] sound hdaudioC0D0:      Front Mic=0x18
>[    6.678148] sound hdaudioC0D0:      Line=0x1a
>[    6.716628] iTCO_vendor_support: vendor-support=0
>[    6.717088] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    6.717266] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
>[    6.724886] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    6.724895] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    6.724899] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    6.769619] dracut: Checking ext4: /dev/sda3
>[    6.770204] dracut: issuing e2fsck -a  /dev/sda3
>[    6.787152] dracut: /dev/sda3: clean, 1790148/14368768 files, 21064501/57461248 blocks
>[    6.788581] dracut: Remounting /dev/sda3 with -o ro
>[    6.809997] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    6.819606] dracut: Mounted root filesystem /dev/sda3
>[    6.853105] device-mapper: uevent: version 1.0.3
>[    6.853588] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
>[    6.957040] dracut: Switching root
>[    7.027466] random: init urandom read with 41 bits of entropy available
>[    7.079955] init: plymouth-upstart-bridge main process (2477) terminated with status 1
>[    7.080148] init: plymouth-upstart-bridge main process ended, respawning
>[    7.100175] init: ureadahead main process (2480) terminated with status 5
>[    7.100660] init: plymouth-upstart-bridge main process (2487) terminated with status 1
>[    7.100831] init: plymouth-upstart-bridge main process ended, respawning
>[    7.122879] init: plymouth-upstart-bridge main process (2491) terminated with status 1
>[    7.129047] init: plymouth-upstart-bridge main process ended, respawning
>[    7.451146] systemd-udevd[2606]: starting version 204
>[    7.666545] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    7.666553] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    7.666557] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801443] [drm:i915_gem_open] 
>[    7.801534] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    7.801545] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    7.801551] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801560] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    7.801566] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    7.801571] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801576] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[    7.801581] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[    7.801586] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801621] [drm:i915_gem_open] 
>[    7.801662] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    7.801669] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    7.801674] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801681] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    7.801686] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    7.801691] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801696] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[    7.801701] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[    7.801706] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    7.801734] [drm:i915_gem_open] 
>[    7.801845] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[    7.801855] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[    7.801874] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[    7.801881] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[    7.801885] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[    7.833255] WARNING! power/level is deprecated; use power/control instead
>[    7.841576] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    7.870207] asix 1-6.2.4:1.0 eth4: renamed from eth0
>[    7.876564] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    7.880681] systemd-udevd[2668]: renamed network interface eth0 to eth4
>[    7.884538] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    7.884545] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[    7.884552] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    7.884572] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[    7.929298] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[    7.929311] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[    7.929316] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[    7.940809] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    7.940821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    7.948578] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[    7.948602] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[    7.948608] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[    7.948610] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[    7.956762] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    7.956766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    7.970294] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[    7.970324] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[    7.970328] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[    7.970331] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[    7.985549] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[    7.985589] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[    7.985593] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[    7.985596] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[    8.001513] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[    8.001535] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[    8.001539] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[    8.001542] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[    8.017515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    8.025526] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[    8.025550] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[    8.025557] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[    8.025561] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[    8.041516] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    8.047693] Adding 3998716k swap on /dev/sda1.  Priority:-1 extents:1 across:3998716k SS
>[    8.050537] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[    8.050569] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    8.050574] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[    8.050577] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[    8.056833] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[    8.056837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[    8.065515] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[    8.065535] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    8.065540] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[    8.065543] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[    8.073889] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[    8.073893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[    8.081573] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[    8.081601] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[    8.081605] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[    8.081608] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[    8.092689] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    8.098523] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[    8.098545] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[    8.098551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[    8.098556] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[    8.114551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[    8.114657] [drm:add_framebuffer_internal] [FB:42]
>[    8.817548] init: bluetooth main process (3442) terminated with status 1
>[    8.817590] init: bluetooth main process ended, respawning
>[    8.896791] init: failsafe main process (3355) killed by TERM signal
>[    9.024840] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[    9.024854] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    9.057755] init: bluetooth main process (3543) terminated with status 1
>[    9.057795] init: bluetooth main process ended, respawning
>[    9.227730] asix 1-6.2.4:1.0 eth4: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[    9.452390] asix 1-6.2.4:1.0 eth4: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[    9.633050] init: bluetooth main process (3721) terminated with status 1
>[    9.633082] init: bluetooth main process ended, respawning
>[    9.793930] random: nonblocking pool is initialized
>[    9.871252] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    9.871268] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    9.871275] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    9.871283] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    9.871289] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    9.871294] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    9.871300] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[    9.871305] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[    9.871310] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    9.871415] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[    9.871420] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    9.871423] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:13]
>[    9.898778] init: plymouth-upstart-bridge main process ended, respawning
>[   10.016902] init: bluetooth main process (3819) terminated with status 1
>[   10.016942] init: bluetooth main process ended, respawning
>[   10.089768] init: bluetooth main process (3864) terminated with status 1
>[   10.089828] init: bluetooth main process ended, respawning
>[   10.187370] init: bluetooth main process (3906) terminated with status 1
>[   10.187409] init: bluetooth main process ended, respawning
>[   10.252867] init: bluetooth main process (3935) terminated with status 1
>[   10.252904] init: bluetooth main process ended, respawning
>[   10.312498] init: bluetooth main process (3965) terminated with status 1
>[   10.312533] init: bluetooth main process ended, respawning
>[   10.362341] init: bluetooth main process (3989) terminated with status 1
>[   10.362376] init: bluetooth main process ended, respawning
>[   10.410955] init: bluetooth main process (4013) terminated with status 1
>[   10.410993] init: bluetooth main process ended, respawning
>[   10.458639] init: bluetooth main process (4037) terminated with status 1
>[   10.458676] init: bluetooth respawning too fast, stopped
>[   24.182987] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00040000, dig 0x00000000
>[   24.182998] [drm:intel_hpd_irq_handler] digital hpd port B - long
>[   24.183003] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>[   24.183057] [drm:intel_dp_hpd_pulse] got hpd irq on port B - long
>[   24.220284] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   24.228289] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[   24.228298] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 4) received hotplug event.
>[   24.228303] [drm:i915_hotplug_work_func] Connector DP-1 (pin 4) received hotplug event.
>[   24.228310] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   24.236743] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   24.236751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   24.244334] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   24.284285] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   26.480381] [drm:intel_hpd_irq_event] [CONNECTOR:27:DP-1] status updated from disconnected to connected
>[   26.480475] [drm:drm_fb_helper_hotplug_event] 
>[   26.480484] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[   26.480489] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[   26.504382] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   26.504397] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   26.528381] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   26.560394] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   26.568399] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   26.568410] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[   26.568419] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   26.568425] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   26.568430] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   26.576675] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   26.576683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   26.584383] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   26.584391] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   26.584396] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   26.624421] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   28.825542] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   28.825561] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] probed modes :
>[   28.825570] [drm:drm_mode_debug_printmodeline] Modeline 43:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   28.825577] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.825585] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.825592] [drm:drm_mode_debug_printmodeline] Modeline 44:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   28.825599] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   28.825606] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   28.825614] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   28.825621] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   28.825628] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   28.825635] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   28.825642] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   28.825648] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[   28.825653] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[   28.841446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   28.849490] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[   28.849499] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[   28.849504] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[   28.857762] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[   28.857770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[   28.865491] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[   28.865499] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[   28.865504] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[   28.881492] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[   28.881502] [drm:drm_setup_crtcs] 
>[   28.881509] [drm:drm_enable_connectors] connector 31 enabled? yes
>[   28.881513] [drm:drm_enable_connectors] connector 22 enabled? no
>[   28.881517] [drm:drm_enable_connectors] connector 27 enabled? yes
>[   28.881521] [drm:drm_enable_connectors] connector 29 enabled? no
>[   28.881525] [drm:drm_enable_connectors] connector 37 enabled? no
>[   28.881529] [drm:drm_enable_connectors] connector 39 enabled? no
>[   28.881535] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[   28.881539] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[   28.881545] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:13]: 1920x1080
>[   28.881549] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[   28.881553] [drm:intel_fb_initial_config] connector DP-1 has no encoder or crtc, skipping
>[   28.881557] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[   28.881561] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping
>[   28.881564] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[   28.881568] [drm:intel_fb_initial_config] fallback: Not all outputs enabled
>[   28.881572] [drm:intel_fb_initial_config] Enabled: 1, detected: 2
>[   28.881576] [drm:intel_fb_initial_config] Not using firmware configuration
>[   28.881581] [drm:drm_target_preferred] looking for cmdline mode on connector 31
>[   28.881585] [drm:drm_target_preferred] looking for preferred mode on connector 31
>[   28.881589] [drm:drm_target_preferred] found mode 1920x1080
>[   28.881592] [drm:drm_target_preferred] looking for cmdline mode on connector 27
>[   28.881596] [drm:drm_target_preferred] looking for preferred mode on connector 27
>[   28.881600] [drm:drm_target_preferred] found mode 1920x1080
>[   28.881604] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[   28.881613] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8
>[   28.881619] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 13
>[   28.881634] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[   28.881640] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   28.881644] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[   28.881651] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   28.881658] [drm:drm_mode_debug_printmodeline] Modeline 54:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   28.881663] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
>[   28.881669] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   28.881673] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   28.881678] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   28.881682] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   28.881689] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
>[   28.881695] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[   28.881702] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[   28.881717] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[   28.881721] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[   28.881728] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   28.881732] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   28.881736] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   28.881740] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   28.881746] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   28.881751] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[   28.881756] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   28.881760] [drm:intel_dump_pipe_config] requested mode:
>[   28.881767] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   28.881771] [drm:intel_dump_pipe_config] adjusted mode:
>[   28.881777] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   28.881784] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[   28.881788] [drm:intel_dump_pipe_config] port clock: 270000
>[   28.881792] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   28.881797] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   28.881801] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   28.881805] [drm:intel_dump_pipe_config] ips: 0
>[   28.881809] [drm:intel_dump_pipe_config] double wide: 0
>[   28.883494] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[   28.910480] [drm:intel_edp_backlight_off] 
>[   29.127513] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   29.151507] [drm:edp_panel_off] Turn eDP port C panel power off
>[   29.151517] [drm:wait_panel_off] Wait for panel power off time
>[   29.151525] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[   29.192782] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
>[   29.192790] [drm:intel_hpd_irq_handler] digital hpd port C - long
>[   29.192795] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0
>[   29.192830] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
>[   29.195523] [drm:wait_panel_status] Wait complete
>[   29.213500] [drm:intel_dp_link_down] 
>[   29.288512] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[   29.288521] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0
>[   29.392562] [drm:vlv_detach_power_sequencer] detaching pipe B power sequencer from port C
>[   29.392572] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C
>[   29.392582] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[   29.400513] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   29.400522] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   29.752692] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[   29.752702] [drm:wait_panel_status] Wait complete
>[   29.752712] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   29.752717] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled
>[   29.783976] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
>[   29.783987] [drm:intel_hpd_irq_handler] digital hpd port C - long
>[   29.783993] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1
>[   29.784053] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
>[   29.953549] [drm:edp_panel_on] Turn eDP port C panel power on
>[   29.953562] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   29.953571] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[   29.953576] [drm:wait_panel_status] Wait complete
>[   29.953583] [drm:wait_panel_on] Wait for panel power on
>[   29.953590] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[   30.107545] [drm:wait_panel_status] Wait complete
>[   30.107554] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   30.107564] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[   30.147548] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   30.147560] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   30.263552] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   30.311613] [drm:intel_dp_start_link_train] clock recovery OK
>[   30.359630] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[   30.375692] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2
>[   30.375700] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2
>[   30.375707] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=107, cursor=2
>[   30.375715] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
>[   30.375725] [drm:intel_edp_backlight_on] 
>[   30.375730] [drm:intel_panel_enable_backlight] pipe A
>[   30.375736] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
>[   30.391643] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680
>[   30.391665] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[   30.391681] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[   30.391687] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[   30.391692] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[   30.391697] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[   30.391703] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[   30.391709] [drm:check_encoder_state] [ENCODER:38:TMDS-38]
>[   30.391714] [drm:check_crtc_state] [CRTC:8]
>[   30.399568] [drm:check_crtc_state] [CRTC:13]
>[   30.399577] [drm:check_crtc_state] [CRTC:18]
>[   30.399589] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[   30.399595] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   30.399599] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[   30.399608] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   30.399615] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   30.399620] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=1, fb_changed=0
>[   30.399624] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   30.399629] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   30.399634] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   30.399638] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   30.399643] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   30.399649] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[   30.399655] [drm:connected_sink_compute_bpp] [CONNECTOR:27:DP-1] checking for sink bpp constrains
>[   30.399663] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz
>[   30.399672] [drm:intel_dp_compute_config] DP link bw 06 lane count 4 clock 162000 bpp 24
>[   30.399677] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400
>[   30.399683] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   30.399688] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B
>[   30.399692] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   30.399696] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   30.399701] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   30.399707] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64
>[   30.399712] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   30.399715] [drm:intel_dump_pipe_config] requested mode:
>[   30.399722] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   30.399726] [drm:intel_dump_pipe_config] adjusted mode:
>[   30.399733] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   30.399739] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[   30.399743] [drm:intel_dump_pipe_config] port clock: 162000
>[   30.399747] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   30.399752] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   30.399757] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   30.399761] [drm:intel_dump_pipe_config] ips: 0
>[   30.399764] [drm:intel_dump_pipe_config] double wide: 0
>[   30.645594] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   30.693597] [drm:intel_dp_start_link_train] clock recovery OK
>[   30.817653] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   30.865636] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[   30.881666] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[   30.881676] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=64, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0
>[   30.881699] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680
>[   30.881714] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[   30.881723] [drm:intel_connector_check_state] [CONNECTOR:27:DP-1]
>[   30.881732] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[   30.881737] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[   30.881743] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
>[   30.881748] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[   30.881754] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[   30.881759] [drm:check_encoder_state] [ENCODER:38:TMDS-38]
>[   30.881765] [drm:check_crtc_state] [CRTC:8]
>[   30.889588] [drm:check_crtc_state] [CRTC:13]
>[   30.897632] [drm:check_crtc_state] [CRTC:18]
>[   30.897644] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[   30.897651] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[   30.897656] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   30.897661] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   33.161689] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   33.161703] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   37.222482] [drm:i915_gem_open] 
>[   37.222602] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[   37.222613] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   37.222619] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.222624] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.222631] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[   37.222637] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[   37.222642] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.222647] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.222653] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[   37.222658] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[   37.222663] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.222667] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.253047] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[   37.253055] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   37.253059] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.253062] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.253068] [drm:intel_crtc_set_config] [CRTC:13] [FB:41] #connectors=1 (x y) (0 0)
>[   37.253071] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[   37.253074] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.253076] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.276058] [drm:i915_gem_open] 
>[   37.276121] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   37.278672] [drm:i915_gem_open] 
>[   37.278715] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   37.278726] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   37.280590] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   37.280635] [drm:add_framebuffer_internal] [FB:55]
>[   37.281090] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   37.281102] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   37.281334] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   37.281370] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   37.281952] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   37.281970] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   37.282071] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   37.282088] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   37.282184] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   37.282199] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   37.282298] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   37.282314] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   37.282412] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   37.282427] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   37.555206] [drm:add_framebuffer_internal] [FB:55]
>[   37.556553] [drm:drm_mode_setcrtc] [CRTC:8]
>[   37.556565] [drm:drm_mode_setcrtc] [CONNECTOR:31:eDP-1]
>[   37.556572] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[   37.556580] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[   37.556586] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.556591] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.562947] [drm:i9xx_update_primary_plane] Writing base 00889000 00000000 0 0 7680
>[   37.576709] [drm:drm_mode_setcrtc] [CRTC:13]
>[   37.576725] [drm:drm_mode_setcrtc] [CONNECTOR:27:DP-1]
>[   37.576731] [drm:intel_crtc_set_config] [CRTC:13] [FB:55] #connectors=1 (x y) (0 0)
>[   37.576739] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=1
>[   37.576745] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.576750] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   37.576771] [drm:i9xx_update_primary_plane] Writing base 00889000 00000000 0 0 7680
>[   37.582554] [drm:drm_mode_setcrtc] [CRTC:18]
>[   37.582565] [drm:intel_crtc_set_config] [CRTC:18] [NOFB]
>[   37.582575] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0
>[   37.582581] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   37.582586] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   53.952139] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   53.952151] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[   53.952156] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[   53.975707] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   53.975720] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   53.999622] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   54.031623] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   54.039716] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   54.039727] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[   54.039736] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   54.039766] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   54.040072] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   54.040079] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   54.040085] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   54.079627] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   56.279754] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   56.279778] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] probed modes :
>[   56.279787] [drm:drm_mode_debug_printmodeline] Modeline 43:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   56.279794] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   56.279801] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   56.279809] [drm:drm_mode_debug_printmodeline] Modeline 44:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   56.279816] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   56.279823] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   56.279830] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   56.279837] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   56.279845] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   56.279852] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   56.279859] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   56.279902] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   56.279987] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   56.279994] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[   56.279999] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[   56.295724] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[   56.295746] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   56.295752] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   56.295757] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   56.304226] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   56.304245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   56.311726] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   56.311772] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   56.311779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[   56.311784] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[   56.327684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   56.335726] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[   56.335748] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   56.335754] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[   56.335759] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[   56.344000] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[   56.344009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[   56.351727] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[   56.379221] [drm:add_framebuffer_internal] [FB:56]
>[   56.379383] [drm:drm_mode_setcrtc] [CRTC:8]
>[   56.379394] [drm:drm_mode_setcrtc] [CONNECTOR:31:eDP-1]
>[   56.379401] [drm:intel_crtc_set_config] [CRTC:8] [FB:56] #connectors=1 (x y) (0 0)
>[   56.379410] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[   56.379416] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   56.379420] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   56.391077] [drm:i9xx_update_primary_plane] Writing base 01073000 00000000 0 0 7680
>[   56.394109] [drm:drm_mode_setcrtc] [CRTC:13]
>[   56.394118] [drm:drm_mode_setcrtc] [CONNECTOR:27:DP-1]
>[   56.394123] [drm:intel_crtc_set_config] [CRTC:13] [FB:56] #connectors=1 (x y) (0 0)
>[   56.394130] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=1
>[   56.394135] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   56.394140] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   56.394152] [drm:i9xx_update_primary_plane] Writing base 01073000 00000000 0 0 7680
>[   56.401115] [drm:add_framebuffer_internal] [FB:55]
>[   56.401163] [drm:drm_mode_setcrtc] [CRTC:13]
>[   56.401174] [drm:drm_mode_setcrtc] [CONNECTOR:27:DP-1]
>[   56.401181] [drm:intel_crtc_set_config] [CRTC:13] [FB:55] #connectors=1 (x y) (0 0)
>[   56.401188] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=1
>[   56.401195] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:8]
>[   56.401200] [drm:intel_modeset_stage_output_state] [CONNECTOR:27:DP-1] to [CRTC:13]
>[   56.413308] [drm:i9xx_update_primary_plane] Writing base 00889000 00000000 0 0 7680
>[   56.994791] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   56.994805] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   76.102622] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00040000, dig 0x00000000
>[   76.102633] [drm:intel_hpd_irq_handler] digital hpd port B - long
>[   76.102639] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>[   76.102691] [drm:intel_dp_hpd_pulse] got hpd irq on port B - long
>[   76.118658] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[   76.118667] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 4) received hotplug event.
>[   76.118673] [drm:i915_hotplug_work_func] Connector DP-1 (pin 4) received hotplug event.
>[   76.118680] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   76.127021] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   76.127029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   76.134653] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   76.150680] [drm:intel_hpd_irq_event] [CONNECTOR:27:DP-1] status updated from connected to disconnected
>[   76.153399] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   76.153446] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   76.153453] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[   76.153464] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[   76.176678] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   76.176692] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   76.200622] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   76.232627] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   76.240641] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   76.240652] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[   76.240661] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   76.240680] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   76.240955] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   76.240962] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   76.240968] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   76.256624] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[   76.256649] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   76.256656] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[   76.256660] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[   76.272624] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[   76.272640] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   76.272646] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   76.272651] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   76.281057] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   76.281070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   76.288626] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   76.288658] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   76.288664] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[   76.288669] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[   76.304584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   76.312684] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[   76.312700] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   76.312706] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[   76.312710] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[   76.321063] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[   76.321082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[   76.328652] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[   79.187763] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   79.187778] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   87.995098] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00040000, dig 0x00000000
>[   87.995109] [drm:intel_hpd_irq_handler] digital hpd port B - long
>[   87.995115] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>[   87.995168] [drm:intel_dp_hpd_pulse] got hpd irq on port B - long
>[   88.035158] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   88.043246] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[   88.043255] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 4) received hotplug event.
>[   88.043260] [drm:i915_hotplug_work_func] Connector DP-1 (pin 4) received hotplug event.
>[   88.043267] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   88.051562] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   88.051570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   88.059236] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   88.099155] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   90.291257] [drm:intel_hpd_irq_event] [CONNECTOR:27:DP-1] status updated from disconnected to connected
>[   90.293709] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6]
>[   90.293760] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   90.293768] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[   90.293774] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[   90.317292] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   90.317305] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   90.339261] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   90.371259] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   90.379274] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   90.379285] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[   90.379294] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   90.379312] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   90.379569] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   90.379576] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   90.379580] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   90.419313] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   92.619387] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   92.619406] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] probed modes :
>[   92.619415] [drm:drm_mode_debug_printmodeline] Modeline 43:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   92.619422] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   92.619429] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   92.619437] [drm:drm_mode_debug_printmodeline] Modeline 44:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   92.619444] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   92.619451] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   92.619458] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   92.619466] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   92.619473] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   92.619480] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   92.619488] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   92.619505] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   92.619589] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   92.619596] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[   92.619601] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[   92.635362] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[   92.635381] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   92.635387] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   92.635392] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   92.643830] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   92.643843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   92.651363] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   92.651394] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   92.651401] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[   92.651406] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[   92.667322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   92.675434] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[   92.675450] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   92.675456] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[   92.675460] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[   92.683662] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[   92.683674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[   92.691436] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[   93.332399] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   93.332413] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   94.649721] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   94.649732] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[   94.649738] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[   94.673543] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   94.673556] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   94.697459] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   94.729463] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   94.737496] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   94.737507] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[   94.737516] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   94.737548] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   94.737805] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   94.737812] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[   94.737818] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[   94.777462] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
>[   96.975589] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   96.975614] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] probed modes :
>[   96.975624] [drm:drm_mode_debug_printmodeline] Modeline 43:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   96.975631] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   96.975638] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   96.975646] [drm:drm_mode_debug_printmodeline] Modeline 44:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   96.975653] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   96.975660] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   96.975668] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   96.975675] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   96.975682] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   96.975689] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   96.975697] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   96.975732] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   96.975807] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   96.975813] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2]
>[   96.975818] [drm:intel_dp_detect] [CONNECTOR:39:DP-2]
>[   96.991557] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:39:DP-2] disconnected
>[   96.991581] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   96.991588] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1]
>[   96.991592] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1]
>[   96.999956] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   96.999964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   97.007559] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected
>[   97.007581] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   97.007588] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2]
>[   97.007592] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-2]
>[   97.023518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   97.031561] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-2] disconnected
>[   97.031583] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   97.031589] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3]
>[   97.031594] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-3]
>[   97.039861] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
>[   97.039869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[   97.047560] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:HDMI-A-3] disconnected
>[   97.684598] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   97.684612] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

Actions: View

Attachments on bug 85641: 108680 | 111801 | 111802

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.